Luxury Brand · Web view Jewelry Sample Fact Sheet Form Luxury Brand Holdings has implemented...

Click here to load reader

  • date post

    16-Jul-2020
  • Category

    Documents

  • view

    2
  • download

    0

Embed Size (px)

Transcript of Luxury Brand · Web view Jewelry Sample Fact Sheet Form Luxury Brand Holdings has implemented...

Luxury Brand Holdings

On-line Jewelry Sample Fact Sheet Form

Luxury Brand Holdings has implemented an on-line sample fact sheet form to be used for the submission of jewelry samples to be considered for sale in our catalog, web and retail channels. Beginning immediately, only samples submitted with this form will be accepted for review by our buyers.

The on-line jewelry form is located on the Luxury Brand Holdings Vendor Extranet. If you already have an account on the Luxury Brand Holdings Vendor Extranet for access to our purchase orders, you now automatically have access to the new on-line jewelry fact sheet form and screens. A new main menu screen (see below) has been added after login that now allows you to navigate to the existing purchase order section, or to navigate to the new on-line fact sheet section.

**NOTE** – If you are a new vendor and do not have an active account on our Vendor Extranet, you should request through your buyer contact at Luxury Brand Holdings that your company be activated so that you may use the on-line form to submit samples. On an interim basis, and until you are activated on our Vendor Extranet, your merchant contact at Luxury Brand Holdings may authorize you to submit samples using the excel fact sheet form located at the end of this document. This is the only authorized instance where the on-line fact sheet form may not be used for sample submission.

Sample Submission Process Flow Overview

The overall process flow for sample submission to Luxury Brand Holdings remains the same, with the only exception that now you will be entering the fact sheet information into our on-line form instead of into an excel document:

1. CREATE the Fact Sheet. Use the Create New link (located at the top and bottom of the Fact Sheet Main screen) to begin entering information for a sample into the on-line fact sheet form. You can enter and modify information in the fact sheet, and save it for completion later, as many times as you wish PRIOR TO SUBMITTING/LOCKING THE FACT SHEET.

a. Fields with red asterisks are required fields. Uploading an image of the product is now also required. In addition, certain other fields are required only when certain classes of product are entered (for example, necklaces require a length but not earrings).

2. SUBMIT the Fact Sheet. When you are ready to send the sample to Luxury Brand Holdings and are sure that all of the information in the form is accurate and complete, click on the SUBMIT/LOCK button.

a. The system will check that all required fields are filled out

i. If all of the required fields are complete and accurate, you will be notified that the fact sheet has been submitted. Successfully submitting the fact sheet locks the information and creates a permanent record that cannot be changed by you or by Luxury Brand Holdings.

ii. If any of the required fields are not filled out, they will be shaded in red and you will be notified that the fact sheet has not been submitted. Complete the required information and click the submit button. A permanent record of your fact sheet is not created until you successfully SUBMIT/LOCK it.

3. Print the Fact Sheet. Use the Print button at the bottom of the fact sheet form to print a copy of the information you have entered to be included with the sample. (You can print a fact sheet as often as you wish, even before you have completed it, however when actually sending the sample you will want to include a copy that was printed after you have clicked Submit/Lock and successfully locked all of the information.

4. Send actual sample along with printed copy of the Fact Sheet to your buyer at Luxury Brand Holdings. You must continue to include a printed copy of this fact sheet when sending the sample. Samples received not accompanied by a submitted/locked fact sheet will returned at the vendor’s expense.

Note – when first getting started, you can use the link entitled “Example Factsheet” to view an example of a fact sheet that has been filled out correctly.

Field Specific Help for completing a fact sheet

LISTING Section

Invoice Number – If you know the number of the sample invoice this sample will be billed on enter it here. It is helpful to have this when matching up all of the samples we receive from you in a sample shipment.

Vendor Style - Provide the item or style number you use to identify this product in your systems. Your vendor style number will be included on our purchase orders along with our own item number

Vendor Description – This should be a description of the product that includes the most important information: Metal type/Metal color/Stone(s)/Type/Class. Example: “14k yellow diamond hoop earring”. Please avoid abbreviations where possible.

