LW 300C - Clow Canada

L WCLOW CANADA

REF# DESCRIPTION

1 300C RESTRAINER HALF

2 HEX HEAD BOLT, ZINC PLATED

3 HEX NUT, ZINC PLATED

4 3/4" T‐HEAD BOLT

5 3/4" HEAVY HEX NUT

GLAND RING SUPPLIED BY OTHERS

NOM. PIPE SIZE "A"(2) "B" "C" SHIPPING WT. CLAMPING BOLTS RESTRAINING RODS

4" 9 /8" 1 1/8" 6" 9 lbs 2 @ 5/8" x 3 1/2" 2 @ 3/4"x7" T‐bolt

6" 11 1/8" 1 1/8" 6" 11 lbs 2 @ 5/8" x 4" 2 @ 3/4"x7" T‐bolt

8" 14 5/8" 1 1/4" 6" (8") 17 lbs 2 @ 3/4" x 5" 2 @ 3/4"x9" T‐bolt

10" 16 5/8" 1 3/8" 6" (8") 44 lbs 2 @ 7/8" x 6" 4 @ 3/4"x9" T‐bolt

12" 19 1/4" 1 3/8" 6" (8") 54 lbs 2 @ 7/8" x 6" 4 @ 3/4"x9" T‐bolt

MADE IN CANADA www.clowcanada.com

300C 4" - 12"

RESTRAINEREPOXY COATED FOR PVC PIPE

WITH DUCTILE IRON O.D.FM APPROVED 4" - 12"

CERTIFIED TO UNIBELL B-13-92 AND ASTM FI 674-96

5

2

3

1

4

"A" x TWO

"B"

"C"

L WCLOW CANADA

REF# DESCRIPTION







NOM. PIPE SIZE "A" (2) "B" "C" SHIPPING WT. CLAMPING BOLTS RESTRAINING RODS

4" 9 5/8" 1 1/8" 6" 14 lbs 4 @ 5/8" x 3 1/2" 2 @ 3/4"x7" T‐bolt

6" 12 1/8" 1 1/4" 6" 19 lbs 4 @ 5/8" x 4" 2 @ 3/4"x7" T‐bolt

8" 14 7/8" 1 1/4" 6" (8") 30 lbs 4 @ 3/4" x 5" 2 @ 3/4"x9" T‐bolt

10" 17 3/8" 1 3/8" 44 lbs 4 @ 7/8" x 6" 4 @ 3/4"x9" T‐bolt

12" 20 3/4" 1 3/8" 54 lbs 4 @ 7/8" x 6" 4 @ 3/4"x9" T‐bolt


360C 4" - 12"


WITH DUCTILE IRON O.D.

FM APPROVED 4" - 12"CERTIFIED TO UNIBELL B-13-92 AND ASTM FI 674-96

12

1

2

5

"A" x TWO

"B"

"C"360C 4" / 6" / 8"

L WCLOW CANADA

REF# DESCRIPTION


2 3/4" x 17" LONG THREADED ROD

3 15/16" I.D. x 2 1/4" O.D. FLAT WASHER


5 HEX HEAD BOLT

6 HEX NUT

RESTRAINERS FOR PVC PIPE WITH D.I. OUTSIDE DIAMETER


4" 9 1/8" 1 1/8" 12" 18 lbs 4 @ 5/8" x 3 1/2" 2 @ 3/4"x17" ROD

6" 11 1/8" 1 1/8" 13" 22 lbs 4 @ 5/8" x 4" 2 @ 3/4"x17" ROD

8" 14 5/8" 1 1/4" 15" 34 lbs 4 @ 3/4" x 5" 2 @ 3/4"x17" ROD

10" 16 5/8" 1 3/8" 16" 52 lbs 4 @ 7/8" x 6" 2 @ 3/4"x17" ROD

12" 19 1/4" 1 3/8" 18" 76 lbs 4 @ 7/8" x 6" 2 @ 3/4"x17" ROD


390C4" - 12"




1

2

1

3

4

5

6

"A" x TWO

"C"

"B"

11910 CR 492 • Tyler, Texas 75706 • (800) 527-8478 • www.tylerunion.com • 1501 West 17th Street • Anniston, Alabama 36201 • (800) 226-7601

“A Proven Third Generation Mechanical Joint Restraint”For PVC Pipe

TUF GRIP TLP • PVC PIPE RESTRAINT

Tyler Union’s TUF Grip restraints represent the culmination of 20 years of engineering and testing. As a 3rd generation restraint, TUF Grip is the best available technology in the Waterworks market for use in restraining PVC pipe.

