LOCATIONS - Industrial Valve · Anderson Greenwood, Consolidated, Crosby, Farris, Kunkle, and...
Transcript of LOCATIONS - Industrial Valve · Anderson Greenwood, Consolidated, Crosby, Farris, Kunkle, and...
REMANUFACTURED
PRODUCTS
ask
abou
t ou
r sp
ecia
l ser
vice
s
Valve & Actuator Purchase: Industrial Valve purchases excess store room/salvage yard stock. Please contact Kenya Dennis.
New Surplus: New surplus valves are valves that have never been in service, in factory new condition. All valves meet/exceed factory criteria prior to shipment.
All valves are tested beyond new valve API 598 requirements. This includes control, gate, safety valves, and actuators. Once the reconditioning is completed, every piece is tested again in a separate quality control protocol. This quality control series actually exceeds the testing done on new valves and actuators. Test results are available at no additional charge.
Industrial Valve is proud to offer Fisher, Leslie, Masonelian, and Valtek Control Valves and parts. Rotork, Limitorque, Diamond, and Triac Actuators. Anderson Greenwood, Consolidated, Crosby, Farris, Kunkle, and Lonergan Safety Valve and safety valve parts. Allis Chalmers, Chapman, Crane, Dezurik, Durco, Edwards, Jamesbury, Kitz, Neles, Pacific, Powell, Rockwell, and Yarway among many other Manual Valve and manual valve parts.
• IN
VEST
MEN
T RE
COVE
RY•
REPA
IR B
Y EX
CHAN
GE
• KE
NYA
DENN
IS -
MAN
UAL
VALV
ES•
BRYA
N W
RIGH
T - M
ANUA
L VA
LVES
• CH
UCK
DIXO
N - M
ANUA
L VA
LVES
• TO
MM
Y GO
DWIN
- SA
FETY
VAL
VES
• TO
MM
Y JA
CKSO
N - A
CTUA
TORS
• TE
RRY
HUGG
INS
- CON
TROL
VAL
VES
ww
w.I
ND
VALV
E.c
om
Indu
stri
al V
alve
Sal
es &
Ser
vice
, Inc
.P
O B
ox 1
468
Mob
ile A
L 36
633
SURP
LUS
DIVI
SION
CON
TACT
S
SOUTHERN OPERATIONSMOBILE, AL130,000 SQ FT PLANT32 ACRE SITE251.675.5282800.523.2159
WEST SOUTH CENTRAL OPERATIONSBASTROP, LA30,000 SQ FT PLANT6 ACRE SITE318.283.1000800.256.7999
SOUTH ATLANTIC OPERATIONSCLEVELAND, TN38,000 SQ FT PLANT6.5 ACRE SITE423.472.6110800.982.5837
EASTERN CENTRAL OPERATIONSEVANSVILLE, IN24,000 SQ FT PLANT3 ACRE SITE812.473.3901855.789.3935
LOCATIONS
• IRON• STEEL• COMMON AND EXOTIC ALLOY
• ANGLE• BALL• BUTTERFLY• CONTROL• GATE• GLOBE• KNIFE• PISTON
• PLUG• RELIEF• SAFETY• SWING CHECKS• TILT DISC CHECKS• WAFER CHECKS• UNIT TANDEM• REVERSE FLOW CURRENT CHECKS
What do we mean when we say “better-than-new?” Just like a newly manufactured valve, our valves carry a one year warranty. However, unlike brand new valves, our “better-than-new” valves have been thoroughly tested and are available at a substantially reduced price and they are available now - not a week’s or even a month’s wait for a newly manufactured valve.
With our inventory and stock of hard-to-find valves, you can often avoid having to make costly alterations in your plant to accommodate a brand new valve.
SIzES1/4” - 108”
PRESSURE CLASSES25# - 4500#
1. Pre-inspection to determine the general condition of the valve
2. Match marking of major components for proper orientation of parts
3. Disassemble, blast, clean all parts to bare metal
4. Inspect all parts for damage or wear
5. Inspect valve stem for thread wear and pitting of stem packing area
6. Inspect valve stem nut (yoke bushing) for thread wear
7. Inspect valve disc (wedge) for cuts / wear
8. Inspect valve seats (seat rings) for cuts / wear
9. Inspect valve bonnet for pits / cuts of packing area
10. Inspect valve bonnet for cuts / wear of body bonnet gasket landing
11. Inspect valve body for cuts / wear of body bonnet gasket landing
12. Inspect body flange faces for cuts / wear
13. Inspect handwheel for pits / breakage
14. Inspect handwheel nut thread wear
15. Inspect stem nut handwheel area for thread wear
16. Inspect stem nut retainer for wear / thread wear
17. Inspect packing gland
18. Inspect packing gland flange
19. Inspect body flanges for hole wear
20. Inspect body bonnet flanges for hole wear
21. Inspect valve name plate
For more than a quarter century, Industrial Valve has delivered. Industries across the country continue
rewarding relationships with IVS because we are constantly striving to make customer operations for efficient. It’s not only about supplying the highest quality safety and relief, manual, control valves, and actuator services. It’s about understanding your business and the challenges faced daily. This is what allows Industrial Valve to develop solutions and programs that save time and money. This commitment to quality and innovation means you can count on Industrial Valve, not only as your supplier, but as your partner.
REPAIR-BY-EXCHANGE (RBE)No more short outage headaches while meeting equipment maintenance requirements. The Repair-By-Exchange process supplies a valve for the application needing service at a prorated value of a replacement. Industrial valve will pull the current valve out and install an exchange valve in its place, saving you countless hours of downtime usually associated with required maintenance. Our Repair-By-Exchange program has never failed to meet a time frame set by a customer.
A PROgRAM DESIgNED wITh
YOUR BUSINESS IN MIND
materials
types of valves
Consolidated Safety Valves
Limitorque Electric Actuators
Control Valves
Manual Valves
1533VX, 1538VX, 1538VC, 1700, 2700 (sizes 1” to 24”)
SMB-0 through SMB-5
Fisher, Masonelian, Dezurik, Valtek
Sizes ¼” to 108”
RARE VALVES IN INVENTORY