M120 Desiccant Dehumidifier - Munters · PDF fileM120 Desiccant Dehumidifier Product...
Transcript of M120 Desiccant Dehumidifier - Munters · PDF fileM120 Desiccant Dehumidifier Product...
M120
Desiccant Dehumidifier
Product Description
The M120 desiccant dehumidifier is designed to efficientlydehumidify air . Its very compact construction incorporatessections held together by four bolts. The sections contain fans thatare driven by a common motor, a direct gear driven desiccantrotor, and a reactivation airflow heater. The two end casingscontain distribution chambers with isolated sections that provide aprecise balance for dehumidification and reactivation airflows. Itsrugged casing is constructed from corrosion resistant die castaluminium. The electrical control system conforms to EN 60204(IEC204) standards and the electrical components are assembled inthe front compartment. The M120 dehumidifier conforms to bothharmonised European Standards and to CE marking specifications.
Munters Rotor Technology
The desiccant rotor is manufactured from a corrugated compositematerial that is highly effective at attracting and holding watervapour. Every Munters dehumidifier applies a unique rotortechnology. Airflows, air conditions, rotor sections, and rotorrotation speeds are optimised for specific applications. Aninnovative control system maximises the units energy efficiency. Acharacteristic of the M120 rotor technology is an efficient airdistribution chamber which divides the sectors and balances thedehumidification and reactivation airflows.
PRODUCT INFORMATION
M120
Features
- High dehumidification capacitydown to -20°C.
- Robust design.
- Shock and vibration proof.
- Humidity plug with low voltage.
- Requires minimal floor area.
Model M120Diagram measurements are for referenceonly.
Scaled and dimensioned AutoCADdrawings are available in Munters’DryCap program.
B A
DE
D
E
C
Width (A) 425 mm
Depth (B) 481 mm
Height (C) 425 mm
Diam. (D) 100 mm
Diam. (E) 80 mm
Weight 26 kg
Technical Specification
Process airFreeblowing at 50Hz (m³/h) 180Freeblowing at 60Hz (m³/h) 210Rated airflow (m³/h) 120Available static pressure 50Hz (Pa) 200Available static pressure 60Hz (Pa) 360
Reactivation airRated airflow (m³/h) 35Available static pressure (Pa) 100
Total power,voltage and current (amps/phase)Total power(kW) 1,3115V 1-50Hz (A) 10,9115V 1-60Hz (A) 11,6200V 1-50Hz (A) 6,3200V 1-60Hz (A) 6,6220V 1-50Hz (A) 5,7220V 1-60Hz (A) 6,0230V 1-50Hz (A) 5,7230V 1-60Hz (A) 6,0240V 1-50Hz (A) 5,7240V 1-60Hz (A) 6,0
Miscellaneous dataOperating temperature (ºC) -40/+40Max noise level unducted (dBA) 68Air filter standard G3IEC protective class (unit) IP44
IEC protective class (electrical panel) IP44
Dehumidificationcapacity
Approximate capacity in kg/h atdifferent inlet process air relativehumidity, % RH.
Dehumidification capacity, kg/h
0
0,2
0,4
0,6
0,8
1,0
–10 0 10 20 30
60% RH80% RH
40% RH
Process Air Temperature, °C
Options
• Wall bracket• Floor stand• Enhanced filter• Electromechanical humidistat
DH/MEA/PGB-0038--09/04
Sub
ject
to c
hang
e w
ithou
t not
ice.
AUSTRALIATel +61 2 8843 1588
AUSTRIATel +43 1 6164298-0
BELGIUMTel +32 2 240 68 68
BRAZILTel +55 41 3317 5050
CANADATel +1 905 8585894
CHINATel +86 10 804 18000
DENMARKTel +45 4495 3355
FINLANDTel +358 20 776 8230
FRANCETel +33 1 3411 5757
GERMANYTel +49 40-879690-0
INDIATel +91 20 668 18 900
ITALYTel +39 0183 521377
JAPANTel +81 3 5970 0021
KOREATel +82 2 761 8701
MEXICOTel +1 52 722 270-4029
NETHERLANDSTel +31 172 43 32 31
POLANDTel +48 58 305 35 17
SINGAPORETel +65 6744 6828
SOUTH AFRICATel +27 11 997 2000
SPAINTel +34 91 640 09 02
SWEDENTel +46 8-626 6300
SWITZERLANDTel +41 52 3438886
THAILANDTel +66 2 642 2670-3
TURKEYTel +90 262 751 3750
UNIT. ARAB EMIRATESTel +971 4 8809295
UNITED KINGDOMTel +44 1480 432 243
UNITED STATESTel +1 978 241 1100
VIETNAMTel +84 8 825 6838 www.munters.com