Long and flat steel products - Stahls GROUP · 4 LONG AND FLAT STEEL PRODUCTS LONG AND FLAT STEEL...
Transcript of Long and flat steel products - Stahls GROUP · 4 LONG AND FLAT STEEL PRODUCTS LONG AND FLAT STEEL...
Information about Mechel
Long products
Plates, sheets and strips
Sales
4
4
5
5
6
6
8
8
8
10
10
10
12
14
18
18
19
20
22
22
23
26
26
27
Chelyabinsk Metallurgical Plant
Izhstal
Beloretsk Metallurgical Plant
Hot-rolled steel equal leg angles
Special purpose sections
Hot-rolled flange beam
Welded beam
Railway rails
Rails for railway transport of companies
Wire rod
Round bars
Square bars
Hexagon bars
and its enterprises producinglong and flat steel products
Hot-rolled bars from stainlessand alloy steel
Sections
General purpose rolled bars
Reinforcing steel bars
Semi finished products
Hot-rolled plates, sheets and strips
Cold-rolled sheets and strips
Producers
Sales branch
1
2
3
4
WWW.MECHEL.COM LONG AND FLAT STEEL PRODUCTS 54 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM
1 Information about Mecheland its long and flat steel producers
IzhstalIzhevsk, Republic of Udmurtia, Russia
Izhstal is one of the leading Russian producers of specialty steels and stainless rolled steel. The plant produces hot-rolled long and shaped products, turned hot-rolled products, calibrated steel, cold-rolled strip, high-accuracy steel sections. The facility manufactures over 800 steel grades, including structural, stainless, tool, high-speed, and bearing steels as well as other grades of specialty steels and alloys. The rolling mills are capable of producing over 1,500 combinations of shapes and sizes.
Izhstal complies with the ISO 9001:2015 quality management standard.
Mechel’s long and flat steel producers 1
ounded in 2003, Mechel is one of Russia’s leading mining and steel producers. The company comprises producers of coal, iron ore concentrate, ferroalloys, steel, rolled steel, hardware, heat and electric power. Mechel’s production facilities are located in 11 of Russia’s regions and abroad. Mechel also runs three trading ports and owns a transport operator. Mechel markets its products both nationally and internationally.
The company’s steel facilities produce and supply steel billets, carbon and specialty steel long products, carbon and stainless steel flat products (including high added value products – closed-die and open-die forgings). The company can also produce various grades of steel to meet the specific demands of individual customers.
Please find below a summary of Mechel-owned long and flat steel producers:
Chelyabinsk Metallurgical PlantChelyabinsk, Chelyabinsk Region, Russia
Chelyabinsk Metallurgical Plant manufactures a wide range of steel products: pig iron, semi-finished steel billets for further re-rolling, long and flat rolled products made of carbon, struc-tural, tool steels, stainless steels and flat products from stainless steels and alloys.Chelyabinsk Metallurgical Plant (CMP) is primarily focused on production of rolled shaped steel ranging from 6.5-8.0 mm wire rod to 40 mm dia ribbed reinforcing steel; from rolled structural bars of 12-23 mm dia in coils to long products in diameter (80.0-190.0) mm, as well as square billet (98.0-350.0) mm for tube rolling mills and machine building works.
CMP is Mechel’s flagship flat steel producer manufacturing flat steel bars. The plant produces:• stainless steel plates and sheets: hot-rolled plates 3.5 to 100.0 mm thick, cold-rolled sheets 0.3 to 3.0 mm thick;• cold-rolled sheets 0.8 to 3.0 mm thick and hot-rolled steel sheetss 4.0 to 14.0 mm thick made of alloy (Grade HN78T (EI435);• hot-rolled steel sheets of unalloyed and structural steel grades 2.5 to 100 mm thick;• high-strength steel plates and bridge steel 6.0 to 20.0 mm thick (Type 325, 345, 390, Grade 09G2S, 10HSND, 16G2AF);• hot-rolled plates 6.0 to 20.0 mm thick (Grade 06HN28MDT (EI943) 8.0 to 25.0 mm thick made of alloy (Grade ChS129-ID);• cold-rolled sheets 1.0 to 3.0 mm made of alloy (Grade 06HN28MDT (EI943).
CMP’s rolling facilities are in the process of active upgrading. A new high-quality and stainless steel making facility was commissioned in 2010 in the electric arc furnace shop No.6, which expanded the range of flat products manufactured and (after the upgrade of rolling facilities is completed) will help start production of new stainless steel flat rolled products that are not yet manufactured in Russia. The sheet leveller of the rolling mill #4 commissioned in 2010 can produce steel plates that are well beyond the requirements of both national and international standards in terms of flatness. Such plates can be processed by laser cutters to minimum tolerances.
