LTM 1130-5.1Mobile craneMax. lifting capacity: 130 tMax. lifting height: 91 mMax. working radius: 72 m

LTM 1130-5.12

Mobile Crane LTM 1130-5.1Flexible and economical to operate

LTM 1130-5.1 3

The Liebherr LTM 1130-5.1 mobile crane is characterised by its long telescopic boom, strong lifting capacities, exceptional mobility and comprehensive comfort and safety equipment. This 130-tonner features top-of-the-range technology, making it even more effective in operation.

60-mtelescopicboomand14mtelescopicboomextension(2x7m)

19-mfoldingflyjib,hydraulicallyadjustable(option)

60-toverallweight,incl.9-tballastat12-taxleload

Vehiclewidth:2.75mwith445/95R25(16.00R25)tyres

Greatflexibilityofuseduetooptimumliftingcapacitieswithfullandpartialballast

Active,speed-dependentrear-axlesteering

Pneumaticdiscbrakes

LTM 1130-5.14

Drivetrain

Six-cylinderLiebherrturbo-dieselengine, 370 kW/503 hp, max. torque: 2355 Nm

AutomatedZFAS-TRONICgearbox, 12 forward and 2 reverse speeds

ZFintarderdirectlyatthegearbox

2-stagetransfercase,0.78km/hcrawling speed

Axlestwo,fourandfivedriven,axleone as option

LTM 1130-5.1 5

4200

4000

12345

S2555.01

15

2750

4950

4980

R = 10390

R = 11340

8048

R = 4200

14805

7500

14500

8070

23

R = 4880

I

445/95 R 25 (16.00 R 25)

State-of-the-art chassis and drive technology

Hydro-pneumaticsuspension Niveaumatik

Maintenance-freesuspensioncylin-ders

Largedimensionstocopewithhighaxle loads

Suspensiontravel:+150/-100mm

Highlateralstabilitywhencornering

Choiceofdrivingstateusingfixedprogrammes

Pneumaticdiscbrakes

Highbrakingpower,improvedcontrol

Improveddirectionalstability

Noreductioninbrakingforceathighbrakingtemperatures (fading)

Longerlife

Shorterlabourtimesforchangingthe screening surfaces

Brakepadswithwearindicators

High mobility and cost effectivenessApowerfulsix-cylinderLiebherr turbo-dieselenginewith370kW/503hpen-sures swift driving performance. The automatic 12-speed power shift system ZF-AS-TRONICwith intarder provides a high level of cost effectiveness andexcellent comfort.

Reducedfuelconsumptionthroughlargenumberofgearsandtheefficiencyof the dry coupling

Excellentmanoeuvrabilityandminimumcrawlingspeedthankstotwo-stagetransfer case

Wear-freebrakingwithZFintarder

Telmaeddycurrentbrakeoptional,wearfreeandcomfortable

Compact, agile and weight-optimised

Thanks to its extremely compact design, the LTM 1130-5.1 can operate on the smallestofconstructionsites.Atanaxleloadof12t,itcandrivewithupto9tof ballast, making it flexible and economical to use.

Chassislengthonly12.35m

Smallestturning-circleradiusonly10.39m

Vehiclewidthonly2.75m,evenwith445/95R25(16.00R25)tyres

Ballastradiusonly4.20m

LTM 1130-5.16

Fivesteeringprogrammes

Programmeselectionatthetouchof a button

Cleararrangementofcontrolele-ments and displays

Programmescanbeswitchedwhiledriving

Crabsteeringcontrolledincomfortvia the steering wheel; no lifting of the centre axle

LTM 1130-5.1 7

Variable steering concept

Active rear-axle steering

The rear axles are actively electro-hydraulically controlled in accordance with the speed and steering angle of the front axles. Five different steering pro-grammes(P)canbeselectedatthetouchofabutton.

Much-reducedtyrewear

Improvedmanoeuvrability

Stabledrivingbehaviourevenathighspeeds

Allfiveaxlescanbesteered

High safety standards entire know-how from LiebherrCentringcylinderforautomaticstraighteningofrearaxlesincaseoffault

Twoindependenthydrauliccircuitswithwheel-andenginedrivenhydraulicpump

Twoindependentcontrolcomputers

P1Roadsteering

Axles1and2aresteeredmechanicallyusingthesteeringwheel.Axles3,4and5are actively steered, depending on speed andthefrontaxlelockangle.Atspeedsof30 km/h and over, axles 3 and 4 are set to straight-aheadpositionandlocked;at60km/h and over, axle 5 is locked in the same forward position.

P2All-wheelsteering

The axles 3, 4 and 5 are turned depend-ing of the axle lock of the front axles by the steering wheel so far that smallest turning radii are achieved.

P3Crabsteering

Axles3,4and5areturnedinthesamedirection as the wheel lock on axles 1 and 2 using the steering wheel.

P4Reducedswingout

The axles 3, 4 and 5 are turned depending on the axle lock of the front axles, so that the swing out of the chassis rear gets mini-mized.