Country Of Origin – Select the proper country of origin from the drop down box. Instead of scrolling down and selecting, you can start typing the name of the country and it will fill in the rest.

Cost – After you will enter all the information in the Detail Section, you can press the Calculate Cost button, and the system will automatically calculate this field based on the information entered. This cost is in US Dollars.

The automatic calculation will not apply for the following metal types:

Stainless steel, Stainless Steel and Gold, Sterling Silver and Gold, Platinum, Palladium, Titanium, Gold Plate, Gold Plate Brass, Gold Tone, Gold Tone Brass, Silver Plate, Silver Plate Brass, Silver Tone, Silver Tone Brass

For all the above Metal Types you can enter your cost in US $ directly in the Cost field.

Manual Cost – You can enter the purchase cost based on your calculation. This field will not be effected by the automatic calculation of the Cost field. Enter this field in US Dollars, and use decimal for cents. For example; 537.50. This cost is only for your reference and the fact sheet will enter in our system based on the Cost field information. All costs must be in US Dollars.

INFO Section

Factsheet ID – This displays the system assigned unique Identification Number for the fact sheet and includes your vendor number.

Created By – This displays your vendor number.

Created On – This displays the date you created the fact sheet in our system and started entering information.

Last Modified On– This displays the last date that the fact sheet record was modified.

Buyer – Enter the name of the merchant at Luxury Brand Holdings who requested this sample.

PRODUCT Section

Class – Select the proper class of the item from the drop down list. For pendants, if you are selling it with a chain please select Necklaces. For Cuffs, please select Bracelet, bangles are slip-on or hinged.

Metal – Select the proper metal type from the drop down list. If you are unclear of the type to select, make your best decision and indicate any additional information in the Additional Notes field near the bottom of the form.

Gold Plate Microns (should be nickel free)– This field must be completed for metal types that consist of gold plating or coating “over” another metal type, as well as for vermeil.

Note -Gold over SS requires a minimum of 1 commercial micron of gold. To be represented as Vermeil, FTC guidelines require a minimum of 2.5 microns of gold. Gold plating over base metal/brass/bronze does not have a micron requirement but should have anti tarnish and/or an e-coating.

Metal Color – Enter the visual color of the metal type selected above (yellow, white, rose, two tone, etc…).

Finish – Select the proper finish from the drop down list. If you feel the proper finish for this sample is not in the drop down list, select “other” and provide clarification in the “Additional Notes” field near the bottom of the form.

Other Components – If the sample consists of components other than metal and gem stones, please select provide that information here by

Chain Type – If applicable (required for necklaces), select the proper chain type from the drop down list. If you feel the proper chain type is not in the drop down list, select “other” and a new row will open directly beneath to allow you to enter the proper chain type.

Clasp – If applicable (required for necklaces and bracelets), select the proper clasp type from the drop down list. If you feel the proper clasp type is not in the drop down list, select “other” and provide clarification in the “Additional Notes” field near the bottom of the form.

Bale – If applicable (required for Pendants) select the proper bale type from the drop down list. If you feel the proper bale type is not in the drop down list, select “other” and provide clarification in the “Additional Notes” field near the bottom of the form.

Safety - If applicable (required for Pins) select the proper safety type from the drop down list. If you feel the proper safety type is not in the drop down list, select “other” and provide clarification in the “Additional Notes” field near the bottom of the form.

Earring Backing Type - If applicable (required for earrings) select the proper backing type from the drop down list. If you feel the proper backing type is not in the drop down list, select what you feel is the closest to correct option from the list and provide clarification in the “Additional Notes” field near the bottom of the form.

Length (inches) – If applicable (required for necklaces, omegas, and bracelets) provide the actual length in inches of the sample being submitted.

Width (Inches) - If applicable, provide the width of the sample being submitted.

Ring Size – For Rin