TM

UL Listed & FM Approved

ISO 9001-2000 Registered

Torque Nut

TufGrip™ PVC(TLP)

SPECIFICATIONSDesigned and proven to restrain PVC Pipe 3 inches thru 36 inches in diameter. ¾UL Listed and FM approved for 4 inch thru 12 inch applications ¾Restrains 3 inch thru 12 inch IPS PVC pipe with no modification to the restraint ¾TUF Grip deflection specification is 5° deflection through 12 inch and 3° deflection for 14 inch to 36 inch ¾Cast with tested and traceable ASTM A536 compliant 65-45-12 ductile iron. ¾Wedges are heat treated and hardened to a minimum 370 BHN (Brinel Hardness) ¾Restraint Gland and all components are rated and proven for a 2:1 safety factor based on pipe pressure rating ¾Conforms to applicable requirements of C110/A21.10, C111.A21.11, C153/A21.53, and ASTM F1674-5 ¾Restrains any class of PVC pipe conforming to AWWA C900/905 ¾

FEATURES • ADVANTAGESProven Restraint technology utilizing fewer wedges in frequently applied diameters ¾Fewer wedges equate to less time in the trench and greatly reduced project cost ¾TUF Grip PVC restraints are color coded red for easy recognition ¾Wedges and collar bolts are E-coated for corrosion resistance ¾Single tooth contoured wedges reduce pipe wall stress and eliminate point loading of the pipe ¾PVC wedge design maintains pipe hoop strength integrity ¾TUF Grip restraints utilize curved wedges to prevent flattening of the pipe ¾Collar bolts and wedges pivot providing for stronger engagement of pipe at lower torque (45 to 60 ft. pounds) ¾Wedge Torque nuts twist off within a designed torque range so specialized tools are not required for installation ¾TUF Grip restraints eliminate the need for cumbersome Thrust blocks and Tie-Rods ¾Larger inside diameter of the gland provides for easier installation on out of round pipe ¾Can be used on HDPE and C909 pipe, contact Tyler Union Technical support ¾Suitable for Potable and Wastewater applications ¾Allows for disassembly just like a standard mechanical joint. ¾Designed by Harold Kennedy one of the foremost restraint engineers in the industry today ¾


PVC TUFGrip™ Application ChartSize

(inches)Part

NumberWedge

QuantityT-Bolt

QuantityWeight(lbs.)

Weight(w/Acc.)

PressureRating (psi)

Pipe OD

3 TLP-3 2 4 7.0 11.0 305 3.504 TLP-4 2 4 8.3 12.2 305 4.50-4.806 TLP-6 3 6 12.4 18.3 305 6.63-6.908 TLP-8 3 6 14.9 20.8 305 8.63-9.0510 TLP-10 6 8 25.7 33.4 305 10.75-11.1012 TLP-12 8 8 34.1 42.0 305 12.75-13.2014 TLP-14 10 10 45.1 55.4 235 15.3016 TLP-16 12 12 56.2 68.4 235 17.4018 TLP-18 12 12 62.4 74.8 235 19.5020 TLP-20 14 14 72.9 86.9 235 21.6024 TLP-24 16 16 93.2 109.8 235 25.8030 TLP-30 20 20 251 293 150 32.0036 TLP-36 24 24 281 331 125 38.30

TUFGrip™ MJ Restraint Dimensions Size

(inches) C D E F J K

3 4.08 4.88 6.19 7.67 9.82 3/44 4.93 5.92 7.50 8.98 10.67 7/86 7.03 8.02 9.50 10.98 12.77 7/88 9.18 10.17 11.75 13.23 14.92 7/810 11.23 12.22 14.00 15.70 16.97 7/812 13.33 14.32 16.25 17.95 19.07 7/814 15.44 16.40 18.75 20.43 21.18 7/816 17.54 18.50 21.00 22.88 23.28 7/818 19.64 20.60 23.25 25.43 25.38 7/820 21.74 22.70 25.50 27.50 27.48 7/824 25.94 26.90 30.00 32.00 31.68 7/830 32.18 33.30 36.88 39.42 39.78 1-1/836 38.48 39.60 43.75 46.29 46.08 1-1/8

PVC Pipe Restraint

TM

“Better By Design”


For Ductile Iron Pipe

TUF GRIP TLD • DUCTILE PIPE RESTRAINT

Tyler Union’s TUF Grip restraints represent the culmination of 20 years of engineering and testing. As a 3rd generation restraint, TUF Grip is the best available technology in the Waterworks market for use in restraining Ductile Iron Pipe.

