Magival Valve Supplier Distributor - Global Supply Line · 2020. 9. 28. · Trunnion Ball ValVes MG...

indexTrunnion ball valves- Trunnion ball valves mg 1000

Double bloCK anD bleeD valves- Trunnion Double bloCK anD bleeD valves mg 2500

- Double bloCK anD bleeD valves mg 2000

spliT boDy ball valves- spliT boDy ball valves - full bore

- spliT boDy ball valves - reduced bore

wafer ball valves- wafer ball valves mg20

- wafer THree way ball valve mg22

monobloCK valves- monobloCK THreaDeD ball valve mg30

- monobloCK soCKeT welD ball valve mg60

- monobloCK buTT welD ball valve wiTH pre-welDeD nipples mg50

- monobloCK buTT welD ball valve wiTH inTegral nipples mg50i

- monobloCK THree way ball valve mg40

- monobloCK THree pieCes ball valve mg24

neeDle valves- neeDle valves f/f mg300

- neeDle valves m/f pressure gau ge mg350|360|370

CheCK valves mg100qualiTy anD TesT

05

09

11

15

17

21

23

27

29

31

33

35

37

41

43

45

47

Global Supply Line Australia major Magival distributor & stockist, supplying world wide. www.globalsupplyline.com.au

Contact us: [email protected]

www.globalsupplyline.com.au

mailto:[email protected]

Trunnion BallValVes

ref

1 boDy asTm a105/asTm a350 lf2 asTm a105 aisi a182 f316

17 seaT seal viTon viTon viTon

9 sTem bearing aisi a182 f316 + pTfe aisi a182 f316 + pTfe aisi a182 f316 + pTfe

25 boDy gasKeT grapHiTe grapHiTe grapHiTe

5 seaT/inserT asTm a350 lf2 + enp/Devlon aisi a182 f316/Devlon aisi a182 f316/Devlon

21 nuT asTm a194 2H asTm a194 2H asTm a194 gr.8

13 sTem-Key Carbon sTeel Carbon sTeel Carbon sTeel

29 seaT spring inConel X750 inConel X750 inConel X750

3 ball asTm a350 lf2 + enp aisi a182 f316 aisi a182 f316

19 glanD plaTe seal viTon viTon viTon

11 bearing reTainer aisi a182 f316 + pTfe aisi a182 f316 + pTfe aisi a182 f316 + pTfe

27 sTem gasKeT grapHiTe grapHiTe grapHiTe

7 bearing reTainer fe 510b uni 7070 fe 510b uni 7070 fe 510b uni 7070

23 sTem inJeCTor asTm a105 galvaniZeD asTm a105 galvaniZeD aisi a182 f316

15 lifTing-lug fe 360 fe 360 fe 360

31 nuT asTm a194 2H asTm a194 2H asTm a194 gr.8

33 pin Carbon sTeel Carbon sTeel Carbon sTeel

2 Closure asTm a105/asTm a350 lf2 asTm a105 aisi a182 f316

18 sTem seal viTon viTon viTon


26 seaT gasKeT grapHiTe grapHiTe grapHiTe

6 glanD plaTe asTm a105 asTm a105 aisi a182 f316

22 Cap sCrew 8.8 8.8 8.8

14 supporT leg fe 360 fe 360 fe 360

30 sTuD asTm a193 b7 asTm a193 b7 asTm a193 b8

4 sTem aisi 4140 + enp aisi a182 f316 aisi a182 f316

20 sTuD asTm a193 b7 asTm a193 b7 asTm a193 b


28 glanD plaTe gasKeT grapHiTe grapHiTe grapHiTe

8 aDapTer plaTe asTm a105 asTm a105 aisi a182 f316

24 Drain plug asTm a105 galvaniZeD asTm a105 galvaniZeD aisi a182 f316

16 boDy seal viTon viTon viTon

32 venT plug asTm a105 galvaniZeD asTm a105 galvaniZeD aisi a182 f316

34 gear operaTor

description material material material

- antiblowout stem- operating temperature -29°C+200°C for lf2 (-46°C+200°C)

- antistatic device- painted with our ral 7031- iso 5211 top work drilling- with lever

- rTJ and bw ends- bare stem- locking device- seat in different material- as per customer specification

Trunnion BallValVes MG 1000

ball valves “Trunnion” barstock construction in according to:

- peD 97/23/Ce - api 6D - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1

fire safe according to:- api 6fa Third edition- api 607 sixth edition- iso 10497

12

3

4

6

7

8

9

10

1112

13

15

14

16 17

18

19

2021

22

23

24

25

26

27

28

29

30

31

33

34

32

5

Full and reduced Bore

Certifications

Standard features:

Upon request:

magival valves s.r.l., via per gallarate, 50/a - 21010 - besnate (va) italy T +39 0331 27 41 09 | f +39 0331 27 45 65 | [email protected]

05

douBle BloCK and BleedValVes

antistatic device

sTanDarD feaTures

parTiCular Trunnion ball valves

opTions

vent bleeder npt thread – ½ - ¾-1

locking device

seat grease injector

stem grease sealant injector

Drain plug on all valves

bare stem

- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- rTJ ends- THD x THD- THD x flg- iso 5211 top work drilling