F
Beloretsk Metallurgical PlantBeloretsk, Republic of Bashkortostan, Russia
PAO "BMP" is the leader of hardware market in Russia. BMP produces wire rod and a wide range of wire products. Beloretsk Metallurgical Plant is one of Russia’ three leading wire prod-uct manufacturers. BMP rolled product range includes 5,5-9,0 mm wire rod and dia. 10-14 mm hoops from low-carbon, carbon, alloyed, tool, automatic, bearing, stainless and special steels.
Since 2003 Beloretsk Metallurgical Plant holds the ISO 9001:2015 international quality manage-ment certificate on to present.
We completed implementation of the large-scale project – reconstruction of the rolling mill #3 with the installation of the univer-sal rolling mill whose annual capacity is up to 1.1 million tonnes of steel products. The new mill is capable of producing high-quality rails up to 100 meters in length using state-of-the-art rolling quenching, correction, processing and quality control tech-nologies. This will ensure that the new rails will be superior to their foreign analogues on several key counts, due to the cli-matic and other specifics of rail exploitation in Russia, such as resistance to low temperatures, high wear and contact resistance. The mill will also produce various types of structural shapes (beams, channel beams, angles etc) needed for construction. CMP is one of the few Russian facilities entitled to mark steel grades with its own index – “ChS” (standing for “Chelyabinsk Steel”).
6 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 7LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
PRODUCT
Dimensions
Nominal size, mm
10; 10.5; 11; 11.5; 12; 12.5; 13;13.5; 14; 14.5; 15; 15.5; 16; 16.5;17; 17.5; 18; 18.5; 19; 19.5; 20;20.5; 21; 21.5; 22; 22.5; 23; 23.5;24; 24.5; 25; 26; 27; 28; 29; 30;31; 32; 33; 34; 35; 36; 37; 38; 40;41; 42; 43; 45; 46; 47; 48; 50; 52
60; 62; 63; 65; 70; 72; 75; 80; 85;90; 95; 100; 105
80; 85; 90; 95; 100; 105; 110; 115; 120; 130; 140; 150
150; 160; 170; 180
190
12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 41
Standards for steel product
Standards for chemical composition
Steel grade
Length, m
AISI 304; 316; 416; 420; 1.4301 and othersS5; S7; O1; A2; 1.2510 and othersM2; HS6–5–C2; 1.3343 and other
AISI 304; 316; 416; 420; 1.4301 and othersS5; S7; O1; A2; 1.2510 and othersM2; HS6–5–C2; 1.3343 and other
(up to 100 mm)
X20Cr13; X30Cr13; X46Cr13; X5CrNi18-10; X5CrNiMo17-12-2;
X6CrNiTi18-10; X2CrNi19-11 and others
AISI 304; 316; 416; 420; 1.4301
as per Producer’stechnical specification
based on ASTM, DIN EN, BS
DIN EN 10088–3
as per Producer’stechnical specification
based on ASTM, DIN EN, BS
3.0 mt (high-speed steel
grades – 1 mt)
2.8 mt(high-speed steel grades – 0.5 mt)
by agreementbetween the purchaser
and the supplierat the time of ordering
3.0 mt
IZHSTAL
CHELYABINSKMETALLURGICAL
PLANT
IZHSTAL
3.0–6.0
5.5–6.3
4.0–6.0
3.2–7.4
3.0–6.0
as per Producer’s technical specification
based on ASTM, DIN EN, BS
as per Producer’s technical specification
based on ASTM, DIN EN
as per Producer’s technical specification
based on ASTM, DIN EN, BS
Hot-rolled round steel bars
Hot-rolled hexagon steel bars
ProducerMinimum
delivery lot
2LONG PRODUCTSLONG PRODUCTS
Hot-rolled bars from stainless and alloy steel2HOT-ROLLED BARS FROM STAINLESS AND ALLOY STEEL
Hot-rolled bars from stainless and alloy steel
8 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 9LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
