MAGNETIC OIL LEVEL GAUGES - · PDF fileOil level gauges with fixed and adjustable...
Transcript of MAGNETIC OIL LEVEL GAUGES - · PDF fileOil level gauges with fixed and adjustable...
OIL LEVEL GAUGES FOR INSTALLATION IN THE CONSERVATOR OF TRANSFORMERS
[MTO] SERIES-RM
OIL LEVEL GAUGESMAGNETIC
E-LevelGauges-4s.qxd 09.10.2001 12:54 Uhr Seite 2
[MTO] SERIES
Product description
The MTO-ST160RM level gauge is a measuring device with andwithout switching contacts. They are ideally suited to measuring theoil levels in the conservators of transformers.
The level gauge consists of a sensor and a display unit (Fig. 2), whichare linked separately. The sensor unit (Fig. 1) consists of a sealedflange plate and is installed directly in the wall of the conservator.The float arm transfers the rise and fall of the float to the spindle.This spindle is connected via a magnetic clutch to a pointer spindlein the display unit.The movement of the float is normally radial to the casing. The „G“version is recommended for installation in narrow or flat conserva-tors in which only limited movement is possible or in conservatorswith a rubber bag. In this case the float movement is axial to thecasing and the display can be scaled at a ratio of 1:1 or 1:2.
This level gauge can be supplied with either one or two micro-switches.
Materials: MTO-ST160RM
Housing Sheet steel, galvanized, acrylic coated, paint RAL 7038 similar to ANSI 70 light grey Flange Aluminum AlCuMgPb F38View glass Laminated safety glass
Brass, galvanized, passivatedElectrical connection: Flying leads; ANSI- or Westinghouse connectorDial Anodised aluminum; dial background black, characters and pointer yellow or white Float arm Aluminum Al 99.5 or brassFloat Rohacell 110, oil resistant, temperature resistant up to 160 °C
MTO-ST160RM
Fig. 2Fig. 1
E-LevelGauges-4s.qxd 09.10.2001 10:42 Uhr Seite 3
Oil level gauges with fixed and adjustable microswitches
The MTO-ST160RM oil level gauge has a removable front ring. It can be supplied without, or witheither one or two microswitches (Adjustable see Fig. 3/Fixed see Fig.4).
The electrical connection can be either an ANSI- or Westinghouse connector (see Fig. 5) or flying leads (see Fig.6).
Fig. 3 Fig. 4
Fig. 5 Fig. 6
Specifications: MTO-ST160RM
Dial lettering LO-25°-HI or CRITICAL LO-LO-25°-HI (other lettering on request)Ambient temperature -40 – +80 °CProtection mode IP55 to DIN VDE 0470-1 (similar to NEMA 3, IEC 529).
These instruments are ventilated and remain mist free up to 80 % RH.Location Indoors and out of doors, tropicalized
Microswitch MTO-ST160RM
Adjustable switches:Contact material Silver Cadmium Oxide AgCdO101 or 2 switches, fully adjustableContact rating:5 A @ 110/250 VAC; cos� =1 0.6 A @ 110 VDC (non inductive)0.4 A @ 250 VDC (non inductive)
Microswitch MTO-ST160RM
Fixed setting switches:Contact material Silver Cadmium Oxide AgCdO101 or 2 switches, fixedContact rating:15 A @ 110/250 VAC; cos� =1 5 A @ 12 VDC (non inductive)0.25 A @ 250 VDC (non inductive)
E-LevelGauges-4s.qxd 09.10.2001 10:42 Uhr Seite 4
PRODUCT RANGE
©Messko Albert Hauser GmbH & Co KG 2000Gablonzer Straße 25-27D-61440 OberurselPhone +49 (0) 61 71/63 98-0Fax +49 (0) 61 71/63 98-98E-mail [email protected] http://www.messko.de
Mechanical pointer thermometer for transformers with microswitches
Electronic pointer thermometer for transformers
Oil level gauges for transformers
Digital indicator
Resistance Thermometer
Mechanical pointer thermometers with a remote indication0-10 mA, 0-20 mA, 4-20 mA0-1 V/DC, 0-10 V/DC and 2-10 V/DC
IN 2
20/0
1en
- 09
01/1
000
· 22
0/01
/01/
0 ·
F008
7000
· P
rint
ed i
n G
erm
any
· G
raph
ic a
rts
and
layo
ut M
R/VD
S/na
kam
i lo
unge
, m
unic
h
E-LevelGauges-4s.qxd 09.10.2001 12:53 Uhr Seite 1