Instruction ManualBowl Turning

Attachment

CL3B

IMPORTANTFor your safety read instructions carefully before assembling this product.Save this manual forfuture reference.

Woodworking Machines & AccessoriesTelephone: 0870 770 1777Facsimile: 0870 770 1888

Record Power LtdUnit B, Adelphi WayStaveley S43 3LS

Email: sales@recordpower.co.ukhttp://www.recordpower.co.uk

1. Assembly Instructions

2. Usage & Application

fig.1

fig.4

fig.2

fig.3

Positioning & AdjustmentThe most comfortable position for turning a particular workpiece can be obtained not only by adjusting the various components of the end turning unit but also by swivelling the headstock to the optimum angle and by adjusting its position along the bed bars. See fig.3 for a typical arrangement of the bowl rest.

Fitting The Bracket To The LatheTo assemble the unit, simply remove the end bracket at the headstock end of the machine and fix the turning bracket in its place. Then assemble the swivel bracket as shown in fig.1 & fig.2. This unit can be left on the machine when turning between centres etc.

Normal Duty workFor normal duty work the swivel bracket clamping screw is sufficient to secure the swivel bracket in position but if movement is anticipated then the swivel bracket secondary screw should also be tightened. fig.4.

Thin workFor thin work the headstock can be swivelled to give maximum clearance for the turning tool handle fig.5.

fig.6

fig.5

Heavy Duty WorkFor exceptionally heavy duty work the end bracket from the standard machine can be inocorporated fig.6. The following extra parts will be required for this application:M12 nut (ZABX)Bolt (ZABM)Washer (ZABO)Cast washer (ZED)Angle strap (ZIF)

3. Parts Diagrams

5. Genuine Record Power AccessoriesApproved Accessories & Spares Available In The Record Power Range of Woodturning Products.

4. CL3B Parts List

ZJZ End Turning Bracket 1BOST Swivel Bracket 1BOEB Clamping Screw For Banjo 1BOES Clamping Screw For Swivel Bracket 1CLK1 Plastic Knob 2ZIS Handle - Long 2ZOP Stem For Tubular Bowl Rest 1ZOO Tube For Tubular Bowl Rest 1ZABM Nut - M12 3ZABO Washer - M12 3ZAES Washer - Large 1ZABP Washer - M10 1ZACO Screw - M12 x 65mm 1ZACQ Screw - M10 x 30mm 1

PART DESCRIPTION No. QTY

GENERAL FITMENTSLathe BenchBowl Turning Rest17” Tool Rest10” Tool Rest5” Tool Rest

CONSUMABLESFriction Polish - White ‘Speedaneez’Friction Polish - Standard ‘Speedaneez’Carnuba WaxSpindle Oil – (100ml)Spindle Oil – (250ml)

CHUCKS & FACEPLATESGeared Scroll ChuckLever Scroll ChuckWoodscrew Chuck Heavy Duty 2-1/2”Woodscrew Chuck Medium Duty 2-1/2”Faceplate, Cast Iron 4”Faceplate, Cast Iron 6”

CENTERS AND SPINDLE ADAPTORS4-Spur Center – 7/8” Dia., No.1 Morse Taper2-Spur Center – 5/8” Dia., No.2 Morse TaperRing Center90 Degree Back CenterCup CenterRevolving (Live) CenterRevolving (Live) Center, Heavy DutyShell Augers w/o Handle, 30” x 5/16”Long Hole Boring KitDrill Chuck, 1/2” CapacityDrill Chuck, 3/4” Capacity, GearedNo.1 Morse Taper for CWA 140No.1 Morse Taper for CWA 150Threaded Protector Center Ejector

HSS TURNING TOOL SETSSet of 6 HSS Turning Tools: 3/4” Roughing Gouge, 1” Skew Chisel. 1/8” Parting Tool, 1/4”, 3/8” & 1/2” Spindle Gouges.Set of 8 HSS Turning Tools: 3/4” Roughing Gouge, 1” Skew Chisel. 1/8” Parting Tool, 1/4”, 3/8”, 1/2” Spindle Gouges, 1/4” Deep Bowl Gouge & 3/4” Domed Scraper.

RPLB 24-48CL3BCLO/HCLO/JCL0/K

CWA190CWA191CWA200RPSO-100RPSO-250

RP4000RP3500CWA 61CWA 62CWA 70CWA 71

CWA 80CWA 81CWA 90CWA 91CWA 92CWA 93CWA 100CWA 111CWA 131CWA 140CWA 150CWA 160CWA 161CWA 170

RPCHS6

RPCHS8

INDIVIDUAL HSS TURNING TOOLSRoughing Gouge: 3/4”Roughing Gouge: 11/4”Spindle Gouge: 1/4”Spindle Gouge: 3/8”Spindle Gouge: 1/2”Skew Chisel: 1/2”Skew Chisel: 3/4”Skew Chisel: 1”Skew Chisel: 11/4”Square End Chisel: 3/4”Square End Chisel: 1”Parting and Beading Tool: 1/8”Parting and Beading Tool: 3/8”Deep Bowl Gouge: 1/2”Deep Bowl Gouge: 1/4”Domed Scraper: 1/2”Domed Scraper: 3/4”Domed Scraper: 1”Straight ScraperFull Round ScraperDomed ScraperHalf Round Left Hand ScraperHalf Round Right Hand ScraperSkew Left Hand ScraperSkew Right Hand ScraperOval Skew Chisel: 3/4”Oval Skew Chisel: 1”Oval Skew Chisel: 11/4”

BEARINGS, SPINDLES & BELTSBack Bearing for CL2, CL3 & CL4Bronze Bearing for CL2, CL3 & CL4Back Bearing for CL1 & CL5Front Bearing for CL1 & CL5Drive Belt for CL4Drive Belt for CL2 & CL3Drive Belt for CL1 & CL5Main Spindle for CL2, CL3 & CL4Main Spindle for CL1 & CL5

CH 100CH 120CH 200CH 210CH 220CH 300CH 310CH 320CH 330CH 410CH 420CH 500CH 520CH 600CH 601CH 700CH 701CH 702CH 800CH 810CH 820CH 830CH 831CH 840CH 841CH 900CH 910CH 920

ZACGZJRZABDZABECL4/ICL3/ICL0/I ZJTZBQ

DESCRIPTIONPART NO. DESCRIPTIONPART NO.