loading equipment for the Washer-Disinfectors
Transcript of loading equipment for the Washer-Disinfectors
Always with you
LOADING EQUIPMENTfOr ThE WAshEr-DIsINfEcTOrs GETINGE 4656 AND 46-sErIEs
Do you want a complete AN cart? An adjustable OP cart? Or perhaps a LAB cart with a
separate cassette system for different kinds of laboratory glassware?
The Washer-Disinfectors Getinge 4656 and 46-series have loading equipment for all types of
goods and capacity needs. Some are designed for specific special tasks. Others are unusually
flexible, so they can be used for more than one task.
This catalogue shows you the available loading equipment for the Washer-Disinfectors
Getinge 4656 and 46-series. For more detailed information, please feel free to phone your local
Getinge representative.
Loading Equipment with this symbol is either no longer in stock or has been
replaced with a new generation of loading equipment. For more information, please
refer to brochure ”Loading Equipment with Unlimited Flexibility for Getinge 46-series
Washer-disinfectors”. The old MIS equipment will remain in the range to supplement
existing wash-carts.
LOADING EQUIPMENT fOr ALL TyPEs Of GOODs
TrANsPOrT TrOLLEys AND sTOrAGE TAbLEs
OP- AND cONTAINEr-WAsh cArTs
MIs-WAsh cArTs
DENTAL-WAsh cArTs
AN-WAsh cArTs
LAb-WAsh cArTs
sTANDs fOr MIscELLANEOUs ITEMs
TrAys, bAskETs AND OThEr AccEssOrIEs fOr WAsh cArTs
1
2
3
4
5
6
7
1
8
2
3
4
5
6
7
8
GETINGE 46-4Getinge 46-4, mostly used in surgical departments and smaller central sterile
supply departments, washes items on four levels.
When a loading equipment is available for Getinge 46-4, this sign will appear
in the photo:
hOW TO UsE ThIs cATALOG
GETINGE 46-5Getinge 46-5, mostly used for larger surgical instrument sets and in central
sterile supply departments, washes items on five levels.
When loading equipment is available for Getinge 46-5, this sign will appear in
the photo:
GETINGE 46-2, 46-3 & 4656Getinge 46-2, 46-3 and 4656 are no longer in production, but most of the
loading equipment for the 46-series is available also for these discontinued
washer-disinfectors.
Fits: 46-4
Fits: 46-5
1
2
3
4
5
6
7
8
1Our loading and unloading equipment provides excellent ergonomics and high transport safety. Take, for example, the safety mechanism on the transport trolleys which prevent your goods from rolling away and lets you connect the carts to the Washer-Disinfector. The transport equipment is designed with hygiene in mind, with easy-to-wipe surfaces and good drip off.
TrANsPOrT TrOLLEys AND sTOrAGE TAbLEs
1
2
3
4
5
6
7
8
9
8
1. TrANsPOrT TrOLLEys AND sTOrAGE TAbLEs
Transport trolleyThe transport trolley is used for docking and locking the carts to the machine
or the loading/unloading point. By releasing the handle, the wash-cart is eas-
ily transfered into the chamber of the washer-disinfector. The handle can be
placed on the right hand side or the left hand side. In dryer environments, for
example on the clean side, a transport trolley without drain may be sufficient.
The 4 swivel wheels make the transport trolley easy to maneuver.
Maximum loading weight: 75 kgs.
Transport trolley with drain and bottleThe transport trolley is used for docking and locking the carts to the machine
or the loading/unloading point. By releasing the handle, the wash-cart is eas-
ily transfered into the chamber of the washer-disinfector. The handle can be
placed on the right hand side or the left hand side. When working in environ-
ments with very wet goods, a drain-and-bottle solution is recommended.
The 4 swivel wheels make the transport trolley easy to maneuver.
Maximum loading weight: 75 kgs.
storage tableThe storage table can be used for wash carts being loaded/unloaded or
for storing them when not in use. The storage table is made of high-quality,
stainless steel, with surfaces that are easy to keep clean.
Loading height: 800 mm. Maximum Loading weight: 75 kgs.
Art. No. 499314400
WASHER-DISINFECTOR Right handle Left handle MODEL
Getinge 46-series/4656 499218800 499218801
WASHER-DISINFECTOR Right handle Left handle MODEL
Getinge 46-series/4656 499218802 499218803
2
3
4
5
6
7
8
2Getinge’s OP-wash carts have a modular design with interchangeable parts, making it easy to adapt the carts for many different types of instruments and other goods.The carts are easy to expand with modules for tubular instruments, bowls, shoes and anesthesia accessories, to name a few. This makes them very useful tools for your department.
OP- AND cONTAINEr-WAsh cArTs
2
3
4
5
6
7
8
9
10
2. OP- AND cONTAINEr-WAsh cArTs
OP-WAsh cArTsThese OP-wash carts are available in different levels in order to offer maximum flexibility and
adaptability. All carts have removable spray arms and the wash levels can easily be removed as
well. There is a huge variety of additional accessories available to rebuild and equip the OP-
wash carts. Each level can hold up to 10 kg.
OP-wash cart, 2 levelsCapacity: 4 SPRI II (340x250x70 mm) or
4 DIN (480x250x50/70 mm)
WASHER-DISINFECTOR Art. No. MODEL
46-2, 46-3, 46-4 502688000Fits: 46-2, 46-3, 46-4
2. OP- AND cONTAINEr-WAsh cArTs
11
2
3
4
5
6
7
8
OP-wash cart, 3 levelsCapacity: 6 SPRI II (340x250x70 mm) or
6 DIN (480x250x50/70 mm)
OP-wash cart, 4 levelsCapacity: 8 SPRI II (340x250x70 mm) or
8 DIN (480x250x50/70 mm)
OP-wash cart, 5 levelsCapacity: 10 SPRI II (340x250x70 mm) or
10 DIN (480x250x50/70 mm)
WASHER-DISINFECTOR Art. No. MODEL
46-3, 46-4, 46-5 499305100
WASHER-DISINFECTOR Art. No. MODEL
46-3, 46-4, 46-5 499215800
46-4 for guide rail 501278500
46-5 502870700*
WASHER-DISINFECTOR Art. No. MODEL
46-5 501518100Fits: 46-5
Fits: 46-3, 46-4, 46-5
Fits: 46-3, 46-4, 46-5
*With larger distance between levels
12
2. OP- AND cONTAINEr-WAsh cArTs
* Included in 46-2
WASHER-DISINFECTOR Without support With support MODEL
46-2, 46-3, 46-4, 46-5 499207600 499207601*
Lower basic cartThis lower basic cart is included in 46-2. It can
also be fitted in 46-3, 46-4 and 46-5 and is
then mainly used for larger accessories like stand for
bowls (see chapter 8).
