machine-tools allied with the wind -...
Transcript of machine-tools allied with the wind -...
C M Y CM MY CY CMY K
machine-toolsallied with the wind
C M Y CM MY CY CMY K
DANOBAT GROUP 3 - 5
Applications 6 - 7
· Tower 8
· Wind Turbine Blade 9
· Hub 10 - 11
· Nacelle 12 - 13
· Gearbox 14 - 15
· Generator 16 - 17
· Pitch & Yaw Gear Motors 18
· Bearings & Flanges 19 - 20
Machines 21
· Fully Automated Composite Parts Manufacturing Process 22
· Sawing & Drilling, and 3D Plasma Cutting Machines 23
· Turning Machines 24
· Boring Mill Centers 25
· Grinding Machines 26 - 27
Index
2
C M Y CM MY CY CMY K
Your Global Business PartnerDANOBATGROUP, with more than fifty five years of experience, offers a range of advantages whichhelp your company to satisfy your manufacturing needs.
DANOBATGROUP is the largest machine toolmanufacturer in Spain. Over the last 55 years,DANOBATGROUP has supplied machines to highlyreputed customers, consolidating a worldwide presence.
DANOBATGROUP is the machine tool division of oneof the most important Spanish industrial holdings,MONDRAGON corporation.
DANOBATGROUP is specialized in different manufacturingtechnologies (boring & milling, grinding, turning,bandsawing, fully automated composite partsmanufacturing process, drilling and punching).
This wide range of products are marketed under twoworld renowned brands: SORALUCE (boring & milling)
and DANOBAT (lathes, grinders, punch presses,bandsaws and composite processing machines).
With top class manufacturing plants in Spain, Germanyand UK and sales and service offices all over the world,DANOBATGROUP is a reliable global supplier of provensolutions for different manufacturing and machiningprocesses. A determined commitment to become YOURGLOBAL BUSINESS PARTNER.
3
TOTAL: 15,526 TOTAL: 91,511
* 2008 data
One Leading Machine Tool Group, two distinguished brands
13,989
6,282 9,162
13,989 6,282 9,162
38,868
48,687
1,045
2,911
38,8682,911 48,687 1,045
C M Y CM MY CY CMY K
DANOBATGROUP offers a wealth of accumulated knowledge ofdifferent machining technologies to the market. Completemanufacturing processes or specific machining operations can beprovided. Wind Power Generation, Aerospace, Automotive, Railwaysand Capital Goods are focused sectors of DANOBATGROUP’sindustrial strategy.
DANOBATGROUP offers the wind energy sector customized solutionsfor the manufacturing of blades, hubs, nacelles, gearboxes, rings,towers and other components of an aerogenerator.
The combination of different machining technologies such as sawing,turning, boring & milling, grinding and composite process automationallows to DANOBATGROUP to provide complete turn-key projectsto our customers.
The Group is highly focused on the Wind Energy Sector, as beingmember of “Spanish Wind Energy Association” (AEE),“AmericanWind Energy Association” (AWEA) and founding member of “SpanishEnergy Supply Chain” (ESC).
4
around the World
turnover250
200
150
100
50
02004 2005 2006 2007
(M €)
2008
137 140
187208
232
personnel1400
1200
1000
800
600
400
200
02004 2005 2006 2007 2008
1007 1033 1036
13001330
international sales
02004 2005 2006 2007 2008
109 104119
139
176
(M €)
250
200
150
100
50
OEM
ALSTOMENERCONGAMESAGENERAL ELECTRICSIEMENSSUZLONVESTAS
OEM SUPPLIERS
ALFONS DIECKMANNA+SATA GEARSBECKMANN VOLMERB+SECHESAEIKHOFFEMUSIENDAKIEOZENEUSKALFORGINGEUSKOFEST SPAN
ReferencesMOVENTASPERKEORENKREXROTHSE FORGESEWSTORK GEARSWÜSTHOFFWUXI SANWEIWUXI WANLIZ+F
FLENDERGET GAMESAHCHELDECOINGETEAM INDARJIANGSU WENHUIJ. M. MENDIOLAKERSTENKINKELEKLINGELNBERGLAKBERMAN DIESELMOL-MATRIC
C M Y CM MY CY CMY K
5
The Ultra-precision shop of Ideko ik4 (see above), temperature and humidity controlled, is dedicated to carry out research projectsand development of machines, components, measuring systems and contains testing equipment for ultra-precision applications.
