MAG 44 ACCESSORIES A - Ilanga Lightingstreetlighting.co.za/wp-content/uploads/Ilanga-Mag-44.pdf ·...
2
ILANGA LIGHTING DISTRIBUTION COMPANY (PTY) Ltd. Reg. No. 2003/030689/07 Lighting Lighting Lighting Lighting ILANGA LIGHTING DISTRIBUTION COMPANY (PTY) Ltd. Reg. No. 2003/030689/07 24 Julbert Road, Benrose, Johannesburg P.O. Box 34218, Jeppestown, 2043 Tel: 011 614 4327 Fax: 011 614 5920 e-mail: [email protected] MAG 44 MAG 44 M A G 4 4 ACCESSORIES KEYRING EYEBOLT ANTI-VIBRATION BRACKET FLAT GLASS LENS CROSS ARM 15° WALL MOUNT POLE MOUNT SPIGOTS ALUMINIUM BULKHEAD WITH BOROSILICATE GLASS LENS MAG 44 ORDERING DATA
Transcript of MAG 44 ACCESSORIES A - Ilanga Lightingstreetlighting.co.za/wp-content/uploads/Ilanga-Mag-44.pdf ·...
ILANGA LIGHTING DISTRIBUTION
COMPANY (PTY) Ltd.Reg. No. 2003/030689/07
L i g h t i n gL i g h t i n g
L i g h t i n gL i g h t i n g
ILANGA LIGHTING DISTRIBUTION
COMPANY (PTY) Ltd.Reg. No. 2003/030689/07
24 Julbert Road, Benrose,
Johannesburg
P.O. Box 34218, Jeppestown, 2043
Tel: 011 614 4327
Fax: 011 614 5920
e-mail: [email protected]
MAG 44 MAG 44 MAG44
ACCESSORIES
KEYRING EYEBOLT ANTI-VIBRATION BRACKET FLAT GLASS LENS
CROSS ARM15° WALL MOUNTPOLE MOUNT SPIGOTS
ALUMINIUM BULKHEAD WITH BOROSILICATE GLASS LENS
MAG 44 ORDERING DATA
L i g h t i n gL i g h t i n g
ILANGA LIGHTING DISTRIBUTION
COMPANY (PTY) Ltd.Reg. No. 2003/030689/07
24 Julbert Road, Benrose,
Johannesburg
P.O. Box 34218, Jeppestown, 2043
Tel: 011 614 4327
Fax: 011 614 5920
e-mail: [email protected]
L i g h t i n gL i g h t i n g
ILANGA LIGHTING DISTRIBUTION
COMPANY (PTY) Ltd.Reg. No. 2003/030689/07
24 Julbert Road, Benrose,
Johannesburg
P.O. Box 34218, Jeppestown, 2043
Tel: 011 614 4327
Fax: 011 614 5920
e-mail: [email protected]
TECHNICAL DATA DIMENSION LINE DRAWINGSMAG 44
MAG 44
MAG 44MAG44
FEATURES
PHOTOMETRIC DATA
• Aluminium ring locked on flange
• Dust and moisture proof
• High pressure die cast aluminium
LM6
• High Thermal shock resistant
Borosilicate glass diffuser can withstand
highpressure hosedown
• Stainless steel
• locking screws for sealing on an aluminium
ring locked on flange.
• SABS Approved
• High temperature SABS
approved
• 20mm
• see options and accessories
• SABS approved high
power factor
• IP 66 rating
• Silicon closed cell gaskets for
durability and heat resistance
BODY :
DIFFUSER :
RETAINING SCREWS :
LAMPHOLDER :
WIRING :
CONDUIT ENTRY :
FIXING :
CONTROL GEAR :
RATING :
GASKET :
APPLICATIONS
• INDUSTRIAL LIGHTING
• OUTDOOR LIGHTING
• DUSTY & DIRTY ENVIRONMENT
• SECURITY LIGHTING
• CONVEYOR LIGHTING
• INDUSTRIAL PLANT LIGHTING
• TUNNEL LIGHTING
• EMERGENCY LIGHTING
• ZONE 21, 22 AND ZONE 2
STANDARDS
• SANS 475
• IEC 60598/1-2-3
• SANS / IEC 61421-1 (ZONE 21 /22)
• SANS / IEC 60079-2 (ZONE 2)
OPTIONS AND ACCESSORIES• Eyebolt mount
• Pole mounting
• Anti vibration mounting
• Wall bracket 15º
• LED
• Emergency