Capacity: 2 SPRI II (340x250x70 mm) or
2 DIN (480x250x50/70 mm).
Free loading height:
310 mm (46-2)
515 mm (46-4)
585 mm (46-5)
Free loading height to upper basic cart:
350 mm (46-4, 46-5)
Upper basic cart, single door modelThe upper basic cart is extendable which makes it easy
to load. Thus it requires mounting on a guide rail and an
additional spray arm. This is included in the 46-2 but has
to be ordered separately for the other models.
Capacity: 2 SPRI II (340x250x70 mm) or
2 DIN (480x250x50/70 mm).
Free loading height:
180 mm (46-2, 46-4)
250 mm (46-5)
WASHER-DISINFECTOR Art. No. MODEL
Upper basic cart, single door model 499183100
Extra guide rail and spray arm for 46-3 and 46-4 501685901
Extra guide rail and spray arm for 46-5 501685904
Fits: 46-2, 46-3, 46-4, 46-5
Fits: 46-2, 46-3, 46-4, 46-5
2. OP- AND cONTAINEr-WAsh cArTs
13
2
3
4
5
6
7
8
WASHER-DISINFECTOR Art. No. MODEL
Upper basic cart, double door model 499399300
Extra guide rail and spray arm for 46-3 and 46-4 501685901
Extra guide rail and spray arm for 46-5 501685904
WASHER-DISINFECTOR Art. No. MODEL
46-2, 46-3, 46-4, 46-5 499227800
Upper basic cart, pass-through modelThe upper basic cart is extendable which makes it easy
to load. Thus it requires mounting on a guide rail and an
additional spray arm. This is included in the 46-2 but has
to be ordered separately for the other models.
Capacity: 2 SPRI II (340x250x70 mm) or
2 DIN (480x250x50/70 mm).
combination cartThe combination cart features a pipe injector
cart and can load both traditional goods and
tubular instruments. The injector (diameter 4 mm) have
clips and fit 8 smaller hoses. 2 hose jets, 3 injectors (Ø 4
mm), 1 bent injector pipe och 6 flexible silicone hoses.
Fits: 46-2, 46-3, 46-4, 46-5
Fits: 46-2, 46-3, 46-4, 46-5
14
2. OP- AND cONTAINEr-WAsh cArTs
cart for DIN-containersThe container cart is designed to assure efficient clea-
ning and disinfection. Furthermore, the inclined positio-
ning of the goods ensures maximum run-off and short
drying times.
Capacity: 3 pcs of 1/2 STE (600x300x150 mm) including
lids.
Art. No. 499274000
cONTAINEr cArTsGetinge’s container cart is designed for optimum cleaning and drying of containers and lids.
The sloping containers guarantee the best possible water drip-off.
Fits: 46-3, 46-4, 46-5
3
4
5
6
7
8
3Whether your capacity needs are great or small, Getinge has a MIS-cart for you. Our carts for tubular instruments can be equipped in many ways, and specially adapted with small accessories like hose reels, hose drums, instrument baskets and so on.
MIs-WAsh cArTs
3
4
5
6
7
8
9
16
3. MIs-WAsh cArTs
MIs-wash cartThe complete MIS-wash cart offers a high ca-
pacity and built-in flexibility. The wash cart has
2 wash levels with an additional ramp system on top.
The ramp system consists of one straight central ramp
with 8 injector bodies with Ø 15 mm, 8 injector bodies
with Ø 20 mm and 4 injector bodies with Ø 29 mm. An
additional 4 open injector bodies (Ø 4 mm) and 4 closed
injector bodies (Ø 4 mm) are mounted as well.
On the sides of this ramp, you have 20 silicon jets fitted
with flexible silicone hoses, six of which are fitted with
6-8 mm male luer jets and another six with nipples. The
two angled side ramps with discharge holders are fitted
with 16 injector bodies (Ø 11,5 mm) with silicone covers.
In total 80 connections for lumen.
Art. No. 499913200
One loading example. Another angle of the MIS-cart.
Instrument on injection pipe with luer connection.Connections for longer instruments.
Fits: 46-3, 46-4, 46-5
Fits: 46-4, 46-5
3. MIs-WAsh cArTs
17
3
4
5
6
7
8
Universal wash rack, L-shapedThis L-shaped rack is mounted in the back of the lower basic
cart.
This L-shaped ramp consist of 2 holders for canulas, 4 injection pipes
(Ø 4 mm), 6 hoses with nipples. An additional 5 screwed outputs are
plugged and can be removed for use when necessary. Additional connec-
tions with injectors and silicone hoses are available, see page 22.
Universal wash rack, L-shaped for tubular instrumentsThis L-shaped rack is mounted in the front-side of the lower basic
cart. The wash rack is equipped with an instrument ramp for 10 tubular in-
struments on the front-side. Besides this, an additional 4 injectors, 6 flexible
silicone hoses (3 with male luer connections) and a stand for 4 canulas.
Universal wash rack, L-shaped for tubular instrumentsThis L-shaped rack is mounted in the OP-wash carts. One spray
arm is removed and this rack mounted instead. The wash rack is equipped
with an instrument ramp for 10 tubular instruments on the front side. Besides
this, an additional 4 injectors, 6 flexible silicone hoses (3 with male luer con-
nections) and a stand for 4 canulas.
Art. No.
