LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal...

4
LTI 011 Crushed Finger LTI 011 Crushed Finger 13/May/2001 13/May/2001 Crew were Crew were removing removing earth from earth from bund wall bund wall area using area using a large a large metal metal skip. skip. Position Position of skip of skip had to be had to be changed to changed to help help filling. filling.

Transcript of LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal...

Page 1: LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal skip. Position of skip had to be changed to help filling.

LTI 011 Crushed FingerLTI 011 Crushed Finger 13/May/2001 13/May/2001

Crew were Crew were removing removing earth from earth from bund wall bund wall area using a area using a large metal large metal skip. Position skip. Position of skip had to of skip had to be changed be changed to help filling.to help filling.

Page 2: LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal skip. Position of skip had to be changed to help filling.

LTI 011 Crushed FingerLTI 011 Crushed Finger 13/May/2001 13/May/2001

Labourer tried to Labourer tried to move bucket on move bucket on his own. When his own. When he lifted the skip he lifted the skip handle it crushed handle it crushed his hand that was his hand that was positioned on the positioned on the rim of the skip, rim of the skip, severely injuring severely injuring the little finger, the little finger, top portion had top portion had to be removed to be removed

Page 3: LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal skip. Position of skip had to be changed to help filling.

LTI 011 Crushed FingerLTI 011 Crushed Finger 13/May/2001 13/May/2001

What happenedWhat happened?

• Crane positioned skip next to earth.

• Filling the skip was difficult because it was in the wrong place.

• Local supervisor was not paying attention to the work.

• Labourer decided to move the skip on his own.

• He positioned his hands without thinking about possible hazards.

• Finger was trapped between lifting handle and rim of large steel bucket. Top section was crushed.

Page 4: LTI 011 Crushed Finger 13/May/2001 Crew were removing earth from bund wall area using a large metal skip. Position of skip had to be changed to help filling.

LTI 011 Crushed FingerLTI 011 Crushed Finger 13/May/2001 13/May/2001

How do we put it rightHow do we put it right??

Ensure all workers are properly trained for their work Ensure all workers are properly trained for their work and are familiar with routine procedures. and are familiar with routine procedures.

• • Ensure all work is adequately supervised.Ensure all work is adequately supervised.

• • Before work starts supervisor must always hold a Before work starts supervisor must always hold a Tool Box Talk with men doing the job. Tool Box Talk with men doing the job.

• Discuss all the possible hazards and how to control them.• Discuss all the possible hazards and how to control them.

• Stick to the Rules. STOP Work if Unsafe • Stick to the Rules. STOP Work if Unsafe

• When doing the job Pay Attention at ALL times.• When doing the job Pay Attention at ALL times.

• Remember: Competence Compliance Concentrarion • Remember: Competence Compliance Concentrarion