LoaderEngBroch_1580_06_14.compressed(1)

LoadersL1204E I L1506E I L1706E I L1806E I L2106E I L2606E I L2706E

Wheeled Loader

2Serious productivity demands seriousinspiration. Many of the innovativefeatures and advantages of theE-series loaders have come from thebrightest minds in the industry -owners and users such as yourself.

By fully understanding and responding to your needs. TheE-series delivers the most advanced wheeled loader range withclass-leading features available in the market. These productivematerial movers are equipped with spacious cabs,low-maintenance cooling systems, fatigue-beating ergonomicsand even more options. All with the goal of increasing productivityand uptime, while lowering daily operating costs. Owners,operators, and service technicians will benefit from the numerousfeatures found in Bell Loaders.

Customer inspiredProduction driven

L1204E L1506E L1706E L1806E L2106E L2606E L2706E

Rated Net Power 95 kW 125 kW 147 kW 173 kW 197 kW 227 kW 248 kW Bucket Capacity (Heaped) 1.9 m3 2.3 m3 2.7 m3 3.3 m3 3.6 m3 4.4 m3 4.7 m3

Tipping Load (Full Turn) 8 072 kg 9 434 kg 12 031 kg 13 126 kg 14 204 kg 17 123 kg 17 588 kgBreakout Force 8 212 kg 10 284 kg 12 920 kg 15 577 kg 14 445 kg 19 515 kg 18 905 kg

Operating Weight 11 055 kg 12 820 kg 15 185 kg 18 160 kg 19 130 kg 24 182 kg 26 210 kg

2

3PowerTechTM emissions-certified diesel engines deliver power without compromise in all conditions.Torque reserves are impressive, its an E-series advantage that helps maintain excellent boom and bucket speed in and out of the pile. For fully heaped loads, even in wet or hard-packed material.

Low center of gravity and optimized fore-and-aft balance deliver impressive stability and full-turn tippingload capacities. A wide footprint provides additional lateral stability for handling heavy loads and working on rough terrian.

Unsurpassed powertrain and hydraulic performance helps maintain quick ground speed and boom lift,even on steep ramps. For faster cycles.

Customer inspiredProduction driven

4Hard workmade easier

Available premium high/wide-backair-suspension seat adjusts multiple ways for daylong comfort and support.

Brake and throttle pedals have beenrepositioned and the front-consolereshaped to make way for morelegroom and comfort.

You will find plenty of space forfluid bottles to stow a cooler andother carryons. Convenient 12-voltport powers cell phones and otherelectronic devices.

Steering wheel and hydraulic levers arewithin easy reach and move with theoperator for more control with lessfatigue.

Automotive-style directional louversprovide effective airflow to help keepthe glass clear and pressurised cabcomfortable.

Cab noise has been noticeably minimized to help reduce operator fatgue.

Platforms, handrails and steps allowuninterrupted three point access. There are no crossbars, decreasing the risk ofslipping.

Ten-percent more front glass, low-profilefront console, large side and rear windowsallow unsurpassed 360-degree visibility.

Expanded sealed-switch module givesfingertip control of keyless start and 24 other machine functions. Enables the operator to optimally set up the machine to suit operating conditions.

Optional rearview camera and radarobject-detection system give an operatorexceptional rear visibility on the LCDmonitor screen. An audible alert is emittedfor extra awareness in tight and high-trafficareas.

4

5What operator wouldnt be more productive in the high-back suspension seat of an E-series Loader? An enhanced multifunction monitor displays operating and diagnostic info on a colour LCD screen with easy-on-the-eyes clarity.

Expansive tinted front glass and a low-profile console provide a commanding view of the workahead. The quiet and spacious cab boast generous leg room and exceptional ergonomics,including fatigue-beating features like seat-mounted loader controls. And an expanded sealed switchmodule with keyless start and easy push-button operation of even more functionality.

6Maximise yourproductivityIf you want to get a handle on increasedproductivity, put your operator behindthe controls of an E-series Loader.