2LONG PRODUCTS
Sections Sections2LONG PRODUCTS
FIGURE
DIMENSIONS
Nominal size, mm
4,0 (40х40х3; 4)5,0 (50х50х4; 5)
Standards for steel product
Standards for chemical composition
Steel grade
Length, m
4,0–9,0 GOST 535–2005(GOST 8509–93)
St0; St1kp; St2ps; St3ps;St3sp; St5ps
GOST 380–2005CHELYABINSK
METALLURGICALPLANT
Producer
HOT-ROLLED STEEL EQUAL LEG ANGLES
SVP 22
Z310
18U, 20U,22U, 24U
6,0–24,0
6,0-24,0
6,0-24,0
GOST 535–2005 (GOST 18662–83)
GOST 5267.0–90(GOST 5267.3–90)
GOST 8240–97
St5ps1; St5ps2; St5sp1
345–09Mn2Si (345–09Г2С);375–09Mn2Si (375–09Г2С);
375–12Mn2VCu (375–12Г2ФД)390–12Mn2VCu (390–12Г2ФД)
C255; C345; St3; 265-09Mn2Si (265-09Г2C);345-09Mn2Si (345-09Г2C)
GOST 535–2005
GOST 19281–2014
GOST 27772–2015, GOST 535–2005, GOST 19281–2014
CHELYABINSKMETALLURGICAL
PLANT
by agreement between the purchaser
and the supplier at the time of ordering
Minimum delivery lot
by agreement between the purchaser
and the supplier at the time of ordering
SPECIAL PURPOSE SECTIONS
SVP (special inter-changeable section)hot-rolled mining frame section
Z-sectionfor centre girder
Hot rolled channels(U-section)
PRODUCT
Hot-rolled steel equal leg angles
FIGUREPRODUCT
DIMENSIONS
Type
18B1; 18B2; 20B1; 20Sh1; 20K1; 20K2; 25B1; 25B2; 25K1; 25K2; 25K3; 25Sh1; 30Sh1; 30Sh2; 30B1; 30B2; 30K1; 30K2; 30K4; 35B1; 35B2; 35Sh1; 35Sh2; 40B1; 40B2; 40Sh1; 40Sh2; 45B1; 45B2; 50B1;
50B2; 50B3; 55B1; 55B2; 60B1; 60B2
IPE 160; IPE 180; IPE 200;IPE 220; IPE 240; IPE 300
IPB 160 (HE 160 B); IPB 180 (HE 180 B); IPB 200 (HE 200 B); IPB220 (HE 220 B); IPB 240 (HE 240 B); IPB 300 (HE 300 B)
IPBl 160 (HE 160 A); IPBl 180 (HE 180 A); IPBl 200 (HE 200 A); IPBl 220 (HE 220 A); IPBl 240 (HE 240 A); IPBl 300 (HE 300 A)
Standards for chemical composition
Steel grade
Length, m
6,0–24,0
6,0–24,0
6,0-24,0
6,0–24,0
GOST 57837–2017
DIN 1025-5
DIN 1025-2
DIN 1025-3
St3sp5;345-09Mn2Si (345-09Г2С);
C255; C345
S235JR+AR; S355J2+AR
S235JR+AR; S355J2+AR
S235JR+AR; S355J2+AR
GOST 535–2005;GOST 19281–2014;GOST 27772–2015
DIN EN 10025-2
DIN EN 10025-2
DIN EN 10025-2
HOT ROLLED FLANGE BEAM
Hot rolled flange beam
Standards for steel product
Minimumdelivery lot Producer
CHELYABINSKMETALLURGICAL
PLANT
by agreementbetween the purchaser
and the supplierat the time of ordering
Size
10 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 11LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
2LONG PRODUCTS
Sections2 Sections
LONG PRODUCTS
PRODUCT
PRODUCT
FIGURE
FIGURE
Type
Type
Standards for steel product
Standards for steel product
Standards for chemical composition
Standards for chemical composition
Steel grade
Steel grade
Minimumdelivery lot
Minimumdelivery lot
Producer
Producer
RAILWAY RAILS
RAILS FOR RAILWAY TRANSPORT OF COMPANIES
R65R50
60E160E2
RP 50RP65R65
TS 0921–231–01124323–2014GOST 51685–2013
EN 13674–1
GOST R 51045–2014TS 14–2R–475–2013
K76F
R260R350HT
K76FK76AFK90AF
Wide gauge railway rails
Vignolerailway rails
Rails for railway transport of companies
TS 0921–231–01124323–2014GOST 51685–2013
EN 13674–1
GOST R 51045–2014TS 14–2R–475–2013
CHELYABINSKMETALLURGICAL
PLANT
CHELYABINSKMETALLURGICAL
PLANT
by agreementbetween the purchaser
and the supplierat the time of ordering
by agreementbetween the purchaser
and the supplierat the time of ordering
PRODUCT
DIMENSIONS, MM / TYPE
Thickness index
Webthickness
Corrugation wave height
Webheight
Corrugation wave length
Flangewidth
Flangethickness