P5Independentrear-axlesteering

The axles 1 and 2 are turned by using the steering wheel; the axles 3, 4 and 5 are steered by push button independently from the axle lock of the axles 1 and 2.

Centringcylindertostraightenrear axles

Automaticstraighteningofrearaxles in case of fault

LTM 1130-5.18

Thedriverscab

Corrosion-resistant

Safetyglassonallsides

Tintedglass

Electricwindows

Heatedandelectronicallyadjustableoutside mirrors

Air-sprungdriversseatwithlumbarsupport

LTM 1130-5.1 9

700

Thecranecab

Largefieldofvision

Safetyglazing

Tintedwindowpanes

Cranedriversseatwithlumbarsupport,multiplyadjustable

Heatandnoiseinsulatedinteriorcladding

Corrosionresistant

Workingfloodlight

Canbetilted20backwards

Supporting crane on outriggers quick,comfortableandsafe

BTTbluetoothterminal,mobilecon-trol and display unit

Electronicinclinationdisplay

Fullyautomaticlevellingbypushbutton

Enginestart/stopandspeedcontrol

Supportarealightingwithfourinte-grated lights

Supportcylinderstroke:front650mm,rear700mm

Outriggerbeams2-stage,fully hydraulic, low-mainte-nance extension system

Modern drivers cab and crane cab

Both themoderndriverscaband thecranecab that tiltsbackwardsofferacomfortable and functional working environment. The control elements and displays are ergonomically arranged, thereby ensuring safe and fatigue-proof operation.

Speedy and safe set-up

The outrigging, ballast assembly and attachment of additional equipment have allbeendesignedwithspeed,safetyandcomfort inmind.Specificascents,handholds and rails are provided to ensure the safety of operating staff.

Comfort and functionality

LTM 1130-5.110

The fully automatic telescoping system TELEMATIK

Greaterliftingcapacitieswithlongerboomsand larger radii thanks to light telescoping system

One-stagehydrauliccylinderwithhydrauli-cally operated drive pin

Maintenance-freetelescopingsystem

Fullyautomatictelescoping

Easiestcontrolandmonitoringoftelescop-ingactiononLICCONscreen

2.9mlongassemblyjib

LTM 1130-5.1 11

Roostersheave,foldablesidewise

Hydraulicassistanceforassemblyoftheswing-awayjibwithBTT

High lifting capacities and flexible boom system

Powerful, long telescopic boom and functional lattice extensions

The telescopic boom consists of the base section and 5 telescopic sections, which can be comfortably and automatically extended and pinned to the re-quested length by the thousand fold proven single cylinder telescoping system TELEMATIK.

60mlongtelescopicboom

10.8m19mlongdoubleswing-awayjib,attachableat0,20and40

Hydraulicadjustmentoftheswing-awayjibatfullloadfrom0to40(op-tional), interpolation of capacities

Hydraulicassistanceforassemblyoftheswing-awayjibwithBTT

2intermediatesections7meachforextensionofthetelescopicboomforoperationwithswing-awayjib

High capacities with full counterweight as well as with partial counterweight offer a wide application of operations

Highlateralstabilityduetotheovalboomprofile

Optimizedcapacitiesduetothenumerousextensionvariations

Capacity10.5tat60mlongtelescopicboom

High capacities at unpinned telescopic lengths

Hightelescopablecapacitiesduetointerpolation

Separatechartsforholdingoftheloadatunpinnedtelescopiclengths

DisplayatLICCONmonitor

Holding capacity

Unpinned telescopic length

Telescopablecapacity

100m

0

4

8

12

16

20

24

28

32

36

40

44

48

52

56

60

64

68

72

80

76

84

88

92

9640

12LTM 1130-5.1

Hydraulicallyadjustablefoldingjib(0to40)

Hose reel for the hydraulic cylinder

Hydraulic folding jib

12 t 12 t 12 t 12 t 12 t

13 LTM 1130-5.1

Ballast assembly in a matter of minutes

Multipleballastvariationsfrom2.9tto42t

Rapidballastingwithkeyholetechnologyfromwithinthecranecab

Compactballastdimensions:witha29.3-tballast, the ballast width is only 2.73 m

Ballastradius:only4.20m

60-ttotalweightincl.9-tballastat12-taxleload

StandardballastBasicballast 29.3t

Additionalballast 12.7t

Total 42.0t

Variable counterweight

2.9t

2.2 t

1.5 t

6.35t

2.4 t

3.7 t

6.7t

9.9t

6.35t

12 t 12 t 12 t 12 t 12 t

14 LTM 1130-5.1

The hoist gear

Liebherrhoistingwinchwithbuilt-inplanetary gearing and spring-loaded multi-disc brake

Linepull:88kNattheouterlayer

Max.ropespeed:110m/min

2.hoistgearoptional

LTM 1130-5.1 15

The slewing gear

Liebherrplanetarygearing,spring-loaded multi-disc brake

Canbeswitchedasstandard: released or hydraulically locked

Slewingspeedcanbesteplesslyadjustedfrom0to1.5rpm

Centralisedlubrication

Centralisedlubricationsystemasstandard for slewing ring, boom bearings,luffingramandwinchbearings

Uniformapplicationoflubricant

Lubricantlevelvisibleintranspar-ent container at all times

High-power crane drive

With tried-and-tested components

The drive components for crane operation are constructed for high performance and ensure sensitive and precise load handling. They are specially designed to suitthecranesusageandhavebeensubjectedtohardendurancetests.

