Mac OS X 10
description
Transcript of Mac OS X 10
Mac OS X 10.6.2 Patched for PC UNIVERSALhttp://thepiratebay.org/torrent/5269611
ATTN: Before you email me asking for assistance, please help me help you. Download Everest Ultimate Edition (TPB Torrent) and attach a html report containing all hardware related pages to me with the email so I can easily provide assistance. Edit names out of the report if wanted
╔─────────────────────────────────────────────────────────────────────────────────╗│ Mac OS X for PC ││ 10.6.2 x64 Edition (x32 compatible) │╚─────────────────────────────────────────────────────────────────────────────────╝╔═════════════════════════════════════════════════════════════════════════════════╗║▓▓▓▓▓▒░ Torrent Info ░▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓║╠═════════════════════════════════════════════════════════════════════════════════╣║ ║║ •Torrent Size: 6.01 GB ║║ →SnowOSXUniFlash1.0.img 6.00 GB ║║ USB Image Tool.lnk 1.27 KB ║║ usbit.zip 225 KB ║║ USB ItUSB Image tool.exe 4.00 KB ║║ USB Itusbit32.dll 4.00 KB ║║ USB Itusbitcmd.exe 4.00 KB ║║ USB ItUSB Image Tool.exe 134 KB ║║ USB Itusbit32.txt 3.32 KB ║║ •Uploaded by cclloyd ║║ →http://thepiratebay.org/cclloyd ║║ ║║ •Reported Good/Bad (via email and torrent rating) ║║ →0/0 ║║ ║╚═════════════════════════════════════════════════════════════════════════════════╝╔═════════════════════════════════════════════════════════════════════════════════╗║▓▓▓▓▓▒░ OS X Info ░▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓║╠═════════════════════════════════════════════════════════════════════════════════╣║ ║║ •Mac OS X Snow Leopard 10.6.2 ║║ →Has all the features of the original ║║ →Ability to update if they come out UNLESS OTHERWISE WARNED! ║║ •System Requirments ║║ →1GB DDR2 RAM (2GB for x64) ║║ →1024x768 monitor/compatible graphics card ║║ →8 GB Disk space (HFS+ format [able to do in installer]) ║║ →USB 2.0 Bus ║║ →AirPort (for wireless internet, only if desired) ║║ →1 GHz AMD or Intel Proccessor with instruction sets SSE2 and/or PPF ║║ ║╚═════════════════════════════════════════════════════════════════════════════════╝╔═════════════════════════════════════════════════════════════════════════════════╗║▓▓▓▓▓▒░ Other Info ░▒▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓║╠═════════════════════════════════════════════════════════════════════════════════╣║ ║║ •Questions or comments ║║ →Contact me at cclloyd9786 @ gmailcom ║║ →Leave a comment regarding installation failures and successes, or with ║║ questions that I will reply to, or others if they can help. ║║ Instructional Video: ║║ video code dEE84N-mFCI ║ ║ ║║ ║║ •Dual boot with Vista/7 (Can't dual boot with XP or older. Google instructions ║║ for linux. ║║ →With installing mac first: ║║ »Boot up to the installer (or to your mac if you have another version install-║║ ed) and open Disk Utility under Utilities. ║║ »Create a new partition if you plan on installing it on the same drive, and ║
║ format it to HFS+ (Mac OS X Extended (Journaled)). (Also do with full drive ║║ if you plan on installing OS X only on the drive) ║║ »Then if you need to apply the DSDT patch in the installation (you will see ║║ as you go) ║║ »Install OS X. MAKE SURE YOU CHOOSE CUSTOMIZE BEFORE THE INSTALL! ║║ »If you installed the bootloader that is by defualt chosen during the install ║║ then you do not need to do the dual boot steps of Windows. ║║ »Now after you have it installed and everything, boot into Windows, and ║║ install as normal. (If you cant boot into your mac, then use Windows Disk- ║║ part to set your mad partition or drive as active. ║║ →With Windows installed first: ║║ »Create a partition in Windows at least 8GB in size and set it to active ║║ »Use USBit to make your USB the installer. ║║ »Boot into your USB and open disk utility. Format your mac partition to HFS+ ║║ »Apply the DSDT patch if neccessary. ║║ »Go through the install REMEMBERING TO CUSTOMIZE YOUR INSTALLATION. ║║ »After installed, and have your OSx86 setup, open disk utulity again and set ║║ the Windows partition to active (If you Don't want to use the Mac bootloader ║║ which i suggest you use) ║║ »After booting into Windows, download and install EasyBCD (Google is your ║║ friend) and add a new entry. ║║ »Choose 'Generic x86 PC' for the mac and DONT CHANGE THE NAME ║║ »Then save changes. Now when you boot up, it will let you choose which to ║║ boot into. ║║ →If you don't understand anything, google it or ask me. Or go to OSx86.com. ║║ THEY ALSO HAVE A FULL LIST OF COMPLETELY COMPATIBLE HARDWARE! ║║ •If you cant boot because you have a x32 PC, then use the bootflags ║║ -v -x32 ║║ If you load a few kernals then your screen flashes white and goes black use ║║ voodoo -v -x32 ║║ ║╚═════════════════════════════════════════════════════════════════════════════════╝
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓ ▓▓ ▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓ ▓▓▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓ ▓ ▓ ▓ ▓▓▓▓ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓ ▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓ ▓ ▓ ▓▓▓▓ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓ ▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓ ▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓ ▓▓▓▓▓▓ ▓▓▓▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓ ▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓▓▓▓▓ ▓▓▓▓▓▓▓▓▓
Scarica questo Torrent (magnet link)
Commenti
drklevl at 2010-01-09 02:10 CET:
thank you !!!!