But its not just their big torque reserves that make them suchimpressive performers. Single-lever joystick controls provide smooth,near-effortless control. Excavator-style hydraulics sense the load anddeliver the flow needed for smooth combined functions and fast workcycles. You wont find a smoother-shifting loader, either. ThePowerShiftTM torque-converter transmission employs SmartShiftTMtechnology to continuously evaluate speed and load conditions, andadjusts clutch-pack engagement to suit.

Standard single-lever joystick with an FNRselector for convenient direction andfull-range gear changes. Includes aninnovative Quick-Shift feature forpushbutton gear changes, one gear at atime.

Programmable clutch cuttoff increasesproductivity in all kinds of conditions.Engaging the brakes disconnects thetransmission while maintaining high engine speed. For smooth dumps, fast cycles, and no machine rollback.

Boom-height kick-out sets maximumdesired dump height, while return-to-carrydetermines lowered-boom position. Usethese two E-series advantages to speedproduction in repetitive loading application.

6

7Optional ride (Standard L2606E andL2706E) control smoothes travel overrough undulated terrain, allowing theseloaders to navigate jobsites more quicklywithout losing their loads for maximummaterial rention.

SmartShiftTM delivers smooth-as-silk gear changes, regardless of whether the bucket is empty or fully loaded.

Spin control boosts productivity byimproving traction in loose material ordifficult underfoot conditions. Reducestyre wear, fuel costs and operatorfatigue.

Responsive steering combines with full80-degree articulation for exceptionalmaneuverability in tight areas - andfaster cycle times.

Load-sensing closed-center hydraulicsdeliver only the power required forsmooth boom and bucket functions.So theres no wasted power or fuel.

7

8UncompromisedUptimeWhen you have hungry hoppers orempty trucks depending on yourloader, downtime is more than adowner. Its unacceptable.

Boost your uptime (and your bottom line) with E-series advantagessuch as solid-state electronics, highly efficient Quad-CoolTM, andan advanced diagnostic monitor. Youll also benefit from traditionaldurability features such as heavy-duty wet-sleeve engines,self-adjusting wet-disc brakes, four-plate loader towers anddouble-tapered articulation-joint roller bearings. When you knowhow theyre built, youll run a Bell.

Quad-CoolTM places the radiator, airconditioner condenser, intercoolerhydraulic, transmission and axle coolers in a unique boxed configuration thats isolated from engine heat. For increased efficiency and durability.

Hydrostatic swing-out fan automaticallyreverses at predetermined intervals, ejecting debris from the radiator and cooler cores. Or choose your own cleaning cycles through the monitor.

Optional (Standard L2606E and L2706E)5-speed transmission with torque converter lockup increases acceleration, speeds cycles and optimizes power and fuel efficiency during transport, roading and ramp climbing.

8

9UncompromisedUptime

Powered cab pre-cleaner provides acleaner interior when working in airborne debris.

Large-capacity fuel tanks let you runlonger between fill-ups.

Find fewer fuses, relays, connecters and wiring harnesses. Instead, highly reliable circuit-board technology and sealed solid-state switches ensure the electrical integrity you need.

Expansive air-inlet surfaces increase airflow and prevent overheating, while keeping the cooling cores debris free. Three-millimeter side-screen perforations serve as a first filter.

Advanced air-screen kits protect theengine and cooling system from debriswhile increasing airflow and preventingoverheating. Sealed-switch module keeps out dust,

moisture and debris. Proven marinegrade touchpad eliminates rocker switches and nearly 100 wires and unsealed connections.

Automatic park brake, bypass-startprotection, continuous handrails and wide slip-resistant steps and platforms help keep operators out of harms way.

9

10

The buckstops hereServicing and maintenance shouldbe simple and cost effective and it ison the E-series.

Swing open the large side panels and youll see the manyways these loaders minimise maintenance. The uniqueQuad-CoolTM system and swing-out fan provide wide-openaccess to both sides of the individually mounted coolers forsimplified cleanout. Grouped sameside service points makequick work of the daily routine. Easy-to read sight gauges,quick-change filters, extended service intervals and advancedself-diagnostics - plus numerous other time and money savingfeatures help make maintenance manageable and improvesowning and operating costs.

