LXML-PWN2 Luxeon Rebel Starboard LED · Philips Lumileds projects that LUXEON Rebel ES products...

LXML-PWN2 Luxeon Rebel Starboard

LED

Opulent Part Number: REBEL-STAR-ES-NW200

Opulent Starboard: MCPCB

Luxeon Rebel LED: LXML-PWN2

Opulent ® YOUR GREENPARTNER

Opulent ®| OP‐REBEL STAR_v4_30Sept09

OP REBEL STAR

1

This is a custom MCPCB structure that further enhances heat

dissipation and thus enabling the LED to last according to its life time.

Higher thermal conductive MCPCB is also available with our special

enhanced capabilities.

Features

Excellent thermal

conductivity

Excellent insulating ability

Excellent Dimensional

Stability

Excellent Mechanical

Strength

Lower heat expansibility

Lower operating

temperature

Increase power density

Reduce the number of

interconnects

Extend the life of dies

OP REBEL STAR

Aluminum Clad Printed

Circuit Board for

Luxeon Rebel allows

optimum heat

dissipation.


Opulent ®| OP‐REBEL STAR_v4_30Sept09

2

CC OO NN SS TT RR UU CC TT II OO NN OO FF MM CC PP CC BB

The structure of the aluminum material includes copper layer, dielectric layer laminated

together with aluminum base layer. Below appends summary of available range of material:

Aluminum Type

Aluminum Thickness

Copper Thickness

Dielectric Thickness

AL 5052

1.5 mm

1 oz

0.100mm

PP AA NN EE LL DD RR AA WW II NN GG


Opulent ®| OP‐REBEL STAR_v4_30Sept09 3

MM AATT EE RR II AA LL DD AATTAA SS HH EE EE TT

Thermal PropertiesThermal Conductivity (Dielectric layer)

1.8 W/m‐k

Thermal Resistance (Dielectric layer)

0.086 ‐in²/W

Maximum Operating Temperature UL 746 125

Glass Transition Temp (Tg) DSC 130

< Tg 21.5

> Tg 22.0

Electrical Properties

Dielectric constant 1kHz/1MHz 4.2 —Dissipation Factor 1kHz/1MHz 0.02 —Volume Resistivity C‐96/40/90 1×108 MΩ∙cm

Surface Resistivity C‐96/40/90 1×107 MΩDielectric Breakdown Voltage A 30 KV/

Mechanical Properties

mm

Dielectric Thickness A 100 μmPeel Strength A 1.05 N/m

Chemical Properties

m

Water absorption D‐24/23 0.09 %

Ratings and DurabilityUL Flammablility 94 V‐0 —Comparative Tracking Index IEC60112 600 V

Thermal stress10 sec @ 288 ,

3 cyclesPass —

Time to delamination 5min @ 260 Pass —

* The data is based on typical values of standard production and should be considered as general information. Our company reserves the right for future changes. It is the responsibility of the user to ensure that the product complies with his requirements.

Unit

x10‐6/

Value

Material Datasheet ‐ OPT111.01.Al5215.4.0018

Coefficient of Thermal Expansion (CTE)

Treatment Condition



PP RR OO DD UU CC TT SS PP EE CC II FF II CC AA TT II OO NN SS

OP REBEL STAR MCPCB

Aluminum Type: AL5052

Aluminum Thickness: 1.5mm

Copper Thickness: 1oz

Dielectric Thickness: 0.1mm

Unit Size: 21.38 x 19.92mm (±0.1mm)

Panel Size: 136.9 x 91.67mm (24pcs/pnl)

Finishing: OSP

Solder Mask: Glossy Black

SOLDER PASTE

Type: Leadfree SAC 305 paste, grade 3 or above

Lumileds Internal: Alpha Metal OM325 grade 4

Alternative: Alpha Metal OM338 grade 3

PACKAGING

One carton consists of 10 internal white boxes. Each white box consists of 3 trays. Each tray consists of 48 pieces.

Type of tray: Individual slot for each OP Rebel Star

Cavity per tray: 48 pcs

Dimension of tray: 44.3cm x 17.25cm x 2.3cm

Internal White Box: contains 3 trays with 1 cover tray (equivalent to 144pcs of OP Rebel)

Dimension of I.W.B: 44.8cm x 17.7cm x 5.5cm

Carton box: contains 10 white boxes (equivalent to 1440pcs of OP Rebel Star)

Dimension of carton: 45.5cm x 36.4cm x 28.5cm



AA BB OO UU TT OO PP UU LL EE NN TT

Opulent (Asia)

Email: sales@opulent‐group.com

Singapore℡: +65 67498188 (Head Office)

eadquartered in Singapore, Opulent has more than 20 years experience in the manufacturing of conventional printed circuit boards (PCBs). Embarking for an international presence, Opulent has set up sales and marketing support in China,

Hong Kong, Germany, Italy, United Kingdom and Malaysia.

HThrough innovation and R&D, Opulent created metal‐clad PCBs (MCPCB) and is currently a leading designer and manufacturer of thermal solutions. Our products and works are guided by a customer centric approach that empowers us to provide value added solutions from design to assembly.