Nominal size : 25B1; 25B2; 30B1; 30B2; 35B1; 35B2; 40B1; 40B2; 45B1; 45B2; 50B1; 50B2; 50B3; 55B1; 55B2; 60B1; 60B2; 70B1; 70B2; 70BC; 80B1; 80B2; 90B1; 90B2; 100B1; 100B2; 100B3; 100B4; 40Sh1; 40Sh2; 45Sh1; 50Sh1; 50Sh2; 50Sh3; 50Sh4; 60Sh1; 60Sh2; 60Sh3; 60Sh4; 70Sh1; 70Sh2; 70Sh3; 70Sh4; 70Sh5; 80Sh1; 80Sh2; 90Sh1; 90Sh2; 100Sh1; 100Sh2; 100Sh3; 100Sh4; 40K1; 40K2; 40K3; 40K4; 40K5
Standards for chemical composition
Steel grade
А
В
С
2
2,5
3
40
41,5
43
333;500;625;750;
1000;1250
155 160-400 6-30 TS 14–134–493–2017
TS 14–134–492–2017
C255 (flange)OK360B5-St3ap (web)
Carbon and structural steel
GOST 27772–2015GOST 16523–1997
GOST 14637–1989GOST 19281–2014GOST 27772–2015
WELDED BEAM
Corrugated Web beam (sin-beam)
WeldedI and Hsection
Standards for steel product
Minimumdelivery lot Producer
CHELYABINSKMETALLURGICAL
PLANT
by agreementbetween the purchaser
and the supplierat the time of ordering
12 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 13LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
LONG PRODUCTSLONG PRODUCTS
2 General purpose rolled bars General purpose rolled bars
PRODUCT
Dimensions
Nominal size, mm
Standards for steel product
Standards for chemical composition
Steel grade
Coil mass, kg
Minimumdelivery lot Producer
WIRE ROD
6.5; 7.0; 8.0; 9.0
5.5–12.0
5.5; 6.5; 7.0; 8.0; 9.0;10.0; 11.0; 13.0
5.5; 6.5; 8.0; 10.0
5.5; 6.5; 7.0; 8.0; 10.0;11.0; 12.0
5.5; 6.5; 8.0; 10.0
5.5; 6.5; 8.0; 10.0; 12.0
5.5
5.5–12.0
5.5; 6.5; 8.0; 9.0; 10.0;11.0; 12.0
5.5; 6.0; 6.5; 7.0; 8.0;9.0; 10.0; 11.0; 12.0
5.5; 6.5; 8.0; 9.0; 10.0
up to 850
up to 2300
as per Producer’s specification
as per Customer’s specification
SAE 1006; SAE 1008;SAE 1012; SAE 1015
SAE 1006; SAE 1008; SAE 1010; SAE 1010А; SAE 1011SAE 1012; SAE 1015;
SAE 1018; SAE 1018 mod.
SWRH 62B; SWRH 72B;SWRH 82B
AISI 304
SAE 1045; SAE 1055;SAE 1060; SAE 1065; SAE 1070;
SAE 1075; SAE 1080
SWPН 42A
SWPН 27–SWRH 82A; SWRH6R–SWRH17R
С4D
R ST37–2; R ST36–2
G3Si1 S1. SG2. SWRY11
С46D2; С56D2; С68D2;С72D2; С82D2
С3D1(D6); C15D2(D15)
Hot-rolled wire rod
Hot-rolled steel product
ASTM A29/A29M
ASTM A/A29MASTM A 510M
JIS G 3506
ASTM A 479
ASTM A29ASTM A510
JIS G 3506
JIS G 3506
DIN EN 10016–2
DIN 17100
DIN EN ISO 14341
DIN EN 10016–4
DIN EN 10016–4
65 mt
by agreement between the purchaser
and the supplier at the time of ordering
CHELYABINSKMETALLURGICAL
PLANT
BELORETSKMETALLURGICAL
PLANT
2
14 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 15LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
LONG PRODUCTSLONG PRODUCTS
2 General purpose rolled bars General purpose rolled bars
PRODUCT
Dimensions
Nominal size, mm
Standards for steel product
Standards for chemical composition
Steel gradeLength, m /Coil mass, mt
Minimumdelivery lot Producer
ROUND BARS
10; 10.5; 11, 11.5; 12; 12.5; 13; 13.5; 14; 14.5; 15; 15.5; 16; 16.5; 17; 17.5; 18; 18.5; 19; 19.5; 20; 20.5; 21; 21.5; 22; 22.5; 23; 23.5; 24; 24.5; 25; 26; 27; 28; 29; 30; 31; 32; 33; 34; 35; 36; 37; 38; 40; 41; 42; 43; 45; 46; 47; 48; 50; 52
12; 13; 14; 15; 16; 18; 19; 20; 21; 22
6,5; 8; 10; 12; 13; 14; 15; 16; 18; 19; 20; 21; 22; 23; 24; 25
12; 13; 14; 15; 16; 18; 19; 20; 21; 22; 23; 24; 25
heat-treated:3.0–6.0
without heattreatment:3.0–11.7
coil mass up to 450 kg
3.0–6.06,0–11,6
as per Producer’s technical specification
based on ASTM, DIN EN, BS
GOST 535–2005
GOST 1050–2013
GOST 4543–2016
GOST 14959–2016
GOST 535–2005
GOST 1050–2013
GOST 19281–2014
