Maeda Mini Cranesugb.lt/sandeliukas/uploads/2016/11/67135-Kranlyft... · 2016. 11. 22. · Maeda...
Transcript of Maeda Mini Cranesugb.lt/sandeliukas/uploads/2016/11/67135-Kranlyft... · 2016. 11. 22. · Maeda...
-
2
Maeda Mini Cranes
MC104Page 4
MC174Page 6
MC285Page 8
MC305-2Page 10
Time and time again these innovative machines are proving their worth. From panelling and cladding, through the full spectrum of glass handling to restoration projects, specialist lifting applications or in restricted areas on domestic and construction sites. Their compact dimensions and ability to manoeuvre mean that in many lift situations they replace the need for much larger cranes.
The smaller MC cranes get in to places you wouldn’t have dreamt possible. Most are slender enough to fit through a standard doorway and house enough power to complete heavy lifts once in place. The larger LC models are still very compact yet boast much higher lifting capacities and heights while retaining excellent manoeuvrability and flexibility.
Maeda have been producing these mini cranes in Japan since 1980 and are market leaders in their territory with over 70% market share. In Europe the cranes are providing fantastic results and are quickly becoming recognized as the “must have” new product for both hire companies and construction companies alike. New uses for these products are being found almost daily and in all applications end users are seeing both time and cost saving benefits. Whatever your industry, Maeda mini cranes will both meet and exceed your needs.
Maeda mini cranes are also highly environmentally friendly as they feature an electric option in combination with an energy saving system. This is now a standard feature on the newer machines and one which will continue into all new Maeda products.
We hope that you find this brochure useful and informative but should you require any further information about any of the products detailed here, please contact your local authorised Maeda distributor using the contact information given at the rear of this brochure.
h higherbility.
marovidi
odu
aders ntastic
both h
gty.
ardi
uct for bnta
der
gher
ntab
ade
ty.ghergher
ty.
arket leaderding fanta
uct for b ec
hirerebeing founde products ar
me and cost saving benefits.exceed your nee
elec thn thfeeatnow
y
atutan
eda products.
new product for both hire ese products are being found time and cost saving benefits.
nd e
as is n
Maeda producd d
and cost saving benefitceed your needs.
ctricure an elehey feature ondard feeow a st the
67135 Kranlyft English Brochure.indd 2 30/3/09 14:43:53
-
... consider the possibilities
3
MC405Page 12
LC785Page 14
LC1385Page 16
67135 Kranlyft English Brochure.indd 3 30/3/09 14:43:57
-
4
MC104 CER Mini Crane
Features at a glance...
The MC104 is the baby of the Maeda mini cranes yet still has a fantastic lifting capacity throughout its range. Its slim body is able to fit through a standard doorway allowing access to areas previously inaccessible to standard cranes. The MC104 is powered by an electric motor which operates from any standard 3 phase electric source.
Features at a g
0.995 Ton Max capacity• 5.5m Max Working Height• Slim Body (600mm) • Electric Motor• Low Ground Pressure • Manoeuvrability & Stability • Hydrostatic Transmission • Rubber Tracks • Remote Control• 2 Year Warranty •
TravellingStonework
4Glazing Restricted Access Rooftop Lift
More Images...
67135 Kranlyft English Brochure.indd 4 30/3/09 14:44:38
-
... consider the possibilities
5
Dimensions
SpecificationsCapacity Maximum 0.995t x 1.1m
Working Radius Maximum 5.1m x 200kg
Lifting Height Maximum 5.5m x 650kg
Dimensions MC104CER 2160mm x 600mm x 1305mm
Weight MC104CER 1050kg
Hook Speed Maximum 3.2m / min. (4 falls, 3rd layer)
Single Line Speed Maximum 12.8m / min. (3rd layer)
Hoist Rope Type IWRC 6 x Fi (29) Ø 6mm x 39m
Telescopic System Boom lengthTelescoping speed
Boom type
1.85m - 5.30m3.45m / 20sec.Fully automatic 4 section pentagonal telescopic boom
Boom Hoist System Hoist angle / speed 0º - 75º / 11 sec.
Slew System Slew angle / speed 360º continuous / 1.3 rpm
Outrigger System Type 4 Multi position box type. Hydraulic cylinders with lock valves.
Traction System DriveTravel speed
GradabilityGround length x width
Ground pressure
Hydrostatic type, stepless forward and reverse0 - 1.9 km/h20º1044mm x 180mm (Track dimensions)0.29 kgf / cm²
Motor Electric Motor 5.5kw, 4P, 380vTotally enclosed fan-cooled type.
Standard Equipment Working light, hour-meter, 4-fall hook block, black rubber tracks, cable remote control, overwind protection.
