LXU800 Userguide

8/9/2019 LXU800 Userguide

1/62

1


2/62


3/62

3

Welcome

Thank you for choosing LXU-800 USB Modem, cutting edge CDMA 1X technology with the data speed of up to153.6 Kbps. You can surf the Internet at high speeds, access e-mails as well as make and receive calls and SMS onthe move.

Package components

CD Quick Quide Ear Phone LXU800

Name of Parts

LED Indicator

EarJack Port

USB Port


4/62

4

How to Plug LXU-800

Please plug LXU-800 into a PC after installing drivers.

1. Pull out the USB connector on the back of the modem. 2. Adjust the USB connector to the desired angle.The USB connector is adjustable to a 45, 90, 135 or180 degree.


5/62

5

1. Installation Windows XP

1. Click the "Next" button to install the LXU800. 2. Select the installation path (it is recommended to usethe default location) and click the "Next" button.


6/62

6


3. Select the Program Folder then click the "Next"button to continue with the installation.

4. Before Installation, please remove the modem thenclick the "Next" button.


7/62

7


6. Push the Next button to install the USB driver.5. Please wait for the Installation to be completed.


8/62

8

7. Push

Install

button to b

gin th

installation. 8. Pl

as

wait

or th

USB driv

r Installation progr

ss.



9/62

9

9. Push

Finish

button to

inish th

USB driv

r installation.


10. Conn

ct your LXU800 Mod

m to th

USB portPl

as

click th

"N

xt" button onc

th

installation o

all3 driv

rs is compl

t

.


10/62

10

11. Push

Finish

button to compl

t

th

installation.



11/62

11


12. After installation, when you start the GUI, the above screenwill be displayed .(At first, you can see Please dial *228 forActivation SOS")


12/62


13/62

13

3. Data Connection & Disconnection

1. To change the Data Connect (Internet) screen, pleaseclick the "Data" icon .

2. To connect the Data (Internet), please click the"Connect" button.

User must create a valid ID, password and numbers(please see 8-1. Data Service Terminal settings)


14/62

14


3.Internet browser will appear once the connection issuccessful.

4. If the Data Connection is properly connected, the"Connected" message will be displayed as above .


15/62

15


5. To disconnect the Data Connection (Internet),click the "Disconnect" button.

6. Click "Yes" to disconnect and "No" to cancel thedisconnection.


16/62

16

4. Voice call Connection & Disconnection

1. For a voice call, click the "Voice" icon. 2. When you click the Voice icon, the above screen willbe displayed with a dial-pad.


17/62

17


Call

End Call

Cancel

Volume (Voice)

-Voice call Menu-

Silent (when in Silent mode)

Tone silent (when voice calling)

Voice mute (when voice calling)

Volume (sound & key tone)


18/62

18


3. To make a voice call, STEP Dial the numbers,STEP Check the numbers, STEP Press call.

4. Calling Screen.


19/62

19


5. Once you are successfully connected to the desirednumber, the screen will change as above.


20/62

20


6. To disconnect the voice call, press the "End"icon.

7. Once you are properly disconnected, the screen willchange as above.


21/62


22/62

22

5. SMS Sending

-SMS Sending Menu-

Add Receiver Number Icon

Clear all Icon

Cancel Icon

Send Icon

Save Icon

3.Please type message here.


23/62

23

5. SMS Sending

4. To send SMS, STEP Type the message, STEP Choose the message type.

5. STEP Type the recipient number, STEP Press the "Send" icon.


24/62

24

5. SMS Sending

6. SMS sending process screen. 7. After sending the SMS, a result window will appearshowing whether it has sent or has failed to send.


25/62


26/62

26

5. SMS Sending

9. Type the desired number and click the "Add" icon toadd more numbers.

10. Once you have entered all the numbers, press the"Confirm" icon to send the message.


27/62

27

5. SMS Sending

11. If you want to search for a number on the device,click the "Search Phonebook" button.

12. Select the appropriate category and browse for thephone number.


28/62

28

6. SMS Receiving

1. When a new SMS is received, the New Messagewindow will appear.

The received SMS will be saved in theReceived SMS inbox.

2. If there are any unread messages, the "Message" iconwill be displayed as above until the message has beenread.


29/62

29

6. SMS Receiving

3. To read the new SMS, click the "SMS Receive"icon The read message is automatically saved.

4. When you read the message, the time andsender information is displayed as above.


30/62


31/62

31

6. SMS Receiving

7. Fill in the information as neededThen press the "Confirm" icon to save.

6. If you wish to save the "Received/Sent number" toyour Phonebook, press the "Save" icon then the screenshown on the right will appear.


32/62

32

6. SMS Receiving

8. You can also directly forward the number (Choosing"From" or "To") to a voice call using the "Call" icon.

9. Calling process screen


33/62

33

6. SMS Receiving

10. When you press the "Forward" icon, the receivedmessage can be sent to another number.

11. Type your desired number to forwardthe message.


34/62

34

6. SMS Receiving

12. If you want to reply to the sender number, choose"From" or To" from the above field then click the "Reply"icon.

13. Type your message on the screen asindicated in "SMS sending.


35/62

35

6. SMS Receiving

14. If you want to delete a single SMS, select the SMS tobe deleted and click the "Delete" button.

15. You can select not only "Received SMS" but also "SentSMS" and "Temp SMS" from the drop-down menu, then simplydelete all selected messages by clicking the "Delete All" icon.


36/62

36

7. Phonebook

1. If you want to add/remove numbers from yourphonebook, click the "Phonebook" icon.

2. When you click the "Phonebook" icon, the Phonebookwindow will appear as above.


37/62

37

7. Phonebook

4.After creating the new GROUP as you Select the GROUP orpush the button , select the GROUP.