AronMosh7 at 2010-01-09 02:13 CET:
Thank you so much even though i am not a big mac fan, i will try this on virtual pc on windows 7 to see how it goes
cclloyd at 2010-01-09 02:17 CET:
It will not work on a virtual environment unless you run it from a mac, or from osx on your PC.
AronMosh7 at 2010-01-09 02:53 CET:
oh, that sucks
zaibazu at 2010-01-09 03:29 CET:
So is this release only for use with a USB stick or can it somehow be put on a DVD ?
cclloyd at 2010-01-09 05:39 CET:
You can use it on a DVD if it has the capacity (at least 6.5 GB)
a.skiller at 2010-01-09 07:59 CET:
can i use an external hardisk to install it
rasputin2010 at 2010-01-09 08:34 CET:
Thanks a lot cclloyd.been waiting for this for months,gr8 app&gr8 description.Thump up ; )
meroonberet at 2010-01-09 13:23 CET:
nobody seed
walicTO at 2010-01-09 14:19 CET:
Hey cclloyd I have a computer 64 bit ;...QuadCore Intel Core 2 Quad Q9300, 2500 MHz (7.5 x 333)..........Acer MCP73PV ......Chipset; NIVIDA GForce 7100 ......(Northbridge) nVIDIA nForce 7100-630i (MCP73PV) ...... Realtek ALC888/1200 @ nVIDIA MCP73 - High Definition Audio Controller PCI ...... NVIDIA GeForce GT 1201024 mb DDR2.......DYSK ST310005 28AS SCSI Disk Device Seagate-Interfejs SATA-II- 1000GB.Can I install it on this computer ?
trin02 at 2010-01-09 18:00 CET:
walicTO: Yes, you can install it in your ACER computer. Remember this for 1 GHz AMD or Intel Proccessor.
Read the System Requirements above.
cclloyd at 2010-01-09 18:28 CET:
@askiller
You just have to partition it to 32 GB or less, and format it to fat32.
@walictwo
Yes your specs seem capable. Although i am unsure if they will be fully functional like i was on one computer. Go to OSx86 to see a full list of fully compatible software.
rasputin2010 at 2010-01-09 18:39 CET:
Hey guys.after installing............remember to seed.sharing IS caring.
walicTO at 2010-01-09 18:40 CET:
trin02 ,cclloyd thanks guys :)
Pfyber at 2010-01-09 19:06 CET:
HI. Will it work if I burn it on 2 layer DVD?
spyserve at 2010-01-09 19:06 CET:
Hi cclloyd, you've said this iso is not bootable under vmware, but how could it be under usual way ? I mean vmware simule the same boot process as a real machine ... its strange !
And what is the difference with the release : "Mac Os X Snow Leopard Universal 10.6 v3.5"
Because this release dont work for me and im afraid it will the same with your release ...
Boot --> Darwin x86 "Press any key to boot ..." --> then reboot and so on (in loop) ....
cclloyd at 2010-01-09 20:12 CET:
That happened to me when coding. Thats why if it doesnt work after installing, use the boot flags
amd_kernel -v -x32
no matter what system specs you have it should boot up.
It cant be used under VMWare because when you boot up, it uses areas of your proccessor that are unaccessable and unrecognizable by windows. You can do it though once you use it from a mac.
And yes you can burn it to a 2 layer DVD as long as it is on 1 side (not double sided DVD) UNLESS you have a dual sided DVD drive where it can read the other side without having to flip it.
Pfyber at 2010-01-10 10:11 CET:
Ok thanks... do I have to use rebel EFI or something.. or just regular boot?
spyserve at 2010-01-10 16:49 CET:
Ok thanks, iam burning it, i have created a new partition (ntfs) ... and now what iam supposed to do ? I reboot on the dvd, and after how can i convert my partition into HFS+ ? Because you cant have disk utility without the USB or is it include in the DVD ?
THks
spyserve at 2010-01-10 16:59 CET:
I have boot on the DVD and i got this message : Operating System not found ... :(((
dotuletz2 at 2010-01-10 17:39 CET:
one seed ? :(
spyserve at 2010-01-10 17:46 CET:
I guess this version (uniFlash) is optimised to boot on a usb flash disk only and not from a dvd ...
Anyone can tell if that work with usb key ?
cclloyd at 2010-01-10 18:29 CET:
I guess thats why. When you format your USB with the files inside this, it auto formats to HFSJ. If you could do that with a CD, then it would work, in theory.
And one last thing, make sure you choose device mode on USB IT when putting this on your USB.
walicTO at 2010-01-10 18:41 CET:
cclloyd might be better if you give a link to the tutorial?
findermix at 2010-01-10 20:46 CET:
Tip:There are so many problems it is better to install Windows 7 or better to buy a Mac ---------------------------
DVD Decrypter
---------------------------
Operation Successfully Completed!
