Liteharbor Lighting catalogue v1
-
Upload
ping-liang -
Category
Documents
-
view
250 -
download
17
description
Transcript of Liteharbor Lighting catalogue v1
Liteharbor mission is to be the premier source of lighting fixtures and products for customers in a wide variety of residential, commercial and industrial settings. To achieve this ambitious goal, Liteharbor Lighting constantly strives for the highest standards of excellence in customer service.
Our unwavering commitment to service and quality has made Liteharbor Lighting one of the world’s leading suppliers of lighting fixtures.
From its inception, Liteharbor Lighting has energetically applied its wealth of human, aesthetic, and technical resources to satisfy the rigorous standards and demanding expectations of professional builders and architects. The meticulous care that we have taken to learn about the sciences of architecture and lighting, combined with our relentless quest for perfection in product quality and performance, has enabled Liteharbor Lighting to maintain an edge over its competitors and repeatedly earn the privilege to serve customers in an extensive array of architectural settings.
Listening to our customers, keeping abreast of the latest developments in our industry, abreast of the latest developments in our industry and constantly implementing improvements in our industry-these are some of the ways we have continued our preeminence in the industry.
COMPANY PROFILE
Liteharbor
Liteharbor Harbor of Light!
2 www.liteharbor.com
Experienced Manufacturer with 10-year Experiences in Lighting.
Leading Manufacturer of Recessed Downlight in China.
One-Stop Manufacturer Supplies All Kinds of Indoor and Outdoor Lights.
Professional Manufacturer Provides Full Lighting Solutions.
Reliable Manufacturer with Full Quality Control System, to Satisfy Our Customers is Our Eternal Tenet.
ODM & OEM Manufacturer with Full Researching and Development Ability.
Liteharbor Warmly Welcome Your Joining!
We Are The One
Liteharbor Lighting
3www.liteharbor.com
TABLE OF CONTENTS
05 118
51 132
57
73
111
ARCHITECTURAL RECESSED HOUSING
TRACK LIGHT
MULTIPLE DOWNLIGHT
EXIT EMERGENCY LIGHTCOMMERCIAL RECESSED HOUSING
RESIDENTIAL RECESSED HOUSING
LED RETROFIT
194
PENDANT LIGHT
166
WALL SCONCE
188
LED TUBE & BULB
156
CABINET LIGHT
169
172
MIRROR LIGHT
OUTDOOR LIGHT
161
CEILING LIGHT
Liteharbor Lighting Technology Co.,Ltd.Recessed Downlight Leader China Manufacturer
6 www.liteharbor.com
ARCHITECTURAL LED
4" Architectural LED Downlight
Description
LED Module
Reflector Assembly
Reflector
Listing
Thermal Protector
Driver
Electrical System
Frame
Clearance
Mounting
Junction Box
¾ Lighting is smooth and comfortable while using 50% less energy than the common CFL downlight.
¾ Eco-friendly no lead or mercury ¾ Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlights to save anywhere from 35% up to 75% on energy cost.
¾ Ideal suited for use in commercial, retail and other architectural applications
¾ Available with dedicated Emergency Battery Back-up
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 3000K-5000K ¾ Rated for 50000 hours at 70% lumen output ¾ No heat, mercury or UV
¾ Reflector easily wires to dedicated frame with locking quick connect
¾ High quality reflector with 1.2mm thickness ¾ Optional painted white flange is available
¾ ETL listed for damp location W/Feed through
¾ External thermal device is located on the junction box wrap.
¾ The LED driver is mounted to the J-box cover and is accessible from below the ceiling.
¾ Rated for 50Hz to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Thermal protection guard protects the LED module from overheating and will dim LED module if necessary
¾ PF>0.9 ¾ Fully dimmable down to 10% of initial light output with a 0-10 Volt dimmer
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection.
¾ Frames require a minimum clearance of 3” ring from thermal insulation and 1/2” from adjacent building component.
¾ Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlights.
¾ Flex is designed to attach into existing junction box.
¾ Vertically adjustable universal mounting brackets accept flat bar hangers, conduit or C-channel
¾ The reflector assembly is held in with 4 “butter-fly” spring clips.
¾ Reflector assy quickly attaches with lockable quick connect. Hanger bars ordered separately.
¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT
¾ Plaster frame integrated 29 cubic inch 0.064" thick galvanized steel
¾ Provided with four ½" knockouts, one ¾" knockout and four Romex knockouts with true pryout slots and strain clamps.
¾ Designed for straight through conduit runs. ¾ Electrical connections are made through a single junction box door.
¾ Green wire provided for installation with ground wire fed through PVC pipe conduit.Input Power Lumens
11W (+/- 5%) 900LM15W (+/- 5%) 1200LM18W (+/- 5%) 1500LM25W (+/- 5%) 2000LM
ORDER MATRIX
Reflector Matrix
Example: AL4-VA1
A
F
G
B
A
C
B
E
D
AL4-VA1
CreeCitizenEpistar
SeoulOsram
L11
30K
EM
C
SF
CR
C
U
L15
DM
L18L25
40K
C
50K
FH
277
SFW
SB
HZWH
Series
LED Available
Wattage
Dimmable
Input Voltage
Trim
Lens Type
Reflector Finish
4" Architectural DownlightLED
CreeCitizenEpistarSeoulOsram
11W
Non-Dimmable
3000K
Emergency Backup
Color Temperature
Options
120V
Self Flanged
Clear Tempered
Clear
120-277V
NO Flange White
15W
Dimmable
18W25W
4000K
C-Channel Bar Hanger
5000K
Flat Bar HangerWood Joist Bar Hanger
277V
Self Flanged White
Sand Blasted
Haze
A
A
B
B
C
C
D E G F
7www.liteharbor.com
ARCHITECTURAL LED
ORDER MATRIX Example: AL6-VA1
A
F
G
AL6-VA1
30K
EM
40K
C
50K
FH
Series
6" Architectural Downlight
3000K
Emergency Backup
Color Temperature
Options
4000K
C-Channel Bar Hanger
5000K
Flat Bar HangerWood Joist Bar Hanger
A B C D E G F
6" Architectural LED Downlight
Description
LED Module
Reflector Assembly
Reflector
Listing
Thermal Protector
Driver
Electrical System
Frame
Clearance
Mounting
Junction Box
¾ Lighting is smooth and comfortable while using 50% less energy than the common CFL downlight.
¾ Eco-friendly no lead or mercury ¾ Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlights to save anywhere from 35% up to 75% on energy cost.
¾ Ideal suited for use in commercial, retail and other architectural applications
¾ Available with dedicated Emergency Battery Back-up
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 3000K-5000K ¾ Rated for 50000 hours at 70% lumen output ¾ No heat, mercury or UV
¾ Reflector easily wires to dedicated frame with locking quick connect
¾ High quality reflector with 1.2mm thickness ¾ Optional painted white flange is available
¾ ETL listed for damp location W/Feed through
¾ External thermal device is located on the junction box wrap.
¾ The LED driver is mounted to the J-box cover and is accessible from below the ceiling.
¾ Rated for 50Hz to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Thermal protection guard protects the LED module from overheating and will dim LED module if necessary
¾ PF>0.9 ¾ Fully dimmable down to 10% of initial light output with a 0-10 Volt dimmer.
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection.
¾ Frames require a minimum clearance of 3” ring from thermal insulation and 1/2” from adjacent building component.
¾ Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlights.
¾ Flex is designed to attach into existing junction box.
¾ Vertically adjustable universal mounting brackets accept flat bar hangers, conduit or C-channel
¾ The reflector assembly is held in with 4 “butter-fly” spring clips.
¾ Reflector assy quickly attaches with lockable quick connect. Hanger bars ordered separately.
¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT
¾ Plaster frame integrated 29 cubic inch 0.064" thick galvanized steel
¾ Provided with four ½" knockouts, one ¾" knockout and four Romex knockouts with true pryout slots and strain clamps.
¾ Designed for straight through conduit runs. ¾ Electrical connections are made through a single junction box door.
¾ Green wire provided for installation with ground wire fed through PVC pipe conduit.
Input Power Lumens16W (+/- 5%) 1250LM25W (+/- 5%) 2000LM37W (+/- 5%) 3000LM
Reflector Matrix
A
C
B
SF
CR
CSFW
SB
HZWH
Trim
Lens Type
Reflector Finish
Self Flanged
Clear Tempered
Clear
NO Flange WhiteSelf Flanged White
Sand Blasted
Haze
A B C
LED
B
U277
Input Voltage
120V
120-277V277V
CreeCitizenEpistar
SeoulOsram
C LED Available
CreeCitizenEpistarSeoulOsram
E
D
L16L25
DM
L37
Wattage
Dimmable
16W
Non-Dimmable
25W
Dimmable
37W
8 www.liteharbor.com
ARCHITECTURAL LED
8" Architectural LED Downlight
Description
LED Module
Reflector Assembly
Reflector
Listing
Thermal Protector
Driver
Electrical System
Frame
Clearance
Mounting
Junction Box
¾ Lighting is smooth and comfortable while using 50% less energy than the common CFL downlight.
¾ Eco-friendly no lead or mercury ¾ Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlights to save anywhere from 35% up to 75% on energy cost.
¾ Ideal suited for use in commercial, retail and other architectural applications
¾ Available with dedicated Emergency Battery Back-up
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 3000K-5000K ¾ Rated for 50000 hours at 70% lumen output ¾ No heat, mercury or UV
¾ Reflector easily wires to dedicated frame with locking quick connect
¾ High quality reflector with 1.2mm thickness ¾ Optional painted white flange is available
¾ ETL listed for damp location W/Feed through
¾ External thermal device is located on the junction box wrap.
¾ The LED driver is mounted to the J-box cover and is accessible from below the ceiling.
¾ Rated for 50Hz to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Thermal protection guard protects the LED module from overheating and will dim LED module if necessary
¾ PF>0.9 ¾ Fully dimmable down to 10% of initial light output with a 0-10 Volt dimmer
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection.
¾ Frames require a minimum clearance of 3” ring from thermal insulation and 1/2” from adjacent building component.
¾ Designed to install into an existing downlights mounting frame and convert them into energy efficient LED downlights.
¾ Flex is designed to attach into existing junction box.
¾ Vertically adjustable universal mounting brackets accept flat bar hangers, conduit or C-channel
¾ The reflector assembly is held in with 4 “butter-fly” spring clips.
¾ Reflector assy quickly attaches with lockable quick connect. Hanger bars ordered separately.
¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT
¾ Plaster frame integrated 29 cubic inch 0.064" thick galvanized steel
¾ Provided with four ½" knockouts, one ¾" knockout and four Romex knockouts with true pryout slots and strain clamps.
¾ Designed for straight through conduit runs. ¾ Electrical connections are made through a single junction box door.
¾ Green wire provided for installation with ground wire fed through PVC pipe conduit.
Input Power Lumens25W (+/- 5%) 2000LM37W (+/- 5%) 3000LM50W(+/- 5%) 4000LM
ORDER MATRIX
Reflector Matrix
Example: AL8-VA1
A
F
G
A
C
B
AL8-VA1
30K
EM
SF
CR
C
40K
C
50K
FH
SFW
SB
HZWH
Series
Trim
Lens Type
Reflector Finish
8" Architectural Downlight
3000K
Emergency Backup
Color Temperature
Options
Self Flanged
Clear Tempered
Clear
NO Flange White
4000K
C-Channel Bar Hanger
5000K
Flat Bar HangerWood Joist Bar Hanger
Self Flanged White
Sand Blasted
Haze
A
A
B
B
C
C
D E G F
LED
B
U277
Input Voltage
120V
120-277V277V
CreeCitizenEpistar
SeoulOsram
C LED Available
CreeCitizenEpistarSeoulOsram
E
D
L25L37
DM
L50
Wattage
Dimmable
25W
Non-Dimmable
37W
Dimmable
50W
9www.liteharbor.com
ARCHITECTURAL LED
ORDER MATRIX Example: A4-VA
A
E
B
D
A4-VA
P20P30
L10
28K
C
L18
35K50K65K
277U
Series
Lamp
Wattage
Input Voltage
4" Architectural Vertical Housing
PAR20PAR30
10W
2800K
Color Temperature
120V
18W
3500K5000K6500K
277V120-277V
A B C D E F
4" Architectural Vertical Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Socket
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring(4 in, 4 out)
¾ E26 medium base
¾ LED PAR20 10W max ¾ LED PAR30 18W max ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
10 www.liteharbor.com
ARCHITECTURAL LED
ORDER MATRIX Example: A6-VA
A
E
B
D
A6-VA
P30
A19P38
A21
L24L18
28K
C
L12L17
35K50K65K
277U
Series
Lamp
Wattage
Input Voltage
6" Architectural Vertical Housing
PAR30
A19PAR38
A21
24W18W
2800K
Color Temperature
120V
12W17W
3500K5000K6500K
277V120-277V
A B C D E F
6" Architectural Vertical Housing
Mounting
Reflector
Socket Cup
Junction Box
Socket
Lamp
Thermal Protector
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring(4 in, 4 out)
¾ E26 medium base
¾ LED PAR30 18W max. ¾ LED PAR38 24W max. ¾ LED A19 12W max. ¾ LED A21 17W max. ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
11www.liteharbor.com
ARCHITECTURAL LED
RV6002
RC608 RC166
RC6026 inch Vertical ReflectorSelf Flanged/White Ring
6 inch Vertical Cross BladeWhite Ring
6 inch Vertical Reflector with Drop GlassSelf Flanged
6 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC6036 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV6126 inch Vertical Reflector with BaffleWhite Ring
12 www.liteharbor.com
ARCHITECTURAL LED
E
B
D
P30
A19P38
A21
L24L18
28K
C
L12L17
35K50K65K
277U
Lamp
Wattage
Input Voltage
PAR30
A19PAR38
A21
24W18W
2800K
Color Temperature
120V
12W17W
3500K5000K6500K
277V120-277V
6" Architectural Vertical Remodel Housing
Mounting
Reflector
Socket Cup
Junction Box
Socket
Lamp
Thermal Protector
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available ¾ Optional painted white flange is available
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots and strain clamps
¾ Provided with removable access plates ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ E26 medium base
¾ LED PAR30 18W max. ¾ LED PAR38 24W max. ¾ LED A19 12W max. ¾ LED A21 17W max. ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
ORDER MATRIX Example: A6R-VA
A
A6R-VA
Series
6" Architectural Vertical Remodel Housing
A B C D E
Listing ¾ ETL listed for damp location W/Feed through
13www.liteharbor.com
ARCHITECTURAL LED
RV6002
RC608 RC166
RC6026 inch Vertical ReflectorSelf Flanged/White Ring
6 inch Vertical Cross BladeWhite Ring
6 inch Vertical Reflector with Drop GlassSelf Flanged
6 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC6036 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV6126 inch Vertical Reflector with BaffleWhite Ring
14 www.liteharbor.com
ARCHITECTURAL LED
E
B
D
A19
28K
C
L12
35K50K65K
277U
Lamp
Wattage
Input Voltage
A19
2800K
Color Temperature
120V
12W
3500K5000K6500K
277V120-277V
6" Architectural Vertical Wall Washer Housing
Mounting
Reflector
Socket Cup
Junction Box
Socket
Lamp
Thermal Protector
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation
¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring(4 in, 4 out)
¾ E26 medium base
¾ LED A19 12W max. ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
ORDER MATRIX Example: A6W-VA
A
A6W-VA
Series
6" Architectural Vertical Housing
A B C D E F
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
15www.liteharbor.com
ARCHITECTURAL LED
ORDER MATRIX Example: A8-VA
A
E
B
D
A8-VA
P30
A19P38
A21A23
L24L18
28K
C
L12L17L20
35K50K65K
277U
Series
Lamp
Wattage
Input Voltage
8" Architectural Vertical Housing
PAR30
A19PAR38
A21A23
24W18W
2800K
Color Temperature
120V
12W17W20W
3500K5000K6500K
277V120-277V
A B C D E F
8" Architectural Vertical Housing
Mounting
Reflector
Socket Cup
Junction Box
Socket
Lamp
Thermal Protector
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring(4 in, 4 out)
¾ E26 medium base
¾ LED PAR30 18W max. ¾ LED PAR38 24W max. ¾ LED A19 12W max. ¾ LED A21 17W max. ¾ LED A23 20W max. ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
16 www.liteharbor.com
ARCHITECTURAL LED
RV8002
RC808 RC188
RC8028 inch Vertical ReflectorSelf Flanged/White Ring
8 inch Vertical Cross BladeWhite Ring
8 inch Vertical Reflector with Drop GlassSelf Flanged
8 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC8038 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV8128 inch Vertical Reflector with BaffleWhite Ring
17www.liteharbor.com
ARCHITECTURAL LED
E
B
D
P30
A19P38
A21A23
L24L18
28K
C
L12L17L20
35K50K65K
277U
Lamp
Wattage
Input Voltage
PAR30
A19PAR38
A21A23
24W18W
2800K
Color Temperature
120V
12W17W20W
3500K5000K6500K
277V120-277V
8" Architectural Vertical Remodel Housing
Mounting
Reflector
Socket Cup
Junction Box
Socket
Lamp
Thermal Protector
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available ¾ Optional painted white flange is available
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots and strain clamps
¾ Provided with removable access plates ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ E26 medium base
¾ LED PAR30 18W max. ¾ LED PAR38 24W max. ¾ LED A19 12W max. ¾ LED A21 17W max. ¾ LED A23 20W max. ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
ORDER MATRIX Example: A8R-VA
A
A8R-VA
Series
8" Architectural Vertical Remodel Housing
A B C D E
Listing ¾ ETL listed for damp location W/Feed through
18 www.liteharbor.com
ARCHITECTURAL LED
RV8002
RC808 RC188
RC8028 inch Vertical ReflectorSelf Flanged/White Ring
8 inch Vertical Cross BladeWhite Ring
8 inch Vertical Reflector with Drop GlassSelf Flanged
8 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC8038 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV8128 inch Vertical Reflector with BaffleWhite Ring
19www.liteharbor.com
ARCHITECTURAL LED
Mounting
Reflector
Socket Cup
Junction Box
Socket
Lamp
Thermal Protector
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation
¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring(4 in, 4 out)
¾ E26 medium base
¾ LED A19 12W max. ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
ORDER MATRIX Example: A8W-VA
A B C D E F
Listing ¾ ETL listed for damp location W/Feed through
E
B
D
A19
28K
C
L12
35K50K65K
277U
Lamp
Wattage
Input Voltage
A19
2800K
Color Temperature
120V
12W
3500K5000K6500K
277V120-277V
A
A8W-VA
Series
8" Architectural Vertical Housing
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
8" Architectural Vertical Wall Washer Housing
20 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF4-VA
A
B
AF4-VA
131826
C
277U
Series
Lamp/Wattage
Input Voltage
4" Vertical Architectural HousingCompact Fluorescent
DTT/ TRT 13W DTT/ TRT 18W DTT/ TRT 26W
120V277V120-277V
A B C D E F
4" Architectural Vertical Compact Fluorescent Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18/26W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2700K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
21www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF4S
A
B
AF4S
13182632
C
277U
Series
Lamp/Wattage
Input Voltage
4" Horizontal Architectural HousingCompact Fluorescent
DTT 13W DTT 18W TRT 26W TRT 32W
120V277V120-277V
A B C D E F
4"X4" Square Horizontal Compact Fluorescent Recessed Downlight
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18W DTT ¾ 26/32W TRT ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2700K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
RC519RC5144" Open ReflectorGrade Reflector, 1.2mm thickness
4" Lensed ReflectorGrade Reflector, 1.2mm thickness. 1-1/2” regressed lensWet location listed
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
22 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF6-VA
A
B
AF6-VA
1318263242
C
277U
Series
Lamp/Wattage
Input Voltage
6" Vertical Architectural HousingCompact Fluorescent
DTT/ TRT 13W DTT/ TRT 18W DTT/ TRT 26W TRT 32W TRT 42W
120V277V120-277V
A B C D E F
6" Architectural Vertical Compact Fluorescent Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18/26/32/42W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2700K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
23www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
RV6002
RC608 RC166
RC6026 inch Vertical ReflectorSelf Flanged/White Ring
6 inch Vertical Cross BladeWhite Ring
6 inch Vertical Reflector with Drop GlassSelf Flanged
6 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC6036 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV6126 inch Vertical Reflector with BaffleWhite Ring
24 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF6R-VA
A
B
AF6R-VA
1318263242
C
277U
Series
Lamp/Wattage
Input Voltage
6" Vertical Architectural Remodel HousingCompact Fluorescent
DTT/ TRT 13W DTT/ TRT 18W DTT/ TRT 26W TRT 32W TRT 42W
120V277V120-277V
A B C D E
6" Architectural Vertical Remodel Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18/26/32/42W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2700K-6500K
Listing ¾ ETL listed for damp location W/Feed through
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
25www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
RV6002
RC608 RC166
RC6026 inch Vertical ReflectorSelf Flanged/White Ring
6 inch Vertical Cross BladeWhite Ring
6 inch Vertical Reflector with Drop GlassSelf Flanged
6 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC6036 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV6126 inch Vertical Reflector with BaffleWhite Ring
26 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF6W-VA
A
B
D
AF6W-VA
EED
277U
Series
Ballast
Input Voltage
6" Vertical Wall Washer HousingCompact Fluorescent
No Ballast
120V
Electronic BallastDimmable Electronic Ballast
277V120-277V
A B C D E F
6" Architectural Vertical Compact Fluorescent Wall Washer Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring(4 in, 4 out)
¾ 13/18/26/32/42W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
E
C
28
F
32
H
5065
C-channel Bar Hanger
2800K
Options
Color Temperature
Flat Bar Hanger
3500K
Wood Joist Bar Hanger
5000K6500K
1318263242
C Lamp/Wattage
DTT/ TRT 13W DTT/ TRT 18W DTT/ TRT 26W TRT 32W TRT 42W
Ballast ¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
27www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF8-VA
A
B
AF8-VA
1318263242
C
277U
Series
Lamp/Wattage
Input Voltage
8" Vertical Architectural HousingCompact Fluorescent
DTT/ TRT 13W DTT/ TRT 18W DTT/ TRT 26W TRT 32W TRT 42W
120V277V120-277V
A B C D E F
8" Architectural Vertical Compact Fluorescent Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18/26/32/42W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2700K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
28 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
RV8002
RC808 RC188
RC8028 inch Vertical ReflectorSelf Flanged/White Ring
8 inch Vertical Cross BladeWhite Ring
8 inch Vertical Reflector with Drop GlassSelf Flanged
8 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC8038 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV8128 inch Vertical Reflector with BaffleWhite Ring
29www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF8R-VA
A
B
AF8R-VA
1318263242
C
277U
Series
Lamp/Wattage
Input Voltage
8" Vertical Architectural Remodel HousingCompact Fluorescent
DTT/ TRT 13W DTT/ TRT 18W DTT/ TRT 26W TRT 32W TRT 42W
120V277V120-277V
A B C D E
8" Architectural Vertical Remodel Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18/26/32/42W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2700K-6500K
Listing ¾ ETL listed for damp location W/Feed through
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
30 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
RV8002
RC808 RC188
RC8028 inch Vertical ReflectorSelf Flanged/White Ring
8 inch Vertical Cross BladeWhite Ring
8 inch Vertical Reflector with Drop GlassSelf Flanged
8 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC8038 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV8128 inch Vertical Reflector with BaffleWhite Ring
31www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF8W-VA
A B C D E F Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring(4 in, 4 out)
¾ 13/18/26/32/42W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
Listing ¾ ETL listed for damp location W/Feed through
A
B
D
AF8W-VA
EED
277U
Series
Ballast
Input Voltage
8" Vertical Wall Washer HousingCompact Fluorescent
No Ballast
120V
Electronic BallastDimmable Electronic Ballast
277V120-277V
F
E
C
28
F
32
H
5065
C-channel Bar Hanger
2800K
Options
Color Temperature
Flat Bar Hanger
3500K
Wood Joist Bar Hanger
5000K6500K
8" Architectural Vertical Compact Fluorescent Wall Washer Housing
1318263242
C Lamp/Wattage
DTT/ TRT 13W DTT/ TRT 18W DTT/ TRT 26W TRT 32W TRT 42W
Ballast ¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
32 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF6-HA
A
B
AF6-HA
13
42
18
213
26
218
32
226
C
277U
Series
Lamp/Wattage
Input Voltage
6" Horizontal Architectural HousingCompact Fluorescent
DTT 13W
TRT 42W
DTT 18W
DTT 2*13W
DTT/TRT 26W
DTT 2*18W
TRT 32W
DTT 2*26W
120V277V120-277V
A B C D E F
6" Architectural Horizontal Compact Fluorescent Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18/26/32/42/2*13/2*18/2*26W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
33www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
RH6002
RCH166
6 inch Horizontal ReflectorSelf Flanged/White Ring
6 inch Horizontal Reflector with Drop GlassSelf Flanged
RC6136 inch Horizontal Baffle with Regressed LensWhite Ring
RC6116 inch Horizontal Reflector with BaffleWhite Ring
RC6146 inch Horizontal Cross BladeWhite Ring
RC6126 inch Horizontal Reflector with Regressed LensSelf Flanged/White Ring
34 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF6R-HA
A
B
AF6R-HA
277U
Series
Input Voltage
6" Horizontal Architectural HousingCompact Fluorescent
120V277V120-277V
A B C D E
6" Architectural Horizontal Compact Fluorescent Remodel Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18/26/32/42/2*13/2*18/2*26W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2800K-6500K
Listing ¾ ETL listed for damp location W/Feed through
13
42
18
213
26
218
32
226
C Lamp/Wattage
DTT 13W
TRT 42W
DTT 18W
DTT 2*13W
DTT/TRT 26W
DTT 2*18W
TRT 32W
DTT 2*26W
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
35www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
RH6002
RCH166
6 inch Horizontal ReflectorSelf Flanged/White Ring
6 inch Horizontal Reflector with Drop GlassSelf Flanged
RC6136 inch Horizontal Baffle with Regressed LensWhite Ring
RC6116 inch Horizontal Reflector with BaffleWhite Ring
RC6146 inch Horizontal Cross BladeWhite Ring
RC6126 inch Horizontal Reflector with Regressed LensSelf Flanged/White Ring
36 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF8-HA
A
B
AF8-HA
1318263242
C
277U
Series
Lamp/Wattage
Input Voltage
8" Horizontal Architectural HousingCompact Fluorescent
DTT 13WDTT 18WDTT/TRT 26WTRT 32WTRT 42W
120V277V120-277V
A B C D E F
8" Architectural Horizontal Compact Fluorescent Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18/26/32/42/2*13/2*18/2*26/2*32/2*42W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2700K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
213218
232226
242
DTT 2*13WDTT 2*18W
TRT 2*32WDTT/TRT 2*26W
TRT 2*42W
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
37www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
RH8002
RCH188
8 inch Horizontal ReflectorSelf Flanged/White Ring
8 inch Horizontal Reflector with Drop GlassSelf Flanged
RC8138 inch Horizontal Baffle with Regressed LensWhite Ring
RC8118 inch Horizontal Reflector with BaffleWhite Ring
RC8148 inch Horizontal Cross BladeWhite Ring
RC8128 inch Horizontal Reflector with Regressed LensSelf Flanged/White Ring
38 www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
ORDER MATRIX Example: AF8R-HA
A
B
AF8R-HA
277U
Series
Input Voltage
8" Horizontal Architectural HousingCompact Fluorescent
120V277V120-277V
A B C D E
8" Architectural Horizontal Compact Fluorescent Remodel Housing
Mounting
Reflector
Thermal Protector
Socket Cup
Junction Box
Ballast
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar wood joist bar hanger and EMT. ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types.