3. Select the location in which the list is saved.


38/62

38

7. Phonebook

5. When you want to search the phonebook data, youselect Filter, type the search word in the input windowand then push the search button to get the data you wantto search.

6. If you want to delete all the numbers in a specificgroup at once, select the desired "Group" then click the"Delete All" icon.


39/62

39

7. Phonebook

7. If you want to delete an individual phone number,select the number and click the "Delete" button.

8. If you want to save a new number, click the "Add"Icon icon then enter the new number .

Once you have entered the number, click "Confirm" tosave.


40/62

4

0

7. Phonebook

9. If you want to modify the stored number and details,click the "Modify" button.

10. When you want to make a call from the Phonebook,select the number then click the "Call" icon .


41/62


42/62


43/62

43

8. Settings8-1. Data Service Terminal

The set up steps are as above.

This menu is the part to configure the parameterrelated with data connection and internet browser.

To use Data Service, you must configure as below.

Number : #777

User Name : MDN

Password : MDN

MDN can be found on the Reliance Mobile StartKit you received when activating.

The number should be #777 always.


44/62


45/62

45

8. Settings8-2. SOUND

2. The SMS receiving alarm is set up as above.

This menu is the part to configure the sound*.wav file which is used to alarm when receivingSMS.


46/62

46

8. Settings8-3. SMS


When receiving SMS, this can be set up to checkit from the pop-up window or history list

(Change).

When sending an SMS, if "Delivery Ack" is setto "On", you will get confirmation that the SMShas been received by the receiver.

If you want to delete saved SMS automaticallyafter a certain period, you can specify thedesired period.

This menu is the part to configure theparameter which is related with SMS display andDelivery Ack.


47/62

47

8. Settings8-4. LOCK

1. You can set a Call-Limit "Lock"

The password is set using a 4-digit number.

The set up steps are as above .

This menu is the part to configure the LOCKPassword.


48/62

48

8. Settings8-5. TONE


You can set the length of the button sound toLong/Short.

You can set the connection sound to On/Offwhen sending or receiving calls.

You can set the disconnection sound to On/Offwhen disconnecting from a call.

You can set the ringtone to On/Off when youreceive calls by earphone.

This menu is the part to configure the TONEwhich is related with DTMF, Connect Sound,Disconnect Sound and Earjack Sound.


49/62

49

8. Settings8-6. VOICE


This is the part to configure Auto Answer On (5seconds) / Off.

This is the part to configure Call WaitingActivate / Deactivate.

This is the part to configure Voice call lock andunlock.

This is the part to configure Call Forwardingsetup (if you use this function, calls areforwarded to a set number).

This menu is the part to configure the VOICEenvironment which includes Auto Answer, CallWaiting, Call Forwarding, Call Waiting Forwarding,Voice Privacy and international prefix code.

This is the part to configure Call Waiting &Forwarding feature code(All this feature code isused for Reliance feature code).

This is the part to configure the internationalprefix code.


50/62

50

8. Settings8-7. Others


Banner Setup Default (Reliance) / Custom Ifyou select the "Custom" option, you can enteryour own characters up to 16 digits.

This menu is the part to configureBanner(Default(Reliance), Custom), MobileDirectory Number.

Mobile Directory Number is the number to beused when you using Data Service.

You input the number in the Start Kit whichyou received when activating.


51/62

51

8. Settings8-8. Phonebook


This menu is the part to configure OutlookInformation.(Default setting is e Do not loadf ).

If you click this icon, you can load theOutlook Information without confirmation.

If you click this icon, you can load theOutlook Information with confirmation.

If you click this icon, you can not load theOutlook Information.


52/62


53/62

53

9. Information9-1. USE

2. Refresh Button : refresh the used time and capacity.

Initialize Button : initialize the used time and capacity.

1. Information "Use" tab, you can check your datastatus information as above.


54/62

54

9. Information9-2. Call History

2. Save Button : save the phone number of CallHistory into phonebook.

Call Button : use the phone number in Call Historyto call.

SMS Button : use the phone number in Call Historyto transmit SMS.

1. Information "Detail" tab, you can check yourIncoming, Outgoing and Missed calls and Data usageinformation .

You can connect to Voice Calls and SMS Sending simplyby using the phone number saved in Call History.


55/62

55

9. Information9-3. MODEM

9. Information9-3. MODEM

1. Information "Modem" tab, you can see the modemstatus.

When you click the "Modem Status" button, you cancheck the "Hardware Version", "Firmware Version" and"PRL Versione .


56/62

56

10. Reliance Web Page Connection

1. When your LXU800 is connected to Data, and you would like to connect to the"Zapak" website, click the "Zapak" icon on the GUI screen You will be taken to the"Zapak" website (www.zapak.com) in just one click.


57/62

57

11. About

1. If you click on the "About" icon, you can check themodem information and GUI version as shown on theright.


58/62

58

11. About

3. Once you have entered the information, click the2. If you click the "Information" button, you can registeryour information to the modem as shown on the right.

3. Once you have entered the information, click the"Confirm" icon.


59/62

59

12. Un-Installation Windows XP

1. If you want to uninstall the LXU800 CM program, click e Start ->programs -> LXU800 -> Uninstall LXU800f .

Note: The LXU800 does not need to be connected to the USB port


60/62


61/62

61


4. Please wait for the Uninstallation progress.3. Push e Nextf button to delete driver file.


62/62

62


5. Once uninstallation is complete, select "Yes, I want torestart my computer now" then click "Finishe .

Note: The LXU800 does not need to be connected to the USB port

LXU800 Userguide

Documents

Transcript of LXU800 Userguide