LOW VOLTAGE FLUORESCENT LIGHTING PRODUCTS

LOW VOLTAGE

FLUORESCENT LIGHTING PRODUCTS Rev. 6

Front Cover Rev 6 July 2014

Get everything You Need in Fluorescent Lighting from One Convenient Source!

Thin-Lite Corp. offers over 200 fixtures in 12VDC or 24VDC versions. As the only US based manufacturer of low volt fluorescent lighting we provide technical, engineering, and design assistance to satisfy your lighting requirements. Custom features are available. Send specifications to [email protected] for quotation.

Ordering — Five Fast Ways to Order

1) Phone 2) Fax 3) EDI

4) Mail 5) [email protected]

Shipping — FEDEX, UPS, LTL, TL, Container

Stock items ship within 72 hours. Allow two-week lead time for special order items.

Payment — Four Payment Methods

1) Check

2) VISA or MASTERCARD or DISCOVER

3) C.O.D.

4) Wire transfer

Warranty — 2 Year Renewable 1) Limited lifetime warranty for original purchaser.

2) Fixture is repaired or replaced at no charge.

Details on page 23.

Table of Contents

109-110 Circuline Surface Mount 1

Single Tube Surface Mount 2

Original Dual Tube Surface Mount 3

600 Series Elegant Surface Mount 4

620 Series Compact Surface Mount 5

700 Commercial Grade Recessed 6

700 Euro-Style Recessed 7

170 Series Low Profile 8

190 High Efficiency Series 9

180 Industrial & Commercial 10

160 Series Weatherproof Outdoor 11

900 Series Compact Surface Mount 12

Commercial Truck Series 13

Specialty & Emergency Vehicle 14 - 16

Electronic Inverter Ballasts 17

ST 100 Series Valance Lights 18

ST 130 Series Surface Mount 19

Incandescent Series 20

Halogen & Replacement Lamps 21

Installation & Warranty 22 - 24

Table of Contents Rev 4 July 2013

mailto:[email protected]


We have received praise from owners,

manufacturers and dealers both for the quality

of our products and our after-sales service.

Over the years the engineers at Thin-Lite

Corporation have striven for continual

Improvement. They have continued to test and

refine the latest technology to meet

tomorrow’s lighting needs.

Dave Szymanek, (May 1, 1943 - Dec. 31, 2010), President of Thin-Lite Corporation, at the time, proudly accepts the “E”

Award for Excellence in Exports from President Ronald Reagan in the Rose Garden of the White House in 1984.

Thin-Lite Corporation pioneered fluorescent

lights for the RV market in 1969. Sure, there

were other fluorescents on the market in

1969, but nobody could match the durability

and brightness of Thin-Lite Products.

Today we are the leaders in the development

and manufacture of 12 volt DC lighting for

industry, trucking and recreational vehicles.

Our all-aluminum housings are corrosion and

rust resistant.

We are proud to say that no other line of

fluorescents lighting match our record. We

were the first in the industry to secure U.L.

listing of 12 volt DC fluorescent for marine

and R.V. Look for the familiar U.L and CE

symbols on our packages.

When you have over ten million Thin-Lites in

use, you are sure to hear from your customers.

In 1981, Thin-Lite Corporation introduced low

Voltage Low Pressure Sodium lights for use in

conjunction with photovoltaic, where grid

power is unavailable. Typical applications

include warehouse, security and street lighting

in remote areas. In 1999 Thin-Lite Corporation

introduced the 650 and 760 series Elegant light

fixtures. In 2002, 620 series, 500 series and

VFI 15, 199PL models we added in our

production line.

Thin-Lites are recognized and in demand

worldwide. Whether in the Sahara, the middle

of the jungle, or atop remote peaks in the Alps,

Thin-Lites have been found dependable and

efficient. In appreciation of this outstanding

representation of American know-how,

President Ronald Reagan awarded the

Presidential “E” Award for Excellence in

Exports to Thin-Lite Corporation in 1984.

At Thin-Lite we will continue our efforts to

produce the finest quality and most efficient

lighting for a variety of lighting needs

worldwide.

This includes fixtures using standard

fluorescent tubes as well as the full color

spectrum fluorescent tubes now available

everywhere. We can design and build to

customer requirements. We look forward to

serving you.

Co. History Rev 3 Aug. 2012

PHONE: (805) 987-5021 FAX: (805) 388-0921 E-MAIL: [email protected] 1

THE ORIGINAL FLUORESCENT

CIRCULINE LIGHT FIXTURES

The Circuline series offer years of reliable, virtually maintenance free service while delivering maximum light output at minimal amp draw. Designs are complemented by opaque white or prismatic diffuser lenses, white powder coated aluminum housings, and attractive wood grain trim. Lamp and push button switch included with all fixtures. Model 109C, Model 109CXL and Model 110 have round housings. Model 109S is supplied with square housing. Model 110 is available with decorative opaque white lens to maximize light output for larger areas up to 100 square feet.

MODEL NO.

WATTS

LAMP

VOLTAGE

AMPS

LUMENS

LENS

DIMENSIONS

mm

WEIGHT

kg

109C

22

ONE FC8T9/CW

12 VDC

1.6

1000

OPAQUE WHITE

9.5” DIA X 1.75”

241.3 DIA X 44.5

0.85 lb.

0.386 kg

109CXL

22

ONE FC8T9/CW

12 VDC

1.6

1000

CLEAR

9.5” DIA X 1.75”

241.3 DIA X 44.5

1.17 lb.

0.531 kg

109CAXL

22

ONE FC8T9/CW

12 VDC

1.6

1000

AMBER

9.5” DIA X 1.75”

241.3 DIA X 44.5

1.17 lb.

0.531 kg

109S

22

ONE FC8T9/CW

12 VDC

1.6

1000

OPAQUE WHITE

9.5” SQU X 1.75”

241.3 SQU X 44.5

1.12 lb.

0.508 kg

110

32

ONE FC12T9/CW

12 VDC

2.2

1825

OPAQUE WHITE

13.25” DIA X 2.375”

336.6 DIA X 60.3

2.08 lb.

0.944 kg

All Thin-Lite Corporation products comply with and exceed most industry standards. However, due to continued

manufacturing improvements, UL listings for individual Thin-Lite and S.T Lighting fixtures will vary. Please consult

factory for current information. Other voltages, high humidity and RFI suppressant are available. Consult factory. Lumen

ratings according to lamp manufacturers’ 60Hz data for CW lamp. Specifications subject to change without notice.