Our customers are well‐known international brands whom have come to trust Opulent for our innovation, our knowledge and our commitment to attain customer satisfaction.

mailto:[email protected]

Features and Benefits• Broadportfolioofemittersforindoorandoutdoorapplications

• CCTandCRIcombinationstosupportawiderangeofapplications

• Highestlumensperwattandlumensperdollar

• Lowestforwardvoltage

• IndustryStandardANSIcolorbinning

• Superior>125lm/Wefficacyenablesefficientandsustainableapplications

• Industryleadinglumenmaintenance

• Completedesignresourcesavailabletosupportyourapplication

development

Key Applications• Outdoor

• Portable

LUXEONRebelESLeading efficacy and light output, maximum design flexibility

Introduction

LUXEONRebelESgivesyoutheflexibilityyouneedfordesigningluminairesandlamps.Testedandbinnedat700mA,confidentlydesignLUXEONRebelESintohighlumenapplicationsorcreatemoreenergyefficientdevicesusingthesameemitter.LuminairemanufacturersanddesignerscountonLUXEONRebelESforquality,reliabilityandin-deviceperformance.

LUXEONRebelESDatasheetDS6120140630©2014PhilipsLumiledsLightingCompany. i

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Pad Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Relative Spectral Distribution vs . Wavelength Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Typical Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Typical Luminous Efficacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Current Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Typical Radiation Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

LUXEON Rebel ES ANSI 1/4th Quadrant Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

LUXEON Rebel ES ANSI 1/4th Quadrant Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

LUXEONRebelESDatasheetDS6120140630©2014PhilipsLumiledsLightingCompany. 2

General Information

Product NomenclatureLUXEONRebelESistestedandbinnedat700mA,withcurrentpulsedurationof20ms.Allcharacteristicchartswherethethermalpadiskeptatconstanttemperature(25°Ctypically)aremeasuredwithcurrentpulsedurationof20ms.Undertheseconditions,junctiontemperatureandthermalpadtemperaturearethesame.TheLUXEONRebelESfamilyofemitterscontainaseriesofLEDsdesignedforIlluminationapplications.ThepartnumberdesignationfortheLXMLseriesisexplainedasfollows:LXML-ABCD

Where:A—designatesradiationpattern(valuePforLambertian)B—designatescolor(WforWhite)C—designatescolorvariant(CforCool-White,NforNeutral-White)D—designatestestcurrent(value2for700mA)

ThepartnumberdesignationfortheLXW8seriesisexplainedasfollows:LXWA-BCDE

Where:A—designatesminimumCRIperformance(value8=80minimumand9=90minimum)B—designatesradiationpattern(valuePforLambertian)C—designatescolor(valueW=White)D&E—designatesnominalANSICCT(value27=2700K,30=3000K,35=3500K,40=4000Kand50=5000K)

ThepartnumberdesignationfortheLXH7seriesisexplainedasfollows:LXHA-BCDE

Where:A—designatesminimumCRIperformance(value7=70minimum)B—designatesradiationpattern(valuePforLambertian)C—designatescolor(valueW=White)D&E—designatesnominalANSICCT(value40=4000K))

Thereforeproductstestedandbinnedat700mAfollowthepartnumberingscheme:LXML-PWx2,LXWx-PWxxandLXH7-PWxx


Average Lumen Maintenance CharacteristicsLumenmaintenanceforsolidstatelightingdevices(LEDs)istypicallydefinedintermsofthepercentageofinitiallightoutputremainingafteraspecifiedperiodoftime.PhilipsLumiledsprojectsthatLUXEONRebelESproductswilldeliver,onaverage,70%lumenmaintenance(L70)at50,000hoursofoperationataforwardcurrentof1000mA.Thisprojectionisbasedonconstantcurrentoperationwithjunctiontemperaturemaintainedatorbelow135°C.Thisperformanceisbasedonindependenttestdata,PhilipsLumiledshistoricaldatafromtestsrunonsimilarmaterialsystems,andinternalLUXEONreliabilitytesting.Observationofdesignlimitsincludedinthisdatasheetisrequiredinordertoachievethisprojectedlumenmaintenance.

Environmental CompliancePhilipsLumiledsiscommittedtoprovidingenvironmentallyfriendlyproductstothesolid-statelightingmarket.LUXEONRebelESiscomplianttotheEuropeanUniondirectivesontherestrictionofhazardoussubstancesinelectronicequipment,namelytheRoHSandREACHdirectives.PhilipsLumiledswillnotintentionallyaddthefollowingrestrictedmaterialstotheLUXEONRebelES:lead,mercury,cadmium,hexavalentchromium,polybrominatedbiphenyls(PBB)orpolybrominateddiphenylethers(PBDE).


Product Selection Guide for LUXEON Rebel ES

Thermal Pad Temperature = 25°C

Table 1.