Vertical spin-on engine, transmission andin-tank hydraulic filters; quick-release fuelfilters; and environmentally friendly fluiddrains allow quick, no-spill changes.

Conveniently displayed periodic lubrication and maintenance chart helps ensure that nothing is overlooked.

If something goes wrong, the easy-to navigate LCD monitor provides diagnostics info and even offers possibletroubleshooting solutions to reducedowntime.

10

11

The buckstops here

Large hinged service doors swing openwide for ample ground-level access. Alldaily servicing is done on the same side.

Coolers resist plugging, and both sidesare easily accessible for cleaning.Hydraulically driven fan runs only asneeded, reducing fuel consumption and debris flow through the cores.

Lockable compartment swings open,offering convenient ground-level accessto batteries and electrical disconnectswitch.

500, 2 000 and 4 000 hour engine,transmission and hydraulic oil and filterintervals decrease planned downtime and expense.

Technicians will appreciate the commonsense locations and ease with which powertrain, hydraulic and cab filters are replaced. Common hydraulic andtransmission fluid and filter changeintervals further simplify service.

Auto-idle automatically applies the brakes and reduces engine speed to help conserve fuel after a pre determined period of inactivity. Auto shutdown turns off the engine after an extended time of inactivity.

See-through reservoir and sightgauges simplify coolant, hydraulic andtransmission fluid-level checks.

11

12

Technical Data - L1204E

Material

ENGINETypeJohn Deere POWERTECHTME 4045H

Non-road emissions standardCertified to EPA Tier 3 emissions

Cylinders4

Displacement4.5 l

Net Peak Power95 kW @ 2 100 rpm

Net Peak Torque515 Nm @ 1 400 rpm

Fuel SystemHigh Pressure Common Rail,Electronically controlled

AspirationTurbocharged, charge air cooled

Air CleanerDual-element dry type, restrictionindicator in cab monitor for service

Fan DriveHydraulically driven, proportionallycontrolled, fan aft coolers

LubricationFull-flow spin-on filter and integralcooler

Electrical System24 volt with 80-amp alternator(100-amp alternator optional)

Batteries950 CCA (each)

TRANSMISSIONTypeCountershaft-type PowerShiftTM

Torque ConverterSingle stage, single phase

Shift ControlElectronically modulated, adaptive,load and speed dependant

Operator InterfaceJoystick-mounted FNR and gearselect lever, kick-down button onJoystick

Shift ModesManual/auto (1st-4th or 2nd-4th);quick-shift button with two selectablemodes: kick down or kick up/down;and three clutch cutoff settingsadjustable on switch pad

Travel SpeedsForward MaximumGear 1 7.3 km/hGear 2 12.1 km/hGear 3 23.1 km/hGear 4 36.0 km/h

Reverse MaximumGear 1 7.6 km/hGear 2 13.0 km/hGear 3 25.3 km/hGear 4 NA

AXLES /BRAKESFinal DriveHeavy-duty outboard planetary

DifferentialsManual locking front, conventionalrear

Rear Axle Oscilllation, Stop toStop24o

Brakes(conform to SAE J1473, ISO3450)Service BrakesHydraulically actuated, midboard finaldrive carrier mounted, oil cooled, self- adjusting retractors, multi disc

Parking BrakesAutomatic spring applied,hydraulically released, drivelinemounted, oil cooled, multi-disc

TYRESStandard Sizes17.5 x 25, L4, 12 Ply

REFILL CAPACITYFuel Tank(with ground-level fueling)242 l

Cooling System19 l

Engine Oil with Vertical Spin-onFilter17.5 l

Transmission Fluid with VerticalFilter18.5 l

Axle Oil (front and rear)22 l

Hydraulic Reservoir and Filters91 l

Park Brake Oil (wet disc)0.3 l

HYDRAULIC SYSTEM /STEERINGPump (Loader and Steering)Variable-displacement, load-sensingaxial-piston pump; closed-center,pressure-compensating system