THIN-LITE CORPORATION

530 CONSTITUTION AVE CAMARILLO, CA 93012

Original Circle Rev 4 July 2013

Visit us @ www.thinlite.com


http://www.thinlite.com/

THE ORIGINAL FLUORESCENT SINGLE

TUBE SURFACE MOUNT LIGHT FIXTURES

Thin-Lite surface mount fixtures designed for high light output at low amp draw. They offer years of reliable, virtually maintenance free service. Energy efficient, they are complemented by non-yellowing diffuser lens, white pre-painted finish, and attractive wood-grain trim. Standard fixtures have aluminum housing. They include standard fluorescent tubes powered by Thin-Lites’ highly efficient DC electronic ballasts. Model 115 supplied without wood grain trim lens.

MODEL NO.

WATTS

LAMP

VOLTAGE

AMPS

LUMENS

SWITCH

DIMENSIONS

mm

WEIGHT

kg

111

8

ONE F8T5/CW

12 VDC

0.8

400

ROCKER

12.25” X 4.125” X 1”

311.2 X 104.8 X 25.4

0.72 lb.

0.327 kg

115

15

ONE F15T8/CW

12 VDC

1.3

825

ROCKER

18” X 4” X 1.375”

457.2 X 101.6 X 34.9

1.04 lb.

0.472 kg

125

13

ONE F13T5/CW

12 VDC

1.1

850

ROCKER

21.312” X 4.125” X 1”

541.3 X 104.8 X 25.4

1.12 lb.

0.508 kg



factory for current information. Other voltages, high humidity and RFI suppressant are available. Consult factory. Lumen

ratings according to lamp manufacturers’ 60Hz data for CW lamp. Specifications subject to change without notice.



Original Single Rev 4 July. 2013


2 PHONE: (805) 987-5021 FAX: (805) 388-0921 E-MAIL: [email protected]




THE ORIGINAL FLUORESCENT DUAL

TUBE LIGHT SURFACE MOUNT FIXTURES

Thin-Lite surface mount fixtures are designed for high light output with low amp draw. They offer years of reliable, virtually maintenance free service. Non-yellowing diffuser lens with or without wood grained trim and white powder coated aluminum housings are standard. Fixtures use standard fluorescent tubes, available worldwide, and Thin-Lites’ highly efficient DC electronic ballasts. Model 180 has a three way rocker switch for choice of red light or white light. Model 190 has two separate rocker switches and two DC ballasts to operate red lamp, white lamp, or red and white simultaneously.

MODEL NO.

WATTS

LAMP(S)

VOLTAGE

AMPS

LUMENS

SWITCH

DIMENSIONS

mm

WEIGHT

kg

112

16

TWO F8T5/CW

12 VDC

1.4

800

ROCKER

12.25”X5.5”X1”

311.2X139.7X25.4

0.92 lb.

0.418 kg

116

30

TWO F15T8/CW

12 VDC

2.2

1650

ROCKER

18”X5.625”X1.375”

457.2X142.9X34.9

1.46 lb.

0.663 kg

126

26

TWO F13T5/CW

12 VDC

2.0

1700

ROCKER

21.312”X5.5”X1”

541.3X139.7X25.4

1.36 lb.

0.617 kg

180

8 / 16

TWO F8T5/CW

12 VDC

0.8 / 1.4

400 / 800

3 POSITION

12.25”X5.5”X1”

311.2X139.7X25.4

0.94 lb.

0.427 kg

190

15 / 30

TWO F15T8/CW

12 VDC

1.3 / 2.2

825 / 1650

2 SWITCHES

18”X5.625”X1.375”

457.2X142.9X34.9

1.80 lb.

0.817 kg


manufacturing improvements, UL listings for individual Thin-Lite and S.T Lighting fixtures will vary. Please

consult factory for current information. Other voltages, high humidity and RFI suppressant are available. Consult

factory. Lumen ratings according to lamp manufacturers’ 60Hz data for CW lamp. Specifications subject to

change without notice.



Original Dual Rev 4 July. 2013




Visit us @ www.thinlite.com CAMARILLO, CA 93012


600 SERIES ELEGANT SURFACE MOUNT

FLUORESCENT LIGHT FIXTURES

These surface mount light fixtures provide efficient lighting for elegant interiors. Designed especially for O.E.Ms, they are easy to install in ceilings and under cabinets. They provide the “custom made” look in either the anodized aluminum housing or molded frame. Clear acrylic diffuser lens add the finishing touch.

MODEL 616

30 watt 12VDC light. 2.2 amps. Overall dimensions: 20.625” x 5.53” x 1.57”

(523.9 mm x 140.5 mm x 39.9 mm).

Includes two F15T8CW fluorescent tubes.

1650 design lumens. White end cap.

Rocker switch. 2.26 lb. (1.025 kg).

Model 690 has two ballasts & two switches.

MODEL 612


(379.4 mm x 140.5 mm x 39.9 mm).


800 design lumens. White end cap.

Rocker switch. 1.54 lb. (0.699 kg).

MODEL 656


(575.4 mm x 185.4 mm x 39.6 mm).


1650 design lumens. White diamond polish. Rocker switch. 1.84 lb. (0.835 kg).

MODEL 652


(427.8 mm x 185.4 mm x 39.6 mm). Includes two F8T5CW fluorescent tubes. 800 design lumens. White diamond polish. Rocker switch. 1.22 lb. (0.554 kg).

#616

#612

#656

#652


manufacturing improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will vary. Please





530 CONSTITUTION AVE

600series Rev 4 July 2013



620 SERIES ELEGANT COMPACT SURACE

MOUNT FLUORESCENT LIGHT FIXTURES

Low profile 620 Series are 1.5” deep, light weight, with contoured design for mounting on curved or flat surfaces. Semi-clear diffuser lens and white powder coated aluminum housings provide maximum reflectivity. BX models are supplied with CFL (compact fluorescent lamps). **Actual lumens may vary. Please use for comparison only.

MODEL NO.

WATTS

LAMP(S)

VOLTAGE

AMPS

LUMENS**

SWITCH

DIMENSIONS

mm

WEIGHT

kg

622

16

TWO F8T5/CW

12 VDC

1.4

1200

ROCKER

14”X5.6”X1.5”

354 X 141 X 38

1.32 lb.

0.598 kg

622BX

18

ONE 18watt CFL

12 VDC

1.5

1500

ROCKER

14”X5.6”X1.5”

354 X 141 X 38

1.32 lb.