Optional Equipment White rubber tracks, single fall hook, two fall hook, radio remote control.
Total rated load Outriggers at Maximum position1.85m boom 3.00m boom 4.15m boom 5.30m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 1.1 995 < 1.1 995 < 1.8 820 < 2.4 650
1.3 980 1.3 980 2.0 750 2.5 620
1.5 890 1.5 890 2.5 620 2.8 550
1.65 790 2.0 750 2.8 550 3.0 500
2.5 620 3.0 500 3.5 380
2.8 550 3.5 380 4.0 300
3.95 300 4.5 250
5.1 200
Maximum Reach Below Ground LevelFour Fall Two Fall Single Fall
8m 16m 32m
Working Range Diagram
The Working Range Chart does not take into account boom deflection under load.
Total rated load Outriggers at any other position1.85m boom 3.00m boom 4.15m boom 5.30m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 1.1 735 < 1.1 735 < 1.8 435 < 2.4 295
1.3 620 1.3 620 2.0 405 2.5 280
1.5 540 1.5 540 2.5 280 2.8 210
1.65 490 2.0 405 2.8 210 3.0 185
2.5 280 3.0 185 3.5 140
2.8 210 3.5 140 4.0 100
3.95 110 4.5 75
5.1 60
180mm
2160mm
1044mm
600mm
1305mm
1345mm
3400
mm
Max
(248
5mm
Min
)
3300mm Max (1985mm Min)
2785mm Max (1710mm Min)
60° 60°
45°45°
1.55m 2.80m 3.95m 5.10m
(5.5m)
Working radius (m)
Lifti
ng h
eigh
t (m
)
Diagram shows outriggers at maximum position
67135 Kranlyft English Brochure.indd 5 30/3/09 14:44:41
-
6
MC174 CRM Mini Crane
Features at a glance...
The Maeda MC174 sets the standard that other mini cranes try to achieve. Its super slim width of 590mm coupled with its 1.72 ton lifting capacity make it absolutely unparalleled. This fantastic machine also retains all of the other benefits of the machines in the Maeda range including a 2 year warranty, remote control and unrivalled build quality and usability.
1.72 Ton Max capacity• 5.5m Max Working Height • Super Slim Body Width (590mm)• Low Ground Pressure • Manoeuvrability & Stability • Programmable Moment Limiter • Hydrostatic Transmission • Tilt Sensor/Alarm • Rubber Tracks • High Speed Winch • 2 Travel Speeds • Remote Control• 2 Year Warranty •
More Images...
67135 Kranlyft English Brochure.indd 6 30/3/09 14:44:50
-
... consider the possibilities
7
SpecificationsCapacity Maximum 1.72t x 1m
Working Radius Maximum 5.17m x 220kg
Lifting Height Maximum 5.5m x 770kg
Dimensions MC174 CRM 2000mm x 590mm x 1300mm
Weight MC174 CRM 1290kg
Hook Speed Maximum 10.9m / min. (4 falls, 3rd layer)
Hoist Rope Type IWRC 6 x Fi (29) Ø 6mm x 35m
Telescopic System Boom lengthTelescoping speed
Boom type
1.83m - 5.45m3.62m / 15 sec.Fully automatic 4 section pentagonal telescopic boom
Boom Hoist System Hoist angle / speed 3º - 77º / 12 sec.
Slew System Slew angle / speed 360º continuous / 2.0 rpm
Outrigger System Type
Maximum extended dimensions
4 Multi position box type. Hydraulic cylinders with lock valves(Length) 3335mm x (Front) 3060mm x (Rear) 2885mm
Traction System DriveTravel speed
GradabilityGround length x width
Ground pressure
Hydrostatic type, stepless forward and reverse0 - 3.3km/h20º1044mm x 180mm (Track dimensions)0.34 kgf / cm²
Engine ModelType
Rated outputStarting method
Fuel tank capacity
Mitsubishi GM401LE1 Cylinder, Air Cooled, Petrol6.6kw / 1800 rpmElectric Petrol / 6L
Standard Equipment Cable remote control, overwind protection, hydraulic safety valves, working light, hour-meter, 4-fall hook block, black rubber tracks, moment limiter, EMO switch, level and working status lamp.
Optional Equipment White rubber tracks, single fall hook, two fall hook, searcher hook and radio remote control, LPG option.
Total rated load Outriggers at Maximum position1.83m boom 2.97m boom 4.21m boom 5.45m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
-
8
Features at a glance...
MC285 CRM(E) Mini Crane
The MC285 boxes way above its weight with a massive 2.82 ton lifting capacity while measuring just 750mm wide when stowed. Its slim body is able to fit through most doorways allowing access to areas previously inaccessible to standard cranes. The MC285 has proven to be one of the most popular models of mini crane and is used in many varied applications.