Performance at Test Current (700mA)

Nominal CCT/Color

Part Number

Minimum CRI

Typical CRI

Min Luminous Flux (lm) [1]

4100KNeutralWhite LXML-PWN2 60 65 200

5650KCoolWhite LXML-PWC2 60 70 200

2700K LXW9-PW27 90 95 120

3000K LXW9-PW30 90 95 140

3500K LXW8-PW35 80 85 160

4000K LXH7-PW40 70 75 180

4000K LXW8-PW40 80 85 170

5000K LXW8-PW50 80 85 180

Note for Table 1:

1. Minimumluminousfluxperformancewithinpublishedoperatingconditions.PhilipsLumiledsmaintainsatoleranceof±6.5%onluminousfluxmeasurementsand±2on

CRImeasurements..

Typical Luminous Flux Characteristics at 350mA, 700mA and 1000mA for LUXEON Rebel ES, Thermal Pad Temperature = 25°C

Table 2.

Nominal CCT/Color

Part Number

Typical Luminous Flux (lm) @ 350mA Forward Current [1]



4100KNeutralWhite LXML-PWN2 130 230 310

5650KCoolWhite LXML-PWC2 135 235 320

2700K LXW9-PW27 75 135 184

3000K LXW9-PW30 81 145 197

3500K LXW8-PW35 103 185 252

4000K LXH7-PW40 114 205 279

4000K LXW8-PW40 106 190 258

5000K LXW8-PW50 111 200 272

Note for Table 2:

1. Typicalluminousfluxperformancewithinpublishedoperatingconditions.PhilipsLumiledsmaintainsatoleranceof±6.5%onluminousfluxmeasurments.


Optical Characteristics for LUXEON Rebel ES at Test Current [1]


Table 3.

Part Number Nominal CCT

Color Temperature CCT Typ Total Included Angle [2]

u0.90V

Typ Viewing Angle [3] 2u 1/2Minimum Typical Maximum

LXML-PWN2 4100KNeutralWhite 3500K 4100K 4500K 160° 120°

LXML-PWC2 5650KCoolWhite 4500K 5650K 10000K 160° 120°

LXW9-PW27 2700K 2580K 2725K 2870K 160° 120°

LXW9-PW30 3000K 2870K 3045K 3220K 160° 120°

LXW8-PW35 3500K 3220K 3465K 3710K 160° 120°

LXH7-PW40 4000K 3710K 3985K 4260K 160° 120°

LXW8-PW40 4000K 3710K 3985K 4260K 160° 120°

LXW8-PW50 5000K 4745K 5028K 5311K 160° 120°

Notes for Table 3:

1. Testcurrentis700mAforallLXML-PWx2,LXWx-PWxxandLXH7-PWxxemitters.

2. Totalangleatwhich90%oftotalluminousfluxiscaptured.

3. Viewingangleistheoffaxisanglefromlampcenterlinewheretheluminousintensityis1/2ofthepeakvalue.


Electrical Characteristics at 700mA for LUXEON Rebel ES


Table 4.

Part Number Nominal CCT/Color

Forward Voltage Vf [1] (V) Typ. Temperature Coefficient

of Forward Voltage [2] (mV/°C) DVf / DTJ

Typical Thermal Resistance

Junction to Thermal Pad (°C/W)

Ru J-C

Minimum Typical Maximum

LXML-PWN2 4100KNeutralWhite 2.5 2.90 3.25 -2.0to-4.0 6

LXML-PWC2 5650KCoolWhite 2.5 2.90 3.25 -2.0to-4.0 6

LXW9-PW27 2700K 2.5 2.90 3.25 -2.0to-4.0 6

LXW9-PW30 3000K 2.5 2.90 3.25 -2.0to-4.0 6

LXW8-PW35 3500K 2.5 2.90 3.25 -2.0to-4.0 6

LXH7-PW40 4000K 2.5 2.90 3.25 -2.0to-4.0 6

LXW8-PW40 4000K 2.5 2.90 3.25 -2.0to-4.0 6

LXW8-PW50 5000K 2.5 2.90 3.25 -2.0to-4.0 6

Notes for Table 4:

1. PhilipsLumiledsmaintainsatoleranceof±0.06Vonforwardvoltagemeasurements.

2. Measuredbetween25°C=TJ=110°CatI

f=700mA.

Typical Electrical Characteristics at 350mA, 700mA and 1000mA for LUXEON Rebel ES


Table 5.

Nominal CCT/Color Part Number

Typical Forward Voltage Vf (V) @ 350mA Forward Current



4100KNeutralWhite LXML-PWN2 2.75 3.00 3.10

5650KCoolWhite LXML-PWC2 2.75 3.00 3.10

2700K LXW9-PW27 2.75 3.00 3.10

3000K LXW9-PW30 2.75 3.00 3.10

3500K LXW8-PW35 2.75 3.00 3.10

4000K LXH7-PW40 2.75 3.00 3.10

4000K LXW8-PW40 2.75 3.00 3.10

5000K LXW8-PW50 2.75 3.00 3.10

Notes for Table 5:

1. PhilipsLumiledsmaintainsatoleranceof±0.06Vonforwardvoltagemeasurements.


Absolute Maximum Ratings

Table 6.