¾ Optional painted white flange is available ¾ Single position optics eliminate possibility of specified lamp being installed in incorrect position
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts ¾ Provided with removable access plates ¾ Knockouts equipped with pry out slots ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ Thermally protected ¾ Electronic ballast provides full light output and rated lamp life ¾ Flicker free and noise free operation and starting ¾ End of lamp life protection is standard ¾ Meet FCC EMT/FRI consumer limits ¾ Attached to junction box cover so it may be serviced from below the ceiling no tools required
¾ 13/18/26/32/42/2*13/2*18/2*26/2*32/2*42W 4 pin ¾ Universal G24 4-PIN ¾ CRI>80% ¾ PF>0.9 ¾ Color Temperature: 2700K-6500K
Listing ¾ ETL listed for damp location W/Feed through
D
EED
Ballast
No BallastElectronic BallastDimmable Electronic Ballast
1318263242
C Lamp/Wattage
DTT 13WDTT 18WDTT/TRT 26WTRT 32WTRT 42W
213218
232226
242
DTT 2*13WDTT 2*18W
TRT 2*32WDTT/TRT 2*26
TRT 2*42W
E
28K35K50K65K
2800K
Color Temperature
3500K5000K6500K
39www.liteharbor.com
ARCHITECTURAL COMPACT FLUORESCENT
RH8002
RCH188
8 inch Horizontal ReflectorSelf Flanged/White Ring
8 inch Horizontal Reflector with Drop GlassSelf Flanged
RC8138 inch Horizontal Baffle with Regressed LensWhite Ring
RC8118 inch Horizontal Reflector with BaffleWhite Ring
RC8148 inch Horizontal Cross BladeWhite Ring
RC8128 inch Horizontal Reflector with Regressed LensSelf Flanged/White Ring
40 www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
ORDER MATRIX Example: AM4-VA
A
E
D
C
AM4-VA
E
P20
28K
B
P30
35K50K65K
277U
Series
Ballast
Lamp/ Wattage
Input Voltage
4" Vertical Architectural HousingHID Metal Halide
No BallastElectronic Ballast
PAR20MH 20W
2800K
Color Temperature
120V
PAR30MH/ 39W/ 70W
3500K5000K6500K
277V120-277V
A B C D E F
4" Architectural Vertical HID Metal Halide Housing
Mounting
Reflector
Ballast
Thermal Protector
Socket Cup
Junction Box
Socket
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar, wood joist bar hanger and EMT ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available ¾ Optional painted white flange is available
¾ High power factor electronic HID metal halide ballast ¾ 120V or 277V input voltage at 50/60Hz ¾ High power factor ¾ Harmonic distortion<15% ¾ Thermally protected ¾ Minimum ballast temp=-15℃ ¾ Sound rated A
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots and strain clamps
¾ Provided with removable access plates ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ E26 medium base
¾ 20W PAR20MH/PAR30MH ¾ 39W PAR20MH/PAR30MH ¾ 70W PAR30MH ¾ Color Temperature: 2800K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
41www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
ORDER MATRIX Example: AM420-VA
A
D
B
C
AM420-VA
E
T6
28K
E
T4.5
35K50K65K
277U
Series
Ballast
Lamp
Input Voltage
4" Vertical Architectural HousingHID Metal Halide
No BallastElectronic Ballast
T6
2800K
Color Temperature
120V
T4.5
3500K5000K6500K
277V120-277V
A B C D E G F
4" Architectural Vertical HID Metal Halide Housing
Mounting
Reflector
Ballast
Thermal Protector
Socket Cup
Junction Box
Lamp & Socket
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar, wood joist bar hanger and EMT ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available ¾ Optional painted white flange is available
¾ High power factor electronic HID metal halide ballast ¾ 120V or 277V input voltage at 50/60Hz ¾ High power factor ¾ Harmonic distortion<15% ¾ Thermally protected ¾ Minimum ballast temp=-15℃ ¾ Sound rated A
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots and strain clamps
¾ Provided with removable access plates ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ T6 G12 Base-20/39/70/100W ¾ T4.5 G8.5 Base-20/39/70W ¾ Color Temperature: 2800K-6500K
Listing ¾ ETL listed for damp location W/Feed through
F
G
20
C
39
F
70100
H
20W
C-channel Bar Hanger
Wattage
Options
39W
Flat Bar Hanger
70W100W
Wood Joist Bar Hanger
42 www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
ORDER MATRIX Example: AM6-VA
A
E
B
C
AM6-VA
E
P30
28K
D
P38ED17
35K50K65K
277U
Series
Ballast
Lamp/ Wattage
Input Voltage
6" Vertical Architectural HousingHID Metal Halide
No BallastElectronic Ballast
PAR30MH 39W/ 70W
2800K
Color Temperature
120V
PAR38MH 70WED17 70W/ 100W
3500K5000K6500K
277V120-277V
A B C D E F
6" Architectural Vertical HID Metal Halide Housing
Mounting
Reflector
Ballast
Thermal Protector
Socket Cup
Junction Box
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar, wood joist bar hanger and EMT ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available ¾ Optional painted white flange is available
¾ High power factor electronic HID metal halide ballast ¾ 120V or 277V input voltage at 50/60Hz ¾ High power factor ¾ Harmonic distortion<15% ¾ Thermally protected ¾ Minimum ballast temp=-15℃ ¾ Sound rated A
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots and strain clamps
¾ Provided with removable access plates ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ 39/70W PAR30MH ¾ 70/100W PAR38MH ¾ 39/50/70/100W ED17 ¾ Color Temperature: 2800K-6500K
Listing
Socket
¾ ETL listed for damp location W/Feed through
¾ E26 medium base
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
43www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
RV6002
RC608 RC166
RC6026 inch Vertical ReflectorSelf Flanged/White Ring
6 inch Vertical Cross BladeWhite Ring
6 inch Vertical Reflector with Drop GlassSelf Flanged
6 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC6036 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV6126 inch Vertical Reflector with BaffleWhite Ring
44 www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
ORDER MATRIX Example: AM6R-VA
A
E
B
C
AM6R-VA
E
P30
28K
D
P38ED17
35K50K65K
277U
Series
Ballast
Lamp/ Wattage
Input Voltage
6" Vertical Architectural Remodel HousingHID Metal Halide
No BallastElectronic Ballast
PAR30MH 39W/ 70W
2800K
Color Temperature
120V
PAR38MH 70WED17 70W/ 100W
3500K5000K6500K
277V120-277V
A B C D E
6" Architectural Vertical HID Metal Halide Remodel Housing
Mounting
Reflector
Ballast
Thermal Protector
Socket Cup
Junction Box
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available ¾ Optional painted white flange is available
¾ High power factor electronic HID metal halide ballast ¾ 120V or 277V input voltage at 50/60Hz ¾ High power factor ¾ Harmonic distortion<15% ¾ Thermally protected ¾ Minimum ballast temp=-15℃ ¾ Sound rated A
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots and strain clamps
¾ Provided with removable access plates ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ 39/70W PAR30MH ¾ 70/100W PAR38MH ¾ 39/50/70/100W ED17 ¾ Color Temperature: 2800K-6500K
Listing
Socket
¾ ETL listed for damp location W/Feed through
¾ E26 medium base
45www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
RV6002
RC608 RC166
RC6026 inch Vertical ReflectorSelf Flanged/White Ring
6 inch Vertical Cross BladeWhite Ring
6 inch Vertical Reflector with Drop GlassSelf Flanged
6 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC6036 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV6126 inch Vertical Reflector with BaffleWhite Ring
46 www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
ORDER MATRIX Example: AM620-VA
A
E
B
C
AM620-VA
E
T6
28K
D
T4.5
35K50K65K
277U
Series
Ballast
Lamp
Input Voltage
6" Vertical Architectural HousingHID Metal Halide
No BallastElectronic Ballast
T6
2800K
Color Temperature
120V
T4.5
3500K5000K6500K
277V120-277V
A B C D E G F
6" Architectural Vertical HID Metal Halide Housing
Mounting
Reflector
Ballast
Thermal Protector
Socket Cup
Junction Box
Lamp & Socket
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar, wood joist bar hanger and EMT ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available ¾ Optional painted white flange is available
¾ High power factor electronic HID metal halide ballast ¾ 120V or 277V input voltage at 50/60Hz ¾ High power factor ¾ Harmonic distortion<15% ¾ Thermally protected ¾ Minimum ballast temp=-15℃ ¾ Sound rated A
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots and strain clamps
¾ Provided with removable access plates ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ T6 G12 Base-20/39/70/100W ¾ T4.5 G8.5 Base-20/39/70W ¾ Color Temperature: 2800K-6500K
Listing ¾ ETL listed for damp location W/Feed through
G
F
C
20
F
39
H
70
C-channel Bar Hanger
20W
Options
Wattage
Flat Bar Hanger
39W
Wood Joist Bar Hanger
70W
47www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
ORDER MATRIX Example: AM8-VA
A
E
B
D
C
AM8-VA
P30P38
ED17
28K35K50K65K
277
E
U
Series
Lamp/ Wattage
Input Voltage
Ballast
8" Vertical Architectural HousingHID Metal Halide
PAR30MH 70WPAR38MH 70W/ 100WED17 100W/ 150W
2800K
Color Temperature
120V
No Ballast
3500K5000K6500K
277V
Electronic Ballast
120-277V
A B C D E F
8" Architectural Vertical HID Metal Halide Housing
Mounting
Reflector
Ballast
Thermal Protector
Socket Cup
Junction Box
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar, wood joist bar hanger and EMT ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available ¾ Optional painted white flange is available
¾ High power factor electronic HID metal halide ballast ¾ 120V or 277V input voltage at 50/60Hz ¾ High power factor ¾ Harmonic distortion<15% ¾ Thermally protected ¾ Minimum ballast temp=-15℃ ¾ Sound rated A
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots and strain clamps
¾ Provided with removable access plates ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ 39/70W PAR30MH ¾ 70/100W PAR38MH ¾ 39/50/70/100/150W ED17 ¾ Color Temperature: 2800K-6500K
Listing
Socket
¾ ETL listed for damp location W/Feed through
¾ E26 medium base
F
CFH
C-channel Bar Hanger
Options
Flat Bar HangerWood Joist Bar Hanger
48 www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
RV8002
RC808 RC188
RC8028 inch Vertical ReflectorSelf Flanged/White Ring
8 inch Vertical Cross BladeWhite Ring
8 inch Vertical Reflector with Drop GlassSelf Flanged
8 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC8038 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV8128 inch Vertical Reflector with BaffleWhite Ring
49www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
ORDER MATRIX Example: AM8R-VA
A
E
B
D
C
AM8R-VA
P30P38
ED17
28K35K50K65K
277
E
U
Series
Lamp/ Wattage
Input Voltage
Ballast
8" Vertical Architectural Remodel HousingHID Metal Halide
PAR30MH 70WPAR38MH 70W/ 100WED17 100W/ 150W
2800K
Color Temperature
120V
No Ballast
3500K5000K6500K
277V
Electronic Ballast
120-277V
A B C D E
8" Architectural Vertical HID Metal Halide Remodel Housing
Mounting
Reflector
Ballast
Thermal Protector
Socket Cup
Junction Box
Lamp
¾ Constructed from 16-gauge steel, die-formed construction for max heat dissipation and rust protection
¾ Precision tooled springs secure trim to mounting frame for effortless and tool-less installation ¾ Compatible with C-channel, flat bar, wood joist bar hanger and EMT ¾ Fully assembled for ease of installation ¾ Non-IC housing require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture
¾ High quality reflector with 1.2mm thickness available ¾ Optional painted white flange is available
¾ High power factor electronic HID metal halide ballast ¾ 120V or 277V input voltage at 50/60Hz ¾ High power factor ¾ Harmonic distortion<15% ¾ Thermally protected ¾ Minimum ballast temp=-15℃ ¾ Sound rated A
¾ Meet ETL requirements ¾ Standard thermal protection device guards against improper installation, over lamping and misuse of insulation material
¾ External thermal device located on the junction box wrap
¾ Adjusts vertically for optimum light performance ¾ Die-cast fin construction for heat dissipation ¾ Unitized optics guarantees proper trim to housing installation ¾ Tool-less installation adjustability from either outside the housing or inside the housing
¾ Pre-wired junction box provided with 1/2" and 3/4" knockouts, romex knockouts with pry-out slots and strain clamps
¾ Provided with removable access plates ¾ All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
¾ Through branch circuit wiring (4 in, 4 out)
¾ 39/70W PAR30MH ¾ 70/100W PAR38MH ¾ 39/50/70/100/150W ED17 ¾ Color Temperature: 2800K-6500K
Listing
Socket
¾ ETL listed for damp location W/Feed through
¾ E26 medium base
50 www.liteharbor.com
ARCHITECTURAL HID METAL HALIDE
RV8002
RC808 RC188
RC8028 inch Vertical ReflectorSelf Flanged/White Ring
8 inch Vertical Cross BladeWhite Ring
8 inch Vertical Reflector with Drop GlassSelf Flanged
8 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC8038 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV8128 inch Vertical Reflector with BaffleWhite Ring
52 www.liteharbor.com
COMMERCIAL HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A6-VC
AF6-VC
6" Vertical LED Commercial Recessed HousingLamp: PAR30 LED 18W Max.
6" Vertical Compact Fluorescent Commercial Recessed HousingLamp: 13/18/26/32/42W DTT/ TRT
RV6002
RC608 RC166
RC6026 inch Vertical ReflectorSelf Flanged/White Ring
6 inch Vertical Cross BladeWhite Ring
6 inch Vertical Reflector with Drop GlassSelf Flanged
6 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC6036 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
RV6126 inch Vertical Reflector with BaffleWhite Ring
53www.liteharbor.com
COMMERCIAL HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
RH6002
RCH166
6 inch Horizontal ReflectorSelf Flanged/White Ring
6 inch Horizontal Reflector with Drop GlassSelf Flanged
RC6136 inch Horizontal Baffle with Regressed LensWhite Ring
RC6116 inch Horizontal Reflector with BaffleWhite Ring
RC6146 inch Horizontal Cross BladeWhite Ring
RC6126 inch Horizontal Reflector with Regressed LensSelf Flanged/White Ring
AF6-HC
AF6-CE-HC
6" Horizontal Compact Fluorescent Commercial Recessed HousingLamp: 13/18/26W DTT; 32/42W TRT; 2x13/18/26W DTT
6" Horizontal Compact Fluorescent Commercial Recessed HousingLamp: 13/18/26 DTT; 32W TRT; 2x13/18/26W DTT
54 www.liteharbor.com
COMMERCIAL HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
RC710
RC713
RC7116" Shallow Horizontal Reflector
6" Shallow Horizontal Baffle with Regressed Lens
6" Shallow Horizontal Clear Reflector with Baffle
RC7126" Shallow Horizontal Reflector with Regressed Lens
RC7146" Shallow Horizontal Cross Blade
AF6S-HC 6" Shallow Horizontal Compact Fluorescent Commercial Recessed HousingLamp: 13/18/26W DTT; 32W TRT; 2x13/18/26W DTT
55www.liteharbor.com
COMMERCIAL HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A8-VC
AF8-VC
8" Vertical LED Commercial Recessed HousingLamp: PAR30/PAR38 LED 24W Max.
8" Vertical Compact Fluorescent Commercial Recessed HousingLamp: 13/18/26W DTT/TRT; 32/42W DTT
RV8002
RC188
8 inch Vertical ReflectorSelf Flanged/White Ring
RC8088 inch Vertical Cross BladeWhite Ring
RV8128 inch Vertical Reflector with BaffleWhite Ring
8 inch Vertical Reflector with Drop GlassSelf Flanged
RC8028 inch Vertical Reflector with Regressed LensSelf Flanged/White Ring
RC8038 inch Vertical Baffle with Regressed LensSelf Flanged/White Ring
56 www.liteharbor.com
COMMERCIAL HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
RH8002
RCH188
8 inch Horizontal ReflectorSelf Flanged/White Ring
8 inch Horizontal Reflector with Drop GlassSelf Flanged
RC8138 inch Horizontal Baffle with Regressed LensWhite Ring
RC8118 inch Horizontal Reflector with BaffleWhite Ring
RC8148 inch Horizontal Cross BladeWhite Ring
RC8128 inch Horizontal Reflector with Regressed LensSelf Flanged/White Ring
AF8-HC 8" Horizontal Compact Fluorescent Commercial Recessed HousingLamp: 26W DTT; 32/42W TRT; 2x13/18/26W DTT; 2x32/42W TRT
58 www.liteharbor.com
LED RETROFIT
ORDER MATRIX Example: BWL4001 Description
Driver
LED Light Engine
Listing & Warranty
¾ All-in-one LED retrofit wall washer trim designed to use with Liteharbor 4 inch recessed residential downlight
¾ Provide 50000 hours of life at 70% lumen maintenance ¾ No lead or mercury ¾ Trim shipped with a medium base socket adapter whip
¾ Dedicated 120 volt driver ¾ Power factor >0.9 ¾ Dimmable to 10% with most brand dimmers ¾ Rated for 50 to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 3000K-5000K ¾ Rated for 50000 hours at 70% lumen output
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
A
F
B
E
C
BWL4001
CreeCitizenEpistar
SeoulOsram
600
30K
D
U
800
DM
40K50K
277
Series
LED Available
Lumen Output
Dimmable
Input Voltage
4" LED Downlight Wall Washer
CreeCitizenEpistarSeoulOsram
600 Lumen
Non-Dimmable
3000K
Color Temperature
120V
120-277V
800 Lumen
Dimmable
4000K5000K
277V
A B C D F E
4" LED Downlight Wall Washer Retrofit
59www.liteharbor.com
LED RETROFIT
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
ORDER MATRIX Example: BWL6001 Description
Driver
LED Light Engine
Listing & Warranty
¾ All-in-one LED retrofit wall washer trim designed to use with Liteharbor 6 inch recessed residential downlight
¾ Provide 50000 hours of life at 70% lumen maintenance ¾ No lead or mercury ¾ Trim shipped with a medium base socket adapter whip
¾ Dedicated 120 volt driver ¾ Power factor >0.9 ¾ Dimmable to 10% with most brand dimmers ¾ Rated for 50 to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 3000K-5000K ¾ Rated for 50000 hours at 70% lumen output
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
A
F
E
BWL6001
900
30K
1200
40K50K
Series
Lumen Output
6" LED Downlight Wall Washer
900 Lumen
3000K
Color Temperature
1200 Lumen
4000K5000K
A B C D FE
6" LED Downlight Wall Washer Retrofit
60 www.liteharbor.com
LED RETROFIT
4" LED Downlight Eyeball Retrofit
Description
Driver
LED Light Engine
Listing & Warranty
¾ All-in-one LED retrofit eyeball trim designed to use with Liteharbor 4 inch recessed residential downlight
¾ Allows for 30° vertical adjustment ¾ Provide 50000 hours of life at 70% lumen maintenance ¾ No lead or mercury ¾ Trim shipped with a medium base socket adapter whip
¾ Dedicated 120 volt driver ¾ Power factor >0.9 ¾ Dimmable to 10% with most brand dimmers ¾ Rated for 50 to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 3000K-5000K ¾ Rated for 50000 hours at 70% lumen output
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: BEL4001
A
F
E
BEL4001
600
30K
800
40K50K
Series
Lumen Output
4" LED Downlight Eyeball
600 Lumen
3000K
Color Temperature
800 Lumen
4000K5000K
A B C D F E
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
61www.liteharbor.com
LED RETROFIT
Description
Driver
LED Light Engine
Listing & Warranty
¾ All-in-one LED retrofit eyeball trim designed to use with Liteharbor 6 inch recessed residential downlight
¾ Allows for 30° vertical adjustment ¾ Provide 50000 hours of life at 70% lumen maintenance ¾ No lead or mercury ¾ Trim shipped with a medium base socket adapter whip
¾ Dedicated 120 volt driver ¾ Power factor >0.9 ¾ Dimmable to 10% with most brand dimmers ¾ Rated for 50 to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 3000K-5000K ¾ Rated for 50000 hours at 70% lumen output
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: BEL6001
A
F
E
BEL6001
900
30K
1200
40K50K
Series
Lumen Output
6" LED Downlight Eyeball
900 Lumen
3000K
Color Temperature
1200 Lumen
4000K5000K
A B C D FE
6" LED Downlight Eyeball Retrofit
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
62 www.liteharbor.com
LED RETROFIT
4" LED Downlight Module Retrofit
Description
Wattage
Driver
LED Light Engine
Listing & Warranty
¾ All-in-one LED retrofit trim designed to use with Liteharbor 4 inch recessed residential downlights ¾ Provide 50000 hours of life at 70% lumen maintenance ¾ No lead or mercury ¾ Trim shipped with a medium base socket adapter whip ¾ Available with dedicated Emergency Battery Back-up
¾ Input Power: 10W -12W (+/- 5%) ¾ Lumens: 600LM-800LM
¾ Dedicated 120 volt driver ¾ Power factor >0.9 ¾ Dimmable to 10% with most brand dimmers ¾ Rated for 50 to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature 2700K-5000K ¾ Rated for 50000 hours at 70% lumen output
¾ ETL listed to US and Canadian standards for wet locations ¾ 5 Year Limited Warranty
ORDER MATRIX Example: BL4001
A
F
E
BL4001
600
27K
800
40K50K
Series
Lumen Output
4" LED Downlight Module
600 Lumen
2700K
Color Temperature
800 Lumen
4000K5000K
A B C D F E
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
63www.liteharbor.com
LED RETROFIT
4" LED Downlight Module Retrofit
Description
Driver
LED Light Engine
Listing & Warranty
¾ All-in-one LED retrofit trim designed to use with Liteharbor 4 inch recessed residential downlight ¾ Provide 50000 hours of life at 70% lumen maintenance ¾ No lead or mercury ¾ Trim shipped with a medium base socket adapter whip ¾ Available with dedicated Emergency Battery Back-up
¾ Dedicated 120 volt driver ¾ Power factor >0.9 ¾ Dimmable to 10% with most brand dimmers ¾ Rated for 50 to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 3000K-5000K ¾ Rated for 50000 hours at 70% lumen output
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: BL4002
A
F
E
BL4002
600
30K
800
40K50K
Series
Lumen Output
4" LED Downlight Module
600 Lumen
3000K
Color Temperature
800 Lumen
4000K5000K
A B C D F E
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
64 www.liteharbor.com
LED RETROFIT
120V LED Low Profile Surface Recessed Disk Light
Description
This Fixture Can Be Surface Mounted Or Recessed Mounted
Technical Specifications
¾ 120V LED disk light provides surface mount light for most construction. ¾ It fits most 4 inch junction boxes and can replace 5 inch and 6 inch recessed can lights to eliminate baffles.
