LOGO BUS SYSTEM Members: Bui Thi Diep Nguyen Thi Ngoc Mai Vu Thi Thuy Class: 1c06.

LOGO

BUS SYSTEM

Members: Bui Thi DiepNguyen Thi Ngoc MaiVu Thi Thuy

Class: 1c06

COMPANY LOGO

www.themegallery.com

OVERVIEW

1

Introduction of bus lines2

Introduction of typical buses3

Conclusion4

Setting the problem

COMPANY LOGO


Setting the problems

How to connect components in the processor such as hard disks, memory, sound system, video system and so on?

How many parts are there in the modern bus system?

What should we know the bus?

How many kinds of bus?

What are some typical buses?

COMPANY LOGO


Buses in a computer system

COMPANY LOGO


Bus system

System

Bus

BUS SYSTEM

I/O Bus

COMPANY LOGO


System bus

FrontsideBus

SYSTEMBUS

Backside Bus

COMPANY LOGO


I/O Bus

I/O Bus

PCI Bus (1993)

ISA Bus (1981)

AT Bus (1987)USB Bus (2000)

PCI Express Bus (2004)

AGP Bus (1996)

COMPANY LOGO


Understanding bus

Concept of bus system

Purpose of using bus

Characteristics of bus

Advantages of bus

Disadvantages of bus

COMPANY LOGO


Concept of bus

A bus in the computing is the set of physical connection(cable, printed circuits, ...) which can be share by multiple hardware components in order to communicate with one another.

COMPANY LOGO


Concept of bus

COMPANY LOGO


Purpose of using bus

The purpose of using bus is to reduce the

number of “pathways” needed for

communication between the components, by

carry out all communication over a single

data channel.

COMPANY LOGO


Characteristics of Bus

The amount of information that can be transmitted at once.

This amount, expressed in bit, corresponds to the number of physical lines over which data is sent simultaneously.

The bus speed is also defined by its frequency (expressed in Hertz), the number of data packets sent or received per second.

COMPANY LOGO


Bus disadvantages

The major disadvantage of a bus is that it creates a communications bottleneck.

A bus limits the maximum I/O throughput.

For high performance systems, designing a bus system capable of meeting the demands of the processor is a major challenge.

COMPANY LOGO


Bus Advantages

Two major advantages of a bus organization are:

Low cost: a single set of wires is shared between multiple cores

Versatility: new cores can be added easily and cores can be reused in a different design if the bus interface is the same

COMPANY LOGO


Bus Classification

3 ways to classify kinds of bus: Base on signal function:

• Address bus• Data bus• Control bus

Base on speed:• VXL bus• Processor bus• I/O bus

Base on operation rules• Synchronous bus• Asynchronous bus

COMPANY LOGO


Mention Content

Address busData busControl bus

COMPANY LOGO


ADDRESS BUS

Computer bus (a series of lines connecting two or more devices) used to specify a physical address

Consists of all the signals necessary to define any of the possible memory address locations within the computer, or for modular memories any of the possible memory address locations within a module

Defined as a label, symbol, or other set of characters used to designate a location or register where information is stored

COMPANY LOGO


ADDRESS BUS (cont)

An address must be transmitted to memory over the address bus before data or instructions can be written into or read from memory by the CPU or I/O sections

The width of the address bus determines the amount of memory a system can address

Example:

a system with a 32-bit address address 232 (4,294,967,296) memory locations.

COMPANY LOGO


ADDRESS BUS (cont)

Table 12: 80x86 Family Address Bus Sizes

COMPANY LOGO


DATA BUS

Function: the bidirectional data bus, sometimes called the memory bus, handles the transfer of all data and instructions between functional areas of the computer

Only transmit in one direction at a time

COMPANY LOGO


DATA BUS

Transfer instructions from memory to the CPU for

execution. It carries data (operands) to and from the CPU

and memory as required by instruction translation

COMPANY LOGO


CONTROL BUS

Used by the CPU to direct and monitor the actions of the other functional areas of the computer

Used to transmit a variety of individual signals (read, write, interrupt, acknowledge …) necessary to control and co-ordinate the operations of the computer

COMPANY LOGO


Typical buses – ISA Bus

Some focused information: ISA = Industry Standard Architecture ISA was a computer bus standards for IBM

compatible computers.

