Lumerical 2015b Release: New Graphene Modeling Workflow

8
Lumerical 2015b Release New Graphene Modeling Workflow MAY 2015 PROPRIETARY AND CONFIDENTIAL © LUMERICAL SOLUTIONS INC 1

Transcript of Lumerical 2015b Release: New Graphene Modeling Workflow

Lumerical 2015b Release New Graphene Modeling Workflow

MAY 2015

PROPRIETARY AND CONFIDENTIAL© LUMERICAL SOLUTIONS INC

1

© LUMERICAL SOLUTIONS INC2

New Graphene Material ModelGraphene is now modeled using a surface conductivity

Treating graphene as a 2-D material leads to faster simulations

Two new components were added to the GUI in FDTD and MODE:

• New surface conductivity model was added to the material database

• Surface object was added to the list of geometric primitives

𝜎 𝜔, Γ, 𝜇𝑐 , 𝑇

© LUMERICAL SOLUTIONS INC3

New Surface Conductivity Model2015B ReleaseFDTD & MODE

new model

model parameters

© LUMERICAL SOLUTIONS INC4

New Surface PrimitiveFDTD 2015b Release

• The new 2D rectangle was specifically created for modeling graphene

© LUMERICAL SOLUTIONS INC5

Tunable THz Metamaterial

Transmitted Power Without Substrate Transmitted Power With Substrate

• The shown results were obtained using the FDTD solver

© LUMERICAL SOLUTIONS INC6

Electro-Optical Modulator

600 nm

graphene sheet

SiO2 (n = 1.44)

Si (n = 3.47)

Al2O3 (n = 1.746)

250 nm

7 nm

Based on the following waveguide configuration:

λ = 1.55 μm

Desired Mode

• The shown waveguide mode was obtained using the FDE solver.

© LUMERICAL SOLUTIONS INC7

Summary

Improved graphene workflow available in FDTD and MODE (2015b)

Graphene is now treated as a 2-D material

• A new surface conductivity model is being introduced. • A new geometric primitive specifically for graphene.

Treating graphene as a 2-D material leads to faster simulations