¾ And it it suitable for use in dry, damp locations indoor/outdoor enclosed applications.
¾ Before installation, please set two screws in the junction box and do not drive screws to the end of junction box.
¾ Plug the white wire from the junction box to the driver white wire connector and plug the black wire to the black wire connector of the driver.
¾ Then attach the disk light to the junction box. Plug the grounding wire to the ground connector of the driver.
¾ Then use screw driver to drive the screw to the end and make the disk light tightly fix on the junction box.
¾ Finally twist diffuser on the disk light metal enclosure and lock the diffuser in place.
¾ Make sure to release E26 lamp base inside can to be replaced by UL listed E26 base adapter and find white and black plug from E26 base adapter.
¾ To use wire plug to connect white socket of the LED driver. And connect driver grounding wire in the can grounding screw.
¾ Then squeeze the springs of LED disk light to be inserted into the can and it can be done one by one for both sides.
¾ To make sure to hook them on the disk light should be pushed on to the surface of the can to make sure that the disk light is attached to the ceiling surface.
¾ And then twist the diffuser, which should be locked in the disk metal enclosure and keep the diffuser in place of the disk light surface.
¾ 120V 60Hz AC operation ¾ 15W 36pcs LED chips ¾ Light source lumens: 1250; Fixture lumens: 1050 ¾ Translucent white PC opal diffuser ¾ Two mounting screws ¾ Philips screw driver sold separately ¾ 2-Year limited warranty
D=5.9"/7.4"H=1.26"
Steps For Surface Mounting
Steps For Recessed Mounting
ORDER MATRIX Example: BL4003
A
F
E
BL4003
1050
30K
1250
40K50K
Series
Lumen Output
LED Recessed Disk Light
1050 Lumen
3000K
Color Temperature
1250 Lumen
4000K5000K
A B C D F E
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
65www.liteharbor.com
LED RETROFIT
Description
Driver
LED Light Engine
Listing & Warranty
¾ All-in-one LED retrofit trim designed to use with Liteharbor 6 inch recessed residential downlight ¾ Provide 50000 hours of life at 70% lumen maintenance ¾ No lead or mercury ¾ Trim shipped with a medium base socket adapter whip ¾ Available with dedicated Emergency Battery Back-up
¾ Dedicated 120 volt driver ¾ Power factor >0.9 ¾ Dimmable to 10% with most brand dimmers ¾ Rated for 50 to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 2700K-5000K ¾ Rated for 50000 hours at 70% lumen output
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: BL6001
A
F
E
BL6001
900
27K
1200
40K50K
Series
Lumen Output
6" LED Downlight Module
900 Lumen
2700K
Color Temperature
1200 Lumen
4000K5000K
A B C D FE
6" LED Downlight Module Retrofit
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
66 www.liteharbor.com
LED RETROFIT
4" LED Downlight Directional Gimbal Retrofit
Description
Driver
LED Light Engine
Listing & Warranty
¾ All-in-one LED retrofit gimbal trim designed to use with Liteharbor 4 inch recessed residential downlight
¾ Allows for swivels 30° and rotates 355° adjustment ¾ Provide 50000 hours of life at 70% lumen maintenance ¾ No lead or mercury ¾ Trim shipped with a medium base socket adapter whip ¾ Available with dedicated Emergency Battery Back-up
¾ Dedicated 120 volt driver ¾ Power factor >0.9 ¾ Dimmable to 10% with most brand dimmers ¾ Rated for 50 to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature: 2700K-6000K ¾ Rated for 50000 hours at 70% lumen output ¾ No heat, mercury or UV
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: BAL4001
A
F
E
BAL4001
600
27K
800
40K60K
Series
Lumen Output
4" LED Downlight Directional Gimbal
600 Lumen
2700K
Color Temperature
800 Lumen
4000K6000K
A B C D F E
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
67www.liteharbor.com
LED RETROFIT
4" LED Downlight Square Retrofit
ORDER MATRIX Example: BSL4001
A
F
E
BSL4001
600
27K
800
40K50K
Series
Lumen Output
4" LED Downlight Square
600 Lumen
2700K
Color Temperature
800 Lumen
4000K5000K
A B C D F E
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
Description
Wattage
Driver
LED Light Engine
Listing & Warranty
¾ All-in-one LED retrofit trim designed to use with Liteharbor 4 inch recessed residential downlights ¾ Provide 50000 hours of life at 70% lumen maintenance ¾ No lead or mercury ¾ Trim shipped with a medium base socket adapter whip ¾ Available with dedicated Emergency Battery Back-up
¾ Input Power: 10W -12W (+/- 5%) ¾ Lumens: 600LM-800LM
¾ Dedicated 120 volt driver ¾ Power factor >0.9 ¾ Dimmable to 10% with most brand dimmers ¾ Rated for 50 to 60Hz at 120V/277V input ¾ Produces less than 20% THD
¾ Cree true white® technology available ¾ CRI>80% ¾ Color temperature 2700K-5000K ¾ Rated for 50000 hours at 70% lumen output
¾ ETL listed to US and Canadian standards for wet locations ¾ 5 Year Limited Warranty
68 www.liteharbor.com
LED RETROFIT
4" LED Downlight Square Retrofit
Description
LED Light Engine
Listing & Warranty
¾ With over 1,800 color, trim, and lighting options, the four-part Easy to install and provides you with a fully customizable designer look at an affordable price.
¾ Neodymium magnets make it possible to swap in different light engine, reflector, and trim elements — no tools required.
¾ 650LM/ 800LM, comparable light output to 60W/ 75W halogen lamp ¾ The LEDs offer energy efficiency with an average life of 50000 hours.
¾ Cree true white® technology available ¾ CRI>90% ¾ Color temperature: 2700K-6000K ¾ Rated for 50000 hours at 70% lumen output
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: BSL4002
A
F
E
BSL4002
600
27K
800
40K60K
Shown With White Light Engine, Round Reflector And Round Trim
Shown With White Light Engine, Square Reflector And Square Trim
Series
Lumen Output
4" LED Downlight Square
600 Lumen
2700K
Color Temperature
800 Lumen
4000K6000K
A B C D F E
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
69www.liteharbor.com
LED RETROFIT
Description
LED Module
Features
Reflector
Listing & Warranty
Mounting
¾ Eco-friendly no lead or mercury ¾ Compatible with Liteharbor 4 inch recessed downlight ¾ Designed to last a minimum 50,000 hours at L70 ¾ Dimmable to 10% with most brand dimmers
¾ 700 lumen LED ¾ With integral power supply ¾ Module lumen output: 950 lm ¾ CRI: 80+ ¾ CCT: 3000K-5000K
¾ 950 lumen LED ¾ With integral power supply ¾ Module lumen output: 950 lm ¾ CRI: 80+ ¾ CCT: 3000K-5000K
¾ Deep set LED for superior glare and cut-off ¾ Cree True White® technology ¾ Comprehensive solution with driver electronics, optics and core thermals ¾ Versatile form factor for small-aperture designs
¾ Reflector is designed to gather the light scattered by the led chip and shape it into functional beams that minimize brightness and glare while eliminating lamp image
¾ Reflector is high quality available in clear, semi diffuse or white finish. Self flange trim is standard.
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
¾ Spring clips safely secure LED trim and module to housing.
ORDER MATRIX
ORDER MATRIX
Example: BRL4001-SF
A
A
F
B
E
C
BRL4001-SF
SFSFW
700
CR
30K
CL
WH
950
SB
40K50K
HZ
Series
Trim
Lumen Output
Lens Type
Reflector Finish
4" LED Downlight Deep Reflector
Self FlangedSelf Flanged White
700 Lumen
Clear Tempered
3000K
Color Temperature
Clear
White
950 Lumen
Sand Blasted
4000K5000K
Haze
A
A
B
B
C
C
D F E
4" LED Downlight Deep Reflector Retrofit
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
70 www.liteharbor.com
LED RETROFIT
6" LED Downlight Deep Reflector Retrofit
Description
Features
LED Module
Reflector
Mounting
Listing & Warranty
¾ Eco-friendly no lead or mercury ¾ Compatible with Liteharbor 6 inch recessed downlight ¾ Designed to last a minimum 50,000 hours at L70 ¾ Dimmable to 10% with most brand dimmers
¾ Deep set LED for superior glare and cut-off ¾ Cree True White® technology ¾ Comprehensive solution with driver electronics, optics and core thermals ¾ Versatile form factor for small-aperture designs
¾ 1400 lumen LED ¾ With integral power supply ¾ Module lumen output: 1400 lm ¾ CRI: 80+ ¾ CCT: 3000K-5000K
¾ 1100 lumen LED ¾ With integral power supply ¾ Module lumen output: 1100 lm ¾ CRI: 80+ ¾ CCT: 3000K-5000K
¾ Reflector is designed to gather the light scattered by the led chip and shape it into functional beams that minimize brightness and glare while eliminating lamp image
¾ Reflector is high quality available in clear, semi diffuse or white finish. Self flange trim is standard.
¾ Torsion spring safely secure LED trim and module to housing.
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
ORDER MATRIX
ORDER MATRIX
Example: BRL6001-SF
A
A
F
B
E
C
BRL6001-SF
SFSFW
1100
CR
30K
CL
WH
1400
SB
40K50K
HZ
Series
Trim
Lumen Output
Lens Type
Reflector Finish
6" LED Downlight Deep Reflector
Self FlangedSelf Flanged White
1100 Lumen
Clear Tempered
3000K
Color Temperature
Clear
White
1400 Lumen
Sand Blasted
4000K5000K
Haze
A
A
B
B
C
C
D FE
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
71www.liteharbor.com
LED RETROFIT
4" LED Downlight Shallow Reflector Retrofit
Description
LED Module
Features
Reflector
Listing & Warranty
Mounting
¾ Eco-friendly no lead or mercury ¾ Compatible with Liteharbor 4 inch recessed downlight ¾ Designed to last a minimum 50,000 hours at L70 ¾ Dimmable to 10% with most brand dimmers
¾ Deep set LED for superior glare and cut-off ¾ Cree True White® technology ¾ Comprehensive solution with driver electronics, optics and core thermals ¾ Versatile form factor for small-aperture designs
¾ Reflector is designed to gather the light scattered by the led chip and shape it into functional beams that minimize brightness and glare while eliminating lamp image
¾ Reflector is high quality available in clear, semi diffuse or white finish. Self flange trim is standard.
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
¾ Spring clips safely secure LED trim and module to housing.
ORDER MATRIX
ORDER MATRIX
Example: BRL4002-SF
A
A
F
B
E
C
BRL4002-SF
SFSFW
700
CR
30K
CL
WH
950
SB
40K50K
HZ
Series
Trim
Lumen Output
Lens Type
Reflector Finish
4" LED Downlight Shallow Reflector
Self FlangedSelf Flanged White
700 Lumen
Clear Tempered
3000K
Color Temperature
Clear
White
950 Lumen
Sand Blasted
4000K5000K
Haze
A
A
B
B
C
C
D F E
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
¾ 700 lumen LED ¾ With integral power supply ¾ Module lumen output: 950 lm ¾ CRI: 80+ ¾ CCT: 3000K-5000K
¾ 950 lumen LED ¾ With integral power supply ¾ Module lumen output: 950 lm ¾ CRI: 80+ ¾ CCT: 3000K-5000K
72 www.liteharbor.com
LED RETROFIT
6" LED Downlight Shallow Reflector Retrofit
Description
Features
LED Module
Reflector
Mounting
Listing & Warranty
¾ Eco-friendly no lead or mercury ¾ Compatible with Liteharbor 6 inch recessed downlight ¾ Designed to last a minimum 50,000 hours at L70 ¾ Dimmable to 10% with most brand dimmers
¾ Deep set LED for superior glare and cut-off ¾ Cree True White® technology ¾ Comprehensive solution with driver electronics, optics and core thermals ¾ Versatile form factor for small-aperture designs
¾ 1400 lumen LED ¾ With integral power supply ¾ Module lumen output: 1400 lm ¾ CRI: 80+ ¾ CCT: 3000K-5000K
¾ 1100 lumen LED ¾ With integral power supply ¾ Module lumen output: 1100 lm ¾ CRI: 80+ ¾ CCT: 3000K-5000K
¾ Reflector is designed to gather the light scattered by the led chip and shape it into functional beams that minimize brightness and glare while eliminating lamp image
¾ Reflector is high quality available in clear, semi diffuse or white finish. Self flange trim is standard.
¾ Torsion spring safely secure LED trim and module to housing.
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
ORDER MATRIX
ORDER MATRIX
Example: BRL6002-SF
A
A
F
B
E
C
BRL6002-SF
SFSFW
1100
CR
30K
CL
WH
1400
SB
40K50K
HZ
Series
Trim
Lumen Output
Lens Type
Reflector Finish
6" LED Downlight Shallow Reflector
Self FlangedSelf Flanged White
1100 Lumen
Clear Tempered
3000K
Color Temperature
Clear
White
1400 Lumen
Sand Blasted
4000K5000K
Haze
A
A
B
B
C
C
D FE
B
C
CreeCitizenEpistar
SeoulOsram
D
U
DM
277
LED Available
Dimmable
Input Voltage
CreeCitizenEpistarSeoulOsram
Non-Dimmable
120V
120-277V
Dimmable
277V
74 www.liteharbor.com
LED RECESSED HOUSING
4" New Construction LED Recessed Downlight
4" Remodel LED Recessed Downlight
Housing
Housing
Junction Box
Thermal Protection
Hanger Bar
Junction Box
Connection
Connection
Air-Shut
Listing & Warranty
Listing & Warranty
Thermal Protector
¾ Die-formed aluminum for maximum heat dissipation and rust protection ¾ Housing adjusts to 1/2" to 1 3/8" ceiling thickness. Trims are held in place with high tension clips
¾ Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications.
¾ Die-formed aluminum for maximum heat dissipation and rust protection ¾ Housing adjusts to 1/2" to 1 3/8" ceiling thickness. Trims are held in place with high tension clips
¾ Designed for remodel installations and suitable for use in non-insulation covered ceilings or where insulation can be kept 3” from housing
¾ ETL listed for through branch wiring ¾ 1/2" and 3/4" romex wiring knockouts and four romex knockouts with integral strain clamps, all knockouts have true pry-out slots
¾ J-Box is designed for straight through conduit runs ¾ Removable access plates for easy installation
¾ Standard thermal protection device guards against improper installation and misuse of insulation material
¾ Allow housing to be positioned and locked at any point within a 24" joist span. ¾ Can be shortened for 12" joists ¾ Contain integral nail ¾ Hanger fit onto T-bar spline for quick alignment
¾ ETL listed for through branch wiring ¾ 1/2" and 3/4" romex wiring knockouts and four romex knockouts with integral strain clamps, all knockouts have true pry-out slots
¾ J-Box is designed for straight through conduit runs ¾ Removable access plates for easy installation
¾ Polarity-specific EZ-connect system engineered to match with Module LED trims. Meets strict code requirements where Edison Base Sockets have been banned.
¾ Polarity-specific EZ-connect system engineered to match with Module LED trims. Meets strict code requirements where Edison Base Sockets have been banned.
¾ Provided with gasket to prevent airflow from heated or air-conditioned spaces. Meets or exceeds all national air flow requirements.
¾ ETL listed to US and Canada standards for wet locations ¾ 5-year limited warranty
¾ ETL listed to US and Canada standards for wet locations ¾ 5-year limited warranty
¾ Standard thermal protection device guards against improper installation and misuse of insulation material
AL4-IA
AL4-R
75www.liteharbor.com
LED RECESSED HOUSING
6" New Construction LED Recessed Downlight
6" Remodel LED Recessed Downlight
Housing
Housing
Junction Box
Thermal Protection
Hanger Bar
Junction Box
Connection
Connection
Air-Shut
Listing & Warranty
Listing & Warranty
Thermal Protector
Air-Shut
¾ Die-formed aluminum for maximum heat dissipation and rust protection ¾ Housing adjusts to 1/2" to 1 3/8" ceiling thickness. Trims are held in place with high tension clips
¾ Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications.
¾ Die-formed aluminum for maximum heat dissipation and rust protection ¾ Housing adjusts to 1/2" to 1 3/8" ceiling thickness. Trims are held in place with high tension clips
¾ Housing is IC rated for direct contact with insulation and can be used in IC and NON-IC applications.
¾ ETL listed for through branch wiring ¾ 1/2" and 3/4" romex wiring knockouts and four romex knockouts with integral strain clamps, all knockouts have true pry-out slots
¾ J-Box is designed for straight through conduit runs ¾ Removable access plates for easy installation
¾ Standard thermal protection device guards against improper installation and misuse of insulation material
¾ Allow housing to be positioned and locked at any point within a 24" joist span. ¾ Can be shortened for 12" joists ¾ Contain integral nail ¾ Hanger fit onto T-bar spline for quick alignment
¾ ETL listed for through branch wiring ¾ 1/2" and 3/4" romex wiring knockouts and four romex knockouts with integral strain clamps, all knockouts have true pry-out slots
¾ J-Box is designed for straight through conduit runs ¾ Removable access plates for easy installation
¾ Polarity-specific EZ-connect system engineered to match with Module LED trims. Meets strict code requirements where Edison Base Sockets have been banned.
¾ Polarity-specific EZ-connect system engineered to match with Module LED trims. Meets strict code requirements where Edison Base Sockets have been banned.
¾ Provided with gasket to prevent airflow from heated or air-conditioned spaces. Meets or exceeds all national air flow requirements.
¾ ETL listed to US and Canada standards for wet locations ¾ 5-year limited warranty
¾ ETL listed to US and Canada standards for wet locations ¾ 5-year limited warranty
¾ Standard thermal protection device guards against improper installation and misuse of insulation material
¾ Provided with gasket to prevent airflow from heated or air-conditioned spaces. Meets or exceeds all national air flow requirements.
