Maquina Automatica Vertical Koike VUP NA3 (EGW)

download Maquina Automatica Vertical Koike VUP NA3 (EGW)

of 12

Transcript of Maquina Automatica Vertical Koike VUP NA3 (EGW)

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    1/12

    CUTTING, POSITIONING & WELDING EQUIPMENT

    KOIKE ARONSON RANSOME

    Koike knows Tanks from Top to Bottom

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    2/12KOIKE ARONSON, INC. / RANSOME

    AGWSeriesAGW-I / AGW-II

    Automatic Girth Welders

    Koike Aronson / Ransomes AGW Automatic Girth Welder is antomatic system that speeds up construction of field-erected storage

    nks. It straddles the shell plates riding on adjustable flanged wheelsoperator controlled speeds of 4 to 105 IPM (.102.67 M/min). It canndle plates as thick as 2 inches and tank diameters from 15 feet and. Available as dual or single sided machines. Each is equipped with

    elding heads, controls, flux support belts and recovery units so that 3d 9 oclock welds can be made simultaneously. The Lincoln NA-3lid state control and welding head fitted with nozzles, wire feed rolls,aighteners and 50 Lbs. (22.7Kg) wire reels for either single or Twin-c wire are standard. Submerged arc flux belt mechanism ensurestention of the flux at the joint, and efficient recycling of flux. Openc models are available upon request.

    Effectively cuts welding timeup to 40%

    Adjustable frame for plates 6fto 10ft tall (1.8m-3m)

    Unlimited tank diametersdown to 15 in diameter

    High / low rapid travel selectcontrols

    Self propelled at speeds from4 to 105 IPM

    Plates up to 2 thick

    Single and Double sidedoperation

    Features

    Adjustable for plates from 6 to 10 tall

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    3/12

    Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009

    Phone (585) 492-2400 Fax (585) 457-3517

    www.koike.com

    SpecificationsAutomatic Girth Welders

    Adjustable tubular frame for plates 6ft to 10ft tall (1.8m-3.05m)Min. 20ft(6.1m) to an Unlimited tank diameter rangeTravel speeds 4-105 ipm(.10-2.67 m/min)

    Speed, direction and rapid travel select controls (Master side)

    Average welding speed is approximately 30 ipm(.762 m/min)with a deposition rate of 11# per hour. (per side)

    Includes

    Operator's Platform with seatLincoln NA-3 Wire Feeder and ControlLincoln DC-600 orDC-1000 Power SourceVertical AdjusterHorizontal AdjusterFlux Belt AssemblyFlux Recirculating System

    Lincoln Tiny Twin Wire KitPre-Heat TorchService Skid with DisconnectTropicalized Controls.Weather Curtains200 feet of Control Cable AssemblyLoading Safety WheelsOperator Communication System (AGW-II Only)Operators ManualTool Kit

    NA-5 Controls Available CE-Mark Compliant Models Available Custom Engineered Models Available

    Notes:

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    4/12KOIKE ARONSON, INC. / RANSOME

    Weighs less than,000 Lbs. (450 Kg.)

    Koike Aronson / Ransomes AGW-LW Light Weight Automatic GirthWelder is an automatic system that speeds up construction of thinwalled field-erected storage tanks. It straddles the shell platesriding on adjustable flanged wheels at operator controlled speeds of

    4 to 105 IPM (.102.67 M/min). It can handle plates as thin as3/16 inches and tank diameters down to 12. Equipped with weldinghead, controls, flux support belts and recovery unit for 3 oclockwelding. Standard Lincoln controls and welding head, straightenerand 50 Lbs. (22.7Kg) wire reel included. The adjustable submergedarc flux belt mechanism ensures retention of the flux at the joint,and efficient recycling of flux.