The prototype shop of Ideko ik4 (800 m2), is dedicated to researchprojects on machining processes; its major activity is with partnershipprojects with machine end users. The shop, temperature controlled at±0.5º, serves as a showroom of the technological capacity ofDANOBATGROUP; carrying out trial tests, developing research projectsfor the members of the Group, optimizing traditional processes anddeveloping new ones.
Within the DANOBAT GROUP, IDEKO ik4 develops the R+D+I activities.
C M Y CM MY CY CMY K
Applications
sawingturningdrillinggrinding
BEARINGS &FLANGES
page 19 - 20
grinding
PITCH & YAWGEAR MOTOR
page 18
HUBboring & milling
page 10 - 11
page 9
WIND TURBINE BLADEfully automatedmanufacturing process
WIND TURBINE BLADE
HUB
NACELLE
GEARBOX
GENERATOR
PITCH & YAW GEAR MOTOR
BEARINGS & FLANGES
TOWER
AutomatedComposite Parts Sawing Drilling Turning Boring & Milling Grinding
ProductionTechnologies
6
C M Y CM MY CY CMY K
GENERATORturninggrindingboring & milling
page 16 - 17
millingsawingdrillingplasma cutting
TOWER
page 8
boring & milling
NACELLE
page 12 - 13
turninggrinding
boring & milling
GEARBOX
page 14 - 15
E
7
C M Y CM MY CY CMY K
By two opposed moving column milling machines, the completemachining of the tower edges metal-sheet is carried out in one set-up.
The combination of SORALUCE’s Digitmill software and special tooling allows bothhigh accuracy and productivity, achieving high quality chamfers for subsequentautomatic welding, avoiding manual adjustment and reducing manpower costs.
. DIGITMILL enables the correction of the machining program of big size componentsaccording to the deformation error on them, providing high quality chamfering.
Advantages:
· Assistance to the operator
· Improvement of the performance of the machine
8
TOWER sawing · drilling · milling
Sawing & drilling, and plasma cutting lines for the internalmetal structures of towers.
The extensive know-how acquired over many years of product developmenthas enabled DANOBAT to expertly design, manufacture and comission fullyautomatic sawing and drilling lines for metal structure applications such asinternal structures of towers.
C M Y CM MY CY CMY K
WIND TURBINEBLADE fully automated
manufacturing process
DANOBAT offer new technologically advanced solutions forautomating and controlling of the wind blade manufacturing process.
9
Automated stages
· Glass lay-up· Glue & Gel-coat application· Edge trimming & Surface grinding· Measuring & inspection
Working in consonance with its customers/partners toboost their competitiveness, will increase output andcost efficiency:
Danobat introduces autocontrol procedures in each stepin order to achieve a high fabrication process reliability.
• lead-time reduction > 45%• human labour reduction > 60%• material consumption reduction > 10%• blade repeatability & quality improvement > 60%
C M Y CM MY CY CMY K
10
HUB boring & milling
SORALUCE provides high performance, reliable and accuratemachining of hubs, one of the most complex and critical part of awind turbine, providing:
SORALUCE multi purpose boring mill centers offer a full machining and verificationprocess of hubs, including simulation, milling, boring, drilling, tapping and measuringoperations.
· Machining of the blade support face· Machining of the generator support face· Machining of the nose support face
C M Y CM MY CY CMY K
11
- Top quality machining heads, which are robust, flexible and reliable
- Development of new heads to suit special manufacturing requirements
- Automatic head changing systems for unattended machining processes
- Rigid high powered machines for heavy stock removal
- Thermal stability and dynamic adjustment of the machine
- A wide range of accessories to ensure the machine is exactly matched to thecustomer’s requirements
- The complete machining of a hub in only 2 set-ups
- Turn-key projects: clamping fixtures, cutting tools, CAD-CAM processing, simulation,training, production launch support is always at your disposal.
SORALUCE provides complete machining solutions with thefollowing available at your disposal:
C M Y CM MY CY CMY K
12
boring & millingSORALUCE introduces the verification procedure in order to detectand avoid beforehand possible errors, potential collisions, or areasof inefficiency by machining process simulation. This processenables errors to be detected and corrected even before the programis loaded into the machine control, thereby removing the need ofmanual prove out.
Furthermore, the verification allows for the optimization of program cutting speedsto ensure a more efficient machining process.
