Manifold Scissor Through Wall - Revision 9
-
Upload
abacus-healthcare -
Category
Documents
-
view
217 -
download
3
description
Transcript of Manifold Scissor Through Wall - Revision 9
150mm
Centreline of Bath
Scissor Lift Through Wall - Right Hand Bath
10mm minimum (edge of bath to wall)
10mm minimum (edge of bath to wall)
150mm
Centreline of Bath
Scissor Lift Through Wall - Left Hand Bath
10mm minimum (edge of bath to wall)
10mm minimum (edge of bath to wall)
Electrical Connections
450mm
20mm
Optional - only neededfor whirlpool baths.
IP65 rated cable outlet wired to a 5 amp fused spur at high level outsidethe bathroom (13 amp fuse for whirlpool).
Fig. 1
Aquanova Rising Baths Pre-Installation Instructions
Abacus Healthcare Services Ltd, Unit 1 Millennium Way, High Carr Business Park, Newcastle-under-Lyme, ST5 7XE
Tel: 01782 569330 Fax: 01782 569349
www.abacushealthcare.co.uk e-mail: [email protected]
P1 / SBAQ1-9 - issue 9 - 01.04.11
Technical Details - All Aquanova baths rise full of water
1700mm
1550mm
1700mm
585mm400mm750mm 550mm
Fig. 2 Fig. 3
Fig. 4Fig. 5
Internal tub length 1550
Internal tub width 550
Internal tub depth 400
Transfer height (lowest position) 585
Height of lift 350
Fill volume 200 litres
Filling time 4.2 mins @ 0.5 bar pressure
Raising time 18 seconds
Lowering time 12 seconds
Maximum floor loading 400Kgs (equivalent to 1.56Kg/sq cm)
Electrical 24volt battery operation (automatic charging)
Water 22mm steel braided flexible hose with BSPswivel ends
1700mm
750mm
a
b
Note: It is the responsibility of the client to determine the location of thebath in relation to the walls adjacent to the bath (a & b) in Fig. 4