TM


SPECIFICATIONSDesigned and proven to restrain Ductile Iron Pipe 3 inches thru 48 inches in diameter ¾UL approved for 3 inch thru 24 inch applications ¾FM approved for 4 inch thru 12 inch applications ¾Cast with tested and traceable ASTM A536 compliant 65-45-12 ductile iron. ¾TUF Grip deflection specification is 5° deflection through 12 inch and 3° deflection for 14 inch through 48 inch ¾Wedges are heat treated and hardened to a minimum 370 BHN (Brinel Hardness) ¾Restraint Gland and all components are rated and proven for a 2:1 safety factor based on pipe pressure rating ¾Conforms to applicable requirements of ANSI/AWWA C110/A21.10, C111.A21.11, C153/A21.53 ¾Restrains any class of Ductile iron pipe conforming to ANSI/AWWA C151/A21.51 ¾Not recommended for use on Plain end fittings ¾

FEATURES • ADVANTAGES

Proven Restraint technology utilizing fewer wedges in frequently applied diameters ¾Fewer wedges equate to less time in the trench and greatly reduced project cost ¾Wedges and collar bolts are E-coated for corrosion resistance ¾Collar bolts and wedges pivot providing for a stronger engagement of pipe at a lower torque ¾(45 to 60 foot pounds)Wedge Torque nuts twist off within a designed torque range so specialized tools are not required for installation ¾TUF Grip restraints eliminate the need for costly and cumbersome Thrust Blocks and Tie-Rods ¾Larger inside diameter of the gland provides for easier installation on out of round pipe ¾Suitable for Potable and Wastewater applications ¾Allows for disassembly just like a standard mechanical joint ¾TUF Grip Ductile iron restraints are color coded black for easy recognition ¾Designed by Harold Kennedy one of the foremost Restraint Engineers in the industry today ¾

“A Proven Third Generation Mechanical Joint Restraint”

MJ TUFGripTM TLD

Torque Nut





3 4.08 4.88 6.19 7.67 9.82 3/4

4 4.93 5.92 7.50 8.98 10.67 7/8

6 7.03 8.02 9.50 10.98 12.77 7/8

8 9.18 10.17 11.75 13.23 14.92 7/8

10 11.23 12.22 14.00 15.70 16.97 7/8

12 13.33 14.32 16.25 17.95 19.07 7/8

14 15.44 16.40 18.75 20.43 21.18 7/8

16 17.54 18.50 21.00 22.88 23.28 7/8

18 19.64 20.60 23.25 25.43 25.38 7/8

20 21.74 22.70 25.50 27.50 27.48 7/8

24 25.94 26.90 30.00 32.00 31.68 7/8

30 32.18 33.30 36.88 39.42 39.78 1-1/8

36 38.48 39.60 43.75 46.29 46.08 1-1/8

42 44.68 45.80 50.62 53.62 53.08 1-3/8

48 50.98 52.10 57.50 60.50 59.28 1-3/8

Ductile TUFGrip™ Application ChartSize Part Wedge Bolt Weight Glands Weight Pressure Pipe

(inches) Number Quantity Quantity (lbs) (w/ Acc.) Rating (psi) OD3 TLD-3 2 4 6.5 10.5 350 3.96