AL6-IA
AL6-RIA
76 www.liteharbor.com
3" RECESSED HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (2 in-2 out or 4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
A3
A3-R
A3-R2
3" Line Voltage New Construction NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
3" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
3" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
77www.liteharbor.com
3" RECESSED HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (2 in-2 out or 4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
A3-RD
A3-RJ
A3-R2-04
3" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
3" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
3" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
78 www.liteharbor.com
3 " RECESSED HOUSING
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (2 in-2 out or 4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A3-IA 3" Line Voltage New Construction Airtight IC Rated Recessed HousingLamp: LED 8W max. (See trim for max wattage)
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (2 in-2 out or 4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A3-RCG 3" Line Voltage Remodel NON-IC Recessed Housing (Canadian style)Lamp: LED 8W max. (See trim for max wattage)
79www.liteharbor.com
3 " RECESSED TRIM
3" Baffle TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3" Reflector TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3" Shower Trim with Frosted LensLamp: MR16 LED GU5.3 6W Max. GU10 LED GU10 6W Max. PAR16 LED E26 6W Max. Gasket used to prevent moisture Wet location listed
3" Square Gimbal TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
B3001 B30023" Wall Washer TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
B3006
3" Gimbal Ring TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
B30073" Gimbal TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3" Square Baffle TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
B3008
BS30013" Square TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3" Square Reflector TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
B3011 BS3002
B3802
BS3007
Black Matte
Champagne
BK
CP
Polished Brass
Grey
Polished BrassPB
GR
PB
Grey
Black Matte
GR
BK
ORDER MATRIX Example: B3001-WH
A
B
C
B3XXX
Series
Ring Finish
Baffle/Reflector Finish
3 Inch Trim
White Matte
Clear
WH
CL
Satin Nickel
Black Shining
SN
BSBlack Shining
White Matte
BS
WH
Mocha
Satin Nickel
MochaMO
SN
MO
White Shining
Haze
WS
HZ
Chrome
Oil Rubbed Brown
CH
ORBOil Rubbed Brown
White Shining
ORB
WS
Golden
Chrome
GoldenGL
CH
GL
A B C
80 www.liteharbor.com
3.5" RECESSED HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
A35
A35-R
A35-R2
3.5" Line Voltage New Construction NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
3.5" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
3.5" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
81www.liteharbor.com
3.5" RECESSED HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A35-R2-04 3.5" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (2 in-2 out or 4 in -4 out), five 1/2" knockouts and four romex knockouts with adjustable clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
A35-RD
A35-RJ
3.5” Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
3.5" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
82 www.liteharbor.com
3.5" RECESSED HOUSING
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (2 in-2 out or 4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
A35-IA
A35-RCG
3.5" Line Voltage New Construction Airtight IC Rated Recessed HousingLamp: LED 8W max. (See trim for max wattage)
3.5" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 8W max. (See trim for max wattage)
83www.liteharbor.com
3.5" RECESSED TRIM
3.5" Baffle TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3.5" Reflector TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3.5" Eyeball TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3.5" Square Baffle TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3.5" Pinhole TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3.5" Reflector Adjustable TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3.5" Slot TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3.5" Large Gimbal TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3.5" Square Baffle TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max
3.5" Shower Trim with Dome LensLamp: MR16 LED GU5.3 6W Max. GU10 LED GU10 6W Max. PAR16 LED E26 6W Max. Gasket used to prevent moisture Wet location listed
3.5" Square Reflector TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
3.5" Shower Trim with Frosted LensLamp: MR16 LED GU5.3 6W Max. GU10 LED GU10 6W Max. PAR16 LED E26 6W Max. Gasket used to prevent moisture Wet location listed
3.5" Square Gimbal TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
B35001 B35002 B35003
B35011
B35014 B35024B35005
B35071
BS35001
B35602
BS35002
B35802
BS35007
Black Matte
Champagne
BK
CP
Polished Brass
Grey
Polished BrassPB
GR
PB
Grey
Black Matte
GR
BK
ORDER MATRIX Example: B35001-WH
A
B
C
B35XXX
Series
Ring Finish
Baffle/Reflector Finish
3.5 Inch Trim
White Matte
Clear
WH
CL
Satin Nickel
Black Shining
SN
BSBlack Shining
White Matte
BS
WH
Mocha
Satin Nickel
MochaMO
SN
MO
White Shining
Haze
WS
HZ
Chrome
Oil Rubbed Brown
CH
ORBOil Rubbed Brown
White Shining
ORB
WS
Golden
Chrome
GoldenGL
CH
GL
A B C
84 www.liteharbor.com
4" RECESSED HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
A4
A4-R
A4-R2
4” Line Voltage New Construction NON-IC Recessed HousingLamp: LED 10W max. (See trim for max wattage)
4” Line Voltage Remodel NON-IC Recessed HousingLamp: LED 10W max. (See trim for max wattage)
4” Line Voltage Remodel NON-IC Recessed Housing (Canadian style)Lamp: LED 10W max. (See trim for max wattage)
85www.liteharbor.com
4" RECESSED HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (2 in-2 out or 4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
A4-RD
A4-R2-04
4" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 10W max. (See trim for max wattage)
4" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 10W max. (See trim for max wattage)
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A4-RJ 4" Line Voltage Remodel NON-IC Recessed HousingLamp:LED 10W max. (See trim for max wattage)
86 www.liteharbor.com
4" RECESSED HOUSING
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A4-IA 4" Line Voltage New Construction Airtight IC Rated Recessed HousingLamp: LED 10W max. (See trim for max wattage)
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (2 in-2 out or 4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A4-RCG 4" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 10W max. (See trim for max wattage)
87www.liteharbor.com
4 " RECESSED TRIM
4" Shower Baffle Trim with Fresnel LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Reflector Trim with Fresnel LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
B4301
B4302
4" Shower Reflector Trim with Sand Blasted LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Baffle Trim with Sand Blasted LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
B4402
B44014" Shower Trim with Frosted LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
B4400
4" Large Gimbal TrimLamp: R20/PAR20 LED E26 10W Max.
B40074" Gimbal TrimLamp: R20/PAR20 LED E26 10W Max.
B4012
4" Shower Reflector Trim with Dome LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Reflector Trim with Drop OpalLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Baffle Trim with Drop OpalLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Baffle Trim with Frosted Lens Clear in CentreLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Baffle Trim with Dome LensLamp: : R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Reflector Trim with Frosted Lens Clear in CentreLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
B4602
B4502B4501
B4701B4601
B4702 B48014" Shower Baffle Trim With Frosted LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Baffle TrimLamp: R20/PAR20 LED E26 10W Max.
4" Reflector TrimLamp: R20/PAR20 LED E26 10W Max.
4" Eyeball TrimLamp: R20/PAR20 LED E26 10W Max.
B4001 B4002 B4003
4" Pinhole TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4004
4" Baffle TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
4" Reflector TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
4" Eyeball TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4001
BD4002 BD4003
88 www.liteharbor.com
4 " RECESSED TRIM
4" Pinhole Reflector TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD40244" Accent Angle Cut Reflector TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4022
4" Shower Baffle Trim with AlbaliteLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Reflector Trim with Drop opalLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Baffle Trim with Fresnel LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Reflector Trim with AlbaliteLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Reflector Trim with Fresnel LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Baffle Trim with Drop opalLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
BD4401
BD4502
BD4301
BD4402
BD4302
BD4501
4" Wall Washer Reflector Trim with Spread Lens40° AdjustmentLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
BD4326
4" Wall Wash Trim with ReflectorLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD40264" Slot Trim with ReflectorLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4025
4" Large Pinhole TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
4" Slot Baffle TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
4" Wall Wash TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
4" Large Gimbal Ring TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4014 BD4015
BD4016
BD4007L4" Gimbal TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD40124" Large Regress Rotating Eyeball TrimLamp:MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
4" Retractable TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4009
BD4010
4" Large Pinhole TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
4" Slot TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4004L BD40054" Gimbal Ring TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4007
89www.liteharbor.com
4 " RECESSED TRIM
4" Shower Baffle Trim with Frosted Lens Clear in Centre Lamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Reflector Trim with Frosted LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Baffle Trim with Dome LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Reflector Trim with Frosted Lens Clear in CentreLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Reflector Trim with Dome LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Shower Baffle Trim with Frosted LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
BD4701
BD4802
BD4601
BD4702
BD4602
BD4801
4" Clear Reflector Trim with Drop GlassLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
BD4902
4" Square Reflector Trim with Albalite LensLamp: R20/PAR20 LED E26 10W Max. Gasket used to prevent moisture Wet location listed
4" Square Shower Baffle Trim with Frosted LensLamp: R20/PAR20 LED E26 10W Max. Gasket used to prevent moisture Wet location listed
4" Square Shower Baffle Trim with Frosted Lens Clear in CentreLamp: R20/PAR20 LED E26 10W Max. Gasket used to prevent moisture Wet location listed
4" Square Shower Reflector Trim with Frosted LensLamp: R20/PAR20 LED E26 10W Max. Gasket used to prevent moisture Wet location listed
BS4402
BS4801
BS4701
BS4802
BS4401
BS4702
4" Square Shower Baffle Trim with Albalite LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Square Shower Reflector Trim with Frosted Lens Clear in CentreLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Square Baffle TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4011
4" Square Baffle TrimLamp: R20/PAR20 LED E26 10W Max.
B4011
4" Square Baffle TrimLamp: R20/PAR20 LED E26 10W Max.
4" Square Shower Baffle Trim with Fresnel LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Square Shower Reflector Trim with Fresnel LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Square Reflector TrimLamp: R20/PAR20 LED E26 10W Max.
BS4001
BS4301
BS4002
BS4302
B4802
BS4007
4" Shower Reflector Trim With Frosted LensLamp: R20/PAR20 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Square Gimbal TrimLamp: R20/PAR20 LED E26 8W Max.
90 www.liteharbor.com
4 " RECESSED TRIM
4" Square Shower Reflector Trim with Frosted LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
BDS4802
Black Matte
Champagne
BK
CP
Polished Brass
Grey
Polished BrassPB
GR
PB
Grey
Black Matte
GR
BK
ORDER MATRIX Example: B4001-WH
A
B
C
B4XXX
Series
Ring Finish
Baffle/Reflector Finish
4 Inch Trim
White Matte
Clear
WH
CL
Satin Nickel
Black Shining
SN
BSBlack Shining
White Matte
BS
WH
Mocha
Satin Nickel
MochaMO
SN
MO
White Shining
Haze
WS
HZ
Chrome
Oil Rubbed Brown
CH
ORBOil Rubbed Brown
White Shining
ORB
WS
Golden
Chrome
GoldenGL
CH
GL
A B C
4" Square Shower Baffle Trim with Frosted LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
BDS48014" Square Shower Reflector Trim with Frosted Lens Clear in CentreLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
BDS4702
4" Square Reflector Trim with Fresnel LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Square Shower Baffle Trim with Frosted Lens Clear in CentreLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Square Shower Baffle Trim with Fresnel LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
4" Square Shower Reflector Trim with Albalite LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
BDS4302
BDS4701
BDS4301
BDS4402
4" Square Gimbal TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
4" Square Shower Baffle Trim with Albalite LensLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max. Gasket used to prevent moisture Wet location listed
BDS4007
BDS4401
4" Square Reflector TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
4" Square Baffle TrimLamp: MR16 LED GU5.3 8W Max. GU10 LED GU10 8W Max. PAR16 LED E26 8W Max.
BDS4002BDS40014" Square Retractable TrimLamp: MR16 LED GU5.3 10W Max. GU10 LED GU10 10W Max. PAR16 LED E26 10W Max.
BD4017
91www.liteharbor.com
4 " RECESSED HOUSING COMPACT FLUORESCENT
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
AF4
AF4-R
AF4-IA 4" Compact Fluorescent New Construction Airtight IC Rated Recessed HousingLamp: Electronic Ballast 120/277V 13W/18W 4-Pin TRT
4" Compact Fluorescent Remodel NON-IC Recessed HousingLamp: Electronic Ballast 120/277V 13W/18W/26w 4-Pin TRT
4" Compact Fluorescent New Construction NON-IC Recessed HousingLamp: Electronic Ballast 120/277V 13W/18W/26w 4-Pin TRT
92 www.liteharbor.com
4 " RECESSED HOUSING COMPACT FLUORESCENT
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
AF4D-IA
4" Fluorescent Wall Washer TrimLamp: 1X13/18/26W TRT
4" Fluorescent Shower Trim With Drop OpalLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Reflector TrimLamp: 1X13/18/26W TRT
4" Fluorescent Shower Trim With Fresnel LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Dome LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Albalite LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Frosted Clear In Centre LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Frosted LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
BF4026
BF4502
BF4002 BF4302
BF4602BF4402
BF4702 BF4802
4" Compact Fluorescent New Construction Airtight IC Rated Recessed HousingLamp: Electronic Ballast 120/277V 26W Max 4-Pin Triple Tube
4" Fluorescent Wall Washer TrimLamp: 1X13/18/26W TRT
4" Fluorescent Shower Trim With Drop OpalLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Reflector Trim Lamp: 1X13/18/26W TRT
4" Fluorescent Shower Trim With Fresnel LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Dome LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Albalite LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Baffle TrimLamp: 1X13/18/26W TRT
BF4026M
BF4502M
BF4002M BF4302M
BF4602MBF4402M
BF4001M
93www.liteharbor.com
4" RECESSED TRIM
4" Fluorescent Shower Trim With Frosted Clear In Centre LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Frosted LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
BF4702M BF4802M
4" Fluorescent Shower Trim With Albalite LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Frosted Clear In Centre Clear Incentre LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Drop OpalLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Dome LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Shower Trim With Frosted LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
BF4402S
BF4702SBF4502S BF4602S
BF4802S
4" Fluorescent Shower Trim With Fresnel LensLamp: 1X13/18W TRT Gasket used to prevent moisture Wet location listed
4" Fluorescent Wall Washer TrimLamp: 1X13/18/26W TRT
4" Fluorescent Reflector TrimLamp: 1X13/18/26W TRT
BF4302SBF4026S
BF4002S
ChampagneCP
Grey
Polished Brass
GR
PB
Black MatteBK
ORDER MATRIX Example: BF4001-WH
A B
BF4XXX
Series Baffle/Reflector Finish
4 Inch Trim ClearCL
Black ShiningBS
White MatteWH
Satin Nickel
Mocha
SN
MO
Haze HZ
Oil Rubbed BrownORB
White ShiningWS
Chrome
Golden
CH
GL
A B
94 www.liteharbor.com
5" RECESSED HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
A5
A5-R
A5-IA
5" Line Voltage New Construction NON-IC Recessed HousingLamp: LED 18W max. (See trim for max wattage)
5" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 18W max. (See trim for max wattage)
5" Line Voltage New Construction Airtight IC Rated Recessed HousingLamp: LED 18W max. (See trim for max wattage)
95www.liteharbor.com
5" RECESSED HOUSING
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A5-RIA 5" Line Voltage Remodel Airtight IC Rated Recessed HousingLamp: LED 18W max. (See trim for max wattage)
96 www.liteharbor.com
5" RECESSED TRIM
5" Shower Trim with Fresnel LensLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
5" Shower Trim with Dome LensLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
5" Shower Trim with Frosted LensLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
5" Shower Trim with Albalite lensLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
5" Shower Trim with Centre Frosted LensLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
5" Shower Trim with Drop OpalLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
B5300
B5602 B5800
B5400
B5700
B5500
5" Baffle TrimLamp: R30/PAR30 LED E26 18W Max.
5" Eyeball TrimLamp: R30/PAR30 LED E26 18W Max.
5" Reflector TrimLamp: R30/PAR30 LED E26 18W Max.
5" Large Eyeball TrimLamp: R30/PAR30 LED E26 18W Max.
5" Cone Baffle TrimLamp: A19 LED E26 12W Max.
5" Gimbal Ring TrimLamp: R30/PAR30 LED E26 18W Max.
5" Baffle TrimLamp: R30/PAR30 LED E26 18W Max.
5" Clear Reflector Trim with BaffleLamp: A19 LED E26 12W Max.
B5001 B5003B5002
B5003L B5011B5007
B5011K B50215" Cone Reflector TrimLamp: A19 LED E26 12W Max.
B5022
Black Matte
Champagne
BK
CP
Polished Brass
Grey
Polished BrassPB
GR
PB
Grey
Black Matte
GR
BK
ORDER MATRIX Example: B5001-WH
A
B
C
B5XXX
Series
Ring Finish
Baffle/Reflector Finish
5 Inch Trim
White Matte
Clear
WH
CL
Satin Nickel
Black Shining
SN
BSBlack Shining
White Matte
BS
WH
Mocha
Satin Nickel
MochaMO
SN
MO
White Shining
Haze
WS
HZ
Chrome
Oil Rubbed Brown
CH
ORBOil Rubbed Brown
White Shining
ORB
WS
Golden
Chrome
GoldenGL
CH
GL
A B C
97www.liteharbor.com
5" RECESSED HOUSING COMPACT FLUORESCENT
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
AF5
AF5-R
AF5-IA
5" Compact Fluorescent New Construction NON-IC Recessed HousingLamp: Electronic Ballast 120/277V 13W/18W/26W 4-Pin TRT
5" Compact Fluorescent Remodel NON-IC Recessed HousingLamp: Electronic Ballast 120/277V 13W/18W/26W 4-Pin TRT
5" Compact Fluorescent New Construction Airtight IC Rated Recessed HousingLamp: Electronic Ballast 120/277V 13W/18W 4-Pin TRT
98 www.liteharbor.com
5" RECESSED HOUSING COMPACT FLUORESCENT
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
AF5-RIA 5" Compact Fluorescent Remodel Airtight IC Rated Recessed HousingLamp: Electronic Ballast 120/277V 13W/18W 4-Pin TRT
99www.liteharbor.com
4 " RECESSED TRIM
5" Clear Reflector Trim with BaffleLamp: 13/18/26W TRT
5" Shower Trim with Dome LensLamp: 13/18W TRT Gasket used to prevent moisture. Wet location listed
5" Cone Reflector TrimLamp: 13/18/26W TRT
5" Shower Trim with Centre Frosted LensLamp: 13/18W TRT Gasket used to prevent moisture. Wet location listed
5" Shower Trim with Frosted LensLamp: 13/18W TRT Gasket used to prevent moisture. Wet location listed
5" Shower Trim with Fresnel LensLamp:13/18W TRT Gasket used to prevent moisture. Wet location listed
B5021
B5600
B5022
B5700 B5800
B5300
5" Shower Trim with Albalite lensLamp: 13/18W TRT Gasket used to prevent moisture. Wet location listed
5" Shower Trim with Drop OpalLamp: 13/18W TRT Gasket used to prevent moisture. Wet location listed
B5400 B5500
ChampagneCP
Grey
Polished Brass
GR
PB
Black MatteBK
ORDER MATRIX Example: B5001-WH
A B
B5XXX
Series Baffle/Reflector Finish
5 Inch Trim ClearCL
Black ShiningBS
White MatteWH
Satin Nickel
Mocha
SN
MO
Haze HZ
Oil Rubbed BrownORB
White ShiningWS
Chrome
Golden
CH
GL
A B
100 www.liteharbor.com
6" RECESSED HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
A6
A6-R
A6-IA
6" Line Voltage New Construction NON-IC Recessed HousingLamp: LED 24W max. (See trim for max wattage)
6" Line Voltage Remodel NON-IC Recessed HousingLamp: LED 24W max. (See trim for max wattage)
6" Line Voltage New Construction Airtight IC Rated Recessed HousingLamp: LED 24W max. (See trim for max wattage)
101www.liteharbor.com
6" RECESSED HOUSING
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
A6-RIA
A6-S
A6-SR
6" Line Voltage Remodel Airtight IC Rated Recessed HousingLamp: LED 24W max. (See trim for max wattage)
6" Line Voltage New Construction NON-IC Shallow Recessed HousingLamp: LED 24W max. (See trim for max wattage)
6" Line Voltage Remodel NON-IC Shallow Recessed HousingLamp: LED 24W max. (See trim for max wattage)
102 www.liteharbor.com
6" RECESSED HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
A6-SIA
A6-SRIA
6" Line Voltage New Construction Airtight IC Rated Shallow Recessed HousingLamp: LED 24W max. (See trim for max wattage)
6" Line Voltage Remodel IC Rated Shallow Recessed HousingLamp: LED 24W max. (See trim for max wattage)
103www.liteharbor.com
6" RECESSED TRIM
6" Eyeball Baffle TrimLamp: R30/PAR30 LED E26 18W Max.
6" Reflector TrimLamp: R40/PAR38 LED E26 24W Max.
6" Wall Wash Baffle TrimLamp: R30/PAR30 LED E26 18W Max.
6" PAR38 Gimbal Ring TrimLamp: R40/PAR38 LED E26 24W Max.
6" Eyeball and Baffle TrimLamp: R30/PAR30 LED E26 18W Max.
6" Eyeball TrimLamp: R30/PAR30 LED E26 18W Max.
6" Wall Wash Reflector TrimLamp: R30/PAR30 LED E26 18W Max.
6" Cone Baffle TrimLamp: A19 LED E26 12W Max.
6" Gimbal Ring Trim with BaffleLamp: R30/PAR30 LED E26 18W Max.
6" Gimbal Ring TrimLamp: R30/PAR30 LED E26 18W Max.
6" Reflector and Baffle TrimLamp: A19 LED E26 12W Max.
6” Adjustable Gimbal Trim with BaffleLamp: R40/PAR38 LED E26 24W Max.
B6003BB6002L
B6016
B6007L
B6013
B6003
B6026
B6011
B6017
B6007
B6012
B6017L
6" Baffle TrimLamp: R30/PAR30 LED E26 18W Max.
6" Reflector TrimLamp: R30/PAR30 LED E26 18W Max.
6” Baffle TrimLamp: R40/PAR38 LED E26 24W Max.
B6001 B6002B6001L
6" Cone Reflector TrimLamp: A19 LED E26 12W Max.
6" Shower Trim with Albalite LensLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
6" Shower Trim with Fresnel LensLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
B6022
B6400B6300
6” Full Reflector TrimLamp: A19 LED E26 12W Max.
B6012W
6” PAR38 Baffle TrimLamp: R40/PAR38 LED E26 24W Max.
6” PAR30 Baffle TrimLamp: R30/PAR30 LED E26 18W Max.
B6021LB6021
104 www.liteharbor.com
6" RECESSED TRIM
Black Matte
Champagne
BK
CP
Polished Brass
Grey
Polished BrassPB
GR
PB
Grey
Black Matte
GR
BK
ORDER MATRIX Example: B6001-WH
A
B
C
B6XXX
Series
Ring Finish
Baffle/Reflector Finish
6 Inch Trim
White Matte
Clear
WH
CL
Satin Nickel
Black Shining
SN
BSBlack Shining
White Matte
BS
WH
Mocha
Satin Nickel
MochaMO
SN
MO
White Shining
Haze
WS
HZ
Chrome
Oil Rubbed Brown
CH
ORBOil Rubbed Brown
White Shining
ORB
WS
Golden
Chrome
GoldenGL
CH
GL
A B C
6” Shower with Frosted LensLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
B68006" Shower Trim with Centre Frosted LensLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
6" Shower Trim with Drop OpalLamp: A19 LED E26 12W Max. Gasket used to prevent moisture Wet location listed
B6700B6500
105www.liteharbor.com
6" RECESSED SLOPE HOUSING
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
A6-PR
A6-PIA
6" Line Voltage Remodel NON-IC Slope Recessed HousingLamp: LED 18W max. (See trim for max wattage)
6" Line Voltage New Construction Airtight IC Rated Slope Recessed HousingLamp: LED 18W max. (See trim for max wattage)
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A6-P 6" Line Voltage New Construction NON-IC Slope Recessed HousingLamp: LED 18W max. (See trim for max wattage)
106 www.liteharbor.com
6" RECESSED SLOPE HOUSING
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
A6-PRIA 6" Line Voltage Remodel Airtight IC Rated Slope Recessed HousingLamp: LED 18W max. (See trim for max wattage)
6” Slope Trim With BaffleLamp: R30/PAR30 LED E26 18W Max.
6” Slope Trim With ReflectorLamp: R30/PAR30 LED E26 18W Max.