Maximium Rated Flow140 l/m @ 6 895 kPa and 2 350 rpm

System Relief Pressure(Loader and Steering)24 821 kPa

Loader ControlsTwo-function valve; single- or duallever controls; control lever lockout feature; optional third- and fourth-function valve with auxiliary lever

Steering (conforms to SAE J1511)TypePower, fully hydraulic

Articulation Angle80 arc (40 each direction)

Hydraulic Cycle Times StandardZ-BarRaise5.9 sec

Dump1.0 sec

Lower (float down)2.4 sec

Total9.3 sec

Turning Radius (measured tocenterline of outside tyre)4.75 m

STANDARD Z-BAR PIN-ONType Bucket InformationStandard Z-Bar Linkage, with Pin-On General-Purpose Bucket withBolt-On, Segments and Teeth

Bucket Type/SizeCapacity, Heaped1.9 m3

Capacity, Struck1.6 m3

Bucket Weight870 kg

Bucket Width2,55 m

Breakout Force7 970 kg

Tipping Load, Straight9 233 kg

Tipping Load, 40o Full Turn8 047 kg

Safe Operating Load4 024 kg

Reach, 45o Dump, Clearance(2.13 m)1.44 m

Reach, 45o Dump, Full Height 1.04 m

Dump Clearance, 45o, Full Height 2.67 m

Overall Length, Bucket on Ground 6.86 m

Loader Clearance Circle, BucketCarry Position11.07 m

Operating Weight11 203 kg

Caliche 1 250Cinders 590Clay and gravel, dry 1 420Clay and gravel, wet 1 540Clay, dry 1 480Clay, natural bed 1 660Clay, wet 1 660Coal, anthracite, broken 1 100Coal, bituminous, broken 830Earth, dry, packed 1 510Earth, loam 1 250

Earth, wet, excavated 1 600Granite, broken or large crushed 1 660Gravel, dry 1 510Gravel, dry 13 to 50 mm 1 690Gravel, pit run (graveled sand) 1 930Gravel, wet 13 to 50 mm 2 020Gypsum, crushed 1 600Limestone, broken or crushed 1 540Magnetite, iron ore 2 790Phosphate rock 1 280Pyrite, iron ore 2 580

Sand and gravel, dry 1 720Sand and gravel, wet 2 020Sand, dry 1 420Sand, wet 1 840Sandstone, broken 1 510Shale 1 250Slag, broken 1 750Stone, crushed 1 600Topsoil 950

LOOSE MATERIAL

kg/m3 kg/m3 kg/m3

13

Dimensions with Pin-On BucketStandard Z-Bar Linkage, with Pin-On General-Purpose Bucket with Bolt-OnSegments and Teeth

A Height to Top of Cab and Canopy 3.15 mB Ground Clearance 0.396 mC Length from Centerline to Front Axle 1.37 mD Wheelbase 2.77 mE Dump Clearance 2.67 mF Height to Hinge Pin, Fully Raised 3.61 mG Dump Reach 1.04 mH Maximum Digging Depth 0.105 mI Overall Length 6.86 mJ Maximum Rollback at Ground Level 41K Maximum Rollback, Boom Fully Raised 55L Maximum Bucket Angle, Fully Raised 50M Overall Bucket Width 2.550 mN Wheel Track 1.910 mO Outside Wheel Width 2.366 mP Full Turn Radius, Inside 4.321 mQ Full Turn Radius, Outside 5.550 m

Attachment OptionsBUCKET OPTONSSize Type Blade/Lip Teeth Cutting Edge1.9 m3 GP Straight Bolt-on 2 strap, male adaptors Segments1.9 m3 GP Straight None 4 Piece Bolt-on1.3 m3 High Density Straight Bolt-on 2 strap, male adaptors Segments1.3 m3 High Density Straight None 4 Piece Bolt-on1.4 m3 High Density Spade None Weld-on Half Arrows3 m3 Coal Straight None 4 Piece Bolt-on3.4 m3 Wood Chip Straight None 4 Piece Bolt-on