4 TLD-4 2 4 7.1 11.8 350 4.80

6 TLD-6 3 6 11.2 17.8 350 6.90

8 TLD-8 3 6 13.1 20.3 350 9.05

10 TLD-10 6 8 26.0 32.5 350 11.10

12 TLD-12 8 8 31.5 40.4 350 13.20

14 TLD-14 10 10 43.3 53.6 350 15.30

16 TLD-16 12 12 54.1 66.3 350 17.40

18 TLD-18 12 12 59.8 72.2 250 19.50

20 TLD-20 14 14 69.8 83.8 250 21.60

24 TLD-24 16 16 90.4 106.9 250 25.80

30 TLD-30 20 20 248 290 250 32.00

36 TLD-36 24 24 277 327 250 38.30

42 TLD-42 28 28 448 512 250 44.50

48 TLD-48 32 32 519 597 250 50.80

Ductile Pipe Restraint

TM


Pipe joint Restraints and Flange Adapters

SERIES 90-C ADAPTER FLANGE

Clow Canada's 90 Adapter Flange joins plain-end PVC pipe to liquid and process equipment, valves, compressors, etc. It provides a powertight, rigid flanged connection, allowing easy maintenance (simply loosen bolts and remove flange). When the flange halves are brought together by tightening the clamping bolts, these serrations lock the flange onto the pipe. The exclusive dual seal gasket is then added. Tightening the flange bolts compresses the gasket against the facing flange and down onto the pipe surface, providing a leak proof seal. This product is not designed as a restraining device. If this application is required, the use of a Clow Canada Series 300 restrainer is recommended in conjunction with the Series 90 Flange Adapter.

Material Ductile iron ASTM A536 Grade 65-45-12

Drilling In accordance with ANSI B16.1 - Class 125 and ANSI B16.5 - Class 150

Testing Flanges meet all test requirements of AWWAC-900, ASTM D2241,

ASTM D1599 and ASTM D2992

http://www.clowcanada.com/english/flange_restrainers.html

NOM.

PIPE

SIZE

PVC PIPE

w/D.I.

PIPE O.D.

90C

A

B

B/C

BOLT

HOLE

DIA.

FLANGE BOLTS

NO. SIZE

CLAMPING BOLTS

NO. SIZE

WGT.

APPROX.

(LBS.)

4 4.80 9 1.50 7.50 3/4 8 5/8 x 3 2 5/8 x 3 13.5

6 6.90 11 1.50 9.50 7/8 8 3/4 x 3 1/4 2 5/8 x 3 15.5

8 9.05 13.50 1.88 11.75 7/8 8 3/4 x 3 1/2 2 3/4 x 3 1/2 26

10 11.10 16 2.00 14.25 1 12 7/8 x 3 3/4 2 7/8 x 6 38

12 13.20 19 2.25 17.00 1 12 7/8 x 3 3/4 2 7/8 x 6 54

Dimensions shown in inches unless otherwise noted.

90 Adapter Flange not furnished with flange bolts.

* Not manufactured in this size.

© 2011 Clow Canada, All Rights Reserved

L WCLOW CANADA

REF# DESCRIPTION








4" 9 5/8" 1 1/8" 6" 14 lbs 4 @ 5/8" x 3 1/2" 2 @ 3/4"x7" T‐bolt

6" 12 1/8" 1 1/4" 6" 19 lbs 4 @ 5/8" x 4" 2 @ 3/4"x7" T‐bolt

8" 14 7/8" 1 1/4" 6" (8") 30 lbs 4 @ 3/4" x 5" 2 @ 3/4"x9" T‐bolt

10" 17 3/8" 1 3/8" 44 lbs 4 @ 7/8" x 6" 4 @ 3/4"x9" T‐bolt

12" 20 3/4" 1 3/8" 54 lbs 4 @ 7/8" x 6" 4 @ 3/4"x9" T‐bolt


360C 4" - 12"


WITH DUCTILE IRON O.D.

FM APPROVED 4" - 12"CERTIFIED TO UNIBELL B-13-92 AND ASTM FI 674-96

12

1

2

5

"A" x TWO

"B"

"C"360C 4" / 6" / 8"


For Ductile Iron Pipe

TUF GRIP TLD • DUCTILE PIPE RESTRAINT

Tyler Union’s TUF Grip restraints represent the culmination of 20 years of engineering and testing. As a 3rd generation restraint, TUF Grip is the best available technology in the Waterworks market for use in restraining Ductile Iron Pipe.