Features at a glan
2.82 Ton Max capacity• 8.7m Max Working Height• Slim Body Width (750mm) • Low Ground Pressure • Manoeuvrability & Stability • Programmable Moment Limiter • Hydrostatic Transmission • Tilt Sensor/Alarm • Rubber Tracks • Hydraulic Disc Brake • Remote Control• 2 Year Warranty •
Maintenance WorkRestricted Access
88Glazing Railway Maintenance General Lifting
More Images...
67135 Kranlyft English Brochure.indd 8 30/3/09 14:45:33
-
... consider the possibilities
9
Dimensions
SpecificationsCapacity Maximum 2.82 t x 1.4m
Working Radius Maximum 8.205m x 150kg
Lifting Height Maximum 8.7m x 550kg
Dimensions MC285 CRMMC285 CRME
2715mm x 750mm x 1440mm3285mm x 750mm x 1440mm
Weight MC285 CRMMC285 CRME
1770kg1950kg
Hook Speed Maximum 8m / min. (4 falls, 3rd layer)
Single Line Speed Maximum 32m / min. (3rd layer)
Hoist Rope Type IWRC 6 x Fi (29) Ø 7mm x 48m
Telescopic System Boom lengthTelescoping speed
Boom type
2.535m - 8.575m6.04m / 22 sec.Fully automatic 5 section pentagonal telescopic boom
Boom Hoist System Hoist angle / speed 0º - 80º / 14 sec.
Slew System Slew angle / speed 360º continuous / 1.0 rpm
Outrigger System Type
Maximum extended dimensions
4 Multi position box type. Hydraulic cylinders with lock valves.(Length) 4580mm x (Front) 4530mm x (Rear) 3810mm
Traction System DriveTravel speed
GradabilityGround length x width
Ground pressure
Hydrostatic type, stepless forward and reverse0 - 2.2 km/h20º975mm x 200mm (Track dimensions)0.45 kgf / cm² (0.50 kgf / cm² CRME)
Engine ModelType
Rated outputStarting method
Fuel tank capacity
Yanmar 2TNE68-MB2 cylinder water cooled diesel 6.57 Kw / 2600 rpmElectric Diesel / 12L
Electric Motor(Optional)
TypeSize
Fully enclosed fan cooled motor 5.5 Kw 4P 380V
Standard Equipment Working light, hour-meter, 4-fall hook block, black rubber tracks, moment limiter, hydraulic safety valves, level, wire rope latch, machine body inclination alarm, EMO switch, working status lamp, overwind protection and cable remote control.
Optional Equipment White rubber tracks, single fall hook, two fall hook, searcher hook and radio remote control.
975mm
1480mm
4580mm Max (3035mm Min)
4530
mm
Max
(231
0mm
Min
)
3810
mm
Max
(200
0mm
Min
)
Total rated load Outriggers at Maximum position2.53m/4.075m boom 5.575m boom 7.075m boom 8.575m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 1.4 2820 < 3.0 1220 < 3.6 820 < 4.0 550
1.5 2520 3.5 970 4.0 740 4.5 400
2.0 1920 4.0 780 4.5 580 5.0 340
2.5 1570 4.5 630 5.0 480 5.5 300
3.0 1220 5.0 530 5.5 430 6.0 270
3.5 970 5.205 530 6.0 380 6.5 230
3.705 920 6.5 350 7.0 200
6.705 330 7.5 180
8.0 150
8.205 150
Total rated load Outriggers at any other position2.53m/4.075m boom 5.575m boom 7.075m boom 8.575m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 1.5 1720 < 3.0 510 < 3.6 400 < 4.0 330
2.0 1070 3.5 410 4.0 330 4.5 280
2.5 630 4.0 330 4.5 280 5.0 230
3.0 520 4.5 280 5.0 230 5.5 180
3.5 430 5.0 230 5.5 180 6.0 160
3.705 350 5.205 200 6.0 160 6.5 150
6.5 150 7.0 100
6.705 140 7.5 80
8.0 70
8.205 60
Maximum Reach Below Ground LevelFour Fall Two Fall Single Fall
10.10m 20.20m 40.40m
Working Range Diagram
Working radius (m)
Lifti
ng h
eigh
t (m
)
The Working Range Chart does not take into account boom deflection under load.
Diagram shows outriggers at maximum position
67135 Kranlyft English Brochure.indd 9 30/3/09 14:45:38
-
10
MC305-2 CRM(E) Mini Crane
Features at a glance...