BP6001 BP6002
ChampagneCP
Grey
Polished Brass
GR
PB
Black MatteBK
ORDER MATRIX Example: BP6001-WH
A B
BP6XXX
Series Baffle/Reflector Finish
6 Inch Trim ClearCL
Black ShiningBS
White MatteWH
Satin Nickel
Mocha
SN
MO
Haze HZ
Oil Rubbed BrownORB
White ShiningWS
Chrome
Golden
CH
GL
A B
107www.liteharbor.com
6" RECESSED HOUSING COMPACT FLUORESCENT
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Housing Must be kept at least 3” away from insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
Description
Description
AF6
AF6-R
AF6-IA
6" Compact Fluorescent New Construction NON-IC Recessed HousingLamp: Electronic Ballast 18W/26W/32W 4-Pin 120/277V
6" Compact Fluorescent Remodel NON-IC Recessed HousingLamp: Electronic Ballast 18W/26W/32W 4-Pin 120/277V
6" Compact Fluorescent New Construction Airtight IC Rated Recessed HousingLamp: Electronic Ballast 13W/18W/26W 4-Pin 120/277V
108 www.liteharbor.com
6" Recessed Housing Compact Fluorescent
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
AF6-RIA 6" Compact Fluorescent Remodel Airtight IC Rated Recessed HousingLamp: Electronic Ballast 13W/18W/26W 4-Pin 120/277V
109www.liteharbor.com
6" RECESSED TRIM
6" Full Reflector Baffle Cone TrimLamp: 18/26/32W TRT
6" Cone Trim With ReflectorLamp: 18/26/32W TRT
6" Clear Reflector With BaffleLamp: 18/26/32W TRT
6" Full Reflector TrimLamp: 18/26/32W TRT
6" Shower Trim With Albalite LensLamp: 13/18/26W TRT Gasket used to prevent moisture Wet location listed
6" Clear Specular Reflector With Drop GlassLamp: 13/18/26W TRT Gasket used to prevent moisture Wet location listed
6" Shower Trim With Fresnel LensLamp: 13/18/26W TRT Gasket used to prevent moisture Wet location listed
6” Shower Trim With Sand Blasted LensLamp: 13/18/26W TRT Gasket used to prevent moisture Wet location listed
6” Shower Trim With Drop Opal LensLamp: 13/18/26W TRT Gasket used to prevent moisture Wet location listed
6” Shower Trim With Frosted Spot LensLamp: 13/18/26W TRT Gasket used to prevent moisture Wet location listed
B6011
B6022
B6012 B6012W
BF6402
BF6512
BF6302
BF6800
BF6502 BF6702
ChampagneCP
Grey
Polished Brass
GR
PB
Black MatteBK
ORDER MATRIX Example: B6011-WH
A B
B6XXX
Series Baffle/Reflector Finish
6 Inch Trim ClearCL
Black ShiningBS
White MatteWH
Satin Nickel
Mocha
SN
MO
Haze HZ
Oil Rubbed BrownORB
White ShiningWS
Chrome
Golden
CH
GL
A B
110 www.liteharbor.com
6" Recessed Housing Compact Fluorescent
¾ Designed for direct contact with insulation ¾ Can be installed in 1/2" to 1-3/8" thick ceilings ¾ Includes adjustable hanger bars with integral nail ¾ J-Box listed for through-branch circuit wiring (4 in-4 out), five 1/2" knockouts and four romex knockouts with strain clamps
¾ ETL listed for damp location W/Feed through
Description
AF6D-IA 6" Compact Fluorescent New Construction Airtight IC Rated Recessed HousingLamp: Electronic Ballast 32W 4-Pin 120/277V 4-Pin
6 inch Vertical Reflector Self Flanged/White Ring
RV6002
112 www.liteharbor.com
MULTI-LIGHT
E
B
D
T4.5T4
LED
MR16
T6
P20
CDM-Tm
P30AR
L15
M20
M70
27K
C
U
L17.8
M39
30K35K41K
277
Lamp
Light Source & Wattage
Input Voltage
T4.5T4COB LED
MR16
T6
PAR20
CDM-Tm PGJ5
PAR30AR111
LED 15W each lamp
Metal Halide 20W each lamp
Metal Halide 70W each lamp
2700K
Color Temperature
120V
120V-277V
LED 17.8W each lamp
Metal Halide 39W each lamp
3000K3500K4100K
277V
Description
Flanged Trim
Mounting Frame
Housing
Trimless
Technology Data
¾ Easy Installation and maintenance ¾ All parts and components accessible from below the ceiling ¾ Lamp holders are adjustable 360° horizontal and 30° vertical for spot lighting in multiple directions
¾ Actual adjustment may vary depending on the lamp beam spread
¾ Extruded trim frame includes torsion springs for convenient installations or removal from the housing
¾ Can be accommodate a 1/2" to 1 1/4" ceiling thickness ¾ Channel bracket allow up to 5" vertical adjustable ¾ Universal mounting brackets included ¾ Compatible with C-channel, flat bar, and EMT ¾ C-channel are recommended for T-bar ceilings ¾ Bar hangers must be ordered separately
¾ The inner trim is constructed of 22GA steel ¾ Finish can be black, white or silver ¾ Special finish please confirm with factory ¾ Internal wire bundles and locked and covered with a glass sleeve ¾ Junction box can be accessible from below the ceiling with a plate
¾ Optional mud frame available for trimless mounting ¾ The perforated mesh frame provided adheres to joint compound for seamless and trimless mounting
Light Source & Socket Input Volt. Wattage Color Temperature Life Span
LED COB120V277V
120-277V20W Max
2700-4100K
50000h
LED MR16/ GU5.3 12V 8W Max
LED PAR20/ E26
120V277V
120-277V
10W Max
LED PAR30/ E26 18W Max
LED AR111/ G53 33W Max
Metal Halide T4/ GU6.5 39W Max
30000h
Metal Halide T4.5/ G8.5 70W Max
Metal Halide T6/ G12 100W Max
Metal Halide CDM-Tm/ PGJ5 39W Max
Metal Halide MR16MH/ GX10 12V 39W Max
ORDER MATRIX
A
G4011-AG4012-AG4013-AG4014-A
G4014-A-S
Series
1-Lamp2-Lamp3-Lamp4-Lamp4-Lamp
A B C D E
G4011-A G4012-A G4013-A
G4014-A G4014-A-S
Example: G4011-A
113www.liteharbor.com
MULTI-LIGHT COB LED
ORDER MATRIX
A
D
E
B
G4011-B
G4013-BG4012-B
G4014-BG4014-B-S
CreeCitizen
SeoulEpistar
Osram
27K
12°
C
U
30K
24°36°
35K41K
277
Series
LED Available
Input Voltage
1-Lamp
3-Lamp2-Lamp
4-Lamp4-Lamp
CreeCitizen
SeoulEpistar
Osram
2700K
12° spot
Color Temperature
Optics
120V
120V-277V
3000K
24° narrow flood36° flood
3500K4100K
277V
A B C D E
Description
Flanged Trim
Mounting Frame
Housing
LED Light Engine
Electrical System
Trimless
¾ Easy Installation and maintenance ¾ All parts and components accessible from below the ceiling ¾ Lamp holders are adjustable 360° horizontal and 30° vertical for spot lighting in multiple directions ¾ Actual adjustment may vary depending on the lamp beam spread
¾ Extruded trim frame includes torsion springs for convenient installations or removal from the housing
¾ Can be accommodate a 1/2" to 1 1/4" ceiling thickness ¾ Channel bracket allow up to 5" vertical adjustable ¾ Universal mounting brackets included ¾ Compatible with C-channel, flat bar, and EMT ¾ C-channel are recommended for T-bar ceilings ¾ Bar hangers must be ordered separately
¾ The inner trim is constructed of 22GA steel ¾ Finish can be black, white or silver ¾ Special finish please confirm with factory ¾ Internal wire bundles and locked and covered with a glass sleeve ¾ Junction box can be accessible from below the ceiling with a plate
¾ 2700k-4100k ¾ CRI>80% ¾ LED mounted to die-cast/extruded aluminum heat sink ¾ 50000 hours average rated life at 70% lumen
¾ 120-277V input ¾ Class 2 power supply ¾ Over voltage, over current and short circuit protection ¾ Auto recovery ¾ 10% dimmable is available 120V only ¾ 10/15/17.8/20W each lamp ¾ LM from 650-950 each lamp
Lamp Q’ty (PCS) Wattage (W) Lumen (LM) Color Temperature (K)
1 lamp 20W 950LM
2700K-4100K2 lamps 40W 1900LM3 lamps 60W 2850LM4 lamps 80W 3800LM
4 lamps square 80W 3800LM
¾ Optional mud frame available for trimless mounting ¾ The perforated mesh frame provided adheres to joint compound for seamless and trimless mounting
G4011-B G4012-B G4013-B
G4014-B G4014-B-S
Example: G4011-B
114 www.liteharbor.com
MULTI-LIGHT COB LED
ORDER MATRIX
A
D
C
F
G
B
G4011-C
G4013-CG4012-C
G4014-C
RGBRGBW
WWCW
30
T
12°
E
U
40
DM
TL
24°36°54°
277
Series
Type
Input Voltage
1-Lamp
3-Lamp2-Lamp
4-Lamp
RGBRGBW
WW=2700KCW=5000K
30W
Non-Dimmable
Trimmed
12° spot
Wattage
Dimmable
Trim
Optics
120V
120-277V
40W
Dimmable
Trimless
24° narrow flood36° flood54° flood
277V
A B C D E G F
Description
Application
¾ RGBW state of the art down light ¾ Compatible with 512 universal controllers in the market ¾ The floating head permits trim adjustable of angles and direction of beam ¾ Imagine creating ANY COLOR your mood desires just by press of a button ¾ Regular lighting/ Reading mode/ Color changing/ Party mode ¾ DMX 512 controller needed. Sold separately
¾ High end residence and Commercial applications ¾ Hotel ¾ Casino ¾ Photo Studio ¾ Art gallery ¾ Film studio ¾ Film set
Technical InfoDMX decoder
512DMX512/1990 Standard 12/24VDC
256 levels 4 channels
LED Driver85~240VAC/12VDC UL Listed
5 years warranty MeanWell/Rico
RGBW Chip
40W RGBW Individually addressable channels9x9mm Extreme Lm densityCOB Low Thermal resistance
Glass lens Level 1 moisture sensitivity
MCPCB Available Compatible with high Uniformity mixing lenses
FIXTURE
Trim-less or trimmed UL/ETL Listed0.5mm thick gauge
Aluminum/steel sheet4“device” compartments for
electrical equipmentHigh grade commercial
brackets Swivel in all directions floating head
1/2”UL standard Knockouts 5-year warrantyCERTIFICATE ETL,UL,CCC,CE,TUV,RoHs,FccWARRANTY 5 Years
Example: G4011-C
115www.liteharbor.com
ADJUSTABLE MULTI-LIGHT COB LED
ORDER MATRIX
A
D
E
B
G4011-D
G4013-DG4012-D
G4014-DG4014-D-S
CreeCitizen
SeoulEpistar
Osram
27K
12°
C
U
30K
24°36°54°
35K41K
277
Series
LED Available
Input Voltage
1-Lamp
3-Lamp2-Lamp
4-Lamp4-Lamp
CreeCitizen
SeoulEpistar
Osram
2700K
12° spot
Color Temperature
Optics
120V
120V-277V
3000K
24° narrow flood36° flood54° flood
3500K4100K
277V
A B C D E
Features
Optics
Electrical
LED Light Engine
Mounting
Trim Assembly
Listing/Warranty
Housing
¾ Fixtures are available in one to four lamps ¾ Each LED can independently 360° rotation and up to 90° horizontal adjustment ¾ No harmful ultraviolet or infrared wavelengths ¾ No lead or mercury ¾ 50000 hours average rated life at 70% output
¾ 12° spot, 24° narrow flood, 36° flood and 54° wide flood
¾ Dimmable 120V ¾ Frequency 50-60Hz ¾ Electrical constant current LED driver ¾ Thermal protection guard protects the LED module from overheating and will dim LED module if necessary.
¾ Power factor >95% ¾ Multiple dimming options available
¾ High output led arrays provide outstanding reliability, performance and color quality. ¾ 2700K/3000K/3500K/4100K white phosphor high performance ¾ CRI>80% ¾ LED mounted to die-cast aluminum heat sink
¾ Can accommodate to 1” thick ceiling thickness ¾ Supplied with butterfly brackets to allow up-to 3” vertical adjustment ¾ Compatible with C-channel, flat bar, wood joist bar and EMT ¾ Bar hangers must be ordered separately ¾ C-channel are recommended for T-bar ceilings
¾ Includes integral power supply for each individual head ¾ Quick connection supplied for easy installation and wiring to frame-in ¾ Ease of installation and maintenance with access to power supply
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-year limited warranty
Lamp Q’ty Wattage Lumen 1 lamp 14W 1022LM2 lamps 28W 2044LM3 lamps 42W 3066LM4 lamps 56W 4088LM
¾ Heavy gauge cold rolled steel with white or black finish ¾ Universal housing design installs in suspended grid, plaster or drywall ¾ Drivers are accessible from above and below ceiling ¾ Light engine and driver can be upgraded to accommodate future technology improvements ¾ Equipped with quick connect to trim assembly for easy installation.
G4011-D G4012-D G4013-D
G4014-D G4014-D-S
Example: G4011-D
116 www.liteharbor.com
RESIDENTIAL MULTIPLE DOWNLIGHT
ORDER MATRIX
A
D
B
G4011-EG4012-EG4013-E
CreeCitizen
SeoulEpistar
Osram
28K
C
U
30K35K41K60K
277
Series
Available Chips
Input Voltage
1-lamp2-lamp3-lamp
CreeCitizen
SeoulEpistar
Osram
2800K
Color Temperature
120V
120V-277V
3000K3500K4100K6000K
277V
A B C D
Description
Mounting
Construction
Features
Dimming
Light Source
¾ Mini LED Multiple Spots for remodeling and new construction applications for residential and commercial environments. The Multiple Spots are marketed as complete units including the housing and trim. Available as one, two and three-light configurations, each spot is individually adjustable and provides a 30-degree visual cutoff for glare control.
¾ Supplied with 4 ways hanger bar, adjustable from 14½"-25" to accommodate various joist construction and grid sizes. Hanger bars include a captive mounting "screw-nail" for ease installation. Can be accommodate a 1/2" to 1 1/4" ceiling thickness.
¾ Die-cast aluminum heat sink painted black. Trim and housing are constructed of Gauge Steel.
¾ Individually adjustable luminaries ¾ Complete unit includes housing & trim ¾ All housings are Non-IC rated ¾ 30° vertical tilt, 360° horizontal rotation
¾ Dimmable to 10% with most brand dimmers.
Input Voltage AC 120V/277V 50/60Hz Rated Power 8W/Lamp
Luminous Efficiency 70 LM/WLamp GU10
Socket GU10Color Temperature 2800-6000K
Material Gauge SteelCRI Ra>80
¾ High output GU10 LED
G4011-E G4012-E
G4013-E
Example: G4011-E
117www.liteharbor.com
RESIDENTIAL MULTIPLE DOWNLIGHT
ORDER MATRIX
A
D
B
G4011-FG4012-FG4013-F
28K
U
30K35K41K60K
277
Series
Input Voltage
1-lamp2-lamp3-lamp
2800K
Color Temperature
120V
120V-277V
3000K3500K4100K6000K
277V
A B C D
Description
Junction Box
Construction
Features
Dimming
Light Source
¾ Mini LED Multiple Spots for remodeling and new construction applications for residential and commercial environments. The Multiple Spots are marketed as complete units including the housing and trim (trimless available). Available as one, two and three-light configurations, each spot is individually adjustable and provides a 30-degree visual cutoff for glare control.
¾ Seven knockouts and four Romex (R) style wiring connectors provided for ease of installation. Rated for branch wiring.
¾ Die-cast aluminum heat sink painted black. Trim and housing are constructed of Gauge Steel.
¾ Individually adjustable luminaries ¾ Complete unit includes housing & trim ¾ All housings are Non-IC rated ¾ 30° vertical tilt, 360° horizontal rotation
¾ Dimmable to 10% with most brand dimmers.
Input Voltage AC 120V/277V 50/60Hz Rated Power 8W/Lamp
Luminous Efficiency 70 LM/WLamp GU10
Socket GU10Color Temperature 2800-6000K
Material Gauge SteelCRI Ra>80
¾ High output GU10 LED
G4011-F G4012-F
G4013-F
Example: G4011-F
CreeCitizen
SeoulEpistar
Osram
C Available Chips
CreeCitizen
SeoulEpistar
Osram
119www.liteharbor.com
LED COB TRACK LIGHTING
LED Light Engine:
Electrical System:
Optics:
Dimming:
Compatibility:
Listing & Warranty:
¾ Color Temperature 2700K-6000K ¾ CRI 80+ ¾ 3 Step MacAdam (3 SDMC) ¾ Passive aluminum heat sink ¾ 50,000 hrs average rated life
¾ 120V/277V 50/60Hz input ¾ Over voltage, over current and short circuit protection: Auto recovery ¾ MTBF > 100,000 hours
¾ 16° Spot, 24° Narrow Flood, 32° Flood, and 50° Wide Flood
¾ Track Dimming
¾ Canopy Dimming
– (ELV) reverse phase control dimmers. 120V only. – Dimmable 100 – 10%
– ELV Dimming 120V – 0-10V Dimming 120V or 277V
¾ Track luminaire is designed for use with the following track systems: – Single Circuit/Single Neutral 120V – Two Circuit/Single Neutral 120V – Two Circuit / Two Neutral 120V – Two Circuit / Two Neutral 277V
¾ ETL Listed to US and Canadian standards for dry locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: K3023L
A
E
F
B
PhilipsCree
EpistarSeoul
Osram
K3023L
27K
16°
WH
D
30K
24°
BK
40K
32°
SV
50°
SN
50K60K
Series
LED Available
PhilipsCreeEpistarSeoulOsram
COB Track Lighting (50W)
2700K
16° Spot
White
Color Temperature
Beam Spread
Finish
3000K
24° Narrow Flood
Black
4000K
32° Flood
Silver
50° Wide Flood
Satin Nickel
5000K6000K
A B C D E F
C
ND120
D120ND277
D277
Power Supply
Non-Dimming 120V
0-10V Dimming 120VNon-Dimming 277V
0-10V Dimming 277V
120 www.liteharbor.com
LED COB TRACK LIGHTING
LED Light Engine:
Electrical System:
Optics:
Dimming:
Compatibility:
Listing & Warranty:
¾ Color Temperature 2700K-6000K ¾ CRI 80+ ¾ 3 Step MacAdam (3 SDMC) ¾ Passive aluminum heat sink ¾ 50,000 hrs average rated life
¾ 120V/277V 50/60Hz input ¾ Over voltage, over current and short circuit protection: Auto recovery ¾ MTBF > 100,000 hours
¾ 16° Spot, 24° Narrow Flood, 32° Flood, and 50° Wide Flood
¾ Track Dimming
¾ Canopy Dimming
– (ELV) reverse phase control dimmers. 120V only. – Dimmable 100 – 10%
– ELV Dimming 120V – 0-10V Dimming 120V or 277V
¾ Track luminaire is designed for use with the following track systems: – Single Circuit/Single Neutral 120V – Two Circuit/Single Neutral 120V – Two Circuit / Two Neutral 120V – Two Circuit / Two Neutral 277V
¾ ETL Listed to US and Canadian standards for dry locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: K3023M
A
E
F
B
PhilipsCree
EpistarSeoul
Osram
K3023M
27K
16°
WH
D
30K
24°
BK
40K
32°
SV
50°
SN
50K60K
Series
LED Available
PhilipsCreeEpistarSeoulOsram
COB Track Lighting (32W)
2700K
16° Spot
White
Color Temperature
Beam Spread
Finish
3000K
24° Narrow Flood
Black
4000K
32° Flood
Silver
50° Wide Flood
Satin Nickel
5000K6000K
A B C D E F
C
ND120
D120ND277
D277
Power Supply
Non-Dimming 120V
0-10V Dimming 120VNon-Dimming 277V
0-10V Dimming 277V
121www.liteharbor.com
LED COB TRACK LIGHTING
LED Light Engine:
Electrical System:
Optics:
Dimming:
Compatibility:
Listing & Warranty:
¾ Color Temperature 2700K-6000K ¾ CRI 80+ ¾ 3 Step MacAdam (3 SDMC) ¾ Passive aluminum heat sink ¾ 50,000 hrs average rated life
¾ 120V/277V 50/60Hz input ¾ Over voltage, over current and short circuit protection: Auto recovery ¾ MTBF > 100,000 hours
¾ 16° Spot, 24° Narrow Flood, 32° Flood, and 50° Wide Flood
¾ Track Dimming
¾ Canopy Dimming
– (ELV) reverse phase control dimmers. 120V only. – Dimmable 100 – 10%
– ELV Dimming 120V – 0-10V Dimming 120V or 277V
¾ Track luminaire is designed for use with the following track systems: – Single Circuit/Single Neutral 120V – Two Circuit/Single Neutral 120V – Two Circuit / Two Neutral 120V – Two Circuit / Two Neutral 277V
¾ ETL Listed to US and Canadian standards for dry locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: K3023M2
A
E
F
B
K3023M2
27K
16°
WH
30K
24°
BK
40K
32°
SV
50°
SN
50K60K
Series
COB Track Lighting (64W)
2700K
16° Spot
White
Color Temperature
Beam Spread
Finish
3000K
24° Narrow Flood
Black
4000K
32° Flood
Silver
50° Wide Flood
Satin Nickel
5000K6000K
A B C D E F
C
ND120
D120ND277
D277
Power Supply
Non-Dimming 120V
0-10V Dimming 120VNon-Dimming 277V
0-10V Dimming 277V
PhilipsCree
EpistarSeoul
Osram
D LED Available
PhilipsCreeEpistarSeoulOsram
122 www.liteharbor.com
LED COB TRACK LIGHTING
LED Light Engine:
Electrical System:
Optics:
Dimming:
Compatibility:
Listing & Warranty:
¾ Color Temperature 2700K-6000K ¾ CRI 80+ ¾ 3 Step MacAdam (3 SDMC) ¾ Passive aluminum heat sink ¾ 50,000 hrs average rated life
¾ 120V/277V 50/60Hz input ¾ Over voltage, over current and short circuit protection: Auto recovery ¾ MTBF > 100,000 hours
¾ 16° Spot, 24° Narrow Flood, 32° Flood, and 50° Wide Flood
¾ Track Dimming
¾ Canopy Dimming
– (ELV) reverse phase control dimmers. 120V only. – Dimmable 100 – 10%
– ELV Dimming 120V – 0-10V Dimming 120V or 277V
¾ Track luminaire is designed for use with the following track systems: – Single Circuit/Single Neutral 120V – Two Circuit/Single Neutral 120V – Two Circuit / Two Neutral 120V – Two Circuit / Two Neutral 277V
¾ ETL Listed to US and Canadian standards for dry locations ¾ 5-Year Limited Warranty
ORDER MATRIX Example: K3023S
A
E
F
B
K3023S
27K
16°
WH
30K
24°
BK
40K
32°
SV
50°
SN
50K60K
Series
COB Track Lighting (10W)
2700K
16° Spot
White
Color Temperature
Beam Spread
Finish
3000K
24° Narrow Flood
Black
4000K
32° Flood
Silver
50° Wide Flood
Satin Nickel
5000K6000K
A B C D E F
C
ND120
D120ND277
D277
Power Supply
Non-Dimming 120V
0-10V Dimming 120VNon-Dimming 277V
0-10V Dimming 277V
PhilipsCree
EpistarSeoul
Osram
D LED Available
PhilipsCreeEpistarSeoulOsram
123www.liteharbor.com
LED COB TRACK LIGHTING
LED Light Engine:
Dimming:
Compatibility:
Optics:
Electrical System:
Listing & Warranty:
Mounting:
¾ Color Temperature 2700K-6000K ¾ CRI 80+ ¾ 3 Step MacAdam (3 SDMC) ¾ Passive aluminum heat sink ¾ 50,000 hrs average rated life
¾ Track Dimming
¾ Track luminaire is designed for use with the following track systems:
¾ Canopy Dimming
– (ELV) reverse phase control dimmers. 120V only. – Dimmable 100 – 10%
– Single Circuit/Single Neutral 120V – Two Circuit/Single Neutral 120V – Two Circuit / Two Neutral 120V – Two Circuit / Two Neutral 277V
– ELV Dimming 120V – 0-10V Dimming 120V or 277V
¾ 16° Spot, 24° Narrow Flood, 32° Flood, and 50° Wide Flood
¾ 120V/277V 50/60Hz input ¾ Over voltage, over current and short circuit protection: Auto recovery ¾ MTBF > 100,000 hours
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
