Magnetic pulley type BM MAGNETIC DRUM TYPE BMR-N Constructed on NdFeB magnets provides high...

download Magnetic pulley type BM MAGNETIC DRUM TYPE BMR-N Constructed on NdFeB magnets provides high intensity

of 31

  • date post

    22-Jan-2020
  • Category

    Documents

  • view

    9
  • download

    1

Embed Size (px)

Transcript of Magnetic pulley type BM MAGNETIC DRUM TYPE BMR-N Constructed on NdFeB magnets provides high...

  • E2017EN

    Magnetic pulley type BM

    FEATURES

    • Self-cleaning from captured metals.

    • Can be adapted to all types of belt conveyors.

    • It perfectly complements operation of the magnetic separator suspended over the belt conveyor.

    • Rugged construction ensuring long service life.

    VERSIONS

    Magnetic pulley type BMF - constructed on ferrite magnets provides medium intensity of magnetic

    field and intended for removal of tramp metal contaminations such as: bolts, rivets, nails, tools, broken off

    machine parts etc. from the transported material.

    Magnetic pulley type BMN - constructed on NdFeB magnets with high intensity of magnetic field and

    intended for removal of small pieces of tramp iron, filings, rust and other low magnetic susceptibility

    contaminants from the transported material.

    Electromagnetic pulley type BME - constructed on high-power electromagnet supplied with DC with

    high magnetic field range and intended for removal of large-size iron scrap.

    E2014-06PL

    Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, info@magnetix.com.pl

  • Ferrous scrap recovery from municipal waste. Ferrous scrap recovery from metallurgical slag.

    Removal of tramp iron from wood chips. Removal of fine iron contaminants from grain.

    EXAMPLE PROJECTS

    DESIGN

    • The magnetic pulley: the permanent magnet packets mounted under the shell on the steel construction and protected against moving with epoxy resin.

    • The electromagnetic pulley: the winding composed by aluminium wire with reinforced insulation and supplied with DC.

    • The pulley shell made of non-magnetic stainless steel.

    • The shaft made of quality steel with increased strength and mounted with the expanding rings.

    OPTIONS

    • The pulley surface features a barrel shape for more precise centering a conveyor belt movement.

    • The pulley surface covered with rubber lining with diamond shaped groves that is attached to the pulley with special cold adhesives.

    • Double row barrel bearings located in the dustproof split housings.

    • Automatic lubricators.

    • NORD geared motor or of other manufacturer's on customer request.

    • Driven roller as splitter.

    Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, info@magnetix.com.pl

  • TECHNICAL DATA

    Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, info@magnetix.com.pl

    X B

    D

    Diameter Belt width Layer high Belt speed Weight

    D (mm) B (mm) X (mm) (m/s) (kg)

    BM 25-50 500 105

    BM 25-60 600 130

    BM 25-65 650 135

    BM 25-80 800 160

    BM 25-100 1000 190

    BM 25-120 1200 220

    BM 25-140 1400 250

    BM 32-50 500 160

    BM 32-60 600 190

    BM 32-65 650 210

    BM 32-80 800 250

    BM 32-100 1000 300

    BM 32-120 1200 350

    BM 32-140 1400 400

    BM 40-60 600 310

    BM 40-65 650 330

    BM 40-80 800 400

    BM 40-100 1000 480

    BM 40-120 1200 560

    BM 40-140 1400 640

    BM 40-160 1600 720

    BM 50-60 600 470

    BM 50-65 650 500

    BM 50-80 800 600

    BM 50-100 1000 720

    BM 50-120 1200 850

    BM 50-140 1400 1000

    BM 50-160 1600 1150

    BM 63-65 650 700

    BM 63-80 800 800

    BM 63-100 1000 1000

    BM 63-120 1200 1200

    BM 63-140 1400 1400

    BM 63-160 1600 1600

    BM 63-180 1800 1800

    BM 80-80 800 1100

    BM 80-100 1000 1400

    BM 80-120 1200 1700

    BM 80-140 1400 2000

    BM 80-160 1600 2300

    BM 80-180 1800 2600

    BM 80-200 2000 3000

    500

    630

    800

    1,6

    2,0

    2,5

    1 0

    0 ÷

    1 8

    0 1

    2 0

    ÷ 2

    2 0

    8 0

    ÷ 1

    4 0

    Type

    250

    320

    400

    0,8

    1,0

    1,3

    3 0

    ÷ 5

    0 4

    0 ÷

    7 0

    6 0

    ÷ 1

    0 0

  • E2017EN

    Magnetic filter type FM

    Magnetix - ulica Poznańska 9, Cierpice, 87-103 Toruń 5, T: 56 653 94 40, poczta@magnetix.com.pl

    E2014-10EN

    FEATURES

    • Magnetic field intensity achieve 12 000 Gs.

    • Semi-automatic cleaning from captured metals.

    • Separator effectiveness above 99% when frequently cleaned. o• Operating temperature of up to 200 C.

    • Working pressure of up to 10 bar.

    CLEANING METHOD

  • Filter installed horizontally for removal of fine iron contaminants from liquid chocolate.