---------------------------
OK
biatchslapper at 2010-01-13 15:12 CET:
There's no way disk utilities to find my new created partition. I shrinked C: and now i have 20gb new partition, it's active, but in mac os installation trough the usb stick, disk utilities can't find the partition, can't find anything than the usb stick. What should i do? My partition is NTFS, does this matters?
biatchslapper at 2010-01-13 22:36 CET:
Ok i installed it but how to fix sound and video and mac os x can't detect my internet connection.
cclloyd at 2010-01-14 02:29 CET:
As i said, it will install, but might not be fully functional. If you want you need to search for a driver for 10.6.2 which are very limited. Most of them are on OSx86 dot com
Azure.Sky at 2010-01-14 03:32 CET:
I booted it up and typed in -v but...
I got stuck at, "Startup in nanoseconds: random large #"
night.afg at 2010-01-14 07:47 CET:
What modifications did you do from the original snow leopard installer? thanks
maffiakillen at 2010-01-14 12:11 CET:
Every windows guys... if you want to see your volume och make volume type "diskmgmt.msc" in run commantask,
maffiakillen at 2010-01-14 12:16 CET:
This will work with desktops but not so well with laptops.... unfortunaly... you can install and use but not get all the feature... Here is a link for wich motherboard it will work, grapihic card and sound, and ethernet, and wirelss for this patch
http://wiki.osx86project.org/wiki/index.php/HCL_10.6.2
Anathemae at 2010-01-15 06:12 CET:
When I try to boot the USB it runs for a few lines and then? halts, the last few lines are something like Extension "com.apple.driver.ACPI_SMC_Pla
tformPlugin" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style. I've tried booting with -x -v, -v -f -x,
-v -f -s, cpus=1 -x -v, cpus=1 -v -f -x, but it still halts at the same point. I've looked everywhere for a solution but I cannot find one.
unchi at 2010-01-15 13:44 CET:
Hey. When can we get the AMD version? I almost waited for one month. Thanks.
thethingy at 2010-01-15 19:14 CET:
HEY, unchi, this is it, try reading the description.
This one works on toshiba satellite pro psa family for any one who has one.
unchi at 2010-01-15 21:25 CET:
Why don't you create DVD version not like this one? Please release DVD version. Thanks.
happyguru at 2010-01-16 08:10 CET:
@ cclloyd
ok i got question i was not able to install ur pervious version of snow leopard. it not that my pc dont support mac, i am running mac os x.5.8 but it takes like
6 mins to open. so can i install this one sucessfully?
1 2 3
HCL 10.6.2/Desktops
From OSx86Jump to: navigation, search
.
GA-P35-DS4 Intel P35 Express
* Install method: Vanilla Mac OS 10.6.0 + 10.6.2 combo update. * Boot loader: Chameleon 2.0-RC3. * EFI environment: PC EFI 10.5 with patch for Core i5/i7. * BIOS version: F14. * PCB revision: 2.1. * Audio: Realtek ALC889a codec, not yet working. * LAN: Realtek 8169, OK working * SATA: OK with SATA ports set to AHCI. Gigabyte ports require JMicronATA.kext. * IDE: Not tested. * Optical Drive: OK (OOB). pioneer 216XL. * Shutdown/restart: OK, with OpenHaltReStart.kext. * Sleep: OK, requires DSDT patch. * Other kexts: fakesmc.kext, PlatformUUID.kext.
Yes, vanilla. No, kexts and DSDT patches required for shutdown/restart, sleep, LAN and audio. .
HCL 10.6.2
From OSx86Jump to: navigation, search
Mac OS X 10.6.2 Hardware Compatibility
Portable Computers
Desktop Computers
Hardware Components This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work. Please add hardware into tables.
This is for 10.6.2 builds only.
For how to edit the Wiki, please see this thread. Thank you!
You're looking for an Installation guide? see here Contents[hide]
1 Motherboards o 1.1 Asrock
o 1.2 Asus
o 1.3 Gigabyte
o 1.4 XFX
o 1.5 MSI
o 1.6 Shuttle
2 Graphics Cards
o 2.1 AGP
2.1.1 NVIDIA
o 2.2 PCI Express
2.2.1 NVIDIA
2.2.2 ATI
3 Network Cards
o 3.1 Wireless
4 Audio Devices
o 4.1 FireWire/1394
o 4.2 USB 2.0
[edit] Motherboards
[edit] Asrock
Hardware Name
Chipset Notes EFI/kernel working Fully Working
w/o Patch
P4i65G 865G, ICH5
Installation method: Installed using 10.6 retail DVD from existing Leopard partition + 10.6.2 Combo Update.
CPU: Pentium 4 Prescott 2.8Ghz no HT, used newest 10.2 "legacy_kernel"
SATA: Works with AppleIntelPIIATA.kext patched for ICH5
IDE: Works with AppleIntelPIIATA.kext patched for ICH5
LAN: Needs PCGenRTL8139 kext
Audio: Needs AppleAC97Audio kext. I used an old maxxuss one
PC_EFI 10.5 with DSDT, only tested 32 bit
No
USB: Works
Onboard video: No QE/CI
Shutdown/Restart/Sleep: Working with OpenHaltRestart.kext for now. Board doesn't fully support S3 (fans stay on).