The SORALUCE machining process provides both the reliability and the level ofperformance required in the manufacture of high-value components in the wind powersector.
NACELLE
C M Y CM MY CY CMY K
13
Main operations carried out in the nacelle:
· Machining of the tower point face.· Machining of the jaws bore face.· Machining of the generator fitting face.
C M Y CM MY CY CMY K
GEARBOXShaftGearHousing
turning · grindingboring & milling
High precision OD grinding machinesHG-62/72/92 are flexible solutions for universal or production grinding. They can be used forcomponents from 600 to 6,000 mm length. The HG-62/72/92 grinding machines offer reliableand accurate customer-specific solutions providing:· Different grinding operations in one clamping· DANOBAT made electro spindles on “B” type swivelling wheelheads· Wide range of compact swivelling wheelheads· MDM absolute measuring system is available
14
Turning CentersDANOBAT has within the TCN family a wide range of turning centers for the turning of gearboxshafts. Configuration of lathes may be adjusted according to each particular requirementsdue to the modular design concept, which provides the most cost effective machine solution.Keyways may be also finished accurately on the same clamping using the Y axis.
Shaft
C M Y CM MY CY CMY K
GearVertical Turning CentersThe DANOBAT VTC range of machines providessolutions for high precision applications.The VTC features ensure optimum performanceaccuracy and repeteability.· Ram size:
250 mm x 250 mm – 300 mm x 300 mm· Table drive motor:
60 kW – 80 kW – 100 kW
HousingThe SORALUCE multi-purpose boring mill centers offer exceptional versatility and enhancedproductivity benefits for gearbox components. The automatic head changing systems together withaccurate rotary and travelling tables allow high precision machining of components in a single set-up, enabling to achieve high concentricity requirements demanded on those parts.
15
Vertical Grinding MachinesDANOBAT offers high capacity vertical grindingmachines for the machining of wind turbinegears. The DAN-VTG series provides:· Internal, external and surface grinding· “B” axis and automatic tool change· Probing software· Hard turning option
· Size and taper gauging· Pre-grinding measuring cycles· Interrupted process measuring cycles· Post process measuring andcomparison with grinding tolerances
High precisionAccurate profiled tapersPost process grinding report
C M Y CM MY CY CMY K
16
GENERATORStator & RotorShaftSupport
Stator & RotorVertical Turning Centers
The VTC range of machines combines high turning performance andhigh accuracy over the machine lifetime.
The modular design enables a wide range of specifications to beconfigured in a short time and to be produced quickly, efficiently andcost effectively.
· Maximum turning diameter: 6,000 mm
· Table drive motor: 60 kW – 80 kW – 100 kW
turning · boring & milling · grinding
C M Y CM MY CY CMY K
High precision grinding machines
· Longitudinal travel: 600 – 6,000 mm
· Swing 900 mm
· Twin wheel on “B” axis
· MDM absolute measuring system
SupportSORALUCE boring & milling machines are prepared toreach the most difficult-accessible areas of a generatorframe. The wide range of milling heads and the automatichead changing system turns the boring & milling machineinto a flexible machining center ready to machine differentmaterials, shapes, requiring various stock removals.
B2B1 B6
B8 B9 B10 B11
17
Turning CentersDANOBAT lathes allow the possibility to remove high chip volume with the special configuration for generatorshafts, featuring a double turret lathe. Driven tools may be also incorporated, enabling to combine differentoperations in a single machine.
High precision “B” axis
The European patented Danobat’s exclusive high precisionintegrated swivelling “B” axis, provides accurate wheelheadpositioning:
· Driven by a torque motor
· Direct read out of axis position
· High rigidity
· Maintenance free
Shaft
S
C M Y CM MY CY CMY K
For the grinding of pitch & yaw systems, DANOBAT proposes external andinternal/external high precision grinding machines equipped with natural granite bedand linear motors technology.
. Internal/External grinding machines:
· Turret with up to four spindles
· Radii grinding
· Post process gauging
grinding
. High precision grinding machines:
· Longitudinal travel: 400 – 600 mm
· Swing 300 mm
· Wheelhead on “B” axis
· MDM absolute measuring system
· One finished part in one clamping
18
PITCH & YAWGEAR MOTORS
C M Y CM MY CY CMY K
sawing · turning · milling
Accurate milling and drilling operations, working in pendulum loading,resulting in massive cost savings.