For OP-cart, 2-levels (502688000) 500012000
For OP-cart, 4-levels (499215800) 500907900
*To be mounted in lower basic cart 499207600 on page 12.
Art. No. 501085500*
*To be mounted in lower basic cart 499207600 on page 12.
Art. No. 499375300*
Fits: 46-3, 46-4, 46-5
Fits: 46-2, 46-3, 46-4, 46-5
Fits: 46-2, 46-4, 46-5
18
3. MIs-WAsh cArTs
Universal wash rack, U-shaped for tubular instrumentsThis U-shaped rack is mounted in the lower basic cart.The wash
rack is equipped with an instrument ramp for 10 tubular instruments on
the back-side. Besides this, an additional 4 injectors (Ø 4 mm), 6 flexible
silicone hoses (3 with male luer connections) and a stand for 4 cannulas.
An additional 12 screwed outputs are plugged and can be removed for use
when necessary. Additional connections with injectors and silicon hoses are
available, see page 22.
*To be mounted in lower basic cart (499207600) on page12.
Universal wash rack, U-shaped for tubular instrumentsThis front U-shaped rack is mounted in the OP-wash carts. The
shelves are removed and this rack mounted instead.The wash rack is equip-
ped with an instrument ramp for 10 tubular instruments on the front-side.
Besides this, an additional 4 injectors (Ø 4 mm), 6 flexible silicone hoses (3
with male luer connections) and a stand for 4 cannulas. An additional 10
screwed outputs are plugged and can be removed for use when necessary.
Additional connections with injectors and silicon hoses are available, see
page 22.
Art. No. 499366600*
*To be mounted in OP-cart, 4-lev. (499215800) on page 11.
Art. No. 499391200*
Pipe injector headThe pipe injector is a sub-accessory of the universal wash rack (L or
U) and is placed on the upper connection of the rack. The injectors
(Ø 4 mm) have clips and fit 8 smaller hoses.
Art. No. 499208400
Fits: 46-3, 46-4, 46-5
Fits: 46-3, 46-4, 46-5
3. MIs-WAsh cArTs
19
3
4
5
6
7
8
clamp injector headThe clamp injector head is a sub-accessory of
the universal wash rack (L or U) and is placed
on the upper connection of the rack. The device is
equipped with 8 threaded pipe bodies (bore 11.5 mm)
with caps and a discharge holder.
Art.No. 499304200*
WASHER-DISINFECTOR For mounting in OP-cart 2, 3 and 4-levels MODEL
Getinge 46-3, 46-4, 46-5 500135300
MIs instrument rampThe MIS instrument ramp is a sub-accessory
for the OP-wash cart. The ramp is connected
to the wash cart by removing one spray arm and wash
level. The ramp has 22 wide injector bodies (eight 20
mm bore + eight 15 mm bore and six injectors with
caps, 11.5 mm bore) and another 8 injectors (Ø 4 mm).
Additionally, the MIS instrument ramp has 30 threaded
connections with flexible silicone jets, which can be fit-
ted with silicone hoses.
* Also fits the AN-wash cart (499208100), see page 27
20
3. MIs-WAsh cArTs
L-rack in a OP 4-cart.
Close-up on the L-rack.
MIS-ramp in a OP cart.
Combination of U-rack, injector clamp head and VMD411B.
Loading examples
Close-up on the injector holders.
3. MIs-WAsh cArTs
21
3
4
5
6
7
8
MIS instrument ramp with fine filter. The tri-clamp connector makes it easy to remove the fine filter.
OP-cart 4 levels, mounted with instrument ramp luer lock and fine filter.
WASHER-DISINFECTOR MODELS For mounting in OP-cart Capacity GETINGE 46-3, 46-4 & 46-5 2, 3 and 4 levels
MIS instrument ramp with luer lock and fine filter 502212201 20 male, 2 female
MIs instrument ramp with luer lock and fine filterThis ramp is mounted on the OP-cart. It is spe-
cially designed for smaller instruments for example eye
surgery. The sides of the ramp is equipped with 28 sili-
con jets. Above 20 male luer jets and 2 female luer jets
are fitted. An additional 6 screwed outputs are plugged
and can be removed for use when necessary. The fine
filter is mounted with a tri-clamp connection.
Loading examples
22
3. MIs-WAsh cArTs
Ref: Description Art. No
1 500723800
2 500830600
3 500723901
4 500723900
5 498836500
6 501399501
7 499892600
8 499328101
9 500434600
10 Silicone hose with nipple Ø 6 mm 500764200
11 Silicone hose with nipple Ø 4 mm 500764400
12 Funnel 499225100
13 Funnel for urological instruments 500723600
Narrow pipe injectors bodies Ø 11.5 mmCaps for narrow pipe injector bodiesWide pipe injector bodies Ø 20 mm
Narrow pipe injector bodies Ø 15 mm
Flexible silicone jets
Luer lock male Ø 8 mm
Injectors closed
Injectors open
Fine filters
10
1
42
3
12 13
8 7
11
5
6
9
3
4
5
6
7
8
4Getinge has accessories to cover all types of goods in dental clinics such as trays, handpieces and instruments.
The Getinge dental accessories provides excellent cleaning results and are approved by leading manufacturers of handpieces.
A unique filter is easy to handle and standard with our equipment.
DENTAL-WAsh cArTs
4
5
6
7
8
9
24
4. DENTAL-WAsh cArTs
Dental wash cart, 4 levelsThis 4-level, dental wash cart has removable spray arms
and the wash levels can easily be removed in order
to accomodate the correct accessories for the dental
practice.
This basic dental wash cart has been equipped with
the accessories below. Each level can hold up to 10 kgs.
Art. No. Capacity alt. 1 Capacity alt. 2
Basic dental wash cart, 4 levels 500921200* 1 injection pipe V-shaped, 1 tray rack, 4 instrument trays SPRIII*
2 injection pipe V-shaped, 2 tray racks
* Injection pipe, tray racks and trays are not included. See below.
Injection pipe V-shapedThe V-shaped injection
pipe assures safe cleaning
and disinfection of up to 18
hand-pieces. It is mounted
on the dental wash cart or
lower basic cart.