- locking device- lever extension- bare stem- as per customer specification


Standard features:

Upon request:

Trunnion douBle BloCK and Bleed ValVes MG 2500

09


ref

1 boDy asTm a105 asTm a350 lf2 aisi a182 f316

17 sTuD asTm a193 b7 asTm a193 b7 asTm a193 b7

9 sTem bearing aisi 316 + pTfe aisi 316 + pTfe aisi 316 + pTfe

25 glanD plaTe gasKeT grapHiTe grapHiTe grapHiTe

5 seaT/inserT aisi a182 f316/Devlon aisi a182 f316/Devlon aisi a182 f316/Devlon

21 plug asTm a105 asTm a105 asTm a105

13 boDy seal viTon viTon viTon

29 nuT Cs galvaniZeD Cs galvaniZeD Cs galvaniZeD

3 ball aisi a182 f316 aisi a182 f316 aisi a182 f316

19 CapsCrew 8.8 8.8 8.8

11 ball bearing aisi 316 + pTfe aisi 316 + pTfe aisi 316 + pTfe

27 lever Cs galvaniZeD Cs galvaniZeD Cs galvaniZeD

7 bearing reTainer fe 510b uni 7070 fe 510b uni 7070 fe 510b uni 7070

23 seaT gasKeT grapHiTe grapHiTe grapHiTe

15 sTem seal viTon viTon viTon

2 Closure asTm a105 asTm a350 lf2 aisi a182 f316

18 nuT asTm a194 2H asTm a194 2H asTm a194 2H

10 ball bearing aisi 316 + pTfe aisi 316 + pTfe aisi 316 + pTfe

26 spring inConel X718 inConel X718 inConel X718

6 glanD plaTe asTm a105 asTm a105 aisi a182 f316

22 boDy gasKeT grapHiTe grapHiTe grapHiTe

14 seaT seal viTon viTon viTon

30 pin Carbon sTeel Carbon sTeel Carbon sTeel

4 sTem aisi a182 f316 aisi a182 f316 aisi a182 f316

20 sTem inJeCTor asTm a105 asTm a105 asTm a105

12 sTem bearing aisi 316 + pTfe aisi 316 + pTfe aisi 316 + pTfe

28 sTop Cs galvaniZeD Cs galvaniZeD Cs galvaniZeD

8 aDapTer plaTe asTm a105 asTm a105 aisi a182 f316

24 sTem gasKeT grapHiTe grapHiTe grapHiTe

16 glanD plaTe seal viTon viTon viTon

description material material material

ball valves “Trunnion Double bloCK anD bleeD” bar stock construction in according to:



Certifications

12

3

4 5

6

7

8

9

10

11

12

13

14

1516

1718

19

20

21 22

23

2425

26

272829

30

ref description material material material

- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- rTJ ends- THD x THD- THD x flg- iso 5211 top work drilling

- locking device- lever extension- as per customer specification- bare stem


Standard features:

Upon request:

1 boDy asTm a105 asTm a350 lf2 aisi a182 f316

17 neeDle sTem aisi a182 f316 aisi a182 f316 aisi a182 f316

9 pressing busH asTm a105 galvaniZeD asTm a350 lf2 galvaniZeD asTm a105 galvaniZeD

5 sTop galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel

21 paCKing pTfe pTfe pTfe

13 spring C.72 galvaniZeD C.72 galvaniZeD C.72 galvaniZeD

3 ball aisi a182 f316 aisi a182 f316 aisi a182 f316

19 HeaDworK asTm a105 asTm a350 lf2 aisi a182 f316

11 o-ring viTon viTon viTon

7 seaT rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*

23 T-bar asTm a105 galvaniZeD asTm a350 lf2 galvaniZeD aisi a182 f316

15 bolTs asTm a193 b7 asTm a320 l7 asTm a193 b7

2 Closure asTm a105 asTm a350 lf2 aisi a182 f316

18 gasKeTs KlingeriTe KlingeriTe KlingeriTe


6 nuTs gr.6s galvaniZeD gr.6s galvaniZeD gr.6s galvaniZeD

22 glanD asTm a105 asTm a350 lf2 aisi a182 f316

14 sTem gasKeTs rpTfe rpTfe rpTfe

4 sTem aisi a182 f316 aisi a182 f316 aisi a182 f316

20 Cover asTm a105 asTm a350 lf2 aisi a182 f316

12 gasKeT grapHiTe grapHiTe grapHiTe

8 lever galvaniZeD sTeel galvaniZeD sTeel galvaniZeD sTeel

16 moving sTopper aisi a182 f316 aisi a182 f316 aisi a182 f316

douBle BloCK and BleedValVes MG 2000

11

1 234

5

6

78

9

1011

12

13

14

15

16

17

18

19

25

21 22

23

24 20

26

27


ball valves “Double bloCK anD bleeD”bar stock construction in according to:



Certifications

spliT BodyBall ValVes

antistatic device bare stem

sTanDarD feaTures

parTiCular Double bloCK anD bleeD valves

opTions

locking device extended stem

full bore

reduced bore

iso 5211 - Top Drilling worKextended stem and locking device

size

size

1/2”

1/2”

3/4”

3/4”

1”

1”

1. 1/4”

1. 1/4”

1. 1/2”

1. 1/2”

2”

2”

2. 1/2”

2. 1/2”

3”

3”

4”

4”

5”

5”

6”

6”

8”

8”

f 03

f 03

iso 5211

iso 5211

f 03

f 03

f 04

f 04

f 07

f 05

f 07

f 07

f 03

f 03

f 04

f 03

f 05

f 04

f 07

f 05

f 10

f 07

f 10

f 07

f 14

f 10

ref

size size

size

PN 1

6/40

ANSI

300

ANSI

900

/150

0AN

SI 1

50

ANSI

600

ANSI

250

0

description

15 15

15

1/2” 1/2”

1/2”

32 32

32

65 65

65

20 20

20

3/4” 3/4”

3/4”

1” 1”

1”

1 1/4” 1 1/4”

1 1/4”

1 1/2” 1 1/2”

1 1/2”

2” 2”

2”

2 1/2” 2 1/2”

2 1/2”

3” 3”

3”

4” 4”

4”

5” 5”

5”

6” 6”

6”

40 40

40

80 80

80

25 25

25

50 50

50

100 100

100

125 125

125

material material material

- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- painted with our ral 7031- iso 5211 top work drilling- iso 3202 face to face

- rTJ ends- special face to face dimension- seat and seal in different materials- locking device- lever extension- metal to metal valves- as per customer specification

Full Bore

Standard features:

Upon request:

1 boDy asTm a105 asTm a182 f316l asTm a350 lf2

9 pressing busH asTm a105 galvaniZeD asTm a105 galvaniZeD a350 lf2 galvaniZeD



115l 125 140 170 190120 130 150 180 325 350 140l 165 190 241 305152 178 216 282 381 403

216l 254 305229 368

108l 127 165 190 229117 140 178 203 254 267165l 216 241 330 432190 229 292 355

273l 356 384308

150a 185 285 380 460185 285 285 380 460 460150a 185 285 380 460185 285 285 380 460 gear

150a 185 285185 380

88r 107 127 177 22898 117 152 190 254 27995r 123 155 190 273117 133 165 209

133r 158 203139

95r 123 155 190 254117 133 165 209 279 317

120r 149 177130 215

75H 90 105 150 18590 100 115 160 200 22575H 90 105 150 18590 100 115 160

75H 90 13090

14D 25 38 65 9420 32 48 75 119 145 14D 25 38 65 9420 32 48 75 119 145

14D 25 3820 48

14D 25 38 65 9420 32 48 75 119 14514D 25 38 65 9420 32 48 75

14D 25 3820

75H 90 105 150 18590 100 115 160 200 22575H 90 105 150 18590 100 115 160 200 258

75H 120 105105 115

150a 185 285 380 460185 285 285 380 460 460150a 185 285 380 590185 285 285 380

150a 185 285185

3 ball asTm a182 f316l asTm a182 f316l asTm a182 f316l


7 seaTs rpTfe/Delrin* rpTfe/Delrin* rpTfe/Delrin*

15 bolTs 8.8 galvaniZeD * 8.8 galvaniZeD * asTm a320 l7

2 Closure asTm a105 asTm a182 f316l asTm a350 lf2




4 sTem asTm a182 f316l asTm a182 f316l asTm a182 f316l



ball valves “spliT boDy” barstock construction in according to:



Certifications


ØR

A

H

L

ØD

12

3

4

5

7

86

9

10

11

12

13

14

15

150 150

150

* from #150 To #600 (rpTfe)from #900 To #2500 (Derlin)

* from #300 To #2500 (a193 b7)

15


ref

size

PN 1

6/40

ANSI

150

description

151/2”

32 65203/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6” 8”

40 8025 50 100 125

material material material

- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- painted with our ral 7031- iso 5211 top work drilling- iso 3202 face to face

- rTJ ends- special face to face dimension- seat and seal in different materials- locking device- lever extension- metal to metal valves- as per customer specification

reduced Bore

Standard features:

Upon request:





120l 125 140 170 190120 130 150 180

117l 127 165 190 229117 140 178 203 254 267

150a 185 285 285 380150 185 285 285

98r 107 127 177 22898 117 152 190 254 279

90H 90 105 105 20790 100 105 120 200 220

20D1 25 40 65 10020 32 50 8014D 20 32 48 7514 25 38 48

20D1 25 40 65 10020 32 50 80 125 15014D 20 32 48 7514 25 38 48 94 94

90H 90 105 105 20790 100 105 120

150a 185 285 285 380150 185 285 285 460 590




15 bolTs 8.8 galvaniZeD * 8.8 galvaniZeD * asTm a320 l7








ball valves “spliT boDy” barstock construction in according to:



Certifications


150 200 * from #150 To #600 (rpTfe)from #900 To #2500 (Derlin)

* from #300 To #2500 (a193 b7)

size

ANSI

300

ANSI

600

151/2”

32 65203/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6”

40 8025 50 100 125

152l 165 190 241 305152 178 216 282 381 403

190l 216 241 330 432190 229 292 355 502 559

150a 185 285 285 380150 185 285 285 460 590

117r 123 155 190 273117 133 165 209 330 335

117r 123 155 190 254117 133 165 209 279 317

90H 90 105 105 20790 100 105 120 220 220

14D 20 32 48 7514 25 38 48 94 9420D1 25 40 65 10020 32 50 80 125 150

14D 20 32 48 7514 25 38 48 94 94

90H 90 105 105 20790 100 105 120 220 220

20D1 25 40 65 10020 32 50 80 125 150

150a 185 285 285 380150 185 285 285 460 590

150size

ANSI

900

/150

0AN

SI 2

500

151/2”

32 65203/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6”

40 8025 50 100 125

229l 254 305229 368

308l 356 384308 451

150a 185 285150 285

139r 158 203139 234

130r 149 177130 215

90H 90 13090 130

14D 20 3214 3820D1 25 4020 50

14D 20 3214 38

90H 90 13090 112

20D1 25 4020 50

150a 185 285150 285

150

200

590

292

342144

225

17Ø

R

A

H

L

ØD

12

3

4

5

7

86

9

10

11

12

13

14

15

ØD

1


waFer BallValVes

antistatic device bare stem

sTanDarD feaTures

parTiCular spliT boDy ball valves

opTions

locking device

extended stem

full bore

reduced bore

iso 5211 - Top Drilling worK

extended stem and locking device

gear operator

size

size

1/2”

1/2”

3/4”

3/4”

1”

1”

1. 1/4”

1. 1/4”

1. 1/2”

1. 1/2”

2”

2”

2. 1/2”

2. 1/2”

3”

3”

4”

4”

5”

5”

6”

6”

8”

f 03

f 03

iso 5211

iso 5211

f 03

f 03

f 04

f 04

f 07

f 05

f 07

f 07

f 03

f 03

f 04

f 03

f 05

f 04

f 07

f 05

f 10

f 07

f 10

f 07

f 14

8”

f 10


- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- painted with our ral 7031- iso 5211 top work drilling


Full Bore

Standard features:

Upon request:







7 seaTs rpTfe/Delrin rpTfe/Delrin rpTfe/Delrin







ball valves “wafer” barstock construction in according to:

- peD 97/23/Ce - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1


Certifications

waFer BallValVes MG 20

ØD

A

L

H

1 2

3

4

5

6

7

8

9

10

11

1213

L1

size size

PN 1

6/40

ANSI

300

ANSI

150

ANSI

600

15 151/2” 1/2”

32 3265 6520 203/4” 3/4”1” 1”1 1/4” 1 1/4”1 1/2” 1 1/2”2” 2”2 1/2” 2 1/2”3” 3”4” 4”5” 5”6” 6”

40 4080 8025 2550 50100 100125 125

35l 46 66 98 14043 55 73 120 177 210 35l 46 66 98 14043 55 73 120 177 210

35l 46 66 98 14043 55 73 120 177 210150a 185 285185 285 285

150a 185 285 380 460185 285 285 380 460 46014D 25 38 65 9420 32 48 75 118 144

150a 185 285 380 460185 285 285 380 460 460

150a 185 285 380 460185 285 285 380 460 46035l1 46 66 107 15243 55 80 120 177 240 35l1 46 66 107 15243 55 80 120 177 240

35l1 46 66 107 15243 55 80 120 177 24014D 25 3820 32 48

14D 25 38 65 9420 32 48 75 118 14440l 53 7343 55 80

14D 25 38 65 9420 32 48 75 118 144

150 150

21


- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- painted with our ral 7031- iso 5211 top work drilling- Three way ball valve “l”


Full Bore

Standard features:

Upon request:

ball valves “wafer THree way” bar stock construction in according to:

- peD 97/23/Ce - api 598- asme 16.34 iso 14313- ansi b 16.10 – en 558-1- ansi b 16.5 en 1092-1


Certifications

waFer BallValVes MG 22

WAFER THREE WAY

A

ØD

L

L1

H

V








7 seaTs rpTfe/Delrin rpTfe/Delrin rpTfe/Delrin*







size size

PN 1

6/40

800

PSI

ANSI

150

20 2040 401/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”5” 5”4” 4”6” 6”

25 2550 5015 1532 3265 6580 80125 125

35l 46 66 98 14043 55 73 120 177 210 35l 46 66 98 14043 55 73 120 177 210

35l 46 66 98 14043 55 73 120 177 21085v 90 120 150 18590 105 130 175 85v 90 120 150 18590 105 130 175

95v 90 120 150 18590 105 130 175

150a 185 285 380 460185 285 285 381 460 460 150a 185 285 380 460185 285 285 380 460 460