0.598 kg

626

30

TWO F15T8/CW

12 VDC

2.2

1925

ROCKER

19.7”X5.6”X1.5”

499 X 141 X 38

1.84 lb.

0.834 kg

626BX

36

ONE 36 watt CFL

12 VDC

2.3

3000

ROCKER

19.7”X5.6”X1.5”

499 X 141 X 38

1.84 lb.

0.834 kg

626WW

30

TWO F15T8/WW

12 VDC

2.2

1925

ROCKER

19.7”X5.6”X1.5”

499 X 141 X 38

1.84 lb.

0.834 kg













Visit us @ www.thinlite.com CAMARILLO, CA 93012

6 PHONE : (805) 987-5021 FAX: (805) 388-0921 E-MAIL: [email protected]

700 SERIES RECESSED COMMERCIAL

GRADE FLUORESCENT LIGHT FIXTURES

These Commercial Grade Recessed light fixtures provide efficient lighting for elegant interiors. Designed to O.E.M

specifications, they are easy to install in ceilings and under cabinets. They provide the “custom made” look in either the

anodized or powder coated aluminum housings. Injection molded or extruded acrylic diffuser lenses add the finishing

touch. Model 718XL is available with dual 32 watt tubes. Consult factory.

MODEL 716XL

30 watt 12VDC light. Suggested mounting opening: 20.125” x 5.313” x 1.25”. Overall

dimensions: 20.625” x 6.625” x 2.00”. 2.2 amps.

Includes two F15T8CW fluorescent tubes. 1650

design lumens. Rocker switch. 2.80 lb.

Extruded housing.

MODEL 712XL



Uses two F8T5CW fluorescent tubes. 800 design

lumens. Rocker switch. 1.98 lb.

Extruded housing.

MODEL 746 (FOR SHALLOW CEILINGS) 30 watt 12VDC light. Suggested mounting opening: 18.125” x 4.75” x 1.00”. Overall


Uses two F15T8CW fluorescent tubes. 1650

design lumens. Rocker switch. 1.58 lb.

Sheet metal housing.

MODEL 742 (FOR SHALLOW CEILINGS)



Uses two F8T5CW fluorescent tubes. 800 design

lumens. Rocker switch. 1.26 lb.

Sheet metal housing.

#716XL

#712XL

#746

#742






THIN-LITE CORPORATION 530 CONSTITUTION AVE




700 SERIES EURO-STYLE RECESSED


These Euro-Style Recessed light fixtures provide efficient lighting for elegant interiors. Designed especially for O.E.Ms,

they are easy to install in ceilings and under cabinets. They provide the “custom made” look in either the anodized

aluminum housing or molded frame. Injection molded frame or extruded acrylic diffuser lens add the finishing touch.

Model 736XL, offered with clear prismatic lens, delivers 15% more light. See photo of lens page 6, part number 716XL,

of this catalog.

MODEL 736 (FOR SHALLOW CEILINGS) 30 watt 12VDC light. Suggested mounting opening: 19.25” x 5.25” x 1.00”. Overall



1650 design lumens. Rocker switch. 2.35 lb.






MODEL 766 (FOR SHALLOW CEILINGS) 30 watt 12VDC light. Suggested mounting opening: 18.125” x 4.75” x .937”. Overall





16 watt 12VDC light. Suggested mounting opening: 12.25” x 4.75” x .937”. Overall




#736

#732

#766

#762



consult factory for current information. Other voltages, high humidity, and Dual RFI suppressant models are

available. Actual lumen ratings vary based on interior design of your vehicle. Specifications subject to change

without notice.

THIN-LITE CORPORATION 530 CONSTITUTION AVE CAMARILLO, CA 93012

700-1series Rev 4 July 2013


PHONE : (805) 987-5021 FAX: (805) 388-0921 E-MAIL: [email protected] 7



FLUORESCENT LIGHTING FIXTURES

170 SERIES LOW PROFILE

Low profile Thin-Lites are designed for use in areas that require light but have limited mounting space. Only 2.25” wide and 1.25” deep, they provide lighting in low profile area and aisle lighting. They fit nicely under cabinets and around mirrors. They feature anodized aluminum housings and clear acrylic diffuser lens.

MODEL NO.

171

172

173

174

179

WATTS

8

16

13

26

6

LAMP(S)

ONE F8T5/CW

TWO F8T5/CW

ONE F13T5/CW

TWO F13T5/CW

ONE F6T5/CW

VOLTAGE

12 VDC

12 VDC

12 VDC

12 VDC

12 VDC

AMPS

0.8

1.4

1.1

2.0

0.5

LUMENS

400

800

850

1700

295

SWITCH

PUSH BUTTON

NO SWITCH

PUSH BUTTON

NO SWITCH

PUSH BUTTON

DIMENSIONS

17.68”X2.25”X1.25”

29.75”X2.25”X1.25”

26.68”X2.25”X1.25”

47.75”X2.25”X1.25”

15.37”X2.25”X1.25”

mm 449.1X57.2X31.8 755.7X57.2X31.8 677.7X57.5X31.8 1212.3X57.2X31.8 390.4X57.5X31.8

WEIGHT

0.78 lb.

1.23 lb.

1.10 lb.

1.88 lb.

0.68 lb.

kg 0.354 kg 0.558 kg 0.499 kg 0.853 kg 0.309 kg


manufacturing improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will vary. Please consult

factory for current information. Other voltages, high humidity, and Dual RFI suppressant models are available. Actual

lumen ratings vary based on interior design of your vehicle. Specifications subject to change without notice.








FLUORESCENT LIGHTING FIXTURES

190 SERIES HI-EFFICIENCY STYLES

The 190 series offers highly efficient and compact designs rated from 6 to 30 watts. Anodized aluminum housings and

clear acrylic diffuser lenses deliver light in a 180 degree arc to maximize light output. Applications include commercial

and industrial vehicles, portable housing, schools, offices, and medical facilities powered by batteries and/or alternative

energy. The fixtures are available with almond or black end caps, with a clear diffuser lens.

MODEL NO.

