Low cost small wind energy solutions for residential …manufacturing of specialized components of...

Ref: TRUK20140602001 of 16

Printed: 25 June 2014

Technology Request

Low cost small wind energy solutions for residential and commercial applications

Summary

An Indian company that is globally engaging and a pioneer in introducing technologies in various areas of clean tech and green energy. The company is looking for manufacturing tie up and technology collaboration to commercialise their patent pending vertical small wind turbines and axial flux generator. The partner is expected to form a joint venture or manufacturing agreement or technical cooperation or reasearch greement, infuse equity, provide technical expertise in manufacturing.

Creation Date 06 July 2015

Last Update 23 July 2015

Expiration Date 22 July 2016

Reference TRIN20150706001

Details

Description

The Gyroscopic Axial Flux Turbine (GAFT) is used for low cost rural electrification applications, where local energy production from small wind turbines, hydro turbines, tidal turbines are considered. It is capable of converting to automobile motor also due to its design. GAFT converts kinetic/ mechanical energy into electrical energy in the most efficient way which makes it a fuel-less device. Permanent magnets placed on twin gyroscopic disc which rotates in proximity of magnetic wire which also uses the flywheel inertia in order to generate energy efficiently in wind turbines, hydro turbines, tidal turbines, automobile, etc. It is looking for EU companies who have expertise in this field and who are already in the forefront of cutting edge technology in renewable energy in the form of joint venture, manufacturing of specialized components for these systems and technical cooperation agreement to provide technical expertise. The company can also provide cost efficient manufacturing facility.

Technical Specification or Expertise Sought

The company is seeking an established EU partner with expertise in areas of manufacturing of specialized components of small wind turbine systems and axial flux generators.

Stage of Development

Ref: TRUK20140602001 of 16


Prototype available for demonstration

Comments Regarding Stage of Development

patent pending working prototype ready that has met targeted power output

IPR Status

Patent(s) applied for but not yet granted

Comment Regarding IPR status

Patent pending in India

Keywords

Technology

002010001 Aeronautical technology / Avionics

004002011 Turbines

004005010 Wind energy

004008 Energy efficiency

011001 Socio-economic development models, economic aspects

Market

006005004 Wind energy

006005010 Other alternative energy

006009001 Other energy production

006014 Energy Storage

NACE

Q.88.9.9 Other social work activities without accommodation n.e.c.

Dissemination

Send to Sector Group

Environment

Client

Type and Size of Organisation Behind the Profile

Industry SME 11-49

Year Established

Ref: TRUK20140602001 of 16


2013

Already Engaged in Trans-National Cooperation

No.

Languages Spoken

English

Client Country

India, Republic of

Partner Sought

Type and Role of Partner Sought

The EU company should be willing to form a joint venture or manufacturing agreement or technical cooperation agreement with the Indian company, infuse equity, provide technical expertise in manufacturing of specialized components of small wind turbine systems and axial flux generators.

Type and Size of Partner Sought

SME 11-50,Inventor,R&D Institution,SME <10,>500 MNE,251-500,SME 51-250,>500

Type of Partnership Considered

Manufacturing agreement Commercial agreement with technical assistance Technical cooperation agreement Joint venture agreement Research cooperation agreement

Ref: TRUK20140602001 of 16


Technology Offer

Development of a tool for the valuation of public green and open spaces

Summary

A German university has developed an electronically supported method for assessing the value of public green and open spaces. The tool has been developed to assist companies or local authorities to register the current value of their green, tangible assets like parks, trees or playing fields on a reference day for the purposes of double-entry accounting. The tool is ready for the market and a license agreement is considered as type of partnership.