1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13; 070M20; 070M55; 080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5 (16MnCr5S5); 18CrMo4;
18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 42CrMo4 (42CrMo4S4);
65Si7 and others
St1sp; St1ps; St2sp; St2ps; St3sp; St3ps; St3Gsp; St3Gps; St5sp (category 1-5)
10; 15; 20; 25; 30; 35; 40; 45; 50; 55; 60; 15Mn (15Г); 20Mn (20Г); 25Mn (25Г); 30Mn (30Г); 35Mn (35Г); 40Mn (40Г); 45Mn (45Г); 50Mn (50Г);
10Mn2 (10Г2); 30Mn2 (30Г2); 35Mn2 (35Г2); 40Mn2 (40Г2); 45Mn2 (45Г2); 50Mn2 (50Г2)
15Cr (15Х); 15CrMo (15ХМ); 30Cr (30Х); 40Cr (40Х); 45Cr (45Х)
55Si(A) (55С2А); 50CrMnV(A) (50ХГФА); 60Si(A) (60С2А); 60Si2Mn (60С2Г);
65Mn (65Г) and others
St1sp; St1ps; St2sp; St2ps; St3sp; St3ps;St3Gsp; St3Gps; St5sp (category 1-5)
10; 15; 20; 25; 30; 35; 40; 45; 50; 55; 60; 15Mn (15Г); 20Mn (20Г); 25Mn (25Г); 30Mn (30Г); 35Mn (35Г); 40Mn (40Г); 45Mn (45Г); 50Mn (50Г);
10Mn2 (10Г2); 30Mn2 (30Г2); 35Mn2 (35Г2); 40Mn2 (40Г2); 45Mn2 (45Г2); 50Mn2 (50Г2)
265–09G2S; 295–09G2S
Hot-rolled round bars
Hot-rolled round bars in coil
Hot-rolled round bars
5 mt
65 mt
5 mt
IZHSTAL
CHELYABINSKMETALLURGICAL
PLANT
CHELYABINSKMETALLURGICAL
PLANT
DIN EN 10083–2DIN EN 10083–3DIN EN 10084ASTM A29/A29MBS 970
GOST 380–2005
GOST 1050–2013
GOST 4543–2016
GOST 14959–2016
GOST 380–2005
GOST 1050–2013
GOST 19281–2014
2
16 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 17LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
LONG PRODUCTSLONG PRODUCTS
2 General purpose rolled bars General purpose rolled bars
PRODUCT
Dimensions
Nominal size, mm
Standards for steel product
Standards for chemical composition
Steel gradeLength, m /Coil mass, mt
Minimumdelivery lot Producer
ROUND BARS
45; 46; 48; 50; 52; 53; 54;55; 56; 58; 60; 62; 63; 65;70; 72; 75; 80; 85; 90; 95; 100; 105
110; 115; 120; 125 – steel grade as per additional agreement
80; 85; 90; 95; 100; 105; 110; 115; 120; 125; 130; 140; 150; 160; 170; 180; 190
200
3.0–6.0
4.0–6.54.0–7.5
3.0–11.6
as per Producer’s technical specification
based on ASTM, DIN EN, BS
as per Producer’s
technical specification based on ASTM, DIN EN, BS
GOST 1435–99
GOST 1050–2013
1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13; 070M20; 070M55; 080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5 (16MnCr5S5); 18CrMo4;
18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 42CrMo4 (42CrMo4S4);
65Si7 and others
C22E; C22R; C35E; C35R; С40Е; C40R; С45Е; C45R; С50Е; C50R; C55E; C55R; C60E; С60R; 28Mn6
41Cr4; 41CrS4; 25CrMo4; 25CrMoS4; 34CrMo4; 34CrMoS4; 42CrMo4; 42CrMoS4 and others
C10E; C10R; C15E; C15R; C16E; C16R; 16MnCr5; 16MnCrS5; 16MnCrB5; 20MnCr5; 20MnCrS5; 18CrMo4;
18CrMoS4; 18NiCr5-4; 18CrNiMo7-6 and others
11SMn30; 11SMn37; 35S20; 46S20
(AISI/SAE) 1018; 1020; 1035; 1045;1050; 4130; 4140; 8620 and others
S235JR; S235JO; S235J2; S275JR; S275J0; S275J2; S355JR; S355J0; S355J2
S355N; S355NL
080A15; 070М20; 070М55; 080M30; 080М40; 708М40; 080A42; 080M15; 150M19; 230M07 and others
16NiCrMo12; 18NiCrMo5
39NiCrMo3; 40NiCrMo7
LF2
A105
100Cr6; 100CrMnSi6-4
U7(A); U8(A); U9(A); U10(A); U11(A); U12(A); U13(A)
20; 30; 35; 40; 45
Hot-rolled round bars
2.8 mt
by agreement between
the purchaser and the supplier
at the time of ordering
IZHSTAL
CHELYABINSKMETALLURGICAL
PLANT
DIN EN 10083–2DIN EN 10083–3DIN EN 10084ASTM A29/A29MBS 970
DIN EN 10083–2
DIN EN 10083–3
DIN EN 10084
DIN EN 10087
ASTM A29/А29М
DIN EN 10025–2
DIN EN 10025–3
BS 970
UNI 7846
