M320 Multiservice Edge Router InterfaceModule ReferenceMay 2013This guide provides an overviewand description of the PICs supported by the JuniperNetworks M320 Multiservice Edge Router.ContentsM320PICDescription. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3High Availability Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4M320PICsSupported. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5M320FPCsSupported. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14M320 PIC Combination Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15M320 PIC/FPC Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15PIC/FPC Compatibility (Type 1 FPCs and Type 1 PICs) . . . . . . . . . . . . . . . . . . 16PIC/FPC Compatibility (Type 2 FPCs and Type 2 PICs) . . . . . . . . . . . . . . . . . . 19PIC/FPC Compatibility (Type 3 FPCs and Type 3 PICs) . . . . . . . . . . . . . . . . . . 21ATM2DS3IQPIC(M320Router). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23ATM2 E3 IQ PIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25ATM2 OC3/STM1 IQ PIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27ATM2 OC12/STM4 IQ PICs (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30ATM2 OC48/STM16 IQPIC with SFP (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . 33Channelized DS3 IQ PIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Channelized DS3/E3 Enhanced IQ (IQE) PIC (M320 Router) . . . . . . . . . . . . . . . . 38Channelized E1 IQPIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Channelized OC3/STM1 Circuit Emulation PIC with SFP (M320 Router) . . . . . . . 44Channelized E1/T1 Enhanced IQ (IQE) PIC (M320 Router) . . . . . . . . . . . . . . . . . . 47ChannelizedOC3IQPIC(M320Router). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Channelized OC3/STM1 Enhanced IQ (IQE) PIC with SFP (M320 Router) . . . . . . 53Channelized OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320 Router) . . . . . 58Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP (M320 Router) . . . 63Channelized STM1 IQPIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Channelized T1 IQPIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70DS3/E3 Enhanced IQ (IQE) PIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . 73E1 PICs (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76E1/T1CircuitEmulationPIC(M320Router). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78E3PIC(M320Router). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82E3 IQ PIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 841 Copyright 2013, Juniper Networks, Inc.EIA-530PIC(M320Router). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86Fast Ethernet PICs (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89Gigabit Ethernet PICs with SFP (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Gigabit Ethernet IQPICs with SFP (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . 95Gigabit Ethernet IQ2 PICs with SFP (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . 97Gigabit Ethernet Enhanced IQ2 (IQ2E) PICs with SFP (M320 Router) . . . . . . . . . 10110-Gigabit Ethernet IQ2 PIC with XFP (M320 Router) . . . . . . . . . . . . . . . . . . . . . 10510-Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with XFP (M320 Router) . . . . . . 10810-Gigabit Ethernet PIC with XENPAK (M320 Router) . . . . . . . . . . . . . . . . . . . . . . 11110-Gigabit Ethernet DWDMPIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . 113MultiservicesPICs(M320Router). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115SONET/SDH OC3/STM1 Enhanced IQ (IQE) PIC with SFP (M320 Router) . . . . . 118SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP (M320 Router) . . . . . . . . . . 121SONET/SDH OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320 Router) . . . . 124SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (M320 Router) . . . . . . . . 127SONET/SDH OC48c/STM16 PICs with SFP (M320 Router) . . . . . . . . . . . . . . . . 130SONET/SDH OC48/STM16 Enhanced IQ (IQE) PIC with SFP (M320 Router) . . 133SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP (M320 Router) . . . . . . . 138SONET/SDH OC192c/STM64 PIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . 141SONET/SDH OC192/STM64 PIC with XFP (M320 Router) . . . . . . . . . . . . . . . . . 144T1 PIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147TunnelServicesPIC(M320Router). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149Junos OS Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150RequestingTechnical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Self-HelpOnlineToolsandResources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Copyright 2013, Juniper Networks, Inc. 2M320 Multiservice Edge Router Interface Module ReferenceM320PIC DescriptionPICs provide the physical connection to various network media types, receiving incomingpackets fromthe network and transmitting outgoing packets to the network. During thisprocess, each PIC performs framing and line-speed signaling for its media type. Beforetransmitting outgoing data packets, the PICs encapsulate the packets received fromtheFPCs. Each PIC is equipped with an ASIC that performs control functions specific to themedia type of that PIC.PICs are hot-removable and hot-insertable. You can install up to four PICs in the slotsof each Type 1 and Type 2 FPC, and up to two PICs in the slots of each Type 3 FPC. Type1 and Type 2 PICs have captive screws at their upper and lower corners. Type 3 PICs havean upper ejector handle and a lower captive screw.Therouter supportsvariousPICs, includingATM, Channelized, Gigabit Ethernet, IPServices,and SONET/SDH interfaces. Blank PICs resemble other PICs but do not provide anyphysical connection or activity. When a slot is not occupied by a PIC, you must insert ablank PIC to fill the empty slot and ensure proper cooling of the system.RelatedDocumentationM320 PICs Supported on page 5 M320 End-of-Life PICs Supported Maintaining M320 PICs and PIC Cables Replacing an M320 PIC Troubleshooting the M320 PICs3 Copyright 2013, Juniper Networks, Inc.M320 PIC DescriptionHigh Availability FeaturesHigh availability features include Routing Engine redundancy, graceful Routing Engineswitchover (GRES), nonstop bridging, nonstop active routing, graceful restart for routingprotocols, Virtual Router Redundancy Protocol (VRRP), and unified in-service softwareupgrade (ISSU). Some high availability features are not supported by all platforms andall PICs. For information about the first supported Junos OS Release for these featuresby PIC and platform, see the Junos OS High Availability Library for Routing Devices.RelatedDocumentationM320 PIC Description on page 3 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 5 M320 FPCs Supported on page 14 M320 PIC/FPC Compatibility on page 15Copyright 2013, Juniper Networks, Inc. 4M320 Multiservice Edge Router Interface Module ReferenceM320PICs SupportedThe following tables list the PICs supported by the M320 router. The PICs are listedalphabetically by PIC family. Table 1 on page 5 lists the ATM2 IQPICs. Table 2 on page 6 lists the Channelized IQPICs. Table 3 on page 6 lists the Channelized IQE PICs. Table 4 on page 7 lists the Circuit Emulation PICs. Table 5 on page 7 lists the DS3, E1, E3, and T1 PICs. Table 6 on page 8 lists the EIA-530 PIC. Table 7 on page 8 lists the Fast Ethernet PICs. Table 8 on page 9 lists the Gigabit Ethernet PICs. Table 9 on page 11 lists the 10-Gigabit Ethernet PICs. Table 10 on page 11 lists the Services PICs. Table 11 on page 12 lists the SONET/SDH PICs.Table 1: ATM2 IQPICs Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type6.4 Coaxial: 10 ft (3.05 m) posilock SMBto BNC (provided) Four pairs of Rx and Txcoaxial cablesPB-4DS3-ATM2 4 ATM2 DS3 IQPIC (M320Router) on page 236.3 Coaxial: 10 ft (3.05 m) posilock SMBto BNC cable (provided) Four pairs of Rx and Txcoaxial cablesPB-4E3-ATM2 4 ATM2 E3 IQPIC (M320Router) on page 256.2 Optical: SC/PC PB-2OC3-ATM2-MMPB-2OC3-ATM2-SMIR2 ATM2 OC3/STM1 IQPIC(M320 Router) on page 27ATM2 OC12/STM4 IQPICs (M320 Router) on page 306.2 Optical: SC/PC PB-1OC12-ATM2-MMPB-1OC12-ATM2-SMIR1 ATM2 OC12/STM4 IQPIC6.2 Optical: SC/PC PB-2OC12-ATM2-MMPB-2OC12-ATM2-SMIR2 ATM2 OC12/STM4 IQPIC5 Copyright 2013, Juniper Networks, Inc.M320 PICs SupportedTable 1: ATM2 IQPICs Supported by the M320Router (continued)First Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type7.3 Optical: LC/PC PB-1OC48-ATM2-SFP 1 ATM2 OC48/STM16 IQPICwith SFP (M320 Router) onpage 33Table 2: Channelized IQPICs Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type6.2 Coaxial Standard DS3 BNC coaxialcable interfacesPB-4CHDS3-QPP 4 Channelized DS3 IQPIC(M320 Router) on page 369.1R49.2R39.3R1 120-ohmRJ-48C PB-10CHE1-RJ48-QPP-N 10 Channelized E1 IQPIC (M320Router) on page 427.1 Optical: SC/PC PB-1CHOC3-SMIR-QPP 1 Channelized OC3 IQPIC(M320 Router) on page 506.2 Optical: SC/PC PB-1CHSTM1-SMIR-QPP 1 Channelized STM1 IQPIC(M320 Router) on page 687.4 120-ohmRJ-48C connector(female)PB-10CHT1-RJ48-QPP 10 Channelized T1 IQPIC (M320Router) on page 70Table 3: Channelized IQE PICs Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type9.3 Coaxial Standard DS3 BNC coaxialcable interfacesPB-4CHDS3-E3-IQE-BNC 4 Channelized DS3/E3Enhanced IQ(IQE) PIC (M320Router) on page 389.5 120-ohmRJ-48C connector(female)PB-10CHE1-T1-IQE-RJ48 10 Channelized E1/T1 EnhancedIQ(IQE) PIC (M320 Router)on page 479.3 Optical: LC/PC PB-2CHOC3-STM1-IQE-SFP 2 Channelized OC3/STM1Enhanced IQ(IQE) PIC withSFP (M320 Router) onpage 53Channelized OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320 Router) on page 58Copyright 2013, Juniper Networks, Inc. 6M320 Multiservice Edge Router Interface Module ReferenceTable 3: Channelized IQE PICs Supported by the M320Router (continued)First Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type9.3 Optical: LC/PC PB-1CHOC12-STM4-IQE-SFP 1 Channelized OC12/STM4Enhanced IQ(IQE) PIC withSFP9.4 Optical: LC/PC PB-4CHOC12-STM4-IQE-SFP 4 Channelized OC12/STM4Enhanced IQ(IQE) PIC withSFP9.4 Optical: LC/PC PB-1CHOC48-STM16-IQE-SFP 1 Channelized OC48/STM16Enhanced IQ(IQE) PIC withSFP (M320 Router) onpage 63Table 4: Circuit Emulation PICs Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type9.4 