150a 185 285 380 460185 285 285 380 460 460

35l1 46 66 107 15243 55 80 120 177 240 35l1 46 66 107 15243 55 80 120 177 240

35l1 46 66 107 15243 55 80 120 177 240

14D 25 38 65 9420 32 48 75 118 144 14D 25 38 65 9420 32 48 75 118 144

14D 25 38 65 9420 32 48 75 118 144

100 100150 150

23


MonoBloCKValVes

antistatic device

sTanDarD feaTures

parTiCular wafer ball valves

opTions



size 1/2” 3/4” 1” 1. 1/4” 1. 1/2” 2” 2. 1/2” 3” 4” 5” 6”

f 03iso 5211 f 03 f 05 f 05 f 07f 03 f 03 f 05 f 07 f 10 f 10

bare stem

iso 5211 - Top Drilling worK


- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- bsp female or npT female

- bsp or npT male/male ends- bsp or npT male/female ends- locking device- lever extension- iso 5211 top work drilling- as per customer specification


Standard features:

Upon request:














ball valves “monobloCK” bar stock construction in according to:

- peD 97/23/Ce


Certifications

MonoBloCKValVes MG 30

THREADED BALL VALVE

size size

800

PSI

3000

PSI

1500

PSI

6000

PSI

8 81/4” 1/4”

20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”

25 2550 5015 1532 3265 6580 80

65l 75 100 125 16065 90 115 150 200 225 65l 75 100 125 16065 90 115 150 200

65l 75 100 125 16065 90 115 150 200 225 65l 75 100 12565 90 115 150

150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285 380150 185 285 285 380

150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285150 185 285 380

11D 14 25 38 6511 20 32 48 75 94 11D 14 25 38 6511 20 32 48 75

11D 14 25 38 6511 20 32 48 75 94 11D 14 25 3811 20 32 48

62H 70 90 100 16062 80 95 105 203 227 62H 70 90 100 16062 80 95 105 203

62H 70 90 100 16062 80 95 105 203 227 62H 70 90 10062 80 95 105

100 100

* from 1500 To 6000 (Delrin)

full bore

reDuCeD bore

A

H

L

ØD

1 2

3

4

5

6

7

8

9

10

11

12

13

27

size size

800

PSI

3000

PSI

1500

PSI

6000

PSI

8 81/4” 1/4”

20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”

25 2550 5015 1532 3265 6580 80

65l 65 90 115 15065 75 100 125 160 200 65l 65 90 115 16065 75 100 125 160

65l 65 90 115 15065 75 100 125 160 200 65l 65 90 11565 75 100 125

150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285 380150 185 285 285 380

150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285150 185 285 285

11D 11 20 32 4811 14 25 38 65 75 11D 11 20 32 4811 14 25 38 65

11D 11 20 32 4811 14 25 38 65 75 11D 11 20 3211 14 25 38

62H 62 80 95 10562 70 90 100 160 203 62H 62 80 95 10562 70 90 100 160

62H 62 80 95 10562 70 90 100 160 203 62H 62 80 9562 70 90 100

100 100



- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- nipples 100mm

- sw sHorT paTTern- sw x THD female ends- sw x THD male ends- locking device- lever extension- iso 5211 top work drilling- as per customer specification


Standard features:

Upon request:














ball valves “monobloCK” barstock construction in according to:

- peD 97/23/Ce


Certifications

SOCKET WELD BALL VALVE


size size

800

PSI

3000

PSI

1500

PSI

6000

PSI

8 81/4” 1/4”

20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”

25 2550 5015 1532 3265 6580 80

237l 241 264 281 305237 253 271 300 315 348 237l 241 264 281 305237 253 271 300 315

237l 241 264 281 305237 253 271 300 315 348 237l 241 264 281237 253 271 300

150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285 380150 185 285 285 380

150a 150 185 285 380150 185 285 285 380 460 150a 150 185 285150 185 285 285

11D 14 25 38 6511 20 32 48 75 94 11D 14 25 38 6511 20 32 48 75

11D 14 25 38 6511 20 32 48 75 94 11D 14 25 3811 20 32 48

62H 70 90 100 16062 80 95 105 203 227 62H 70 90 100 16062 80 95 105 203

62H 70 90 100 16062 80 95 105 203 227 62H 70 90 10062 80 95 105

100 100A

H

L

ØD

1 2

3

4

5

6

7

8

9

10

11

12

13

100 100


size size

800

PSI

3000

PSI

1500

PSI

6000

PSI

8 81/4” 1/4”

20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”

25 2550 5015 1532 3265 6580 80

237l 237 253 271 300237 241 264 281 305 315

237l 237 253 271 300237 241 264 281 305 315

237l 237 253 271 300237 241 264 281 305

237l 237 253 271237 241 264 281

150a 150 185 285 285150 150 185 285 380 380

150a 150 185 285 285150 150 185 285 380 380

150a 150 185 285 285150 150 185 285 380

150a 150 185 285150 150 185 285

11D 11 20 32 4811 14 25 38 65 75

11D 11 20 32 4811 14 25 38 65 75

11D 11 20 32 4811 14 25 38 65

11D 11 20 3211 14 25 38

62H 62 85 95 10562 70 90 100 160 203

62H 62 85 95 10562 70 90 100 160 203

62H 62 85 95 10562 70 90 100 160

62H 62 85 9562 70 90 100

100 100

full bore

reDuCeD bore

29



- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- schedule 80 nipples (100mm)