Double injection pipe V-shapedThe V-shaped injection
pipe assures safe cleaning
and disinfection of up
to 36 hand-pieces. It is
mounted on an OP-cart.
Tray rackThe tray rack holds up to
9 dental trays.
Art. No. 501115400
Instrument holderThe instrument holder
can hold up to 16 dental
instruments.
Art. No. 400000401
Art. No.
500911500*
502450200
Dental wash cartOP-cart, 4 levels
Art. No.
502481100OP-cart, 4 levels
*For dental wash cart (500921200) For OP-cart 4-levels (499215800)
Fits: 46-3, 46-4, 46-5
5Getinge has a wide range of anesthesia carts. Carts for integrated drying or for separate drying in a drying cabinet – all fitted with a variable number of injectors for bags, bellows, suction bottles and smaller hoses.
Getinge AN-wash carts provide excellent cleaning results by filling the hoses from below. The drying process in the spiral cart is also optimal because the spiral placement of the hoses provides excellent drip-off.
Our unique AN-cart for separate drying in a drying cabinet is used with Getinge’s cassette system. It boosts the Washer-Disinfector’s capacity compared with integrated drying!
AN-WAsh cArTs
4
5
6
7
8
26
5. AN-WAsh cArTs
AN-spiral wash cart for integrated dryingAN spiral wash carts offer a high-capacity solution with its 12 hose
connections for hoses of an inner connection Ø of 8-30 mm and a
maximal length 1500 mm. An additional 15 injectors (L=102 mm),
15 injectors (L= 30 mm), 6 injectors for breathing bags and 2 injec-
tors for bellows are mounted. There is also an insert on the central
pipe for mounting a tray for masks (see article 500740900 on page
29 , to be ordered separately).
Note, when using this AN-wash cart in 46-3 the recommendation is
to dry the hoses in a separate drying cabinet.
WASHER-DISINFECTOR Art. No. Capacity MODEL
Getinge 46-3, 46-4 499700700 4-6 AN sets, max 12 anaesthetic hoses
Getinge 46-5 501975600 4-6 AN sets, max 12 anaesthetic hoses
*Instrument trays are not included.
AN-wash cart for integrated dryingThis AN-wash cart offers 12 clamp connections for hoses with an
inner diameter of 8-30 mm and a maximum length of 1500 mm.
Furthermore, the cart is equipped with 1 injector for bellow and 4
injectors for breathing bags. An additional 14 screwed outputs are
plugged and can be removed for use when necessary. There is also
an insert on the central pipe for mounting a holder for 8 smaller ho-
ses (art. no. 499208400 page 18, to be ordered separately).
Note, when using this AN-wash cart in 46-3 the recommendation is
to dry the hoses in a separate drying cabinet.
Art. No. Capacity
AN-wash cart for integrated drying 499590500 4-6 AN sets, max 12 anaesthetic hoses
Fits: 46-3, 46-4, 46-5
Fits: 46-3, 46-4, 46-5
5. AN-WAsh cArTs
27
5
6
7
8
Getinge 363 drying cabinetsThe drying cabinet is an excellent complement to a washer-disinfec-
tor when you need to add more capacity. As standard, the cabinet
is delivered with 9 shelves for instrument trays. Additionally, you can
order cassettes to dry AN hoses and bellows. Maximum capacity is
6 cassettes (see available cassettes on the following page).
(For more information, please order the Getinge 363 drying cabinet
brochure.)
Art. No. Capacity
AN-wash cart for hose cassettes 499208100 4-6 AN sets, max 12 anaesthetic hoses
AN-wash cart for hose cassettesThis AN-wash cart is equipped with 1 injector for bellow and 4 injec-
tors for breathing bags. An additional 14 screwed outputs are plugged
and can be removed for use when necessary. There is also an insert
on the central pipe for mounting a holder for 8 smaller hoses (Art. No.
499208400 page 18, to be ordered separately). The cart also offers
the possibility to add 2 cassettes for hoses with a maximum length of
1500 mm and a total capacity of maximum 12 hoses. The removable
cassette system is optimal when you wish to dry the hoses separately
in a drying cabinet (see below). For cassettes, please see page 28.
(The cassettes are not included in the cart).Fits: 46-3, 46-4, 46-5
28
5. AN-WAsh cArTs
AN-cassette for 6 cOAX/VIAX-hoses with straight connection.
AN-cassette for 6 hoses with 6–25 mm bore.
AN-cassette for 6 small catheters with 3–10 mm bore.
AN-cassette for 6 hoses with 25 mm bore.
Art.No. 498825200 Art.No. 477245500
Art.No. 498797800 Art.No. 498666600 Art.No. 477271100
AN-cassette for 6 hoses for IsO-hoses with 22 mm bore.
AN-cassette for 6 hoses with 6-25 mm bore. 6 loose injectors are included (498798000).
Art.No. 498797801
cassette for 4 bellowsFor drying only. Fits Getinge 363 drying cabinet.
Art.No. 477062200
5. AN-WAsh cArTs
29
5
6
7
8
separate injector for 6 mm boreAlso for application of smaller hoses on the cassettes,
this separate injector is mounted directly onto the cas-
sette.
(Fits 477271100 and 498797800).
holder for small hosesThe holder for small hoses is a sub-accessory
to the OP-wash cart and is mounted on the
cart by removing one spray arm. The injectors (diameter
4 mm) have clips and fit 8 smaller hoses.
holder for 8 masksThe tray is suitable for 8 AN masks and can be fitted in
any type of wash cart.
Measurements: 340x250x52 mm.
Art.No. 500740900
Art.No. 498798000
Injection barThe injection bar is a sub-accessory to the OP-wash, 4
levels 499215800 and is mounted on the cart by remov-
ing one spray arm. The bar holds a cassette holder on
one side (please select cassette on page 28 - order
separately) and on the other side 9 injectors (diameter 4
mm) with clamp holders, intended for cleaning, disinfec-
tion and drying of smaller hoses.
Art.No. 499219100
Art.No. 499219200
30
5. AN-WAsh cArTs
Loading examples.
