MADA

CSW-250/CSHW-22D/CS-EE0

oMADA•; I '

d

The CS-Series provides easy, precise, fast and Varied no

Amada provides a wide varietyof corner shearing machines tosuit your particular requirements.

Amada corner shearing machines are hy-draulically operated for lower noise emission, minimizing operator fatigue and providing a better work environment.A convenient foot switch permits theoperator to use both hands for work manipulation,Two operational modes are available,"Safety Once", and "Continuous". The"Continuous" mode allows for a timed interval setting (0—12 sec/50Hz, 0—10 sec/60Hz),Easy clearance adjustment between bladesprovides smooth, clean cuts with variedthicknesses and materials.Workholder prevents workpiece movement during cutting for guaranteed precision and safe operation.Easy tool change enables a wide processingrange. The tool is changed as a single edgenotch unit, simply by using the clamp lever.

CSHW-220

For thick sheet corner

notching and edge notchingFor corner notching,notching, and punchi

g for sheet metal industry.CS 220

For corner notching

NotchingExample

CS-220 CSHW-220

o

CORNER

NOTCHING

O P

CSW-250

TJ

lU

EDGE NOTCHING &

PUNCHING

1

■ Edge Notching

Amada offers a wide selection of tooling of variousshapes and sizes.

mm

Radius

Edge notch V-notch

CSW-250

Min.20mm (0.79 in.) WX

150mm (5.91 in.) L

Max. 100mm (3.94in.) WX

150mm (5.91 in.) L

1 5° or greater

CSHW-220

Min.20mm (0.79 in.) WX

100mm (3.94in.) L

Max.100mm (3.94 in.)WX

100mm(3.94in.) L

30° or greater

■ Corner Radius

Notching

Both corner radius cuttingand corner notching areavailable with the optional"Corner Radius Bracket"and "Ten Corner"radiusset.

2, 3. 4, 5. 6, 7, 8, 10, 15(Max, corner notch = 20mm)

3/32, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2,5/8 {Max. corner notch = 3/4")

■ Punching

Punching capabi l ity is also possible with theoptional "Punch Holder Bracket". Punchingtools are available in various shapes and sizes.

Max. work area (XxY): 390x 100mm(15.35 x 3.94tn.]Max. punch dia.: 50.8mm (2in.J-1.6mm(0.063in.)(mild steel) thickness

25mm (0.94in.l-3.2mm(0.125in.)thickness

• Stop Position Display

An LED digital counter displaysstopped position in 0.05mm or0.005" increments, enabling easypositioning for corner notching.This counter shows dimensionsat 45°, 90° and 135° against theblade, providing easy operations.

Easy Work Positioning

SD.OO\

TH.! 50.0DR

MQoa

• Scale and Fine AdjustmentKnob

A scale allows for easy positioning of small materials. A fineadjustment knob for X-axis andauxiliary workstop on Y-axis islocated on the edge notch side,

i

Workholder

The workholder holds the workpiecewhile the blade lowers, to preventdeviation during cutting, ensuringaccuracy and safety.

Easy Clearance Adjustment

A dial located at the table front.on thecorner notching side, quickly sets themost suitable clearance according tothe sheet material and thickness.

(Model CS-220 differently structured)

CS-220

Digital counter

Workholder

Ram guide typePost slide

Gib slide

Punch set holder bracket (PS tool-B type)

Corner radius bracket|Ten corner radius set availablel

Turntable

Two-edged lower blade (corner notch side)

Clearance adjuster

tv-"standard : j -optional —not available

hign Strength Post Style RamGuide

The ram moves vertically along a highstrength twin post slide, maintaininghigh accuracy for a long period of time.Oil-less bearings eliminate the necessityof daily maintenance.

CSW-250

Economical Lower Blade

A two-edged lower corner notch bladedoubles the time between sharpenings.

Corner Notching and EdgeNotching at the Same Position

Amada's optional turntable allows themachine to be turned 180° by a footpedal, Both corner and edge notchingcan be carried out at the same operatorposition, saving space.

CS-2203801T5.0)

1.070(42.1

1.125(44.3)370(14.61 550(21.7

740(29.1! 685(27.0

CSW-250

1.100(43.3) 200(7.9)720128.3)

1,120(44.1)200(7.9)

125(4.91'

530(20.91 1 400(15.71

93036.6125(4.91

CSHW-220

1,100(43.3172028.31

00(7.9]1,120(44.1

200(7.9)

Bi^"64adi

125(4,9)

^SSQiMai 400(15.7)930136.61

105(4,1)

SPECIFICATIONS

Model CS-220 CSW-250 CSHW-220

Max. sheet thickness [mild steel] mm (in.) 3.2 (0.125) 3.2 (0.125) 6 (0.236)

Notching dimensions mm (in.)Corner notch 220x220(8.66x8.66) 250X250(9.84X9.84) 220X220(8.66X8.66)

Edge notch(XxY) 50- 150(1.97x5.91)100x150(3.94 • 5.911 (VlAX.50 ■ icon 97 • 3.94)

100 < 100 (3.94 • 3.94) MAX.

Stroke length mm (in.)Corner notch 22 (0,87) 24 (0.94) 26 (1.02)

Edge notch 24.5 (0.96) 24 (0.94)

Strokes per minute s.p.m.Corner notch 35(50Hz), 42 (60Hz) 35(50Hz).42(60H2) 34(50Hz). 40(60Hz)

Edge notch 34(50Hz).40(60Hz) 35 (50Hz), 42(60H2)

Max. tonnage tons (U.S. tons) 10(11) 10(11) 25 (27)

Hydraulic pump motor kW 2.2 2.2 3.7

Pump capacity 50Hz 27 (0.95) 25 (0.88) 18.5(0.65)

(No load) liter/min.(ftymin.) 60Hz 32(1.13) 30(1.06) 22.4 (0.79)

Max. pressure kg/cm^ (psi) 70 (996) 70 (996) 190(2703)

Hydraulic tank capacity liters(U,S, gal) 60(15.9) 55 (14.5) 55 (14.5)

Weight kg (lb) 900 (1985) 1300(2870) 1600 (3530)

Specifications are subject to change without prior notice.

MADAAMADA COMPANY. LTD.

200, Ishicia, Isehara-shi,

Kanagawa 259-11 JapanPhone;0463-96-1111

Telex:3882-311 AMADAJ

U.S. AMADA, LTD,

7025 FiresTone Blvd., Buena Park,California 90621 U.S.APhone:(714)739-2111

Telex: 183346 USAMADA BNPK

AMADA U.K. LIMITED

Spennells Valley Road, Kidderminster,Worcester DYIO IXS, EnglandPhone; (05621747678Telex: 51338187 AMADA G

AMADA GmbH

5657, Haanl. Landstr.23, P.R.GermanyPhone:02129-55620

Telex:418515001 AMADA D

AMADA TAIWAN INC.

s Yi :r Jr. H ti ■ n4l\

Phone: 102)782-7395-7

Telex:785-14919 AMADA TPE

0 JZ-0401-8676 Pnniecf in Japan.