Optical: LC/PC PB-4CHOC3-CE-SFP 4 Channelized OC3/STM1Circuit EmulationPICwithSFP(M320 Router) on page 449.4 RJ-21 connector Cables are rated forintra-building connectionsonly.PB-12T1E1-CE-TELCO 12 E1/T1 Circuit Emulation PIC(M320 Router) on page 78Table 5: DS3, E1, E3, and T1 PICs Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type9.3R2 Coaxial Standard DS3 BNC coaxialcable interfacesPB-4DS3-E3-IQE-BNC 4 DS3/E3 Enhanced IQ(IQE)PIC(M320Router) onpage736.4 Four RJ-48 connectors (oneper port) Four coaxial connectorsCustom10-ft (3.05-m)posilock to BNC male cable,separate Rx and TxPB-4E1-COAXPB-4E1-RJ484 E1 PICs (M320 Router) onpage 766.3 Custom10 ft (3.05 m)posilock to BNC male cable,separate RX and TXPB-4E3-QPP 4 E3 PIC (M320 Router) onpage 827 Copyright 2013, Juniper Networks, Inc.M320 PICs SupportedTable 5: DS3, E1, E3, and T1 PICs Supported by the M320Router (continued)First Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type6.2 Coaxial Standard DS3 BNC coaxialcable interfacesPB-4E3-QPP 4 E3 IQPIC (M320 Router) onpage 846.4 100-ohmRJ-48 connector PB-4T1-RJ48 4 T1 PIC (M320 Router) onpage 147Table 6: EIA-530PIC Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type6.2 Two DB-25 male connectors(one per port, included withPIC) V.35 requires an EIA-530 toV.35 cable and connects toa V.35 DTE 34-pinWinchester type male cable(one per port) X.21 requires an EIA-530 toX.21 cable and connects to aX.21 DTE DB-15 male cablePB-2EIA530 2 EIA-530 PIC (M320 Router)on page 86Table 7: Fast Ethernet PICs Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and TypeFast Ethernet PICs (M320 Router) on page 896.2 RJ-45 Two-pair, Category 5unshielded twisted-pair Pinout: MDI noncrossoverPB-4FE-TX 4 Fast Ethernet PIC6.3 MT-RJ female PB-8FE-FX 8 Fast Ethernet PIC6.2 One very high densityconnector interface(VHDCI)to RJ-21 cable that connectsto an RJ-45 patch panelPB-12FE-TX-MDIPB-12FE-TX-MDIX12 Fast Ethernet PICCopyright 2013, Juniper Networks, Inc. 8M320 Multiservice Edge Router Interface Module ReferenceTable 7: Fast Ethernet PICs Supported by the M320Router (continued)First Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type6.4 Four VHDCI connectorsVHDCI-to-RJ-21 cables thatconnect to an RJ-45 patchpanelPB-48FE-TX 48 Fast Ethernet PICTable 8: Gigabit Ethernet PICs Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and TypeGigabit EthernetGigabit Ethernet PICs with SFP (M320 Router) on page 926.4 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivity Pinout: MDI crossoverPB-1GE-SFP 1 Gigabit Ethernet PIC withSFP6.4 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivityPB-2GE-SFP 2 Gigabit Ethernet PIC withSFP7.0 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivityPB-4GE-SFP 4 Gigabit Ethernet PIC withSFP6.2 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivityPC-10GE-SFP 10 Gigabit Ethernet PIC withSFPGigabit Ethernet IQGigabit Ethernet IQPICs with SFP (M320 Router) on page 959 Copyright 2013, Juniper Networks, Inc.M320 PICs SupportedTable 8: Gigabit Ethernet PICs Supported by the M320Router (continued)First Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type6.2 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivity Pinout: MDI crossoverPB-1GE-SFP-QPP 1 Gigabit Ethernet IQPICwith SFP6.2 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivity Pinout: MDI crossoverPB-2GE-SFP-QPP 2 Gigabit Ethernet IQPICwith SFPGigabit Ethernet IQ2Gigabit Ethernet IQ2 PICs with SFP (M320 Router) on page 977.6R3 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivityPB-4GE-TYPE1-SFP-IQ2 4 Gigabit Ethernet IQ2 PICwith SFP7.6R2 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivityPB-8GE-TYPE2-SFP-IQ2 8 Gigabit Ethernet IQ2 PICwith SFP8.2 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivityPC-8GE-TYPE3-SFP-IQ2 8 Gigabit Ethernet IQ2 PICwith SFPGigabit Ethernet IQ2EGigabit Ethernet Enhanced IQ2 (IQ2E) PICs with SFP (M320 Router) on page 101Copyright 2013, Juniper Networks, Inc. 10M320 Multiservice Edge Router Interface Module ReferenceTable 8: Gigabit Ethernet PICs Supported by the M320Router (continued)First Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type9.4 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivityPB-4GE-TYPE1-SFP-IQ2E 4 Type 1 Gigabit EthernetEnhanced IQ2 (IQ2E) PICwith SFP9.4 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivityPB-8GE-TYPE2-SFP-IQ2E 8 Type 2 Gigabit EthernetEnhanced IQ2 (IQ2E) PICwith SFP9.4 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded twisted-pairconnectivityPC-8GE-TYPE3-SFP-IQ2E 8 Type 3 Gigabit EthernetEnhanced IQ2 (IQ2E) PICwith SFPTable 9: 10-Gigabit Ethernet PICs Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type6.2 XENPAK PC-1XGE-XENPAK 1 10-Gigabit Ethernet PICwithXENPAK (M320 Router) onpage 1117.5 Optical: SC/PC PC-1XGE-DWDM-CBAND 1 10-Gigabit Ethernet DWDMPIC (M320 Router) onpage 1138.0R3 Optical: LC/PC PC-1XGE-TYPE3XFP-IQ2 1 10-Gigabit Ethernet IQ2 PICwith XFP (M320 Router) onpage 1059.4 Optical: LC/PC PC-1XGE-TYPE3XFP-IQ2E 1 10-Gigabit EthernetEnhanced IQ2 (IQ2E) PICwith XFP (M320 Router) onpage 108Table 10: Service PICs Supported by the M320RouterFirst Junos OSRelease Support Connector Model Number Ports PIC Family and TypeMultiservices PICs (M320 Router) on page 11511 Copyright 2013, Juniper Networks, Inc.M320 PICs SupportedTable 10: Service PICs Supported by the M320Router (continued)First Junos OSRelease Support Connector Model Number Ports PIC Family and Type8.1 None PB-MS-100-1 0 100 Multiservices PIC8.1R2 None PB-MS-400-2 0 400 Multiservices PIC8.3 None PB-MS-500-3 0 500 Multiservices PICTunnel Services PIC (M320 Router) on page 1496.2 None PB-TUNNEL-1 0 Type 1 Tunnel Services PIC6.2 None PB-TUNNEL 0 Type2Tunnel Services PIC6.3 None PC-TUNNEL 0 Type3Tunnel Services PICTable 11: SONET/SDHPICs Supported by the M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports PIC Family and TypeSONET/SDH9.3R2 Optical: LC/PC PB-4OC3-STM1-IQE-SFP 4 SONET/SDH OC3/STM1 Enhanced IQ(IQE) PIC with SFP (M320 Router) onpage 118SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP (M320 Router) on page 1218.4 Optical: LC/PC PB-4OC3-1OC12-SON-SFP 4 SONET/SDH OC3/STM1 (Multi-Rate)PIC with SFP8.3 Optical: LC/PC PB-4OC3-1OC12-SON2-SFP 4 SONET/SDH OC3/STM1 (Multi-Rate)PIC with SFP9.3 Optical: LC/PC PB-1OC12-STM4-IQE-SFP 1 SONET/SDH OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320 Router) onpage 124SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (M320 Router) on page 1278.4 Optical: LC/PC PB-1OC12-SON-SFP 1 SONET/SDHOC12/STM4(Multi-Rate)PIC with SFP8.3 Optical: LC/PC PB-4OC3-4OC12-SON-SFP 4 SONET/SDHOC12/STM4(Multi-Rate)PIC with SFP6.2 Optical: LC/PC PC-4OC48-SON-SFP 4 SONET/SDH OC48c/STM16 PICs withSFP (M320 Router) on page 130Copyright 2013, Juniper Networks, Inc. 12M320 Multiservice Edge Router Interface Module ReferenceTable 11: SONET/SDHPICs Supported by the M320Router (continued)First Junos OSReleaseSupport Connector Model Number Ports PIC Family and Type10.4R2 Optical: LC/PC PC-4OC48-STM16-IQE-SFP 4 SONET/SDHOC48/STM16EnhancedIQ(IQE) PIC with SFP (M320 Router) onpage 1338.3 Optical: LC/PC PB-1OC48-SON-B-SFP 1 SONET/SDHOC48/STM16(Multi-Rate)PICwithSFP(M320Router) onpage1386.2 12-ribbonmultimode fiberwithMTPconnectorPC-1OC192-SON-VSR 1 SONET/SDHOC192c/STM64PIC(M320Router) on page 1418.1 Optical: LC/PC PC-1OC192-SON-XFP 1 SONET/SDH OC192/STM64 PIC withXFP (M320 Router) on page 144RelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 FPCs Supported on page 14 M320 PIC/FPC Compatibility on page 1513 Copyright 2013, Juniper Networks, Inc.M320 PICs SupportedM320FPCs SupportedTable 12 on page 14 lists the FPCs that the M320 router supports. You can install anycombination of the following FPCs in the M320 router.Table 12: FPCs Supported by the M320RouterFirst Junos OSReleaseMaximumThroughput per FPC(Full-Duplex)MaximumNumber of PICsSupportedFPC Model Number FPC Name FPC Type6.2 4 Gbps 4 M320-FPC1 FPC1 17.5 4 Gbps 4 M320-FPC1-E2 Enhanced II FPC1 18.4 4 Gbps 4 M320-FPC1-E3 Enhanced III FPC1 16.2 16 Gbps 4 M320-FPC2 FPC2 27.5 16 Gbps 4 M320-FPC2-E2 Enhanced II FPC2 28.4 16 Gbps 4 M320-FPC2-E3 Enhanced III FPC2 26.2 20 Gbps 2 M320-FPC3 FPC3 37.5 20 Gbps 2 M320-FPC3-E2 Enhanced II FPC3 38.4 20 Gbps 2 M320-FPC3-E3 Enhanced III FPC3 3RelatedDocumentationMaintaining M320 FPCs Replacing an M320 FPC Troubleshooting the M320 FPCsCopyright 2013, Juniper Networks, Inc. 14M320 Multiservice Edge Router Interface Module ReferenceM320PIC Combination LimitationsIn most cases, you can install PICs of different media types on the same FPC as long asthe FPC and the router support those PICs. However, configuration rules might limitcertain combinations of PICs on some platforms.Newer Junos OS services for some PICs can require significant Internet Processor ASICmemory. Ethernet andSONETPICs typically donot uselargeamounts of memory. GigabitEthernet, ATM2, IQserial PICs, and Multiservices PICs use more. To conserve memory,you can group PICs in the same family together on the same FPC.If you have different PIC families on a single FPC, reviewthe configuration rules to planwhich PICs to install on the FPCs for your router. Consult technical bulletinPSN-2007-01-023 for information about configuration rules for PIC combinations on theJuniper Networks Support site at https://www.juniper.net/alerts/.WhenyouupgradetoJunos OSRelease7.5or later, awarningappears if any configurationrules affect your PIC combinations. If you continue the installation, one or more PICsmight appear to be online (the LEDs are on), but the Junos OS cannot enable themandthey cannot pass traffic. As a workaround, you can: Install a Junos OS release that supports the combination. Install PICs on a different FPC. Remove PICs fromthe affected FPC.RelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PICs Supported on page 5 M320 FPCs Supported on page 14 M320 PIC/FPC Compatibility on page 15M320PIC/FPC CompatibilityThe PIC/FPC compatibility matrixes list the first Junos OS Release in which an FPCsupports eachPICcurrentlysupportedfor theM320router. For example, Junos OSRelease7.5 is the first release in which the E-II-FPC1 supports the ATM2 OC3/STM1 IQ, 2-port PIC.NOTE: A indicates that the PIC is not