Loxanol® OT 5853
Transcript of Loxanol® OT 5853
150 years 150 years
Loxanol® OT 5853
VOC-free open time prolonger for plasters with excellent cold storage stability
Formulation Additives Dispersions & Pigments Division European Coatings Show 2015
150 years
Content
2
Loxanol® OT 5853 - VOC-free open time prolonger for plasters with excellent cold storage stability
EIFS – Basic definitions
Open time prolongers – Performance benefits
Open time prolongers – Portfolio
Loxanol® OT 5853 – Proven performance
Back-up
Content
150 years
3 1 Wärmedämmverbundsystem
Exterior insulation finishing systems (EIFS / WDVS1)
150 years
Exterior insulation finishing systems (EIFS / WDVS1)
4
Wall
Adhesive
Plaster
Reinforcement
Styrofoam
Paint
1 Wärmedämmverbundsystem
Adhesive
150 years
Rapid drying Uneven surface structure Cracks
Construction application problems in summer
5
150 years
Construction application problems in summer Construction application problems in summer
The plaster is taken out of the bucket and spread on Styrofoam. Then it is equalized (structured) to form a homogeneous surface. On larger buildings, workers start applying the plaster on the highest level and work from (e.g.) left to right and top to bottom. There is always freshly applied plaster overlapping plaster that has been applied 30 min to 1 hour before. The overlapping zones do not look homogeneous if the plaster does not contain an open time prolonger.
6
150 years
Structured after several minutes of drying
Immediately structured
For plasters without OTP: Appearance of plaster structure changes significantly depending on drying times before structuring
7
Construction application problems in summer
Plaster without open time prolonger
150 years
Open time prolongers
Overcome the problems caused by drying too fast
Provide extension to open time
Reduce cracking
Help ease the application and improve structure development
Provide hydrophobizing as a side-effect
Recommended dosage: 0.2% - 1.0% on the final product
8
Open time prolongers Performance benefits
150 years
Open time prolongers Portfolio
New product name
Old product name
Description Solids (%) Viscosity (mPa.s)
VOC content*(%)
Loxanol® OT 5840 Loxanol® DPN Aqueous dispersion
of oleochemical compounds
20 600 < 0.1
Loxanol® OT 5843 Loxanol® 842 DP-3 30 ~ 5,000 < 0.1
Loxanol® OT 5846 Loxanol® 842 DP-6 20 ~ 2,000 < 0.1
Loxanol® OT 5900 Loxanol® P Oleochemical compound on silica
carrier
45 (14% actives)
powder < 0.1
Loxanol® OT 5853 (New)
Aqueous dispersion of oleochemical
compounds
30 ~ 1,000 < 0.1
9
* Recommended for low-VOC paints and plasters. Measurements according to the ISO 11890-2 analytical method defined in the European Paints Directive 2004/42/EC.
150 years
Loxanol® OT 5853 Proven performance: Highlights
Environmental aspects
VOC-free according to EU 2004/42 1 method
APEO free
Low odor
Designed for paints with eco-labels 2
Performance highlights
Improved cold storage stability
Improved handling reduced product viscosity (~ 1,000 mPa.s) at high concentration level (30% active)
Minimization of pore building
1 VOC content < 0,1% acc. EU 2004/42 ( b.p. > 250°C) (750 ppm) 2 Suitable for achieving the European Ecolabel for “indoor paints and varnishes” 2009/544/EC and for “outdoor paints and varnishes” 2009/543/EC for the final plaster
10
150 years Loxanol® OT 5853 Proven performance: Open time, pinholes and cracking
Relative rating of open time, pinholes formation and cracking vs. internal benchmark and alternative market product
11
0123456
Open TimePinholesCracks
Loxanol® OT 5853 shows excellent performance, slightly better than the alternative market product
5 = very good 1 = bad
150 years
Loxanol® OT 5853 Proven performance: Pinholes and cracking
Reduction of pinholes and crack formation
12
Without open time prolonger
Loxanol® OT 5843
Loxanol® OT 5853
Alternative market product
Loxanol® OT 5853 shows as excellent performance as Loxanol® OT 5843 and better than the alternative market product
150 years
Loxanol® OT 5853 Proven performance: Cold storage stability
Improved cold storage stability
13
0100020003000400050006000700080009000
star
t1.
cyc
le2.
cyc
le3.
cyc
le4.
cyc
le5.
cyc
le6.
cyc
le7.
cyc
le8.
cyc
le
OT 5840CompetitorOT 5853
Storage cycles: 1 cycle = 3 days 3°C -> RT 1 day -> 3 days 3°C
Paste
Viscosity (mPa.s)
150 years
BASF Solution Finder Tool for Formulation Additives
14
This tool provides you the best additive solution for your challenging formulation task :
• From dispersing agents, wetting agents and surface modifiers, to defoamers, rheology modifiers and film-forming agents
Explore the BASF formulation additives portfolio for the paints and coatings industry, by :
• Receiving recommendations for your formulation challenges
• Understanding the main benefits of our products by application and get technical information
• Ordering samples or contacting us for more detailed consultations
Check out our Solution Finder Tool on www.basf.com/formulation-additives
150 years
150 years