Creation Date 02 June 2015



Reference TODE20150602011

Details

Description

A research project of a German University has developed a system which asseses the value of public green and open spaces for the purpose of a reliable controlling. A computer-based system has been established, with the cooperation from representative local authorities and a service provider, which will allow (in the moment) Germany-wide comparisons of the results to be made. Only in this way the objectives for the administrative modernisation (effective controlling and benchmarking between authorities, informed decisions about Public-Private-Partnerships) can be met. Due to the specific federal situation in Germany a highly flexible set of adjustable parameters allows any tailor-made application. Therefore it might be transferred to any other country or authority. The tool for carrying out the green spaces evaluation can firstly incorporate and broaden existing theoretical approaches. Secondly, the specific features of construction, resignation and care and maintenance of green and open spaces thereby assures a sound evaluation. To develop the evaluation tool for different local authorities, a general catalogue for the inventory of the municipality's green and open space inventory is available. Furthermore, general definitions for components in these areas are catalogued. Resulting from the research project characteristic cost values as a basis are readily available. These values allow the identification of realistic proices of the green properties, if there are no recent

Ref: TRUK20140602001 of 16


construction or acquisition costs known. The university is looking for license agreements in order to transfer right to use this new developed method.

Advantages and Innovations

The electronically supported tool is supplied by a cost database and generates characteristic cost values for the various spatial elements (e.g. trees, shrubs, paved areas). Furthermore, object specific adjustments are possible. Therefore the tool is the unique offer for local authorities (or companies taking over the duties in this field) for a realistic evaluation of public properties.


Field tested/evaluated

IPR Status

Exclusive Rights

Profile Origin

National R&D programme

Keywords

Technology

001003005 e-Government

001003007 GIS Geographical Information Systems

007001001 Agriculture Machinery / Technology

007002001 Forest technology

Market

002007027 Other software related

NACE

A.02.4.0 Support services to forestry

Dissemination


Environment

Ref: TRUK20140602001 of 16


Client


University

Year Established

0


No.

Languages Spoken

English German

Client Country

Germany

Partner Sought


Examples for the type of partner sought are local authorities, SME, or the industry. The Company is aiming for specific areas of activity like landscaping or landscape management, valuating property in public green and open spaces for accounting purposes relating to the introduction of double-entry accounting. Adjustments of the system to specific needs are tasks to be performed.


SME 11-50,Inventor,SME <10,>500 MNE,251-500,SME 51-250,>500


License agreement

Ref: TRUK20140602001 of 16


Technology Offer

Durable porous surfaces for driveways and paths from recycled tyres

Summary

A UK based SME has developed a new process to enable the use of rubber crumb from recycled tyres in a durable, load bearing, porous material suitable for driveways and paths. The system uses no solvents and is highly competitive in price when compared to alternative porous surface materials. The company is open to technical cooperation agreements, joint venture agreements and license agreements.

Creation Date 14 July 2015



Reference TOUK20150714001

Details

Description

Millions of used tyres from vehicles represent a massive global waste problem. Aside from burning these for energy, there are very few ways to recycle and reuse these materials. One method is the use of rubber crumb as a ground surfacing material. The traditional application is for children's adventure playgrounds but the market for this is very small. This material is also unsuitable for any load bearing applications and is prone to breaking up. An SME with expertise in tyre shredding has developed a new binder for rubber crumb that significantly hardens the rubber into an extremely durable material suitable for large areas such as driveways, paths and industrial areas whilst remaining porous. The company is now seeking to introduce their system into the market and is looking for new partners who have an interest in recycling tyres and developing products from the materials. They are therefore interested in technical cooperation agreements for developing new applications, possible joint venture agreements and also licensing the use of the technology for specific applications in new markets.


- Cold process that uses no solvents - extremely durable surfacing material - uses a readily available, cheap material - porous (meets Sustainable Drainage System (SUDS) requirements) - suitable for driveways, paths, shed foundations, caravan sites, cycle paths and industrial surface uses - no weeds/puddles - reduces frost formation

Ref: TRUK20140602001 of 16


- can be made non-porous for other applications


Available for demonstration

IPR Status

Secret Know-how

Profile Origin

Other

Keywords

Technology

002007016 Rubber

003002 Process Plant Engineering

003004010 Special chemicals, intermediates

010003004 Recycling, Recovery

Market

007006 Other Consumer Related (not elsewhere classified)

008001009 Speciality/performance materials: producers and fabricators

008004002 Chemical and solid material recycling

008004004 Other pollution and recycling related

NACE

E.38.3.2 Recovery of sorted materials

E.39.0.0 Remediation activities and other waste management services

F.42.1.1 Construction of roads and motorways

F.42.9.9 Construction of other civil engineering projects n.e.c.