QUICK ATTACH BUCKETSSize Type Blade/Lip Teeth Cutting Edge1.9 m3 GP Straight Bolt-on 2 strap, male adaptors Segments1.9 m3 GP Straight None 4 Piece Bolt-on3.4 m3 Wood Chip Straight None 4 Piece Bolt-on

QUICK ATTACH IMPLEMENTS Quick attach pallet fork frame Quick attach materials handling boom Quick attach cane grab

LOG GRABS Load fork log grab Sorting grapple Millyard grapple

I

D

B

K

HC

GAF

E

J

L

K

P

Q

N MO

14


Material

ENGINETypeJohn Deere POWERTECHTME 6068H

Non-road emissions standardCertified to EPA Tier 3 emissions

Cylinders6 (2 valves per cylinder)

Displacement6.8 l



Fuel SystemHigh Pressure Common Rail




LubricationFull-flow spin-on filter and integralcoolerz

Electrical System24 volt with 80-amp alternator(100-amp alternator optional)

Batteries (2 by 12V)950 CCA (each)








AXLES /BRAKESFinal DriveHeavy-duty outboard planetary

DifferentialsManual locking front, conventionalrear


Brakes(conform to SAE J1473, ISO3450)Service BrakesHydraulically actuated, midboard finaldrive carrier mounted, oil cooled, self- adjusting retractors, multi disc




Cooling System23 l

Engine Oil with Vertical Spin-onFilter19 l





HYDRAULIC SYSTEM /STEERINGPump (Loader and Steering)Variable-displacement, load-sensingaxial-piston pump; closed-center,pressure-compensating system



Loader ControlsTwo-function valve; single- or duallever controls; control lever lockout feature; optional third- and fourth-function valve with auxiliary lever


Articulation Angle80o arc (40 each direction)


Dump1.2 sec


Total10.2 sec





Bucket Weight1 046 kg

Bucket Width2,55 m














LOOSE MATERIAL

kg/m3 kg/m3 kg/m3

15



Attachment OptionsBUCKET OPTONSSize Type Blade/Lip Teeth Cutting Edge2.3 m3 GP Straight Bolt-on 2 strap, male adaptors S egments2.3 m3 GP Straight None 4 Piece Bolt-on1.5 m3 High Density Straight Bolt-on 2 strap, male adaptors Segments1.5 m3 High Density Straight None 4 Piece Bolt-on1.6 m3 High Density Spade None Weld-on Half Arrows2.7 m3 Low Density Straight None 4 Piece Bolt-on3.6 m3 Coal Straight None 4 Piece Bolt-on4.5 m3 Wood Chip Straight None 4 Piece Bolt-on

QUICK ATTACH BUCKETSSize Type Blade/Lip Teeth Cutting Edge2.3 m3 GP Straight Bolt-on 2 strap, male adaptors Segments

QUICK ATTACH IMPLEMENTS Quick attach pallet fork frame Quick attach materials handling boom Quick attach cane grab

LOG GRABS Load fork log grab Sorting grapple Millyard grapple

I

D

B

K

HC

GAF

E

J

L

K

P

Q

N MO

16


Material

ENGINETypeJohn Deere POWERTECHTM 6068H

Non-road emissions standardCertified to EPA Tier 2 EU Stage II


Displacement6.8 l








Electrical System24 volt with 80-amp alternator(100-amp alterbator option)









AXLES /BRAKESFinal DriveHeavy-duty inboard-mountedplanetary

DifferentialsHydraulic locking front withconventional rear - standard; duallocking front and rear - optional


Brakes(conform to SAE J1473, ISO3450)Service BrakesHydraulically actuated, inboard sun-shaft mounted, oil cooled, self-adjusting, single disc