supported by the FPC. PIC/FPC Compatibility (Type 1 FPCs and Type 1 PICs) on page 16 PIC/FPC Compatibility (Type 2 FPCs and Type 2 PICs) on page 19 PIC/FPC Compatibility (Type 3 FPCs and Type 3 PICs) on page 2115 Copyright 2013, Juniper Networks, Inc.M320 PIC Combination LimitationsPIC/FPC Compatibility (Type 1 FPCs and Type 1 PICs)Table 13 on page 16 provides a PIC/FPC compatibility matrix for the current Type 1 PICsfor the M320router and Type 1 FPCs. Alink to the PICdescription is included in the table.Table 13: M320PIC/FPC Compatibility Type 1E-III FPC1 E-II FPC1 FPC1 PIC Model Number PICATM2 IQPICs8.4 7.5 6.4 PB-4DS3-ATM2 ATM2 DS3 IQPIC (M320 Router) onpage 234-port8.4 7.5 6.3 PB-4E3-ATM2 ATM2 E3 IQPIC (M320 Router) onpage 254-port8.4 7.5 6.2 PB-2OC3-ATM2-MM ATM2 OC3/STM1 IQPIC (M320Router) on page 272-port8.4 7.5 6.2 PB-2OC3-ATM2-SMIR8.4 7.5 6.2 PB-1OC12-ATM2-MM ATM2 OC12/STM4 IQPICs (M320Router) on page 301-port8.4 7.5 6.2 PB-1OC12-ATM2-SMIR8.4 7.5 6.2 PB-1OC12-ATM2-MMChannelized Circuit Emulation PICs9.4 PB-4CHOC3-CE-SFP Channelized OC3/STM1 CircuitEmulation PIC with SFP (M320Router) on page 44Channelized IQPICs8.4 7.5 6.2 PB-4CHDS3-QPP Channelized DS3 IQPIC (M320Router) on page 364-port9.1R49.2R39.3R19.1R49.2R39.3R19.1R49.2R39.3R1PB-1OCHE1-RJ48-QPP-N ChannelizedE1 IQPIC(M320Router)on page 4210-port8.4 7.5 7.1 PB-1CHOC3-SMIR-QPP Channelized OC3 IQPIC (M320Router) on page 501-port8.4 7.5 6.2 PB-1CHSTM1-SMIR-QPP Channelized STM1 IQPIC (M320Router) on page 681-portCopyright 2013, Juniper Networks, Inc. 16M320 Multiservice Edge Router Interface Module ReferenceTable 13: M320PIC/FPC Compatibility Type 1 (continued)E-III FPC1 E-II FPC1 FPC1 PIC Model Number PIC8.4 7.5 7.4 PB-1OCHT1-RJ48-QPP Channelized T1 IQPIC (M320Router) on page 7010-portChannelized Enhanced IQ(IQE) PICs9.3 9.3 PB-4CHDS3-E3IQE-BNC Channelized DS3/E3 Enhanced IQ(IQE) PIC(M320Router) on page 384-port9.5 9.5 PB-10CHE1-T1-IQE-RJ48 ChannelizedE1/T1 EnhancedIQ(IQE)PIC (M320 Router) on page 4710-port9.3 9.3 PB-2CHOC3-STM1-IQE-SFP ChannelizedOC3/STM1 EnhancedIQ(IQE) PIC with SFP (M320 Router)on page 532-port9.3 9.3 PB-1CHOC12-STM4-IQE-SFP Channelized OC12/STM4 EnhancedIQ(IQE) PICwithSFP(M320Router)on page 58 IQE,1-portT1, DS3, E1, E3 PICs 6.2 PB-4DS3 DS3 EOL PIC (M320 Router),4-port9.3R2 9.3R2 PB-4DS3-E3-IQE-BNC DS3/E3 Enhanced IQ(IQE) PIC(M320 Router) on page 734-port8.4 7.5 6.4 PB-4E1-COAX E1 PICs (M320 Router) on page 76,4-port8.4 7.5 6.4 PB-4E1-RJ489.4 PB-12T1E1-CE-TELCO E1/T1 Circuit Emulation PIC (M320Router) on page 78, 12-port 7.5 6.3 PB-4E3 E3 PIC (M320 Router) on page 82,4-port8.4 7.5 6.4 PB-4T1-RJ48 T1 PIC (M320 Router) on page 147,4-portE3 IQPIC8.4 7.5 6.2 PB-4E3-QPP E3IQPIC(M320Router) onpage84,4-portEIA-530PIC17 Copyright 2013, Juniper Networks, Inc.M320 PIC/FPC CompatibilityTable 13: M320PIC/FPC Compatibility Type 1 (continued)E-III FPC1 E-II FPC1 FPC1 PIC Model Number PIC8.4 7.5 6.2 PB-2EIA530 EIA-530 PIC (M320 Router) onpage 86,2-portEthernet PICs8.4 7.5 6.2 PB-4FE-TX Fast Ethernet PICs (M320 Router)on page 89,4-port8.4 7.5 6.3 PB-8FE-FX Fast Ethernet PICs (M320 Router)on page 89,8-port8.4 7.5 6.2 PB-12FE-TX Fast Ethernet PICs (M320 Router)on page 89,12-port8.4 7.5 6.4 PB-1GE-SFP Gigabit Ethernet PICs with SFP(M320 Router) on page 92,1-port SFPEthernet IQPICs8.4 7.5 6.2 PB-1GE-SFP-QPP Gigabit Ethernet IQPICs with SFP(M320 Router) on page 95,1-port SFPEthernet IQ2 PICs8.4 7.6R3 7.6R3 PB-4GE-TYPE1-SFP-IQ2 Gigabit Ethernet IQ2 PICs with SFP(M320 Router) on page 97,4-port SFPEthernet Enhanced IQ2 (IQ2E) PICs9.4 9.4 9.4 PB-4GE-TYPE1-SFP-IQ2E Gigabit Ethernet Enhanced IQ2(IQ2E) PICs with SFP(M320Router)on page 101,4-port SFPServices PICs8.4 8.1 8.1 PB-MS-100-1 Multiservices PICs (M320 Router)on page 115 1008.4 7.5 6.2 PB-TUNNEL-1 Tunnel Services PIC (M320 Router)on page 149Copyright 2013, Juniper Networks, Inc. 18M320 Multiservice Edge Router Interface Module ReferenceTable 13: M320PIC/FPC Compatibility Type 1 (continued)E-III FPC1 E-II FPC1 FPC1 PIC Model Number PICSONET/SDHPICs9.3R2 9.3R2 PB-4OC3-STM1-IQE-SFP SONET/SDH OC3/STM1 EnhancedIQ(IQE) PICwithSFP(M320Router)on page 1184-port, SFP8.4 8.4 8.4 PB-4OC3-1OC12-SON-SFP SONET/SDHOC3/STM1 (Multi-Rate)PICs with SFP (M320 Router) onpage 121,4-port, SFP (Type 1)9.3 9.3 PB-1OC12-STM4-IQE-SFP SONET/SDH OC12/STM4 EnhancedIQ(IQE) PICwithSFP(M320Router)on page 124,1-port, SFP8.4 8.4 8.4 PB-1OC12-SON-SFP SONET/SDH OC12/STM4(Multi-Rate) PICs with SFP (M320Router) on page 127),1-port, SFPPIC/FPC Compatibility (Type 2 FPCs and Type 2 PICs)Table 14 on page 19 provides a PIC/FPC compatibility matrix for the current Type 2 PICsfor the M320router and Type 2 FPCs. Alink to the PICdescription is included in the table.Table 14: M320PIC/FPC Compatibility Type 2E-III-FPC2 E-II FPC2 FPC2 Model Number PICATM2 IQPICs8.4 7.5 6.2 PB-2OC12-ATM2-MM ATM2 OC12/STM4 IQPICs(M320 Router) on page 302-port8.4 7.5 6.2 PB-2OC12-ATM2-SMIRATM2 OC12/STM4 IQPICs (M320 Router) onpage 308.4 7.5 7.3 PB-1OC48-ATM2-SFP ATM2 OC48/STM16IQPICwithSFP (M320 Router) on page 331-portChannelized Enhanced IQ(IQE) PICs9.4 PB-4CHOC12-STM4-IQE-SFP Channelized OC12/STM4Enhanced IQ(IQE) PICwith SFP(M320 Router) on page 584-port19 Copyright 2013, Juniper Networks, Inc.M320 PIC/FPC CompatibilityTable 14: M320PIC/FPC Compatibility Type 2 (continued)E-III-FPC2 E-II FPC2 FPC2 Model Number PIC9.4 PB-1CHOC48-STM16-IQE Channelized OC48/STM16Enhanced IQ(IQE) PICwith SFP(M320 Router) on page 631-portEthernet PICs8.4 7.5 6.4 PB-48FE-TX Fast Ethernet PICs (M320Router) on page 89 48-port8.4 7.5 6.4 PB-2GE-SFP Gigabit Ethernet PICs with SFP(M320 Router) on page 922-port8.4 7.5 7.0 PB-4GE-SFP Gigabit Ethernet PICs with SFP(M320 Router) on page 924-portEthernet IQPICs8.4 7.5 6.2 PB-2GE-SFP-QPP Gigabit Ethernet IQPICs withSFP(M320Router) on page 952-portEthernet IQ2 PICs8.4 7.6R2 7.6R2 PB-8GE-TYPE2-SFP-IQ2 Gigabit Ethernet IQ2 PICs withSFP (M320 Router) on page 978-portEthernet Enhanced IQ2 (IQ2E) PICs9.4 9.4 9.4 PB-8GE-TYPE2-SFP-IQ2E Gigabit Ethernet Enhanced IQ2(IQ2E) PICs with SFP (M320Router) on page 101 8-portServices PICs8.4 8.1R2 8.1R2 PB-MS-400-2 Multiservices PICs (M320Router) on page 115 4008.4 7.5 6.3 PB-TUNNEL Tunnel Services PIC (M320Router) on page 149SONET/SDHPICs8.4 8.3 8.3 PB-4OC3-1OC12-SON2-SFP SONET/SDH OC3/STM1(Multi-Rate) PICs with SFP(M320 Router) on page 1214-port8.4 8.3 8.3 PB-4OC3-4OC12-SON-SFP SONET/SDH OC12/STM4(Multi-Rate) PICs with SFP(M320 Router) on page 1274-portCopyright 2013, Juniper Networks, Inc. 20M320 Multiservice Edge Router Interface Module ReferenceTable 14: M320PIC/FPC Compatibility Type 2 (continued)E-III-FPC2 E-II FPC2 FPC2 Model Number PIC8.4 8.3 8.3 PB-1OC48-SON-B-SFP SONET/SDH OC48/STM16(Multi-Rate) PIC with SFP(M320 Router) on page 1381-portPIC/FPC Compatibility (Type 3 FPCs and Type 3 PICs)Table 15 on page 21 provides a PIC/FPC compatibility matrix for the current Type 3 PICsfor the M320router and Type 3 FPCs. Alink to the PICdescription is included in the table.Table 15: M320PIC/FPC Compatibility Type 3E-III-FPC3 E-II-FPC3 FPC3 Model Number PICEthernet PICs8.4 7.5 6.2 PC-10GE-SFP Gigabit Ethernet PICs with SFP(M320 Router) on page 9210-port10-Gigabit Ethernet PICs8.4 7.5 6.2 PC-1XGE-XENPAK 10-Gigabit Ethernet PIC withXENPAK (M320 Router) onpage 111 1port8.4 7.5 7.5 PC-1XGE-DWDM-CBAND 10-Gigabit Ethernet DWDMPIC(M320Router) onpage1131portEthernet IQ2 PICs8.4 8.2 8.2 PC-8GE-TYPE3-SFP-IQ2 Gigabit Ethernet IQ2 PICs withSFP (M320 Router) on page 978port8.4 8.0R3 8.0R3 PC-1GE-TYPE3-XFP-IQ2 Gigabit Ethernet IQ2 PICs withSFP (M320 Router) on page 971portEthernet Enhanced IQ2 (IQ2E) PICs9.4 9.4 9.4 PC-8GE-TYPE3-SFP-IQ2E Gigabit Ethernet Enhanced IQ2(IQ2E) PICs with SFP (M320Router) on page 101 8-port9.4 9.4 9.4 PC-1XGE-TYPE3-XFP-IQ2E 10-Gigabit Ethernet EnhancedIQ2 (IQ2E) PIC with XFP (M320Router) on page 108 1-portServices PICs8.4 8.3 8.3 PC-MS-500-3 Multiservices PICs (M320Router) on page 115 50021 Copyright 2013, Juniper Networks, Inc.M320 PIC/FPC CompatibilityTable 15: M320PIC/FPC Compatibility Type 3 (continued)E-III-FPC3 E-II-FPC3 FPC3 Model Number PIC8.4 7.5 6.3 PC-TUNNEL Tunnel Services PIC (M320Router) on page 149SONET/SDHPICs10.4R2 PC-4OC48-STM16-IQE-SFP SONET/SDH OC48/STM16Enhanced IQ(IQE) PIC with SFP(M320Router) onpage1334-port8.4 7.5 6.2 PC-4OC48-SON-SFP SONET/SDHOC48c/STM16PICswith SFP (M320 Router) onpage 130 4-port8.4 7.5 6.2 PC-1OC192-SON-VSR SONET/SDH OC192c/STM64PIC (M320 Router) on page 1411-port8.4 8.1 8.1 PC-1OC192-SON-SFP SONET/SDHOC192/STM64PICwith XFP (M320 Router) onpage 144 1-portRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 5 M320 FPCs Supported on page 14Copyright 2013, Juniper Networks, Inc. 22M320 Multiservice Edge Router Interface Module ReferenceATM2 DS3 IQPIC (M320Router) Junos OS Release 6.4 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release Four DS3 ports Power requirement: 0.41 A @48 V (20.0 W) Fine-grained queuing per logical interface ATMstandards compliant Model number: PB-4DS3-ATM2Description 16-MB SDRAMmemory for ATMsegmentation and reassembly (SAR) ATMswitch ID Configurable framing options: C-bit with ATMdirect mapping C-bit with Physical Layer Convergence Protocol (PLCP) framing (default) M23 ATMdirect mapping M23 with PLCP framing Internal and loop timingHardware features23 Copyright 2013, Juniper Networks, Inc.ATM2 DS3 IQPIC (M320 Router) Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping Unspecified bit rate (UBR) traffic shaping Fine-grained variable bit rate (VBR) traffic shaping Circuit cross-connect (CCC) ATMInverse Address Resolution Protocol (ARP), which enables routers to automatically learnthe IP address of the router on the far end of an ATMpermanent virtual circuit (PVC) Simple Network Management Protocol (SNMP): Management Information Base (MIB) 2 (RFC 1213) ATMMIB (RFC 1695) SONET MIB AAL5 encapsulations: ATM-VC-MUX ATM-NLPID ATM-Cisco-LLPID ATM-SNAP ATM-CCC-VC-MUXSoftware features 10 ft (3.05 m) posilock SMB to BNC (provided) Four pairs of Rx and Tx coaxial cablesCables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDs Alarmindication signal (AIS) Far-end block error (FEBE) Frame error Idle code Idle received Local and remote loopback Loss of signal (LOS) Out of frame (OOF) Path parity