www.lsinjection.com

LS Hybrid Injection Molding Machine

WIZ-TA Series55~420 US Ton

INNOVATIVETECHNOLOGY PARTNER

MOLDING MACHINES DIVISION

Integrated ONE SolutionSmart Machine for Industry 4.0

Delivering value

Tech Center

Overseas Sales Office

The goal of LS injection molding machines is to meet and exceed the technology and quality requirements of all customers in the global market. We (in partnership with our customers) will expand entry into advanced markets with continuous technology and quality innovation that consistently creates value for our customers. This will lead to high and consistent earnings growth by anticipating and understanding market needs in advance and leveraging this knowledge and insight as an indicator to drive technology, leadership and innovation within the global market without ceasing. Beginning with the development of Korea’s first direct compression injection molding machines, LS has always put the customer first. From customer focused and dedicated injection molding machine technology such as two-platen injection molding machines for molders of light guide plates and mobile phones to multi-color injection molding and ultimately to full-electric injection molding machines which are the fruit of the most advanced technology.

About LSMtron

| LS Injection Molding Machine2 3LS Mtron WIZ-TA Series |

| LS Injection Molding Machine4 5LS Mtron WIZ-TA Series |

Model WIZ 55TA WIZ 90TA WIZ 140TA WIZ 190TA WIZ 240TA WIZ 330TA WIZ 420TA

Screw Type S A B S A B S A B Y A B Y S A B C S A B C S A B

Injection Unit

Screw Diameter mm Ø25 Ø28 Ø30 Ø30 Ø36 Ø40 Ø36 Ø40 Ø45 Ø40 Ø45 Ø50 Ø55 Ø50 Ø55 Ø60 Ø68 Ø60 Ø67 Ø70 Ø80 Ø65 Ø70 Ø75

Injection Weight (PS) oz 1.90 2.36 2.72 2.72 3.92 4.83 5.22 6.46 8.18 8.89 11.22 13.86 16.79 15.77 19.08 22.68 29.14 25.40 31.68 34.60 45.19 31.96 37.07 42.54

Injection Capacity in3 3.6 4.5 5.2 5.2 7.4 9.2 9.9 12.3 15.5 16.8 21.4 26.4 31.9 30.0 36.2 43.1 55.3 48.3 60.2 65.7 85.9 60.7 70.5 80.9

Injection Pressure PSI 36,400 27,000 25,200 38,400 26,700 21,600 35,700 28,900 22,800 35,200 27,800 22,500 18,600 32,200 26,500 22,300 17,400 30,200 24,200 22,200 17,000 30,500 28,000 24,400

Injection Rate oz/sec 1.73 2.16 2.50 2.13 3.08 3.79 2.91 3.58 4.56 3.58 4.53 5.58 6.73 6.32 7.64 9.10 11.70 10.14 12.65 13.83 18.06 10.41 12.11 13.86

Screw stroke in 4.72 4.72 6.30 8.66 9.84 11.02 11.81

Plasticization rate oz/hr 847 1,376 1,340 1,023 1,764 2,363 1,587 2,116 2,857 2,046 2,787 3,527 4,727 3,951 5,115 6,455 8,536 6,067 7,796 8,783 12,099 6,490 7,725 9,136

Screw Speed rpm 309 231 204 198 213 201 177

Screw L/D - 23 20 18.7 20 20 18 20 20.25 18 22.75 20 18 16 21.84 19.85 18.2 16.05 21.33 19.10 18.29 16 24 22.3 20.8

Injection Speed mm/sec 104 89 84 84 95 106 92

Clamping Unit

Clamping Force us tons 55 90 140 190 240 330 420

Opening Stroke in 9.84 11.81 13.78 17.32 20.47 23.23 27.55

Mold height (Min) in 3.94 5.91 6.69 7.48 9.06 11.81 11.81

Mold height (Max) in 13.39 18.11 19.69 22.05 21.65 26.77 29.53

Mold weight(Max) LBS 485 661 1,1058 1,764 2,425 4,189 5,512

Distance between Tie Bars(H x V)

in 12.40 x 12.40 13.58 x 13.58 16.14 x 16.14 20.47 x 20.47 22.04 x 19.29 26.96 x 22.83 27.95 x 27.95

Platen Size(H x V) in 17.71 x 17.71 19.68 x 19.68 24.01 x 24.01 29.13 x 29.13 32.67 x 29.92 39.17 x 35.03 40.15 x 40.15

