Management regulations for the Environment Hazardous ...
12
04 版(04 editions) 零組件及材料中的環境危害物質之管理規定 Management regulations for the Environment Hazardous Substances to be controlled which are included in parts and materials 一、目的(Purpose) 盟創科技股份有限公司為因應國際法律規章及客戶之要求，特制定本公司產品之 環境相關物質規格管理作業程序，以確保產品具備市場競爭力。 MitraStar Communications Corporation for in accordance to the international laws, regulations and the customer request, especially formulates environment of correlation matter specification management operational procedure this company products, guarantees the products to have the market competition. 二、定義(Definition) 2.1 管理級別：依以下管理級別進行管理。 Management standards : To manage the above-mentioned substances, the following levels are used. 一級 ：對於該物質及其用途立即禁止使用。 Level Ⅰ: The substances and/or their purposes classified at this level are those whose use must be banned immediately. 二級 ：可以使用，但限制使用濃度標準。 Level Ⅱ: Can be used, but restricting the use of concentration criteria. 三級 ：可以使用，目前無明確限用濃度。但可因客戶要求立即修改。 Level Ⅲ: Can be used, is currently not explicitly restrict a concentration. Immediately modify but can be tailored to customer requirements. 2.2 使用時機(using the time) 零組件、材料請依分級管理，禁止使用、濃度限值下可供貨、或皆可使用 Components, materials management, under the prohibition of the use, the concentration limits available, or can be used. 2.3 均質材料(Homogeneous material) 指用機械拆分(如削、鑽、磨、割等)方法無法再分的材質。而均質為同樣的 成分組成均勻分佈在整個材料中。 均質材料的均勻成份構成或形態，一般如塑膠、合金、塗料、玻璃和陶瓷等 即是。
Transcript of Management regulations for the Environment Hazardous ...
Management regulations for the Environment Hazardous Substances to
be controlled which are included in parts and materials
(Purpose)
correlation matter specification management operational procedure this company
products, guarantees the products to have the market competition.
(Definition)
following levels are used.
Level : The substances and/or their purposes classified at this level are those
whose use must be banned immediately.
Level : Can be used, but restricting the use of concentration criteria.
Level : Can be used, is currently not explicitly restrict a concentration.
Immediately modify but can be tailored to customer requirements.
2.2 (using the time)
Components, materials management, under the prohibition of the use, the
concentration limits available, or can be used.
2.3 (Homogeneous material)
04(04 editions)
Mechanical splitting (such as cutting, drilling, grinding, cutting, etc) can no
longer be material. Homogeneous for the same composition evenly throughout
the material.
Even components of homogeneous material constitutes or forms, such as plastics,
alloys, coatings, glass and ceramics, that is.
2.4 (Packaging materials)
(Contains a range of products from raw materials to processing completed) by
the producer to the user or consumer, use, protection, can be mounted using
features such as, routing and delivery of any material, results in a product.
(Management standards for “Environment
Hazardous Substances to be Controlled”)
3.1 (Environment Hazardous Substances to be Controlled)
No
Substances
Limit
(mg/kg)
2 (Cd)
3 (Hg)
4 (Cr
+6 )
5 (PBB)
7 Bis(2-ethylhexyl) phthalate
9 Dibutyl phthalate(DBP) 1000
10 Diisobutyl phthalate(DIBP) 1000
REACH()
https://echa.europa.eu/regulations/reach/candidate-list-substances-in-articles
1000
12
3.2
3.2
targets”(Allowable concentration), Standards for measurement
(Pb)
)
for parts anddevices (the leaded solder whose lead
content is at least 85 wt%)
following alloys:
lead
Aluminum alloys Less than 0.4 wt%
Copper alloys
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Cd)
materials
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Hg)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Cr +6
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(PBB)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
04(04 editions)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(2-)(DEHP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(BBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(DBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(DIBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
REACH()
In accordance with the specification of EU REACH
Regulation Annex XVII
2
1000
containing other brominated flame retardants
Currently
unlimited
Management rules for packaging materials
()In accordance with the specification of EU reach appendix 17
Heavy metals (mercury, cadmium, lead, and hexavalent chromium)
materials and coatings
Pb + Cd + Hg +
Currently
unlimited
ISO 17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Purpose)
correlation matter specification management operational procedure this company
products, guarantees the products to have the market competition.
(Definition)
following levels are used.
Level : The substances and/or their purposes classified at this level are those
whose use must be banned immediately.
Level : Can be used, but restricting the use of concentration criteria.
Level : Can be used, is currently not explicitly restrict a concentration.
Immediately modify but can be tailored to customer requirements.
2.2 (using the time)
Components, materials management, under the prohibition of the use, the
concentration limits available, or can be used.
2.3 (Homogeneous material)
04(04 editions)
Mechanical splitting (such as cutting, drilling, grinding, cutting, etc) can no
longer be material. Homogeneous for the same composition evenly throughout
the material.
Even components of homogeneous material constitutes or forms, such as plastics,
alloys, coatings, glass and ceramics, that is.
2.4 (Packaging materials)
(Contains a range of products from raw materials to processing completed) by
the producer to the user or consumer, use, protection, can be mounted using
features such as, routing and delivery of any material, results in a product.
(Management standards for “Environment
Hazardous Substances to be Controlled”)
3.1 (Environment Hazardous Substances to be Controlled)
No
Substances
Limit
(mg/kg)
2 (Cd)
3 (Hg)
4 (Cr
+6 )
5 (PBB)
7 Bis(2-ethylhexyl) phthalate
9 Dibutyl phthalate(DBP) 1000
10 Diisobutyl phthalate(DIBP) 1000
REACH()
https://echa.europa.eu/regulations/reach/candidate-list-substances-in-articles
1000
12
3.2
3.2
targets”(Allowable concentration), Standards for measurement
(Pb)
)
for parts anddevices (the leaded solder whose lead
content is at least 85 wt%)
following alloys:
lead
Aluminum alloys Less than 0.4 wt%
Copper alloys
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Cd)
materials
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Hg)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(Cr +6
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(PBB)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
04(04 editions)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(2-)(DEHP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(BBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(DBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
(DIBP)
17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
REACH()
In accordance with the specification of EU REACH
Regulation Annex XVII
2
1000
containing other brominated flame retardants
Currently
unlimited
Management rules for packaging materials
()In accordance with the specification of EU reach appendix 17
Heavy metals (mercury, cadmium, lead, and hexavalent chromium)
materials and coatings
Pb + Cd + Hg +
Currently
unlimited
ISO 17025
Standards for measurement: Test method of homogenous materials must be in accordance
with the standards of the IEC 62321, and test reports required
by ISO 17025 validation laboratory.