COMPANY LOGO



Some focused information: The ISA bus was developed by a team lead

by Mark Dean at IBM as part of the IBM PC project in 1981.

ISA bus is the oldest, slowest and soon to become obsolete I/O bus system.

COMPANY LOGO



Some focused information: Is used with sound cards, disk drives or most

network and video cards.

8-bit ISA (XT) card 16-bit ISA card

COMPANY LOGO



History: In 1981, it appeared on the first PC the 8-bit

ISA bus ran at a modest 4.77 – the same speed as the processor.

In 1982, it was extended for the XT (X-Tended Technology) system architecture.

In 1984, the newer 16-bit standard, the IBM AT bus, was introduced.

COMPANY LOGO



History: In1988, ISA was improved to 32-bit EISA

(Extended Industry Standard Architecture) standard and renamed the AT bus.

In 1990s, most ISA cards remained as 8-bit technology.

Now, in late 2008, the extinction of vestigial ISA from chipsets may be on the horizon

COMPANY LOGO



Bus width 8 – bit

Compatible with

8 bit ISA

Pins 62

Power +5 V, -5 V, +12 V, -12V

Clock 4.7727266 MHz

Bus width 16 – bit

Compatible with

16 bit ISA

Pins 98

Power +5 V, -5 V, +12 V, -12V

Clock 8.333333 MHz

8-bit ISA Bus 16-bit ISA Bus

COMPANY LOGO


Typical buses – PCI Express Bus

Some focused information: PCI Express = Peripheral Component

Interconnect Express = PCI-E

PCI-E bus is an interconnect bus that allows you to add expansion boards to a computer.

PCI Express bus was developed in July 2002

It is the development of PCI -> it’s compatible with PCI architecture

COMPANY LOGO



COMPANY LOGO



Advantages of PCI Express High bandwidth, can reach up to 5-80 gigabits

per second.

The serial technology offers a scalable performance.

Point-to-point link for each device.

Small connectors facilitate the implementation for system designers.

COMPANY LOGO



PCI Express slots

COMPANY LOGO



PCI Express slots (x4,x16,x1,x16) and PCI slot

COMPANY LOGO


Typical buses – USB Bus

Some focused information: USB = Universal Serial Bus

It based on serial type architecture

It is an input-output interface

It quicker than standard serial ports

COMPANY LOGO



USB standards: The USB 1.0 standard developed from 1995 The USB 1.1 standards provide several

clarification but doesn’t change speed.

The USB 2.0 standard obtains speeds reach 480Mbit/s

The USB 3.0 standard released in 2007, the speed is 4.8 GB/s.

COMPANY LOGO



Type of connectors: 2 Type A: the shape is rectangular and used for

less bandwidth intensive devices (keyboard, mouse, webcam, etc.)

Type B: the shape is square and used for high speed devices (external hard disks, etc.)

COMPANY LOGO



USB hub example

COMPANY LOGO


Conclusion

Bus is very importance in computer architecture

It’s used largely and in most of everything which is related to physical computers

Use Bus to connect components in a processor.

There are 2 main parts in the bus system: system bus and I/O bus.

COMPANY LOGO


Conclusion

We introduced some basic information about bus consists of concept, purposes of using, characteristics, advantages and disadvantages.

In the range of our research, we only mention some kinds of buses. They are address bus, data bus and control bus.

Some typical buses: ISA bus, PCI bus and USB bus.

LOGO BUS SYSTEM Members: Bui Thi Diep Nguyen Thi Ngoc Mai Vu Thi Thuy Class: 1c06.

Documents

Transcript of LOGO BUS SYSTEM Members: Bui Thi Diep Nguyen Thi Ngoc Mai Vu Thi Thuy Class: 1c06.