Mounted holder for small hoses loaded with catheters. Holder for masks mounted in AN-wash cart.
Mounted injection bar for smaller hoses and cassette holder. Loading example with AN-hoses and traditional goods.
6Getinge’s lab wash carts are designed with a unique concept for easy loading. The same cart can be fitted with different cassettes for different types of laboratory glassware. Using the cassette system for everything from small injection glasses to giant vials and pipettes, you can tailor the lab cart precisely to your department’s needs.
LAb-WAsh cArTs
6
7
8
32
6. LAb-WAsh cArTs
Lower Injection cart for 1 laboratory cassetteThis injection cart for Washer-Disinfector 46-4 and 46-5, is a basic cart for
adding a suitable cassette depending on type of laboratory goods.
The injection cart is suitable for both single door and pass-through models.
Upper Injection cart for 1 laboratory cassetteThis injection cart for single door models of Washer-Disinfector 46-4 and
46-5, is a basic cart for adding a suitable cassette depending on type of
laboratory goods. The cart is extendable for easier loading and is mounted on
guide rails and needs additional spray arms.
bottle cassette DUrAN bottles 100-1000 mlThe glass cassette can be placed in any of the injection carts above. It is
fitted with 28 holes with a capacity of up to 28 DURAN bottles depending on
size.
Glass cassette for mixed laboratory glassThe glass cassette can be placed in any of the injection carts above. It is
fitted with 28 rilsan coated injectors. 14 of them consist of three holders
with a length of 170 mm and one injection pipe with a length of 160 mm
(501348300). The other 14 injectors have one holder with a length of 105
mm and the injection pipe is 100 mm (501348000).
For a close-up photo, see page 36. Other injectors can also be fitted (see
page 36-39).
Art. No. 499257400
Art. No. 499258400
Art. No. 499269000
Art. No. 499269100
Guide rails and spray arms for 46-4 501685901
Guide rails and spray arms for 46-5 501685904
6. LAb-WAsh cArTs
33
6
7
8
Lower injection cart for large flasksThis injection cart holds up to 4 pcs of large flasks. Re-
quired free loading height is 515 mm. Minimum diameter
is 148 mm. The injection cart is suitable for both single
door and pass-through models.
Art.No. 499254801
Lower injection cart for large DUrAN bottlesThis injection cart holds up to 4 pcs of 5 liter Duran bott-
les. Required free loading height is 515 mm. Maximum
diameter is 190 mm. The injection cart is suitable for
both single door and pass-through models.
Art.No. 499254800
Lower injection cart for mixed goodsThis injection cart is fitted with 28 rilsan coated injectors
(502206300). The injectors have three holders with a
height of 175 mm and the injector length is 160 mm. Re-
quired free loading height is 515 mm with the upper level
removed or 305 mm with the upper level mounted.
Art.No. 499237100
34
6. LAb-WAsh cArTs
Upper injection cart for flasks 5-50 ml, full levelThis injection cart is used for pass-through models only. The
cart is extendable for easier loading and is mounted on guide
rails and needs additional spray arms. It is fitted with 56 rilsan
coated injectors (501347900). The injectors have one holder
with a height of 105 mm and the injector height is 95 mm.
Injector diameter is 3 mm. Free loading height is 155 mm (46-4)
or 225 mm (46-5).
Upper injection cart for flasks 5-50 ml, full levelThis injection cart is used for single door models only. The cart
is extendable for easier loading and is mounted on guide rails and
needs additional spray arms. It is fitted with 56 rilsan coated injectors
(501347900). The injectors have one holder with a height of 105 mm
and the injector height is 95 mm. Injector diameter is 3 mm. Free
loading height is 155 mm (46-4) or 225 mm (46-5).
Upper injection cart for flasks 5-50 ml, half levelThis injection cart is used for single door models only. The cart
is extendable for easier loading and is mounted on guide rails and
needs additional spray arms. It is fitted with 28 rilsan coated injectors
(501347900). The injectors have one holder with a height of 105 mm
and the injector height is 95 mm. Injector diameter is 3 mm. Free
loading height is 155 mm (46-4) or 225 mm (46-5).
Art. No. 499259900
Guide rails and spray arms for 46-4 501685901
Guide rails and spray arms for 46-5 501685904
Art. No. 499289500
Guide rails and spray arms for 46-4 501685901
Guide rails and spray arms for 46-5 501685904
Art. No. 499399400
Guide rails and spray arms for 46-4 501685901
Guide rails and spray arms for 46-5 501685904
6. LAb-WAsh cArTs
35
6
7
8
cassette for animal feeding bottles Ø 72 mmThis cassette is mounted in the upper or lower injection
cart (see above) for animal feeding bottles. Up to 30
animal feeding bottles with a Ø 72 mm can be accomo-
dated.
Art.No. 500887700
Lower injection cart for animal feeding bottles Ø 72 mmThis injection cart can accomodate up to 30 animal fee-
ding bottles with Ø 72 mm. Cassette is not included, see
below. The injection cart is suitable for both single door
and pass-through models.
Art.No. 499631000
Upper injection cart for animal feeding bottles Ø 72 mmThis injection cart is used for pass-through models
only. The cart is extendable for easier loading and is
mounted on guide rails and needs additional spray arms.
It can accomodate up to 30 animal feeding bottles with
Ø 72 mm. Cassette is not included, see below.
Art. No. 500878500
Guide rails and spray arms for 46-4 501685901
Guide rails and spray arms for 46-5 501685904
36
6. LAb-WAsh cArTs
ART. NO Rilsan-coated Holder length Injector length
501348300 Yes 170 mm 160 mm
501348400 Yes 200 mm 190 mm
short injectors with longer holdersThe rilsan coated holders with short injectors are suitable for goods such as long tubu-
lar glassware.
Fits in glass cassettes.
ART. NO Rilsan-coated Holder length Injector length
501348100 Yes 105 mm 95 mm
Injector without holderSuitable for very narrow glassware. Fits in glass cassettes.