F.43.9.9 Other specialised construction activities n.e.c.

Dissemination


Environment

Ref: TRUK20140602001 of 16


Client


Industry SME <= 10

Year Established

0


No.

Languages Spoken

English

Client Country

United Kingdom

Partner Sought


Type of partner sought - SME or larger company Specific area of activity of the partner - recycling tyres, construction, re-surfacing Task to be performed by the partner sought - develop new products, licence the technology for specific use, explore possible joint venture activity


SME 11-50,SME <10,>500 MNE,251-500,SME 51-250,>500


License agreement Technical cooperation agreement Joint venture agreement

Ref: TRUK20140602001 of 16


Technology Offer

Non-chemical (physical) water treatment devices for hard water treatment

Summary

A Slovakian company has designed non-chemical devices for treating hard water anywhere where boiler scale and sediments are created as a result of water temperature or pressure changes e.g. in boiler rooms, heat exchangers, compressor plants, etc. They operate by alternating current induction to change the supermolecular structure of treated water. The company is looking for partners for further technical development and testing.

Creation Date 25 October 2013



Reference BICBA019

Details

Description

An East-Slovakian Company designed non-chemical water treatment devices. These devices are used for hard water treatment anywhere where boiler scale and sediment is created as a result of water temperature or pressure changes e.g. in boiler rooms, heat exchangers, compressor plants, etc. This results in hard water obtaining soft water properties, but it does not create scale and it is able to dissolve and remove its old deposits. The units operate on the principle of changing the supermolecular structure of treated water by alternating current induction. The system includes an electronic unit and a winding (coil). The units are designed according to flow rate, velocity of flowing water and piping diameter. 50 standard models are available for home and industrial applications capacity from 0,1 m3/h up to 5 500 m3/h. Current and Potential Domain of Application: Service water supplies, heat exchangers, boiler rooms, compressor plants, bakeries, laundries, hotels, motels etc.


- No chemicals needed for water treatment to protect various appliances against scaling - Environment protection - Constant chemical composition of the treated water - Simple and fast installation without interrupting a pipeline - Water treatment for piping with diameter from 10 mm - 1000 mm - Much lower investment, operation and maintenance costs compared with other methods of water

Ref: TRUK20140602001 of 16


treatment - Very competitive prices compared with world's famous producers - Very high quality - ISO 9001 certification - Three years guarantee, one-year money back guarantee


Already on the market

IPR Status

Copyright

Comment Regarding IPR status

- Intellectual Property Rights (countries, date, ref...) Reg. by the Authority for industr. property No. 00053/93 - Slovakia No. 2096/93 - Czech rep. - CB certificate

Profile Origin

Private (in-house) research

Keywords

Technology

002006006 Pipeline Technology

003001001 Cleaning Technology

005006005 Physics of Fluids

005009 Separation Technologies

010002003 Ecology

010002004 Environmental Engineering / Technology

010002009 Water Pollution / Treatment

Market

008004 Pollution and Recycling Related

008004003 Water treatment equipment and waste disposal systems

009008002 Water, sewerage, chemical and solid waste treatment plants

009008004 Other utilities and related firms

NACE

E.36.0.0 Water collection, treatment and supply

Ref: TRUK20140602001 of 16


Client


Industry SME 11-49

Year Established

0


No.

Languages Spoken

English Slovak Czech

Client Country

Slovakia

Partner Sought


The company is looking for partners for further technical development and testing.


Commercial agreement with technical assistance Technical cooperation agreement

Ref: TRUK20140602001 of 16


Technology Offer

Biogas and bio-fertilizer produced from wastes for renewable energy

Summary

Hungarian environmental engineering firm is looking for partners to elaborate and design waste management systems and pursuing research and development activities related to renewable source within a technical cooperation or research cooperation agreement. The company is also interested in utilisation of renewable energy sources more closely energy recovery from biomass. The Hungarian firm is looking for technical cooperation partners to this activity as well.

