Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s...

18
1 Manual

Transcript of Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s...

Page 1: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 1

Manual

Page 2: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 2

Content

1. Features 3

2. Package contents 3

3. The case at a glance 4

4. Installation notes 6

5. Installation of a mainboard 7

6. Installation of a PSU 10

7. Installation of a HDD 11

7.1 3.5" HDD cage 11

7.2 Mounting frame 12

8. Installation of an optical device 13

9. Installation of a 3.5" device 15

10. Installation of an add-on card 17

11. The pre-installed fans 17

Dear customer!

Congratulations for purchasing this premium quality SHARKOON product.For a long life time and to take full advantage of this product we recommend you to read this manual completely.

Have a good time with our product!SHARKOON Technologies

Page 3: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 3

1. Features

• ATXcase• 2x5.25"drivebays(external)• 6x3.5"HDDbays(internal)• 2x2.5"/3.5"HDDbays(internal)• FrontI/Owith2xUSB3.0(internal19-pinmainboardconnector),2xUSB2.0,2xaudio• Acrylicsidepanel• 7slotsforadd-oncards• Meshfrontpanel• Quickfastenersforopticaldrives,mainboardmountingpanelwithinstallationopening for coolers• 2openingsforwatercooling• Cablemanagementsystem• Dimensions:475x200x440mm(LxWxH)• Weight:6.6kg• Fanconfiguration:

Case front 2x120mmLEDfansRear panel 1x120mmLEDfan

2. Package contents

• T28(3x120mmpre-installedLEDfans)• Accessoryset:

Screwsformainboard mounting

ScrewsforPSUmounting Screws for drive mounting Screws for HDD mounting

Stand-offsformainboard Washers Lockattachment(A)andspeaker(B)

Mountinganglesfor3.5"devices

A

B

Page 4: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 4

Note:Ifyouaremissinganyoftheitemslistedabove,pleasecontactourcustomerserviceimmediately:[email protected](GermanyandEurope)[email protected](international).

MountingrailsforHDDs 5.25"bezelwith3.5"opening

3. The case at a glance

Front view

A–FrontI/O: a–PowerLED b–USB3.0connectors c – Audio connectors d–USB2.0connectors e–PowerandHDDLEDB–5.25"drivebaysC– covered:pre-installed120mmfans

Side view (closed/left)

A – Acrylic side panel

a b c d e

A A

A

B

C

Page 5: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 5

Side view (opened/left)

A–Drivebaysfor5.25"devicesB–Mainboardmountingpanelwith: a– InstallationopeningforCPUcoolers and b –Cablemanagementsystem

Rear view

A–OpeningforI/OshieldB–Pre-installed120mmfanC–SlotbezelsD – Openings for water coolingE–PSUbracketF–Thumbscrews

Bottom view

A – Case feetB–AirintakeforPSU

A

A

A

A

A

A

B

B

B

C

D

E

F

FF

F

a

b

Page 6: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 6

The internal I/O connectors

A – HD audio B–2xUSB2.0connectors C–Connectorsfor: a – Power switch b–PowerLED– c –Power-LED+ d–HDD-LED e–Reset-Switch

4. Installation notes

1.ForfurtherinformationonhowtoinstallthePCcomponents,pleasealsorefertotheir respective instructions.

2.ThecenterHDDcagecanberemovedfromthecase,sothatVGAcardsupto40cmin lengthcanbeinstalled.

State of delivery

A B C

a

b c d e

Page 7: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 7

InordertoremovetheHDDcages,proceedasfollows:

1.Unscrewthethumbscrewsonthebacksideofthecaseandremovebothsidepanels.

2.Press/lifttheattachmentleversoftheHDDcage(fig.1).

fig.1

3.DragtheHDDcagetowardsyou.

5. Installation of a mainboard

1.Openthecasebylooseningthethumbscrewsonthecase’sbacksideandremoving theleftsidepanel.Laydownthecasesidewiseonanevensurface.

2.Themainboard’smountingpanelinsidethecaseprovidesvariousdrillingstofixthe stand-offs(fig.2).

fig.2

Page 8: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 8

Themainboardcontainsspecialscrewopenings(fig.3).

fig.3

Placethemainboardtothemountingpanel.Astand-offmustbescrewedintoevery drillingofthemountingpanelvisiblethroughthemainboard’sscrewopenings.

3.Removethemainboardandscrewthestand-offsintotherespectivedrillingsofthe mountingpanel(fig.4).

(Stand-offs)

fig.4

Page 9: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 9

4.PresstheI/Oshield(deliveredwiththemainboard)intotheI/Oshieldopeninginthe case’sbackside.