ART. NO Injector length
498887003 160 mm
498971200 65 mm
Long injectors with three holdersThese holders with long injectors are suitable for taller or wider goods. The holders
are available in two different lengths. The holder is Rilsan-coated, i.e. coated using a
special method that prevents scratching of the glass.
Fits in glass cassettes.
6. LAb-WAsh cArTs
37
6
7
8
ART. NO Rilsan-coated Holder length Injector length
501348000 Yes 105 mm 100 mm
Injector with one holder for flasks 5–25 mlInjector holder with only one holder. The injection pipe is thin, Ø 3 mm which
makes it more suitable for flasks 5-25 ml.
This injector is Rilsan-coated. Fits in glass cassettes.
Injector with one holder and cut plastic profile for flasks 5–25 mlThe holder with cut plastic profiles fits in glass cassettes. The injection pipe is
thin, Ø 3 mm which make it more suitable for flasks 5-25 ml.
This holder is Rilsan-coated.
ART. NO Rilsan-coated Holder length Plastic profile Ø Injector length Injector Ø
501348001 Yes 105 mm 60 mm 100 mm 3 mm
Injector with three holders and cut plastic profileThe holder with cut plastic profiles is used in glass cassettes.
This holder is Rilsan-coated.
ART. NO Rilsan-coated Holder length Plastic profile Ø Injector length Injector Ø
501348101 Yes 105 mm 60 mm 100 mm 6 mm
38
6. LAb-WAsh cArTs
Injector pipes with cut plastic profile for flasks 5-50 ml for injector cartsThis injector pipe can be mounted on one of our injector carts and is suitable for
flasks 5-50 ml. The injectors have one holder with a height of 105 mm and the injec-
tor height is 95 mm. Injector diameter is 3 mm.
Injector pipes for flasks 5-50 ml for injector cartsThis injector pipe is mounted on one of our injector carts and is suitable for flasks 5-
50 ml. The injectors have one holder with a height of 105 mm and the injector height
is 95 mm. Injector diameter is 3 mm.
Injector pipes with three holders for injector cartsThis injector pipe is mounted on one of our injector carts. The injector has three
rilsan coated holders with a length of 170 mm and the injector length is 160 mm.
Injector diameter is 6 mm.
Art. No. 501347900
Art. No. 501347901
Injector pipeThe following injectors with accessories are available for our injec-
tor carts. The injectors can optionally be equipped with nozzles
and/or spring clamps (see article numbers below).
Art. No. 502206300
ART. NO Length of injector Diameter of injector Nozzle for injector Instrument support Spring clamp
477223201 175 mm 6 mm N/A N/A 498886000
477242600 195 mm 10 mm 477242700 502892900 498886003
477242500 340 mm 10 mm 477242700 502892900 498886003
6. LAb-WAsh cArTs
39
6
7
8
Washing cassette for pipettesThis special cassette accommodates up to 150 pipettes of 2 ml or 16 pipettes of 25 ml
and is placed in the pipette cart (see above).
Maximum pipette length is 600 mm.
Drying cassette for pipettesThis drying cassettes accomodates up to 150 pipettes of 2 ml or 16 pipettes of 25 ml
and is placed in the pipette cart (see above).
Mobile container for pipette cassettesThis handy mobile container can be placed next to the test area and easily loaded with
2 washing cassettes for pipettes. After they have been filled, the container is easily
rolled to the washer-disinfector/pipette wash cart.
Art.No. 477115500
Art.No. 477076100
Pipette length Max 300 mm Max 600 mm
Art.No. 498866500 477117400
Pipette cartThis injector cart uses direct injection and is particularly
suitable for pipette washing. Note! The pipette cassette
must be ordered separately!
Art.No. 499288100*
*Washing cassette and baskets are not included.
40
6. LAb-WAsh cArTs
rack for petri dishesThis rack is suitable for washing
different sized petri dishes.
Art.No. Height of petri dishes
468794000 12 mm
468794001 15 mm
468794002 20 mm
basketThis basket is suitable for washing
and disinfecting test tubes.
Art.No. Size
477063301 120 x 120 x 60 mm
477063300 120 x 120 x 120 mm
477063302 120 x 120 x 220 mm
Adjustable lid for basketThis adjustable lid is for
120 x 120 mm baskets and fits
47063300 and 477063301.
Art.No. 498866800
Test-tube basketWhen 4 test-tube baskets are placed together they form
a circle. This ensures highly effective cleaning.
Art.No. 468794400
6. LAb-WAsh cArTs
41
6
7
8
LAb-WAsh cArTsThese Lab wash carts are available in different levels in order to offer maximum flexibility and
adaptability. All carts have removable spray arms and the wash levels can easily be removed as
well. There is a huge variety of additional accessories available to rebuild and equip the lab-
wash carts. Each level can hold up to 10 kgs.
Lab-wash cart, 2 levelsThe lab wash cart washes laboratory glass
ware in two levels.
Art.No. 502688000*
*Instrument trays not included.
Lab-wash cart, 3 levelsThe lab wash cart washes laboratory glass
ware in three levels.
Art.No. 499305100*
*Instrument trays not included.
Lab-wash cart, 4 levelsThe lab wash cart washes laboratory glass
ware in four levels.
Art.No. 499215800*
*Instrument trays not included.
Fits: 46-3, 46-4, 46-5
Fits: 46-3, 46-4, 46-5
Fits: 46-2, 46-3, 46-4, 46-5
42
6. LAb-WAsh cArTs
rack for glasswareThe rack can be fitted in an ordinary OP cart or lower
basic cart. We recommend this rack only for glassware
with an opening larger than 20 mm in diameter. The
glassware is mounted on pins. The pins are available
with different heights, see below.
Rack for glassware Art.No. 490x450 mm
Height 165 mm 498864000
Height 90 mm 498864001
rack for glassware 490x450 mmThe rack can be fitted in an ordinary OP cart or lower
basic cart. We recommend this rack only for glassware
with an opening bigger than 55 mm in diameter and a
minimum height of 100 mm.
Rack for glassware Art.No. 490x450 mm
Height 100 mm 498983400
7A wide range of instrument racks and baskets with well thought-out, proven function. They ensure safe placement in the Washer-Disinfector and complete cleaning of instruments and small parts.