Parameter LUXEON Rebel ES

DCForwardCurrent(mA) 1000[2]

PeakPulsedForwardCurrent(mA) 1200[3]

ESDSensitivity<8000VHumanBodyModel(HBM)

Class3AJESD22-A114-E

LEDJunctionTemperature[1] 150°C

OperatingCaseTemperatureat700mA -40°C-135°C

StorageTemperature -40°C-135°C

SolderingTemperature JEDEC020c260°C

AllowableReflowCycles 3

ReverseVoltage(Vr) LUXEONRebelESLEDsarenotdesignedtobedriveninreversebias

Notes for Table 6:

1. Propercurrentderatingmustbeobservedtomaintainjunctiontemperaturebelowthemaximum.ForadditionalinformationonthermalmeasurementguidelinespleaserefertoApplication

BriefAB33.

2. Residualperiodicvariationsduetopowerconversionfromalternatingcurrent(AC)todirectcurrent(DC),alsocalled“ripple’,withfrequencies≥100Hzandamplitude≤200mAareacceptable,assumingtheaveragecurrentthroughouteachcycledoesnotexceed1000mA.

3. Pulsedoperationwithapeakdrivecurrentof1200mAisacceptableifthepulseon-timeis≤5mspercycleandthedutycycleis≤50%.

JEDEC Moisture SensitivityTable 7.

LevelFloor Life Soak Requirements

Standard

Time Conditions Time Conditions

1 unlimited[30°C/85%RH

168h+5/-0

85°C/85%RH


Reflow Soldering Characteristics

Temperature profile for Table 8.

Table 8.

Profile Feature Lead Free Assembly

AverageRamp-UpRate(TsmaxtoT

p) 3°C/secondmax

PreheatTemperatureMin(Tsmin) 150°C

PreheatTemperatureMax(Tsmax) 200°C

PreheatTime(tsmintots

max) 60-180seconds

Temperature(TL) 217°C

TimeMaintainedAboveTemperature(TL) 60-150seconds

Peak/ClassificationTemperature(TP) 260°C

TimeWithin5°CofActualPeakTemperature(tP) 20-40seconds

Ramp-DownRate 6°C/secondmax

Time25°CtoPeakTemperature 8minutesmax

Notes for Table 8:

1. AlltemperaturesrefertotheapplicationPrintedCircuitBoard(PCB),measuredonthesurfaceadjacenttothepackagebody.

2. ForadditionalinformationonthermalmeasurementguidelinespleaserefertoApplicationBriefAB33.

JEDEC 020c


Mechanical Dimensions

Notes for Figure 1:

1. Donothandlethedevicebythelens—caremustbetakentoavoiddamagetothelensortheinteriorofthedevicethatcanbedamagedbyexcessiveforcetothelens.

2. Drawingsnottoscale.

3. Alldimensionsareinmillimeters.

4. Thethermalpadiselectricallyisolatedfromtheanodeandcathodecontactpads.

Figure 1. Package outline drawing.


Pad Configuration

Note for Figure 2:

1. TheThermalPadiselectricallyisolatedfromtheAnodeandCathodecontactpads.

Solder Pad Design

Notes for Figure 3:

1. ThephotographshowstherecommendedLUXEONRebelESlayoutonPrintedCircuitBoard(PCB).Thisdesigneasilyachievesathermalresistanceof7K/W.

2. ApplicationBriefAB32providesextensivedetailsforthislayout.PrintedCircuitBoardlayoutfiles(.dwg)areavailableatwww.philipslumileds.comandwww.philipslumileds.cn.com.

3

1 2

TOP

3

2 1

BOTTOM 3 THERMAL

2 ANODE

1 CATHODE

PAD FUNCTION

Figure 2. Pad configuration.

Figure 3. Solder pad layout.


Relative Spectral Distribution vs. Wavelength Characteristics

LXML-PWN2 (4100K) Neutral-White at Test Current Thermal Pad Temperature = 25°C

LXML-PWC2 (5650K) Cool-White at Test Current Thermal Pad Temperature = 25°C

0.8

1rib

utio

n

0.4

0.6

0.8

1Sp

ectra

l Pow

er D

istri

butio

n

0

0.2

0.4

0.6

0.8

1

350 400 450 500 550 600 650 700 750 800

Rel

ativ

eS

pect

ral P

ower

Dis

tribu

tion

0

0.2

0.4

0.6

0.8

1

350 400 450 500 550 600 650 700 750 800

Wavelength nm

Rel

ativ

eS

pect

ral P

ower

Dis

tribu

tion

Figure 4. Color spectrum of LXML-PWN2 emitter, integrated measurement.

0.8

1

strib

utio

n

0.4

0.6

0.8

1

Spe

ctra

l Pow

er D

istri

butio

n

0

0.2

0.4

0.6

0.8

1

350 400 450 500 550 600 650 700 750 800

Rel

ativ

eS

pect

ral P

ower

Dis

tribu

tion

0

0.2

0.4

0.6

0.8

1

350 400 450 500 550 600 650 700 750 800

Wavelength nm

Rel

ativ

eS

pect

ral P

ower

Dis

tribu

tion

Figure 5. Color spectrum of LXML-PWC2 emitter, integrated measurement.


