632. rue Guimond

Longueuil (Québec) J4H 1P8

Tél. : (450) 928-3883

1-866-928-3883

Téléc. : (450) 928-1872No: GS.6296

Granit Gelcoat

GS-6296

Insaturated polyester

Product trade name:

Product code:

Chemical family:

LEL.UEL~ EXDosure limits Vapor pressure% bv weiQht Inaredients name

1.3kPa(at20°C) 1.1-7%100-42-5 TWA : 20STEL :40 (ppm)de ACGIG (TLV) (1994) PeauTWA: 50STEL: 100 (ppm)de NIOSH (1994) InhalationTWA: 50STEL: 100 eyes200 (ppm) de OS HA (PEL)(United States)(1989) Inhalation

Styrene10-25

3.9 kPa (at 20 cC) 2.1-12.5%80-62-6Methyl Methacrylate0-8 TWA: 10 (mg/m3) de ACGIH(TLV) (1996) InhalationTWA: 10 (mg/m3) de NIOSH(1994) InhalationTWA: 100 (ppm) de OSHA

(PEL) (United States) (1989)Inhalation

NIATWA: 6 (mg/m3) de NIOSH(1994) Inhalation

NIA7631-86-9Silicium dioxide amorphous0-2

Primary hazards andCritical effects: Warning

Contains material which causes damage to the following organs : lungs, nervoussystem, liver, respiratory tract, skin, central nervous system, eye lens or cornea.Flammable liquid and vapour; Vapour may cause flash tire. May be harmful ifinhaled. May cause eye and skin irritation. Contains material which may cause cancerbased on animal data. Then the risk of cancer depends on duration and level of exposure.Keep away from heat, sparks and flame. Avoid contact with eyes, skin and clothing. Avoidbreathing vapour or volatile particle. Keep container closed. Use only with adequateventilation.

Environmental hazards : Nat applicable.

Printed on 19-05-05Page 1/4GS-6296 anglais

4. FIRST AID MEASURES

Inhalation Remove you or the victim to fresh air. If breathing has stopped, give artificialrespiration. Obtain medical attention immediately.

Skin contact As quickly as possible, flush contaminated area with gently flowing water, non-abrasivesoap may be used to speed removal of the product. While under running water, remove ailcontaminated clothing, shoes and leather goods. Wash for at least 20 minutes, until ailmaterial has been removed from the skin. Obtain medical attention immediately. Destroyordecontaminate completely clothing.

Immediately flush affected eye with lukewarm, gently flowing water for at least 15 minutes,Holding eyelids open, until ail material has been removed from eye. Obtain medicalattention.

Eyes contact

Ingestion DO NaT INDUCE VOMITING. Have victim drink 1-2 glasses of water to dilute material instomach. Never give anything by mouth if victim is rapidly losing consciousness or isunconscious or convulsing. If vomiting occurs naturally, have victim jean forward to reducerisk of aspirating material into lungs. After vomiting, have victim drink more water. Beginartificial respiration immediately of victim is not breathing. Obtain medical attentionimmediately.

Extinguishing media: ln case of tire, use spray (fog), foam, dry chemical or CO2 Use foam or ail purpose drychemicals to extinguish and with the necessary equipment to do it.

Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA)and full turnout gear.

Fire-fithing procedures :

Fire-explosion hazards : Flammable liquid and vapour. Vapour may cause instantaneously tire. Vapours mayaccumulatein low or contined areas, travel considerable distance to source of ignition and flashback. Runoff to sewer may create tire or explosion hazard.

Hazardous decompositionproducts : Carbon oxider (CO, C02), 5ulphur oxider (802, 803)

6. ACCIDENT AL RELEASE MESURES---

Personal precautions Immediately contact emergency personnel. Eliminate ail ignition sources. Keepunnecessary personal away. Use suitable protective equipment (section 8). Followalltire tighting procedures (section 5). Do not touch or walk through spi lied material.

Environmental precautionsand clean-up methods : If emergency personnel are unavailable, contain spilled material. For small spills adds

absorbent (soil may be used in the absence of other suitable materials) and use anon-sparking or explosion proof means to transfer material to a sealed, appropriatecontainer for disposai to avoid tire risk. For large spills dike spi lied material or otherwisecontain material to ensure runoff does not reach a waterway. Place spilled material in anappropriate container for disposai. Minimize contact of spi lied material with soils toprevent runoff to surface waterways.

Printed on 19-05-05Page2/4GS-6296 anglais

7. HANDUNG AND STORAGE

Use the necessary equipment to avoid contact with skin, eyes and respiratory track;what does it means : goggles, glove, overall. Ask to your equipment supplier about theright equipment for handling the product (to avoid tire or explosion, dissipate staticelectricity during transfer by grounding and bonding containers and equipment beforetransferring material). Use explosion-proof electrical (ventilating, lighting and material

handling) equipment.

Handling

Store in a segregated and approved area. Keep container in a cool, well-ventilatedarea. Keep container tightly closed and sealed until ready for use. Avoid ail possiblesources of ignition (spark or flame).

Storage :

Packaging materials Use original container.

Persona! protective equipmentrespiratory system:

Respirator is not needed under normal and intended conditions of use, if exposures arekept below established limits. Respirator selection must be based on known or anticipatedexposure levels and the safe working limits of the selectedrespirator. If necessary be sure to use a MSHA / NIOSH approved respirator or equivalent.

Wear appropriate protective clothing to prevent skin contact.Skin and body

Use chemical resistant, impervious gloves. If necessary.Hands

Safety glasses are considered minimum protection.Eyes:

Liquid;

Beige

Styrene;

NIAWeighted average: 1.31 (water = 1);

Styrene is 29 mm of Hg (at 20 cC);

Styrene is 3.6 (air = 1);

The lowest known value is 127 cC (261 F) styrene;

May start to solidify at -30.9997 cC (-23.8 F) based on data for styrene;

0.5 (Styrene) compared to but yi acetate;

The only known value is 0.909 g/cm3 (styrene);

Partially soluble in cold water;

The lowest known value is 421 cC (789.8 F) (methyl methacrylate).

The lowest known value is in a close cup : 9.444 cC (49 F);Open cup : 10 cC (50 F) methyl methacrylate.

Appearance:

Color :

Odour :

pH:

Specific density :

Vapour pressure:

Vapour density :

Boiling point:

Melting point:

Evaporation rate:

Density :

Solubility :

Auto-ignition temperature :

Flash point:

Printed on 19-05-05Page 3/4GS-6296 anglais

Proper shipping name

Hazard class :

UNnumber:

Packing group :

Insatured polyester, flammable

3

1866

III (romains number)

The product is stable.Stability :

Conditions and materialsto avoid: Slightly reactive to reactive with oxidizing agents, acids. The product may under hazardous

decomposition condensation or polymerization. It may react violently with water to emittoxic gases or it may become self-reactive.

Hazardous decompositionproducts : The product of degradation are less than the product itself.

Hazardous polymerization : Yeso

For more informations, just cali the repsonsable of Sogel inc. at free number (866) 928-3883 (Canada)

Ali information in this document are based on knowledge and experiences actual. We are not taking any responsibility towards of the exactitude and completed data.The customers have to decide by himself if this product is appropriate to his use.

Printe<l on l~-Ub-UbPage4/4G~-til~b anglais