UNI 7845
ASTM A350
ASTM A105
DIN EN ISO 683–17
GOST 1435–99
GOST 1050–2013
2
18 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 19LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
LONG PRODUCTSLONG PRODUCTS
2 General purpose rolled bars
PRODUCT
Dimensions
Nominal size, mm
Standards for steel product
Standards for chemical composition
Steel gradeLength, m
Minimumdelivery lot Producer
SQUARE BARS
heat-treated:3.0–6.0
without heattreatment:3.0–11.7
3.0–6.0
as per Producer’s technical specification
based on ASTM, DIN EN, BS
1117; 4130; 4140; 4340; 5160; 8620; 9260;С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13; 070M20; 070M55; 080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5 (16MnCr5S5); 18CrMo4;
18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 42CrMo4 (42CrMo4S4);
65Si7 and others
Hot-rolled square steel bars
5 mt
2.8 mt
IZHSTAL
DIN EN 10083–2DIN EN 10083–3DIN EN 10084ASTM A29/A29MBS 970
12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 25; 26; 27; 28; 30; 32; 34; 35; 36; 38; 40
45; 50; 55; 60; 65; 70; 75; 80; 85; 90
heat-treated:3.0–6.0
without heattreatment:3.0–11.7
as per Producer’s technical specification
based on ASTM, DIN EN, BS
1117; 4130; 4140; 4340; 5160; 8620; 9260; С10–60; 150М19; 150М36; 210М15; 220М07; 605М36; 527А60; 530А40; 635М15; 655А22; 655М13; 780М40; 805Н20; 817М40; 826М40; 835М30; 832М13; 070M20; 070M55; 080A40; 080A42; 080A47; 080M15; 080M30; 080M50; 080M40; 16MnCr5 (16MnCr5S5); 18CrMo4;
18CrNiMo7–6; 18MnCr5; 20MoCr5; 25CrMoS4; 3ICrMoY9; 41CrS4; 42CrMo4 (42CrMo4S4);
65Si7 and others
Hot-rolled hexagon steel bars
5 mt IZHSTAL
DIN EN 10083–2DIN EN 10083–3DIN EN 10084ASTM A29/A29MBS 970
12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 41
2
HEXAGON BARS
PRODUCT
Dimensions
Nominal size,mm
Standards for steel product
Standards for chemical composition
Steel gradeLength, m
Minimumdelivery lot Producer
REINFORCING STEEL BARS
in coil (coil mass up to 850 kg)
in rod 6,0–12,0
GOST 5781–82
Classification
plain and ribbed
Class A-I (plain): St3sp(ps)Class A-II (ribbed): St5sp
Class A-III (ribbed): 35GS; 25G2S
Hot-rolled steel bars for concrete reinforcement
GOST 5781–82 65 mtCHELYABINSK
METALLURGICALPLANT
6,5; 8; 10№ 6; 8; 10; 12
№ 6; 8; 10; 12; 14;16; 18; 20; 22; 25;28; 32; 36; 40
Reinforcing steel bars
20 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 21LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
LONG PRODUCTSLONG PRODUCTS
2 Semi finished products
PRODUCT
PRODUCT
Dimensions
Dimensions
Nominal size,mm
Nominal size, mm
Standards for steel product
Standards for steel product
Standards for chemical composition
Standards for chemical composition
Steel grade
Steel grade
Length, m
Length, m
Minimumdelivery lot
Minimumdelivery lot
Producer
Producer
REINFORCING STEEL BARS
SEMI FINISHED PRODUCTS
in bars (in rod) 6,0–12,0
in bars6,0–12,0
GOST 10884–94 GOST 52544–2006
DIN 488–1;DIN 488–2
BS 4449
ONORM B 4707
Classification
plain and ribbed
ribbed
A500C (№12; 14)At400C; At500C
B500B
B550B
Thermomechanically hardened steel bars for reinforced con-crete constructions
GOST 10884–94GOST 52544–2006
DIN 488–1;DIN 488–2
BS 4449
ONORM B 4707
65 mtCHELYABINSK
METALLURGICALPLANT
Continuously cast square billet intended for further re-rolling into light-section bars
Continuously castbillet (bloom) intended for further re-rolling into rolled product
Continuously castrectangular billet (slab) intendedfor further re-rolling into flat product