LXW9-PW27 (2700K) at Test Current, Thermal Pad Temperature = 25°C


1

0.8

1

on0.6D

istri

butio

0.4

tral P

ower

0.2

ativ

eS

pect

0350 400 450 500 550 600 650 700 750 800

Rel

a

350 400 450 500 550 600 650 700 750 800

Wavelength (nm)

Figure 6. Color spectrum of LXW9-PW27 emitter, integrated measurement.

1

0.8tion

0.6

er D

istri

but

0.4

ectra

l Pow

e

0.2

elat

ive

Spe

0350 400 450 500 550 600 650 700 750 800

Re

Wavelength (nm)




LXH7-PW40 (4000K) at Test Current, Thermal Pad Temperature = 25°C

1

0.8butio

n0.6

ower

Dis

tri

0.4

Spe

ctra

l Po

0.2

Rel

ativ

eS

0350 400 450 500 550 600 650 700 750 800

Wavelength (nm)


1

0.8ion

0.6r Dis

tribu

ti

0.4

ctra

l Pow

e

0.2

lativ

eS

pec

0350 400 450 500 550 600 650 700 750 800

Rel

350 400 450 500 550 600 650 700 750 800

Wavelength (nm)

Figure 9. Color spectrum of LXH7-PW40 emitter, integrated measurement.




1

0.8

utio

n0.6

wer

Dis

tribu

0.4

ectra

l Pow

0.2

elat

ive

Spe

0350 400 450 500 550 600 650 700 750 800

Re

Wavelength (nm)


1

0.8

ribut

ion

0.6

ower

Dis

tr

0.4

Spe

ctra

l Po

0.2

Rel

ativ

eS

0350 400 450 500 550 600 650 700 750 800

Wavelength (nm)



Typical Light Output Characteristics

Typical Relative Luminous Flux Vs. Temperature for LUXEON Rebel ES Emitters at Test Current

Typical Forward Current Characteristics

4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K at Test Current, Thermal Pad Temperature = 25°C

900

1000

700

800

600

700

ent [

mA

]

400

500

war

d C

urre

300Forw

100

200

02.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 3.00 3.05

Forward Voltage [V]

Figure 13. Forward current vs. forward voltage.

1.100

1.200

0.900

1.000

0.700

0.800

ous

Flux

0.500

0.600

ve L

umin

o

0.300

0.400

Rel

ativ

0.100

0.200

0.000-20 0 20 40 60 80 100 120 140

Thermal Pad Temperature [°C]

Figure 12. Relative light output vs. thermal pad temperature.


Typical Luminous Efficacy

Typical Luminous Efficacy Characteristic vs. Forward Current for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters

Typical Relative Luminous Flux vs. Forward Current for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters. Thermal Pad Temperature = 25°C

1 400

1.600

1.200

1.400

acy

1.000

ous

Effic

a

0 600

0.800

ed L

umin

o

0.400

0.600

Nor

mal

ize

0.200

0.0000 100 200 300 400 500 600 700 800 900 1000

Forward Current [mA]

Figure 14. Typical luminous efficacy characteristic vs. forward current, thermal pad temperature = 25°C.

1 400

1.600

1.200

1.400

x

1.000

nous

Flu

x

0 600

0.800

tive

Lum

in

0.400

0.600

Rel

at

0.200

0.0000 100 200 300 400 500 600 700 800 900 1000

Forward Current [mA]

Figure 15. Typical relative luminous flux vs. forward current, thermal pad temperature = 25°C.


Typical Relative Luminous Efficacy vs. Temperature

1.100

1.200

0.900

1.000

cacy

0.700

0.800no

us E

ffic

0.500

0.600

zed

Lum

in

0.300

0.400

Nor

mal

iz

0.100

0.200

0.000-20 0 20 40 60 80 100 120 140

Thermal Pad Temperature [°C]

Figure 16. Relative luminous efficacy vs. thermal pad temperature, test current 700mA.


Current Derating Curves

Current Derating Curves at 350mA Forward Current Operation for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters


800

500

600

700

800

Cur

rent

mA

1 °C/W

200

300

400

500

600

700

800

I F-F

orw

ard

Cur

rent

mA

15°C/W

25°C/W

35°C/W

0

100

200

300

400

500

600

700

800

0 25 50 75 100 125 150 175

I F-F

orw

ard

Cur

rent

mA

TA - Ambient Temperature °C

15°C/W

25°C/W

35°C/W

0

100

200

300

400

500

600

700

800

0 25 50 75 100 125 150 175

I F-F

orw

ard

Cur

rent

mA


15°C/W

25°C/W

35°C/W

Figure 18. Maximum forward current vs. ambient temperature, based on TJMAX = 150°C.