TrAys, bAskETs AND OThEr AccEssOrIEs fOr WAsh cArTs
7
8
44
7. TrAys, bAskETs AND OThEr AccEssOrIEs fOr WAsh cArTs
Instrument tray, sPrI/IsOThese instrument trays are suitable for instrument sets
and smaller parts.
Mesh size: 6.5 mm
Lid for tray, sPrI/IsOThis lid can be locked onto the trays to assure that
instruments and smaller parts remain inside the instru-
ment tray.
Mesh size: 6.5 mm
Instrument trayThis instrument tray is suitable for instrument sets and
smaller parts.
Mesh size 6,5 mm
Description Art. No Dimensions
SPRI/ISO I 466309301 450 x 340 x 70 mm
SPRI/ISO II 466309201 340 x 250 x 70 mm
SPRI/ISO III 466309101 250 x 170 x 70 mm
Description Art. No Dimensions
SPRI/ISO I 477345200 450 x 340 mm
SPRI/ISO II 477345300 340 x 250 mm
SPRI/ISO III 498637400 250 x 170 mm
Art. No Dimensions
498864100 440x240x105 mm
7. TrAys, bAskETs AND OThEr AccEssOrIEs fOr WAsh cArTs
45
7
8
Description Art. No Dimensions
SPRI/ISO II - tight-mesh inner basket 932894 310 x 210 mm
SPRI/ISO III - tight-mesh inner basket 932895 210 x 150 mm
Tight-mesh inner basket, sPrI/IsOThis tight-mesh inner basket is used for smaller instru-
ments or parts of instruments. The basket assures that
these small instruments will not disappear during the
washing phase.
Mesh-size: 1.5 mm
Tight-mesh lid, sPrI/IsOThis lid fits the tight-mesh inner basket above.
Mesh-size: 1.5 mm
Description Art. No Dimensions
SPRI/ISO II - close mesh lid 476944000 310 x 210 mm
SPRI/ISO III - close mesh lid 932896 210 x 150 mm
Art. No Dimensions
498854300 420 x 180 x 100 mm
499187900 490 x 180 x 100 mm
basketThis basket is deeper and suitable for bulkier instru-
ments.
Mesh size: 4 mm
basketThis tight-mesh basket with handles is well suited for
smaller and sharper instruments.
Mesh-size: 1.5 mm
Art. No Dimensions
499363700 100 x 100 x 60 mm
46
7. TrAys, bAskETs AND OThEr AccEssOrIEs fOr WAsh cArTs
Art. No Dimensions
477186600 230 x 120 x 75 (95) mm
basketThis basket is fine meshed and is equipped with a lid.
Well suited for smaller instruments and parts of instru-
ments.
Mesh-size: 1.5 mm
Telescope basketThis basket is suitable for washing and disinfecting lapa-
rascopic instruments. The lid provides an extra security
during the washing process.
Mesh size: 13x13 mm
Tourniquet holderThis special tourniquet holder can be placed on any
wash cart where space allows.
Instrument tray for nasal speculaThis instrument tray is particularly suitable for nasal
specula. The curved forms hold the instruments securely
during the process.
Art. No Dimensions
499039300 340 x 250 x 70 mm
Art. No Dimensions
561620802 460x80x52 mm
Art. No Dimensions
500740800 500x300x166 mm
7. TrAys, bAskETs AND OThEr AccEssOrIEs fOr WAsh cArTs
47
7
8
small instrument holderThis type of instrument holder is suitabile for delicate
instruments which should not lie directly on the stainless
steel trays. In this case, instruments are held between
the green mats. Lower and upper holders must be used
together and combined with an instrument tray. The tray
will protect the holders. Suitable for SPRI/ISO II. Mea-
sures: 325x235 mm
Upper 498849900
Lower 498849901
Art. No 561958501
Instrument holding systemInstruments are placed between the two holders and
held securely in place in the washer-disinfector. The two
lower sawtooth parts of soft rubber material are adjust-
able in width from 60 to 210 mm. The upper holder
allows two holding heights: 8 and 13mm.
Art. No Length
123618 105 mm
468525000 160 mm
circular holder for small hosesThis holder makes sure your hoses are correctly washed
during the process. The cylinder shape is optimal for
washing and disinfection.
Art. No 500442000
springThis spring is mounted in the instrument tray and holds
down the instruments and various smaller pieces during
the washing process. The spring can also be used to af-
fix instruments or plastic pieces directly to the wash cart.
48
7. TrAys, bAskETs AND OThEr AccEssOrIEs fOr WAsh cArTs
Injection pipeInjection pipes are
mounted on the stand for
canulas and can be used
for enhancing the cleaning
and disinfection of tubular
instruments.
Art. No Diameter
498855900 4 mm
Description Dimension Art. No
Luer jet male 6 mm 501399500
Luer jet male 8 mm 501399501
Luer jet female 6 mm 501399400
Luer jet female 8 mm 501399401
stand for canulasThis stand is mounted on a
rack for tubular instruments
or a MIS ramp. Suitable for
canulas 5-10 mm and for
connecting silicone hoses
with nipples.
Description Art. No
Stand for 1 canula, 5-10 mm 477364900
Stand for 4 canulas, 5-10 mm 498634400
hose jetsThis hose jet is used for
connecting a silicone hose
to the injector pipe of a
rack for tubular instru-
ments or for instance a
MIS instrument ramp for an
OP-cart. The jet is screwed
onto the rack or ramp.
Various jetsBelow you will find different
kinds of jets which can be
screwed onto either a rack
for tubular instruments or a
MIS ramp.
Description Art. No
Hose jet 8-16 mm 468946600
Hose jet 12-21 mm 498846100
Description Art. No
Bird hose, bent 498846400
Jet for angle connection 498846600
Luer jetThis luer jet is connected to a silicone hose and can
then be connected to a tubular instrument with a luer
connection, assuring excellent water flow inside the
tubular instrument. Available with male and female
connections and with different measurements.