191 / 291

193 / 293

195 / 295

197 / 297

P1954 / P2954

WATTS

8

15

17

30

32

LAMP

ONE F8T5/CW

ONE F15T8/CW

ONE F17T8/CW

ONE F30T8/CW

ONE 32T8SPX41

VOLTAGE

12 / 24VDC

12 / 24VDC

12 / 24VDC

12 / 24VDC

12 / 24VDC

AMPS

0.8 / 0.4

1.3 / 0.7

1.4 / 0.7

2.1 / 1

2.3 / 1.2

LUMENS

400

825

1250

2175

2950

SWITCH

ROCKER

ROCKER

ROCKER

ROCKER

NO SWITCH

DIMENSIONS

12.5”x2.60”x2.5”

18.25”x2.60”x2.5”

24.25”x2.60”x2.5”

36.25”x2.60”x2.5”

48.25”x2.60”x2.5”

mm 317.5x66.1x63.5 463.6x66.1x63.5 616.0x66.1x63.5 920.8x66.1x63.5 1226x66.1x63.5

WEIGHT

0.83 lb.

1.18 lb.

1.50 lb.

2.10 lb.

3.2 lb.

kg 0.377 kg 0.535 kg 0.681 kg 0.953 kg 1.45 kg



factory for current information. Other voltages, high humidity, and Dual RFI suppressed models are available. Lumen

ratings vary according to vehicle interior designs. Specifications subject to change without notice.








150 & 180 SERIES INDUSTRIAL & COMMERCIAL

These surface mount series can be used commercial, industrial, and even residential. They are designed for practical

applications where decorative styling and durability are desirable. They feature satin finished anodized aluminum housings

and clear diffuser lenses for maximum light output. All are designed for remote switching. Models 151 and 153 are supplied

with low profile end caps, no lens. These fixtures utilize standard 17 watt (24”) or 32 watt (48”) fluorescent tubes readily

available world-wide. **Lamp not included as noted below.

MODEL NO.

WATTS

LAMP

VOLTAGE

AMPS

LUMENS

SWITCH

DIMENSIONS

mm

WEIGHT

kg

153

32

ONE F32T8/CW**

12 VDC

2.3

2850

NO SWITCH or LENS

48.125”X3.375”X1.63”

1222.4 X 85.7 X 41.4

2.89 lb.

1.311 kg

151

17

ONE F17T8/CW**

12 VDC

1.2

1250

NO SWITCH or LENS

24.125”X3.375”X1.63”

612.8 X 85.7 X 41.4

1.55 lb.

0.703 kg

183

32

ONE F32T8/CW**

12 VDC

2.3

2850

NO SWITCH

48.125”X3.625”X3.5”

1222.4 X 92.1 X 88.9

3.69 lb.

1.674 kg

181

17

ONE F17T8/CW

12 VDC

1.2

1250

NO SWITCH

24.125”X3.625”X3.5”

612.8 X 92.1 X 88.9

2.29 lb.

1.039 kg


manufacturing improvements, UL listings for individual Thin-Lite and S.T Lighting fixtures will vary. Please consult factory

for current information. Other voltages, high humidity, and Dual RFI suppressant models are available. Lumen ratings vary

based on vehicle interior design and lamp specifications. All specifications subject to change without notice.







WEATHERPROOF FLUORESCENT

160 SERIES OUTDOOR AREA LIGHTS

Thin-Lite 160 series weatherproof outdoor area lights that feature anodized aluminum housings and aerodynamic design for

side & rear mounting. They provide superior security and area lighting for alternative energy sites, entry doors, and toy hauler

ramps they ensure clear visibility for parking, hitching or backing up. All models are supplied with either amber diffusers lens

to minimize insect activity or clear lens for maximum light output. Specify type of lens required when ordering.

MODEL NO.

WATTS

LAMP(S)

VOLTAGE

AMPS

LUMENS

SWITCH

DIMENSIONS

mm

WEIGHT

kg

161

8

ONE F8T5/CW

12 VDC

0.8

400

PUSH BUTTON

12.875”X3.80”X2.75”

327.1 X 96.5 X 69.9

1.45 lb.

0.658 kg

162

16

TWO F8T5/CW

12 VDC

1.4

800

PUSH BUTTON

12.875”X3.80”X2.75”

327.1 X 96.5 X 69.9

1.54 lb.

0.699 kg

163

15

ONE F15T8/CW

12 VDC

1.3

825

PUSH BUTTON

18.5”X3.80”X2.75”

469.9 X 96.5 X 69.9

2.04 lb.

0.926 kg

167

30

ONE F30T8/CW

12 VDC

2.1

2180

PUSH BUTTON

36.5”X3.80”X2.75

”

927.1 X 96.5 X 69.9

3.84 lb.

1.742 kg



consult factory for current information. Other voltages, high humidity, and dual RFI suppressed models are

available. Lumen ratings vary based on application and lamp specifications. Specifications subject to change

without notice.








COMPACT STYLES 900 SERIES SURFACE MOUNT

WITH DUAL RFI SUPPRESSION

Our 900 series fixtures were developed for efficient, attractive, and noise free operation where maximum light is required.

Anodized aluminum housings, clear acrylic diffuser, and full spectrum compact lamps provide true color rendering.

Their low profile makes them ideal for commercial and industrial vehicles, remote area housing, schools, mobile medical

offices, and storage cabinets where alternative energy and solar power are available. Supplied with or without rocker

switch, and compact fluorescent lamps that have minimum color rendering index (CRI) of 82.

MODEL #

WATTS

AMPS

DIMENSIONS

DESIGN LUMENS

WEIGHT

941

5

0.40

6.875” X 4.5” X 1.5”

250

0.76 lb.

943

7

0.58

6.875” X 4.5” X 1.5”

400

0.76 lb.

945

9

0.75

8.875” X 4.5” X 1.5”

600

0.94 lb.

947

11

0.90

12.875” X 4.5” X 1.5”

900

1.29 lb.

949

13

1.10

8.875” X 4.5” X 1.5”

900

0.94 lb.

951

18

1.50

12.875” X 4.5” X 1.5”

1250

1.29 lb.

953

24/27

2.00

14.875” X 4.5” X 1.5”

1800

1.65 lb.

957

36/39

2.30

18.875” X 4.5” X 1.5”

2850

1.85 lb.

All Thin-Lite Corporation products comply with and exceed most industry standards. However, due to

continued manufacturing improvements, UL listings for individual Thin-Lite and S.T Lighting fixtures will

vary. Please consult factory for current information. Other voltages and high humidity are available. Consult

factory. Lumen ratings vary based on application. Specifications subject to change without notice.