TM


SPECIFICATIONSDesigned and proven to restrain Ductile Iron Pipe 3 inches thru 48 inches in diameter ¾UL approved for 3 inch thru 24 inch applications ¾FM approved for 4 inch thru 12 inch applications ¾Cast with tested and traceable ASTM A536 compliant 65-45-12 ductile iron. ¾TUF Grip deflection specification is 5° deflection through 12 inch and 3° deflection for 14 inch through 48 inch ¾Wedges are heat treated and hardened to a minimum 370 BHN (Brinel Hardness) ¾Restraint Gland and all components are rated and proven for a 2:1 safety factor based on pipe pressure rating ¾Conforms to applicable requirements of ANSI/AWWA C110/A21.10, C111.A21.11, C153/A21.53 ¾Restrains any class of Ductile iron pipe conforming to ANSI/AWWA C151/A21.51 ¾Not recommended for use on Plain end fittings ¾

FEATURES • ADVANTAGES

Proven Restraint technology utilizing fewer wedges in frequently applied diameters ¾Fewer wedges equate to less time in the trench and greatly reduced project cost ¾Wedges and collar bolts are E-coated for corrosion resistance ¾Collar bolts and wedges pivot providing for a stronger engagement of pipe at a lower torque ¾(45 to 60 foot pounds)Wedge Torque nuts twist off within a designed torque range so specialized tools are not required for installation ¾TUF Grip restraints eliminate the need for costly and cumbersome Thrust Blocks and Tie-Rods ¾Larger inside diameter of the gland provides for easier installation on out of round pipe ¾Suitable for Potable and Wastewater applications ¾Allows for disassembly just like a standard mechanical joint ¾TUF Grip Ductile iron restraints are color coded black for easy recognition ¾Designed by Harold Kennedy one of the foremost Restraint Engineers in the industry today ¾

“A Proven Third Generation Mechanical Joint Restraint”

MJ TUFGripTM TLD

Torque Nut





3 4.08 4.88 6.19 7.67 9.82 3/4

4 4.93 5.92 7.50 8.98 10.67 7/8

6 7.03 8.02 9.50 10.98 12.77 7/8

8 9.18 10.17 11.75 13.23 14.92 7/8

10 11.23 12.22 14.00 15.70 16.97 7/8

12 13.33 14.32 16.25 17.95 19.07 7/8

14 15.44 16.40 18.75 20.43 21.18 7/8

16 17.54 18.50 21.00 22.88 23.28 7/8

18 19.64 20.60 23.25 25.43 25.38 7/8

20 21.74 22.70 25.50 27.50 27.48 7/8

24 25.94 26.90 30.00 32.00 31.68 7/8

30 32.18 33.30 36.88 39.42 39.78 1-1/8

36 38.48 39.60 43.75 46.29 46.08 1-1/8

42 44.68 45.80 50.62 53.62 53.08 1-3/8

48 50.98 52.10 57.50 60.50 59.28 1-3/8

Ductile TUFGrip™ Application ChartSize Part Wedge Bolt Weight Glands Weight Pressure Pipe

(inches) Number Quantity Quantity (lbs) (w/ Acc.) Rating (psi) OD3 TLD-3 2 4 6.5 10.5 350 3.96

4 TLD-4 2 4 7.1 11.8 350 4.80

6 TLD-6 3 6 11.2 17.8 350 6.90

8 TLD-8 3 6 13.1 20.3 350 9.05

10 TLD-10 6 8 26.0 32.5 350 11.10

12 TLD-12 8 8 31.5 40.4 350 13.20

14 TLD-14 10 10 43.3 53.6 350 15.30

16 TLD-16 12 12 54.1 66.3 350 17.40

18 TLD-18 12 12 59.8 72.2 250 19.50

20 TLD-20 14 14 69.8 83.8 250 21.60

24 TLD-24 16 16 90.4 106.9 250 25.80

30 TLD-30 20 20 248 290 250 32.00

36 TLD-36 24 24 277 327 250 38.30

42 TLD-42 28 28 448 512 250 44.50

48 TLD-48 32 32 519 597 250 50.80

Ductile Pipe Restraint

TM



“A Proven Third Generation Mechanical Joint Restraint”For PVC Pipe

TUF GRIP TLP • PVC PIPE RESTRAINT

Tyler Union’s TUF Grip restraints represent the culmination of 20 years of engineering and testing. As a 3rd generation restraint, TUF Grip is the best available technology in the Waterworks market for use in restraining PVC pipe.