    40% Lighter than standardAGW-I

    Effectively cuts welding timeup to 40%

    Adjustable frame for plates 6ftto 10ft tall (1.8m-3m)

    12 Tank diameters and up

    High/low rapid travel selectcontrols

    Self propelled at speeds from4 to 105 IPM

    Plates down to 3/16 thick

    AGWSeriesAGW-LW Light Weight

    Automatic Girth Welders

    Thin Walled, Small Diameter

    Features

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    5/12

    Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009

    Phone (585) 492-2400 Fax (585) 457-3517

    www.koike.com

    SpecificationsLW-Automatic Girth Welders

    Adjustable tubular frame for plates 6ft to 10ft tall (1.8m-3.05m)Min. 12ft(5.6m) to an Unlimited tank diameter rangeTravel speeds 4-105 ipm(.10-2.67 m/min)

    Speed, direction and rapid travel select controls

    Average welding speed is approximately 30 ipm(.762 m/min)with a deposition rate of 11# per hour

    Includes

    Operator's Platform with seatLincoln NA-3 Wire Feeder and ControlLincoln DC-600 orDC-1000 Power SourceVertical AdjusterHorizontal AdjusterAdjustable Flux Belt AssemblyFlux Recirculating System

    Pre-Heat TorchService Skid with DisconnectTropicalized Controls.Weather Curtains and Roof200 feet of Control Cable AssemblyLoading Safety WheelsOperators ManualTool Kit

    NA-5 Controls Available AC/DC Power Wave Available Open Arc models Available Custom Engineered Models Available Stainless Wheels Kits Available

    Notes:

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    6/12KOIKE ARONSON, INC. / RANSOME

    The Koike Aronson/Ransome Single Pass Vertical-Up Welder

    UP) can complete 10-12 vertical seams on a field erected storagenk with 8 tall x 1 thick seams in one work shift. X-Ray quality weldsth one operator and one machine.The frame consists of a vertical column mounted on a manual or

    ptional powered carriage and roller assembly that rides on the topge of the tank shell.Lift controls include up/down switch, high/low speed

    otentiometers and rapid speed selector that control a variable speedotor that is electronically integrated with the welding control, whichtomatically adjusts speed to maintain the optimum nozzle to weldddle relationship.

    A Lincoln NA-3 head and control is supplied with two K-176ozzles for welding with either 3/32 or .120 diameter NR-431nershield wire. The NA-3 head is mounted on a free moving slideoviding manual lateral adjustment. An air operated bracket supportsarticulated copper shoe assembly.

    X-Ray Quality Welds

    Single Pass Operation

    Adjustable frame for plates 6ftto 10ft tall (1.8m-3m)

    Unlimited tank diameters

    Optional Powered Oscillatorfor 1-1/4 to 3 plate

    Optional Powered LateralTravel

    Features

    VUPSeriesVERTICAL-UP WELDER (VUP)

    10 to 12 Vertical Tank Seams in One ShiftWith Deposition Rates of 48 Lbs./hr

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    7/12

    Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009

    Phone (585) 492-2400 Fax (585) 457-3517

    www.koike.com

    SpecificationsVertical-Up Welders

    ncludes

    Lincoln NA-3 Wire Feeder and ControlLincolnDC-1000 Power SourceVertical Support ColumnFront and Rear Sliding ShoeWater RecirculatorPower SkidLifting Bale

    Input Power DisconnectTropicalized Controls.200 feet of Control Cable AssemblyManual orPowered Lateral TravelOperators ManualTool Kit

    Multi-Pass MIG Models Available Portable Track Guided Models Available Custom Engineered Models Available

    Notes:

    Koike Aronson / Ransomes

    single pass Vertical-Up welding

    system for field constructionwelds 20 times faster than

    conventional stick electrodes.

    No joint preparation is required,square butt design saves constructiontime and money.

    Adjustable for plates from 6 to 10 tall

    Single-Pass Process for Mild Steel

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    8/12KOIKE ARONSON, INC. / RANSOME

    The VUP-MIG is designed for an Open Arc welding processwith a gas shield. Bi-Directional welding travel, w/controlled

    Speed, Self supporting, No additional to mount to plates. Allcomponents will be integrated onto the lift column. The columnwill support all welding equipment, including Power Source andGas Cylinder.