¾ Mounts to a standard 4” square or octagon junction box
ORDER MATRIX Example: FM3024
A
F
G
B
E
FM3024
30
27K
16°
WH
32
30K
24°
BK
40K
32°
SV
50°
SN
50K60K
Series
Watt/ Lumen
COB Track Lighting
30W/ 2550LM
3000K
16° Spot
White
Color Temperature
Beam Spread
Finish
32W/ 2720LM
2700K
24° Narrow Flood
Black
4000K
32° Flood
Silver
50° Wide Flood
Satin Nickel
5000K6000K
A B C D E F G
B
ND120
D120ND277
D277
Power Supply
Non-Dimming 120V
0-10V Dimming 120VNon-Dimming 277V
0-10V Dimming 277V
PhilipsCree
EpistarSeoul
Osram
D LED Available
PhilipsCreeEpistarSeoulOsram
124 www.liteharbor.com
LED COB TRACK LIGHTING
LED Light Engine:
Dimming:
Compatibility:
Optics:
Electrical System:
Listing & Warranty:
Mounting:
¾ Color Temperature 2700K-6000K ¾ CRI 80+ ¾ 3 Step MacAdam (3 SDMC) ¾ Passive aluminum heat sink ¾ 50,000 hrs average rated life
¾ Track Dimming
¾ Track luminaire is designed for use with the following track systems:
¾ Canopy Dimming
– (ELV) reverse phase control dimmers. 120V only. – Dimmable 100 – 10%
– Single Circuit/Single Neutral 120V – Two Circuit/Single Neutral 120V – Two Circuit / Two Neutral 120V – Two Circuit / Two Neutral 277V
– ELV Dimming 120V – 0-10V Dimming 120V or 277V
¾ 16° Spot, 24° Narrow Flood, 32° Flood, and 50° Wide Flood
¾ 120V/277V 50/60Hz input ¾ Over voltage, over current and short circuit protection: Auto recovery ¾ MTBF > 100,000 hours
¾ ETL listed to US and Canadian standards for wet locations ¾ 5-Year Limited Warranty
¾ Mounts to a standard 4” square or octagon junction box
ORDER MATRIX Example: FM3024A
A
F
G
B
E
FM3024A
30
27K
16°
WH
32
30K
24°
BK
40K
32°
SV
50°
SN
50K60K
Series
Watt/ Lumen
COB Track Lighting
30W/ 2550LM
3000K
16° Spot
White
Color Temperature
Beam Spread
Finish
32W/ 2720LM
2700K
24° Narrow Flood
Black
4000K
32° Flood
Silver
50° Wide Flood
Satin Nickel
5000K6000K
A B C D E F G
B
ND120
D120ND277
D277
Power Supply
Non-Dimming 120V
0-10V Dimming 120VNon-Dimming 277V
0-10V Dimming 277V
PhilipsCree
EpistarSeoul
Osram
D LED Available
PhilipsCreeEpistarSeoulOsram
125www.liteharbor.com
TRACK LIGHTING LOW VOLTAGE VOLTAGE
Low Volt. Gimbal Track LightComplete with 12V 8W LED Driver
Lamp: LED MR16 12V 8W Max. GU5.3 BaseFinish: White/ Black/ Satin Nickel
Low Volt. Track LightComplete with 12V 8W LED Driver
Lamp: LED MR16 12V 8W Max. GU5.3 BaseFinish: White/ Black/ Satin Nickel
Low Volt. Mesh Shade Track LightComplete with 12V 8W LED Driver
Lamp: LED MR16 12V 8W Max. GU5.3 BaseFinish: White/ Black/ Satin Nickel
Model: K1003 Model: K1013 Model: K1023
Low Voltage Cylinder Track LightComplete with 12V 8W LED Driver
Lamp: LED MR16 12V 8W Max. GU5.3 BaseFinish: White/ Black/ Satin Nickel
Model: K1063Low Volt. Square Track LightComplete with 12V 8W LED Driver
Lamp: LED MR16 12V 8W Max. GU5.3 BaseFinish: White/ Black/ Satin Nickel
Low Volt. Octagon Track LightComplete with 12V 8W LED Driver
Lamp: LED MR16 12V 8W Max. GU5.3 BaseFinish: White/ Black/ Satin Nickel
Low Volt. Bullet Track LightComplete with 12V 8W LED Driver
Lamp: LED MR16 12V 8W Max. GU5.3 BaseFinish: White/ Black/ Satin Nickel
Model: K1103 Model: K1113
Model: K1503Low Volt. Swivel Track LightComplete with 12V 8W LED Driver
Lamp: LED MR16 12V 8W Max. GU5.3 BaseFinish: White/ Black/ Satin Nickel
Model: K1523Low Volt. Bullet Track LightComplete with 12V 8W LED Driver
Lamp: LED MR16 12V 8W Max. GU5.3 BaseFinish: White/ Black/ Satin Nickel
Model: K1533
126 www.liteharbor.com
TRACK LIGHTING LINE VOLTAGE
Line Volt. Gimbal Track Light
Lamp: LED GU10 8W Max. GU10 Base LED PAR16 8W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Line Volt. Gimbal Track Light
Lamp: LED PAR20 10W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2003 Model: K2013Line Volt. Adjustable Track Light
Lamp: LED PAR20 10W Max. E26 Base LED PAR30 18W Max. E26 Base LED PAR38 24W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2023
Line Volt. Gimbal Track Light
Lamp: LED PAR20 10W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2033Line Volt. Gimbal Track Light
Lamp: LED PAR30 18W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Line Volt. Gimbal Track Light
Lamp: LED PAR38 24W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2043 Model: K2053
Line Volt. Mini Cylinder Track Light
Lamp: LED GU10 8W Max. GU10 Base LED PAR16 8W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2063Line Volt. Square Track Light
Lamp: LED GU10 8W Max. GU10 Base LED PAR16 8W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2103Line Volt. Square Track Light 4 Heads
Lamp: LED GU10 8W/Lamp Max. GU10 Base LED PAR16 8W/Lamp Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2103-4C
127www.liteharbor.com
TRACK LIGHTING LINE VOLTAGE
Line Volt. Octagon Track Light
Lamp: LED GU10 8W Max. GU10 Base LED PAR16 8W Max. E26 BaseFinish: White/ Black/ Stain Nickel
Model: K2113Line Volt. Bullet Track Light
Lamp: LED GU10 8W Max. GU10 Base LED PAR16 8W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2503Line Volt. Round Back Track Light
Lamp: LED PAR20 10W Max. E26 BaseFinish: White/ Black
Model: K2553
Line Volt. Round Back Track Light
Lamp: LED PAR30 18W Max. E26 BaseFinish: White/ Black
Model: K2563Line Volt. Round Back Track Light
Lamp: LED PAR38 24W Max. E26 BaseFinish: White/ Black
Model: K2573Line Volt. Step Cylinder Track Light
Lamp: LED PAR20 10W Max. E26 BaseFinish: White/ Black
Model: K2583
Line Volt. Step Cylinder Track Light
Lamp: LED PAR30 18W Max. E26 BaseFinish: White/ Black
Model: K2593Line Volt. Step Cylinder Track Light
Lamp: LED PAR38 24W Max. E26 BaseFinish: White/ Black
Model: K2603Line Volt. Swivel Track Light
Lamp: LED PAR20 10W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2643
128 www.liteharbor.com
TRACK LIGHTING LINE VOLTAGE
Line Volt. Mini Swivel Track Light
Lamp: LED PAR20 10W Max. E26 Base LED PAR30 18W Max. E26 Base LED PAR38 24W Max. E26 BaseFinish: White/ Black
Model: K2653Aluminum Die-casting Track Light
Lamp: LED PAR20 10W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Aluminum Die-casting Track Light
Lamp: LED PAR20 10W/Lamp Max. E26 BaseBar length: 72 inchesFinish: White/ Black/ Satin NickelAvailable Wall Mount and Ceiling Mount
Model: K2663 Model: K2663-6C
Aluminum Die-casting Track Light
Lamp: LED GU10 8W Max. GU10 Base LED PAR16 8W Max. E26 BaseFinish: White/ Black/ Satin Nickel
Model: K2673HID Metal Halide Track Light
120V electronic ballast standardLamp: 39W/ 70W PAR30MH HID Metal HalideFinish: White/ Black/ Satin Nickel
Model: K3003HID Metal Halide Track Light
120V electronic ballast standardLamp: PAR38MH 100W Max. HID Metal HalideFinish: White/ Black/ Satin Nickel
Model: K3013
Flood Wall Wash Track Light
Die-cast construction, specular parabolic louver120V standard electronic ballastLamp: 26W DTT 32/42W TRT LED 18W Max.Finish: White/ Black/ Satin Nickel
Model: K4003Flood Wall Wash Track Light
Specular parabolic louver120V standard electronic ballastLamp: 2×40W TRT LED 2×18W Max.Finish: White/ Black/ Satin Nickel
Model: K4013Flood Wall Wash Track Light
Specular parabolic louver120V standard electronic ballastLamp: 2×32W/42W TRT LED 2×18W Max.Finish: White/ Black/ Satin Nickel
Model: K4023
129www.liteharbor.com
TRACK LIGHTING LINE VOLTAGE
Twin Light Track LightFinish: White/ Black/ Silver/ Satin NickelLamp: LED AR111 1300LM@18W per lamp [email protected] per lamp [email protected] per lampNarrow beam angles, 24° and 40°
Four Barn Doors AR111 Track LightFinish: White/ Black/ Silver/ Satin NickelLamp: LED AR111 1300LM@18W [email protected] [email protected] beam angles, 24° and 40°
Model: KL0011 Model: PR058-AR111-JC-CE
Surface Mouted Four Barn Doors AR111 Track LightFinish: White/ Black/ Silver/ Satin NickelLamp: LED AR111 1300LM@18W [email protected] [email protected] beam angles, 24° and 40°
Model: PR058-AR111-J-CEFour Barn Doors AR70 Track LightFinish: White/ Black/ Silver/ Satin NickelLamp: LED AR70 800LM@10W
PR058-AR70-100-CEFour Barn Doors PAR30 Track LightFinish: White/ Black/ Silver/ Satin NickelLamp: LED PAR30 1440LM@18W
PR058-PAR30-H
360 Degree Rotation Track lightFinish: White/ Black/ Silver/ Satin NickelLamp: LED AR111 1300LM@18W [email protected] [email protected] beam angles, 24° and 40°
Model: KL0010
130 www.liteharbor.com
TRACKING, CONNECTORS AND POWER FEEDS
Single Circuit / Two Circuit TrackSingle circuit track is rated for 2400W and features 12-gauge copper conductors and a separate ground conductor.Two circuit track includes 12-gauge copper conductors and features a double load capacity at 4800W max.Single/ Two Circuit Track is available in white, black, and satin nickel finishes, and in 4, 6, and 8-foot sizes, and can also be field cut to your preference.
Model: K5-3
INDICATES POWER FEED
Global AdaptorFinish: WH/ BK
Single / Two Circuit Live EndFinish: WH/ BK
Single / Two Circuit Flexible ConnectorFinish: WH/ BK
Model: K600 Model: K602Model: K500
131www.liteharbor.com
TRACKING, CONNECTORS AND POWER FEEDS
Single Circuit 90° ConnectorFinish: WH/ BK
Single / Two Circuit X-ConnectorFinish: WH/ BK
Model: K610 Model: K611
Model: K601T-bar Attachment Clips For T-bar Drop CeilingFinish: WH/ BK/ SN
Track End CapFinish: WH/ BK
Single / Two Circuit Conduit End FeedFinish: WH/ BK
Single / Two Circuit Floating CanopyFinish: WH/ BK
Mini CouplingFinish: WH/ BK
Model: K604
Model: K607Single / Two Circuit Live End With Box CoverFinish: WH/ BK
Model: K606
Single / Two Circuit T-ConnectorFinish: WH/ BK
Live End With Cord&PlugFinish: WH/ BKAvailable in 2 wire, 3 wire, 4 wire
Model: K609
Model: K612
Model: K605
Model: K608
133www.liteharbor.com
RUNNING MAN FACEPLATE OPTIONS
001
006
011
016
022
002
007
012
019018
003
008
013
020
004
009
014
017
005
010
015
021
■ LED Running Man Signage Options ■ Customized Service Consult Our Factory
NOTES:
134 www.liteharbor.com
LED EXIT SIGN
Fixture
A
C
D
B
E
F
G
H
Series
Input Volt
Face
Sign
Battery
Housing Color
Letter Color
Arrow
EXL001
277
DF
R
AC
SF
U
WH
RD
RA
BK
GN
LA
BA
Exit sign
120V
Single
Exit
Battery backup
277V
Double
Running Man
AC only
120-277V
White
Red
No
Right
Black
Green
Left
Left and right
Electrical Technology
Light Source
Battery
Mounting
¾ Engineering Grade Thermoplastic Material, ABS housing ¾ UL 94V-0 flame rating ¾ 90 Minute Minimum Emergency Mode ¾ Innovative, snap-together design allows for fast installation ¾ Mounting Hardware Included ¾ Replaceable directional chevron inserts are easily removed and reinserted ¾ Single or double face configuration ¾ Removable directional indicators ¾ Removable front cover for easy installation and battery maintenance ¾ Letters 6" height with 3/4" stroke ¾ Damp Location Rated ¾ UL Number: E472028
¾ 120/277VAC dual voltage operation ¾ Low energy consumption-only 2.0 watts at 120V
¾ LEDs mounted on print circuit board ¾ LED lamps are operating in normal (AC input) and emergency (DC input) modes
¾ AC only, No battery backup ¾ Backup circuit provided for external emergency power source
¾ Universal (wall, side or ceiling) mounting canopy ¾ Secured through a locking clip on the inside
Thermoplastic LED Exit Sign
ORDER MATRIX Example: EXL001
A B C D E G HF
Running Man Available(120-347V)
135www.liteharbor.com
LED EXIT SIGN
B Sign
RExitRunning Man
Edge Lit Exit Sign
A
C
D
E
F
H
G
Series
Input Volt
Face
Battery
Letter Color
Mounting
Arrow
EXL002
277
DF
AC
SF
U
RD
SM
PM
RA
GN
RM
LA
BA
Exit sign
120V
Single
Battery backup
277V
Double
AC only
120-277V
Red
Surface Mount
Pendant Mount
No
Right
Green
Recessed Mount
Left
Left and right
ORDER MATRIX Example: EXL002
A B C D E G HF
Fixture
Electrical Technology
Light Source
Battery
Mounting
¾ Rigid aluminum housing ¾ Etched, clear acrylic edge-lite replaceable panel (content can changed as per customer's design)
¾ Letter 6" height with 3/4" stroke ¾ Single or double face configuration ¾ Removable directional indicators ¾ Removable front cover for easy installation and battery maintenance ¾ 90 Minute Minimum Emergency Mode ¾ Damp Location Rated ¾ UL Number: E472028
¾ 120/277VAC dual voltage operation ¾ Momentary test switch and LED AC-On indicator light ¾ Close Tolerance Electric Circuit, Short circuit proof
¾ A soft and even glow radiates as illumination is provided through the use of the most cutting edge LED technology
¾ LED lamps are operating in normal (AC input) and emergency (DC input) modes
¾ AC only, No battery backup ¾ Backup circuit provided for external emergency power source ¾ 24 hours recharge after 90 minutes discharge
¾ Universal mounting canopy, allowing for end, wall, or ceiling mounts ¾ Ceiling recessed mounting is also available
Running Man Available(120-347V)
136 www.liteharbor.com
LED EXIT SIGN
Fixture
A
C
D
E
F
G
Series
Input Volt
Face
Battery
Housing Color
Letter Color
EXL003
277
DF
AC
SF
U
WH
RD
BK
GN
Exit sign
120V
Single
Battery backup
277V
Double
AC only
120-277V
White
Red
Black
Green
Electrical Technology
Light Source
Battery
Mounting
¾ Super Slim, compact Profile ¾ Premium Die Cast Aluminum Material ¾ Innovative, snap-together design allows for fast installation ¾ Mounting Hardware Included ¾ Snap-out knockouts and chevron directional arrows ¾ Removable directional indicators ¾ Letters 6" height with 3/4" stroke ¾ Damp Location Rated ¾ UL Number: E472028
¾ 120/277VAC dual voltage operation ¾ LED indicator light and push button test switch
¾ LEDs mounted on print circuit board ¾ LED lamps are operating in normal (AC input) and emergency (DC input) modes
¾ AC only, No battery backup ¾ Backup circuit provided for external emergency power source ¾ 24 hours recharge after 90 minutes discharge
¾ Universal (wall, side or ceiling) mounting ¾ Universal knockouts on back plate allow for wall mounting directly to standard J-Box
ORDER MATRIX Example: EXL003
A B C D E GF
Die Cast Aluminum LED Exit Sign
B Sign
RExitRunning Man
Running Man Available(120-347V)
137www.liteharbor.com
LED EXIT SIGN
Wet Location Single Face LED Exit Sign
A
C
D
E
F
Series
Input Volt
Battery
Housing Color
Letter Color
EXL005
277
AC
U
WH
RD
BK
GN
Exit sign
120V
Battery backup
277V
AC only
120-277V
White
Red
Black
Green
ORDER MATRIX Example: EXL005
A B C D E F
Fixture
Electrical Technology
Light Source
Battery
Mounting
¾ Fully gasketed polycarbonate lens and ABS thermoplastic housing ¾ Innovative design allows for fast installation ¾ Knockout directional chevrons ¾ Letters 6" height with 3/4" stroke ¾ Single face configuration only ¾ Wet Location Rated ¾ UL Number: E472028
¾ 120/277VAC dual voltage operation ¾ Low energy consumption-only 2.5 watts at 120V ¾ LED indicator light and push button test switch
¾ LED lamps are operating in normal (AC input) and emergency (DC input) modes ¾ Optional 6V SEALED BEAM lamp heads
¾ AC only, No battery backup ¾ Battery backup, 24 hours recharge after 90 minutes discharge ¾ Low voltage battery disconnection- Preventing deep discharge damage to the battery
¾ Wall, ceiling or end mounting configurations are available
B Sign
RExitRunning Man
Running Man Available(120-347V)
138 www.liteharbor.com
LED EXIT SIGN
LED Exit & Emergency Light
A
C
D
E
F
Series
Input Volt
Face
Battery
Letter Color
EXL009
277
DF
AC
SF
U
RDGN
Exit sign
120V
Single
Battery backup
277V
Double
AC only
120-277V
RedGreen
ORDER MATRIX Example: EXL009
A B C D E F
Fixture
Electrical Technology
Battery
Lamp Date
Warranty
¾ Universal Single or Double Face ¾ Energy Saving LED Lamps ¾ Heavy Duty 20 Gauge Steel Housing ¾ Durable White Powder Coated Finish Other Finish Please Consult Factory ¾ Etched,clear acrylic edge-lite face plate ¾ Universally Surface Mounted, Recessed MountedPendant Mounted All Are Available ¾ Red or Green Letter Colors
¾ Dual Voltage Input 120V-277VAC 60Hz ¾ Solid-State Voltage Limited Charger ¾ Solid-state Switching ¾ Brownout Circuit ¾ Low Voltage Disconnected ¾ Overload/Short Circuit Protection ¾ Test Switch/Power Indicator Light
¾ Sealed Nickel Cadmium (Self-Powered exits only) ¾ Maintenance-Free, Long Life ¾ Full Recharge Time 24 Hours (max) ¾ 3.6V
¾ AC LED: Long Life LED Lamps Provide Uniform Diffused Illumination ¾ 2.5W, AC ¾ DC: LED Lamps ¾ 3W 3.6VDC
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
B Sign
RExitRunning Man
Running Man Available(120-347V)
139www.liteharbor.com
LED EXIT SIGN
LED Exit & Emergency Light
A
C
D
E
F
G
Series
Input Volt
Face
Battery
Letter Color
Arrow
EXL010
277
DF
AC
SF
U
RD
RA
GN
LA
BA
Exit sign
120V
Single
Battery backup
277V
Double
AC only
120-277V
Red
No
Right
Green
Left
Left and Right
ORDER MATRIX Example: EXL010
A B C D E F G
Fixture ¾ Universal Single or Double Face ¾ Energy Saving LED Lamps ¾ Aluminum Housing ¾ Clear Acrylic Face Plate ¾ Direction of Narrow Can Be Done As Customers' Needs ¾ Universally Surface Mounted, Ceiling, Wall or End ¾ Universal J-box Mounting Pattern ¾ Red or Green Letter Colors ¾ Die-cast Canopy Provided
Battery ¾ Sealed Nickel Cadmium (Self-Powered exits only) ¾ Maintenance-Free, Long Life ¾ Full Recharge Time 24 Hours (max) ¾ 3.6V
Electrical Technology ¾ Dual Voltage Input 120-277VAC 60Hz ¾ Solid-State Voltage Limited Charger ¾ Solid-state Switching ¾ Brownout Circuit ¾ Low Voltage Disconnected ¾ Overload/Short Circuit Protection ¾ Test Switch/Power Indicator Light
Code Compliance ¾ UL 924 Listed ¾ Most State and Local Codes
Lamp Date ¾ AC LED: Long Life LED Lamps Provide Uniform Diffused Illumination ¾ 120V, Input: 4.2W, Output: 0.7W, 90 Minutes Emergency Time 0.045A, LM>50 ¾ 277V, Input: 4.2W, Output: 0.7W, 90 Minutes Emergency Time 0.019A, LM>50 ¾ DC: LED Lamps
Warranty ¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
B Sign
RExitRunning Man
Running Man Available(120-347V)
140 www.liteharbor.com
LED EXIT SIGN
ORDER MATRIX Example: EXL011
A B C D E F G
Fixture
A
C
D
E
F
G
Series
Input Volt
Face
Battery
Letter Color
Arrow
EXL011
277
DF
AC
SF
U
RD
RA
GN
LA
BA
Exit sign
120V
Single
Battery backup
277V
Double
AC only
120-277V
Red
No
Right
Green
Left
Left and Right
Electrical Technology
Battery
Code Compliance
Warranty
Lamp Date
¾ Universal Single or Double Face ¾ Energy Saving LED Lamps ¾ Heavy Duty 20 Gauge Steel Housing ¾ Durable White Powder Coated Finish Other Finish Please Consult Factory ¾ Other State Styles Are Also Available ¾ Universally Surface Mounted, Ceiling ,Wall or End ¾ Universal J-box Mounting Pattern ¾ Red or Green Letter Colors
¾ Dual Voltage Input 120-277VAC 60Hz ¾ Solid-State Voltage Limited Charger ¾ Solid-state Switching ¾ Brownout Circuit ¾ Low Voltage Disconnected ¾ Overload/Short Circuit Protection ¾ Test Switch/Power Indicator Light
¾ Sealed Nickel Cadmium (Self-Powered exits only ) ¾ Maintenance-Free, Long Life ¾ Full Recharge Time 24 Hours (max) ¾ 3.6V
¾ UL 924 Listed ¾ Most State and Local Codes
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
¾ AC LED: Long Life LED Lamps Provide Uniform Diffused Illumination ¾ 120V, Input: 7W, Output: 1.8W, 90 Minutes Emergency Time 0.077A, LM>50 ¾ 277V, Input: 7W, Output: 1.8W, 90 Minutes Emergency Time, 0.033A, LM>50 ¾ DC: LED Lamps
LED Exit & Emergency Light
B Sign
RExitRunning Man
Running Man Available(120-347V)
141www.liteharbor.com
LED EXIT SIGN
Recessed Mounted LED Exit & Emergency Light
ORDER MATRIX Example: EXL012
A B C D E F G
A
C
D
E
F
G
Series
Input Volt
Face
Battery
Letter Color
Arrow
EXL012
277
DF
AC
SF
U
RD
RA
GN
LA
BA
Exit sign
120V
Single
Battery backup
277V
Double
AC only
120-277V
Red
No
Right
Green
Left
Left and Right
Fixture
Battery
¾ Universal Single or Double Face ¾ Energy Saving LED Lamps ¾ Aluminum Housing ¾ Clear Acrylic Face Plate ¾ Direction of Narrow Can Be Done As Customers' Needs ¾ Recessed Mounted ¾ Universal J-box Mounting Pattern ¾ Red or Green Letter Colors
¾ Sealed Nickel Cadmium (Self-Powered exits only) ¾ Maintenance-Free, Long Life ¾ Full Recharge Time 24 Hours (max) ¾ 3.6V
Electrical Technology
Code Compliance
Warranty
Lamp Date
¾ Dual Voltage Input 120-277VAC 60Hz ¾ Solid-State Voltage Limited Charger ¾ Solid-state Switching ¾ Brownout Circuit ¾ Low Voltage Disconnected ¾ Overload/Short Circuit Protection ¾ Test Switch/Power Indicator Light
¾ UL 924 Listed ¾ Most State and Local Codes
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
¾ AC LED: Long Life LED Lamps Provide Uniform DiffusedIllumination ¾ 120V, Input:4.2W, Output:0.7W, 90 Minutes Emergency Time, 0.045A, LM>50 ¾ 277V, Input:4.2W, Output:0.7W, 90 Minutes Emergency Time,0.019A, LM>50 ¾ DC: LED Lamps
