Machine Shop Equipment, Marine Equipment 10AM -...
Transcript of Machine Shop Equipment, Marine Equipment 10AM -...
PUBLIC AUCTIONNO MINIMUMS - NO RESERVES
James G. Murphy Co.Commercial & Industrial Auctioneers
1.800.426.3008 - 425.486.1246 - murphyauction.com
10AM - WEDNESDAY - JANUARY 8 Preview 8-10am, Wednesday, January 8
5555 N Channel Avenue, Portland, OR 97217
Bid live or bid online with MurphyLIVE!
Closing Machine Shop Only
Machine Shop Equipment, Marine Equipment
VIGOR
Poreba Type TR-135B
Summit 36 (2) 2000 Welin Lambie
NO MINIMUMS - NO RESERVES
Bid live or bid online with MurphyLIVE!
AUCTION STARTS 10AM SHARP WITH MAJOR EQUIPMENT
MACHINE SHOP EQUIPMENT & TOOLSPOREBA Type TR-135-B1/9M 53”x370” gap bed lathe w/5-
1/8” spindle hole, 5-500 rpm spindle speeds, dual rapid traverse carriages, 49” 4-jaw chuck, steady rests, tail stock, inch & metric threading, s/n: 1191-128
50”x373”lathe w/8’ outboard base extension, 178 rpm spindle speeds, carriage, 42” 4-jaw chuck, (2) 42” & (2) 20” 4-point steady rests, tail stock
SUMMIT 36”x200” gap bed lathe w/4-1/4” spindle hole, 10-1,000 rpm spindle speeds, rapid traverse carriage, 32” 4-jaw chuck, face plate, 20” 3-point steady rest, tail stock, taper attachment, s/n: H450H
MONARCH 20, 28”x72” lathe w/1-5/8 spindle hole, 24-1000 rpm spindle speeds, carriage, 3 & 4-jaw chucks, steady rest (located in building 9)
TARNOW Type TUJ50MX300M 22”x120” lathe w/3-1/2” spindle hole, 20-1600 pm spindle speeds, rapid traverse carriage, 3 & 4-jaw chucks, steady rest, tail stock, s/n: 518
MARTIN 20”x102” lathe w/2-1/2” spindle hole, 16-710 rpm spindle speeds, carriage, 4-jaw chuck, (2) steady rests, follow rest, tail stock, s/n: DLZ503-17665
HERCULES/AJAX/MAZAK 16”x60” lathe w/2” spindle hole, 39-1500 rpm spindle speeds, carriage, 3 & 4-jaw chucks, steady rest, tail stock, taper, s/n: 7480
MONARCH 12KK 14-1/2”x54” lathe w/1-3/4” spindle hole, carriage, 4-jaw & collect chucks, steady rest, tail stock, taper, s/n: 34314
TORRANT T-72/52 18”x48” lathe w/2” spindle hole, 38-2200 rpm spindle speeds, carriage, 3-jaw chuck, tail stock, fast brake, inch & metric threading, tail stock, s/n: 18500
NILES 5” horizontal boring mill w/NEWALL 3-axis digital read out controller, 68”x108” T-slot table w/120” longitudinal, 84” cross & 68” vertical travel, outboard support, 5-210 rpm main & 20-840 auxiliary spindle speeds, 20” facing head, angle plates, s/n: 21313
NILES 84” vertical boring mill, dual swivel ram heads, 58” under rail
CARLTON 6’ arm, 15” radial arm drill w/rapid traverse, power clamping, 15-500 rpm spindle speeds, tilting, compound & (2) T-slot boxes, T-slot base, s/n: 3A4386
ARCHDALE 4’ arm, 14” column radial arm drill, power travel, 32-800 rpm spindle speeds, T-slot base, s/n: MS1-11
MECHANICY Type FWA-41M universal milling machine w/powered overarm, 37-1/2-2360 rpm spindle speeds on vertical head, 1.3-1300 rpm spindle speeds on horizontal head, 16”x79” T-slot table, s/n: 9578
KEARNEY & TRECKER 205 S-12 horizontal milling machine, 30-2400 rpm spindle speeds, 10”x54” T-slot table, s/n: 35/9463
CINCINNATI No. 2M vertical milling machine w/BRIDGEPORT 1 hp head, 80-2720 rpm spindle speeds, 10”x52” T-slot table, s/n: E669L
MILWAUKEE H horizontal milling machine, 20-1000 rpm spindle speeds, universal 12”x64” T-slot table, s/n: 17-5345
WYSONG 1010FD mechanical shear, 10’ long x 10 gauge capacities, 36” power back gauge, 60” squaring arm, (3) front support arms, s/n: P32-811
DOALL 36” Metalmaster band saw w/DBW-15 blade welder
MORRISON K keyseater, s/n: K7529-04JT SHAFFER wheel press, 40” between rails, 130” OACDAKE 40-ton hydraulic pressGREENLEE single head spindle shaper(3) ESS ECOMAG 404, 400amp welding power sources
w/ESS DVK 300 wire feedersMILLER MP75E CV welding power sourceLINCOLN LT7 sub-arc welding tractorDAYTON 20” 9-speed drill press w/5/8” chuckElectric boring bar drive unitHydraulic boring bar drive unitRIDGID 300 pipe machine/bevelerCUSHMAN flatbed w/cab
AUCTION STARTS AT 10AM
Bid live or bid online with MurphyLIVE!