Cooling System27 l


Transmission Fluid with VerticalFilter22 l

Axle Oil Front22 l

Axle Oil Rear17 l



HYDRAULIC SYSTEM /STEERINGPump (Loader and Steering)Variable-displacement, axial-pistonpump; closed-center, pressure- compensating system



Loader ControlsTwo-function valve; joystick controlor fingertip controls; hydraulic- functionenable/disable; optionalthird- and fourth-function valve withauxiliary lever




Dump1.3 sec


Total9.9 sec






Bucket Width2.69 m




Safe Operating Load5 989.5 kg










LOOSE MATERIAL

kg/m3 kg/m3 kg/m3

17



Attachment OptionsBUCKET OPTONSSize Type Blade/Lip Teeth Cutting Edge2.7 m3 GP Straight Bolt-on 2 strap, male adaptors Segments2.7 m3 GP Straight None 4 Piece Bolt-on1.7 m3 High Density Straight Bolt-on 2 strap, male adaptors Segments1.7 m3 High Density Straight None 4 Piece Bolt-on1.8 m3 High Density Spade None Weld-on Half Arrows4.2 m3 Coal Straight None 4 Piece Bolt-on4.2 m3 Coal Spade None Weld-on Half Arrows5.5 m3 Wood Chip Straight None 4 Piece Bolt-on

QUICK ATTACH BUCKETSSize Type Blade/Lip Teeth Cutting Edge2.7 m3 GP Straight Bolt-on 2 strap, male adaptors Segments5.5 m3 Wood Chip Straight None 4 Piece Bolt-on

QUICK ATTACH IMPLEMENTS Quick attach pallet fork frame Quick attach materials handling boom Quick attach light materials bucket Quick attach cane grab

LOG GRABS Load fork log grab Large diameter log grab Sorting grapple Millyard grapple

I

D

B

K

HC

GAF

E

J

L

K

P

Q

N MO

18


Material




Displacement6.8 l


Net Peak Torque1 016 Nm @ 1 400 rpm






Electrical System24 volt with 80-amp alternator (100-amp alternator optional)









AXLES /BRAKESFinal DriveHeavy-duty inboard planetary

DifferentialsHydraulic locking front withconventional rear


Brakes(conform to SAE J1473, ISO3450)Service BrakesHydraulically actuated, inboardsun-shaft mounted, oil cooled, self-adjusting, single disc




Cooling System29.5 l









Loader ControlsTwo-function valve; single-dual-levercontrols; control lockout feature;optional third- and fourth-functionvalve with auxiliary lever




Dump1.6 sec


Total11.0 sec






Bucket Width3.04 m














LOOSE MATERIAL

kg/m3 kg/m3 kg/m3

19



Attachment OptionsBUCKET OPTONSSize Type Blade/Lip Teeth Cutting Edge3.3 m3 GP Straight Bolt-on 2 strap, male adaptors Segments3.3 m3 GP Straight None 4 Piece Bolt-on2 m3 High Density Straight Bolt-on 2 strap, male adaptors Segments2 m3 High Density Straight None 4 Piece Bolt-on2.2 m3 High Density Spade None Weld-on Half Arrows2.9 m3 Rock Spade Bolt-on 2 strap, male adaptors Segments2.9 m3 Rock Spade None Weld-on Half Arrows4 m3 Low Density Straight None 4 Piece Bolt-on4.9 m3 Coal Spade None 4 Piece Bolt-on9 m3 Wood Chip Straight None 4 Piece Bolt-on

QUICK ATTACH BUCKETSSize Type Blade/Lip Teeth Cutting Edge3.3 m3 GP Bucket Straight Bolt-on 2 strap, male adaptors Segments4.9 m3 Coal Straight None 4 Piece Bolt-on

QUICK ATTACH IMPLEMENTS Quick attach pallet fork frame Quick attach cane grab


I

D

B

K

HC

GAF

E

J

L

K

P

Q

N MO

20


Material




Displacement9.0 l









Batteries (2 by 12V)1 400 CCA (each)











