Lutron | Drapery Track Systemhorizonyc.com/pdfs/products/catalog/Sivoia-QED-Drapery-Chassis... ·...
Transcript of Lutron | Drapery Track Systemhorizonyc.com/pdfs/products/catalog/Sivoia-QED-Drapery-Chassis... ·...
Specif icat ion Submittal page 1
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 1 06.11.10
Lutron | Drapery Track System
The Lutron drapery track utilizes the ultra-quiet, precision controlled Electronic Drive Unit. It controls the movement of the drape, adjusting it to the user’s desired positions.
Features• Smooth, ultra-quiet operation• Draperies start, move, and stop with precision• Offers programmable presets• Single, dual, curved, single-tandem and
dual-tandem tracks available• Easy-to-read and easy-to-use controls• Optional infrared system with QED, QS and
Stanza™ systems provide easy, convenient control from anywhere in the room
• Wireless control available with QS Wireless system• Available in right, left, and center draw
configurations• Does not require group controllers or relay
systems to create drapery groups and sub-groups• Can be installed in new construction or
retrofit application• Power failure memory for the lifetime of
the product • Operates up to 175 lb (79.4 kg) draperies• Manual open feature option available• Track splicing option available with up to
two splices per track• Available in pinch pleat and ripplefold pleat styles• 8 year limited warranty
Lutron Drapery Drive Unit
Lutron Drapery Track System
Specif icat ion Submittal page 2
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 2 06.11.10
Drive Belt
Idler Gear Housing
Cover
Track
Optional manual open master carrier available
Lutron Drapery Drive
Auxiliary CarriersStandardMaster Carrier
Optional Splicing BarSystem components
Standard one way draw master carrier
Drive end snap bracket
Idler end snap bracket Drive end snap bracket
One Way Draw Ripplefold Components
Center Draw Ripplefold ComponentsStandard center draw master carriers
Optional manual open center draw master carriers available
Optional manual open one way draw master carrier available
Specif icat ion Submittal page 3
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 3 06.11.10
Straight drapery track options
Center-draw, left or right drive
Left draw, left drive
Right draw, right drive
Tandem draw, left and right drives (operates as a center draw drapery)
NOTEValance and drapery not included
Specif icat ion Submittal page 4
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 4 06.11.10
Standard Curved Drapery track options
Right draw, right drive, inside curve
Left draw, left drive, inside curve
Left draw, left drive, outside curve
Right draw, right drive, outside curve
Min Drive Leg Length (D) – 22 in (581 mm)Min Idler Leg Length (B) – 23 in (587mm)One leg can be up to 72 in (1829 mm) while the other leg can be up to 144 in (3658 mm) (Drive can be located on either leg) for a total track length of 216 in (5487 mm)
B
D
D
B
D
B
B
D
87
81
Specif icat ion Submittal page 5
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 5 06.11.10
Standard Curved Drapery track options (continued)
Center draw, right drive, inside curve
Center draw, left drive, outside curve
Center draw, right drive, outside curve
Center draw, left drive, inside curve
B
D
D
B
D
B
B
D
Specif icat ion Submittal page 6
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 6 06.11.10
Center draw, tandem (right and left drive), inside curve
Center draw, tandem (right and left drive), outside curve
Standard Curved Drapery track options (continued)
B
D D
B
DD
Note: Dimension B and D do not include any wall offsets. When providing dimensions B and D, account for the wall offset to ensure the drapery track will fit properly in the desired location. The factory DOES NOT take any deductions from the provided dimensions. Refer to page 8 for recommended minimum offsets.
Specif icat ion Submittal page 7
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 7 06.11.10
System dimensions
Top view (single track, right draw)
2.1 in (52.1 mm)1.3 in (31.8 mm)1.6 in (41.3 mm)
Track width 18 ft (5.5 m) max without splice Up to 30 ft (9.1 m) with splice (2 splice max)
3.3 in (83.82 mm)
10.6 in (270 mm)
Front view (single track, right draw)
8.89 in (225.6 mm)
3.3 in (83.8 mm)
2.1 in (52.3 mm)
Electronic Drive Unit1.9 lbs (0.9 kg)
Specif icat ion Submittal page 8
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 8 06.11.10
Corner applicationLutron drapery tracks can be used in corner applications.
Dual drapery track systemLutron® drapery tracks can be used for a combination sheer/blackout treatment.
Single, tandem drapery track systemThe accuracy of movement and speed control of the Lutron drapery track system allows two independent systems to be used to create a center draw drape.