Craneengine:four-cylinderLiebherrturbo-dieselengine,129kW/175hp,920Nmmax.torque,optimisedfuelconsumptionthankstoelectronicen-gine management

Diesel-hydrauliccranedrive,openoilcircuitswithelectricLOADSENSINGcontrol, four simultaneous working motions possible

Electric/electronicSPScranecontrolviaLICCONcomputersystem

Slewinggearcanbeswitchedasstandard:releasedorhydraulicallylocked.The movement can thus be optimally adapted to the different operating requirements, e.g. sensitive assembly work or rapid work cycles

Self-manufacturedLiebherrwinches,88kNlinepullattheouterlayer,great-er line pull means less rope reeving is needed

LICCON-monitor

Controlsensorwithtouchdisplays

Controlunit

Telescoping cylinderLuffing

cylinder

Controlblock

Hoistgear Slewinggear

Geartypepump

Variabledisplacementpump

Liebherr diesel engine

Sensor

LTM 1130-5.116

TheLICCONtestsystem

Rapidlocalisationofproblemswithoutany other measuring instruments

Errorcodeanddescriptiondisplayed

Convenientinteractivefunctionsformonitoring all inputs and outputs

Displaysfunctionsandallocationofsensors and actuators

LTM 1130-5.1 17

TheLICCONworkarealimitationsystem(optional)

Makesthecraneoperatorsjobeasierbyautomatically monitoring workspace restric-tions such as bridges, roofs, etc.

Simpleprogramming

Fourdifferentlimitationfunctions: -Pulley-headheightlimitation -Radiuslimitation -Slewinganglelimitation -Edgelimitation

TheLICCONworkplanner

Computerprogrammeforplanning,simulating and documenting crane op-erationsonaPC

Representationofallthecranesloadcharts

Automaticsearchforsuitablecranebased on load, radius and lifting height parameters

Simulationofcraneoperationswithoutline functions and supporting force display

Intelligent crane control

For functional and safe crane operation: the LICCON computer system

The soft and hardware of the mobile crane control is developed by Liebherr in-house.ThecentreistheLICCONcomputersystem(LiebherrComputedControl).

IntegratedLMLloadmomentlimiter

Keycomponentsarein-housemanufacturedbyLiebherr

Guaranteedsparepartsavailability

Worldwideprovenunderthemostdifferentclimateconditions

Operatorfriendly

ThesecondcontrolgenerationLICCON2istheresultofacontinuousdevelop-ment by the Liebherr specialists and enables the adaption to the constantly in-creasing demands of the markets due to its modern and future oriented control.

The data bus technology

Liebherrmobilecranesarecompletely interlacedbythedatabussystem.Allimportant electric and electronic components are equipped with own micro processorsandcommunicatewitheachotherbyonlylimiteddatacables.Forthe special demands of the mobile crane Liebherr has developed own data bus systems(LSB-Liebherr-System-Bus).Thedatabustechnologyimprovesthereliability, the comfort and the safety for road driving and crane operation:

Higherreliabilityduetoremarkablelesserelectriccablesandcontacts

Continuousselftestingoftheintelligentsensors

Comprehensivediagnosispossibilities,fastfaultfinding

Liebherr-WerkEhingenGmbHPostfach1361,89582Ehingen,Germany+497391502-0,Fax+497391502-3399www.liebherr.com,E-Mail:info.lwe@liebherr.com

PN205.00.E01.2012 Thepicturescontainalsoaccessoriesandspecialequipmentnotincludedinthestandardscopeofdelivery.Subjecttomodification

LICCON2 safe and comfortable

Colourmonitor

The readability of the data on themonitoroftheLICCON2control system in the crane cab is enhanced by the colour display. Warnings and crane utilization are consider-ably better recognized.

Wireless remote control (option)

All crane motions can be controlledoutside of the cab.

Higherefficiency

Freeviewandclosenesstotheload

Preventionofcommunicationerrorsbetweenthecranedriverandthejobsite personnel

Attaching and detaching of the hook block TheBTTBluetoothTerminaloffersthecranedriverthe possibility to attach or detach the hook block at the front of the vehicle within sight, as the hoist winch and theluffingcylinderofthetelescopicboomareremote controlled.

Touch displays

Belowthejoysticksintegrat-ed in the armrests the touch displays are installed, with which the various operational functions can be selected. These are beside others the supporting of the crane, the adjustmentoftheworkingfloodlights as well as heater and air condition controls.

Supporting the crane

ByuseoftheBTTthemobilecranewillbe setup comfortably and safely. En-gine start/stop and speed regulation, electronic inclination display and auto-maticlevellingarestandard.OptionallytheBTTcanalsodisplaytheoutriggerforces.

Wireless remote control