TM



Torque Nut

TufGrip™ PVC(TLP)

SPECIFICATIONSDesigned and proven to restrain PVC Pipe 3 inches thru 36 inches in diameter. ¾UL Listed and FM approved for 4 inch thru 12 inch applications ¾Restrains 3 inch thru 12 inch IPS PVC pipe with no modification to the restraint ¾TUF Grip deflection specification is 5° deflection through 12 inch and 3° deflection for 14 inch to 36 inch ¾Cast with tested and traceable ASTM A536 compliant 65-45-12 ductile iron. ¾Wedges are heat treated and hardened to a minimum 370 BHN (Brinel Hardness) ¾Restraint Gland and all components are rated and proven for a 2:1 safety factor based on pipe pressure rating ¾Conforms to applicable requirements of C110/A21.10, C111.A21.11, C153/A21.53, and ASTM F1674-5 ¾Restrains any class of PVC pipe conforming to AWWA C900/905 ¾

FEATURES • ADVANTAGESProven Restraint technology utilizing fewer wedges in frequently applied diameters ¾Fewer wedges equate to less time in the trench and greatly reduced project cost ¾TUF Grip PVC restraints are color coded red for easy recognition ¾Wedges and collar bolts are E-coated for corrosion resistance ¾Single tooth contoured wedges reduce pipe wall stress and eliminate point loading of the pipe ¾PVC wedge design maintains pipe hoop strength integrity ¾TUF Grip restraints utilize curved wedges to prevent flattening of the pipe ¾Collar bolts and wedges pivot providing for stronger engagement of pipe at lower torque (45 to 60 ft. pounds) ¾Wedge Torque nuts twist off within a designed torque range so specialized tools are not required for installation ¾TUF Grip restraints eliminate the need for cumbersome Thrust blocks and Tie-Rods ¾Larger inside diameter of the gland provides for easier installation on out of round pipe ¾Can be used on HDPE and C909 pipe, contact Tyler Union Technical support ¾Suitable for Potable and Wastewater applications ¾Allows for disassembly just like a standard mechanical joint. ¾Designed by Harold Kennedy one of the foremost restraint engineers in the industry today ¾


PVC TUFGrip™ Application ChartSize

(inches)Part

NumberWedge

QuantityT-Bolt

QuantityWeight(lbs.)

Weight(w/Acc.)

PressureRating (psi)

Pipe OD

3 TLP-3 2 4 7.0 11.0 305 3.504 TLP-4 2 4 8.3 12.2 305 4.50-4.806 TLP-6 3 6 12.4 18.3 305 6.63-6.908 TLP-8 3 6 14.9 20.8 305 8.63-9.0510 TLP-10 6 8 25.7 33.4 305 10.75-11.1012 TLP-12 8 8 34.1 42.0 305 12.75-13.2014 TLP-14 10 10 45.1 55.4 235 15.3016 TLP-16 12 12 56.2 68.4 235 17.4018 TLP-18 12 12 62.4 74.8 235 19.5020 TLP-20 14 14 72.9 86.9 235 21.6024 TLP-24 16 16 93.2 109.8 235 25.8030 TLP-30 20 20 251 293 150 32.0036 TLP-36 24 24 281 331 125 38.30



3 4.08 4.88 6.19 7.67 9.82 3/44 4.93 5.92 7.50 8.98 10.67 7/86 7.03 8.02 9.50 10.98 12.77 7/88 9.18 10.17 11.75 13.23 14.92 7/810 11.23 12.22 14.00 15.70 16.97 7/812 13.33 14.32 16.25 17.95 19.07 7/814 15.44 16.40 18.75 20.43 21.18 7/816 17.54 18.50 21.00 22.88 23.28 7/818 19.64 20.60 23.25 25.43 25.38 7/820 21.74 22.70 25.50 27.50 27.48 7/824 25.94 26.90 30.00 32.00 31.68 7/830 32.18 33.30 36.88 39.42 39.78 1-1/836 38.48 39.60 43.75 46.29 46.08 1-1/8

PVC Pipe Restraint

TM


L WCLOW CANADA

REF# DESCRIPTION






GLAND RING SUPPLIED BY OTHERS

NOM. PIPE SIZE "A"(2) "B" "C" SHIPPING WT. CLAMPING BOLTS RESTRAINING RODS

4" 9 /8" 1 1/8" 6" 9 lbs 2 @ 5/8" x 3 1/2" 2 @ 3/4"x7" T‐bolt

6" 11 1/8" 1 1/8" 6" 11 lbs 2 @ 5/8" x 4" 2 @ 3/4"x7" T‐bolt

8" 14 5/8" 1 1/4" 6" (8") 17 lbs 2 @ 3/4" x 5" 2 @ 3/4"x9" T‐bolt

10" 16 5/8" 1 3/8" 6" (8") 44 lbs 2 @ 7/8" x 6" 4 @ 3/4"x9" T‐bolt

12" 19 1/4" 1 3/8" 6" (8") 54 lbs 2 @ 7/8" x 6" 4 @ 3/4"x9" T‐bolt


300C 4" - 12"