Disabler.kext with two other kexts besides the thermal one disabled. Sorry, can't check which ones right now.
[edit] Asus
INTEL CPU
Hardware Name
Chipset Notes EFI/kernel working
Fully Working w/o Patch
P5E Intel (R) X38 + ICH9R
Intel E8400 CPU @ 4 Ghz
Followed this guide to install from memory stick option Install Guide -
DSDT and Kexts Used (10.6 and 10.6.1): Here replace with these KEXTS to install 10.6.2 combo updater LATER (works 64 and 32bit Kernel)
Bootloader: Boot Think v2.3 or Chameleon-2.0-RC2-r640
SMBIOS.plist
AD1988bFix
fakesmc
NullCPUPowerManagement
IOAHCIBlockStorageInjector
OpenHaltRestart
PlatformUUID
SleepEnabler
LegacyAppleYukon2
VGA: 8800 GTX (OK) with EFI String.
Yes Shutdown, Restart & Sleep OK!!!!! ((2ºjazz))
P5B-V, P965, ICH8, JMicron JMB363
Installation method: my custom BootCD + Retail 10.6 + Combo Update
G695 works OOTB
ICH8, JMicron - works: Legacy kexts
SATA Devices - works, IDE Devices - unknown
Chameleon 2 RC3, Vanilla kernel 32-bit & 64-bit
No. Onboard GPU doesn't work.
LAN: Marvell 88E8001 - skge.kext
Audio: AD1988A - works: VoodooHDA.
USB - works: fully with patch or Chameleon's USB FIX option.
Onboard GPU: GMA X3000 - not working (only VESA)
ShutDown,Restart,Sleep: works with EvOreboot.kext & SleepEnabler.kext (need to fix USB first)
P5Q3 P45, ICH10
Installation method: Installed using 10.6 retail DVD from existing Leopard partition + 10.6.2 Combo Update.
SATA: Works
IDE: untested
JMicron: untested
LAN: Realtek 8111C. Works OOTB
Audio: Realtek ALC1200. Works using modified AppleHDA.kext from this thread.[1], installed via KextHelper. VoodooHDA also works, but not consistently (garbled sound after waking from sleep).
USB : Works OOTB
Firewire 400: Works OOTB
ShutDown,Restart,Sleep: Shutdown and restart work. Sleep works with SleepEnabler.kext
PlatformUUID.kext is required for Time Machine to function [2].
Works fine using Chameleon 2 RC3 installer from this thread [3], Vanilla kernel 32-bit & 64-bit
No. Kexts required for Audio, and sleep functionality.
P5Q Premium
P45, ICH10R
Installation method: Installed using SnowOSX Universal v3.6.
SATA: Works
IDE: untested
LAN: Marvell 88E8056. Works after manual installing LegacyYukon2.kext (ATools from same disk)
Audio: untested
USB : Works OOTB
Works fine using Chameleon 2 RC3 bootloader located on same disk
No. BIOS flashing required, see http://www.applelife.ru/topic/9948-p5q-pro/page__st__1400 . Kext installation required for LAN.
Firewire 400: untested
ShutDown,Restart,Sleep: Works OOTB.
P5GC-MX/1333
Intel 945GC/Z / Intel P45 + ICH10R
Intel E7500 CPU 2.93GHz / FSB 1066 MHz / 4GB RAM DDR2
Hazard's Snow Leopard Distro 10.6.1 - 10.6.2
S-ATA: [OOB] /*Out Of the Box*/
Audio: [OOB] (With this SL distro) /*Out Of the Box*/
USB: [OOB] /*Out Of the Box*/
Ethernet: [NWY](Looking for drivers) /*Not Working Yet*/
WLAN: D-Link DWL-G122 Rev. B1 with Prasys RT2500 USB drivers
VGA: [NTY] /*Not Tested Yet*/
PCIe: XFX GeForce 9500GT 512MB DDR3 working 100% QE/CI Enabled (With this SL distro)
Sleep, Shutdown, and Reboot working 100% after moving USB|PS/2 5v Power Jumper on motherboard & disabling Legacy USB.
Yes Almost
AMD CPU
Hardware Name
Chipset Notes EFI/kernel working Fully Working w/o Patch
M2N-E nForce 570
Used [Intel/AMD] Snow Leopard 10.6.1-10.6.2 SSE2-SSE3 Intel/AMD by Hazard
Installation method: from Mac Os X 10.5.8 on separate HDD
CPU: AMD Athlon64 x2 4600+, used newest 10.2 "legacy_kernel"
SATA: Works with IOATAFamily_SATA_Fix.kext
IDE: Works with IOATAFamily_Fix.kext
LAN: Works
Audio: Needs AppleAzalia and HDAEnabler kexts. Which one works I don't know, but it works.