- bw x THD female ends- bw x THD male ends- locking device- lever extension- schedule 160 or XXs nipples- iso 5211 top work drilling- as per customer specification


Standard features:

Upon request:















- peD 97/23/Ce


Certifications

BUTT WELD BALL VALVE WITH PRE-WELDED NIPPLES


A

H

L

ØD

1 2

3

4

5

6

7

8

9

10

11

12

13

100100

size size

800

PSI

3000

PSI

1500

PSI

6000

PSI

8 81/4” 1/4”

20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”

25 2550 5015 1532 3265 6580 80

265l 275 300 325 360265 290 315 350 400 425

265l 275 300 325 360265 290 315 350 400 425

265l 275 300 325 360265 290 315 350 400

265l 275 300 325265 290 315 350

150a 150 185 285 380150 185 285 285 380 460

150a 150 185 285 380150 185 285 285 380 460

150a 150 185 285 380150 185 285 285 380

150a 150 185 285150 185 285 285

11D 14 25 38 6511 20 32 48 75 94

11D 14 25 38 6511 20 32 48 75 94

11D 14 25 38 6511 20 32 48 75

11D 14 25 3811 20 32 48

62H 70 90 100 16062 80 95 105 203 227

62H 70 90 100 16062 80 95 105 203 227

62H 70 90 100 16062 80 95 105 203

62H 70 90 10062 80 95 105

100 100

31


size size

800

PSI

3000

PSI

1500

PSI

6000

PSI

8 81/4” 1/4”

20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”

25 2550 5015 1532 3265 6580 80

265l 275 300 325 360265 290 315 350 400 425

265l 275 300 325 360265 290 315 350 400 425

265l 275 300 325 360265 290 315 350 400

265l 275 300 325265 290 315 350

150a 150 185 285 380150 185 285 285 380 460

150a 150 185 285 380150 185 285 285 380 460

150a 150 185 285 380150 185 285 285 380

150a 150 185 285150 185 285 285

11D 14 25 38 6511 20 32 48 75 94

11D 14 25 38 6511 20 32 48 75 94

11D 14 25 38 6511 20 32 48 75

11D 14 25 3811 20 32 48

62H 70 90 100 16062 80 95 105 203 227

62H 70 90 100 16062 80 95 105 203 227

62H 70 90 100 16062 80 95 105 203

62H 70 90 10062 80 95 105

100 100

full bore

reDuCeD bore



- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- schedule 80 nipples (100mm)

- bw x THD female ends- bw x THD male ends- locking device- lever extension- schedule 160 or XXs nipples- iso 5211 top work drilling- as per customer specification


Standard features:

Upon request:















- peD 97/23/Ce


Certifications

BUTT WELD BALL VALVE WITH INTEGRAL NIPPLES


A

H

L

ØD

1 2

3

4

5

6

7

8

9

10

11

12

13

100 100

30 30

size size

800

PSI

3000

PSI

1500

PSI

6000

PSI

8 81/4” 1/4”

20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”

25 2550 5015 1532 3265 6580 80

237l 241 264 281 305237 253 271 300 315 348

237l 241 264 281 305237 253 271 300 315 348

237l 241 264 281 305237 253 271 300 315

237l 241 264 281237 253 271 300

150a 150 185 285 380150 185 285 285 380 460

150a 150 185 285 380150 185 285 285 380 460

150a 150 185 285 380150 185 285 285 380

150a 150 185 285150 185 285 285

11D 14 25 38 6511 20 32 48 75 95

11D 14 25 38 6511 20 32 48 75 95

11D 14 25 38 6511 20 32 48 75

11D 14 25 3811 20 32 48

62H 70 90 100 16062 80 95 105 203 227

62H 70 90 100 16062 80 95 105 203 227

62H 70 90 100 16062 80 95 105 203

62H 70 90 10062 80 95 105

100 100

33

MonoBloCKValVes MG 50i

size size

800

PSI

3000

PSI

1500

PSI

6000

PSI

8 81/4” 1/4”

20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”2.1/2” 2.1/2”3” 3”4” 4”

25 2550 5015 1532 3265 6580 80

237l 237 253 271 300237 241 264 281 305 315 237l 237 253 271 300237 241 264 281 305

237l 237 253 271237 241 264 281237l 237 253 271 300237 241 264 281 305 315

150a 150 185 285 285150 150 185 285 380 380 150a 150 185 285 285150 150 185 285 380

150a 150 185 285150 150 185 285150a 150 185 285 285150 150 185 285 380 380

11D 11 20 32 4811 14 25 38 65 75 11D 11 20 32 4811 14 25 38 65

11D 11 20 3211 14 25 3811D 11 20 32 4811 14 25 38 65 75

62H 62 85 95 10562 70 90 100 160 203 62H 62 85 95 10562 70 90 100 160

100 100

full bore

reDuCeD bore



- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized- iso 5211 top work drilling- Three way ball valve “l”