5.Placethemainboardbackontothestand-offsandscrewthemainboardtothem(fig.5).

(Screwsformainboardmounting)

fig.5

6.Plugtheconnectorsofthecase’sfrontbezeltotherespectiveconnectorsofthe mainboard(alsorefertoyourmainboard’smanualforfurtherinformation).

Page 10: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 10

fig.6

2.ScrewthePSUtothecasefromtheoutside(fig.7).

(ScrewsforPSUmounting)

fig.7

6. Installation of a PSU

1.SetupthecaseinfrontofyouandputthePSUfromtheinsideagainstthePSUbracket onthecase’sbackside(fig.6).

Page 11: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 11

(HDDmountingrails)

fig.8

3.SlidetheHDDwithattachedmountingrailsintoanavailabledrivebayinsidethe3.5" HDDcage(fig.9).

fig.9

4.ConnecttheHDDtothepowersupplyandthemainboard.

7. Installation of a HDD

7.1 3.5" HDD cage

1.Removethecase’srightsidepanel.

2.Attachthemountingrailstothe3.5"HDDfrombothsides(fig.8).

Page 12: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 12

1.TakeamountingframefromtheHDDcage(fig.10).

(Mountingframe)

fig.10

2.PlaceanHDDintothemountingframe(connectorspointingbackwards/fig.11aandb).

Abb.11a Abb.11b

7.2 Mounting frame

Page 13: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 13

3.AttachtheHDDtothemountingframefrombelow(fig.12aandb).

fig.12a fig.12b

4.SlidethemountingframeintotheHDDcageuntilitlocks(fig.13).

fig.13

8. Installation of an optical device

1.Removethecase’sfrontpanelbygentlydraggingittowardsyou(fig.14).

fig.14

Page 14: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 14

2.Dismantlethe5.25"frontbezelfromthemountingbayinwhichyouintendtoinstall thedrivebylooseningitsscrewsandpushingthebezeltotheinside(fig.15).Remove thequickfasteners(fig.16).

fig.15 fig.16

(Carefullytakeoutanoptionallypresentmetalbezelcoveringthe3.5"drivebayby usingagripper.)

3.Slidetheopticaldriveintothecase’sdrivebay(fig.17).

fig.17

4.Attachtheopticaldevicefrombothsidesusingthequickfasteners(fig.18).

fig.18

Page 15: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 15

fig.19 fig.20 (Incasethereisametalbezelcoveringthedrivebay,removeitbyusingagripper.)

3.Screwthemountinganglestothe3.5"devicefrombothsides(fig.21).

(Mountingangles)

Note: If you intend to transport the case we recommend securing (additionally) the installed drives.

5.Connecttheopticaldrivetothepowersupplyandthemainboard.(Putthefrontbezel backontothecase.)

9. Installation of a 3.5" device

(1.Removethecase’sfrontpanelbygentlydraggingittowardsyou.)

2.Dismantlethe5.25"frontbezelfromthemountingbayinwhichyouintendtoinstall thedrivebylooseningitsscrewsandpushingthebezeltotheinside(fig.19).Remove thequickfasteners(fig.20).

Page 16: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 16

fig.21

4.Slidethe3.5"devicewithattachedmountingrailsintothecase’sdrivebay(fig.22)and screwittothedrivebayfrombothsides(fig.23).

fig.22 fig.23

5.Connectthe3.5"devicetothepowersupplyandthemainboard.

6.Screwthe5.25"bezelwith3.5"openingintothefrontpanel(fig.24)andplaceitback onto the case.

5.25"bezelwith3.5"opening

fig.24

Page 17: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 17

10. Installation of an add-on card

1.Removetheslotbezel’sfixationscrewandtakeawaytheslotbezel(fig.25).

fig.25

2.Inserttheadd-oncardintothemainboard’srespectiveslotandfixittothecasebyre- attachingthefixationscrew(fig.26).

fig.26

11. The pre-installed fans

1.Thepre-installed120mmfrontfansprovidea4-pinPSUconnectoranda3-pin mainboardplug.

Page 18: Manual - Sharkoon€¦ · 4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and screw it to the drive bay from both sides (fig. 23). fi.g

T28 18

2.ConnectoneofbothplugstoeithertherespectivePSUor(tocontrolthefanspeedvia themainboard)thematchingmainboardconnector.

Legal disclaimer:

AsacontinuingpolicyofproductimprovementatSHARKOON,thedesignandspecifica-tionsaresubjecttochangewithoutpriornotice.Nationalproductspecificationsmayvary.