    Filter installed vertically for removal of fine iron contaminants from liquid chocolate.

    Magnetix - ulica Poznańska 9, Cierpice, 87-103 Toruń 5, T: 56 653 94 40, poczta@magnetix.com.pl

    DESIGN

    • The magnetic bars made of high-power neodymium (NdFeB) magnets. Product temperature of up o

    to 120 C.

    • The coats of magnetic bars made of wear resistant titanium steel.

    • Filter casing resistant to pressure of up to 5 bar made of high quality stainless steel.

    • The drain plug facilitating the filter washing.

    • Connection orifices.

    OPTIONS

    o• High temperature samarium-cobalt magnets (SmCo). Product temperature of up to 300 C.

    • Filter casing resistant to pressure of up to 10 bar.

    • Hot water jacket for products thickening with decrease in temperature (eg. chocolate). Inlet 1/2".

    • Mechanical filter stopping non-magnetic foreign bodies.

    Openwork filter for removal of fine iron contaminants from liquid chocolate.

    Tub filter for removal of iron contaminants from liquid ceramic body.

    EXAMPLE PROJECTS

  • TECHNICAL DATA

    Magnetix - ulica Poznańska 9, Cierpice, 87-103 Toruń 5, T: 56 653 94 40, poczta@magnetix.com.pl

    Pipeline Working

    pressure Weight

    D (mm) (bar) fluid medium viscous (kg)

    FM 5P 5 50 ÷ 75 Semiauto. 5 4 ÷ 8 3 ÷ 7 2 ÷ 5 ~30

    FM 6P 6 75 ÷ 100 Semiauto. 5 8 ÷ 10 7 ÷ 8 5 ÷ 7 ~40

    FM 7P 7 100 ÷ 150 Semiauto. 5 10 ÷ 45 8 ÷ 27 7 ÷ 18 ~60

    FM 9P 9 150 ÷ 200 Manual 5 45 ÷ 80 27 ÷ 49 18 ÷ 33 ~90

    FM 11P 11 200 ÷ 250 Manual 5 80 ÷ 120 49 ÷ 74 33 ÷ 49 ~140

    FM 15P 15 250 ÷ 300 Manual 5 120 ÷ 140 74 ÷ 85 49 ÷ 57 ~210

    Type Bars

    quantity Cleaning

    Flow rate (l/s)

  • E2017EN

    Magnetic plate type PMF / PMN

    Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, info@magnetix.com.pl

    E2014-03EN

    Over the belt

    or at the material discharge

    Cascade

    configuration

    oSloped chute < 60

    MOUNTING METHODS

    MAGNETIC PLATE TYPE PMF

    Constructed on ferrite magnets provides medium intensity of magnetic field intended for removal of

    tramp metal contamination such as bolts, rivets, nails etc. from the transported material.

    MAGNETIC PLATE TYPE PMN

    Constructed on NdFeB magnets provides high intensity of magnetic field intended for removal of small

    pieces of tramp iron, filings, rust and other low magnetic susceptibility contaminants from the

    transported material.

  • EXAMPLE PROJECTS

    DESIGN

    • Ferrite or neodymium (NdFeB) permanent magnets.

    • The plate housing made of non-magnetic steel and tightly welded.

    • The flange for screwing down in the chute or eyebolt for hanging over the conveyor.

    • The hinge (option) facilitating removal of the captured metals from the plate.

    • Raised pole pieces (option) hindering the removal of captured metals by falling material.

    • Travelling construction (option) enabling the plate sliding out of the material discharge.

    Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, info@magnetix.com.pl

    Removal of tramp iron from wood chips. The plate mounted on the travelling construction to sidle out of the wood chip chute.

    Removal of fine iron contaminants from sugar. Removal of ferrous contamination from limestone flour.

  • TECHNICAL DATA

    LEGEND

    A - The magnetic plate length in the direction of material flow. The higher transport speed, the longer plate is required.

    B - The magnetic plate width. Corresponds to the chute width or material stream width on the belt. The magnetic plates are available with width from 150 to 2000 mm.

    C - Thickness of the magnetic plate. Corresponds to the quantity of packed magnetic material.

    CB

    A

    Hinge

    Flange

    Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, info@magnetix.com.pl

    A C Weight

    (mm) (mm) (kg/dm)

    PMF 17-…/65 FERRITE 170 65 5,0

    PMF 25-…/65 FERRITE 250 65 8,0

    PMN 17-…/40 NdFeB 170 40 4,0

    PMN 17-…/65 NdFeB 170 65 8,0

    PMN 25-…/40 NdFeB 250 40 6,0

    MaterialType

  • E2017EN

    Magnetic block type PMT

    FEATURES

    • Magnetic circuit with high range and magnetic field strength.

    • High coercive force magnetic material.

    • No power consumption.

    • Easy cleaning from captured metals.

    • Adaptation to all types of belt conveyors.

    • Rugged construction ensuring long service life.

    Magnetix - Poznanska 9, Cierpice, PL / 87-103 Torun 5, T: +48 56 653 94 40, info@magn