Creation Date 11 June 2014



Reference TOHU20140604001

Details

Description

Hungarian company was estabilished in 1996, the main activity is environmental engineering. The enterprise has outstanding references in Hungary in the field of regional waste management project and the recultivation of waste disposal utility and existing landfill site, as well as the designing biogas plants related national and international tenders. Biogas is one of the renewable energy sources of future. It can be generated from organic manure, secondary products and wastes from food industry, agricultural residues, household-wastes and municipal waste water. These wastes are fermented by bacterias and through fermentation, great volumes of biogas can be generated. The energy content of biogas is 2/3 of the natural gas. Electric and heat energy can be generated by the burning of biogas in gas engines. Through fermentation the remains can be used as bio-fertilizers. Biogas can be transformed to energy with 90% efficiency. By the implementation of integrated waste management system the volume of the disposal of wastes by land filling can be minimalized. The company has versatile experience in design and develop such innovative solutions with which wastes can be treated and utilized with environmentally friendly and economical ways. The works of the company consist mainly of design and planning of public utility infrastructure and providing consultancy for local governments. Earlier many drinking water programs were designed and constructed by the company in the region.Then the company started to expand into another field by planning of sewer systems and sewage treatment plants. Due to a national program with a proposal on the integrated utilization of biodegradable wastes, the company has elaborated it in the region. The company offers services in the following fields:

Ref: TRUK20140602001 of 16


• designing technologies, facilities for waste collection, separation, utilization,

• preparing waste management programs, feasibility studies, environmental projects,

• environmental review of existing landfills,

• making recultivation plans for landfills,

• technical assistance for design, licensing,

• preparing documents, tenders, applications concerning waste management

• designing drinking water purification technologies,water management technologies of swimming

pools, sewerage systems, waste-water treatment plants, industrial waste water treatment technologies and preparing licence applications, • algae cultivation, remediation of old landfill sites

The enterprise prepared the recultivation plans for more than 250 old landfill dumps, designed one of Europe largest biogas plants. The company is looking for technical cooperation agreement or research cooperation to elaborate and design of waste management systems and pursuing research and development activities related to renewable source.


Biogas is one of the renewable energy sources of future. Electric and heat energy can be generated by the burning of biogas in gas engines. Biogas can be transformed to energy with 90% efficiency. By the implementation of integrated waste management system the volume of the disposal of wastes by land filling can be minimalized.


Concept stage

IPR Status

Other

Profile Origin

Other

Keywords

Technology

002004 Plant Design and Maintenance

002007027 Biobased materials

003001001 Cleaning Technology

003004006 Organic Substances

Market

006005015 Biomass and Biofuels

009003007 Other services (not elsewhere classified)

NACE

Ref: TRUK20140602001 of 16


E.36.0.0 Water collection, treatment and supply

E.37.0.0 Sewerage

E.38.2.1 Treatment and disposal of non-hazardous waste

E.39.0.0 Remediation activities and other waste management services

Dissemination


Agrofood

Restrict Dissemination to Specific Countries

Austria,Belgium,Bulgaria,Croatia,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France,Germany,Greece,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Poland,Portugal,Romania,Slovakia,Slovenia,Spain,Sweden,UnitedKingdom,

Client


Industry SME <= 10

Year Established

1996

Turnover

<1M


Yes

Languages Spoken

English

Client Country

Hungary

Partner Sought


Hungarian company is looking for cooperating designing companies abroad that it can work together with on the elaboration and design of waste management systems and technologies and pursuing R&D activities related to renewable sources of energy subject.

Ref: TRUK20140602001 of 16


The company is also interested in utilisation of renewable energy sources as a new activity, therefore it became involved in the renewable energy sources, more closely energy recovery from biomass. SME has been designed biogas and biomass production plants since years. The small enterprise wants to make a technical and/or research cooperation agreement for elaborating its technology of water and waste management.


SME 11-50,SME <10,>500 MNE,251-500,SME 51-250,>500


Technical cooperation agreement Research cooperation agreement

Low cost small wind energy solutions for residential …manufacturing of specialized components of...

Documents

Transcript of Low cost small wind energy solutions for residential …manufacturing of specialized components of...