COMMERCIAL TRUCKS SERIES

These heavy duty light fixtures provide efficient lighting for commercial trucks. Black and silver anodized aluminum

housings complement interior color schemes. Injection molded or extruded acrylic diffuser lenses and frames add the

finishing touch and “custom made” look. Plug-in connectors match OEM commercial truck wire harnesses. Model 194

and Model 192 are available with almond end caps or black end caps. Consult factory for specific applications.

MODEL P716K (RECESSED) 30 watt 12VDC light. Suggested mounting opening: 20.125” x 5.313” x 1.25”. Overall


Includes two F15T8CW fluorescent tubes. 1650

design lumens. Noise free RFI ballast

Black housing.

MODEL 723F (RECESSED) 15 watt 12VDC light. Suggested mounting opening: 18.25” x 3.375” x 1.5”. Overall

dimensions: 20.125” x 4.3125” x 1.875”. 1.3

amps. Includes one F15T8CW fluorescent tube.

825 design lumens. Frame with diffuser lens.

MODEL P194NH

30 watt 12VDC light. 2.2 amps. Overall dimensions: 18.25” x 5.625” x 1.625”.


1650 design lumens. Three way rocker switch.

Noise free RFI suppressant ballast.

OEM Truck wire-harness stock

MODEL 115BKF 15 watt 12VDC light. 1.3 amps. Overall dimensions: 18” x 4” x 1.419”.

Includes one F15T8CW fluorescent tube.

825 design lumens. Black housing. No switch.

Available with rocker switch.

OEM Truck Wire-harness stock

#P716K

#723F

#P194NH

#115BKF







spseries Rev 4 July 2013





SPECIALTY & EMERGENCY SERIES


Standard models are shown below. Many variations are available with features including 12-28 VDC rated input, high

humidity ballasts, specialty lamps, custom wire termination, switching options, and housing finishes. Send

specifications, attention: Thin-Lite Engineering Dept., for consultation and quotation.

#184 #1952L

MODEL 184

24/27 watt 12VDC light. 2.0 amps Overall dimensions: 14.25” x 3.625” x 3.50”.

Includes one 24 w Dulux L or 27 w Biax Lamp.

Anodized aluminum housing & clear acrylic lens

1800 design lumens. No switch. Almond End caps

MODEL 1952L


Includes one F17T8/CW fluorescent tube.


1325 design lumens. No switch. Black End caps.

MODEL 186

36/39 watt 12VDC light. 2.3 amps. Overall dimensions: 18.125” x 3.625” x 3.50”.

Includes one 36 w Dulux L or 39 w Biax Lamp.


2850 design lumens. No switch. Almond End caps

MODEL 1954L




2850 design lumens. No switch. Black End caps.

MODEL 108 22 watt 12VDC light. Circuline Adaptor for table or swag lamps.

1.6 amps.

Includes one FC8T9/CW fluorescent tube.

1100 design lumens.

#108








Sp1series Rev 4 July 2013





SPECIALTY LOW PRESSURE SODIUM LIGHTS


Thin– Lite’s NBX lights are applicable for high lumen applications, and VFI lights are applicable for refrigerated trucks

and car carriers.

MODEL P716NBX 39 watt 12 or 24 VDC input. Suggested mounting

opening: 20.125” x 5.3125” x 1.25”.

Overall dimensions: 20.625” x 6.625” x 2.00”.

2.3 amps. Includes one 39 watt Biax lamp. 2850 design

lumens. Anodized aluminum housing. Injection molded

acrylic diffuser lens.

No switch

MODEL P718NBX

78 watt 12 or 24 VDC input. Suggested mounting opening: 38.609” x 5.3125” x 1.25”. Overall dimensions: 39.00” x 6.625” x 2.00”. 4.6 amps.

Includes two 39 watt Biax lamps. 5700 design lumens.

Anodized aluminum housing. Injection molded acrylic

diffuser lens. No switch

MODEL VFI-30PT (Weather resistant) 30 watt 12 or (24) VDC input. 2.1 or (1 amp), 1.5” OD x 44.25” L. Includes one

F30T8/CW lamp rated at 2175 design

lumens. Supplied with 12” 18-2 lead &

SJT 2/C ring terminals. Flexible, snap

lock, mounting brackets available. Order

P/N VFI-BKT-Pair. Models supplied with

18”, 24” and 48” lamps also available.

All Thin-Lite Corporation products comply with and exceed most industry standards. However, due to continued manufacturing

improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will vary. Please consult factory for current information.

Other voltages, high humidity and RFI suppressant are available. Consult factory. Lumen ratings according to lamp manufacturers’ 60Hz

data for CW lamp. Specifications subject to change without notice.







SPECIALTY


Model 800 mounts anywhere, is light weight, and 5 times more efficient than conventional incandescent & halogen

dome lights. DIST-VFI-15 features replaceable lamp, can be submersed in water to attract bait, self-retracting cord that

extends to 10 FT, cigarette lighter adapter & mounting brackets. Specify model OEM-553 for recessed applications.

DIST-553 is designed for surface plug in applications, mounting collar included. All models are available in 12 VDC

or 24VDC versions. Send specifications to receive quotation for additional features.

MODEL 800 (Dome Light)

Dual CF 7 watt 12VDC light. 1.2 amps Overall dimensions: 7.5 “x 7.5” x 1.855”.

Includes two CF7DS/E fluorescent Lamp.

Powder coated aluminum housing & opaque

acrylic diffuser lens. Rocker switch. Injection

molded frame.

MODEL 553 (Wet Location)

PL 24/27 watt lamp draws 2 amps at 12 VDC or 1 amp at 24 VDC input. Overall dim: 19.72” X

6.82” X 2.02”, opening dim.15.5” x 4” x 1.6”.

Lamp rated at 1800 design lumens. Sealed

anodized aluminum housing & clear acrylic lens.

Injection mold end cap.

MODEL 199PL PL 13 watt 12VDC light. 1.1 amps. Overall dimensions: 9.5” X 2.6” X 2.5”.

Includes one 13 w PL Lamp. Anodized aluminum

housing & clear acrylic lens. 900 design lumens.

Rocker Switch. Almond End caps

MODEL VFI-15 (Wet Location) 15 watt 12VDC light. 1.3 amps. Overall dimensions: 1.5” Dia. x 26 Long”


Clear polycarbonate tube. Vinyl end caps.

