M6s presentation
-
Upload
maarten-souren -
Category
Devices & Hardware
-
view
156 -
download
0
description
Transcript of M6s presentation
/ 261
PLEXTOR M6S SSD
Meets the 4 Key Needs
of General Users and Workstation Users
The Ultimate System Upgrade
/ 262
Delivers superior performance and True SpeedRandom read/write speed can reach maximums of 94,000/80,000 IOPS, and sequential read/write can achieve maximum speeds of 520/440 MB/s. Compared to the speed of the previous generation's M5S, the maximum performance increased by at least 50% (128G). When compared to traditional hard disk drives, the sequential read/write speed is even faster, by as much as 4 times! To maintain PLEXTOR's dedication toward speed, True Speed technology uses no compression, has no reduction in speed, and continuously ensures optimal computing performance.
Special power saving design with DEVSLP Mode supportThe M6S is equipped with the latest generation Marvell 88SS9188 dual-core control chip, and supports DEVSLP power mode, with power consumption at only 2mW! The new M6S provides better random and sequential performance than its predecessor the M6S, and is more energy efficient. Under the same operating environment, the power consumption of M6S has decreased by 30% to 50% compared to the previous generation‘s M5S. When compared to traditional 7200rpm hard disk drives, it gives your notebook up to 30 minutes of extra battery life!
Performance
Power Efficiency
/ 263
Shockproof, shatterproof, and information security protection mechanismsSolid State Drives (SSDs) use semiconductor components, without the rotary platters, moving arms, and read-write heads found in traditional hard disk drives, thus making them shatterproof, shockproof, and lightweight, and suitable for mobile users!
Strictly selected components, unequaled quality, and testing for stability after prolonged useStrictly selected server-grade Marvell control chips and Toshiba’s latest generation of high-speed flash memory, assembled into SSDs to Plextor’s stringent quality standards, and then every single SSD rigorously tested. With the advantage of strenuous preproduction testing in Plextor’s lab this gives the M6S excellent long-term stability and a calculated MTBF of 1.5 million hours.
Safety
Reliability
/ 264
Performance Delivers superior performance and True Speed
/ 265
Sequential Read 520 MB/s (max)Sequential Write 440 MB/s (max)Random Read 94,000 IOPS (4K QD32, max)Random Write 80,000 IOPS (4K QD32, max)
Compared with traditional hard disk drives, the M6S only takes 12 seconds to complete Windows 7 start-up, hard disk drives take at least 50 seconds – four times as long
CrystalDiskMark
Faster Boot Time
Equipped with Plextor's exclusive True Speed technology, the same speed is still maintained after prolonged use in real world environments, preventing SSD slowdown
Plextor’s M6S uses the highest level Toggle-mode Toshiba flash memory paired with the latest Marvell 88SS9188 dual-core server-grade controller chip, giving the M6S unrivaled performance. During high-speed read/write operations the M6S can continue to meet the data needs of multiple applications allowing it to maintain high performance and efficiency in even in heavy multi-tasking environments.
Performance Optimized superior performance
/ 266
Sequential read speed
5.3 times faster than HDD
3% faster than Other Budget SSD
Sequential write speed4.6 times faster than HDD
14% faster than Other Budget SSD
Performance Optimized superior performance
CrystalDiskMark Seq. Read CrystalDiskMark Seq. Write
/ 267
Random read speed
300 times faster than HDD
32% faster than other SSD
Random write speed
310 times faster than HDD
10% faster than other SSD
Performance Optimized superior performance
CDM 4K QD32 Read CDM 4K QD32 Write
/ 268
The Plextor 256GB M6S SSD takes only 12 seconds to start up Windows 7, while a 7200RPM 320GB traditional hard disk drive takes at least 50 seconds, four times as long
over 50s
12S
Plextor M6S
7200RPM HDD
Boots ina quarter
of the time
Performance Optimized superior performance
/ 269
Performance Optimized superior performance
Document Processing
*Testing result measured using PCMark8
/ 2610
Performance Optimized superior performance
Graphic Design & Animation
*Testing result measured using PCMark8
/ 2611
Performance Optimized superior performance
Gaming
*Testing result measured using PCMark8
/ 2612
True high performance unaffected by long-term usage
Controller IC
Reliable Flash
Firmware
Uses the latest Marvell 88SS9188 dual-core server-grade controller chip for high performance
Guaranteed genuine synchronous Toggle NAND flash of the highest quality, with 100% Burn-in / Aging Test
PLEXTOR exclusive firmware technology, provides stable and fast data processing algorithms
1
Random read-write speed (max)94,000/80,000 IOPS
2
3
Performance The power of True Speed
/ 2613
Other brands of SSDs start with fast write speeds, but their write speeds drastically drop over time; the M6S maintains the same read-write speed even after prolonged use
S Brand ExO250GB
Plextor M6S256GB
S Brand ExO120GB
Plextor M6S256GB
Sequential Write 128K- Speed vs. Time
Performance The power of True Speed
/ 2614
Power Efficiency The DEVSLP mode advantage
/ 2615
The M6S meets the latest SATA power saving mode specification, and supports the latest DEVSLP power mode, allowing M6S to stay powered on and connected for 24 hours.