Hot-rolled square billet
Hot-rolled square billet(bloom)
100
180
200
300x360
170x1030–1550;250x1030–1550
98; 100; 105; 110; 130
156
200 250–350
9.0–12.0
6.0–12.0
3.5–12.0
3.7–12.0
4.0–6.0
max 4.5
5.0–6.23.0–4.2
up to 4.2
as per Producer’s technical specification
as per Producer’s technical specification
as per Producer’s technical specification
as per Producer’s technical specification
as per Producer’s technical specification
St3sp; St3ps; St4sp; St4ps; St5sp; St5ps; C3D1; AH36; S235JR; S275JR; S355J2;
SAE 1006–1018; SAE 1065–1070; SWRY11; В500В; 10; 15; 20; 25; 30; 35; 40; 45; 50; 55; 60;
15Mn (15Г); 20Mn (20Г); 25Mn (25Г); 30Mn (30Г); 35Mn (35Г); 40Mn (40Г); 45Mn (45Г); 50Mn (50Г);
10Mn2 (10Г2); 30Mn2 (30Г2); 35Mn2 (35Г2); 40Mn2 (40Г2); 45Mn2 (45Г2); 50Mn2 (50Г2)
St3sp; St3ps; St4sp; St4ps; St5sp; St5ps; S235JR; S275JR; S355J2; C45E; C45R and others
C15E; C15R; 16MnCr(S)5; 20MnCr(S)5 and others
S235JR (1.0038); S275JR (1.0044); S355JR (1.0045); S355J2 (1.0577)
SAE 1006; SAE 1008; SAE 1016; SAE 1022S30400 (type304); S32100 (type321)
A 36; St3sp; St3ps
S235JR; S235J0; S235J2; S275JR; S275J0; S275J2; S355JR; S355J0; S355J2
S235JR; S235J0; S235J2; S275JR; S275J0;S275J2; S355JR; S355J0; S355J2
S30400 (type 304); S32100 (type 321)
GOST 380-2005 GOST 1050-2013 ASTM A29/А29М DIN EN 10025-2 DIN 488 and others
GOST 380–2005 DIN EN 10025–2 DIN EN 10083–2 DIN EN 10084
DIN EN 10025–2 ASTM A29/A29M ASTM A 240/A 240M ASTM A6/A6M GOST 380–2005
DIN EN 10025–2
DIN EN 10025–2
ASTM A 240/A 240M
200 mt
200 mt
200 mt
65 mt
65 mt
CHELYABINSKMETALLURGICAL
PLANT
2
№ 10; 12; 14; 16; 18; 20; 22
10–20
Reinforcing steel bars
22 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 23LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
PRODUCT
Dimensions, mm
thickness width
Steel grade Standards for chemical composition
Producer: Chelyabinsk Metallurgical PlantProducer: Chelyabinsk Metallurgical Plant
length
by agreement between the purchaserand the supplier at the time of ordering
1D
heat treated and pickled
1D
heat treated and pickled
by agreement between the purchaserand the supplier at the time of ordering
by agreement between the purchaser and the supplier at the time of ordering
by agreement between the purchaser and the supplier at the time of ordering
DIN EN 10025–2
DIN EN 10083–2
DIN EN 10083–3
DIN EN 10088–2
ASTM A240/A240M
DIN EN 10088–2
ASTM A240/A240M
DIN EN 10025–2
GOST 8568–77
TS 0970–001–77304466–2011
S235JR; S235J0; S235J2;S275JR; S275J0; S275J2;S355JR; S355J0; S355J2
C35E; C45E and others
41Cr4; 51CrV4 and others
X5CrNi18–10; X6CrNiTi18–10 and others
S30400 (type 304); S32100 (type 321) and others
X5CrNi18–10; X6CrNiTi18–10 and others
S30400 (type 304); S32100 (type 321) and others
S235JR; S235J0; S235J2; S275JR; S275J0; S275J2; S355JR; S355J0; S355J2
St3sp/ps and others
10; 20; St3sp and others
Platesand sheets
Strips
Rhombic checkered steel plates
Expanded metal plates
Delivery condition
HOT-ROLLED PLATES, SHEETS AND STRIPS
PRODUCT
Dimensions, mm
thickness width
0.5–4.0;1.5–4.0
0.5–4.0;1.5–4.0
1000–1250;1500
200–1250;1500
Steel grade Surface qualityStandards
length
2000–40002000–6000
–
X5CrNi18–10; X6CrNiTi18–10 and others
S30400 (type 304); S32100 (type 321) and others
X5CrNi18–10; X2CrNi18–9;X6CrNiTi18–10 and others
S30400 (type 304); S32100 (type 321) and others
DIN EN 10088–2:2005
ASTM A 240/A 240M
DIN EN 10088–2:2005
ASTM A 240/A 240M
2B
2B