Mounting bracket and Cigarette plug in adapter

Included.








sp4series Rev 4 July 2013





RFI SUPPRESSANT

ELECTRONIC INVERTER BALLASTS

Thin-Lite electronic quiet ballasts operate at 30,000 cycles for maximum efficiency. Dual or single stage RFI

circuitry is offered to ensure quite, noise free, operation. We manufacture ballasts to power fluorescent, low

pressure sodium, and germicidal lamps rated from 6 to 32 watts. Consult factory for specifications to meet your

requirements. Dual stage ballasts, designated by “P” prefix, are listed below. When specifying single stage RFI

models omit the “P” prefix.

OPEN ENCLOSED

MODEL # WATTS LAMP MODEL # WATTS LAMP

OIB-P109 22 ONE FC8T9/CW OIBC-P109 22 ONE FC8T9/CW

OIB-P111 8 ONE F8T5/CW OIBC-P111 8 ONE F8T5/CW

OIB-P112 16 TWO F8T5/CW OIBC-P112 16 TWO F8T5/CW


OIB-P116 30 TWO F15T/CW OIBC-P116 30 TWO F15T8/CW










consult factory for current information. Other voltages, high humidity, and dual RFI suppressant models are

available. Lumen ratings will vary based on surface textures and reflectivity of interior colors. Specifications

subject to change without notice.







ST 100 SERIES INDIRECT VALANCE SERIES

FLUORESCENT STRIP LIGHTS

The ST 100 series strip lights provide soft even light to accent headliners, valances, ceilings, closets, under cabinet and

shelving areas where lenses are not required. The lightweight aluminum housing and narrow profile allow for unlimited

applications to accent your interior designs. Fixtures are shipped complete with fluorescent tubes. Supplied without switch or

lens.

MODEL NO.

WATTS

LAMP

VOLTAGE

AMPS

LUMENS

DIMENSIONS

mm

WEIGHT

kg

101

8

ONE F8T5/CW

12 VDC

0.8

400

17.75”X 2.15”X1.25”

450.9 X 54.6 X 31.8

0.46 lb.

0.209 kg

103

15

ONE F15T8/CW

12 VDC

1.3

825

23.437”X2.15”X1.625”

595.3 X 54.6 X 41.3

0.70 lb.

0.318 kg

105

17

ONE F17T8/CW

12 VDC

1.2

1250

29.437”X2.15”X1.625”

747.7 X 54.6 X 41.3

0.80 lb.

0.363 kg

107

30

ONE F30T8/CW

12 VDC

2.1

2175

41.437”X2.15”X1.625”

1052.5 X 54.6 X 41.3

1.05 lb.

0.477 kg




available. Lumen ratings will vary based on surface textures and reflectivity of interior colors. Specifications









ST 130 SERIES SURFACE-MOUNT


The ST 130 series features powder coated aluminum housings and acrylic diffuser lens. They deliver even, non-glare, lighting

to ensure a stress free work environment. No hot-spots or eye strain. Decorative Cracked Ice lenses and gold housings are

supplied on Model 130CI and Model 134CI. Plain lens and gold finish is standard on model 138. Specify model 130W, 134W

and 138W to receive white finished housing.

MODEL NO.

130

134

138

139

139-2

WATTS

16

30

34

32

64

LAMP(S)

TWO F8T5/CW

TWO F15T8/CW

TWO F17T8/CW

ONE F32T8/CW

TWO F32T8/CW

VOLTAGE

12 VDC

12 VDC

12 VDC

12 VDC

12 VDC

AMPS

1.4

2.2

2.4

2.3

4.6

LUMENS

800

1650

2500

2850

5700

SWITCH

ROCKER

ROCKER

ROCKER

ROCKER

ROCKER

DIMENSIONS

12”X 5.375”X1.75”

18”X5.375”X1.75”

24”X5.375”X1.75”

48”X5.375”X1.75”

48”X5.375”X1.75”

mm 304.8X136.6X44.5 457.2X136.6X44.5 609.6X136.6X44.5 1219.2X136.6X44.5 1219.2X136.6X44.5

WEIGHT

1.15 lb.

1.62 lb.

2.28 lb.

2.76 lb.

3.55 lb.

kg 0.522 kg 0.735 kg 1.034 kg 1.252 kg 1.611 kg




available. Actual lumen ratings vary based on reflective values and textures of structure interior. Specifications









20

INCANDESCENT

LIGHT FIXTURES

MODEL 160I18A (PORCH LIGHT) VOLT: 12VDC AMPS: 1.4 AMPS, WEIGHT: 0.64 LB

HOUSING: EXTRUDED ALUMINUM

FINISH: CLEAR SATIN ANODIZED

END CAP: BLACK INJECTION MOLDED LENS: ACRYLIC AMBER

LAMP: #921 WEDGE BASE

DIMENSIONS: 6.5” X 3.875” X 2.75”

MODEL 160I18C (PORCH LIGHT) VOLT: 12VDC AMPS: 1.4 AMPS, WEIGHT: 0.64 LB

HOUSING: EXTRUDED ALUMINUM

FINISH: CLEAR SATIN ANODIZED

END CAP: BLACK INJECTION MOLDED LENS: CLEAR ACRYLIC

LAMP: #921 WEDGE BASE

DIMENSIONS: 6.5” X 3.875” X 2.75”

MODEL 311-1 VOLT: 12VDC AMPS: 1.44 AMPS, WEIGHT: 0.34 LB

HOUSING: ABS WHITE PLASTIC

LENS: CLEAR POLYCARBONATE

LAMP: ONE #1141

DIMENSIONS: 8.175” X 5.0” X 1.5”

SWITCH: SLIDE WITH IN BEZEL

MODEL 312-1

VOLT: 12VDC AMPS: 2.88 AMPS, WEIGHT: 0.53 LB

HOUSING: ABS WHITE PLASTIC

LENS: CLEAR POLYCARBONATE

LAMP: TWO #1141

DIMENSIONS: 11.43” X 5.0” X 1.5”

SWITCH: SLIDE WITH IN BEZEL


continued manufacturing improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will

vary. Please consult factory for current information. Specifications subject to change without notice.



Sp6series Rev 4 July. 2013


PHONE: (805) 987-5021 FAX: (805) 388-0921 E-MAIL: [email protected]



REPLACEMENT LAMPS

PACKAGE

F8T5/CW/TWIN & F15T8/CW/TWIN Cool

White, 4100K, produces a bluish white light

reminiscent of moonlight on cold snow. Thin-

Lite branded lamps are factory tested and

approved for maximum light output and lamp

life. Consult factory for other wattages.