In DEVSLP power mode, the M6S's power consumption is a mere 2mW, and resume time only 100 milliseconds.
Under sleep mode, power consumption is even lower, thus extending battery life.
Power Efficiency The DEVSLP mode advantage
FromDEVSLP
FromS3 Mode
Time ConsumptionReady Time Resume
/ 2616
Power Efficiency The DEVSLP mode advantage
Power Consumption
250mW=0.25W
Standby Mode Operating
/ 2617
Compared with its predecessor the M5S, the M6S uses 30% to 50% less power on average
Power Efficiency Special power saving design
Active Idle
/ 2618
The M6S uses 80% less power on average than traditional hard disk drives,
Power Efficiency Special power saving design
Active Idle
/ 2619
SafetyShockproof and shatterproof semiconductor components
/ 2620
Rotary platters, arms, and moving heads
Semiconductor components
The M6S's control chips and flash memory are made of semiconductor components, unlike the rotary platters, arms and read-write heads of traditional hard disk drives. This makes the M6S shockproof, shatterproof, and lightweight, making ideal storage media for office professionals on the move!
SafetyShockproof and shatterproof semiconductor
components
/ 2621
DurabilityPlextor reliability testing
for a MTBF of 1.5 million hours
/ 2622
48hr
48hr sequential read-write test
4000time
4000 times Idle test
250 times Power Cycle
MTBF 1.5 million hours
The strictest pre-production tests in the industry simulate the real world environment including extended read-write tests ensure maximum stability and reliability – giving the M6S a calculated MTBF of 1.5 million hour.
465 SSD units are tested simultaneously in 576 hours of continuous tests before mass production
=+ +
DurabilityPlextor reliability testing for a MTBF of
1.5 million hours
/ 2623
48hr Sustained Read and Write TestTwo days continuous 4K file read / write test; zero error pass requirement meaning no BSOD, black screens, or screen freezes
4000 Times Idle Test – Sleep and Hibernation TestAfter 24 hours of sequential read / write, enter S3 sleep for 30 minutes and wake up, and repeat 4000 times; zero error pass requirement meaning no BSOD, black screens, or screen freezes
250 Times Power Cycle – Cold and Warm Boot TestContinuously cold boot and warm boot cycle for 250 times, no units may display errors
48hr
4000time
250 times
DurabilityPlextor reliability testing for a MTBF of
1.5 million hours
/ 2624
FLEXSTARTesting Chamber
FLEXSTAR Testing Chamber @ 60 High Temperature ℃ @ MTBF 1.5 Million Hrs. @ 36.5 TBs Read/Write
Plextor SSDs must go through multiple layers of strict reliability tests before it can enter mass production. 465 pre-production units of SSDs are tested simultaneously in continuous 576 hour tests. Running these extended large-scale parallel tests ensures high reliability in read-write operations for end users. We use FLEXSTAR® testing systems, the industry’s best test chambers, to simulate the conditions of various real work environments so that PLEXTOR SSDs can maintain the highest operation quality and stability under all kinds of harsh environments and operating conditions.
DurabilityPlextor reliability testing for a MTBF of
1.5 million hours
/ 2625
Serial-ATA 6Gbps compatible with SATA 3Gbps & SATA 1.5Gbps
Controller Chip: Marvell 88SS9188
Performance:
Dimensions: 100mm x 69.85mm x 6.8mm for ultra-slim notebook HDD replacement
PLEXTOR – M6S 128/256/512GB
128GB 256GB 512GB
DRAM Cache 256MB DDR3 512MB DDR3 768MB DDR3
Sequential Read Speed (SATA 6Gb/s)
Up to 520 MB/s Up to 520 MB/s Up to 520 MB/s
Sequential Write Speed (SATA 6Gb/s)
Up to 300MB/s Up to 420 MB/s Up to 440 MB/s
Random Read Speed (IOPS 4KB)
Up to 88,000 Up to 90,000 Up to 94,000
Random Write Speed (IOPS 4KB)
Up to 75,000 Up to 80,000 Up to 80,000
/ 2626
Customer Service Official Website
Plextor Global Website
http://www.plextor.com/
http://www.facebook.com/PlextorGlobal
YouTube
http://www.youtube.com/user/PLEXTOROFFICIAL
Customer Service
SSD ZONE forum (English)Forum
3 Year PLEXTOR Warranty
Our commitment to excellent quality
including using top class components and
undertaking rigorous testing allows
PLEXTOR to provide a 3 year warranty.
Users may contact the technical support
center at any time, to ask product-related
technical questions, or rapidly make
arrangements for repair or replacement
through our integrated distribution
services network, providing them with the
complete reassurance and support of a full
SSD warranty service experience.
/ 2627
THANK YOU