LS-dyna and Prepost StepbyStep Training manual · 1 LS-dyna and Prepost 4.3.13+ StepbyStep Training...
30
1 LS-dyna and Prepost 4.3.13+ StepbyStep Training manual By Jeanne He [email protected] October , 2017 Forming Simulation Technology LLC
Transcript of LS-dyna and Prepost StepbyStep Training manual · 1 LS-dyna and Prepost 4.3.13+ StepbyStep Training...
1
LS-dyna and Prepost 4.3.13+
StepbyStep Training
manual
By Jeanne He
October , 2017
Forming Simulation Technology LLC
2
Open an IGES file:
3
1
2
Directory: Workshop 1
4
5
6
7
Input Designed Surfaces Iges file
3
Input Surfaces
4
Check off other
layers, leave only
Shell 1( the punch)
displayed
Turn Layers Off/On
5
1
2 3
4
5 6
7
Mesh the Punch
6
Left click on the
name and right
click, select
rename
Rename Mesh Layer to Punch
Enter to complete
7
Check off other layers, leave
only Shell 2( the Die) displayed
Turn Layers Off/On
8
4
1
2
5
3
Mesh the Die
9
Rename Mesh Layer to Die
Left click on the
name and right
click, select
rename
Enter to complete
10
Check off other layers,
leave only the surfaces of
the binder displayed
Turn Layers Off/On
11
4
1
5
3
2
Mesh the Die
12
Rename Mesh Layer to Binder
Left click on the
name and right
click, select
rename
Enter to complete
13
Open an IGES file:
3
1
2
Directory: Workshop 1
4
5
6
7
Input Blank Surfaces Iges file
14
Import Bank Surfaces into the Model
15
4
1
5
3
2
6
7
Mesh the Blank
16
1
2 3
Easy Setup
17
1
Select the Draw Type
18
2
5
1
4
6 ,type in
thickness and
friction 7 Select
Steel/DQSK/Mat37..
3 ,pick part
5
Define Blank/Blank Material/Blank Thickness
19
2
3, left mouse pick
Die from the name
list, click right
mouse button when
finish
5
1
4
7
8
6 ,pick part
9, pick part
name and right
click
Define Tools/Die/Binder/Punch
20
1. Select “Next”
twice to reach the
“control” tab
2
3. Select “Next”
to reach the
“submit” tab
Select the Control Options and Preview Tool Motions
4. Select “Forming Preview” to
check the tool position and
motions. This function requires
an additional exe files in your
installation directory
21
1
2
4. Select “output”
to write out the
input file for the
solver
5. Select “open
folder to run the
job and viewing
result files 3. Check this box
Output Files for the Calculation
22
1. Click the batch file test1.bat,
calculation will start.
Forming Results will be in this folder
Run batch file and Results Folder
23
Open the Result files
Or user can drag the *.d3plot file to on the desktop
24
Open the Result files
25
1. Check off tools,
leave only blank on
2. Delete free
nodes in the model
3. Select play for
animation
On/off Parts and Animations
26
2
3
4
5
1
Plot the Thickness
27
1
2
3 4
5
7 – pick
the part
8
6
Plot FLD
28
Output Part Lines
5.Pick the part
4
3
6
1
2
29
4
3
2
1
5