F8T5/WW/TWIN & F15T8/WW/TWIN

Warm White, 3000K, emphasize reds, yellows, and oranges reminiscent of

candlelight & soft glow of a cozy fire to match

the color, tone, and ambience of incandescent

light. Creates a friendly, intimate atmosphere

without compromising light output.


continued manufacturing improvements, UL listings for individual Thin-Lite and S.T. Lighting fixtures will

vary. Please consult factory for current information. Specifications subject to change without notice.








530 Constitution Ave. Camarillo, CA 93012 805-987-5021 Fax: 805-388-0921

E-mail: [email protected] www.thinlite.com

Recommended Installation procedure for all Thin-Lite Products.

1) Which size wire should I use for installation?

We recommend you use 16- gauge wire for optimal installation of a single fixture. Please see note below

under “How much voltage drop is in my circuit?”

2) What is the recommended Voltage at the battery?

Test input voltage at mounting location of fixture. Thin-Lite 12VDC fixtures are designed for optimal

performance with input power of 12VDC + 2 VDC/ -1.5 VDC.

How much voltage drop is on my circuit?

First, test the voltage on the circuit at the battery. Next, test the voltage at the farthest fixture on a series or loop run. Subtract the fixture voltage from the battery voltage. This is the amount of voltage you have lost

through your wiring, or your voltage drop. The optimal voltage for lighting is between 13.2 volts and 10.8

volts.

How do I fix a voltage drop problem? You can fix a voltage drop problem a few different ways: a) Increase the wire size. Larger wire has a lower resistance, and less voltage drop will occur. See table 1.

CAUTION: DO NOT OVER-AMP WIRE; IT CAN CAUSE FIRE DANGER! b) If you are using a series run, you can reduce voltage drop by changing it to a loop or T run.

Wire Gauge Max Amps Max Watts Resistance Per foot

12 16 192 .00162

10 24 288 .00108

8 32 384 .00064 Table 1

3) How do I mount the fixture?

a) Carefully remove lens and when necessary remove lamps and reflector to locate mounting

holes in fixture chassis. b) Attach black wire from fixture to + (positive) power input lead with wire nut or similar

connector (not supplied).

c) Attach white wire from fixture to - (negative) power input lead. d) Mount fixture on flat surface. Use with at least two threaded fasteners (not supplied).

e) Re-install reflector and lamp(s) and test unit for proper operation.

f) Carefully re-install lens.

22 Info1 Rev 3 Aug. 2012



530 Constitution Ave. Camarillo, CA 93012 805-987-5021 Fax: 805-388-0921

E-mail: [email protected] www.thinlite.com

TROUBLESHOOTING ALL FLUORESCENT FIXTURES

Caution and Safety: Troubleshooting techniques require measurements with input voltage applied

requiring extra precautions to avoid electrical shock, please use caution and safety. Use proper

safety equipment such as eye protection and gloves when performing electrical measurements.

Most problems with lights occur when power is interrupted to the light fixture or when the light bulb

or its socket is defective.

If you are not comfortable working with electrical wiring, voltage testers, and the like, try a few

simple procedures detailed below, but, if those do not solve the problem, call an electrician.

ELECTRICAL TEST EQUIPMENT

The following equipment is recommended for testing fluorescent fixtures:

True RMS Voltmeter (voltage ranges 0 to 1000 Volts AC and frequency range of at least 500 KHz for

electronic measurements. Ammeter (clamp-on type acceptable) for magnetic ballast current

measurements and electronic ballast input current measurements. Ranges: 0 to 10 amperes AC with at

least one range 0 to 250 milli-Ampere (mA). Magnetic ballast input and output voltage and current

frequencies are 60 Hz. Input voltages and current frequencies for electronic ballasts are 60 Hz, but the

output frequency of most electronic ballasts is above 40 KHz.

INOPERATIVE FIXTURE- Why doesn't my light fixture work?

Often a fixture becomes inoperative due to causes not attributable to the ballast. It is therefore important to

examine all fixture components before removing the ballast for replacement. We recommend you read the

following:

Question 1- “I have completed the installation but my lights do not turn on”

Check battery voltage.

Check switch on fixture or on Wall.

Check all connections for a bad contact. Make sure all wiring & connections are secure.

Check the line (battery) side of the wiring. Make sure that power is being supplied to the fixture.

Replace or check all lamps to ensure satisfactory operation.

As lamps are removed, examine all sockets to ensure they are not damaged or broken and are making

proper and positive contact with the lamps.

Make sure all lamp sockets are seated properly into sockets.

Examine all electrical connection within the fixture, including at the lamp sockets, to ensure

conformance with the wiring diagram on the ballast.

If it still will not light, check the voltage at the light. Recommended operating voltage is between 11

and 14 VDC.

Info2 Rev 3 Aug. 2012 23



Voltage drop due to loose connections at 12V fused distribution panels is not uncommon in mobile

applications. Adjust torque where needed. Improperly tightened fasteners may reduce voltage

delivered to 12V lights and accessories.

If one or more light fixtures are controlled by a wall switch verify that it is a DC rated switch. The

"DC Rule of Thumb" is “ a switch that is rated at 15A 125VAC will likely perform satisfactorily at

15 amps 12VDC.” Contacts on a non-DC rated switch may become corroded. This increases

resistance and reduces voltage levels. Check voltage at all wall switches and replace if defective or

voltage reading is below 12VDC.

Check all connecting points on the 12VDC wiring harness for corrosion. Clean as needed.

If there is no voltage at the light, check the wire to make sure they are connected. Black wire is

positive (+) and white wire is negative (-). Fixtures are protected against reversed polarity. If

improperly connected, the fixture will simply not turn "on". If the wires are connected properly, and

there is still no voltage to the light, check voltage at battery and fuse box.

Question 2 - “Some of my lights turn on, but not all of them”.

Follow instructions for Question 1 first.

Check for any bad contact between the fixtures. Make sure the bulb is plugged securely in the socket of the problem light fixture(s).

Make sure that the fixture is installed correctly. Check the line (battery) side of the wiring. Make sure that power is being supplied to the fixture.

Question 3- “When I turn on the lights, they flicker”.


Check for bad contact between the problem fixture(s). Make sure all bulbs are securely plugged into

the bulb sockets.

The flickering should only be momentary, as it is a built-in protection mechanism against power

surges.

If lamps still flicker, remove lamps from sockets and re-install them in the opposite direction.

Question 4- “My lights are on, but they are dim”.