Allrightsreservedespecially(alsoinextracts)fortranslation,reprinting,reproductionbycopyingorothertechnicalmeans.Infringementswillleadtocompensation.

Allrightsreservedespeciallyincaseofassignationofpatentorutilitypatent.Meansofdeliveryandtechnicalmodificationsreserved.

Disposal of your old productYourproductisdesignedandmanufacturedwithhighqualitymaterialsandcomponents,whichcanberecycledandreused.

Whenthiscrossed-outwheeledbinsymbolisattachedtoaproduct,itmeanstheproductiscoveredbytheEuropeanDirective2002/96/EC.Pleasebeinformedaboutthelocalseparatecollectionsystemforelectricalandelectronicproducts.Please act according to your local rules and do not dispose of your old products with your normalhouseholdwaste.Thecorrectdisposalofyouroldproductwillhelppreventpotenti-al negative consequences to the environment and human health.

© SHARKOON Technologies 2012www.sharkoon.com

A–3-pinpowerconnectorB–4-pinpowerconnector

AB


Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9.

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9.

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7

Installation Instructions - Forward Lift6. Lift Setting: Position columns in bay using dimensions shown in Fig. 1a & Fig. 1b. Place column with power unit mounting bracket on vehicle

Installation Instructions - Forward Lift6. Lift Setting: Position columns in bay using dimensions shown in Fig. 1a & Fig. 1b. Place column with power unit mounting bracket on vehicle

CIPWC Re: Morton Bay Fig

CIPWC Re: Morton Bay Fig

2008 BMW F800GS - RevZilla.com€¦ · i946-411 2008 BMW F800GS- 4 12 Secure the PCIII in place using the supplied velcro (Fi.g J). PCIII ground wire PCIII ground wire Fig. J. 13

2008 BMW F800GS - RevZilla.com€¦ · i946-411 2008 BMW F800GS- 4 12 Secure the PCIII in place using the supplied velcro (Fi.g J). PCIII ground wire PCIII ground wire Fig. J. 13

Manual de utilizare motocoasa pe roti · Fig. cg Fig. DI Fig. CIO Fig. Fig. 7 Fig. 8 . Fig. DB Fig. D4 Fig. El Fig. Fl Fig. E-2 Fig. F2 . Fig. F4 Fig. F5 Fig. G Fig. H Fig. F-3 Fig.

Manual de utilizare motocoasa pe roti · Fig. cg Fig. DI Fig. CIO Fig. Fig. 7 Fig. 8 . Fig. DB Fig. D4 Fig. El Fig. Fl Fig. E-2 Fig. F2 . Fig. F4 Fig. F5 Fig. G Fig. H Fig. F-3 Fig.

FIG TREE BAY COMPLEX...ΚΑΤΟΙΚΙΕΣ FIG TREE BAY COMPLEX B B A A B B TV LIVING ROOM DINING ROOM KITCHEN VERANDA Ar. ergoy Elegxow Sxedio 7 6 8 Hmeromhnia Klimaka F E D 5 6 7

FIG TREE BAY COMPLEX...ΚΑΤΟΙΚΙΕΣ FIG TREE BAY COMPLEX B B A A B B TV LIVING ROOM DINING ROOM KITCHEN VERANDA Ar. ergoy Elegxow Sxedio 7 6 8 Hmeromhnia Klimaka F E D 5 6 7

Buzzards Bay Geographic Response Plan for Oil-Spill Mitigation · the coastline of the Bay (Table 1; Fig. 1). The discussion of each of these locations included in this report alludes

Buzzards Bay Geographic Response Plan for Oil-Spill Mitigation · the coastline of the Bay (Table 1; Fig. 1). The discussion of each of these locations included in this report alludes

The Corner Building (Block e) · Fig.6.5.3 Bay study of Catteshall Lane Fig.6.5.1 Upper floor plan Fig.6.5.2 Ground floor plan e e e e e Residential entrances 98 622_091111_DAS_FINAL.indd

The Corner Building (Block e) · Fig.6.5.3 Bay study of Catteshall Lane Fig.6.5.1 Upper floor plan Fig.6.5.2 Ground floor plan e e e e e Residential entrances 98 622_091111_DAS_FINAL.indd

Chinook salmon and green sturgeon migrate through San ...€¦ · Francisco Bay between July 10th and August 8th, 2014 (Fig 1). A cross-bay array of acoustic biotelemetry receivers

Chinook salmon and green sturgeon migrate through San ...€¦ · Francisco Bay between July 10th and August 8th, 2014 (Fig 1). A cross-bay array of acoustic biotelemetry receivers