400

200

250

300

350

400

Cur

rent

mA

15°C/W

100

150

200

250

300

350

400

I F-F

orw

ard

Cur

rent

mA

15°C/W

25°C/W

35°C/W

45°C/W

0

50

100

150

200

250

300

350

400

0 25 50 75 100 125 150 175

I F-F

orw

ard

Cur

rent

mA


15°C/W

25°C/W

35°C/W

45°C/W

0

50

100

150

200

250

300

350

400

0 25 50 75 100 125 150 175

I F-F

orw

ard

Cur

rent

mA


15°C/W

25°C/W

35°C/W

45°C/W




1200

600

800

1000

1200ar

d C

urre

nt m

A

200

400

600

800

1000

1200I F

-For

war

d C

urre

nt m

A

15°C/W

25°C/W

0

200

400

600

800

1000

1200

0 25 50 75 100 125 150 175

I F-F

orw

ard

Cur

rent

mA


15°C/W

25°C/W



Typical Radiation Pattern

Typical Spatial Radiation Pattern for 4100K Neutral White, 5650K Cool White, 2700K, 3000K, 3500K, 4000K and 5000K Emitters

80%

90%

100%

50%

60%

70%

80%

90%

100%

ativ

e In

tens

ity

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Rel

ativ

e In

tens

ity

0%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

-90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90

Rel

ativ

e In

tens

ity

Angular Displacement (degrees)

Figure 20. Typical representative spatial radiation pattern for 4100K neutral white,

5650K cool white, 2700K, 3000K 3500K, 4000K and 5000K lambertian.


Emitter Pocket Tape Packaging

100020 50


Emitter Reel Packaging


Product Binning and Labeling

Purpose of Product BinningInthemanufacturingofsemiconductorproducts,thereisavariationofperformancearoundtheaveragevaluesgiveninthetechnicaldatasheets.Forthisreason,PhilipsLumiledsbinstheLEDcomponentsforluminousflux,colorandforwardvoltage(V

f).

Decoding Product Bin LabelingLUXEONRebelESemittersarelabeledusingafourdigitalphanumericcode(CATcode)depictingthebinvaluesforemitterspackagedonasinglereel.Allemitterspackagedwithinareelareofthesame3-variablebincombination.Usingthesecodes,itispossibletodetermineoptimummixingandmatchingofproductsforconsistencyinagivenapplication.

ReelsofLUXEONRebelESemittersarelabeledwithafourdigitalphanumericCATcodefollowingtheformatbelow.ABCD

A = Fluxbin(P,Q,R,Setc.)B&C = Colorbin(W0,V0,U0etc.forLXML-PWx2series.7A,7B,7Cand7DforLXWx-PWxxseries. 5W,5X,5Yand5ZforLXH7-PW40emitter)D = V

fbin(P,R,SandT)


Luminous Flux Bins

Table9liststhestandardphotometricluminousfluxbinsforLUXEONRebelESemitters(testedandbinnedat700mA).

Althoughseveralbinsareoutlined,productavailabilityinaparticularbinvariesbyproductionrunandbyproductperformance.Notallbinsareavailableinallcolors.

Table 9. Flux Bins

Bin Code Min Photometric Flux (lm)

Max Photometric Flux (lm)

P 120 140

Q 140 160

R 160* 180

S 180 200

T 200 220

U 220 240

V 240 260

W 260 280

X 280 300

* 170 lm for LXW8-PW4

BeginninginMarch2013,LUXEONRebelESwilltransitionto10lumenfluxbinsasshowninthetablebelow.Thistransitionmayresultinmixedshipmentsofoldbincodesandnewbincodesduringcalendaryear2013.

Table 10. Flux Bins

Bin Code Min Photometric Flux (lm)

Max Photometric Flux (lm)

1 120 130

2 130 140

3 140 150

4 150 160

5 160 170

6 170 180

7 180 190

8 190 200

9 200 210

A 210 220

B 220 230

C 230 240

D 240 250

E 250 260

F 260 270

G 270 280

H 280 290

J 290 300

K 300 310

L 310 320


4100K Neutral White Bin Structure4100KNeutralWhiteLUXEONRebelESemittersaretestedandbinnedbyx,ycoordinates.12ColorBins,CCTRange3,500Kto4,500K.

Table 11. 4100K Neutral White Bin Coordinates

Bin Code x y Typical CCT (K) Bin Code x y Typical CCT (K)

TM

0.3672940.3859530.3811060.364212

0.4002900.4129950.3937470.382878

4300 S0

0.3782640.3923680.3870710.374075

0.3824580.3909320.3738990.365822

3950

TN

0.3642120.3811060.3782640.362219

0.3828780.3937470.3824580.371616

4300 SP

0.3740750.3870710.3825980.370582

0.3658220.3738990.3595150.351953

3950

T0

0.3622190.3782640.3740750.359401

0.3716160.3824580.3658220.355699

4300 RM

0.4022700.4209400.4147760.396279

0.4227760.4326180.4160970.403508

3650

TP

0.3594010.3740750.3705820.357079

0.3556990.3658220.3519530.342581

4300 RN

0.3962790.4147760.4085930.392368

0.4035080.4160970.3995250.390932

3650

SM

0.3859530.4022700.3962790.381106

0.4129950.4227760.4035080.393747

3950 R0

0.3923680.4085930.4021130.387071

0.3909320.3995250.3821560.373899

3650

SN

0.3811060.3962790.3923680.378264

0.3937470.4035080.3909320.382458

3950 RP

0.3870710.4021130.3965640.382598

0.3738990.3821560.3672840.359515

3650

Note for Table 11:

1. PhilipsLumiledsmaintainsatestertolerenceof±0.005onx,ycolorcoordinates.

0.32

0.34

0.36

0.38

0.40

0.42

0.44

0.33 0.35 0.37 0.39 0.41 0.43

x

y

4500K

4100K

3800K

3500K

TM

SM

RM

RN

R0

RP

SN

S0

SP

TN

T0

TP

blackbody locus

Figure 21. 4100K Neutral White bin structure.