(wall mount shown)
(wall mount shown)
(wall mount shown)
Dimensions*
11.25 in (286 mm)
3.5 in (89 mm)
2.5 in (64 mm)
1 in (25 mm)
Dimensions*
11.25 in (286 mm)
3.5 in (89 mm)
2.5 in (64 mm)
1 in (25 mm)
5.5 in (140 mm)
Dimensions*
11.25 in (286 mm)
3.5 in (76 mm)
2.5 in (64 mm)
1 in (25 mm)
Dimensions*
11.25 in (286 mm)
3.5 in (76 mm)
2.5 in (64 mm)
Single drapery track systemMaintain enough clearance between the drapery track and the inside face of the top treatment or ceiling recess to allow the fabric to move freely.
Specif icat ion Submittal page 9
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 9 06.11.10
Ceiling bracket cam lock
Bracket optionsLutron drapery track is available in either wall mount or ceiling mount.
1.3 in(31.8 mm)
1.2 in(31 mm)
Ceiling mount bracket exploded
top view of clip arm extended in unlocked position
1.3 in(33 mm)
track
unlockedclosing direction
Ceiling mount application
Pocket mount application
Wall-mount bracket Wall mount application
Pocket mount application
1.3 in(31.8 mm)
1.2 in(31 mm)
Specif icat ion Submittal page 10
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 10 06.11.10
Wall mount bracket
Minimum extension
6.6 in (170.2 mm)
1.7 in(43 mm)1.2 in
(31 mm)2.7 in(70 mm)
6 in (152.4 mm)
4.1 in (108 mm)
1.7 in(43 mm)1.2 in
(31 mm)2.7 in(70 mm)
3.5 in(89 mm)
Maximum extension
Specif icat ion Submittal page 11
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 11 06.11.10
Dual wall mount bracket
Minimum extension9.6 in (248 mm)
Maximum extension
1.7 in(43 mm)
1.7 in(43 mm)1.2 in
(31 mm)
3.5 in (89 mm)4.6 in(117.5 mm)
9 in (229 mm)
12.1 in (311.2 mm)
6 in (152.4 mm)
11.5 in (292.1 mm)
4.6 in(117.5 mm)
1.2 in(31 mm)
Specif icat ion Submittal page 12
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 12 06.11.10
1½ inch Wood Screw
Structural Member
Recessed Pocket
Recessed Mounting Bracket
Drapery Track
1 inch (33 mm)
Minimum Pocket Width
* 1 inch (27 mm)Pocket Depth
Recessed mount bracket
3 inch Drywall Anchor Screw
Drywall Anchor
Recessed Pocket
Recessed Mounting Bracket
Drapery Track
1 inch (33 mm)
Minimum Pocket Width
* 1 inch (27 mm)Pocket Depth
½ inch (13 mm) hole
Mounting with drywall anchor
The track is predrilled with mounting holes for use with either mounting type. The holes are spaced as indicated below.
Mounting with wood screw
Drywall
* 1 inch depth provides complete concealment of the track while maintaining proper clearance for the drapery.
165
165
161
161
161
Specif icat ion Submittal page 13
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 13 06.11.10
Splice (optional)Track available with up to 2 splices
Splicing Bar
Track splicing is available as an option with all straight Lutron drapery track systems
Track with 1 spliceMinimum Length: 6 ft (1829 mm)Maximum Length: 30 ft (9144 mm)Track provided in 2 equal sections
Track with 2 splicesMinimum Length: 12 ft (3658 mm)Maximum Length: 30 ft (9144 mm)Track provided in 3 equal sections
Note:To maximize durability while minimizing carrier noise: Left and Right Drawsystems with one and two splices, and Center Draw systems with twosplices, utilize carriers with plastic wheels. All other configurations utilizecarriers with rubber wheels.
Specif icat ion Submittal page 14
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 14 06.11.10
Return size minimum4.68 in (119 mm) minimum for wall mount bracket
9.68 in (246 mm) minimum for dual mount bracket
Drapery fabric return
Drapery fabric
Pinch pleat | Drapery hook settingDrapes are typically sized so the bottom of the drapery track is located 4 in (101 mm) above the window casing. Location may need to be adjusted to accommodate the specific drapery size and application. Lutron recommends a drapery hook setting of 1/2 in (13 mm) from the top of the drape to the top of the hook (hooks not included). This locates the drapes just below the track and prevents it from rubbing on the track. It is recommended that a distance of 1/2-1 in (13-25 mm) be maintained between the bottom of drapery panel and the floor.