5

2

3

1

4

"A" x TWO

"B"

"C"

L WCLOW CANADA

REF# DESCRIPTION


2 3/4" x 17" LONG THREADED ROD

3 15/16" I.D. x 2 1/4" O.D. FLAT WASHER


5 HEX HEAD BOLT

6 HEX NUT

RESTRAINERS FOR PVC PIPE WITH D.I. OUTSIDE DIAMETER


4" 9 1/8" 1 1/8" 12" 18 lbs 4 @ 5/8" x 3 1/2" 2 @ 3/4"x17" ROD

6" 11 1/8" 1 1/8" 13" 22 lbs 4 @ 5/8" x 4" 2 @ 3/4"x17" ROD

8" 14 5/8" 1 1/4" 15" 34 lbs 4 @ 3/4" x 5" 2 @ 3/4"x17" ROD

10" 16 5/8" 1 3/8" 16" 52 lbs 4 @ 7/8" x 6" 2 @ 3/4"x17" ROD

12" 19 1/4" 1 3/8" 18" 76 lbs 4 @ 7/8" x 6" 2 @ 3/4"x17" ROD


390C4" - 12"




1

2

1

3

4

5

6

"A" x TWO

"C"

"B"


SERIES 90-C ADAPTER FLANGE

Clow Canada's 90 Adapter Flange joins plain-end PVC pipe to liquid and process equipment, valves, compressors, etc. It provides a powertight, rigid flanged connection, allowing easy maintenance (simply loosen bolts and remove flange). When the flange halves are brought together by tightening the clamping bolts, these serrations lock the flange onto the pipe. The exclusive dual seal gasket is then added. Tightening the flange bolts compresses the gasket against the facing flange and down onto the pipe surface, providing a leak proof seal. This product is not designed as a restraining device. If this application is required, the use of a Clow Canada Series 300 restrainer is recommended in conjunction with the Series 90 Flange Adapter.

Material Ductile iron ASTM A536 Grade 65-45-12

Drilling In accordance with ANSI B16.1 - Class 125 and ANSI B16.5 - Class 150

Testing Flanges meet all test requirements of AWWAC-900, ASTM D2241,

ASTM D1599 and ASTM D2992

http://www.clowcanada.com/english/flange_restrainers.html

NOM.

PIPE

SIZE

PVC PIPE

w/D.I.

PIPE O.D.

90C

A

B

B/C

BOLT

HOLE

DIA.

FLANGE BOLTS

NO. SIZE

CLAMPING BOLTS

NO. SIZE

WGT.

APPROX.

(LBS.)

4 4.80 9 1.50 7.50 3/4 8 5/8 x 3 2 5/8 x 3 13.5

6 6.90 11 1.50 9.50 7/8 8 3/4 x 3 1/4 2 5/8 x 3 15.5

8 9.05 13.50 1.88 11.75 7/8 8 3/4 x 3 1/2 2 3/4 x 3 1/2 26

10 11.10 16 2.00 14.25 1 12 7/8 x 3 3/4 2 7/8 x 6 38

12 13.20 19 2.25 17.00 1 12 7/8 x 3 3/4 2 7/8 x 6 54

Dimensions shown in inches unless otherwise noted.

90 Adapter Flange not furnished with flange bolts.

* Not manufactured in this size.



SERIES 40 UNION FLANGE

An economical, practical and reliable alternative to welded and screwed systems, Clow canada's Union Flange joins plain-ended pipe to flange-ended equipment, fittings and valves (not recommended for PVC pipe; better alternative is Clow Canada's Series 90 Adapter Flange). On-site installation is simple: a wrench is the only tool required. The Union Flange is a unique solution to the problems which can occur in the use of pre-fabricated flanged piping, such as downtime, reliance on off-site suppliers and inaccurate dimensions. The design of the Union Flange comprises three elements: the flange, the gasket and the set screws. The flange is manufactured from ductile iron, which is stronger than the usual grey iron threaded flange, to avoid breakage upon impact or from overtightening of bolts. The gasket used is the standard mechanical joint gasket, proven reliable in over 40 years of service. A set screw locking device provides the restraint connection to the pipe. This device resembles those used in mechanical joint retainer glands, hundreds of thousands of which are in use worldwide, replacing concrete thrust blocks and other restraining devices.