5650K Cool White Bin Structure

0.250.25

0.27

0.29

0.31

0.33

0.35

0.37

0.39

0.41

0.27 0.29 0.31 0.33 0.35 0.37 0.39

x

y

10000K

6300K

5650K

5000K

4500K

7000K

Y0

YA

XM

XN

X0

XP

WM

VM

UM

UN

U0

UP

VN

V0

VP

WN

W0

WP

WQ

blackbody locus

Figure 22. 5650K Cool White bin structure.


5650KCoolWhiteLUXEONRebelESemittersaretestedandbinnedbyx,ycoordinates.19ColorBins,CCTRange4,500Kto10,000K.

Table 12. 5650K Cool White Bin Coordinates

Bin Code x y Typical CCT (K) Bin Code x y Typical CCT (K)

Y0

0.2742380.3030510.3075530.282968

0.3006670.3327080.3107780.283772

8000 WQ

0.3186060.3293930.3295440.319597

0.3102010.3202110.3104950.301303

6000

YA

0.2829680.3075530.3111630.289922

0.2837720.3107780.2931920.270316

8000 VM

0.3286360.3481470.3469040.328823

0.3689520.3856290.3717420.356917

5300

XM

0.3010930.3136170.3147920.303051

0.3422440.3549920.3444380.332708

6700 VN

0.3288230.3469040.3457810.329006

0.3569170.3717420.3591900.345092

5300

XN

0.3030510.3147920.3160420.305170

0.3327080.3444380.3332220.322386

6700 V0

0.3290060.3457810.3444430.329220

0.3450920.3591900.3442320.331331

5300

X0

0.3051700.3160420.3174660.307553

0.3223860.3332220.3204380.310778

6700 VP

0.3292200.3444430.3433520.329393

0.3313310.3442320.3320340.320211

5300

XP

0.3075530.3174660.3195970.311163

0.3107780.3204380.3013030.293192

6700 UM

0.3481470.3672940.3642120.346904

0.3856290.4002900.3828780.371742

4750

WM

0.3136170.3286360.3288230.314792

0.3549920.3689520.3569170.344438

6000 UN

0.3469040.3642120.3622190.345781

0.3717420.3828780.3716160.359190

4750

WN

0.3147920.3288230.3290060.316042

0.3444380.3569170.3450920.333222

6000 U0

0.3457810.3622190.3594010.344443

0.3591900.3716160.3556990.344232

4750

W0

0.3160420.3290060.3292200.317466

0.3332220.3450920.3313310.320438

6000 UP

0.3444430.3594010.3570790.343352

0.3442320.3556990.3425810.332034

4750

WP

0.3174660.3292200.3293930.318606

0.3204380.3313310.3202110.310201

6000

Note for Table 12:



LUXEON Rebel ES ANSI 1/4th Quadrant Color Bin Structure

ANSI 1/4th quadrant color bin structure for LXW9-PW27, LXW9-PW30, LXW8-PW35, LXW8-PW40 and LXW8-PW50 emitters

Figure 23. LUXEON Rebel ES ANSI 1/4th quadrant color bin structure.


LUXEONRebelESemittersaretestedandbinnedbyx,ycoordinates.32ColorBins,CCTRange2580Kto7040K

Table 13. LUXEON Rebel ES ANSI 1/4th quadrant Bin Coordinates

Nominal CCT Bin Code x y Nominal CCT Bin Code x y

2700K 8A

0.4586140.4464700.4373000.448286

0.4103150.4071170.3893000.391847

3500K 6A

0.4082160.3941310.3889000.401706

0.3921530.3848150.3690000.375155

2700K 8B

0.4687320.4562000.4464700.458614

0.4289460.4260000.4071170.410315

3500K 6B

0.4146220.3996000.3941310.408216

0.4089370.4015000.3848150.392153

2700K 8C

0.4813000.4687320.4586140.469954

0.4319000.4289460.4103150.412602

3500K 6C

0.4299000.4146220.4082160.422071

0.4165000.4089370.3921530.398417

2700K 8D

0.4699540.4586140.4482860.459300

0.4126020.4103150.3918470.394400

3500K 6D

0.4220710.4082160.4017060.414700

0.3984170.3921530.3751550.381400

3000K 7A

0.4343920.4220710.4147000.425959

0.4031860.3984170.3814000.385336

4000K 5A

0.3818830.3696550.3670000.378297

0.3776410.3697400.3578000.364637

3000K 7B

0.4429940.4299000.4220710.434392

0.4212300.4165000.3984170.403186

4000K 5B

0.3869550.3736000.3696550.381883

0.3958090.3874000.3697400.377641

3000K 7C

0.4562000.4429940.4343920.446470

0.4260000.4212300.4031860.407117

4000K 5C

0.4006000.3869550.3818830.394131

0.4044000.3958090.3776410.384815

3000K 7D

0.4464700.4343920.4259590.437300

0.4071170.4031860.3853360.389300

4000K 5D

0.3941310.3818830.3782970.389800

0.3848150.3776410.3646370.371600

5000K 3A

0.3447190.3369160.3366000.343985

0.3513010.3448730.3369000.342749

5000K 3B

0.3462600.3376000.3369160.344719

0.3687260.3616000.3448730.351301

5000K 3C

0.3551000.3462600.3447190.352638

0.3760000.3687260.3513010.357500

5000K 3D

0.3526380.3447190.3439850.351500

0.3575000.3513010.3427490.348700

Notes for Table 13:


