Mac Weld Threaded

1
THERMDWELLS THREADED PROCESS MATERIAL STYLE TWOl BORE A 12 M STEM LENGTH 09 OPTIONS 1/2" NPT 1/2" NPT 1/2" NPT ----------'u'--------- 1+----2.50-------+1 ------------'L'---------------+I STYLE TW01 - Stepped TW02 - Straight TW03 - Tapered TW11 - Lag Stepped TW12 - Lag Straight TW13 - Lag Tapered BORE A- 0.260 B - 0.385 C - 0.515 D - 0.203" E - 0.375 F- 0.390 K- 0.702" X-SPECIAL PROCESS 'P' 08 - 1/2" NPT 12 - 3/4" NPT 16 - 1" NPT 20 - 1 1/4" NPT 24 - 1 1/2" NPT MATERIAL A- Brass D- Carbon Steel E -A105 F- F11 H - 304 J- 304/L L - 316 M - 316/L R- Monel T - Titanium U- Hast. C STEM LENGTH 02 - L = 2 1/2" U = 1 5/8" 04 - L = 4" U = 2 1/2" 06 - L = 6" U = 4 1/2" 7.5 - L = 7 1/2" U = 6" 09 - L = 9" U = 7 1/2" 12- L= 12" U = 10 1/2" MACHINING LTD. Root Diameter (B) Process Connection Stepped Straight Tapered 1/2" NPT 5/8" 5/8" N/A 3/4" NPT 3/4" 3/4" 7/8" 1" NPT 7/8" 3/4" 1 1/16" " Large or Special bores will change stem outside diameter '324 Lougar Ave, Sarnia, Ontario N7SSN7 Toll Free : 1-877 -MAC -WELD (622-9353) Telephone: 519 -332 -1388 Fa x: 519 -332 -3280 www.MAC-WELD.com tnfo samec -weld .ccm

description

BROCHURE

Transcript of Mac Weld Threaded

Page 1: Mac Weld Threaded

THERMDWELLSTHREADED

PROCESS MATERIALSTYLE

TWOl

BORE

A 1 2 M

STEM

LENGTH

09

OPTIONS

1/2" NPT

1/2" NPT

1/2" NPT

----------'u'---------1+----2.50-------+1

------------'L'---------------+I

STYLETW01 - SteppedTW02 - StraightTW03 - TaperedTW11 - Lag SteppedTW12 - Lag StraightTW13 - Lag Tapered

BOREA- 0.260B - 0.385C - 0.515D - 0.203"E - 0.375F - 0.390K - 0.702"X-SPECIAL

PROCESS 'P'08 - 1/2" NPT12 - 3/4" NPT16 - 1" NPT20 - 1 1/4" NPT24 - 1 1/2" NPT

MATERIALA- BrassD - Carbon SteelE -A105F - F11H - 304J - 304/LL - 316M - 316/LR- MonelT - TitaniumU - Hast. C

STEM LENGTH02 - L = 2 1/2" U = 1 5/8"04 - L = 4" U = 2 1/2"06 - L = 6" U = 4 1/2"7.5 - L = 7 1/2" U = 6"09 - L = 9" U = 7 1/2"12- L= 12" U = 10 1/2"

MACHINING LTD.

Root Diameter (B)

Process Connection Stepped Straight Tapered1/2" NPT 5/8" 5/8" N/A3/4" NPT 3/4" 3/4" 7/8"

1" NPT 7/8" 3/4" 1 1/16"

" Large or Special bores will change stem outsidediameter

'324 Lougar Ave, Sarnia, Ontario N7S SN7Toll Free : 1-877 -MAC -WELD (622-9353)Telephone: 519 -332 -1388Fax: 519 -332 -3280

www.MAC-WELD.comtnfo samec-weld .ccm

2/2-way Angle Seat Control Valve, threaded and weld end connections… · 2011-10-19 · 2/2-way Angle Seat Control Valve, threaded and weld end connections, 1/2” – 2” The 2702