Brakes(conform to SAE J1473, ISO3450)Service BrakesHydraulically actuated, inboardsun-gear mounted, oil cooled, self-adjusting, single disc

















Dump1.4 sec


Total10.8 sec






Bucket Width3.040 m


Tipping Load, Straight16 392kg












LOOSE MATERIAL

kg/m3 kg/m3 kg/m3

21



Attachment OptionsBUCKET OPTONSSize Type Blade/Lip Teeth Cutting Edge3.6 m3 GP Straight Bolt-on 2 strap, male adaptors Segments3.6 m3 GP Straight None 4 Piece Bolt-on2.2 m3 High Density Straight Bolt-on 2 strap, male adaptors Segments2.2 m3 High Density Straight None 4 Piece Bolt-on2.4 m3 High Density Spade None Weld-on Half Arrows2.4 m3 High Density Spade None 3 Piece Bolt-on2.9 m3 High Density Straight None 4 Piece Bolt-on3.1 m3 Rock Spade Bolt-on 2 strap, male adaptors Segments3.1 m3 Rock Spade None Weld-on Half Arrows5.3 m3 Coal Straight None 4 Piece Bolt-on

QUICK ATTACH BUCKETSSize Type Blade/Lip Teeth Cutting Edge3.6 m3 GP Straight Bolt-on 2 strap, male adaptors Segments5.3 m3 Coal Straight None 4 Piece Bolt-on

QUICK ATTACH IMPLEMENTS Cane grab


I

D

B

K

HC

GAF

E

J

L

K

P

Q

N MO

22


Material




Displacement9.0 l















Travel SpeedsForward Max (5-speed Transmission)Gear 1 7.4 km/hGear 2 14.3 km/hGear 3 22.2 km/hGear 4 32.2 km/hGear 5 40 km/h

Reverse MaximumGear 1 7.4 km/hGear 2 14.3 km/hGear 3 32.3 km/hGear 4 NAGear 5 NA




Brakes(conform to SAE J1473, ISO3450)Service BrakesHydraulically actuated, inboardsun-gear mounted, oil cooled, self-adjusting, single disc










HYDRAULIC SYSTEM /STEERINGPump (Loader and Steering)Two variable-displacement, loadsensing axial-piston pumps, closed-center system







Dump1.6 sec


Total11.2 sec






Bucket Width3.274 m














LOOSE MATERIAL

kg/m3 kg/m3 kg/m3

23


A Height to Top of Cab and Canopy 3.50 mB Ground Clearance 0.462 mC Length from Centerline to Front Axle 1.70 mD Wheelbase 3.46 mE Dump Clearance 3.04 mF Height to Hinge Pin, Fully Raised 4.28 mG Dump Reach 1.23 mH Maximum Digging Depth 0.080 mI Overall Length 9.01 mJ Maximum Rollback at Ground Level 39.5K Maximum Rollback, Boom Fully Raised 54.9L Maximum Bucket Angle, Fully Raised 49.4M Overall Bucket Width 3.274 mN Wheel Track 2.209 mO Outside Wheel Width 2.877 mP Full Turn Radius, Inside 5.326 mQ Full Turn Radius, Outside 6.805 m

Attachment OptionsBUCKET OPTONSSize Type Blade/Lip Teeth Cutting Edge4.4 m3 GP Straight Bolt-on 2 strap, male adaptors Segments4.4 m3 GP Straight None 4 Piece Bolt-on2.7 m3 High Density Straight Bolt-on 2 strap, male adaptors Segments2.7 m3 High Density Straight None 4 Piece Bolt-on2.9 m3 High Density Spade None Weld-on Half Arrows3.9 m3 Rock Spade Bolt-on 2 strap, male adaptors Segments3.9 m3 Rock Spade None 4 Piece Bolt-on6.5 m3 Coal Straight None 4 Piece Bolt-on