The MC305-2 is the first of the “ride on” Maeda mini cranes and is ex-tremely powerful for its small stature. Up to 2.98 tons of lifting power from a machine only 1280mm wide. The superior quality and engineer-ing of the Maeda product line gives longevity of use and higher return on rental investments are enjoyed by end users across the board.
2.98 Ton Lifting Capacity• 12.52m Max Lifting Height• Energy Saving System • Sheaves Protected Inside Boom • Variable (Hi/Lo) Travel Speeds • Programmable Moment Limiter • Hydrostatic Transmission • Centralized Controls • 4 Fall / 2 Fall Hook Block • Automatic Hook Stowage System • Tilt Sensor/Alarm • Powerful Two Speed Winch• Hydraulic Disc Brake • Remote Control• Outrigger Interlock System• 2 Year Warranty•
More Images...
General LiftingUneven Ground
100Glazing Installations Steel Erecting
Features at a
2.98 To•12.52m12.52m•Energy S• Sheaves• Variable• Program•Hydrost•Centrali• 4 Fall / • Automa•Tilt Sens•Powerfu• Hydraul• Remote • Outrigg•2 Year W•
More Images...
67135 Kranlyft English Brochure.indd 10 30/3/09 14:46:22
-
... consider the possibilities
11
Dimensions
SpecificationsCapacity Maximum 2.98 t x 2.5m
Working Radius Maximum 12.16m x 260kg
Lifting Height Maximum 12.52m x 790kg
Dimensions MC305 CRM(E) 4285mm x 1280mm x 1695mm
Weight MC305 CRMMC305 CRME
3900kg4040kg
Hook Speed Maximum 13.5m / min. (4 falls, 4th layer)
Single Line Speed Maximum 54m / min. (4th layer)
Hoist Rope Type IWRC 6 x WS (26) Ø 8mm x 73m
Telescopic System Boom lengthTelescoping speed
Boom type
3.695m - 12.485m8.79m / 38 sec (26 sec)Fully automatic 5 section pentagonal telescopic boom
Boom Hoist System Hoist angle / speed 0º - 80º / 21 sec. (14.5 sec)
Slew System Slew angle / speed 360º continuous / 2.4 rpm (1.7 rpm)
Outrigger System TypeMaximum extended
dimensions
Extension and set-up by hydraulic cylinders.(Length) 4888mm x (Front) 4504mm x (Rear) 4396mm
Traction System DriveTravel speed
GradabilityGround length x width
Ground pressure
Hydraulic motor driven, stepless speed changer0 - 2.8 km/h (1.3 km/h)23º1750mm x 300mm (Track dimensions)0.37 kgf / cm² (0.38 kgf / cm² CRME)
Engine ModelType
Rated outputStarting method
Fuel tank capacity
Yanmar 3TNV763 cylinder water cooled diesel 15.2 Kw / 2500 rpmElectric Diesel / 40L
Electric Motor(Optional)
TypeSize
Fully enclosed fan cooled motor 5.5 Kw 4P 380V
Standard Equipment Overwind protection, hydraulic safety valves, wire rope latch, level, machine body inclination alarm, EMO switch, travel lock lever, outrigger interlock device, moment limiter, working status lamp, hour-meter, 4-fall / 2-fall hook block, black rubber tracks and cable remote control.
Optional Equipment Radio remote control, white rubber tracks, single fall hook, searcher hook.
Total rated load Outriggers at Maximum position3.7m/5.945m boom 8.145m boom 10.315m boom 12.485m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 2.5 2980 2.7 2270 4 1080 < 4.5 790
3 2390 3 2120 4.5 985 5 660
3.5 1990 3.5 1680 5 880 6 520
4 1710 4 1440 6 770 7 430
4.5 1490 4.5 1260 7 670 8 380
5 1340 5 1110 8 570 9 340
5.62 1160 5.5 990 9 500 10 310
6 880 9.99 435 11 280
7 730 12.16 260
7.82 630
Total rated load Outriggers at Middle position3.7m/5.945m boom 8.145m boom 10.315m boom 12.485m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 2.5 2980 2.7 2270 4 1060 < 4.5 780
3 2360 3 2090 4.5 950 5 650
3.5 1960 3.5 1680 5 860 6 500
4 1680 4 1420 6 750 7 410
4.5 1380 4.5 1240 7 630 8 360
5 1140 5 1070 8 490 9 320
5.62 950 5.5 950 9 410 10 290
6 800 9.99 350 11 260
7 610 12.16 250
7.82 520
Maximum Reach Below Ground LevelFour Fall Two Fall Single Fall
16.09m 32.18m 64.36m
Total rated load Outriggers at Minimum position3.7m/5.945m boom 8.145m boom 10.315m boom 12.485m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 2.5 2980 2.7 2270 4 1060 < 4.5 780
3 2350 3 2090 4.5 950 5 650
3.5 1800 3.5 1680 5 860 6 500
4 1430 4 1370 6 680 7 410
4.5 1140 4.5 1120 7 530 8 360
5 950 5 910 8 420 9 320
5.62 790 5.5 790 9 340 10 290
6 670 9.99 300 11 240
7 510 12.16 210
7.82 430
Working Range Diagram
0
1
2
3
4
5
6
7
89
10
11
13
14
12
1 2 3 4 5 6 7 8 9 10 11 12 13
80º70º
60º
50º
40º
30º
20º
10º
0º
12.52m
Working radius (m)
Lifti
ng h
eigh
t (m
)
The Working Range Chart does not take into account boom deflection under load. Diagram shows outriggers at maximum position
1280mm
4285mm
1750mm1695m
m300mm
2170mm
1280mm
4504mm
3370mm
4888mm Max(4592mm Mid, 4291mm Min)
60º
50º60º
50º
4504
mm
Max
(411
0mm
Mid
, 371
2mm
Min
)
4396
mm
Max
(394
1mm
Mid
, 347
7mm
Min
)
67135 Kranlyft English Brochure.indd 11 30/3/09 14:46:28
-
12
MC405 CRM(E) Mini Crane
Features at a glance...