Make sure all bulbs are fully and securely plugged into the bulb sockets. Make sure you are not using a dimmer or your fixtures are not connected to a system that features

“cinema” (automatic dimming feature at shut-off) lighting , Thin-Lite do not recommend dimmers

or the such, this will revoke the warranty.

Question 5- “My lights work for a while, but then they shut off”.


Check for bad contact between the fixture(s) and track. Make sure all bulbs are securely plugged into

the bulb sockets.

Replacement Fluorescent Lamps for Thin-Lites These are standard Lamps, and may be available at your local hardware or can be ordered through local distributor.

24

Info3 Rev 3 Aug. 2012

FLUORESCENT LAMP TYPES Fluorescent lamps sold in the United States today are available in a wide variety of shapes and sizes ranging

from miniature versions, rated at 4 watts, 6" in length and 5/8" diameter, to 215-watt types, 96" long and 2"

in diameter. Commercially available fluorescent lamp types include T12, T8, and T4 compact and T5-linear

and compact. Base types include bi-pin, single pin, several compact bases and recessed double contact.

LAMP LIGHT OUTPUT

Lumens are the measurement for lamp light output. Fluorescent lamps are measured in initial lumens or in

design lumens. Initial lumens are a measure of the amount of light that the lamp produces after about 100

hours of operation. Design lumens are a measure of the amount of light that the lamp produces after it has

operated for approximately 40 percent of its rated life. Because light output from a fluorescent lamp

diminishes over the life of the lamp - a process known as Lamp Lumen Depreciation - a lamp's design

lumens (or mean lumens) are always lower than its initial lumens. Lumen maintenance refers to the rate at

which light output declines over time and lumen maintenance percentages are typically based on light output

at 40% of a lamp's rated life.

LAMP LIFE Lamp Life is a measure of how long a fluorescent lamp operates and determined by that point in time when

50% of the lamps have failed. Lamp life is a function of emitter depletion - when you run out of emitter

emission material the lamp will no longer operate. Some lamps will last longer than the rated life and some

fail sooner.

Starting methods, switch cycles, the type of ballast used and other factors can significantly affect lamp life.

In general, life ratings for fluorescent lamps range from 6,000 to 30,000 hours based on the industry standard of three burning hours per start.

LUMENS PER WATT Lumens per Watt are a rating of a lamp's light output in relation to the current passing through it or the watts

it uses. The more efficient a lamp, the more lumens it will produce per watt of power consumed. This

measurement (LPW) is also referred to as lamp "efficacy".

What does CW mean?

Alphabetic suffix that follows lamp part number, e.g., F15T8/CW, designates color temperature of lamp. The

correlated temperature of a light source is expressed in Kelvins (K) and is a means of describing the

appearance or chromaticity of the source itself. It describes the apparent whiteness of the lamp. Incandescent

lamps deliver a limited color temperature range between 2700K and 3000K the same color range as a warm

white fluorescent lamp.

Fluorescent lamps offer a wide choice of color temperatures from cool white (CW) 4100K that produces a bluish white light reminiscent of moonlight on cold snow; Warm White (WW) 2700K to 3400K light with a

yellowish tint, reminiscent of fireplaces and candlelight to Daylight (D) 6000-6500K that is typical of mid-

morning daylight entering through a window on a sunny day.

What is the difference between Fluorescent, incandescent and LED lamps?

Incandescent Lamps: Regular incandescent lamps produce light by passing an electric current through a

filament in a vacuum or gas filled bulb. They provide low initial cost, good color rendition and excellent

optical control.

Halogen Lamps: Halogen lamps also use a filament; but since it is sealed in a pressurized capsule containing

halogen gas, the lamp provides brighter, whiter light and improved energy efficiency.

LED Lamps; Light from LEDs is concentrated in a beam. Refractive lenses are used to diffuse and spread the

beam but this dramatically reduces light output. They are a good choice if mounted close to the work surface.

LED’s are not recommended for lighting large areas where a wide dispersal of light is needed. Fluorescent

fixtures are the most efficient source of light for illuminating a large area.

Info4 Rev 3 Aug. 2012 25

Linear Fluorescent Lamps: Are 4-5 times more efficient than Halogen or Incandescent lamps. In a

fluorescent lamp, an electric arc passing between cathodes in a tube excites mercury vapor and other gases

and produces UV radiant energy. A phosphor coating on the tube then converts this energy to visible light.

Fluorescent lamps are very energy efficient and provide a wide range of color responses.

Compact Fluorescent Lamps: Compact fluorescent lamps employ small diameter tubes that are bent so they

begin and end in a ceramic base. This allows them to be produced in a wide variety of configurations, greatly

extending the applications for fluorescent lighting.

Relative Efficiency

*32 watt T8 fluorescent 89 to 95 lumens/watt

Standard F40T12 cool white fluorescent 60-65 lumens/watt

Compact fluorescents 60 to 100 lumens/watt

T3 tubular halogen 20 lumens/watt

White, Warm White LED’s 55–75 lumens/watt

Standard 100 watt incandescent 17 lumens/watt

Incandescent night light bulb (7w) 6 lumens/watt

* F32T8 lamps supplied with Thin-Lite fixtures meet or exceed 2009 Department of Energy Lumens per

Watt Regulations effective July 14, 2012.

What is the warranty policy?

The warranty extends to the original purchaser for two years but commercial applications have one-year

warranty. It is limited to rectifying any such defect and/or replacing such defective part, except lamps,

provided the fixture is returned prepaid, with proof of purchase to: Thin-Lite Corp, Attn: QA, 530

Constitution Ave, Camarillo, Ca. 93012. If the fixture has been superseded (new design replaces older

design) replacement will be made with a current model of the same quality performing the equivalent

function. This warranty does not cover labor costs for installation or removal of light fixture and is void on

any light fixture that has been improperly installed, overloaded, abused or altered in any way. Other than the

above described obligation, Thin-Lite Corp. assumes no further liability with respect to the sale or use of its

products.

Limited Lifetime Warranty To Original Purchaser

After two years from the date of purchase (except commercial applications-one year), if the inverter ballast

fails, Thin-Lite Corp. will repair or replace most fixtures with a current production model at a flat rate.

Customer is responsible for freight charges from his location to Thin-Lite factory. UPS ground charges for

return of repaired fixture to customer is included in the flat charge.

26 Info3 Rev 3 Aug. 2012

LOW VOLTAGE FLUORESCENT LIGHTING PRODUCTS

Documents

Transcript of LOW VOLTAGE FLUORESCENT LIGHTING PRODUCTS