error YellowalarmAlarms, errors, andeventsRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 5Copyright 2013, Juniper Networks, Inc. 24M320 Multiservice Edge Router Interface Module ReferenceATM2 E3 IQPIC (M320Router) Junos OS Release 6.3 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release Four E3 ports Power requirement: 0.41 A @48 V (20 W) Fine-grained queuing per logical interface ATMstandards compliant Model number: PB-2E3-ATM2Description 16-MB SDRAMmemory for ATMsegmentation and reassembly (SAR) ATMswitch ID Configurable framing options: G.751 direct mapping G.751 with PLCP encapsulation (default) G.832 ATMdirect mapping Internal and loop timingHardware features25 Copyright 2013, Juniper Networks, Inc.ATM2 E3 IQPIC (M320 Router) Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping Unspecified bit rate (UBR) traffic shaping Fine-grained variable bit rate (VBR) traffic shaping Circuit cross-connect (CCC) ATMInverse Address Resolution Protocol (ARP), which enables routers to automatically learnthe IP address of the router on the far end of an ATMpermanent virtual circuit (PVC) Simple Network Management Protocol (SNMP): Management Information Base (MIB) 2 (RFC 1213) ATMMIB (RFC 1695) SONET MIB AAL5 encapsulations: ATM-VC-MUX ATM-NLPID ATM-Cisco-LLPID ATM-SNAP ATM-CCC-VC-MUXSoftware features 10 ft (3.05 m) posilock SMB to BNC (provided) Four pairs of Rx and Tx coaxial cablesCables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDs Alarmindication signal (AIS) Frame error Line code violation Local and remote loopback Loss of signal (LOS) Out of frame (OOF) YellowalarmAlarms, errors, andeventsRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 5Copyright 2013, Juniper Networks, Inc. 26M320 Multiservice Edge Router Interface Module ReferenceATM2 OC3/STM1 IQPIC (M320Router) Junos OS Release 6.2 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release Two OC3 ports Power requirement: 0.41 A @48 V (20 W) Fine-grained queuing per logical interface Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1 ATMand SONET/SDH standards compliant Alarmand event counting and detection Compatible with well-known ATMswitches ATMswitch ID, which displays the switch IP address and local interface name of the adjacentFore ATMswitches Model number: PB-2OC3-ATM2-MMPB-2OC3-ATM2-SMIRDescription Single 3010 SAR for segmentation and reassembly into 53 byte ATMcells High-performance parsing of SONET/SDH frames ASIC-basedpacket segmentationandreassembly(SAR) management andoutput port queuing 64 MB SDRAMmemory for ATMSAR Packet buffering, Layer 2 parsingHardware features27 Copyright 2013, Juniper Networks, Inc.ATM2 OC3/STM1 IQPIC (M320 Router) Circuit cross-connect (CCC) for leveraging ATMaccess networks User-configurable virtual circuit (VC) and virtual path (VP) support Support for idle cell or unassigned cell transmission OAMfault management processes alarmindication signal (AIS), remote defect indication(RDI) cells, and loop cells Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP Local and remote loopback ATMInverse Address Resolution Protocol (ARP), which enables routers to automatically learnthe IP address of the router on the far end of an ATMpermanent virtual circuit (PVC) Simple Network Management Protocol (SNMP): Management Information Base (MIB) 2 (RFC 1213) ATMMIB (RFC 1695) SONET MIB Unspecified bit rate (UBR), non-real-time variable bit rate (VBR), and constant bit rate (CBR)traffic shaping Per-VC or per-VP traffic shaping Support for F4 OAMcells Support for 16 bit VCI rangeSoftware features Duplex SC/PC connector (RX and TX) SONET/SDH OC3/STM1 fixed transceivers: Multimode Intermediate reach (IR-1)Optical interface specificationssee SONET/SDH OC3/STM1 Optical Interface SpecificationsCables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDsCopyright 2013, Juniper Networks, Inc. 28M320 Multiservice Edge Router Interface Module Reference Alarmindication signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF) Loss of cell delineation (LOC) Loss of frame (LOF) Loss of pointer (LOP-P) Loss of signal (LOS) Payload mismatch (PLM-P) Payload unequipped (unequipped STS at path level) (UNEQ-P) Remote defect indicationline (RDI-L) Remote defect indicationpath (RDI-P) Error detection: Bit interleaved parity errors B1, B2, B3 Errored seconds (ES-S, ES-L, ES-P) Far-endbit errors, remoteerror indicationline(REI-L), far-endlinecodingviolations(CV-LFE) Far-end bit errors, remote error indicationpath (REI-P), far-end path coding violations(CV-PFE) Far-end errored seconds (ES-LFE, ES-PFE) Far-end severely errored seconds (SES-LFE, SES-PFE) Far-end unavailable seconds (UAS-LFE, UAS-PFE) Severely errored frames (SEF) Severely errored framing seconds (SEFS-S) Severely errored seconds (SES-S, SES-L, SES-P) Unavailable seconds (UAS-L, UAS-P)Alarms, errors, andeventsRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 529 Copyright 2013, Juniper Networks, Inc.ATM2 OC3/STM1 IQPIC (M320 Router)ATM2 OC12/STM4 IQPICs (M320Router)Figure 2: 2-Port ATM2 OC12/STM4 IQPIC Figure 1: 1-Port ATM2 OC12/STM4 IQPIC Junos OS Release 6.2 and later (Type 1 and Type 2)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release One or two OC12 ports Power requirement: 1-port: 0.41 A @48 V (20 W) 2-port: 0.52 A @48 V (25 W) Fine-grained queuing per logical interface Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1 Complies with ATMand SONET/SDH standards Alarmand event counting and detection Compatible with well-known ATMswitches ATMswitch ID, which displays the switch IP address and local interface name of the adjacentFore ATMswitches Model number for 1-Port ATM2 OC12/STM4 IQPIC: PB-1OC12-ATM2-MMPB-1OC12-ATM2-SMIRModel number for 2-Port ATM2 OC12/STM4 IQPIC: PB-2OC12-ATM2-MMPB-2OC12-ATM2-SMIRDescription ATM2 IQ1-port OC12 PICs have one 3010 SAR for segmentation and reassembly into 53-byteATMcells; ATM2 IQ2-port OC12 PICs have dual 3010 SAR High-performance parsing of SONET/SDH frames ASIC-basedpacket segmentationandreassembly(SAR) management andoutput port queuing 64 MB SDRAMmemory for ATMSAR Packet buffering, Layer 2 parsingHardware featuresCopyright 2013, Juniper Networks, Inc. 30M320 Multiservice Edge Router Interface Module Reference Circuit cross-connect for leveraging ATMaccess networks User-configurable virtual circuit (VC) and virtual path (VP) support Support for idle cell or unassigned cell transmission OAMfault management processes alarmindication signal (AIS), remote defect indication(RDI), and loop cells Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP Local and remote loopback ATMInverse ARP, which enables routers to automatically learn the IP address of the router onthe far end of an ATMPVC Simple Network Management Protocol (SNMP): Management Information Base (MIB) 2 (RFC 1213) ATMMIB (RFC 1695) SONET MIB Unspecified bit rate (UBR), non-real-time variable bit rate (VBR), and constant bit rate (CBR)traffic shaping Per-VC or per-VP traffic shaping Support for F4 OAMcells Support for 16-bit VCI rangeSoftware features Duplex SC/PC connector (Rx and Tx) SONET/SDH OC12/STM4 fixed transceivers: Multimode Intermediate reach (IR-1)Optical interface specificationssee SONET/SDH OC12/STM4 Optical Interface SpecificationsCables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDs31 Copyright 2013, Juniper Networks, Inc.ATM2 OC12/STM4 IQPICs (M320 Router) Alarmindication signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF) Loss of cell delineation (LOC) Loss of frame (LOF) Loss of pointer (LOP-P) Loss of signal (LOS) Payload mismatch (PLM-P) Payload unequipped (unequipped STS at path level) (UNEQ-P) Remote defect indicationline (RDI-L) Remote defect indicationpath (RDI-P) Error detection: Bit interleaved parity errors B1, B2, B3 Errored seconds (ES-S, ES-L, ES-P) Far-endbit errors, remoteerror indicationline(REI-L), far-endlinecodingviolations(CV-LFE) Far-end bit errors, remote error indicationpath (REI-P), far-end path coding violations(CV-PFE) Far-end errored seconds (ES-LFE, ES-PFE) Far-end severely errored seconds (SES-LFE, SES-PFE) Far-end unavailable seconds (UAS-LFE, UAS-PFE) Severely errored frames (SEF) Severely errored framing seconds (SEFS-S) Severely errored seconds (SES-S, SES-L, SES-P) Unavailable seconds (UAS-L, UAS-P)Alarms, errors, andeventsRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 5Copyright 2013, Juniper Networks, Inc. 32M320 Multiservice Edge Router Interface Module ReferenceATM2 OC48/STM16 IQPIC with SFP (M320Router) Junos OS Release 7.3 and later (Type 2)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release One OC48 port Power requirement: 0.41 A @48 V ( 20 W) Fine-grained queuing per logical interface Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1 Complies with ATMand SONET/SDH standards Alarmand event counting and detection Compatible with well-known ATMswitches ATMswitch ID, which displays the switch IP address and local interface name of the adjacentFore ATMswitchesDescription ATM2 IQ1-port OC48 PICs have one 3010 SAR for segmentation and reassembly into 53-byteATMcells. High-performance parsing of SONET/SDH frames ASIC-basedpacket segmentationandreassembly(SAR) management andoutput port queuing 64-MB SDRAMmemory for ATMSAR Packet buffering, Layer 2 parsing Model number: PB-1OC48-ATM2-SFPHardware features33 Copyright 2013, Juniper Networks, Inc.ATM2 OC48/STM16 IQPIC with SFP (M320 Router) Multiprotocol Label Switching(MPLS) circuit cross-connect for leveragingATMaccess networks User-configurable virtual circuit (VC) and virtual path (VP) support Support for idle cell or unassigned cell transmission OAMfault management processes alarmindication signal (AIS), remote defect indication(RDI), and loop cells Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP Local and remote loopback ATMInverse ARP, which enables routers to automatically learn the IP address of the router onthe far end of an ATMPVC Simple Network Management Protocol (SNMP): Management Information Base (MIB) 2 (RFC 1213) ATMMIB (RFC 1695) SONET MIB Unspecified bit rate (UBR), non-real-time variable bit rate (VBR), and constant bit rate (CBR)traffic shaping Per-VC or per-VP traffic shaping Support for F4 OAMcells Support for 16-bit VCI rangeSoftware