19
BEARINGS &FLANGES
High production horizontal cutting machines to start the process ofmanufacturing of rings.
There are two different solutions: a wagon system to support veryheavy components or gantry type sawing machine with portablesawhead.
· Maximum sawing diameter: up to 2,500 mm
· Length: 2-3…12 meters. According to customer's requirements.
Milling & Drilling
Sawing
C M Y CM MY CY CMY K
Vertical Turning Centers
Proven performance in combining turning and drilling operations withhigh precision and productivity.
Possibility of adding a second Ram for simultaneous machining andmaximum metal removal.
· Maximum turning diameter: 6,000 mm
· Table drive motor: 60 kW – 80 kW – 100 kW
BEARINGS& FLANGES
20
C M Y CM MY CY CMY K
Machines
Grinding Machines
ProductionGrindingMachines
InternalGrindingMachines
VerticalGrindingMachines
page 27page 26 page 27
Boring Mill Centers
page 25
Turning Machines
HorizontalLathesTurningCenters
VerticalTurningCenters
page 24
Sawing & Drilling, and 3D Plasma Cutting Machines
page 23
21
Fully Automated Composite Parts Manufacturing Process
page 22
Sawingmachines
Sawing &Drillinglines
3D Plasmacuttingmachines
page 23 page 23
page 24
C M Y CM MY CY CMY K
22
Highlights:
· Own new developed technology
. Fabric Automatic Deposition (D.A.F.), either dryor impregnated, onto the mould under set-uppressure
. Ultrasonic based cutting system
. Auto-controlled roll storage
· Automatic reel feeder
· In-line impregnation possibility
· Auto-control systems
· In-machine curing
· Mould extraction
Fully Automated Composite PartsManufacturing Process
Longitudinal travel
Vertical travel
Cross travel
Resine type
Fibre type
Fabric type
Fabric reel diameter
Fabric reel length
units DAF
m 8 - 200
m 2 - 7
m 2 - 20
- Poliester / Vinil-ester / Epoxy
- Glass / Carbon / Basalt
- Unidirectional / Multiaxial / 3D / Mat
mm 10 - 1000
mm 10 - 2000
Fully automated manufacturing process of large structural composite parts.
Close to our customers, Danobat offer especially customised machines, critical in production lines,covering the complete machine life cycle, which results in a REPEATABILTY & QUALITY improvementas well as a LEAD TIME reduction.
. Auto positioning with respect to the mould
· Flexible to customer requirements
. Modularity concept
· Teleservice. Quick diagnosis and remote problemsolutions
· Offline simulation and programming
· Advance data managing and control solution
· Traceability of manufactured parts
· Safe-working conditions assured by theimplantation of protections according to CEStandards
C M Y CM MY CY CMY K
Sawing & Drilling, andPlasma Cutting Machines
23
Highlights:· Machine prepared to work with bimetal & carbide blades· Automatic cutting parameters software “'PASO A PASO”· Intelligent cutting deflection control· Automatic running in process
Max. cutting capacity
Band sizes
Main motor power
units GH/CP-TV
mm 2,500
mm 54 / 67 / 80x1,6
kW up to 25
Sawing Machines
Highlights:· CNC mitre cutting machines -45º/+60º· Machine prepared to work with HSS and carbide· Loading / unloading customised solutions
Max. cutting capacity
Max. drilling diameter
units CPI/T3CH
mm 1,500
mm 50
Sawing & Drilling lines
3D Plasma cuttingmachinesHighlights:· Possibility to cut round pipes· DSTV importer· Marking system
Max. cutting capacity
Max. cutting diameter
Plasma source
units RPD-T
mm 1200 x 600
mm 500
up to 600 Amp
C M Y CM MY CY CMY K
24
Horizontal Turning Centers
Swing over bed
Swing over saddle
Max. turning length
Max. main motor power
Max. chuck diameter
units TH/TCN
mm 600-1,100
mm 430-900
mm 7,000
kW 125
mm 250-1,000
Turning Machines
Vertical Turning Centers
Highlights:· Fixed or elevating crossrail· Live spindle or static tooling models· Two ram models for maximum metal removal· Automatic tool setting units· In process work gauging· Tool force monitoring and tool breakage detectionsystems
· Coolant through spindle· Direct linear measuring scales· Hydraulic counterweight for the vertical axis· Electric cabinet cooling systems
Max. turning diameter
Table diameter
Table drive motor
Ram dimensions
Live spindle power
ATC
units VTC
mm 1,600-6,000
mm 1,400-5,000
kW 60-80-100
mm 250x250-300x300
kW 17-22-37
no. 18-24-40-60-80
Highlights:· Slant bed· Ground & hardened steel guide ways· Ultraprecision headstock bearings· Automatic centralised lubrication· Optional “C” axis· Coolant through the tools
C M Y CM MY CY CMY K
Boring Mill Centers
25
Multi-purpose Floor type Boring Mill Center offer exceptional versatility and enhanced productivitybenefits. The SORALUCE “F series” meets the continuing demand of wind power market for higherreliability, greater efficiency and increased manufacturing output.