The MC405 is the most powerful of the MC range mini cranes with an outstanding 3.83 tons of lifting capacity. The optional fly jib increases the already impressive working range even further. This fantastic model also has an unique pick and carry feature of up to 500kg.
Fe
3.83Ton Max capacity• 16.8m Max Working Height (MWH)• 20.7m (MWH) With Optional Fly Jib • 500kg Pick & Carry Duty • Energy Saving System • Sheaves Protected Inside Boom • Variable (Hi/Lo) Travel Speeds • Programmable Moment Limiter • Hydrostatic Transmission • Centralized Controls • 4 Fall / 2 Fall Hook Block • Automatic Hook Stowage System • Tilt Sensor/Alarm • Powerful Two Speed Winch• Hydraulic Disc Brake • Remote Control• Outrigger Interlock System • 2 Year Warranty•
Uneven GroundTimber Frame Work
122Glazing Pick and Carry Restricted Access
More Images...
67135 Kranlyft English Brochure.indd 12 30/3/09 14:47:06
-
... consider the possibilities
13
SpecificationsCapacity Maximum 3.83 t x 2.7m
Working Radius Maximum 16.0m x 210kg
Lifting Height Maximum 16.8m x 1130kg (20.7m x 520kg with Fly-Jib)
Dimensions MC405 CRM(E) 4980mm x 1380mm x 1980mm
Weight MC405 CRMMC405 CRME
5600kg5750kg
Hook Speed Maximum 18m / min (4 falls, 4th layer)
Single Line Speed Maximum 72m / min. (4th layer)
Hoist Rope Type IWRC 6 x WS (26) Ø 8mm x 92m
Telescopic System Boom lengthTelescoping speed
Boom type
4.735m - 16.475m11.7m / 54.2 sec (41.3sec)Fully automatic 5 section pentagonal telescopic boom
Boom Hoist System Hoist angle / speed 0º - 80º / 24.5 sec (17 sec)
Slew System Slew angle / speed 360º continuous / 2.1rpm (2.5 rpm)
Outrigger System TypeMaximum extended
dimensions
Extension and set-up by hydraulic cylinders.(Length) 5786mm x (Front) 5118mm x (Rear) 5520mm
Traction System DriveTravel speed
GradabilityGround length x width
Ground pressure
Hydraulic motor driven, stepless speed changer0 - 3.3 km/h20º1720mm x 320mm (Track dimensions)0.50 kgf / cm² (0.52 kgf / cm² CRME)
Engine ModelType
Rated outputStarting method
Fuel tank capacity
Yanmar 3TNV88-BPMB3 cylinder water cooled diesel 21.4 Kw / 2400 rpmElectric Diesel / 60L
Electric Motor(Optional)
TypeSize
Fully enclosed fan cooled motor 7.5 Kw 4P 380V
Standard Equipment Overwind protection, hydraulic safety valves, wire rope latch, level, machine body inclination alarm, EMO switch, travel lock lever, outrigger interlock device, moment limiter, working status lamp, hour-meter, 4-fall / 2-fall hook block, black rubber tracks and cable remote control.
Optional Equipment Radio remote control, white rubber tracks, single fall hook, searcher hook and fly-jib.