Ejector Force us tons 3 3 4 4 8 12 12

General

Ejector Stroke in 2.76 3.94 4.72 5.51 5.12 5.91 7.87

Heating Wattage kW 5.1 6.7 7.3 7.9 12.1 15.2 23.5

Pump Motor Power kW 9.5 11.0 15.0 18.5 26.0 45.0 45.0

Total kW 15.8 18.9 23.5 27.6 39.3 61.4 69.7

Oil Tank Capacity gal 38.30 38.30 48.87 58.12 95.10 142.65 142.65

Machine Size(LxWxH) ft 13.25x4.10x4.99 14.04x4.00x3.77 15.68x4.46x5.35 16.83x4.76x5.83 22.15x5.15x6.43 25.69x5.77x6.79 25.23x6.53x6.50

NFB Capacity A 75 75 100 100 125 225 250

Machine Weight LBS 6,393 8,818 11,023 15,432 24,2450 33,510 30,865

Cooling water Capacity gal/min 2.51 2.91 3.96 4.89 6.87 11.89 11.89

MAJOR SPECIFICATION

Small-sized hydraulic injection molding machine

WIZ-TA SERIES

| LS Injection Molding Machine6 7LS Mtron WIZ-TA Series |

EXTERNAL FORM DRAWING

MOVING PLATEN DRAWING

Small-sized hydraulic injection molding machine

WIZ-TA SERIES

INCH A B C D E F G(G’) H(H')

WIZ 55TA 158.95 140.55 83.86 40.09 60.02 43.25 38.19 29.92

WIZ 90TA 172.32 153.94 84.17 50.12 59.54 44.21 49.25 29.92

WIZ 140TA 192.13 163.11 92.13 53.07 63.97 46.18 48.07 33.08

WIZ 190TA 205.87 172.56 92.32 56.97 70.16 50.08 53.39 37.00

WIZ 240TA 266.82 206.93 112.44 63.94 77.24 54.80 (57.09) (40.75)

WIZ 330TA 308.34 245.35 134.02 68.58 81.57 57.56 (61.61) (48.23)

WIZ 420TA 302.57 242.13 125.31 60.31 78.03 53.23 (69.09) (52.95)

INCH A B C D E F G H I J K L M N

WIZ 55TA 13.39 3.94 2.76 13.19 4.72 0.12 1.97 0.59 R1/2

1.26±0.0197

1.280.71

±0.00780.55

0.73±0.0039

WIZ 90TA 18.11 5.91 3.94 13.19 4.72 0.12 1.97 0.59 R1/2

WIZ 140TA 19.69 6.69 4.72 12.99 4.72 0.12 1.97 0.59 R1/2

WIZ 190TA 22.05 7.48 5.51 12.99 4.72 0.12 1.97 0.59 R1/2

WIZ 240TA 21.65 9.06 5.12 13.58 4.72 0.15 1.97 0.59 R1/21.58

±0.01971.50

0.87±0.0078

0.710.79

±0.0039WIZ 330TA 26.77 11.81 5.91 15.75 5.91 0.15 1.97 0.59 R1/2

WIZ 420TA 29.53 11.81 7.87 14.56 5.90 0.15 1.97 0.59 R1/2

WIZ 55TA

WIZ 140TA

WIZ 240TA

WIZ 420TA

WIZ 90TA WIZ 330TA

WIZ 190TA

A: Mold height (Max)

B: Mold height (Min)

C: Ejector Stroke

D: Nozzle Stroke

55~190ton

H H’

E

F

C

BA

D

A

EF

I

G H

L ±0.2

J ±0.5

M

K

N ±0.1

B

C D

G G’

240~420ton

| LS Injection Molding Machine8 9LS Mtron WIZ-TA Series |

Clamping Unit

Contents Tonnage Contents Tonnage

Mold opening/closing speed control 4 Stages 55~420 Automatic Mold Clamps 55~420

Hydraulic ejector device 2 Stages 55~420 T-slot platen 55~420

Oscillate ejector 55~420 Machine Top cover(ANSI) 55~190

Mold height adjustment by Hydraulic Motor 55~420 Manual Clamps 55~420

Alarm for Mold Protection 55~420 Nozzle forward,back speed up/down 55~420

Automatic clamping force setup 55~420 Product chute 55~420

Linear sensor for mold position 55~420 Double core A,C,D 55~420

Linear sensor for ejector position 55~420 Electrical unscrewing core device 55~420

