Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
-
Upload
kenny-casilla -
Category
Documents
-
view
223 -
download
0
Transcript of Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
1/17
1
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
2/17
Going it alone can be tough.
The dictionary definition of a partnership is
A relationship between individuals or groups that is characterised by mutualcooperation and responsibility, as for the achievement of a specified goal.
The key work there for me is mutual. Mutual involvement for mutual benefit.
Maptek has a strong history of partnership.
Last year Maptek turned 30.
If you read or heard the story about how it got started you will know that
partnership was key.
Bob was working as a consultant and constrained by the preparation of plans,
limiting his ability to work. The operation was also held back by the plan
preparation delay so there was a mutual problem.
Vulcan was Bobs solution to that problem and partnerships with sites were
essential to Vulcans development.
Partnership remains an essential part of product development.
The 4400 scanners were the first to incorporate digital cameras and telescope,
creating simple field workflows. The ideas were the result of a partnership;
discussions between Pete Johnson and a surveyor.
This event is all about partnership. You the industry experts, who daily use our
products to solve challenges. And you have a partnership with each other as
peers in your profession, as shown by your willingness to present and share your
2
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
3/17
experience for the mutual benefit of others.
Eureka and BlastLogic which you will here more about this week are both a direct
result of partnerships.
Today I am going to take you through a function in I-Site Studio that came about
through a partnership.
2
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
4/17
Venetia Mine
First 4400 in South Africa
EOM processing too long
"I want to be able to model the new area, push one button and have it
automatically put into the previous months surface and I'm sure if you guys think
about it you can do it."
3
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
5/17
Need to be able to update advancing faces
Insert models of new areas into existing model.
4
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
6/17
Create boundary of update.
Recreate surface, splitting at boundary.
Top down projection only and potential loss of integrity.
OR
Create boundary.
Copy above and below.
Create temporary intersecting surfaces.
Fragment.
Copy, paste and repair any inconsistencies.
Manual and tedious.
5
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
7/17
I-Site Studio 3.1.1 released September 2008.
6
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
8/17
Combination surface one button update.
More: highest and lowest.
Multiple simultaneous updates.
7
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
9/17
Xstrata Glendell: Requirement to survey blast surfaces safely and efficiently.
No walking over broken ground minimum delay picking up before dozer push
starts.
8
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
10/17
Vehicle mount scanning for increased safety, efficiency and improved field of
view.
9
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
11/17
Dual models: Asbuilt and void.
Weekly update.
Surface data only no breaklines!
Full detail of batters including overhangs.
6 months or so of easy use.
10
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
12/17
Combination surface struggled with size of models.
Complicated computations in overlap area.
Updating scan models into previously scanned area encountered problems.
11
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
13/17
12
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
14/17
13
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
15/17
Live data workup.
14
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
16/17
Reliable, successful method.
Data capture and update by cadet or graduate surveyors.
No longer automatic single button operation challenge to developers!
The solution came about through partnership.
Working together to solve the problems Derrin faced on-site and improving our
workflow and product to the mutual benefit of our users.
15
-
8/13/2019 Maptek Australia2012 James Moncrieff Partnering for Success Survey Tools
17/17
So I encourage you to take advantage of this week.
Many of our developers are here so take the chance to corner one of them and
talk about the challenges you are experiencing.Our role in the technical services groups is to facilitate the partnership.
Make us your first call when you have a problem.