B Sign
RExitRunning Man
Running Man Available(120-347V)
142 www.liteharbor.com
LED EXIT SIGN
LED Exit & Emergency Light
Fixture
Battery
¾ Universal Single or Double Face ¾ Energy Saving LED Lamps ¾ Heavy Duty 20 Gauge Steel Housing ¾ Durable White Powder Coated Finish Other Finish Please Consult Factory ¾ Other State Styles Are Also Available ¾ Universally Surface Mounted, Ceiling, Wall or End ¾ Universal J-box Mounting Pattern ¾ Red or Green Letter Colors
¾ Sealed Nickel Cadmium (Self-Powered exits only) ¾ Maintenance-Free, Long Life ¾ Full Recharge Time 24 Hours (max) ¾ 3.6V
Electrical Technology
Code Compliance
Warranty
Lamp Date
¾ Dual Voltage Input 120/277VAC 60Hz ¾ Solid-State Voltage Limited Charger ¾ Solid-state Switching ¾ Brownout Circuit ¾ Low Voltage Disconnected ¾ Overload/Short Circuit Protection ¾ Test Switch/Power Indicator Light
¾ UL 924 Listed ¾ Most State and Local Codes
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
¾ AC LED: Long Life LED Lamps Provide Uniform Diffused Illumination ¾ 120V, 5W, 90 Minutes Emergency Time, 0.041A ¾ 277V, 5W, 90 Minutes Emergency Time, 0.018A ¾ DC: LED Lamps
ORDER MATRIX Example: EXL013
A B C D E F
A
C
D
E
F
Series
Input Volt
Face
Battery
Letter Color
EXL013
277
DFSF
U
RDGN
Exit sign
120V
Single
Battery backup
277V
Double
120-277V
RedGreen
AC AC only
B Sign
RExitRunning Man
Running Man Available(120-347V)
143www.liteharbor.com
LED EXIT SIGN
LED Elevator Sign
ORDER MATRIX Example: EXL012-EL
A B C D E F G H
A
C
D
E
F
G
H
Series
Input Volt
Face
Battery
Letter Color
Arrow
Mounting
EXL012-EL
277
DF
AC
SF
U
RD
SM
RA
PM
GN
LA
RM
BA
Elevator sign
120V
Single
Battery backup
277V
Double
AC only
120-277V
Red
No
Surface Mount
Right
Pendant Mount
Green
Left
Recessed Mount
Left and Right
Fixture
Optional
Packing
¾ EXIT signs Single sided ceiling mount 1~3W,120V/277V ¾ White translucent background with red painted letters ¾ White LED lighting (5100-5500k) ¾ Acrylic plate material ¾ Rechargeable Ni-Cad battery (option for AC/DC-self powered) backup ¾ AC circuit for emergency(option for AC/DC-Two Circuit)
¾ Arrow optional ¾ Green or red printed letter ¾ Single or double face ¾ Mounting way
¾ 4pcs/ctn Carton size: 418*498*354mm ¾ Net weight: 8.0kg ¾ Gross weight: 10.2kg
B Sign
REL Elevator
Running Man
Running Man Available(120-347V)
144 www.liteharbor.com
EMERGENCY LIGHT
Fixture
Electrical Technology
Light Source
Battery Mounting
¾ Injection-molded thermoplastic ABS housing ¾ UL 94V-0 flame rating ¾ Innovative, snap-together design allows for fast and easy installation ¾ Fully adjustable glare-free emergency light heads ¾ With push button test switch ¾ 100% solid-state switching ¾ UL Number: E472028
¾ 120/277 VAC Dual voltage operation ¾ Low power consumption-3.8 watts at normal operation, 15 watts at emergency operation
¾ 6V 5W wedge base T15 DC lamps for emergency mode ¾ Lamps are operating in normal (AC input) and emergency (DC input) MODES
¾ Battery backup (6V 4.5Ah) ¾ 24 hours recharge after 90 minutes discharge
¾ Low voltage battery disconnection
¾ Wall or Ceiling mounting ¾ Easily removed mounting knock-outs and J-box pattern on back plate
¾ Injection-molded thermoplastic ABS housing ¾ Fully adjustable glare-free single ¾ 5" diameter canopy matching round mounting plate for 3" or 4" box standard ¾ 6V 6W DC lamp for emergency light ¾ Damp location listed ¾ UL Number: E472028
Thermoplastic Emergency Light
Thermoplastic Emergency Light
Thermoplastic Emergency Light With Power Supply Cord
FixtureItem: EML101
Item:EML201
Item:EML202Fixture
Electrical Technology
Battery
Light Source
Mounting
¾ Injection-molded thermoplastic ABS housing ¾ UL 94V-0 flame rating ¾ Innovative, snap-together design allows for fast and easy installation ¾ Fully adjustable glare-free emergency light heads ¾ With push button test switch ¾ 100% solid-state switching ¾ UL Number: E472028
¾ 120/277 VAC Dual voltage operation ¾ Low power consumption-3.8 watts at normal operation, 15 watts at emergency operation
¾ Battery backup (6V 4.5Ah) ¾ 24 hours recharge after 90 minutes discharge ¾ Low voltage battery disconnection
¾ 6V 5W wedge base T15 DC lamps for emergency mode ¾ Lamps are operating in normal (AC input) and emergency (DC input) MODES
¾ Wall or Ceiling mounting ¾ Easily removed mounting knock-outs and J-box pattern on back plate
Battery
Warranty
¾ The sign is designed with a maintenance free, nickel-cadmium battery that provides a minimum emergency duration of 90 minutes. Recharge time of the battery is twenty-four (24) hours
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
145www.liteharbor.com
EMERGENCY LIGHT
LED Emergency Light
LED Emergency Light
LED Emergency Light
Item: EML203
Item:EML205
Item:EML206
Fixture
Electrical Technology
Light Source
Battery
Mounting
¾ Injection-molded thermoplastic ABS housing ¾ UL 94V-0 flame rating ¾ Innovative, snap-together design allows for fast and easy installation ¾ Completely self-contained, fully automatic operation ¾ Compact low-profile design in neutral finish ¾ Push-to-test switch ¾ Damp location listed ¾ UL Number: E472028
¾ 120/277 VAC Dual voltage operation ¾ Test switch and charge rate indicator
¾ 6V 5.4W wedge base T15 DC lamps for emergency mode
¾ 24 hours recharge after 90 minutes discharge ¾ Low voltage battery disconnection
¾ Universal (wall, side or ceiling) mounting
Fixture
Electrical Technology
Light Source
Battery
Mounting
¾ Injection-molded thermoplastic ABS housing ¾ UL 94V-0 flame rating ¾ Two fully adjustable eyeball shape light heads for emergency light ¾ Innovative, snap-together design for fast installation ¾ UL Number: E472028
¾ 120/277 VAC Dual voltage operation ¾ Low power consumption-3.8 watts at normal operation, 15 watts at emergency operation ¾ LED indicator light and push button test switch ¾ Remote capability- may power additional remote heads (up to 6V 12W) with additional battery
¾ 6V 5.4W DC T5 wedge lamps for emergency mode
¾ Lead-Calcium Battery (6V 4.5Ah) ¾ May use additional battery, when add remote light heads to the fixture. (Total 2pcs×6V 4.5 Ah
battery) ¾ Low voltage battery disconnection
¾ Wall or Ceiling mounting ¾ Easily removed mounting knock-outs and J-box pattern on back plate
Fixture
Electrical Technology
Battery
Light Source
Mounting
¾ Injection-molded thermoplastic ABS housing ¾ Completely self-contained ¾ Fully automatic operation ¾ Compact low-profile design ¾ Push-to-test switch ¾ Damp location listed ¾ Two fully adjustable eyeball shape light heads for emergency light ¾ UL Number: E472028
¾ 120/277 VAC Dual voltage operation ¾ Test switch and charge rate indicator ¾ Operation time-90 minutes
¾ Battery backup ¾ Full Recharge Time is 24hrs (max.) ¾ Automatic low voltage disconnects (LVD)
¾ Ultra-bright MR16 LED lamps
¾ Wall or Ceiling mounting ¾ Easily removed mounting knock-outs and J-box pattern on back plate
146 www.liteharbor.com
EMERGENCY LIGHT
Emergency Light
Bullet Heads Design Emergency Light
Emergency Light
Item: EML207
Item:EML209
Item:EML211
Fixture
Electrical Technology
Light Source
Battery Mounting
¾ Injection-molded thermoplastic housing ¾ Compact low-profile design in neutral finish ¾ Universal mounting plate w/ Quick Connect for rapid installation ¾ Two fresnel lenses maximize light output and provides glare-free light distribution ¾ Push-to-test switch ¾ Automatic low voltage disconnects (LVD) ¾ Damp location listed ¾ UL Number: E472028
¾ 120/277 VAC Dual voltage operation ¾ Test switch and charge rate indicator ¾ Operation time-90 minutes
¾ 6V 5W wedge base T15 DC lamps for emergency mode
¾ Full Recharge Time is 24hrs (max.), operation time-90 minutes
¾ Automatic low voltage disconnects (LVD)
¾ Wall or Ceiling mounting ¾ Easily removed mounting knock-outs and J-box pattern on back plate
Fixture
Lamp Date
Battery
Warranty
Fixture
¾ 20 Gauge Steel Housing ¾ Bullet Heads Design in neutral finish ¾ Fully adjustable glare-free double heads ¾ Universal mounting plate pattern ¾ Damp location listed
¾ 120/277 VAC Dual voltage operation ¾ 6V DC 3W/lamp for emergency mode
¾ a maintenance free, nickel-cadmium battery that provides a minimum emergency duration of 90 minutes.Recharge time of the battery is twenty-four (24) hours
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
¾ Injection-molded thermoplastic ABS housing ¾ Fully adjustable glare-free single or double heads ¾ 5" diameter canopy matching round mounting plate for 3" or 4" box standard ¾ 6V 6W DC lamp for emergency light ¾ Damp location listed
Battery
Warranty
¾ The sign is designed with a maintenance free, nickel-cadmium battery that provides a minimum emergency duration of 90 minutes. Recharge time of the battery is twenty-four (24) hours
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
147www.liteharbor.com
EMERGENCY LIGHT
Fixture
Electrical Technology
Battery
Code Compliance
Lamp Date
Warranty
¾ Bright 9 Watt Long Life Lamps ¾ Energy Saving LED Lamps ¾ Heavy Duty 20 Gauge Steel Housing ¾ Durable White Powder Coated Finish Other FinishPlease Consult Factory ¾ New York Style Other State Style Also Are Available ¾ Other State Styles Are Also Available ¾ Universally Surface Mounted, Ceiling, Wall or End ¾ Universal J-box Mounting Pattern
¾ Dual Voltage Input 120/277VAC 60Hz ¾ Solid-State Voltage Limited Charger ¾ Solid-state Switching ¾ Brownout Circuit ¾ Low Voltage Disconnected ¾ Overload/Short Circuit Protection ¾ Test Switch/Power Indicator Light
¾ Lead-acid storage battery ¾ Maintenance-Free, Long Life ¾ Full Recharge Time 24 Hours (max) ¾ Rechargeable 6V
¾ UL 924 Listed ¾ Most State and Local Codes
¾ AC LED: Long Life LED Lamps Provide Uniform DiffusedIllumination ¾ 120V, 7.1W, 90 Minutes Emergency Time, 0.066A ¾ 277V, 8W, 90 Minutes Emergency Time, 0.031A ¾ DC: LED Lamps
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
Remote Head Led Emergency LightItem:EML212
148 www.liteharbor.com
EXIT EMERGENCY COMBO
ORDER MATRIX Example: XML201
A B C D E F G
A
C
D
E
F
G
Series
Input Volt
Battery
Housing Color
Letter Color
Arrow
XML201
277
AC
U
WH
RD
RA
BK
GN
LA
BA
Combo
120V
Battery backup
277V
AC only
120-277V
White
Red
No
Right
Black
Green
Left
Left and right
Fixture
Electrical Technology
Light Source
Battery
Mounting
¾ Injection-molded thermoplastic ABS housing ¾ UL 94V-0 flame rating, fire-retardant ¾ LED indicator light and push button test switch ¾ Single face configuration ¾ Letters 6"height with 3/4"stroke ¾ Innovative, snap-together design allows for fast installation ¾ Replaceable directional chevron inserts are easily removed and reinserted
¾ 120/277 VAC Dual voltage operation ¾ LED indicator light and push button test switch
¾ LEDs are mounted mound on spirit circuit board (for exit sign) ¾ LED lamps are operating in normal (AC input) and emergency (DC input) MODES
¾ 6V 4.5Ah battery ¾ 24 hours recharge after 90 minutes discharge ¾ Low voltage battery disconnection-preventing deep discharge damage to the battery
¾ Combination unit is suitable for surface ceiling, wall and pendant mounting
Exit & Emergency Light Combo
B Sign
RExitRunning Man
Running Man Available(120-347V)
149www.liteharbor.com
EXIT EMERGENCY COMBO
ORDER MATRIX Example: XML202
A B C D E F G
A
C
D
E
F
G
Series
Input Volt
Battery
Housing Color
Letter Color
Arrow
XML202
277
AC
U
WH
RD
RA
BK
GN
LA
BA
Combo
120V
Battery backup
277V
AC only
120-277V
White
Red
No
Right
Black
Green
Left
Left and right
Fixture
Electrical Technology
Light Source
Battery
Mounting
¾ Injection-molded thermoplastic ABS housing ¾ Combination housing design, exit & emergency unit ¾ UL 94V-0 flame rating ¾ Innovative, snap-together design allows for fast installation ¾ Letter 6" height with 3/4" stroke ¾ Two fully adjustable compact size eyeball shape light heads for emergency light ¾ UL Number: E472028
¾ 120/277VAC dual voltage operation ¾ Low power consumption: 2.3 watts at normal operation, 12 watts at emergency operation
¾ LED indicator light and push button test switch
¾ LEDs are mounted on print circuit board (For Exit Sign); LEDs or incandescent light source for emergency
¾ LED lamps are operating in normal (AC input) and emergency (DC input) modes ¾ 2 X 6V 5.4 or 6W wedge base T15 DC lamps for emergency mode
¾ 6V 4.5Ah battery ¾ 24 hours recharge after 90 minutes discharge ¾ Low voltage battery disconnection-preventing deep discharge damage to the battery
¾ Combination unit is suitable for surface ceiling, wall and pendant mounting
Exit & Emergency Light Combo
B Sign
RExitRunning Man
Running Man Available(120-347V)
150 www.liteharbor.com
EXIT EMERGENCY COMBO
Exit & Emergency Light Combo
ORDER MATRIX Example: XML203
A B C D E F G
A
C
D
E
F
G
Series
Input Volt
Battery
Housing Color
Letter Color
Arrow
XML203
277
AC
U
WH
RD
RA
BH
GN
LA
BA
Combo
120V
Battery backup
277V
AC only
120-277V
White
Red
No
Right
Black
Green
Left
Left and right
Fixture
Electrical Technology
Light Source
Battery
Mounting
¾ Injection-Molded thermoplastic ABS housing ¾ UL 94V-0 flame rating ¾ Innovative, snap-together design allows for fast installation ¾ Letter 6" height with 3/4" stroke ¾ Low energy consumption ¾ Lead-calcium battery
¾ 120/277VAC Dual voltage operation ¾ LED indicator light and push button test switch
¾ LEDs are mounted on print circuit board. (For Exit Sign) ¾ LED lamps are operating in normal (AC input) and emergency (DC input) modes ¾ 2x6V 5.4W LED MR16 lamps for emergency mode
¾ Battery backup (6V 4.5Ah) ¾ 24 hours recharge after 90 minutes discharge ¾ Low voltage battery disconnection-preventing deep discharge damage to the battery
¾ Combination unit is suitable for surface ceiling, wall and pendant mounting
B Sign
RExitRunning Man
Running Man Available(120-347V)
151www.liteharbor.com
EXIT EMERGENCY COMBO
Wet Location Single Face Combo
ORDER MATRIX Example: XML205
A B C D E F G
A
C
D
E
F
G
Series
Input Volt
Battery
Housing Color
Letter Color
Arrow
XML205
277
AC
U
WH
RD
RA
BK
GN
LA
BA
Combo
120V
Battery backup
277V
AC only
120-277V
White
Red
No
Right
Black
Green
Left
Left and right
Fixture ¾ Fully gasketed polycarbonate lens and ABS thermoplastic housing ¾ Innovative design allows for fast installation ¾ Knockout directional chevrons ¾ Letters 6" height with 3/4" stroke ¾ Single face configuration only ¾ Optional emergency heads ¾ Wet Location Rated ¾ UL Number: E472028
Electrical Technology ¾ 120/277VAC dual voltage operation ¾ Low energy consumption-only 2.5 watts at 120V ¾ LED indicator light and push button test switch
Light Source
Battery
Mounting
¾ LED lamps are operating in normal (AC input) and emergency (DC input) modes ¾ Optional 6V SEALED BEAM lamp heads
¾ AC only, No battery backup ¾ Battery backup, 24 hours recharge after 90 minutes discharge ¾ Low voltage battery disconnection- Preventing deep discharge damage to the battery
¾ Wall, ceiling or end mounting configurations are available
B Sign
RExitRunning Man
Running Man Available(120-347V)
152 www.liteharbor.com
EXIT EMERGENCY COMBO
ORDER MATRIX Example: XML206
A B C D E F G
A
C
D
E
F
G
Series
Input Volt
Battery
Housing Color
Letter Color
Arrow
XML206
277
AC
U
WH
RD
RA
BK
GN
LA
BA
Combo
120V
Battery backup
277V
AC only
120-277V
White
Red
No
Right
Black
Green
Left
Left and right
Fixture
Electrical Technology
Light Source
Battery
Mounting
¾ Injection-Molded thermoplastic ABS housing ¾ Combination housing design, exit & emergency unit ¾ Plastic enclosure with UL94-5VA flame rating ¾ Innovative, snap-together design allows for fast installation ¾ Letter 6" height with 3/4" stroke ¾ Emergency lights can be adjusted. ( Side mounting or Top mounting) ¾ UL Number: E472028
¾ 120/277 VAC Dual voltage operation ¾ LED indicator light and push button test switch ¾ Low power consumption 2.8 watts at normal operation, 3.5 watts at emergency operation
¾ 2 X LED light heads for emergency mode ¾ 70lm output on emergency operation
¾ 24 hours recharge after 90 minutes discharge ¾ Low voltage battery disconnection-preventing deep discharge damage to the battery
¾ Combination unit is suitable for surface ceiling, wall and pendant mounting
Exit & Emergency Light Combo
B Sign
RExitRunning Man
Running Man Available(120-347V)
153www.liteharbor.com
EXIT EMERGENCY COMBO
ORDER MATRIX Example: XML207
A B C D E F G
A
C
D
E
F
G
Series
Input Volt
Battery
Housing Color
Letter Color
Arrow
XML207
277
AC
U
WH
RD
RA
BK
GN
LA
BA
Combo
120V
Battery backup
277V
AC only
120-277V
White
Red
No
Right
Black
Green
Left
Left and right
Fixture
Electrical Technology
Light Source
Battery
Mounting
¾ Injection-molded thermoplastic ABS housing ¾ UL 94V-0 flame rating ¾ Use small square head ¾ Innovative, snap-together design allows for fast installation ¾ Replaceable directional chevron inserts are easily ¾ Removed and reinserted ¾ Letters 6" height with 3/4" stroke ¾ Damp Location Rated ¾ UL Number: E472028
¾ 120/277VAC Dual voltage operation ¾ LED indicator light and push button test switch
¾ LEDs mounted on print circuit board. (For Exit Sign) ¾ LED lamps are operating in normal (AC input) and emergency (DC input) modes ¾ 2 X 6V 6W halogen MR-16 lamps for emergency mode
¾ Lead-Acid Battery (6V 4.5Ah) ¾ May use additional battery, when add remote light heads to the fixture. (Total 2pcs x 6V 4.5Ah battery)
¾ Low voltage battery disconnection
¾ Combination unit is suitable for surface ceiling, wall and pendant mounting
Exit & Emergency Light Combo
B Sign
RExitRunning Man
Running Man Available(120-347V)
154 www.liteharbor.com
EXIT EMERGENCY COMBO
ORDER MATRIX Example: XML208
A B C D E F G
A
C
D
F
E
G
Series
Input Volt
Battery
Face
Letter Color
Lamp Head
XML208
277
AC
U
SF
RD
H2
DF
GN
H3
Exit sign
120V
Battery backup
277V
AC only
120-277V
Single
Red
2 Heads
Double
Green
3 Heads
Fixture
Electrical Technology
Battery
Code Compliance
Lamp Date
Warranty
¾ Bright 9 Watt Long Life Lamps Three Heads ¾ Energy Saving LED Lamps ¾ Heavy Duty 20 Gauge Steel Housing ¾ Durable White Powder Coated Finish Other FinishPlease Consult Factory ¾ Other State Style Are Also Available ¾ Universally Surface Mounted, Ceiling ,Wall or End ¾ Universal J-box Mounting Pattern ¾ Red or Green Letter Colors
¾ Dual Voltage Input 120/277VAC 60Hz ¾ Solid-State Voltage Limited Charger ¾ Solid-state Switching ¾ Brownout Circuit ¾ Low Voltage Disconnected ¾ Overload/Short Circuit Protection ¾ Test Switch/Power Indicator Light
¾ Sealed Nickel Cadmium (Self-Powered exits only) ¾ Maintenance-Free, Long Life ¾ Full Recharge Time 24 Hours (max) ¾ Rechargeable 6V
¾ UL 924 Listed ¾ Most State and Local Codes
¾ AC LED: Long Life LED Lamps Provide Uniform Diffused Illumination ¾ 120V, 3.22W, 90 Minutes Emergency Time, 0.0295A ¾ 277V, 3.16W, 90 Minutes Emergency Time, 0.0127A ¾ DC: LED Lamps
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
LED Exit & Emergency Light
B Sign
RExitRunning Man
Running Man Available(120-347V)
155www.liteharbor.com
EXIT EMERGENCY COMBO
ORDER MATRIX Example: XML209
A B C D E F
A
C
D
F
E
Series
Input Volt
Battery
Face
Letter Color
XML209
277
AC
U347
SF
RD
DF
GN
Exit sign
120V
Battery backup
277V
AC only
120-277V347V
Single
Red
Double
Green
Description
Battery
Electrical Specifications
Mounting
Head fixtures
Warranty
¾ The running man combo is a series of completely self-contained, combination emergency light and running man sign.The units feature an attractive, durable impact resistant 20 gauge steel housing design that is ideal for commercial and architectural applications
¾ Universal mounting pattern and key hole slots are stamped into the backplate ¾ Standard with a white finish,Special finishes for customization ¾ Single or double faced signs are available, order separately ¾ Innovative, snap-together design allows for fast installation ¾ Self-Powered model delivers standard two hours of back-up lighting
¾ The sign is designed with a maintenance free, nickel-cadmium battery that provides a minimum emergency duration of 90 minutes. Recharge time of the battery is twenty-four (24) hours
¾ Universal Voltage Input 120-347 VAC 50/60Hz ¾ Universal 2 wire input 6V DC ¾ High-output LEDs which uses only 2W nominal power.