Interlock for ejector backward completion

55~420Air blast (Fixed 1, Moving 1, one touch coupling(Ø10)

55~420

Safety guard electric, mechanical, hydraulic 55~420 Clamping unit upper cover(ANSI) 55~190

Injection Unit

Contents Tonnage Contents Tonnage

Injection speed control 5 Stage 55~420 Linear sensor for injection position 55~420

Injection pressure control 5 Stage 55~420 Injection unit swivel device Manual 55~330

Holding pressure control 3 Stage (Ramping)

55~420Injection unit swivel device (Hydraulic)

420

Charging control 3 stage 55~420Back pressure remote control Automatic

55~420

Back pressure control 3 stage 55~420 Power saving heater 55~420

Over charging time alarm 55~420 Purge cover interlock 55~420

Heater disconnection alarm 55~420 Open nozzle 55~420

Screw diameter selection (A,B,C) 55~420 Purge cover (Tunnel) 55~420

Screw position display 55~420 General hopper 55~420

Screw cold start prevention 55~420 Top cover for injection unit (CE) 55~420

Suck-back 55~420Nozzle tip(1/2"), Ø0.12", 50mm ASSEMBLY UNF 7/8"-14

55~190

Cushion display & alarm 55~420Nozzle tip(1/2"), Ø0.15", 50mm ASSEMBLY UNF 7/8"-14

240~420

Screw RPM display 55~420 Heater Buzzer(Low Temp) 55~420

Intrusion circuit 55~420 Anti-abrasion barrel(HB100) 55~420

PID Temp. control 55~420 Anti-abrasion Screw(SKD-11) 55~420

Automatic purge circuit 55~420 Temp indicator for hopper hole 55~420

Heater temperature indicator/alarm 55~420 Nozzle Touch Sensor 55~420

General

Contents Tonnage Contents Tonnage

Filter external exchange Valve gate connection terminal box 55~420

Water Manifold 55~190Ton, 10points, ball valve, Ø10

55~190 Level pads 55~420

Water Manifold 240~420Ton, 10points, ball valve, Ø10

240~420 Central grease supply device 55~420

Mold data memory 55~420 Oil Temperature alarm 55~420

Cycle indicator & alarm 55~420 Oil temperature setting device 55~420

Unmanned operation 55~420 Oil level alarm 55~420

Control type : Compact System 4Slot 55~420 Lubrication refueling alarm 55~420

Preset counter 55~420 Lubricant oil recycling device 55~420

Statistical process control 55~420Subsidiary equipment outlet 4P socket 32A/2EA

55~420

Data diagnostic screen 55~420Subsidiary equipment outlet 2P socket 15A/2EA (110V)

55~420

Operating help screen 55~420 Alarm buzzer 55~420

Data graphic monitor 55~420 Filter alarm 55~420

Error message display 55~420 Heater operating preset schedule 55~420

Oil preheating function 55~420 Robot connector (Euro map 12) 55~420

Main power Breaker switch 55~420 Off-line oil filter (RRR type) 55~420

Robot Interface Mounting Holes 55~420

SPEC LIST

Small-sized hydraulic injection molding machine

WIZ-TA SERIES

Integrated ONE SolutionSmart Machine for Industry 4.0

Delivering value

COPY

RIG

HT

(C) 2

01

9 A

ll ri

ghts

res

erve

d b

y LS

Mtr

on M

oldi

ng M

achi

ne D

ivis

ion.

20

19

08

29

00

00

COPY

RIG

HT

(C) 2

01

9 A

ll ri

ghts

res

erve

d b

y LS

Mtr

on M

oldi

ng M

achi

ne D

ivis

ion.

20

19

10

01

00

00

Overseas Sales Head Office7F, LS Mtron Hi-Tech Center, 39, LS-ro 116beon-gil, Dongan-gu,Anyang-si, Gyeonggi-do, 14118, KoreaTel : +82-31-8045-9758

USA Sales Head Office6670 Jones Mill Ct, Suite G Peachtree Corners, GA 30092Tel : +1 678-395-4389, 770-674-7446 Fax : 770-696-5361

Daiichi Jitsugyo (America), Inc.,at 939 A.E.C. Drive, Wood Dale, Illinois USA 60191Tel : +800-843-1672Email : sales@djausa.com

E-SOLUTION, INC.4081 E. La Palma Ave Ste. J, Anaheim, CA 92807Tel : +714-743-0906

www.lsinjection.com