- locking device- lever extension- reduced bore- Three way ball valve “T”- as per customer specification

Full Bore

Standard features:

Upon request:














ball valves “THree way” bar stock construction in according to:

- peD 97/23/Ce


Certifications

THREE WAY BALL VALVE


12 3

4

5

6

7

89

10

11

1213

A

H

L

E

ØD

B

size

PN 1

6/40

ANSI

150

20 401/2” 3/4” 1” 1,1/4” 1.1/2” 2” 2.1/2”

25 50 6515 32

75l 90 120 15575 102 135

75l 90 120 15575 102 135

63H 85 95 10563 90 100

63H 85 95 10563 90 100

22,5e 30 40 5022,5 35 45

22,5e 30 40 5022,5 35 45

11D 14 25 3811 20 32

11D 14 25 3811 20 32

150a 150 185 285150 185 285

150a 150 185 285150 185 285

37,5b 45 60 77,537,5 51 67,5

37,5b 45 60 77,537,5 51 67,5

size

ANSI

300

20 401/2” 3/4” 1” 1,1/4” 1.1/2” 2” 2.1/2”

25 50 6515 32

75l 90 120 15575 102 135

63H 85 95 10563 90 100

22,5e 30 40 5022,5 35 4511D 14 25 3811 20 32

150a 150 185 285150 185 285

37,5b 45 60 77,537,5 51 67,5

35




- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- antistatic device- Cs galvanized

- Threaded- with nipples- locking device- lever extension- reduced bore- as per customer specification

Full Bore

Standard features:

Upon request:












14 sCrews 8.8 galvaniZeD 8.8 galvaniZeD 8.8 galvaniZeD



ball valves “THree pieCes” bar stock construction in according to:

- peD 97/23/Ce


Certifications


A

H

L

ØD

1 2

3

4

5

6

7

8

9

10

11

12

13

14

size

800

PSI

1500

PSI

20 40103/8” 1/2” 3/4” 1” 1,1/4” 1.1/2” 2” 2.1/2” 3” 4”

25 5015 32 65 80

l

l

a 150 185 285 380185 285 285 380 460

150 185 285 380185 285 285 380 460a

D

D

H

75 100 125 16075 90 115 150 200 225

15014 25 38 6511 20 32 48 75 94

70 90 100 16065 85 95 105 203 22775 100 125 16075 90 115 150 200 225

15014 25 38 6511 20 32 48 75 94

70 90 100 16065 85 95 105 203 227H

100size

3000

PSI

6000

PSI

20 40103/8” 1/2” 3/4” 1” 1,1/4” 1.1/2” 2” 2.1/2” 3” 4”

25 5015 32 65 80

l

l

a

150 185 285 380185 285 285 380 460

150 185 285 380185 285 285 380 460

a

D

D

H

75 100 125 16075 90 115 150 200 225

15014 25 38 6511 20 32 48 75 94

70 90 100 16065 85 95 105 203 22775 100 125 16075 90 115 150 200 225

15014 25 38 6511 20 32 48 75 94

70 90 100 16065 85 95 105 203 227H

100

37

THree pieCes BallValVes MG 24


needleValVes

antistatic device

sTanDarD feaTures

parTiCular monobloCK valves

opTions




- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- gas or npT- Cs galvanized

- flange needle valves- needle valve a 90°- sw- npTxgas

DifferenT HanDwHeel- T-bar- bachelite

Standard features:

Upon request:


9 HanDwHeel formeD sTeel formeD sTeel formeD sTeel

5 HeaDworK asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2


7 paCKing pTfe* pTfe* pTfe*

2 moving sTopper asTm a182 f316l asTm a182 f316l asTm a182 f316l

6 Cover asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2

4 gasKeT KlingeriTe KlingeriTe KlingeriTe

8 glanD asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2

needle valves bar stock constructionin according to:

- peD 97/23/Ce- aTeX

Certifications

* for 6000 psi (grapHoil)

ØG

E

H1

H2

L

ØF

1

2

3

4

5

6

7

8

9

size size

3000

PSI

6000

PSI

8 81/4” 1/4”

20 2040 4010 103/8” 3/8”1/2” 1/2”3/4” 3/4”1” 1”1,1/4” 1,1/4”1.1/2” 1.1/2”2” 2”

25 2550 5015 1532 32

30e 30 40 6030 35 50 70 30e 35 50 7030 40 60 70

115H1 115 136 175115 118 165 185 115H1 118 165 185115 136 175 185

60l 60 75 10060 70 90 120 60l 70 90 12060 75 100 1205f 6 9 166 7,5 11,5 19 5f 6 9 166 7,5 11,5 19