1/2 in (13 mm)
Top of drapery panel
Floor
4 in (100 mm)
Top of window
Bottom of drapery track
5/8 in(16 mm)
1/2-1 in (13-25 mm)
Bottom of drapery panel
Drapery panel height +5/8- 1 1/8 in (16-29 mm)
Specif icat ion Submittal page 15
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 15 06.11.10
NOTES • Drapery track
system compatible with Graber ripplefold snap tape
• Tracks available in 3 fullness factors: 80%, 100%, 120%
Idler end snap bracket Center DrawMaster Carrier
Auxiliary Snap locations
Drive end snap bracket
Center draw
Auxiliary Snap locations
Drive end snap bracket
One-way draw
One way draw master carrier
Top of snap tape and drapery panel
Floor
4 in (101 mm)
Drapery panel height +3/4-1 1/4 in (19-32 mm)
Top of window
1/2-1 in(13-25 mm) Minimum
Bottom of drapery panel
Ripplefold | Drapery tape assemblyThe bottom of the drapery track is to be mounted such that it is located a distance of 1/2 in (13 mm) + drapery panel height from the floor. Drapes are typically sized so the bottom of the drapery track and top of the drapery panel are located 4 in (101 mm) above the window casing. Location may need to be adjusted to accommodate the specific drapery panel height and application. It is recommended that a space of 1/2-1 in (13-25 mm) be maintained between the bottom of drapery panel and the floor.
Drive-end snap bracketIdler end snap bracket
Center draw master carriers (Center-draw tracks only)
Snap tape
Drapery panel
1/2 in(13 mm)
3/4 in(19 mm)
Specif icat ion Submittal page 16
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 16 06.11.10
Snap Tape
Drapery Panel
Snap Tape
Drapery Panel
Snap Tape
Drapery Panel
Ripplefold | Drapery tape assembly (continued)The Ripplefold drapery snap tape is attached to the top of the drapery panel by the drapery manufacturer. The number of snaps required is based on the Track Width, Draw Type and Fullness of the drapery. Refer to the Shade Configuration Tool (SCT) for the number of snaps required per panel for the given specifications. Left draw and Right draw configurations require one drapery panel. Center draw and Tandem draw configurations require two drapery panels. The Lutron Ripplefold drapery system is compatible with Graber snap tape, which has a spacing of 4 1/4 in (108 mm) between snaps. The Buttmaster Carriers and the End Snap Brackets, require the outermost snap on both ends of the snap tape to be spaced 1 in (25 mm) from the adjacent snaps.
Left Draw and Right Draw ConfigurationsNumber of Panels — 1Snap Tape Type — GraberInner Snap Spacing — 4 1/4 in (108 mm) typicalEnd Snap Spacing — 1 in (25 mm) Snaps Per Panel — Varies based on Track Width, Draw Type and Fullness. Refer to Shade Configuration Tool (SCT) for exact snap quantity.
Center Draw and Tandem Draw ConfigurationsNumber of Panels — 2Snap Tape Type — GraberInner Snap Spacing — 4 1/4 in (108 mm) typicalEnd Snap Spacing — 1 in (25 mm) Snaps Per Panel — Varies based on Track Width, Draw Type and Fullness. Refer to Shade Configuration Tool (SCT) for exact snap quantity.
Varies based on return distance
1 in (25 mm)
4 1/4 in(108 mm)
4 1/4 in(108 mm)
4 1/4 in(108 mm)
4 1/4 in(108 mm)
1 in (25 mm)
Varies based on return distance
Varies based on return distance
1 in (25 mm)
4 1/4 in(108 mm)
4 1/4 in(108 mm)
4 1/4 in(108 mm)
4 1/4 in(108 mm)
1 in (25 mm)
Varies based on return distance
1 in (25 mm)
4 1/4 in(108 mm)
4 1/4 in(108 mm)
4 1/4 in(108 mm)
4 1/4 in(108 mm)
1 in (25 mm)
Varies based on return distance
1 in (25 mm)typ
1 in (25 mm)typ
Specif icat ion Submittal page 17
Job Name:
Job Number:
Model Numbers:
Lutron® Drapery Track System Chassis Specification
086-123 17 06.11.10
Ripplefold | Manual open stackback characteristicsNote: Ripplefold drapery tracks with manual open feature will have two fixed ripplefold pleats at the master carrier that do not compress when the drapery opens. This will result in approximately 3 in (76 mm) more stackback per fabric panel than a standard ripplefold drapery panel.
2 fixed ripplefold pleats
3 in (76 mm) additional stackback with manual open master carrier
Standard ripplefolddrapery stackback