Loads of LamingtonsLoads of Lamingtons - NZ Maths€¦ · The lamingtons are to be packed in...

1
A net is a 2-D pattern for making a 3-D object out of card or other thin material. Loads of Lamingtons L o a d s o f L a m i n g t o n s Drawing nets and constructing containers 12 activity You need: square dot paper, card, scissors, felt-tip pens or coloured pencils Your mum is on the local kindergarten committee. Its members are getting ready for their annual fundraising event, a lamington drive. The lamingtons are to be packed in presentation boxes, each holding 12. Each lamington measures 8 centimetres by 4 centimetres and is 5 centimetres high. Your mum has agreed to design the boxes, but she is very busy, so she asks you to do this for her. Design at least 3 boxes so that she will have a choice. 1. Draw the nets for your containers, showing the necessary measurements. 2. Which container do you think is most suitable? Give reasons for your decision. 3. Make the container.

Transcript of Loads of LamingtonsLoads of Lamingtons - NZ Maths€¦ · The lamingtons are to be packed in...

Page 1: Loads of LamingtonsLoads of Lamingtons - NZ Maths€¦ · The lamingtons are to be packed in presentation boxes, each holding 12. Each lamington measures 8 centimetres by 4 centimetres

A net is a 2-D pattern for making a 3-Dobject out of card or other thin material.

Loads of LamingtonsLoads of LamingtonsD

raw

ing

nets

and

cons

truc

ting

cont

aine

rs

12

activity

You need: square dot paper, card, scissors, felt-tip pens or coloured pencils

Your mum is on the local kindergarten committee.

Its members are getting ready for their annual

fundraising event, a lamington drive.

The lamingtons are to be packed in presentation

boxes, each holding 12. Each lamington

measures 8 centimetres by 4 centimetres

and is 5 centimetres high.

Your mum has agreed to design the boxes, but

she is very busy, so she asks you to do this for

her. Design at least 3 boxes so that she

will have a choice.

1. Draw the nets for your containers,

showing the necessary measurements.

2. Which container do you think is most

suitable? Give reasons for your decision.

3. Make the container.