USB: Works
only tested 32 bit yes
Video: nVidia 7300GT works with NVEnabler
Additional choose AMD and dont choose bootloader
CMOS: LegacyAppleRTC
M2N68-LA nForce 430
Installation method: from plain iPC Mac OS X 10.5.6 on separate HDD, using 10.6.0 retail [4] and installing delta upgrade
CPU: AMD Athlon64 x2 5200+, used modbin's test7 kernel (10.6.0, be sure to replace after 10.6.2 upgrade)
SATA/IDE: Works using Slashhack's AppleNForceATA kext (stable with 4+GB RAM)
Optical: Only works with MeDevil's AppleNForceATA 32-bit kext (must limit to 2GB RAM)
LAN: nForceLAN kext
Audio: Analog & Digital work using marionez's ALC1200 Snow Leopard Driver [5])
USB: Works
Video: Onboard video won't work with QE/CI. Added PCIe GeForce 8400 w/ EFI String (OSx86Tools) in boot plist to get QE/CI.
Note: This is on a HP m8000n
Yes, Chameleon 2 (RC4 w/ rekursor patch), modbin test7 kernel, 32&64-bit
Followed these instructions for initial Snow Leopard install, patched audio driver, modbin kernel, onboard GPU has no QE/CI support.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[edit] Gigabyte
Hardware Name
Chipset Notes EFI/kernel working
Fully Working w/o Patch
GA-EX58-UD5
Intel X58
Install method: X58 Mobo Patch Installer + Retail 10.6 DVD + Apple Softwareupdate to 10.6.2
Second Mac / Hackintosh / Harddrive with OSX already installed required
Boot loader: Chameleon RC4
BIOS version: F9E
Audio: working
LAN: both Ports working
Optical Drive: working, any SATA optical drive (64/32-bit).
Shutdown/restart: Working without any problems
Sleep: working, using sleepenabler.kext for 10.6.2 (after updating via softwareupdate)
Other kexts: everything necessary automatically installed by script, so it's quite simple
Apple Softwareupdate: All updates working without any problems so far (13.01.2010)
Guide: http://www.insanelymac.com/forum/index.php?showtopic=149505 (not my work, kudos to digital_dreamer)
Yes, vanilla.
No, but almost everything required is automatically installed by script
GA Intel
Install method: Legacyboot cd ud4p + Mac OS 10.6.0 + 10.6.2 combo update.
Boot loader: Gigabyte boot
EFI environment: PC EFI 10.5.
BIOS version: F2.
PCB revision: 1.0.
Audio: Realtek ALC889a codec, working (64/32-bit).
LAN: Realtek 8111D, working at only 100mbit speeds with driver in /System/Library/Extensions: Realtek R1000 (64/32-bit).
SATA 3 gb/s: ICH10R, working with SATA ports set to AHCI (64/32-bit). Gigabyte ports (8, 9) require JMicronATA.kext (64/32-bit).
SATA 6 gb/s: not working.
IDE: not working.
USB 3.0: not working.
Optical Drive: working, any SATA optical drive (64/32-bit).
Shutdown/restart: working, with OpenHalRestart.kext (64/32-bit).
Sleep: working, requires DSDT patch (64/32-bit).
Other kexts: fakesmc.kext, PlatformUUID.kext (64/32-bit).
GA-G33M-DS2R
Intel G33
Install method: Activate AHCI, use Rebel EFI cd bootloader and vanilla Mac OS 10.6.0 DVD, apply vanilla 10.6.2 software update
Boot loader: Chameleon 2.0-RC4
EFI environment: PC EFI 10.5
BIOS version: F9A (reduce AHCI initialization time)
Audio: Realtek ALC889a codec, works with DSDT patch and LegacyHDA.kext and HDAEnabler.kext in /Extra folder, see 889a thread
LAN: Works out of the box
SATA : Works out of the box in AHCI
IDE: Unknow
USB 2.0: Works out of the box
Onboard graphic controller: Works without acceleration, ATI or NVIDIA need DSDT patch.
Optical Drive: SATA optical drive Works out of the box
Shutdown/restart: Works with OpenHalRestart.kext
Sleep: not working
DS2R 10.6.2 install guide .
Yes, vanilla.
No, kexts and DSDT patches required for shutdown/restart, sleep, audio.
GA-EX58A-UD7
Intel X58 Express
Install method: Vanilla Mac OS 10.6.0 + 10.6.2 combo update.
Boot loader: Chameleon 2.0-RC3.
EFI environment: PC EFI 10.5.
BIOS version: F2.
PCB revision: 1.0.
Audio: Realtek ALC889 codec, working (64/32-bit).
LAN: Realtek 8111D, working at only 100mbit speeds with driver in /System/Library/Extensions: Realtek R1000 (64/32-bit).
SATA 3 gb/s: ICH10R, working with SATA ports set to AHCI (64/32-bit). Gigabyte ports (8, 9) require JMicronATA.kext (64/32-bit).
SATA 6 gb/s: not working.
IDE: not working.
USB 3.0: not working.
Optical Drive: working, any SATA optical drive (64/32-bit).
Shutdown/restart: working, with OpenHalRestart.kext (64/32-bit).
Sleep: working, requires DSDT patch (64/32-bit).
Yes, vanilla.