2/2-way Angle Seat Control Valve, threaded and weld end connections… · 2011-10-19 · 2/2-way Angle Seat Control Valve, threaded and weld end connections, 1/2” – 2” The 2702

USITCQUESTIONNAIRE€¦  · Web viewForged steel fittings are covered regardless of end finish, whether threaded, socket-weld or other end connections. The scope includes integrally

USITCQUESTIONNAIRE€¦  · Web viewForged steel fittings are covered regardless of end finish, whether threaded, socket-weld or other end connections. The scope includes integrally

HIGH PERFORMANCE BALL VALVE 80-89-70-74... · 2015-02-18 · with BS 6364 and wall thickness complying to ASME B16.34. A variety of ends; threaded, socket weld, butt-weld, tube end,

HIGH PERFORMANCE BALL VALVE 80-89-70-74... · 2015-02-18 · with BS 6364 and wall thickness complying to ASME B16.34. A variety of ends; threaded, socket weld, butt-weld, tube end,

ASME B16.5 FlangesASME B16.5 Flanges Weld Neck, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges are

ASME B16.5 FlangesASME B16.5 Flanges Weld Neck, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges are

TC-YS VALVE - Ta Chen · 29 TC-YS VALVE 800 WOG Y STRAINER, THREADED, SOCKET-WELD MATERIALS LIST DIMENSIONS Body:ASTMA351Gr.CF8M Screen:SS316 Packing:PTFE WorkingPressure:800psi

TC-YS VALVE - Ta Chen · 29 TC-YS VALVE 800 WOG Y STRAINER, THREADED, SOCKET-WELD MATERIALS LIST DIMENSIONS Body:ASTMA351Gr.CF8M Screen:SS316 Packing:PTFE WorkingPressure:800psi

EFFECTIVE MARCH 22, 2021 - Merit Brassmeritbrass.com/PricingPdfs/StainlessSteel150lbFittings... · 2021. 3. 5. · TYPE 304 THREADED & SOCKET 150LB. CAST FITTINGS WELD STAINLESS STEEL

EFFECTIVE MARCH 22, 2021 - Merit Brassmeritbrass.com/PricingPdfs/StainlessSteel150lbFittings... · 2021. 3. 5. · TYPE 304 THREADED & SOCKET 150LB. CAST FITTINGS WELD STAINLESS STEEL

FULL PORT 1/4 650 - Superiorvalves FORGED CHECK... · 2500 Ball Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends 34 L2550

FULL PORT 1/4 650 - Superiorvalves FORGED CHECK... · 2500 Ball Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends 34 L2550

THREADED ROD THREADED ROD THREADED ROD & ACCESSORIES

THREADED ROD THREADED ROD THREADED ROD & ACCESSORIES

jamesbur Threaded End – Socket4000 BALL VALVES Threaded End – Socket Weld – Butt Weld jamesbur y B ulletin B105-1EN I ssue 6/2004 Non Fire-Tite Valves Non Fire-Tite valves are

jamesbur Threaded End – Socket4000 BALL VALVES Threaded End – Socket Weld – Butt Weld jamesbur y B ulletin B105-1EN I ssue 6/2004 Non Fire-Tite Valves Non Fire-Tite valves are

THREADED, WELD-IN, & SOCKET WELD · PDF fileTHREADED, WELD-IN, & SOCKET WELD THERMOWELLS #6 SENSOR LENGTH NO LAG WITH LAG STANDARD ... The new ASME PTC 19.3 TW standard addresses wake

THREADED, WELD-IN, & SOCKET WELD · PDF fileTHREADED, WELD-IN, & SOCKET WELD THERMOWELLS #6 SENSOR LENGTH NO LAG WITH LAG STANDARD ... The new ASME PTC 19.3 TW standard addresses wake

proditec.clproditec.cl/images/Valvulas_de_Retencion_Forjadas.pdf · Fig. 38S-FS2 Class 800 (Socket weld) Fig. 38T-FS2 Class 800 (Threaded) CLASS 800 DIMENSIONS Y PATTERN — WELDED

proditec.clproditec.cl/images/Valvulas_de_Retencion_Forjadas.pdf · Fig. 38S-FS2 Class 800 (Socket weld) Fig. 38T-FS2 Class 800 (Threaded) CLASS 800 DIMENSIONS Y PATTERN — WELDED