 · 2019. 5. 21. · FN1664-E FN1664SP-E FIG. 7 FIG. 8 FIG. 9 FIG. 10 FIG. 11 FIG. 12a FIG. 12b FIG. 13 FIG. 14 FIG. 15 FIG. 16 FIG. 17 FIG. 18 FIG. 19 FIG. 20 FIG. 21 5 BOSTITCH

 · 2019. 5. 21. · FN1664-E FN1664SP-E FIG. 7 FIG. 8 FIG. 9 FIG. 10 FIG. 11 FIG. 12a FIG. 12b FIG. 13 FIG. 14 FIG. 15 FIG. 16 FIG. 17 FIG. 18 FIG. 19 FIG. 20 FIG. 21 5 BOSTITCH

Florida Bay - USGS · 2007-05-22 · Bay enters from the northeast through the Taylor River (fig. 2). Fresh water also enters the northeastern portion of the bay as overflow from

Florida Bay - USGS · 2007-05-22 · Bay enters from the northeast through the Taylor River (fig. 2). Fresh water also enters the northeastern portion of the bay as overflow from

Chapter 20 Paleoecology Studies in Chesapeake Bay: A Model ... · environment interact (Fig. 1). The mid-Atlantic region now occupied by the Bay and adjacent coastal plain was inundated

Chapter 20 Paleoecology Studies in Chesapeake Bay: A Model ... · environment interact (Fig. 1). The mid-Atlantic region now occupied by the Bay and adjacent coastal plain was inundated

Hudson Bay Ice Conditions - University of Calgarypubs.aina.ucalgary.ca/arctic/Arctic24-2-90.pdf · HUDSON BAY ICE CONDITIONS 91 FIG. 1. General map of Hudson Bay with inset showing

Hudson Bay Ice Conditions - University of Calgarypubs.aina.ucalgary.ca/arctic/Arctic24-2-90.pdf · HUDSON BAY ICE CONDITIONS 91 FIG. 1. General map of Hudson Bay with inset showing

Holocene Environmental Change in the Frobisher Bay Area ... · SQUIRES and G.H. MILLER INTRODUCTION Frobisher Bay (Fig. 1 ) is formed in a major trough or graben which extends from

Holocene Environmental Change in the Frobisher Bay Area ... · SQUIRES and G.H. MILLER INTRODUCTION Frobisher Bay (Fig. 1 ) is formed in a major trough or graben which extends from

Mangrovezonationandutilizationbythelocalpeople in Ajuy and … · 2017-02-04 · Fig. 2 Study areas at Pedada Bay, Panay, Island (in red dots) (NAMRIA, 2003). Fig. 3 Dendrogram showing

Mangrovezonationandutilizationbythelocalpeople in Ajuy and … · 2017-02-04 · Fig. 2 Study areas at Pedada Bay, Panay, Island (in red dots) (NAMRIA, 2003). Fig. 3 Dendrogram showing

Keweenaw Bay Natural Resources Departmentnrd.kbic-nsn.gov/sites/default/files/WFIndex_WildRice...Keweenaw Bay, and most recently Huron Bay (Fig.1). Four sites have been improved (wild

Keweenaw Bay Natural Resources Departmentnrd.kbic-nsn.gov/sites/default/files/WFIndex_WildRice...Keweenaw Bay, and most recently Huron Bay (Fig.1). Four sites have been improved (wild

Invasion of Japanese shores by the NE Pacific barnacle Balanus … · hira or Sasazaki, Ofunato Bay (Fig. 2: Stn 24), but was abundant 6 km south of Konpaku, Yoshihama Bay (Fig. 2:

Invasion of Japanese shores by the NE Pacific barnacle Balanus … · hira or Sasazaki, Ofunato Bay (Fig. 2: Stn 24), but was abundant 6 km south of Konpaku, Yoshihama Bay (Fig. 2:

Ecosystem-based management and models in …Fig. 1. Map of Xincun Bay with sampling locations Fig. 2. Histogram of aquaculture area in 90’s of Xincun Bay 98 Mac Rawson, Changsheng

Ecosystem-based management and models in …Fig. 1. Map of Xincun Bay with sampling locations Fig. 2. Histogram of aquaculture area in 90’s of Xincun Bay 98 Mac Rawson, Changsheng

Decline of the Chesapeake Bay oyster population: a … · Rothschild et al.: Decline of the Chesapeake Bay oyster population 31 Fig. 2. of the Chesapeake Bay wlth shaded area showlng

Decline of the Chesapeake Bay oyster population: a … · Rothschild et al.: Decline of the Chesapeake Bay oyster population 31 Fig. 2. of the Chesapeake Bay wlth shaded area showlng