IMPLEMENTS Cane grab

LOG GRABS Large diameter log grab Sorting grapple Millyard grapple

I

D

B

K

HC

GAF

E

J

L

K

P

Q

N MO

24


Material




Displacement13.5 l


Net Peak Torque1 619 Nm @ 900 rpm

Fuel SystemMechanically actuated electronic unitinjectors












Travel SpeedsForward Max (5-speed Transmission)Gear 1 8.3 km/hGear 2 14.9 km/hGear 3 23.1 km/hGear 4 33.9 km/hGear 5 40.0 km/h

Reverse MaximumGear 1 8.3 km/hGear 2 14.0 km/hGear 3 33.9 km/hGear 4 NAGear 5 NA

AXLES / BRAKESFinal DriveHeavy-duty inboard planetary



Brakes(conform to SAE J1473, ISO3450)Service BrakesHydraulically actuated, inboardsun-gear mounted, oil cooled, selfadjusting, single disc



REFILL CAPACITYFuel Tank(with ground-level fueling)469.4 l




Axle Oil (front and rear)27.9 l



HYDRAULIC SYSTEM /STEERINGPump (Loader and Steering)Two variable-displacement, load-sensing axial-piston pumps, closed-center system







Dump1.3 sec


Total9.7 sec






Bucket Width3.27 m














LOOSE MATERIAL

kg/m3 kg/m3 kg/m3

25


A Height to Top of Cab and Canopy 3.55 mB Ground Clearance 0.462 mC Length from Centerline to Front Axle 1.70 mD Wheelbase 3.46 mE Dump Clearance 3.19 mF Height to Hinge Pin, Fully Raised 4.48 mG Dump Reach 1.28 mH Maximum Digging Depth 0.115 mI Overall Length 9.26 mJ Maximum Rollback at Ground Level 45.5K Maximum Rollback, Boom Fully Raised 52L Maximum Bucket Angle, Fully Raised 44.1M Overall Bucket Width 3.274 mN Wheel Track 2.291 mO Outside Wheel Width 2.953 mP Full Turn Radius, Inside 5.743 mQ Full Turn Radius, Outside 7.300 m

Attachment OptionsBUCKET OPTONSSize Type Blade/Lip Teeth Cutting Edge4.7 m3 GP Straight Bolt-on 2 strap, male adaptors Segments4.7 m3 GP Straight None 4 Piece Bolt-on2.8 m3 High Density Straight Bolt-on 2 strap, male adaptors Segments2.8 m3 High Density Straight None 4 Piece Bolt-on3 m3 High Density Spade None Weld-on Half Arrows4 m3 Rock Spade Bolt-on 2 strap, male adaptors Segments4 m3 Rock Spade None Weld-on Half Arrows6.8 m3 Coal Straight None 4 Piece Bolt-on

IMPLEMENTS Cane grab

LOG GRABS Large diameter log grab Sorting grapple Millyard grapple

I

D

B

K

HC

GAF

E

J

L

K

P

Q

N MO

26

Notes

27

Notes

Broc

h/15

80/0

6/14

Fro

nt E

nd L

oade

r Bro

chur

e En

glish

BELL INTERNATIONAL: Tel: +27 (0) 35-907 9431E-mail: [email protected] Web: www.bellequipment.com

Tel: +61 (0)8 9356 1033 Tel: +33 (0)5 55 89 23 56 Tel: +49 (0)6631 / 91 13 - 0 Tel: +7 495 287 80 02 Tel: +27 (0)11-928-9700 Tel: +34 91 879 60 19 Tel: +44 (0)1283 712862 Tel: +1 912 527 3309

Please note that all information supplied in this manual is intended to assist the customer in understanding the general applications of the Bell Equipment sugarcane handling range of machines.

Performance information is intended for estimating purposes only. Due to the many variables unique to individual operations such as weather, terrain, ground conditions, operator productivity, etc neither Bell

Equipment Company nor its dealers warrant that the machines described will perform as estimated.

Due to Bell Equipments policy of constant product improvement, specifications are subject to change without notice.

LoaderEngBroch_1580_06_14.compressed(1)

Documents

Transcript of LoaderEngBroch_1580_06_14.compressed(1)