PIF GAS SERVICING SYSTEMS (SECTION –B) Page | 58 · 2019. 1. 17. · VP03 15NB 400 PN420 2 way Reduced bore Threaded Vent NIL All threaded valves shall be of but weld union type

PIF GAS SERVICING SYSTEMS (SECTION –B) Page | 58 · 2019. 1. 17. · VP03 15NB 400 PN420 2 way Reduced bore Threaded Vent NIL All threaded valves shall be of but weld union type

Gap Control for Socket Weld Back Welded Threaded Fittings

Gap Control for Socket Weld Back Welded Threaded Fittings

q FIGURE 2126: Socket-Weld Union - Amazon S3 · (Class 6000 by method of MSS SP83) A D E F C B Socket-Weld A C Threaded D. FE STEE FTTNS PF-11.16 Standards and Specifications Dimensions

q FIGURE 2126: Socket-Weld Union - Amazon S3 · (Class 6000 by method of MSS SP83) A D E F C B Socket-Weld A C Threaded D. FE STEE FTTNS PF-11.16 Standards and Specifications Dimensions

THREADED INSERTS - Jergens · PDF file51 THREADED INSERTS THREADED INSERTS Threaded Inserts Bolster Plate Bushings..... 55 Installation and Removal

THREADED INSERTS - Jergens · PDF file51 THREADED INSERTS THREADED INSERTS Threaded Inserts Bolster Plate Bushings..... 55 Installation and Removal

ANSI Flanges - pipefittingweb.com · ANSI Flanges Tel: 886-4-23112576 Fax: 886-4-23112578 E-mail: wellgrow@ms18.hinet.net WELD NECK THREADED LAP JOINT BLIND SLIP-ON SOCKET WELD

ANSI Flanges - pipefittingweb.com · ANSI Flanges Tel: 886-4-23112576 Fax: 886-4-23112578 E-mail: [email protected] WELD NECK THREADED LAP JOINT BLIND SLIP-ON SOCKET WELD

NS SerieS Ball & Butterfly ValvesNS Series ball valves are available with threaded, socket weld, butt weld, Class 150, and Class 300 end connections. NS Series Valves Certified NSF

NS SerieS Ball & Butterfly ValvesNS Series ball valves are available with threaded, socket weld, butt weld, Class 150, and Class 300 end connections. NS Series Valves Certified NSF

Jamesbury 3-Piece Ball Valves Series 4000 Threaded End, Socket … · 2018. 1. 2. · Jamesbury 3-Piece Ball Valves, Series 4000, Threaded End, Socket Weld, Butt Weld, Rev 2.0, Safety

Jamesbury 3-Piece Ball Valves Series 4000 Threaded End, Socket … · 2018. 1. 2. · Jamesbury 3-Piece Ball Valves, Series 4000, Threaded End, Socket Weld, Butt Weld, Rev 2.0, Safety

Diamond Flanges & Fittings Pvt. Ltd. · ANSI B16.5 Class 150 Forged Flanges Weld Neck Threaded Slip- On Lap Joint Socket Weld Blind Nom. Pipe Size OT 1 RX No. 2/Dia. of Holes Bolt

Diamond Flanges & Fittings Pvt. Ltd. · ANSI B16.5 Class 150 Forged Flanges Weld Neck Threaded Slip- On Lap Joint Socket Weld Blind Nom. Pipe Size OT 1 RX No. 2/Dia. of Holes Bolt

TAYLOR STUDWELDING SYSTEMS LIMITED - Weld Studs, Guns … · weld studs for hand and automatic feed must conform to bs en iso 13918 for threaded, unthreaded and internal threaded

TAYLOR STUDWELDING SYSTEMS LIMITED - Weld Studs, Guns … · weld studs for hand and automatic feed must conform to bs en iso 13918 for threaded, unthreaded and internal threaded