Total rated load Outriggers at Maximum position4.735m/7.695m boom 10.655m boom 13.565m boom 16.475m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 2.7 3830 3.5 3030 4 2230 5 11303.5 3030 4 2580 4.5 1930 5.5 9804 2580 5 2030 5 1730 6 9105 2030 6 1680 6 1400 7 7606 1680 7 1380 7 1180 8 6507 1380 8 1130 8 1030 9 600
7.25 1330 9 880 9 930 10 55010.2 580 10 830 11 490
11 690 12 44012 530 13 380
13.1 430 14 32015 26016 210
Maximum Reach Below Ground LevelFour Fall Two Fall Single Fall
20.50m 41.00m 82.00m
Working Range Diagram & Fly Jib total rated load chart
19
20
21
22
20.7
Working radius (m)
Lifti
ng h
eigh
t (m
)
Total rated load Outriggers at Middle position4.735m/7.695m boom 10.655m boom 13.565m boom 16.475m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 2.7 3830 3.5 3030 4 2230 5 11303.5 3030 4 2580 4.5 1830 5.5 9804 2580 5 1880 5 1630 6 9105 1880 6 1430 6 1330 7 7306 1430 7 1130 7 1080 8 6307 1160 8 880 8 880 9 550
7.25 1120 9 740 9 730 10 48010.2 490 10 530 11 430
11 480 12 38012 430 13 330
13.1 330 14 28015 22016 180
Total rated load Outriggers at Minimum position4.735m/7.695m boom 10.655m boom 13.565m boom 16.475m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
< 2.7 3830 3.5 3030 4 2230 5 11303.5 3030 4 2580 4.5 1830 5.5 9804 2580 5 1680 5 1630 6 8805 1680 6 1180 6 1180 7 7306 1180 7 880 7 830 8 5307 930 8 730 8 680 9 450
7.25 780 9 580 9 550 10 42010.2 400 10 430 11 370
11 380 12 33012 350 13 280
13.1 310 14 24015 19016 150
The Working Range Chart does not take into account boom deflection under load.
DimensionsDimensions
1720mm
4980mm
1980
mm
1380mm320mm
2600mm
Diagram shows outriggers at maximum position
5520
mm
Max
(4
888m
m M
id, 4
248m
m M
in)
5118
mm
Max
(456
6mm
Mid
, 400
8mm
Min
)
5786mm Max(5372mm Mid, 4953mm Min)
Fly Jib
Boom angle(deg)
kg
72+ 52069 42066 32063 25060 22055 170
67135 Kranlyft English Brochure.indd 13 30/3/09 14:47:12
-
14
LC785B Crawler Crane
The Maeda LC785 crawler crane manages a monstrous lift capacity of 4.9 tons while using no outriggers. The air conditioned cab is a pleasurable place to be while working with the machine and with near zero tail swing, this crawler crane is a class leader in safety on site.
Features at a glance...
4.9 Ton Max capacity• 16.35m Max Working Height (MWH)• 20.3m (MWH) With Optional Fly Jib• Blade• 2000kg Pick & Carry Duty • Minimal Tail Swing • Fully Enclosed Air Conditioned Cab • Steel Tracks (optional rubber pads)• Variable (Hi/Lo) Travel Speeds • Programmable Moment Limiter • Hydrostatic Transmission • 4 Fall / 2 Fall Hook Block • Tilt Sensor/Alarm • Powerful Two Speed Winch• Hydraulic Disc Brake • 2 Year Warranty•
GlazingRestricted Access
144Railway Maintenance Industrial Maintenance General Lifting
More Images...
67135 Kranlyft English Brochure.indd 14 30/3/09 14:47:46
-
... consider the possibilities
15
SpecificationsCapacity Maximum 4.9t x 2.1m
Working Radius Maximum 14.52m x 200kg
Lifting Height Maximum 16.35m x 1400kg (20.3m x 430kg with Fly-Jib)
Dimensions LC785B 5020mm x 2350mm x 2685mm
Weight LC785B 10250kg (10420kg with Fly-Jib)
Hook Speed Two Speed 27/39m / min (4 falls, 4th layer)
Single Line Speed Two Speed 108/156m / min (4th layer)
Hoist Rope Type IWRC 6 x Fi (29) Ø 10mm x 115m
Telescopic System Boom lengthTelescoping speed
Boom type
4.63m - 15.63m11m / 24.5 sec.Fully automatic 5 section pentagonal telescopic boom
Boom Hoist System Hoist angle / speed -2º to 80º / 12.5 sec.
Slew System Slew angle / speed 360º continuous / 2.4 rpm
Drive Type Independent steering controls, hydraulic piston motor with built-in automatic brake, planet reduction gears and sprocket crawler.