2. ApplicableforLXW9-PW27,LXW9-PW30,LXW8-PW35,LXW8-PW40andLXW8-PW50emitters.


LUXEON Rebel ES ANSI 1/4th Quadrant Bin Structure

ANSI 1/4th quadrant bin structure for LXH7-PW40 emitter

LUXEONRebelESemittersaretestedandbinnedbyx,ycoordinates.4ColorBins,CCTRange3710Kto4260K

Table 14. LUXEON Rebel ES ANSI 1/4th quadrant Bin Coordinates for LXH7-PW40 emitter

Nominal CCT Bin Code x y

4000K 5W

0.3827500.3703000.3670000.378400

0.3803000.3726000.3578000.364700

4000K 5X

0.3827500.3871000.3736000.370300

0.3803000.3959000.3874000.372600

4000K 5Y

0.3827500.3952000.4006000.387100

0.3803000.3880000.4044000.395900

4000K 5Z

0.3827500.3784000.3898000.395200

0.3803000.3647000.3716000.388000

x

y

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.35 0.37 0.38 0.39 0.40 0.410.36 0.42

3985K±275K

4000K

5Y

5Z

5X

5W

blackbody locus

Figure 24. LUXEON Rebel ES ANSI 1/4th quadrant bin structure (LXH7-PW40 emitter only).


Forward Voltage Bins

Table15listsminimumandmaximumVfbinvaluesperemitter(testedandbinnedat700mA).Althoughseveralbins

areoutlined,productavailabilityinaparticularbinvariesbyproductionrunandbyproductperformance.

Table 15. Vf Bins

Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V)

P 2.50 2.75

R 2.75 3.00

S 3.00 3.25

T 3.25 3.50

RoHSCOMPLIANT

Who We Are

PhilipsLumiledsfocusesononegoal:Creatingtheworld’shighestperformingLEDs.Thecompanypioneeredtheuse

ofsolid-statelightinginbreakthroughproductssuchasthefirstLEDbacklitTV,thefirstLEDflashincameraphones,

andthefirstLEDdaytimerunninglightsforcars.Todayweofferthemostcomprehensiveportfolioofhighquality

LEDsanduncompromisingservice.

PhilipsLumiledsbringsLED’squalitiesofenergyefficiency,digitalcontrolandlonglifetospotlights,downlights,

highbayandlowbaylighting,indoorarealighting,architecturalandspecialtylightingaswellasretrofitlamps.Our

productsareengineeredforoptimallightqualityandunprecedentedefficacyatthelowestoverallcost.Byoffering

LEDsinchip,packagedandmoduleform,wedeliversupplychainflexibilitytotheinventorsofnextgeneration

illumination.

PhilipsLumiledsunderstandsthatsolidstatelightingisnotjustaboutenergyefficiency.Itisaboutelegantdesign.

Reinventingform.Engineeringnewmaterials.Pioneeringmarketsandsimplifyingthesupplychain.It’sabouta

sharedvision.LearnmoreaboutourcomprehensiveportfolioofLEDsatwww .philipslumileds .com.

LUXEONRebelESDatasheetDS6120140630

©2014PhilipsLumiledsLightingCompany.Allrightsreserved.LUXEONisaregisteredtrademarkofthePhilipsLumiledsLightingCompanyintheUnitedStatesandothercountries.

www .philipslumileds .comwww .philipslumileds .cn .com

PhilipsLumiledsLightingCompanyshallnotbeliableforanykindoflossofdataoranyotherdamages,direct,indirectorconsequential,resultingfromtheuseoftheprovidedinformationanddata.AlthoughPhilipsLumiledsLightingCompanyhasattemptedtoprovidethemostaccurateinformationanddata,thematerialsandservicesinformationanddataareprovided“asis”andPhilipsLumiledsLightingCompanyneitherwarranties,norguaranteesthecontentsandcorrectnessoftheprovidedinformationanddata.PhilipsLumiledsLightingCompanyreservestherighttomakechangeswithoutnotice.Youasuseragreetothisdisclaimeranduseragreementwiththedownloadoruseoftheprovidedmaterials,informationanddata.

LXML-PWN2 Luxeon Rebel Starboard LED · Philips Lumileds projects that LUXEON Rebel ES products...

Documents

Transcript of LXML-PWN2 Luxeon Rebel Starboard LED · Philips Lumileds projects that LUXEON Rebel ES products...