8Getinge has a wide range of holders and inserts for almost all types of bowls, shoes and baby bottles. The clever design efficiently exposes the goods to the water jets, ensuring effective cleaning.
The upright position of the goods allows quick runoff and effective drying.
sTANDs fOr MIscELLANEOUs ITEMs
8
50
8. sTANDs fOr MIscELLANEOUs ITEMs
sTAND fOr bOWLsThese stands are designed to provide the best possible capacity of different sizes of bowls and
at the same time secure excellent cleaning and disinfection results. The stand is mounted in the
OP-carts and the capacity per OP-cart is shown under each product.
stand for kidney bowlsCapacity: 14 kidney bowls.
stand for bowls 211 mmCapacity: 10 B10*
* B10=Ø 225 x 95 mm
OP-carts Capacity
2-levels 1 stand
3-levels
4-levels
5-levels
Lower wash cart 1 stand
Upper wash cart 1 stand
2 stands (2 shelves and spray arms to be removed)
2 stands (3 shelves and spray arms to be removed)
1 stand(shelves and spray arms to be removed)
OP-carts Capacity
2-levels 1 stand
3-levels 3 stands
4-levels
5-levels
Lower wash cart 1 stand
Upper wash cart 1 stand
2 stands(shelves and spray arms to be removed)
2 stands(shelves and spray arms to be removed)
Dimensions Art. No.
494 x 317 x 40 mm 498850200
Dimensions Art. No.
494 x 407 x 40 mm 498850300
8. sTANDs fOr MIscELLANEOUs ITEMs
51 8
stand for bowls 111 mmCapacity: 18 B6*
* B6=Ø 125 x 55 mm
OP-carts Capacity
2-levels 1 stand
3-levels 3 stands
4-levels 2 stands
5-levels 2 stands
Lower wash cart 1 stand
Upper wash cart 1 stand
stand for bowls 151 mmCapacity: 12 B8*
* B8=Ø 160 x 80 mm
OP-carts Capacity
2-levels 1 stand
3-levels
4-levels
5-levels
Lower wash cart 1 stand
Upper wash cart 1 stand
2 stands (shelves and spray arms to be removed)
2 stands (shelves and spray arms to be removed)
1 stand(shelves and spray arms to be removed)
Dimensions Art. No.
494 x 317 x 40 mm 498859600
Dimensions Art. No.
494 x 317 x 40 mm 498859700
52
8. sTANDs fOr MIscELLANEOUs ITEMs
Dimensions Capacity Art. No.
350 x 350 x 187 mm 24 bottles 476942300
390 x 390 x 160 mm 36 bottles 477071900
OP-carts Capacity
2-levels 1 stand
3-levels
4-levels
5-levels
Lower wash cart 1 stand
Upper wash cart 1 stand
2 stands (shelves and spray arms to be removed)
1 stand(shelves and spray arms to be removed)
sTANDs fOr bAby bOTTLEsThe stands for baby-bottles are designed to optimize capacity while delivering great cleaning and disinfection results.
The stand is equipped with handles for easy loading and unloading of the cart. For bottles with an opening less than
Ø 20 mm, an injection cart should be choosen (see chapter 7 - Lab Wash Carts).
2 stands (shelves and spray arms to be removed)
8. sTANDs fOr MIscELLANEOUs ITEMs
53 8
stand for small baby bottlesThis stand for baby-bottles is designed to optimize
capacity while delivering great cleaning and disinfection
results. The stand is equipped with handles for easy
loading and unloading of the cart.
Dimensions Art. No Capacity
494 x 317 x 40 mm 500696300 24 bottles Ø52 mm
Loading exampleNipples and caps are placed in SPRI/ISO II tray and
fastened with springs with length 160 mm (art. no.
468525000) (see also page 47).
54
8. sTANDs fOr MIscELLANEOUs ITEMs
stand for OP shoesThis rack holds up to 15 pairs of OP shoes for washing
and disinfection at the same time. It is placed in an OP-
wash cart.
The rack for 46-2 has leaning holders to fit under the
spray arm. This rack holds up to 8 pair of OP-shoes. It is
placed in an Lower basic cart.
WASHER-DISINFECTOR Dimensions Art. No. MODEL
46-4, 46-5 565 x 411 x 380 mm 499540900
46-2 395 x 580 x 215 mm 502022400
OP-carts Capacity
3-levels
4-levels
5-levels
Lower wash cart 1 stand
1 stands (shelves and spray arms to be removed)
1 stand(shelves and spray arms to be removed)
stand for OP solesThis rack holds up to 30 soles (15 pairs) for washing and disinfection at the same time. It is placed in a wash cart.
Dimensions Art. No.
590 x 490 x 75 mm 499774600
OP-carts Capacity
4-levels
Lower wash cart 1 stand
Upper wash cart 1 stand
2 stands(shelves and spray arms to be removed)
Fits: 46-4, 46-5
1 stands (shelves and spray arms to be removed)
Traceability:Getinge’s T-DOC software is a highly sophisticated and user-friendly documentation system, offering full instrument traceability and asset management for the healthcare sector.
Education:Getinge Academy provides service training, application training, and technician training upon customer demand, held either at one of the Getinge Academy facilities or at customer sites.
consumables:We offer a complete and compre-hensive range of consumables, which in combination with our application specialists provide efficient and economical output.
Architectural planning:Getinge provides you with planning and design of your facility, for optimal workflow with expertise in infection control.
Equipment:A complete range of washer-disinfectors, sterilizers, loading equipment and system accessories will together provide a total solution for different types of applications.
service and support:Getinge’s own service teams constitute complete installation service, technical support and preventive maintenance for maximum uptime. Worldwide network with technicians.
ALL EQUIPMENT yOU NEED – AND MOrE
www.getinge.com
1925
EN
G 2
011.
12 R
ev.
A ·
Göt
ebor
gstr
ycke
riet
· W
e re
serv
e th
e rig
ht t
o m
ake
tech
nica
l and
con
stru
ctio
n ch
ange
s.
Getinge Infection control AbP O Box 69SE-305 05 GetingeSWEDENPhone: +46 10 335 00 [email protected]