Making FCC Erdas from AWiFS/LISS-III individual bands data
-
Upload
sonal-aggarwal -
Category
Technology
-
view
1.302 -
download
2
description
Transcript of Making FCC Erdas from AWiFS/LISS-III individual bands data
1
2
4
Steps to convert AWiFS/LISS-III individual bands data in to FCC using ERDAS
2
3
5
1- Click on “Interpreter” feature
2- Select “Utilities” from the list of options
3- Then select “Layer Stack” utility, a panel for input/output file will appear
4- Click on input file icon
5- Select file type as TIFF
66
6- Browse to the folder having desired files. List of files with band numbers will appear.
7
7-Select file and click on “Add” button. Repeat this for each file you want to gives as input.
8
9
8- Select the output file icon
9- Give the filename and select file format as TIFF
Note: output file format can be made as .img also
11
10
10- Check the box “Ignore Zero in Stats”
11- Then “OK”
12
12- Once you click “OK”, it will process the input files and create output file at the provided
location
14
13
15
13- Now select “Viewer” option
14- Click open file icon
15- Select the output file and click “OK”, an image will be displayed in the viewer
16
17
16- To change the default Band Combinations, choose Raster option
17- Select “Band Combination” feature
1818
18- An image will appear with default setting using Band# 5, 4, 3 (i.e. Layer 4, 3, 2 in ERDAS)
for RGB.
Note: BAND# 2,3,4,5 corresponds to File/Layer 1,2,3,4 in ERDAS
19
20
19
19- Change default setting from Band# 5, 4, 3 (i.e. Layer 4, 3, 2 in ERDAS) as RGB
to Band# 4,3,2
20- Click “OK” to see the FCC image in the viewer
For further queries – please contact – [email protected]