No, kexts and DSDT patches required for shutdown/restart, sleep, audio. LAN operating at 100mbit speeds even with settings manually set to 1000mbit.
Other kexts: fakesmc.kext, PlatformUUID.kext (64/32-bit).
GA-P55-UD4
Intel P55 Express
Install method: Vanilla Mac OS 10.6.0 + 10.6.2 combo update.
Boot loader: Chameleon 2.0-RC3.
EFI environment: PC EFI 10.5 with patch for Core i5/i7.
BIOS version: F4.
PCB revision: 1.0.
Audio: Realtek ALC888 codec, not yet working.
LAN: Realtek 8111D, OK with driver in /System/Library/Extensions: Realtek R1000 (64-bit).
SATA: OK Out-Of-the-Box(OOB), with SATA ports set to AHCI. Gigabyte ports require JMicronATA.kext.
IDE: Not tested.
Optical Drive: OK (OOB). Samsung SH-S223B.
Shutdown/restart: OK, with EvOReboot.kext.
Sleep: OK, requires DSDT patch.
Other kexts: fakesmc.kext, PlatformUUID.kext.
Yes, vanilla.
No, kexts and DSDT patches required for shutdown/restart, sleep, LAN and audio.
GA-EP41-UD3L
Intel G41 /ICH-7
Sound: RealTek ALC888 - working with patch LegacyHDA and a prebuild DSDT-file (files and description in method below)
LAN: RTL8111D - out of the box
CPU: Intel Core Duo Quad 2,83GHz
Memory 2*2GB Kingston 800MHz (note: only 2 DIMMS are supported on this MOBO if they are faster than 667MHz)
Chipset ICH-7 - out of the box
SATA disk - out of the box
IDE DVD-RW - out of the box
Graphics: Nvidia 9500GT silent (configured with OSX86 Tools) [6]
Bluetooth: ($20 Cambridge Silicon Radio) works perfect with vanilla driver, isync tested with Nokia (E71) smartphone.
Method used: Info about building a vanilla 10.6 usb-installstick from DVD is in thebrave's blog [7]
Bootloader: Chamelion 2.0-RC3 [8] (just follow instructions in doc/README to install bootblock, don't forget to copy /Extra from usb-stick to your HD's root)
Bootable USB stick with Snow Leopard was build using Lifehackers description [9]
Yes No
GA-EP41-UD3L
Intel G41 /ICH-7
Sound: RealTek ALC888 - working with these Kexts(see notes) [10]
LAN: RTL8111D - out of the box
Yes No
CPU: Pentium Dual Core 2,60 GHz
Chipset ICH-7 - out of the box
SATA disk - out of the box
SATA DVD-RW - out of the box
Graphics: Nvidia 9500GT - out of the box
Method used: Used LifeHacker method but see notes [11]
Note: Note: Disconnect all Sata devices except hard drive when installing. For sound I updated to 10.6.2 then deleted AppleHDA.kext and used Kext Utility to install two kexts from Link above. iTunes will not work until sound is patched. Important to note I did not use Lifehackers Bios settings, mobo gives an option to use best suggested settings, use these instead.
GA-EP43-DS3L [and -UD3L?]
Intel P43 / ICH10
Chipset ICH10 - needs SATA fix in DSDT or IOAHCIBlockStorageInjector.kext
JMicron ATA - needs patched JMicronATA.kext
Sound: RealTek ALC888 - working with DSDT (HPET & LegacyHDA) or additional patched HDA-Kext
LAN : Realtek 8111C - out of the box
Here is the link to the Blackosx Guide Guide
And this is a guide that shows multiple ways to make a Retail Bootloader Guide
(Also works with Snow Leopard Server).
Be careful when upgrading to 10.6.2: panic appears and sound stops with old SleepEnabler & HDA-Kext (replace the whole Extensions folder with the 10.6.2 version and use KextUtility before rebooting)
Kext for 10.6.2
Yes No
GA EP45-UD3r
Intel / ICH10
I install from another harddrive running OSX
If install retail version and upgrade from Apple you will do a lot more patching. It works but too much work.
The easiest method was Using SnowOSX_Universal_10.6(432)GM-v3.5 to install 10.6 with all options selected.
Then i used Snow_Leopard 10.6.2 by Hazard. I installed:
Chameleon RC3 10.5
NVEnabler (for my 9600gt)
ElliotForceLegacyRTC (keeps cmos from resetting)
ALC889a
---You don't have to have your dsdt patched when you select those options---
Yes No
After Installation completes you need to delete dsmos.kext
If you get a kernel panic use -v and boot again, sometimes works!
----If you want update from apple. Update then restart
boot into another OSX to remove some files after update completes
delete dsmos.kext and get sleepenabler.kext for 10.6.2 (old kext will cause KP)
After new sleepenabler, my sound died. Install ALC889a_sl_10
If you get a KP from AppleHDA.kext, Then delete it!
All should be good depending on other minor hardware you use.
GA-EP45-UD3P F5
Intel / ICH10
Retail 10.6 DVD (onto USB stick) + Chameleon 2.0RC3 + 10.6.2 combo update via [12]
BIOS version: F5
HPET: 64-bit
Audio: Realtek ALC888 working
LAN: Realtek OOB
SATA/IDE: ICH10, but IDE-to-SATA prevented Chameleon from starting, so we removed that disk first and redid.