features Duplex LC/PC connector (RX and TX) SONET/SDH OC48/STM16 fiber-optic SFPs: Intermediate reach (IR-1) (model number: SFP-1OC48IR)Optical interfacespecificationsseeSONET/SDHOC48/STM16Optical InterfaceSpecificationsCables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDsCopyright 2013, Juniper Networks, Inc. 34M320 Multiservice Edge Router Interface Module Reference Alarmindication signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF) Loss of cell delineation (LOC) Loss of frame (LOF) Loss of pointer (LOP-P) Loss of signal (LOS) Payload mismatch (PLM-P) Payload unequipped (unequipped STS at path level) (UNEQ-P) Remote defect indicationline (RDI-L) Remote defect indicationpath (RDI-P) Error detection: Bit interleaved parity errors B1, B2, B3 Errored seconds (ES-S, ES-L, ES-P) Far-endbit errors, remoteerror indicationline(REI-L), far-endlinecodingviolations(CV-LFE) Far-end bit errors, remote error indicationpath (REI-P), far-end path coding violations(CV-PFE) Far-end errored seconds (ES-LFE, ES-PFE) Far-end severely errored seconds (SES-LFE, SES-PFE) Far-end unavailable seconds (UAS-LFE, UAS-PFE) Severely errored frames (SEF) Severely errored framing seconds (SEFS-S) Severely errored seconds (SES-S, SES-L, SES-P) Unavailable seconds (UAS-L, UAS-P)Alarms, errors, andeventsRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 535 Copyright 2013, Juniper Networks, Inc.ATM2 OC48/STM16 IQPIC with SFP (M320 Router)Channelized DS3 IQPIC (M320Router) Junos OS Release 6.2 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release Four DS3 ports Power requirement: 0.32 A @48 V (15.6 W) Fine-grained queuing per logical interface Channelization: DS3, DS1, DS0 Model number: PB-4CHDS3-QPPDescription Data service unit (DSU) functionality Subrate and scrambling: Digital Link/Quick Eagle Kentrox Larscom ADTRAN Verilink B3ZS line encoding M13 or C-bit parity Full bit error rate test (BERT) Local and remote loopback testingHardware featuresCopyright 2013, Juniper Networks, Inc. 36M320 Multiservice Edge Router Interface Module Reference Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB Dynamic, arbitrary channel configuration Encapsulations: Circuit cross-connect (CCC) Translational cross-connect (TCC) Frame Relay High-Level Data Link Control (HDLC) Point-to-Point Protocol (PPP)Software features Standard DS3 BNC coaxial cable interfaces Cables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDs Alarmindication signal (AIS) Excessive zeros (EXZ) Far-end block error (FEBE) Frame error Idle code, Idle received Line code violation (LCV) Loss of signal (LOS) Out of frame (OOF) Parity bit (P-bit) disagreements Path parity error Yellowalarmbit (X-bit) disagreementsAlarms, errors, andevents Layer 2 per-queue and per-channel packet and byte counters Instrumentation(counters)RelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 537 Copyright 2013, Juniper Networks, Inc.Channelized DS3 IQPIC (M320 Router)Channelized DS3/E3 Enhanced IQ(IQE) PIC (M320Router)g002620 Junos OS Release 9.3 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release Four E3 or Channelized DS3 ports E3 or Channelized DS3 is configurable on a per-port granularity DS3 channelization: 4 DS3 channels 112 DS1 channels 1011 DS0 channels Power requirement: 0.53 A @48 V (25.4 W) Model number: PB-4CHDS3-E3-IQE-BNCDescription Ports are numbered 0 through 3 top to bottom Hardware featuresSoftware features Maximumtransmission units (MTUs) of up to 9000 bytes Dynamic, arbitrary channel configuration Subrate and scrambling:NOTE: Only DS3 supports subrate and scrambling. Digital Link/Quick Eagle Kentrox Larscom ADTRAN Verilink (subrate: only port A mode)NOTE: For DS3 interfaces, Verilink does not function if an IQE interface is paired with an IQinterface.Copyright 2013, Juniper Networks, Inc. 38M320 Multiservice Edge Router Interface Module Reference Data service unit (DSU) functionality B3ZS line encoding Framing: M13, C-bit parity, framed clear channel Full bit error rate test (BERT) for DS0, DS1, and DS3 ANSI T1.403 FDL Internal and loop clocking for DS3 and DS1 DS3 far end alarmand control (FEAC) channel Local line, remote line, and remote playback loopback testing for each DS3 and DS1 channel Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) Enhancedfine-grainedqueuingper logical interface. SeetheJunos OSClass of Service Libraryfor Routing Devices for more information about class of service features. Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB Encapsulations: Circuit cross-connect (CCC) Translational cross-connect (TCC) Extended Frame Relay for CCC and TCC Flexible Frame Relay Frame Relay Frame Relay for CCC Frame Relay for TCC Frame Relay port CCC High-Level Data Link Control (HDLC) HDLC framing for CCC HDLC framing for TCC MPLS CCC MPLS TCC Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16) Point-to-Point Protocol (PPP) PPP for CCC PPP for TCC Standard DS3 BNC coaxial cable interfaces Cables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDs39 Copyright 2013, Juniper Networks, Inc.Channelized DS3/E3 Enhanced IQ(IQE) PIC (M320 Router) Alarmreporting for error statistics and failure counts DS1 alarms: Alarmindication signal (AIS) Loss of frame (LOF) Remote alarmindication signal (RAIS) DS1 error detection: Bursty errored seconds (BES) CRC errors Errored seconds (ES) Line errored seconds (LES) Loss of framing seconds (LOFS) Loss of signal seconds (LOS) Severely errored seconds (SES) Severely errored framing seconds (SEFS) Unavailable seconds (UAS) DS3 alarms: Alarmindication signal (AIS) Loss of frame (LOF) Loss of signal (LOS) Phase lock loop (PLL) Yellowalarm DS3 error detection: When running bit error rate test (BERT) on 4-port CHDS3/E3 IQE PICs, where DS3/E3 is notSONET/SDH mapped, the LOF is reported and errors can be seen on the remote side. Bothlocal and remote ends are C-bit framed and do not showerrors when the bit error rate testis not running. When the bit error rate test is begun, framing mode on the local interface isset to unframed while the remote interface is still set to C-bit. This behavior is expected the4-port CHDS3/E3IQEPICs sinceAmur Framingdoes not support framedbit error ratetesting. C-bit code violations (CCV) C-bit errored seconds (CES) C-bit severely errored framing seconds (CEFS) CRC errors Excessive zeros (EXZ) Far-end block error (FEBE)Upon initiation of the FEAC loop fromthe local port to the remote port, far-end block errors(FEBEs) are detected in the remote port statistics, this is expected behavior and these errorsshould be suppressed. Far-end receive failure (FERF) Line errored seconds (LES) Parity bit (P-bit) code violations (PCV) Parity bit (P-bit) errored seconds (PES) Parity bit (P-bit) severely errored framing seconds (PSES) Severely errored framing seconds (SEFS) Unavailable seconds (UAS)Alarms, errors, andevents Layer 2 per-queue and per-channel packet and byte counters Instrumentation(counters)Copyright 2013, Juniper Networks, Inc. 40M320 Multiservice Edge Router Interface Module ReferenceRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 541 Copyright 2013, Juniper Networks, Inc.Channelized DS3/E3 Enhanced IQ(IQE) PIC (M320 Router)Channelized E1 IQPIC (M320Router) PB-1OCHE1-RJ48-QPP-N: Junos OS Release 9.1R4, 9.2R3, 9.3R1 and laterFor information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release Ten E1 ports Power requirement: 0.15 A @48 V (7.2 W) Fine-grained queuing per logical interface Channelization: E1, DS0 Model number: PB-10CHE1-RJ48-QPP-NDescription Data service unit (DSU) functionality Ports configurable as clear channel E1 interfaces with 2.048-Mbps connectivity Supports unframed E1 G.703 and G.704 framing modes Supports HDB3 line coding CRC4 configurable Local and remote loopback testingHardware features Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) Simple Network Management Protocol (SNMP): E1 MIB, DS0 MIB Dynamic, arbitrary channel configuration Full bit error rate test (BERT) Encapsulations: Circuit cross-connect (CCC) Translational cross-connect (TCC) Frame Relay High-Level Data Link Control (HDLC) Point-to-Point Protocol (PPP)Software features 120-ohmRJ-48C Cables and connectorsCopyright 2013, Juniper Networks, Inc. 42M320 Multiservice Edge Router Interface Module ReferenceOne bicolor per E1 port: OffPort not enabled GreenPhysical E1 link is up; individual subchannels can be down RedPhysical E1 link is downLEDs Alarmindication signal (AIS) Loss of frame (LOF) Out of frame (OOF) Failed signal rate (FSR)Alarms, errors, andevents Layer 2 per-queue and per-channel packet and byte counters Instrumentation(counters)RelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 543 Copyright 2013, Juniper Networks, Inc.Channelized E1 IQPIC (M320 Router)Channelized OC3/STM1 Circuit Emulation PIC with SFP (M320Router) Junos OS Release 9.4 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release Four OC3/STM1 ports Power requirement: 0.52 A @48 V (25 W) Channelization: DS1Channelization down to E1/T1Each port can be channelized as 84 T1 ports for a total of 336 T1 pseudowires or 63 E1 portsfor a total of 252 pseudowires. Model number: PB-4CHOC3-CE-SFPDescription Subrate and scrambling: Digital Link/Quick Eagle Kentrox Larscom ADTRAN Verilink M13/C-bit parity encoding Local and remote loopback testingHardware featuresCopyright 2013, Juniper Networks, Inc. 44M320 Multiservice Edge Router Interface Module Reference Loop timing and external timing Optical diagnostics AM1 or B8ZS line encoding APS/SDH MSP Fractional mode and framed clear channel mode Superframe (D4/SF) and extended superframe (ESP) framing Simple Network Management Protocol (SNMP): OC3 MIB T1 MIB ATMMIB (Junos OS Release 10.2 and later) Automatic protection switching (APS) Dynamic, arbitrary channel configuration Full bit error rate test (BERT) Encapsulations: Structure-agnostic time-division multiplexing (TDM) over packet (SAToP)(RFC 4553) Pseudowire emulation edge-to-edge (PWE3) for ATM(RFC 4717) (Junos OS Release 9.6 andlater) ATMPseudowire emulation edge-to-edge via dynamic labels (LDP, RSVP-TE) (Junos OSRelease 9.6 and later) Inverse mulitplexing (IMA) for ATM(Junos OS Release 10.0 and later) ATMQoS for the Junos OS Release 10.2 and