Clow Canada's Union Flange has been successful in numerous municipal and industrial applications such as fire protection, water and wastewater, and process piping systems.

http://www.clowcanada.com/english/flange_series90.html

Advantages of Clow's Union Flange

Easy to Install no skilled labour or special equipment required

Efficient no problems with bolt-hole alignment

Versatile can be used under or above ground; usable with abrasive materials; can handle wide temperature range

Durable all materials corrosion resistant; ductile iron used for flange, for added toughness

Reliable based on proven design principles; extensively field tested; manufactured under strict quality controls

Economical prevents delays during assembly; plain-end pipe less costly than threaded or flanged; no tie-rods required

Design Superiority

exceeds capabilities of threaded and weld flanges and flanged coupling adapters.


Technical specifications of Series 40 Union Flange.


SERIES 400-S / 400-C UNION FLANGE SPECIFICATIONS & DESIGN DETAILS

Flange Ductile iron ASTM A536 Grade 65-45-12 AISI 4140 Steel, tensile 190,000 psi minimum, heat treated and zinc plated

Drilling In accordance with ANSI B16.1 - Class 125, ANSI B16.5 - Class 150

Testing Flanges meet all test requirements of ANSI B16.1 - Class 125, ANSI B16.5 - Class 150

Gaskets Standard gasket supplied: SBR (BUNA-S), suitable for water, wastewater and most moderate chemicals. Temperature range -65ºF to +212ºF

Alternative gaskets (colour coded):

EPDM-Ethylene Propylene (green) Temperature range -65ºF to +350ºF

CR-Neoprene (yellow) Temperature range -65ºF to +212ºF

NBR-Buna-N, Nytril, Hycar (orange) Temperature range -50ºF to 450ºF

http://www.clowcanada.com/english/flange_series40_tech.html

Hydrostatic Pressure Test Flange Capable of withstanding the following hydrostatic test without leakage: 2" to 12" -- 750 psi

Applications

Flanges are designed to handle the following water working pressures (temperature range -20ºF to +150ºF): 2" to 12" -- 250 psi

Nom. Pipe Size Cast Iron Pipe O.D. 400-C A B B/C Bolt Hole Dia. Set Screws Weight Approx. (LBS.)

Size No. 2 2.50 6 2 4-3/4 3/4 1/2 x 1 4 5

2-1/2 † N/A 7 2-1/16 5-1/2 3/4 1/2 x 1 4 7 3 3.96 7-1/2 2-1/16 6 3/4 1/2 x 1 4 8

3-1/2 † N/A 8-1/2 2-1/16 7 3/4 1/2 x 1 8 9 4 4.80 9 2-1/16 7-1/2 3/4 1/2 x 1 8 11 5 † N/A 10 2-1/8 8-1/2 7/8 5/8 x 1-1/4 8 13 6 6.90 11 2-1/8 9-1/2 7/8 5/8 x 1-1/4 8 14 8 9.05 13-1/2 2-1/8 11-3/4 7/8 5/8 x 1-1/4 8 21

10 11.10 16 2-3/16 14-1/4 1 5/8 x 1-1/4 12 38 12 13.20 19 2-1/4 17 1 5/8 x 1-1/4 12 56

† Cast iron pipe not manufactured in these sizes

DEFLECTION THRUST RESTRAINT Nom. Pipe Size Maximum Angle Deflection Deflection Inches/18ft. Length WWP Rating (PSI) Thrust at Rated Pressure Thrust Restraint (LBS.) ‡

2 4-2' 15.23 250 785 22.800

2-1/2 3-56' 14.85 - - -

3 3-50' 14.47 250 1,767 22,800

3-1/2 3-47' 14.28 - - -

4 3-44' 14.09 250 3.142 45,600

5 3-41' 13.91 - - -

6 3-36' 13.59 250 7.069 50,600

8 3-20' 12.58 250 12,566 50,600

10 3-13' 12.14 250 19,635 75,900

12 2-35' 9.12 250 28,274 75,900

‡ These figures apply only for standard wall steel (schedule 40+) and ductile iron (class 52+) pipes, when the full recommended torque is applied to the set screw


LW 300C - Clow Canada

Documents

Transcript of LW 300C - Clow Canada