Highlights:· Design and manufacturing of Top Qualitymachining heads, being robust, flexible andreliable, focused on the Wind Power market
· Automatic head changing system forunattended machining process
· Robust machines with cast iron structuresto provide maximized rigidity
· Complete accessories to match the machineto the customer’s requirements:
- Adaptative control to improve the cuttingconditions
- Anti-collision system to protect themachine and the component
- A wide range of integrated rotary-travelling tables (loads / dimensions)
- Operators’ platforms with vertical andcross movement to allow the operatorto gain greater access to the workpiece
Longitudinal Travel
Vertical Travel
Cross Travel
Head Power
Automatic head changing
ATC
units Boring Mill Centers “F” series
mm 4,000 - 30,000
mm 2,100 - 6,500
mm 1,300 - 1,900
kW 30 - 46
Automatic / Orthogonal / Horizontal
no. 40 / 60 / 80 / 100 / 120Orthogonal head1ºx1º (1ºx0,001º) / 37 kW4,000 (6,000) rpm
Fixed horizontal head37 – 46 kW3,000 (4,000, 5,000, 6,000) rpm
Special head designed asper customer´s requirements
Automatic head changing system
- Pendulum working system for loading/unloading without interrupting the cycletime
- Splash guarding designed to thecustomer’s requirements
- High-pressure coolant through thespindle
· Other standard features to suit currentrequirements:
- Safety guarding in accordance with CEstandards
- Automatic centralized lubrication
- Direct linear measuring scales
- Rapid traverses up to 25 m/min
· Turn-key projects: clamping fixtures, cuttingtools, CAD-CAM processing, simulation,training, production launch support, etc.
C M Y CM MY CY CMY K
Grinding Machines
26
Highlights:
· Wheel head on a “B” axis
· Different wheel head configurations
· Absolute MDM measuring unit
· Various In-Process gaugingpossibilities
· Post process dimensional andgeometric report
· Very high flexibility
· One finished part in one clamping
Distance between centers
Swing over the table
Max. weight
Max. wheel size
Peripheral speed
mm 600 500-1,500 1,000-2,000 1,500-4,000 2,000-6,000
mm 350 450 450 650 1,050
kg 100 150 500 1,500 7,000
mm 600x150 760x250 508/610x150 915x300 1,060x150
m/s up to 100 50-60 45-60
units FG PG HG-62 HG-72 HG-92
Production GrindingMachines
C M Y CM MY CY CMY K
Vertical Grinding MachinesHighlights:
· Internal and external grinding with high frequency spindles
· "B" Axis:
- Automatic Tool changing
- Optional tangetial head
· Probing software
· Hard turning option
Max. diameter
Max. height
Swing
“B” axis
units VG
mm 1500
mm 500-1000
mm up to 1600
option
Internal Grinding MachinesHighlights:
· Radius grinding on “B” axis
· Turret with four spindles on “B” axis
· In process measuring and post process grinding &geometric report
Max. diameter
Max. height
Swing
“B” axis
units ID
mm 460
mm 300
mm up to 600
option
27
C M Y CM MY CY CMY K
DANOBATTel. +34 943 748044E-mail: [email protected]
DANOBAT-OVERBECKTel. +49 2772 801-0E-mail: [email protected]
SORALUCETel. +34 943 769076E-mail: [email protected]
BIMATEC SORALUCETel. +49 6431 97820E-mail: [email protected]
Arriaga Kalea, 2E-20870 Elgoibar (Spain)Tel. +34 943 748300Fax. +34 943 743674E-mail: [email protected]
Tel. +55 11 3082 9080E-mail: [email protected]
Tel. +86 10 64673639E-mail: [email protected]
Tel. +91 20 6609 4531E-mail: [email protected]