later: Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping Unspecified bit rate (UBR) traffic shaping Fine-grained real-time variable bit rate (rtVBR) and real-time variable bit rate (nrtVBR)traffic shaping Port-level egress shaping Constant bit rate (CBR) Policing on a per virtual circuit basis Independent peak cell rate (PCR) and sustained cell rate (SCR) policing Counting, tagging, or discard policing actionsSoftware features Duplex LC/PC connector (Rx and Tx) SONET/SDH OC3/STM1 fiber-optic SFPs: Multimode (model number: SFP-OC3-SR) Intermediate reach (IR-1) (model number: SFP-OC3-IR) Long reach (IR-1) (model number: SFP-OC3-LR)Optical interface specificationssee SONET/SDH OC3/STM1 Optical Interface SpecificationsCables and connectors45 Copyright 2013, Juniper Networks, Inc.Channelized OC3/STM1 Circuit Emulation PIC with SFP (M320 Router)OK LED, one tricolor: OffPIC is offline and it is safe to remove it fromthe router. GreenPIC is operating normally. YellowPIC is initializing. RedPIC has an error or failure.APP LED, one bicolor: OffMonitoring application is not running. GreenMonitoring application is running under acceptable load.One tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDsStructure-agnostic alarms for T1 interface: Alarmindication signal (AIS-L, AIS-P) Loss of signal (LOS) Errored seconds (ES) Line-errored seconds (LES) Severely errored seconds (SES) Unavailable errored seconds (UAS) Bipolar violation (BPV) Controlled slip (CS) Line code violation (LCV)Structure-agnostic alarms for E1 interface: Alarmindication signal (AIS-L, AIS-P) Loss of signal (LOS) Errored seconds (ES) Line-errored seconds (LES) Severely errored seconds (SES) Unavailable errored seconds (UAS) Bipolar violation (BPV) Controlled slip (CS) Line code violation (LCV)Alarms, errors, andeventsRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 5Copyright 2013, Juniper Networks, Inc. 46M320 Multiservice Edge Router Interface Module ReferenceChannelized E1/T1 Enhanced IQ(IQE) PIC (M320Router)g004432 Junos OS Release 9.5 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release Ten E1 or T1 ports DS1 and E1 interfaces are selectable on a per-port granularity E1 channelization per PIC: 10 E1 channels 310 DS0 channels T1 channelization per PIC: 10 T1 channels 240 DS0 channels Power requirement: 0.52 A @48 V (24.73 W) Model number: PB-10CHE1-T1-IQE-RJ48Description Top row: 0 and 1 fromleft to right Second row: 2 and 3 fromleft to right Third row: 3 and 4 fromleft to right Bottomrow: 5 and 6 fromleft to rightHardware featuresSoftware features Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service Libraryfor Routing Devices for more information about class of service features. Support sending and receiving in-band loopback codes in both framed and unframed mode: Framed in-band loopback at CSU Framed in-band loopback at Smartjack (ANSI) Unframed in-band loopback at CSU47 Copyright 2013, Juniper Networks, Inc.Channelized E1/T1 Enhanced IQ(IQE) PIC (M320 Router) Unframed in-band loopback at Smartjack (ANSI) You can configure the following framing modes using the CLI: T1SF (D4/superframe), ESF (extended superframe) E1G704, G704no-crc4, unframed Packet buffering, Layer 2 parsing Local line, remote line, and remote payload loopback testing; each channel can be loopedindividually and independently of other channels (DS1/E1 channels) Simple Network Management Protocol (SNMP): T1 MIB (RFC 1406) Dynamic, arbitrary channel configuration Full bit error rate test (BERT) Clocking: internal andloop(clock recoveredfromnetwork anduse for transmit). Internal timingis the default for channelized T1 ports. The external master clock can be a multiple of 2.048MHz or 1.544 MHz for E1 or T1 operation. Line coding: T1CLI configurable as AMI or B8ZS E1HDB3 Encapsulations: Circuit cross-connect (CCC) Translational cross-connect (TCC) Extended Frame Relay for CCC and TCC Flexible Frame Relay Frame Relay Frame Relay for CCC Frame Relay for TCC Frame Relay port CCC High-Level Data Link Control (HDLC) HDLC framing for CCC HDLC framing for TCC MPLS CCC MPLS TCC Point-to-Point Protocol (PPP) PPP for CCC PPP for TCC Encapsulations available only for DS0 and DS1: Multilink Frame Relay end-to-end (MLFR FRF.15) Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16) Multilink PPP (MLPPP) Encapsulations available only for DS1: PPP over Frame Relay 120-ohmRJ-48C connector (female) Cables and connectorsCopyright 2013, Juniper Networks, Inc. 48M320 Multiservice Edge Router Interface Module ReferenceOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDs DS1 alarms: Alarmindication signal (AIS) Loss of frame (LOF) Remote alarmindication signal (RAIS) 24-hour alarmreporting history maintained for error statistics and failure counts, 15-minuteintervals on all errors DS1 error detection: Bursty errored seconds (BES) CRC errors Errored seconds (ES) Line errored seconds (LES) Loss of framing seconds (LOFS) Loss of signal seconds (LOSS) Severely errored seconds (SES) Severely errored framing seconds (SEFS) Unavailable seconds (UAS)Alarms, errors, andevents Layer 2 per-queue and per-channel packet and byte counters Layer 2 per-queue and per-channel packet and byte drop countersInstrumentation(counters)RelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 549 Copyright 2013, Juniper Networks, Inc.Channelized E1/T1 Enhanced IQ(IQE) PIC (M320 Router)Channelized OC3 IQPIC (M320Router) Junos OS Release 7.1 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release One OC3 port Power requirement: 0.39 A @48 V (18.6 W) Fine-grained queuing per logical interface Channelization: DS3, DS1, DS0 Model number: PB-1CHOC3-SMIR-QPPDescription Subrate and scrambling: Digital Link/Quick Eagle Kentrox Larscom ADTRAN Verilink Packet buffering, Layer 2 parsing M13/C-bit parity encoding DS3 far-end alarmand control (FEAC) channel support Local and remote loopback testingHardware featuresCopyright 2013, Juniper Networks, Inc. 50M320 Multiservice Edge Router Interface Module Reference Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB Dynamic, arbitrary channel configuration Full bit error rate test (BERT) Encapsulations: Circuit cross-connect (CCC) Translational cross-connect (TCC) Frame Relay High-Level Data Link Control (HDLC) Point-to-Point Protocol (PPP)Software features Duplex SC/PC connector (Rx and Tx); single-mode fiber intermediate-reach fiber SONET/SDH OC3/STM1 fiber-optic SFPs: Multimode (model number: SFP-OC3-SR) Intermediate reach (IR-1) (model number: SFP-OC3-IR) Long reach (IR-1) (model number: SFP-OC3-LR)Optical interface specificationssee SONET/SDH OC3/STM1 Optical Interface SpecificationsCables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDs51 Copyright 2013, Juniper Networks, Inc.Channelized OC3 IQPIC (M320 Router)Alarms: Alarmindication signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal fail (BERR-SF) Idle code, idle received Loss of frame (LOF) Loss of pointer (LOP-P) Loss of signal (LOS) Out of frame (OOF) Payload mismatch (PLM-P) Payload unequipped (unequipped STS at path level) (UNEQ-P) Parity bit (P-bit) disagreements Path parity error Remote defect indicationline (RDI-L) Remote defect indicationpath (RDI-P) Yellowalarmbit (X-bit) disagreementsError detection: Bit interleaved parity errors B1, B2, B3 (CV-S, CV-L, CV-P) Errored seconds (ES-S, ES-L, ES-P) Far-endbit errors, remote error indicationline (REI-L), far-endline coding violations (CV-LFE) Far-endbit errors, remoteerror indicationpath(REI-P), far-endpathcodingviolations(CV-PFE) Far-end block error (FEBE) Far-end errored seconds (ES-LFE, ES-PFE) Far-end severely errored seconds (SES-LFE, SES-PFE) Far-end unavailable seconds (UAS-LFE, UAS-PFE) Frame error Severely errored frames (SEF) Severely errored framing seconds (SEFS-S) Severely errored seconds (SES-S, SES-L, SES-P) Unavailable seconds (UAS-L, UAS-P)Alarms, errors, andeventsRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 5Copyright 2013, Juniper Networks, Inc. 52M320 Multiservice Edge Router Interface Module ReferenceChannelized OC3/STM1 Enhanced IQ(IQE) PIC with SFP (M320Router) Junos OS Release 9.3 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release Two OC3 or STM1 ports SONET or SDH is configurable on a per-port granularity Channelization: OC3, DS3, DS1, DS0, E3, E1 SONET channelization: 2 OC3 channels 6 DS3 channels 168 DS1 channels 1011 DS0 channels SDH channelization: 2 STM1 channels (non-concatenated) 6 E3 channels 126 E1 channels 6 DS3 channels (Junos OS Release 10.1 and later) 168 DS1 channels (Junos OS Release 10.1 and later) 1011 DS0 channels Power requirement: 0.56 A @48 V (27.1 W) Model number: PB-2CHOC3-STM1-IQE-SFPDescription Ports are numbered 0 and 1 fromleft to right Hardware features53 Copyright 2013, Juniper Networks, Inc.Channelized OC3/STM1 Enhanced IQ(IQE) PIC with SFP (M320 Router) Dynamic, arbitrary channel configuration Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) Enhancedfine-grainedqueuingper logical interface. SeetheJunos Class of ServiceConfigurationGuide for more information about class of service features. Subrate and scrambling: Digital Link/Quick Eagle Kentrox Larscom ADTRAN Verilink Packet buffering, Layer 2 parsing M13/C-bit parity encoding DS3 far-end alarmand control (FEAC) channel support Local line, remote line, and remote payload loopback testing Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB Full bit error rate test (BERT) Encapsulations: Circuit cross-connect (CCC) Translational cross-connect (TCC) Extended Frame Relay for CCC and TCC Flexible Frame Relay Frame Relay Frame Relay for CCC Frame Relay for TCC Frame Relay port CCC High-Level Data Link Control (HDLC) HDLC framing for CCC HDLC framing for TCC MPLS CCC MPLS TCC Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16) Point-to-Point Protocol (PPP) PPP for CCC PPP for TCC Encapsulations available only for DS1: Multilink Frame Relay end-to-end (MLFR FRF.15) Multilink PPP (MLPPP) PPP over Frame RelaySoftware features Duplex LC/PC connector (Rx and Tx) SONET/SDH OC3/STM1 fiber-optic SFPs: Multimode (model number: SFP-OC3-SR) Intermediate reach (IR-1) (model number: SFP-OC3-IR) Long reach (IR-1) (model number: SFP-OC3-LR)Optical interface specificationssee