Migration Asst ok on all except hung at SysPrefs > Network. After redo, we migrated all except Network to fix.
Shutdown/restart: OOB
Sleep: Works OOB
Boot loader: Chameleon 2.0-RC3
Yes Yes
GA-EG41MF-US2H
Intel G41 / ICH7
Vanilla Mac OS 10.6.0 + 10.6.2 combo update. (LIFEHACKER METHOD)
Boot loader: Chameleon 2.0-RC4.
BIOS version:F2.
PCB revision: 1.0.
Audio: Realtek ALC888 Not Working.
LAN: Realtek 8111B, OOB.
SATA/IDE: ICH7, OOB.
Optical Drive: HL-DT-ST DVD-ROM GDR-H30N, IDE OOB.
Shutdown/restart: OOB.
Sleep: Not Working.
HPET: Must be enabled, if not = kernel panic.
Yes No
- . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
[edit] XFX
Hardware Name
Chipset Notes EFI/kernel working
Fully Working w/o Patch
680i (MB-N680-ILT)
Nvidia 680i LT SLi
Intel Q6600 G0 2.4 Ghz @ 2.7 Ghz
OCZ 2x2GB DDR2-PC6400 800 Mhz + Corsair 2x1GB DDR2-PC6400 800 Mhz
BFG 9800 GTX+ (DVI, using Natit, NVEnabler, and NVinject from here)
Nforce Sata Controller (slashack's nForceATA, taken from nForceSLBoot132DVD)
Onboard NIC (NforceLan, taken from nForceSLBoot132DVD)
Onboard Audio (AppleAzaliaAudio download here)
Snow Leopard 10C540 (Installed from running nForceSLBoot132DVD) Chameleon 2.0 RC3 + Boot EFI 10.5 Click here for guide
Everything works except sleep. I'll edit this when I figure it out ;)
Yes, Vanilla No, most likely sleep, and dsdt.aml
. . . . . . . .
[edit] MSI
Hardware Name
Chipset Notes EFI/kernel working Fully Working
w/o Patch
945P Neo3 (MS-7236)
i945P, i82801 (ICH7/R)
Installation method: installed using SnowOSX Universal v3.6.
CPU: Core 2 Duo E7300 (works as Core 2 Solo)
SATA: Works
IDE: Untested
LAN: Works (RTL8110)
Audio: not working (ALC850) needs .kext ?
USB: Works
Shutdown/Restart: Working
Memory: Works, Kingston 4x1Gb DDR2 800 MHz
PC_EFI 10.5 with DSDT, Chameleon 2 RC4
unknown
[edit] Shuttle
Hardware Name
Chipset Notes EFI/kernel working
Fully Working
w/o Patch
K45/K48 INTEL Intel E7200 @ 3.2Ghz Yes, Vanilla Yes 32/64
p45 / ICH7
Corsair 2x1GB DDR2-PC6400 800 Mhz On Board Intel GMA950 DSDT Patched
ICH7 DSDT + IDE VIA E/E/IOATAFamily.kext
Onboard NIC Yukon 88E8056 Patched IONetWorkingFamily in E/E
Onboard Audio via E/E/ALC662.kext
Snow Leopard Retail DVD installed from existing Mac. Stock DVD no patch. Base System unmodified. Uses Chameleon or boot-132 E/E w/ DSDT only. Requires:NullCPUPowerManagement.kext, IOATAFamily.kext, OpenHaltRestart.kext, fakesmc.kext, PlatformUUID.kext, and SleepEnabler. No base mods only E/E
bit
. . . . . . . . . . . . . . . . . .
[edit] Graphics Cards
Please specify if your card is AGP, Integrated, PCI or PCI-E.Also, place chip and board manufacturer in their respective column.
[edit] AGP
[edit] NVIDIA
Hardware Name
Board-Manufacturer
Notes OpenCL /
QE / CI Resolution
Fully Working w/o Patch
GeForce 6800 128MB
XFX
PC_EFI 10.5 GraphicsEnabler, plus dsdt mod (without dsdt mod results in blinking blue screen)
Note that the dsdt mod linked above is for a 6200 AGP, so I changed some of the values for my 6800.
No/Yes/Yes All Yes (just GE and DSDT mod)
. . . . .
[edit] PCI Express
[edit] NVIDIA
Hardware Name
Board-Manufacturer
Notes OpenCL / QE / CI Resolution Fully
Working w/o Patch
GeForce 8400GS 512MB
ASUS Silent EFI String (OSx86Tools -> Custom GFX String)
Yes/Yes/Yes All Yes (EFI String)
EN6200TC 64Mb (256Mb shared)
ASUS SnowOSX Universal 10.6.2 used Unknown/Unknown/Unknown up to 1280x1024
Unknown
GeForce 9400 GT 512MB
XFX EFI String (OSx86Tools -> Custom GFX String, Dual Display)
Yes/Yes/Yes All Yes (EFI String)
GeForce 9500 GT
EVGA generated EFI string using NVCAP from this thread [13]
Yes/Yes/Yes All Yes
GeForce 9600 GSO 384mb
Palit Works with NVEnabler64.kext, dual monitor works, OpenCL works.