    Ideal for Nickel or StainlessPlates

    Adjustable frame for plates6ft to 10ft tall (1.8m-3m)

    Unlimited tank diameters

    Up/down, high/low rapidtravel select controls

    Rack and Pinion Drive forpositive vertical motion

    Manual or OptionalPowered lateral travel formoving from joint to joint

    Adjustable Frame for Plates 6 to 10

    VUPSeriesVERTICAL-UP MIG WELDER

    (VUP-MIG) Features

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    9/12

    Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009

    Phone (585) 492-2400 Fax (585) 457-3517

    www.koike.com

    SpecificationsVertical-Up Welders

    ncludes

    Vertical Support Column.Welding Head support table with Support RollersCross Slide to provide in-out, right left and heightadjustment (Manual)Torch Weaver (Oscillator) (KSK WU-1 Weaver)Operators ControlsPower source platform mountGas Cylinder mount

    Lifting Bale.230/380/460V - 3PH 50/60HZ.Tropicalized Controls.Manual or Powered Lateral TravelOperators ManualTool Kit

    Optional Removable Operator platform (Not Shown)

    Recommended Welding EquipmentSupplied and integrated by Koike,or Customer Supplied

    K-1728-4 V350-Pro Power SourceK-1559-3 LN-10 Wire Feeder w Wire Reel and CoverKP-1505-045 Drive RollsWork Cable w/ Ground Clamp400 Amp Mechanized Torch,Gas Connection Kit w/ gas Regulator

    Single Pass Verti-Shield Models Available Portable Track Guided Models Available Custom Engineered Models Available

    Notes:

    Koike WU-1 Weaver Control

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    10/12KOIKE ARONSON, INC. / RANSOME

    Operator access to both horizontal &vertical seams without scaffolding

    Koike Aronson / Ransomes Shell Buggy is the ideal solutionfor manual operations during tank construction. Supported offthe top shell of the tank, the compact work platform provides theoperator access to both horizontal and vertical seams for up to10 plates. Used for preparation, cleaning or repair without the

    need for scaffolding. Fold down steps or power elevationprovide the operator with a full reach of the entire vertical seam.Powered and manual traverse options are available, with largelifting eyes for loading and unloading on/off the tank shell.Flanged wheels and safety fingers allow use on up to 1 thickmaterial.

    Up to 10 plates

    300 Lbs. (112Kg.) weightcapacity

    Unlimited tank diametersdown to 15 in diameter

    Plate thicknesses up to 1

    Manual or powered horizontatravel

    Manual or powered elevation

    26 x 50 work platform area

    Manual pulley drive fortraversing and fold down

    steps for elevation

    shown

    Optional Powered traverse driv e

    OPTIONSSHELL BUGGY

    Manual or Powered Travel, andower Elevating options available

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    11/12

    Koike Aronson Inc.P.O. Box 307, Arcade, New York 14009

    Phone (585) 492-2400 Fax (585) 457-3517

    www.koike.com

    Used for both wired andengine driven power sources

    Skids can be attached directly toVUP or AGW, reducing cable lengthand wind-up problems. Configuredfor any power source and supportequipment required for machine.Rotary grounds attached to wheelaxles provide constant ground currentconduction.

    Highly Productive Welding from a Compact MachineLight, compact, 4WD, magnetic force traction and a low c

    of gravity allows this series of machines to achieve the highespulling power and stability in the marketplace today. Utilizing strong magnet, vertical and horizontal fillet welding is possiblethe standard unit. The Stitch Welding and Twin Torch Weldincome with multiple options to cover wide range of welding nee

    WEL-HANDY MULTIMULTI-PURPOSE AUTOMATIC WELDING CARRIAGE

    Sub-Arc and MIG compatible Optional WU-1 oscillating weaver option

    available

    TOW BEHIND POWER SKIDS

    OPTIONS

  • 8/22/2019 Maquina Automatica Vertical Koike VUP NA3 (EGW)

    12/12

    KOIKE ARONSON, INC. / RANSOME635 West Main Street

    P.O. Box 307,Arcade, New York 14009

    Phone (585) 492-2400Fax (585) 457-3517

    Toll Free: 800-252-5232

    www.koike.com

    Contact Koike Aronsons World Wide Positioner Sales:

    1-585-492-2400 x 480

    [email protected]

    CUTTING, POSITIONING & WELDING EQUIPMENT