SONET/SDH OC3/STM1 Optical Interface SpecificationsCables and connectorsCopyright 2013, Juniper Networks, Inc. 54M320 Multiservice Edge Router Interface Module ReferenceOne tricolor Status LED per port: OffNot enabled. GreenOnline with no alarms or failures. YellowOnline with alarms for remote failures. RedActive with a local alarm; router has detected a failure.LEDsAlarms, errors, andevents SONET alarms: Alarmindication signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF) Loss of frame (LOF) Loss of light (LOL) Loss of pointer (LOP) Loss of signal (LOS) Payload label mismatch (PLM-P) Remote defect indicationline (RDI-L) Remote defect indicationpath (RDI-P) Remote error indication (REI) Payload unequipped (unequipped STS at path level) (UNEQ-P) Virtual containeralarmindication signal (VAIS) Virtual containerloss of pointer (VLOP) Virtual containermismatch (VMIS) Virtual containerremote defect indication (VRD1) Virtual containerunequipped (VUNEQ) SDH alarms: Administrative unit alarmindication signal (AU-AIS) Bit error rate signal degrade (BERR-SD) Bit error rate signal fail (BERR-SF) Bit interleaved parity (BIP) error B1, B2, B3 Higher order pathalarmindication signal (HP-AIS) Higher order pathfar-end receive failure (HP-FERF) Higher order pathpayload label mismatch (HP-PLM) Higher order pathloss of pointer (HP-LOP) Higher order pathremote defect indication (HP-RDI) Higher order pathunequipped (HP-UNEQ) Loss of frame (LOF) Loss of light (LOL) Loss of signal (LOS) Multiplex sectionalarmindication signal (MS-AIS) Multiplex sectionfar-end receive failure (MS-FERF) Multiplex sectionremote defect indication (MS-RDI) Multiplex sectionremote error indication (MS-REI) Phase lock loop (PLL) Remote error indication (REI) Severely errored frames (SEF)55 Copyright 2013, Juniper Networks, Inc.Channelized OC3/STM1 Enhanced IQ(IQE) PIC with SFP (M320 Router) Tributary unitalarmindication signal (TU-AIS) Tributary unitloss of clock (TU-LOC) Tributary unitloss of pointer (TU-LOP) Tributary unitmismatch (TU-MIS) Tributary unitremote defect indication (TU-RD1) Tributary unitunequipped (TU-UNEQ) DS1 alarms: Alarmindication signal (AIS) Loss of frame (LOF) Remote alarmindication signal (RAIS) DS1 error detection: Bursty errored seconds (BES) CRC errors Errored seconds (ES) Line errored seconds (LES) Loss of framing seconds (LOFS) Loss of signal seconds (LOS) Severely errored seconds (SES) Severely errored framing seconds (SEFS) Unavailable seconds (UAS) DS3 alarms: Alarmindication signal (AIS) Loss of frame (LOF) Loss of signal (LOS) Yellowalarm DS3 error detection: C-bit code violations (CCV) C-bit errored seconds (CES) C-bit severely errored framing seconds (CEFS) CRC errors Excessive zeros (EXZ) Far-end block error (FEBE) Far-end receive failure (FERF) Line errored seconds (LES) Parity bit (P-bit) code violations (PCV) Parity bit (P-bit) errored seconds (PES) Parity bit (P-bit) severely errored framing seconds (PSES) Severely errored framing seconds (SEFS) Unavailable seconds (UAS)RelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15Copyright 2013, Juniper Networks, Inc. 56M320 Multiservice Edge Router Interface Module Reference M320 PICs Supported on page 557 Copyright 2013, Juniper Networks, Inc.Channelized OC3/STM1 Enhanced IQ(IQE) PIC with SFP (M320 Router)Channelized OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320Router)Figure 4: 4-Port IQE PICg004426Figure 3: 1-Port IQE PIC 1-port: Junos OS Release 9.3 and later (Type 1) 4-port: Junos OS Release 9.4 and later (Type 2)For informationonwhichFPCs support these PICs, see M320PIC/FPCCompatibility onpage 15.Software releaseDescription One or four OC12/STM4 ports SONET or SDH is configurable on a per-port granularity SONET channelization (1-port PIC): 1 OC12 channel 4 OC3 channels 12 DS3 channels 336 DS1 channels 1011 DS0 channels SDH channelization (1-port PIC): 1 STM4 channel 4 STM1 channels 12 E3 channels 252 E1 channels 12 DS3 channels (Junos OS Release 10.1 and later) 336 DS1 channels (Junos OS Release 10.1 and later) 1011 DS0 channels SONET channelization (4-port PIC): 4 OC12 channel 16 OC3 channelsCopyright 2013, Juniper Networks, Inc. 58M320 Multiservice Edge Router Interface Module Reference 48 DS3 channels 672 DS1 channels 974 DS0 channels SDH channelization (4-port PIC): 4 STM4 channel 16 STM1 channels 48 E3 channels 504 E1 channels 48 DS3 channels (Junos OS Release 10.1 and later) 672 DS1 channels (Junos OS Release 10.1 and later) 974 DS0 channels Power requirement: 1-port: 0.64 A @48 V (30.7 W) 4-port: 1.08 A @48V (52 W) Model number for 1-Port IQE PIC: PB-1CHOC12-STM4-IQE-SFPModel number for 4-Port IQE PIC: PB-4CHOC12-STM4-IQE-SFP 1-port: Port is numbered 0. 4-port: Ports are numbered: Top row: 2 and 0 fromleft to right Bottomrow: 3 and 1 fromleft to rightHardware featuresSoftware features Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service Libraryfor Routing Devices for more information about class of service features. Subrate and scrambling: Digital Link/Quick Eagle Kentrox Larscom ADTRAN Verilink Packet buffering, Layer 2 parsing M13/C-bit parity encoding DS3 far-end alarmand control (FEAC) channel support Local line, remote line, and remote payload loopback testing Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB Dynamic, arbitrary channel configuration Full bit error rate test (BERT) Encapsulations: Circuit cross-connect (CCC) Translational cross-connect (TCC) Extended Frame Relay for CCC and TCC Flexible Frame Relay Frame Relay Frame Relay for CCC Frame Relay for TCC59 Copyright 2013, Juniper Networks, Inc.Channelized OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320 Router) Frame Relay port CCC High-Level Data Link Control (HDLC) HDLC framing for CCC HDLC framing for TCC MPLS CCC MPLS TCC Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16) Point-to-Point Protocol (PPP) PPP for CCC PPP for TCC Encapsulations available only for DS1: Multilink Frame Relay end-to-end (MLFR FRF.15) Multilink PPP (MLPPP) PPP over Frame Relay Duplex LC/PC connector (Rx and Tx); single-mode fiber SONET/SDH OC12/STM4 fiber-optic SFP transceivers: Short reach (model number: SFP-OC12-SR) Intermediate reach (IR-1) (model number: SFP-OC12-IR) Long reach (LR-1) (model number: SFP-OC12-LR)Optical interface specificationssee SONET/SDH OC12/STM4 Optical Interface SpecificationsCables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDsAlarms, errors, andevents SONET alarms: Alarmindication signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF) Loss of frame (LOF) Loss of light (LOL) Loss of pointer (LOP) Loss of signal (LOS) Payload label mismatch (PLM-P) Remote defect indicationline (RDI-L) Remote defect indicationpath (RDI-P) Remote error indication (REI) Payload unequipped (unequipped STS at path level) (UNEQ-P) Virtual containeralarmindication signal (VAIS) Virtual containerloss of pointer (VLOP) Virtual containermismatch (VMIS) Virtual containerremote defect indication (VRD1)Copyright 2013, Juniper Networks, Inc. 60M320 Multiservice Edge Router Interface Module Reference Virtual containerunequipped (VUNEQ) SDH alarms: Administrative unit alarmindication signal (AU-AIS) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF) Bit interleaved parity (BIP) error B1, B2, B3 Higher order pathalarmindication signal (HP-AIS) Higher order pathfar-end receive failure (HP-FERF) Higher order pathpayload label mismatch (HP-PLM) Higher order pathloss of pointer (HP-LOP) Higher order pathremote defect indication (HP-RDI) Higher order pathunequipped (HP-UNEQ) Loss of frame (LOF) Loss of light (LOL) Loss of signal (LOS) Multiplex sectionalarmindication signal (MS-AIS) Multiplex sectionfar-end receive failure (MS-FERF) Multiplex sectionremote defect indication (MS-RDI) Multiplex sectionremote error indication (MS-REI) Phase lock loop (PLL) Remote error indication (REI) Severely errored frame (SEF) Tributary unitalarmindication signal (TU-AIS) Tributary unitloss of pointer (TU-LOP) Tributary unitmismatch (TU-MIS) Tributary unitremote defect indication (TU-RD1) Tributary unitunequipped (TU-UNEQ) DS1 alarms: Alarmindication signal (AIS) Loss of frame (LOF) Remote alarmindication signal (RAIS) DS1 error detection: Bursty errored seconds (BES) CRC errors Errored seconds (ES) Line errored seconds (LES) Loss of framing seconds (LOFS) Severely errored seconds (SES) Severely errored framing seconds (SEFS) Unavailable seconds (UAS) DS3 alarms: Alarmindication signal (AIS) Loss of frame (LOF) Yellowalarm61 Copyright 2013, Juniper Networks, Inc.Channelized OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320 Router) DS3 error detection: C-bit code violations (CCV) C-bit errored seconds (CES) C-bit severely errored framing seconds (CEFS) CRC errors Excessive zeros (EXZ) Far-end block error (FEBE) Far-end receive failure (FERF) Line errored seconds (LES) Parity bit (P-bit) code violations (PCV) Parity bit (P-bit) errored seconds (PES) Parity bit (P-bit) severely errored framing seconds (PSES) Severely errored framing seconds (SEFS) Unavailable seconds (UAS) Layer 2 per-queue and per-channel packet and byte counters Instrumentation(counters)Table 16: PICs Supported in Fourth Slot of M320-FPC2-E2 and M320-FPC2-E3 with Type 2 IQEPICs on M320RoutersPIC Model Number PIC NamePB-2GE-SFP Gigabit Ethernet, 2-port SFPPB-4GE-SFP Gigabit Ethernet, 4-port SFPPB-2GE-SFP-QPP Gigabit Ethernet IQ, 2-port SFPPB-4OC12-SON-MM SONET/SDH OC12c/STM4, 4-port with multimode transceiversinstalledPB-4OC12SON-SMIR SONET/SDH OC12c/STM4, 4-port with single-mode intermediatereach transceivers installedPB-1OC48SON-SFP SONET/SDH OC48/STM16, 1-port SFPPB-TUNNEL Tunnel ServicesRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 5Copyright 2013, Juniper Networks, Inc. 62M320 Multiservice Edge Router Interface Module ReferenceChannelized OC48/STM16 Enhanced IQ(IQE) PIC with SFP (M320Router) Junos OS Release 9.4 and later (Type 2)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release One OC48/STM16 port SONET or SDH is configurable on a per-port granularity SONET channelization: 4 OC12 channels 16 OC3 channels 48 DS3 channels 672 DS1 channels 975 DS0 channels SDH channelization: 4 STM4 channels 16 STM1 channels 48 E3 channels 504 E1 channels 