Cold-rolled sheets
Cold rolled strips
COLD-ROLLED SHEETS AND STRIPS
3PLATES, SHEETS AND STRIPSPLATES, SHEETS AND STRIPS
Hot-rolled plates, sheets and strips Cold-rolled sheets and strips31000
1250
1000–2000
1000–1500
1000–1500
1000–1800
244–1250
1500
1000–1250
500–1250
2.5–6.0
3.0–6.0
7.0–50.0
6.0–20.0
4.0–6.0
6.0–50.0
2.5–6.0
7–10
4–6
Plate №: 310; 406; 408; 410; 506; 508; 510
2000–6000
3500–8000
4000–6500
2000–6000
4000–6500
–
2000-6000
1000-6000
COMPANY
Tel.: +7 (351) 722 85 83 +7 (351) 725 30 34
Tel./Fax:+7 (34792) 4 10 33+7 (34792) 3 10 77
Tel.: +7 (3412) 91 01 60Fax: +7 (3412) 91 09 75
Address Tel / Fax E-mail
32, 2-ya Paveletskaya ul.,Chelyabinsk, Chelyabinsk Region,
454047, Russian Federation
1, Blyukhera ul., Beloretsk,Bashkortostan Republic,
453500, Russian Federation
6, Novoazhimova ul.,Izhevsk, Udmurt Republic,
426006, Russian Federation
CHELYABINSKMETALLURGICAL PLANT
BELORETSKMETALLURGICAL PLANT
IZHSTAL
PRODUCERS
COMPANY Address Tel / Fax E-mail
SALES BRANCH
4 Sales Sales 4
26 LONG AND FLAT STEEL PRODUCTS WWW.MECHEL.COM 27LONG AND FLAT STEEL PRODUCTSWWW.MECHEL.COM
ne of Mechel’s important competitive advantages lies in its sales policy, based on its effort to creating long-term partnership ties with the company’s clients and meeting their needs in steel products and services as fully as pos-sible. We can fulfill any order regardless of size and complexity. Our clients can order various steel products made from an assortment of special steels.
For our clients’ convenience and to increase the efficiency of our sales, we created the international sales network Mechel Service Global B.V., which focuses on marketing our steel products domestically as well as in Europe and the CIS member states. In addition to sales of steel products, the company offers a wide range of services within at its storage facilities.
The company’s headquarters are located in the Hague (the Netherlands). They function as a coordination center for steel product sales and ensure efficient interaction between our clients and Mechel Group’s steel producers.
The extensive sales network, with its highly proficient staff, storage infrastructure, sweeping product range and sufficient stores, allows us to fulfill our clients’ needs fully and promptly.
ОMECHEL SERVICE GLOBAL B.V. Head Office
Mechel-Service (RUSSIA)www.mechelservice.ru
Mechel Service AUSTRIA
Mechel Service Bel (BELARUS)
Mechel Service BELGIUM
HBL Holding (GERMANY)
Mechel Service KAZAKHSTANwww.mechelservice.kz
Mechel Service Stahlhandel CZECH REPUBLIC s.r.o.
Parkstraat, 202514 JK, The Hague,
The Netherlands
35, Mishina street127083, Moscow, Russia
Lunzenstrasse 105, 4021 Linz, Austria
7, Ignatenko street 220035, Minsk, Republic of Belarus
Generaal Lemanstraat, 272018, Antwerp, Belgium
Auf den Kampen 2059071 Hamm-Uentrop, Deutschland
Abay pr. (Radostovca ul.), 151/115, Alatau Business Centre, off. 309
050009, Almaty, Rep. of Kazakhstan
Prumislova 461, 53003, Pardubice, Czech Republic
Tel.: +31 70 844 00 00 Fax: +31 70 844 00 01
Tel. / Fax:+7 (495) 739 98 80
Call-centre: +7 800 700 95 50
(calls in Russia are free)
Tel.: +43 732 6925 0 Fax: +43 732 6924 1000
Tel.: +375 17 226 66 38 +375 17 203 92 12
Tel.: +32 3 259 02 00 Fax: +32 3 259 02 09
Tel.: +49 02381 30033-0 Fax: +49 02381 30033-31
Tel. / Fax:+7 (727) 391 16 50/51/52
Tel.: +420 46 6047 111 Fax: +420 46 6047 170
office@ ms-stahlhandel.at
mechelservice.ru
[email protected]@hbl.de
..