MARINE SUPPORT EQUIPMENT2000 AMBAR MARINE ALSAFE 550 aluminum multi-purpose fast
ocean rib boat, 18’6” length 106” beam, twin MERCURY MARINE 60 hp outboards, center console, self baling, 12 gallon fuel cell, fire suppression system, self inflatable emergency raft, 224” LOA, 203” inside length, 74” inside beam, 1,500 lbs dry weight, 1,900 lbs load capacity, boat stands, Hull ID#AM55032
(2) MASECO 48-person lifeboats, 26.0’ x 9.0’ beam, WESTERBEKE 4-107 4 cyl diesel, manual rudder
(2) 2000 WELIN LAMBIE Type PIV3.0 boat launch stations w/hydraulic over electric winch system, conditioning heaters, self contained units, SWT 3,000 kgs, STL 6,600 kgs
(2) MASECO HARKRADER type 35KMKFF electric cable winches, 7,500 lb drums, 3,750 lb load/fall, s/n’s:993L & 992L
2006 NYB A05663100 36 ACF fan, 26,000 cfm, 1297 pm, 27.4 bhpApprox. 10’ diameter sand tank w/standKEY ENGINEERING approx. 5’ diameter, 125 psi max sand blast pot(9) Approx 3’x5’x12’ concrete blocks w/lifting eyes(2) FIREGUARD 30”x30”x41” fire rated safe, 150 degree – 1 hour
TERMS & CONDITIONS
An On-Site Buyers Premium of 10% will be charged on all successful bids. An Online Buyers Premium of 13% will be charged on all successful bids. PAYMENT: Full payment must be made by the close of business, auction day.Cash, cashiers check, Master & Visa Cards, wire transfers only. Personal or
company checks accepted ONLY with bank letter of guarantee.Absentee bids accepted with 25% depositREMOVAL: No purchase may be removed during the auction unless otherwise
announced by the auctioneer. Removal schedule announced on auction day. Check our website, http://murphyauction.com/Auction/Details/540, for insurance requirements needed for bidders & subcontractors for removal.
Announcements made by the auctioneer at the time of sale take precedence over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
WARRANTY DISCLAIMER: ALL SALES ARE FINAL. All items are being sold As Is, Where Is, with all faults and without any warranties as to merchantability of fitness for a particular purpose. The principal, the auctioneer, the advertising coordinator, and any of their agents make no express or implied warranties of any type.
DRIVER DIRECTIONS
From north or southbound I-5, take the Alberta St/Swan Island exit (#303) to N Going St. Continue west on Going approximately 1 mile where going turns into N lagoon Avenue. Continue west on Lagoon approximately 1.2 miles to N Channel Ave.
WATCH FOR AUCTION PARKING & SHUTTLE SIGNS
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
NO MINIMUMS / NO RESERVES
Closing Machine Shop Only
James G. Murphy Co.Commercial & Industrial Auctioneers
PUBLIC AUCTION
James G. Murphy Co.Commercial & Industrial Auctioneers
P.O. Box 82160, Kenmore, WA 98028
PRESORTEDFIRST CLASS MAIL
U.S. POSTAGEPAID
SEATTLE, WAPERMIT NO. 963
Bid live or bid online with MurphyLIVE!
10am - Wednesday - Jan 8Preview 8-10am, Wednesday, January 8
5555 N Channel AvePortland, OR 97217
For more information go to murphyauction.com • Phone 425.486.1246
Machine Shop Equipment, Marine Equipment
VIGOR
2000 Ambar Marine
Martin 20x102
Wysong 1010FD
Niles 5”
Hercules Ajax 16x60