Traction Speed LowHigh
GradabilityGround length x width
Ground pressure
0 - 2.5km/h0 - 3.8km/h20º2235mm x 450mm (Track dimensions)0.51 kgf / cm² (0.52 kgf / cm² with Fly-Jib)
Engine ModelType
Rated outputStarting method
Fuel tank capacity
Komatsu S4D95LE-3-A4 cylinder diesel, water cooled, direct injection 40.5 Kw / 1850 rpmElectric Diesel / 141L
Standard Equipment Moment limiter, steel tracks, overwind protection, hydraulic safety valves, level, EMO switch, working status lamp, air conditioning, 4-fall / 2-fall hook block, working light, hour-meter, inclination alarm and blade.
Optional Equipment Single fall hook block, black or white rubber pads and fly-jib.
Working Range Diagram & Fly Jib total rated load chart
0
12
3
4
5
67
8
9
10
11
12
13
14
15
16
17
18
1 2
3.52m 6.27m 9.02m 11.77m 14.52m
16.35m
3 4 5 6 7 8 1514131211109
80º
70º
60º
50º
40º
30º
20º
10º
0º
19
20
21
22
23
55º
20.30m
Working radius (m)
Lifti
ng h
eigh
t (m
)
The Working Range Chart does not take into account boom deflection under load.
Total rated load4.63m boom 7.38m boom 10.13m boom 12.88m boom 15.63m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
2 4900 2 4900 2 2600 2 2000 22.5 3800 2.5 3760 2.5 2600 2.5 2000 2.5 14003 2900 3 2980 3 2310 3 2000 3 1400
3.5 2290 3.5 2420 3.5 2010 3.5 1890 3.5 14004 4 2000 4 1750 4 1650 4 1400
4.5 4.5 1670 4.5 1530 4.5 1450 4.5 13205 5 1400 5 1340 5 1280 5 12006 6 1000 6 1030 6 1010 6 9907 7 7 780 7 800 7 8208 8 8 580 8 630 8 6809 9 9 410 9 500 9 56010 10 10 10 390 10 45011 11 11 11 300 11 36012 12 12 12 12 28013 13 13 13 13 21014 14 14 14 14 200
14.52 14.52 14.52 14.52 14.52 200
Pick & Carry Duties4.63m boom 7.38m boom 10.13m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
2 2000 2 2000 2 14002.5 2000 2.5 2000 2.5 14003 1670 3 1700 3 1360
3.5 1330 3.5 1380 3.5 11704 1140 4 1020
4.5 960 4.5 8905 810 5 770
5.5 690 5.5 6806 590 6 590
6.27 540 6.27 5506.5 5107 440
7.5 3808 320
8.5 2709 230
9.02 230
The Total Rated Load Charts are based on the actual working radius including boom deflection. The weight of the hook (standard 4 fall - 90kg) must be included as part of the load shown in the Total Rated Load Charts.
When using two fall or single fall hooks, use the appropriate four fall Total Rated Load Chart above but with a maximum load of: Two Fall - 2450kg, Single Fall - 1220kg.
Pick & Carry duties are available at boom lengths up to 10.13 metres.
Maximum Reach Below Ground LevelFour Fall Two Fall Single Fall
24.50m 50.50m 103.50m
Dimensions
2350mm
450mm450mm
2840mm
5020mm
2685
mm
3297mm
2235mm
Fly Jib
Boomangle(deg)
Jib length
3.0m 4.7m
80 430 43070 430 43065 330 33060 230 23055 130 130
67135 Kranlyft English Brochure.indd 15 30/3/09 14:47:52
-
16
LC1385B Crawler Crane
Features at a glance...
The LC1385 is an innovative powerhouse. It boasts many market leading features including a massive 6 ton lifting capacity, 16.26m boom, optional fly jib with 0-60º offset, rear view camera and front blade as standard.
6 Ton Max capacity• 16.70m Max Working Height (MWH)• 22.0m (MWH) With Optional Fly Jib• 2000kg Pick & Carry Duty• Blade• Programmable Moment Limiter• Rear View Camera• Steel Tracks (optional rubber pads)• Hydrostatic Transmission• Fully Enclosed Air Conditioned Cab• 4 Fall / 2 Fall Hook Block• Tilt Sensor/Alarm• Powerful Winch• Hydraulic Disc Brake• Two Speed Winch• Automatic Pentagonal Section Boom• Minimal Tail Swing• 2 Year Warranty•
More Images...