48 DS3 channels 672 DS1 channels 975 DS0 channels Power requirement: 1.10 A @48V (53 W) Model number: PB-1CHOC48-STM16-IQE-SFPDescription Port is numbered 0. Hardware features63 Copyright 2013, Juniper Networks, Inc.Channelized OC48/STM16 Enhanced IQ(IQE) PIC with SFP (M320 Router) Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) Enhanced fine-grained queuing per logical interface. See the Junos OS Class of Service Libraryfor Routing Devices for more information about class of service features. Subrate and scrambling: Digital Link/Quick Eagle Kentrox Larscom ADTRAN Verilink Packet buffering, Layer 2 parsing M13/C-bit parity encoding DS3 far-end alarmand control (FEAC) channel support Local line, remote line, and remote payload loopback testing Simple Network Management Protocol (SNMP): OC12, OC3 MIB, DS3 MIB, T1 MIB Dynamic, arbitrary channel configuration Full bit error rate test (BERT) Encapsulations: Circuit cross-connect (CCC) Translational cross-connect (TCC) Extended Frame Relay for CCC and TCC Flexible Frame Relay Frame Relay Frame Relay for CCC Frame Relay for TCC Frame Relay port CCC High-Level Data Link Control (HDLC) HDLC framing for CCC HDLC framing for TCC MPLS CCC MPLS TCC Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16) Point-to-Point Protocol (PPP) PPP for CCC PPP for TCC Encapsulations available only for DS1: Multilink Frame Relay end-to-end (MLFR FRF.15) Multilink PPP (MLPPP) PPP over Frame RelaySoftware features Duplex LC connector (Rx and Tx); single-mode fiber SONET/SDH OC48/STM16 fiber-optic SFP transceivers: Short reach (SR-1) (model number: SFP-1OC48-SR) Intermediate reach (IR-1) (model number: SFP-1OC48-IR) Long reach (LR-1) (model number: SFP-1OC48-LR)Optical interfacespecificationsseeSONET/SDHOC48/STM16Optical InterfaceSpecificationsCables and connectorsCopyright 2013, Juniper Networks, Inc. 64M320 Multiservice Edge Router Interface Module ReferenceOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDsAlarms, errors, andevents SONET alarms: Alarmindication signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF) Loss of frame (LOF) Loss of light (LOL) Loss of pointer (LOP) Loss of signal (LOS) Payload label mismatch (PLM-P) Remote defect indicationline (RDI-L) Remote defect indicationpath (RDI-P) Remote error indication (REI) Payload unequipped (unequipped STS at path level) (UNEQ-P) Virtual containeralarmindication signal (VAIS) Virtual containerloss of pointer (VLOP) Virtual containermismatch (VMIS) Virtual containerremote defect indication (VRD1) Virtual containerunequipped (VUNEQ) SDH alarms: Administrative unit alarmindication signal (AU-AIS) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF) Bit interleaved parity (BIP) error B1, B2, B3 Higher order pathalarmindication signal (HP-AIS) Higher order pathfar-end receive failure (HP-FERF) Higher order pathpayload label mismatch (HP-PLM) Higher order pathloss of pointer (HP-LOP) Higher order pathremote defect indication (HP-RDI) Higher order pathunequipped (HP-UNEQ) Loss of frame (LOF) Loss of light (LOL) Loss of signal (LOS) Multiplex sectionalarmindication signal (MS-AIS) Multiplex sectionfar-end receive failure (MS-FERF) Multiplex sectionremote defect indication (MS-RDI) Multiplex sectionremote error indication (MS-REI) Phase lock loop (PLL) Remote error indication (REI) Severely errored frame (SEF) Tributary unitalarmindication signal (TU-AIS)65 Copyright 2013, Juniper Networks, Inc.Channelized OC48/STM16 Enhanced IQ(IQE) PIC with SFP (M320 Router) Tributary unitloss of pointer (TU-LOP) Tributary unitmismatch (TU-MIS) Tributary unitremote defect indication (TU-RD1) Tributary unitunequipped (TU-UNEQ) DS1 alarms: Alarmindication signal (AIS) Loss of frame (LOF) Remote alarmindication signal (RAIS) DS1 error detection: Bursty errored seconds (BES) CRC errors Errored seconds (ES) Line errored seconds (LES) Loss of framing seconds (LOFS) Severely errored seconds (SES) Severely errored framing seconds (SEFS) Unavailable seconds (UAS) DS3 alarms: Alarmindication signal (AIS) Loss of frame (LOF) Yellowalarm DS3 error detection: C-bit code violations (CCV) C-bit errored seconds (CES) C-bit severely errored framing seconds (CEFS) CRC errors Excessive zeros (EXZ) Far-end block error (FEBE) Far-end receive failure (FERF) Line errored seconds (LES) Parity bit (P-bit) code violations (PCV) Parity bit (P-bit) errored seconds (PES) Parity bit (P-bit) severely errored framing seconds (PSES) Severely errored framing seconds (SEFS) Unavailable seconds (UAS) Layer 2 per-queue and per-channel packet and byte counters Instrumentation(counters)Table 17: PICs Supported in Fourth Slot of M320-FPC2-E2 and M320-FPC2-E3 with Type 2 IQEPICs on M320RoutersPIC Model Number PIC NamePB-2GE-SFP Gigabit Ethernet, 2-port SFPPB-4GE-SFP Gigabit Ethernet, 4-port SFPCopyright 2013, Juniper Networks, Inc. 66M320 Multiservice Edge Router Interface Module ReferenceTable 17: PICs Supported in Fourth Slot of M320-FPC2-E2 and M320-FPC2-E3 with Type 2 IQEPICs on M320Routers (continued)PIC Model Number PIC NamePB-2GE-SFP-QPP Gigabit Ethernet IQ, 2-port SFPPB-4OC12-SON-MM SONET/SDH OC12c/STM4, 4-port with multimode transceiversinstalledPB-4OC12-SON-SMIR SONET/SDH OC12c/STM4, 4-port with single-mode intermediatereach transceivers installedPB-1OC48SON-SFP SONET/SDH OC48/STM16, 1-port SFPPB-TUNNEL Tunnel ServicesRelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 567 Copyright 2013, Juniper Networks, Inc.Channelized OC48/STM16 Enhanced IQ(IQE) PIC with SFP (M320 Router)Channelized STM1 IQPIC (M320Router) Junos OS Release 6.2 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15.Software release One STM1 port Power requirement: 0.39 A @48 V (18.6 W) Fine-grained queuing per logical interface Channelization: STM1c, fractional E1, framed and unframed DS0 Model number: PB-1CHSTM1-SMIR-QPPDescription Packet buffering, Layer 2 parsing Local and remote loopback testingHardware features Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) SNMP: SONET/SDH MIB, T1/E1 MIB Dynamic, arbitrary channel configuration Full bit error rate test (BERT) patterns at E1 and DS0 levels Encapsulations: High-Level Data Link Control (HDLC) Frame Relay Circuit cross-connect (CCC) Translational cross-connect (TCC) Point-to-Point Protocol (PPP)Software features Duplex SC/PC connector (Rx and Tx); single-mode intermediate-reach fiber Cables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDsCopyright 2013, Juniper Networks, Inc. 68M320 Multiservice Edge Router Interface Module Reference Alarmindication signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF) Bit interleaved parity errors B1, B2, B3 (CV-S, CV-L, CV-P) Loss of frame (LOF) Loss of pointer (LOP-P) Loss of signal (LOS) Payload mismatch (PLM-P) Payload unequipped (unequipped STS at path level) (UNEQ-P) Remote defect indicationline (RDI-L) Remote defect indicationpath (RDI-P)Error detection: Errored seconds (ES-S, ES-L, ES-P) Far-endbit errors, remote error indicationline (REI-L), far-endline coding violations (CV-LFE) Far-endbit errors, remoteerror indicationpath(REI-P), far-endpathcodingviolations(CV-PFE) Far-end errored seconds (ES-LFE, ES-PFE) Far-end severely errored seconds (SES-LFE, SES-PFE) Far-end unavailable seconds (UAS-LFE, UAS-PFE) Severely errored frames (SEF) Severely errored framing seconds (SEFS-S) Severely errored seconds (SES-S, SES-L, SES-P) Unavailable seconds (UAS-L, UAS-P)Alarms, errors, andevents Layer 2 per-queue and per-channel packet and byte counters Instrumentation(counters)RelatedDocumentationM320 PIC Description on page 3 High Availability Features on page 4 M320 PIC Combination Limitations on page 15 M320 PICs Supported on page 569 Copyright 2013, Juniper Networks, Inc.Channelized STM1 IQPIC (M320 Router)Channelized T1 IQPIC (M320Router)Software release Junos OS Release 7.4 and later (Type 1)For information on which FPCs support this PIC, see M320PIC/FPCCompatibility on page 15. Ten T1 ports Power requirement: 0.15 A @48 V (7.2 W) Fine-grained queuing per logical interface Channelization: T1, FT1, NxDS0 Model number: PB-10CHST1-RJ48-QPPDescriptionCopyright 2013, Juniper Networks, Inc. 70M320 Multiservice Edge Router Interface Module Reference Data service unit (DSU) and channel service unit (CSU) functionality Ports configurable as clear channel T1 interfaces with 1.544-Mbps connectivity Framing: Superframe (SF or D4) and Extended Superframe (ESF) Supports B8ZS (bipolar 8-zero substitution) and AMI (alternate mark inversion) line coding Local, remote, and payload loopback testing ANSI T1.403 loopback support: Respondstoembeddedloopbackcommandsuponreceipt of anFDLcommandfromremoteend with loopup and loopdown at both line and payload level Insertion of loopback commands enables remote CSU/NIU/Smartjack to enter loopbackand loopdown at both the line and payload level (ANSI and Telcordia) Inband loopback support: Responds to inband loopback commands at both the line and payload level (ANSI andTelcordia) Insertion of inband loopback commands at both the line and payload level (ANSI andTelcordia) Clocking support of external (line) and internal Buildout support of the following ranges: 0 through 132 (Line buildout is from1 through 132 feet) 133 through 265 (Line buildout is from133 through 265 feet) 266 through 398 (Line buildout is from266 through 398 feet) 399 through 531 (Line buildout is from399 through 531 feet) 532 through 655 (Line buildout is from532 through 655 feet)Hardware features Quality of service (QoS) per channel: weighted round-robin (WRR), randomearly detection(RED), weighted randomearly detection (WRED) SNMP: T1 MIB and DS0 MIB Dynamic, arbitrary channel configuration Full bit error rate test (BERT) patterns at T1 and DS0 levels Encapsulations: High-Level Data Link Control (HDLC) Frame Relay Circuit cross-connect (CCC) Translational cross-connect (TCC) Point-to-Point Protocol (PPP)Software features 120-ohmRJ-48C connector (female) Cables and connectorsOne tricolor per port: OffNot enabled GreenOnline with no alarms or failures YellowOnline with alarms for remote failures RedActive with a local alarm; router has detected a failureLEDs71 Copyright 2013, Juniper Networks, Inc.Channelized T1 IQPIC (M320 Router)Alarms: Alarmindic