Mario's Hat by Pixel-Kakashi - With Lines
-
Upload
sienteelfactorf -
Category
Documents
-
view
1.804 -
download
4
Transcript of Mario's Hat by Pixel-Kakashi - With Lines
Mario's HatBy: -Pixel Kakashi
http://pixel-kakashi.blogspot.com
Here are the instructions for Mario's hat,
The parts are layed out as below:
Cut out parts toA1 A5
*Note: You don't need to score the folds, just the tabs on A3
Glue to using the graphic from the last pageas reference
A1 A3
Now glue to the firstA2 two parts
Now glue part A4
Now you got the first part of the hat
Now cut out parts toB1 B4
A1B1
Next glue to like in the picture belowB1 A1
Do the same with andB2 A2
Glue to the parts you just glued ( + )B3 B1A1
Do the same with on the other sideB4
Now cut and (they look like eyebrows, I know)B9 B10
Glue under and underB9 B3 B10 B4
From now on, the model is pretty straight foreward,there's only 4 pieces left on the sheet, so cut them
out and glue them in order to form the "M"
Keep glueing the other parts in order( and )C1-C6 D1-D6
C1
C2
C3
C4
C5C6
D6
D5
D4
D3
D2
D1
Now cut andC7-C9 D7-D9 and glue themto the back
C7C8
C9
D7D8
D9
It's almost over now, just a few more pieces,it's quite simple, just keep glueing them in order.
And we're done!
Now you can enjoy your very own Mario Hat
Thanks for building this model.
http://pixel-kakashi.blogspot.com
http://pixel-kakashi.blogspot.com
http://pixel-kakashi.blogspot.com
http://pixel-kakashi.blogspot.com