Yes/Yes/Yes All Yes
GeForce 9600 GT
Gigabyte N96TSL-1GI
Works Out-Of-the-Box using GraphicsEnabler=Yes option with Chameleon 2.0-RC3-r658-bin and PC EFI 10.5.
Yes/Yes/Yes All Yes
GeForce 9800 GTX+ 512mb
Palit Works Out-of-the-box with Efi string in com.apple.boot.plist, sleep and wake works not with normal sleep/restart fix
Yes/Yes/Yes All Yes (with Efi string)
GeForce GTS 220 512mb
Inno3D
Works with adding EFI String from OSX86Tool for a 9800GTX DDL with Chameleon RC4. Working with EFI String in Boot.plist with Chameleon RC4.
No/Yes/Yes All Yes (with Efi string)
GeForce GTS 250 512mb
Galaxy
Works with adding EFI String from OSX86Tool for a 9800GTX DDL with Chameleon RC3. Card is technically a 9800GTX. Still haven't gotten it working with Chameleon RC4.
Yes/Yes/Yes All Yes (with Efi string)
GeForce GTX 260 SC 896mb
eVGA
Works with adding EFI String from OSX86Tool for a 9800GTX DDL with Chameleon RC3. Still haven't gotten it working with Chameleon RC4. How it works with the 9800GTX DDL injection is beyond me, but it works!
Yes/Yes/Yes All Yes (with Efi string)
GeForce GTX 275 896Mb
Palit P5P43TD Pro
Works With : NVEnabler.Kext & NVEnabler64.kext (64 + 32 Bit Kernel Works Fine) Just Follow This Guide : Press Here
No/Yes/Yes All Yes
GeForce GTX 295 1792MB
EVGA Co-op
Works with EFI String with manually edited pciroots and NVGTX295.Fix.kext. Checkout this guide [14]
Yes/Yes/Yes all yes
EFI
GeForce 9500GT 1GB
EVGA . . . . . . . .
[edit] ATI
Hardware Name Board-
Manufacturer Notes OpenCL / QE / CI Resolution
Fully Working w/o Patch
Radeon Ultimate HD4670 512Mb GDDR3
Sapphire pcEFI_10.5 used Unknown/Unknown/Unknown All (up to 1920x1080 tested)
EFI String needed
PCI B/G/N WirelessN TP-Link TL-WN851N / TL-WN951N
TP-Link Atheros $30.00 cards recognized as AirPort Extreme. Work native in 32-bit and with AtherosFix.kext also work in 64-bit!
Yes 32-bit / No 64-bit . .
PCI-E Mini (Notebook)
B/G Broadcom Bevo 4311
Broadcom 4311
Comes as an option in older HP Notebooks, can be found online. Recognized out of the box as an Airport card with 10.5-10.6.2 (last rev as of edit date)
Yes 32-bit / Yes 64-bit . .
USB B/G/N
Netgear wg111v3 wireless usb stick
Netgear Realtek I don´t now if it works at 64 bit copy netgear wlan launcher at programs and the kext into System/libary/extensions!!!!! [16]
Yes 32-bit / No 64-bit . . . . .
PCI B/G/N
Netgear WN311B RangeMax Wireless Adapter
Netgear BCM4321
49.99 PCI card. Native support with BCM43xxEnabler.sh - Need to re-apply after AirPort updates. 64/32 bit - no sleep issues. Reports as 3rd party.
Yes 32 & 64 Bit . . . .
PCI B/G/N
Netgear WN311B RangeMax Wireless Adapter
Netgear BCM4329
PCI Card, same as above but must be a different PCB version as it also ships with the Broadcom 4329, added "pci14e4,4329" to Broadcom Plist in IO802Family.kext. Detected as Third Party Wireless Card, fully functional including wireless N through standard AirPort utility. Modified Kext in the Extras/Extensions folder of the EFI Partition, with Chameleon RC4.
Yes 32 & 64 Bit . . . .
.
[edit] Audio Devices
[edit] FireWire/1394
Hardware Name
Manufacturer Notes Drivers Used Fully Working
w/o Patch
FireFace 400 RME External Professional Firewire 400 Recording Interface/audio device
Drivers available at http://www.rme-audio.com
32/64-bit YES/YES . . .
. . . . .
[edit] USB 2.0
Hardware
Name
Manufacturer
Notes Drivers Used
Fully Working w/o Patch
USB 2.0 Behringer U-Control UCA-222 No drivers required automatically detected and functions in OSX 10.0.2, software
32/64-bit YES/YES . . .
available for MAC on supplied CD.
SB Connect (SB 0270)
Creative product page http://uk.europe.creative.com/products/product.asp?category=1&subcategory=207&product=15911
No Drivers required, Everything Works- SnowOSX10.6.2 Universal used
Yes
X-Fi Go! Creative Internal 1gb Memory Also Works OOB
No Drivers required, Everything Works OOB, Mic-IN and Wave-out
32/64-bit YES/Not Tested
Retrieved from "http://wiki.osx86project.org/wiki/index.php/HCL_10.6.2"
Category: Compatibility