127H2 127 147 187127 129 177 197 127H2 129 177 197127 147 187 197

70g 70 80 12570 70 125 125 70g 70 125 12570 80 125 125

41

needleValVes MG 300


- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- gas or npT- Cs galvanized- pressure gauge (mg350)- pressure gauge wiTH Drain (mg360)- pressure gauge wiTH Drain anD ConTrol flange (mg370)

DifferenT HanDwHeel- T-bar- baCHeliTe

Standard features:

350 360370 Upon request:

needle valves “pressure gauge” bar stock constructionin according to:

- peD 97/23/Ce- aTeX

Certifications

PRESSURE GAUGE VALVE

needle ValVesMG 350 360 370

* for 6000 psi (grapHoil)

ØG

E

H1

L

ØF

1

2

3

6

5

9

H2

4

8

7



9 HanDwHeel formeD sTeel formeD sTeel formeD sTeel

5 HeaDworK asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2


7 paCKing pTfe* pTfe* pTfe*

2 moving sTopper asTm a182 f316l asTm a182 f316l asTm a182 f316l

6 Cover asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2

4 gasKeT KlingeriTe KlingeriTe KlingeriTe

8 glanD asTm a105 galvaniZeD aisi a182 f316 asTm a350 lf2

size

3000

PSI

6000

PSIM

G350

/MG3

60

81/4”

103/8” 1/2”

15

30e 3030

30e 3030

115H1 115115

115H1 115115

60l 6060

70l 7070

3,5f 44

3,5f 44

127H2 127127

127H2 127127

70g 7070

70g 7070

size

MG3

7030

00 P

SI60

00 P

SI

81/4”

103/8” 1/2”

15

30e 3030

30e 3030

115H1 115115

115H1 115115

30p 3030

40p 4040

60l 6060

60l 6060

3,5f 44

3,5f 44

127H2 127127

127H2 127127

3,5m 44

40m 4040

70g 7070

70g 7070

E

H1

ØG

L

1

ØF

3

2

5

6

9

H2

4

8

7

E

H1

ØG

L

1

ØF

3

2

5

6

9

H2

4

8

7

ØM

P

43



- antiblowout stem- operating temperature -29°C+200°C - for lf2 (-46°C+200°C)- Cs galvanized- gas or npT

- sw

Full Bore

Standard features:

Upon request:

1 boDy asTm a105 galvaniZeD asTm a182 f316l asTm a105 galvaniZeD

5 gasKeT pTfe/Delrin* pTfe/Delrin* pTfe/Delrin*

3 ring nuT asTm a105 asTm a182 f316l asTm a350 lf2


4 spring aisi 316 aisi 316 aisi 316

Check valves bar stock constructionin according to:

- peD 97/23/Ce - aTeX

Certifications


size

3000

PSI

3000

PSI

3000

PSI

81/4”

20 40103/8” 1/2” 3/4” 1” 1,1/4” 1.1/2” 2”

25 5015 32

75a 65 80 9575 75 90 110

75a 65 80 9575 75 90 110

75a 65 80 9575 75 90 110

40l 40 50 7040 40 60 80

40l 40 50 7040 40 60 80

40l 40 50 7040 40 60 80

1

2

3

4

5

L

ØA

45

CHeCK ValVesMG 100


qualiTy TesT

To achieve this objective magival valves has implemented and maintains an updated Quality management system in accordance with iso 9001:2008 and api Q1.magival valves ensures that the quality policy is understood, implemented and maintained at all levels; the quality program is focused on continual improvement and it’s continually subjected to review and audit by internal personal, external agency inspectors and the most important worldwide engineering companies.

magival valves products fulfill all the main international standards (ex. iso, api, asme, ansi, asTm, naCe, bs etc.)we obtained the following products certificates and new ones are in progress.

100% ball valves are tested:

• Hydrostatic body test• Hydrostatic seat test• pneumatic body test• visual and dimensional test• functional and operability test

upon request also the following test:

• fugitive emission Test• gas test• non-destructive Test

47

magival valves s.r.l. is an italian longlasting ball valves manufacturer with a well equipped production unit that satisfies most of the engineering requirements of oil & gas, petrochemical and water world.european forged materials (lf2 - f316 – f53 – f55 – inConel 625…), speedy deliveries (one week for split body valves), competitive prices, multinational flexible work force and quality management keep magival valves an ethical and reliable partner.mr. possamai and his daughter federica invite you to join the evolution path that started in 1978.

hi..'-. -- --

MAGIVAL VALVES

Magival valves S.r.l. , via per Gallarate, 50/b - 21010 Besnate (YA) Italy I T +39 0331 27 41 09 I F +39 0331 27 45 65

[email protected] t I comme rcial e@magi val. it I www.magival.it

Global Supply Line Australia major Magival distributor & stockist, supplying world wide. www.globalsupplyline.com.au

Contact us: [email protected]

www.globalsupplyline.com.au

mailto:[email protected]

Magival Valve Supplier Distributor - Global Supply Line · 2020. 9. 28. · Trunnion Ball ValVes MG...

Documents

Transcript of Magival Valve Supplier Distributor - Global Supply Line · 2020. 9. 28. · Trunnion Ball ValVes MG...