67135 Kranlyft English Brochure.indd 16 30/3/09 14:48:16
-
... consider the possibilities
17
SpecificationsCapacity Maximum 6.0 t x 2.6m
Working Radius Maximum 16.10m x 430kg
Lifting Height Maximum 16.70m x 2600 kg (22m x 820kg with Fly-Jib)
Dimensions LC1385B 6545mm x 2490mm x 2965mm
Weight LC1385B 15640kg (15850kg with Fly-Jib)
Hook Speed Two Speed 28/41m / min. (4 falls, 4th layer)
Single Line Speed Two Speed 112/164m / min (4 layers)
Hoist Rope StandardOptional
IWRC 6xFi (29) Ø 10mm x 115mIWRC 6xFi (29) Ø 10mm x 160m
Telescopic System Boom lengthTelescoping speed
Boom type
4.745 m - 16.265 m11.52 m / 25 secFully automatic 5 section pentagonal telescopic boom
Boom Hoist System Hoist angle / speed -5º to 80º / 18 sec
Slew System Slew angle / speed 360º continuous / 3.4 rpm
Drive Type Independent steering controls, hydraulic piston motor with built in automatic brake, planet reduction gears and sprocket crawler.
Traction speed LowHigh
GradabilityGround length x width
Ground pressure
2.9 km/h5.1 km/h34°2880mm x 500mm (Track dimensions)0.54kgf/cm20.55kgf / cm2 (With Fly-Jib )
Engine ModelType
Rated outputStarting method
Fuel tank capacity
KOMATSU SAA4D95LE-5 4 cylinder diesel, water cooled, direct injection 68.4 Kw / 2,200 rpmElectricDiesel/195L
Standard Equipment Moment limiter, steel tracks, overwind protection, hydraulic safety valves, level, EMO switch, working status lamp, working light, hour meter, inclina-tion alarm, air conditioning, 4-fall / 2-fall hook block, blade, rear view camera.
Optional Equipment Single fall hook, rubber pads, fly-jib.
Working Range Diagram & Fly Jib total rated load chart
19
20
21
22
23
24
(22.0m)
(16.7m)
4.58 7.46 10.34 13.22 16.10
Working radius (m)
Lifti
ng h
eigh
t (m
)
Total rated load4.745m boom 7.625m boom 10.505m boom 13.385m boom 16.265m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
2 6000 2 6000 2 3000 2 N/A 2 N/A2.5 6000 2.5 6000 2.5 3000 2.5 3000 2.5 N/A3 5250 3 5260 3 3000 3 3000 3 2600
3.5 4450 3.5 4460 3.5 3000 3.5 3000 3.5 26004 3830 4 3820 4 3000 4 3000 4 2600
4.5 3320 4.5 3310 4.5 3000 4.5 3000 4.5 26005 5 2880 5 2710 5 2640 5 26006 6 2210 6 2140 6 2100 6 20807 7 1720 7 1720 7 1710 7 17108 8 8 1400 8 1430 8 14309 9 9 1150 9 1200 9 121010 10 10 940 10 1020 10 104011 11 11 11 880 11 89012 12 12 12 750 12 77013 13 13 13 650 13 67014 14 14 14 14 58015 15 15 15 15 50016 16 16 16 16 440
16.1 16.1 16.1 16.1 16.1 430
Pick & Carry Duties4.745m boom 7.625m boom 10.505m boom
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
Working radius (m)
Total rated load (kg)
2 2000 2 2000 2 15002.5 2000 2.5 2000 2.5 15003 2000 3 2000 3 1500
3.5 2000 3.5 2000 3.5 15004 1915 4 1910 4 1500
4.5 1660 4.5 1655 4.5 15005 1440 5 1355
5.5 1260 5.5 12006 1105 6 10707 860 7 860
7.5 7758 700
8.5 6359 57510 470
The Total Rated Load Charts are based on the actual working radius including boom deflection. The weight of the hook (standard 4 fall - 90kg) must be included as part of the load shown in the Total Rated Load Charts.
When using two fall or single fall hooks, use the appropriate four fall Total Rated Load Chart above but with a maximum load of: Two Fall - 3000kg, Single Fall - 1500kg.
Pick & Carry duties are available at boom lengths up to 10.505 metres.
Dimensions
Maximum Reach Below Ground LevelFour Fall Two Fall Single Fall
24.50m 50.50m 103.50m
2490mm
500mm500mm
6545mm
2965
mm
3610mm4280mm
2880mm
Fly Jib
Boom angle(deg)
Jib tilt angle
0 deg
20 deg
40 deg
60 deg
80 820 820 620 62075 820 820 620 62070 720 720 520 52065 620 620 420 42060 420 42055 420 42050 320 32045 220 220
The Working Range Chart does not take into account boom deflection under load.
67135 Kranlyft English Brochure.indd 17 30/3/09 14:48:21
-
18
Gallery
67135 Kranlyft English Brochure.indd 18 30/3/09 14:48:49
-
... consider the possibilities
19
67135 Kranlyft English Brochure.indd 19 30/3/09 14:49:00