LMAN0008-01
-
Upload
steve-leibovitz -
Category
Documents
-
view
214 -
download
0
Transcript of LMAN0008-01
-
8/13/2019 LMAN0008-01
1/4
LMAN0008-01-EN
ETG-LRP DATA SHEET
10/24/2013 No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice. Page 1o
ETG-LRP Series4 LED Remote Phosphor Linear Low Bay and High Bay Lighting
1. INTRODUCTION
Advanced LED Remote Phosphor (LRP) lighting provides superior efficacy, reduced glare, and even lightingoutput. These lighting products are designed for indoor facility lighting, ranging from 15-60 ceilings, such asindustrial or retail applications. The LRP series glass-free, long lifetime, dimmable design make it a greatlighting solution in many different settings.
2. SPECIFICATIONS
Table 1General Product and Operating Characteristics
ModelCRI
*Red EnhancementCCT Lumens
*estimateTotal Watts Lumens/Watt Replacements
ETG-LRP10608090*
5000K5000K
*6000K*5700K
6060
10095
4 Tube T12150W (HID)
ETG-LRP21608090*
5000K5000K
*15000K*14250K
150150
10095
6 Tube T8400W (HID)
ETG-LRP32408090*
5000K5000K
*24000K*22800K
240240
10095
6 Tube T5400W (HID)
ETG-LRP43208090*
5000K5000K
*30000K*28500K
300300
10095
700W (HID)700W (HID)
ETG-LRP64808090*
5000K5000K
*48000K*45600K
480480
10095
1000W (HID)1000W (HID)
Figure 1 - 2 tube LRP with reflector shown
-
8/13/2019 LMAN0008-01
2/4
LMAN0008-01-EN
ETG-LRP DATA SHEET
10/24/2013 No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice. Page 2o
Table 2Characteristics
Light and Electrical Characteristics
Fixture Watts 60-480WDimming 0-10V > 5%
Ambient Temperature -40C45C
AC Power 100277 VAC or 277-480 VAC
DC Power 48V DC
IP Rating IP65
Fixture Weight 1 Tube3.53 lbs., 2 Tube7.30 lbs., 3 Tube10.9 lbs., 4Tube14.6 lbs., 6 tube21.8 lbs.
Mounting Hook, Cable, or Chain. Recommend ETG-YSM-05 Y cables.
Warranty 5 Years
3. PHOTOMETRICS
Figure 4 - Aisle Candela Polar Plot Figure 3 - High Bay Candela Polar Plot Figure 2 - Low Bay Candela Polar Plot
-
8/13/2019 LMAN0008-01
3/4
LMAN0008-01-EN
ETG-LRP DATA SHEET
10/24/2013 No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice. Page 3o
Figure 5 - CRI Red Enhancement
4. DIMENSIONS
5. PART NUMBER OPTIONS
Choose oneoption from each of the following columns to specify light:
Model Power Supply Automation Color
ETG-LRP10601 TubeETG-LRP2160 2 Tube
ETG-LRP3240 3 Tube
ETG-LRP4320 4 Tube
ETG-LRP6480 6 Tube
-P1
110-227V AC-P2277-480V AC
-P348V DC
-A1Motion Detection-A2Ambient
-A3Ambient & Motion
-1
5000K / 80 CRI-2 4000k / 80CRI
-3 5000K / 90 CRI Red
-44000K / 90 CRI Red
-
8/13/2019 LMAN0008-01
4/4
LMAN0008-01-EN
ETG-LRP DATA SHEET
10/24/2013 No part of this publication may be reproduced without the prior agreement and written permission of Horner Lighting Group, LLC. Information in this document is subject to change without notice. Page 4o
Choose oneof the following reflector sets to come with the light fixture:
Reflectors Model Number
15-30 Feet Low Bay Reflector ETG-LBR1
30-60 Feet High Bay Reflector ETG-HBR1
20-40 feet Aisle Reflector ETG-ABR1
6. PRECAUTIONS
WARNINGRisk of electrical shock. Disconnect power before servicing or installing product.
WARNINGRisk of injury or damage. Unit will fall if not installed properly. Follow installation instructions .
CAUTIONRisk of injury. Wear safety glasses and gloves during installation and servicing.
This luminaire is designed to be used in ambient temperatures of -40C to +45C (-40F to +113F) and be mounted horizontally with
the light source down as shown above. This luminaire should be installed indoors and not in areas with limited ventilation or high
ambient temperatures.
Mounting SpecificationsWeight: 1 Tube3.53 lbs., 2 Tube7.30 lbs., 3 Tube10.9 lbs., 4 Tube14.6 lbs., 6 tube21.8 lbs.
UnboxingOur packaging is designed to protect the luminaire during shipping. Please inspect to confirm it was not damaged.
HandlingOnce unpacked, the luminaire can become damaged if mishandled. Do not stack luminaires after unpacking. Protect the remote
phosphor plate from scratching.
7. TECHNICAL SUPPORT
Tel: (317) 916-4274 | Fax: (317) 639-4279 | Web:http://www.heapg.com | Email:[email protected]
http://www.heapg.com/http://www.heapg.com/http://www.heapg.com/mailto:[email protected]:[email protected]:[email protected]:[email protected]://www.heapg.com/