¾ Wall, ceiling or end mounting configurations are available
¾ The running man combo series is supplied with two LED 3W max. bullet design heads
¾ EXIT: 2-Year ¾ Battery: 15-Year Pro-rata
Running Man Emergency Exit Sign Combo
B Sign
RExitRunning Man
Running Man Available(120-347V)
157www.liteharbor.com
CABINET LIGHT
¾ MR11 Mini Adjustable Down Light ¾ Recessed mounted Housing included ¾ Clear glass included ¾ 40° adjustment ¾ Remote 12V transformer required ¾ ETL listed damp locations ¾ Lamp: LED MR11 12V 5W max ¾ Finish: WH/ BK/ SN/ MO
¾ MR16 Mini Adjustable Down Light ¾ Recessed mounted Includes remote housing ¾ Clear glass included ¾ 40° adjustment ¾ Remote 12V transformer required ¾ ETL listed damp locations ¾ Lamp: LED MR16 12V 8W max ¾ Finish: WH/ BK/ SN/ MO
Model: AM9
Model: AM12
158 www.liteharbor.com
CABINET LIGHT
¾ Metal body ¾ Can be mounted recessed ¾ Packaged with one LED driver (with wide input 100-240V) with 6 feet power cord and plug
¾ 120V LED Puck lights, 3 LED pucks accent kit ¾ Easy to install, surface or recess mount ¾ Warm white, 4W each puck ¾ Linkable dimmable ¾ 50% brighter than halogen or xenon pucks ¾ Cool to touch ¾ Energy saving ¾ Long life ¾ Lens cover is UV filter
¾ Use SMD LED Chips ¾ 12W 120V ¾ To remove lens cover ¾ Turn counter clockwise ¾ Use a soft cloth when handling the bulb ¾ To replace lens cover turn clockwise until cover is secured
¾ COB LED 1W X 3, 150lm, 3000K
¾ White ¾ Black ¾ Satin Nickel ¾ Chrome
Description
LED Accent Kit
Bulb Replacement
Lamp
Available Finish
Model: DGL-U7016
Model: DGL-U7017
159www.liteharbor.com
CABINET LIGHT
¾ This unit is capable of being converted as a fixed hard wire unit when used with supplied parts bag
¾ Suitable For under cabinet mount ¾ 1” thin ¾ Opal Glass diffuser ¾ Linkable to 20pcs max ¾ On-off switch ¾ Lock out for hard wiring ¾ Hard wire or plug in ¾ 25000 hours life time ¾ Body coating body white, black, silver are available ¾ Dry location only
¾ Made of die-formed rolled steel ¾ PC cover no UV no glare ¾ Fixture is pre-wire for immediate hard wire connection to 120V power source ¾ Powder coating is high temperature resistance ¾ 102 switch for controlling lighting ¾ Clear glass cover ¾ Electronic transformer
¾ Surface mounting and hanging mounting are both available
¾ cULus suitable for damp location
Item No. Input Volt Wattage Finish DimensionsU7014
120V3W
White/ Black/ Silver14"(L)*2"(W)*1"(H)
U7024 6W 24"(L)*5"(W)*1"(H)U7034 9W 34"(L)*5"(W)*1"(H)
¾ Linking wire ¾ Plug in cord ¾ Hand wire connection
¾ Risk of fire/ injury to persons. Use only on 15 amp maximum branch circuit ¾ Keep away from combustibles ¾ Turn off/unplug to install the fixtures ¾ Do not touch the led ¾ Do not look the leds directly when the fixture is working ¾ Only connect to adjacent units ¾ Connected unites not to exceed total 200 watts ¾ Suitable for 1/2” flexible conduit A.C only and C.A SECUREMENT ¾ Suitable for under-cabinet mounting
Item No. Dimension Watt Linkable Q’ty ReplacementDGL-UCL0903 9” L x 4-1/16” W x 1-7/16” H 3 20pcs 25w halogenDGL-UCL1206 12” L x 4-1/16” W x 1-7/16” H 6 20pcs 50w halogenDGL-UCL1809 18” L x 4-1/16” W x 1-7/16” H 9 20pcs 75w halogenDGL-UCL2412 24” L x 4-1/16” W x 1-7/16” H 12 20pcs 100w halogen
LED Under Cabinet Task Light
LED Under Cabinet Light
Mounting
Listing
Technology Data
Accessories Included
Caution
Technology Data
DGL-UCL0903
U7014
DGL-UCL1206
U7024
DGL-UCL1809
U7034
DGL-UCL2412
160 www.liteharbor.com
CABINET LIGHT
¾ Made of die-formed rolled steel ¾ PC cover no UV no glare ¾ Three primary colors good for eyes ¾ Fixture is pre-wire for immediate hard wire connection to 120V power source ¾ Powder coating is high temperature resistance
¾ 1×T5 8/13/13+8/13+13W ¾ Color temperature does at customers’ requirements
¾ Two mounting screws provided for installation into wood surface two key hole slots located in the back of the fixture housing
¾ cULus suitable for damp location
Item No. Input Volt Wattage SizeUC1250
120V
8W 12"(L)*5"(W)*1"(H)UC2150 13W 21"(L)*5"(W)*1"(H)UC3350 21W 33"(L)*5"(W)*1"(H)UC4250 26W 42"(L)*5"(W)*1"(H)
T5 Under Cabinet Light
Lamp
Mounting
Listing
Technology Data
UC1250 UC2150 UC3350 UC4250
162 www.liteharbor.com
CEILING LIGHT
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
FM-A122
Flush Mount 110V-220V
12”2 lights G9 base 2x4W LED
Alabaster
Linen
Opal Frosted
Satin NickelChrome
Oil Rubbed BrownOther colors consult our
factory.
2 lights E26 base 2x10W LEDEpistar SMD 2835 18W
FM-A163 16”3 lights G9 base 3x4W LED
3 lights E26 base 3x10W LEDEpistar SMD 2835 24W
Dimensions: 12" Dimensions: 16"
SN CH ORB
SN CH ORB
SN CH ORB
Dimensions: 12" Dimensions: 16"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
FM-B122
Flush Mount 110V-220V
12”2 lights G9 base 2x4W LED
Alabaster
Linen
Opal Frosted
Satin NickelChrome
Oil Rubbed BrownOther colors consult our
factory.
2 lights E26 base 2x10W LEDEpistar SMD 2835 18W
FM-B163 16”3 lights G9 base 3x4W LED
3 lights E26 base 3x10W LEDEpistar SMD 2835 24W
Dimensions: 12" Dimensions: 16"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
FM-C122
Flush Mount 110V-220V
12”2 lights G9 base 2x4W LED
Alabaster
Linen
Opal Frosted
Satin NickelChrome
Oil Rubbed BrownOther colors consult our
factory.
2 lights E26 base 2x10W LEDEpistar SMD 2835 18W
FM-C163 16”3 lights G9 base 3x4W LED
3 lights E26 base 3x10W LEDEpistar SMD 2835 24W
163www.liteharbor.com
CEILING LIGHT
SN CH ORB
Dimensions: 12" Dimensions: 16"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
FM-D122
Flush Mount 110V-220V
12”2 lights G9 base 2x4W LED
Alabaster
Linen
Opal Frosted
ChromeSatin Nickel
Oil Rubbed BrownOther colors consult our
factory.
2 lights E26 base 2x10W LEDEpistar SMD 2835 18W
FM-D163 16”3 lights G9 base 3x4W LED3 lights E26 base 3x10W LEDEpistar SMD 2835 24W
Dimensions: 12" Dimensions: 16"
Item No. Mounting Input Volt. Size Lamp&Wattage Finish
FM-E122
Flush Mount 110V-220V
12”2 lights G9 base 2x4W LED Chrome
Satin Nickel
Oil Rubbed Brown
Other colors consult our factory.
2 lights E26 base 2x10W LEDEpistar SMD 2835 18W
FM-E163 16”3 lights G9 base 3x4W LED
3 lights E26 base 3x10W LEDEpistar SMD 2835 24W
SN CH ORB
SN CH ORB
Dimensions: 12" Dimensions: 16"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
FM-F122
Flush Mount 110V-220V
12”2 lights G9 base 2x4W LED
Alabaster
Linen
Opal Frosted
ChromeSatin Nickel
Oil Rubbed BrownOther colors consult our
factory.
2 lights E26 base 2x10W LEDEpistar SMD 2835 18W
FM-F163 16”3 lights G9 base 3x4W LED
3 lights E26 base 3x10W LEDEpistar SMD 2835 24W
164 www.liteharbor.com
CEILING LIGHT
SN
SN
CH
CH
ORB
ORB
Dimensions: 12" Dimensions: 16"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
FM-G122
Flush Mount 110V-220V
12”2 lights G9 base 2x4W LED
Alabaster
Linen
Opal Frosted
ChromeSatin Nickel
Oil Rubbed BrownOther colors consult our
factory.
2 lights E26 base 2x10W LEDEpistar SMD 2835 18W
FM-G163 16”3 lights G9 base 3x4W LED
3 lights E26 base 3x10W LEDEpistar SMD 2835 24W
Dimensions: 12" Dimensions: 16"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
FM-H122
Flush Mount 110V-220V
12”2 lights G9 base 2x4W LED
Alabaster
Linen
Opal Frosted
ChromeSatin Nickel
Oil Rubbed BrownOther colors consult our
factory.
2 lights E26 base 2x10W LEDEpistar SMD 2835 18W
FM-H163 16”3 lights G9 base 3x4W LED
3 lights E26 base 3x10W LEDEpistar SMD 2835 24W
SN CH ORB
Dimensions: 6" Dimensions: 10"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
MU-6
Flush Mount 110V-220V
6”1 light G9 base 1x4W LED
Alabaster
Linen
Opal Frosted
WhiteChrome
Satin NickelOil Rubbed Brown
Other colors consult our factory.
1 light E26 base 1x10W LEDEpistar SMD 2835 18W
MU-10 10”2 lights G9 base 2x4W LED
2 lights E26 base 2x10W LEDEpistar SMD 2835 24W
165www.liteharbor.com
CEILING LIGHT
Dimensions: 12" Dimensions: 16"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
FM-S122
Flush Mount 110V-220V
12”2 lights G9 base 2x4W LED
Alabaster
Linen
Opal Frosted
ChromeSatin Nickel
Oil Rubbed BrownOther colors consult our
factory.
2 lights E26 base 2x10W LEDEpistar SMD 2835 18W
FM-S163 16”3 lights G9 base 3x4W LED
3 lights E26 base 3x10W LEDEpistar SMD 2835 24W
SN CH ORB
167www.liteharbor.com
WALL SCONCE
SN
SN
CH
CH
ORB
ORB
Dimensions: 12"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
WS-A122 Flush Mount 110V-220V 12”
1 light G9 base 1x4W LED Alabaster
Linen
Opal Frosted
Satin NickelChrome
Oil Rubbed BrownOther colors consult our
factory.1 light E26 base 1x10W LED
Dimensions: 12"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
WS-B122 Flush Mount 110V-220V 12”
1 light G9 base 1x4W LED Alabaster
Linen
Opal Frosted
Satin NickelChrome
Oil Rubbed BrownOther colors consult our
factory.1 light E26 base 1x10W LED
SN CH ORB
Dimensions: 12"
Item No. Mounting Input Volt. Size Lamp&Wattage Glass Finish
WS-C122 Flush Mount 110V-220V 12”
1 light G9 base 1x4W LED Alabaster
Linen
Opal Frosted
Satin NickelChrome
Oil Rubbed BrownOther colors consult our
factory.1 light E26 base 1x10W LED
168 www.liteharbor.com
WALL SCONCE
SN
SN
CH
CH
ORB
ORB
SN CH ORB
Dimensions: 12"
Item No. Mounting Input Volt. Lamp Wattage Glass Finish
WS-11AL Flush Mount 110V-130V220V-240V J78 1x6W LED
Diamond Alabaster
LinenOpal Frosted
Satin NickelChrome
Oil Rubbed BrownOther colors consult our factory.
Dimensions: 12"
Item No. Mounting Input Volt. Lamp Wattage Glass Finish
WS-12AL Flush Mount 110V-130V220V-240V J78 2x6W LED
DiamondAlabaster
LinenOpal Frosted
Satin NickelChrome
Oil Rubbed BrownOther colors consult our
factory.
Dimensions: 12"
Item No. Mounting Input Volt. Lamp Wattage Glass Finish
WS-13AL Flush Mount 110V-130V220V-240V J78 3X6W LED
DiamondAlabaster
LinenOpal Frosted
Satin NickelChrome
Oil Rubbed BrownOther colors consult our
factory.
170 www.liteharbor.com
MIRROR LIGHT
The mirror is square in shape with two strip lights running down either side and is operated using a pull cord.Wattage: 2x3WVoltage: 120-277VBulb includedSwitchedIntegral pill cord includedIP Rating: IP44Lamp: LED T5 LampsClass: Class 2, double insulatedSuitable for: Bathroom wallsFinish: Mirror finish, sandblasted detail
Perfect for shaving, brushing teeth and other every day bathroom tasks, this mirror has a large rectangular face and frosted acrylic sides.Wattage: 2x3WVoltage: 120-277VBulb includedSwitchedIP Rating: IP44Lamp: LED T5 lampsClass: Class 2, double insulatedSuitable for: Bathroom WallsIntegral heated demister includedIntegral hand-wave on/off switchFinish: Mirror finish, frosted acrylic sides
The MRR125 Magnifying Mirror is a great light fitting for any modern bathroom in homes, apartments and hotels. It has a round front that sits on a polished chrome stem and base. Ideal for shaving and other daily tasks, the light is operated by way of a pull cord switch.Wattage: 1x4WVoltage: 120-277VBulb includedSwitchedIP Rating: IP44Lamp: LED G9 LampClass: Class 1Suitable for: Bathroom WallsFinish: Polished chrome finish, sandblasted detail
Dimensions: H.600 W.600 D.60mm
Dimensions: H. 610mm W.600mm D.35mm
Dimensions: Dia.220mm D.350mm max
Model: MR213
Model: MR214
Model: MRR125
171www.liteharbor.com
MIRROR LIGHT
24 in.L x 24 in.W Round LED Lighted Glass Wall Mirror Semi Flush MountFeatures a polished edge mirror that hangs on a white powder coated stainless steel backing. The classic round shape has a 2 in. wide frosted inner circle which bright LED light shines through.Easy hanging system featuring an invisible rubber trims for waterproof designOn/off switch5 mm polished edge glass mirror50,000 hour LED bulbs6,000K color temperature lightRequires electrical hardwire installation
The sophisticated design MRC115 Illuminated Mirror Cabinet looks great on bathroom walls in any contemporary home, as well as commercial properties such as hotels. The cabinet has a brushed aluminium frame and can be used to store all kinds of bathroom products.Wattage: 1x8WVoltage: 120-277VBulb includedSwitchedIP Rating: IP44Lamp: LED T8 lampClass: Class 2, double insulatedSuitable for: Bathroom WallsFinish: Brushed aluminium frame
Dimensions: Dia.610mm D.610mm max
Dimensions: H.700 W.550 D.110mm
Model: MRR024
Model: MRC115
173www.liteharbor.com
OUTDOOR LIGHT
¾ The stainless steel bollard is constructed of 316 marine grade stainless steel and is cold worked for superior corrosion resistance ¾ Ideal for harsh environments and where corrosion is common ¾ Choose from 4 head styles: 360°open head,180°open head 360°slotted head and 180°slotted gead. ¾ Provides uniform illumination and superior brightness control. Ideal for courtyards providing a safe ambient lighting
¾ Prewired integral driver for ease of installation. ¾ Driver is mounted to a stainless steel hanger bracket directly below the lamp. ¾ Tamper proof set screws for re-lamp access ¾ Easy to maintain impact resistant long-life polished stainless steel. ¾ Conical upper reflector for optimal light distribution ¾ UV stabilized 25"thick polycarbonate frosted lens ¾ Available in 24",32"or 42"height. Confirm with factory for other lengths
¾ Bollard base is secured by three 3 internal heavy-duty stainless steel rods ¾ Mounts to three stainless steel anchor bolts ,each with two nuts and washers. ¾ Anchor kit supplied with fixture. ¾ Includes a stainless steel leveling bracket/template.
¾ Bollard top is easily removed for re-lamping and ballast accessibility. ¾ Secured by three tamper-proof stainless steel set screws. ¾ Weather-tight frosted UV stabilized polycarbonate lens with rubber gaskets completely seals unit.
¾ Stainless steel requires regular dealing and maintenance to prevent tarnishing or tea staining.
¾ LED ¾ Metal Halide ¾ Compact Fluorescent13W maxRecommend 6W high brightnessLife tine:>50000 hoursCurrent 700Ma driverInput:100-240V50/60HzOutput:Max 12V DC
20W T6 CMH39W T6 CMGG12 Base120-277V HPF electronic ballast with inherent thermalprotectionSound rated AMinimum ballast temp -15℃ /5℃ .Harmonic distortion<20%Outdoor type 1Increased reliability and safety with lamp "Turn-off Function"
13W DTT18/26W TRTGU24 Universal SocketAdvance ballastInherent thermal protectionHigh power factorSound rated AClass P minimum ballast temp -18℃ /0 ℉Harmonic distortion<10%Outdoor type 1
Description
01 02
Features
Anchor Base
Lamp Enclosure
Maintenance
Electrical
Item: Y0301
174 www.liteharbor.com
OUTDOOR LIGHT
¾ Aluminum lamp body ¾ Opal PC diffuser ¾ Silicone rubber gasket ¾ Powder coating finish ¾ LED 0.5Wx16 /800LM ¾ Ra >80 ¾ PF >0.9 ¾ Working temperature: -15℃ ~50℃
¾ Aluminum lamp body ¾ Clear PC diffuser ¾ Silicone rubber gasket ¾ Powder coating finish ¾ LED 0.5Wx16 /800Lm ¾ Ra >80 ¾ PF >0.9 ¾ Working temperature: -15℃ ~50℃
¾ Die-casting aluminum lamp body ¾ Opal PC diffuser ¾ Silicone rubber gasket ¾ Powder coating finish ¾ LED 1Wx6 / 540Lm ¾ Ra >80 ¾ PF > 0.9 ¾ Working temperature: -15℃ ~50℃
Description
Description
Description
Item: Y0302
Item: Y0303
Item: Y0304
175www.liteharbor.com
OUTDOOR LIGHT
¾ Material Housing: Brushed aluminum (316 and 304 stainless steel materials also available.)
¾ Lampshade Material: Acrylic ¾ Voltage: 120-277V ¾ Socket: E26/ E27 socket ¾ Light output: LED 11W max. ¾ IP Rated: IP 43 ¾ Dimensions: Height: 60cm
Diameter: 78mmBase Diameter: 132mm
¾ Available in white, black or bronze die-cast aluminum. 316 stainless steel is also available ¾ Custom finishes available by special order. ¾ 1" diameter machined aluminum stem with 1/2" NPT threads at each end. Stem length available in 24", 36" and 48" lengths
¾ 90 degree adapter provides transition from fixture to stem. ¾ High temperature silicone O-ring set screw provides water tight seal. ¾ Easy re-lamping with lamp cover secured by a flush tamper-proof aiming and 360 degree of horizontal rotation
¾ Integral knuckle provides 196 degree of vertical ¾ Tamper proof socket head screws ensures precise aiming ¾ Lamp cover is sealed with a static O-ring. ¾ Tempered glass lens is standard. ¾ 1/2" pipe thread for mounting to junction box
¾ Lumens: 350lm / 400lm ¾ Wattage: 5W ¾ Color Temperature: 3000K, 6000K ¾ CRI: >80 ¾ Input Voltage: 12V AC/DC ¾ Efficiency: 70 lm/W, 80lm/W ¾ Beam Angle: 60° / 40° ¾ IP Rating: IP65 ¾ LED Quantity: 1 COB ¾ Dimensions: 2.8" x 3.6" x 6.3" ¾ Approvals: CE / RoHS
¾ In Ground Garden Spike LED Light is great for industrial, commercial other LED projects.
Brushed Aluminum Bollard Light
Adjustable Garden Light with Spike
Features
Application
Item: Y0305
Item: Y0903
176 www.liteharbor.com
OUTDOOR LIGHT
¾ Available in white, black or bronze die-cast aluminum. 316 stainless steel is also available
¾ Custom finishes are available by special order ¾ Tamper proof socket head screws ensures precise aiming ¾ Lamp cover is sealed with a static O-ring ¾ Tempered glass lens is standard ¾ 25 pcs LEDs, 25 Watt ¾ IP67 Rated
¾ Power: 30W/ 50W/ 100W ¾ LED Qty: 1PCS COB ¾ Luminous Flux>100LM/W ¾ Color temperature: 2700K-6500K ¾ PF >0.9 ¾ IP grade: IP65
¾ Die-casting aluminum crust ¾ High intensity toughened glass cover ¾ High-purity aluminum reflector ¾ Single high powerful LED light source ¾ High efficiency LED driver
Item No. ProductSpecifications
Input Voltage
Output Current Brightness Waterproof
DGL-F030 LED 30W85-
265VAC
3000mA >3000LMIP65DGL-F050 LED 50W 3000mA >3000LM
DGL-F100 LED 100W 3000mA >10000LM
LED Garden Light
Fixture
Materials
Technology Data
Item: Y0904
177www.liteharbor.com
OUTDOOR LIGHT
¾ Power: 120W ¾ LED Qty: 25 Pieces ¾ Luminous Flux> 100LM/W ¾ Color temperature: 2700K-6500K ¾ PF >0.9 ¾ IP grade: IP65
¾ Die-casting aluminum crust ¾ High intensity toughened glass cover ¾ Single high powerful LED light source ¾ High efficiency LED driver
¾ Power: 200W/ 140W ¾ LED Qty: 2PCS COB ¾ Luminous Flux>10000LM ¾ Color temperature: 2700K-3300K, 5700-6300K ¾ Beam angle: 120 degree ¾ PF >0.9 ¾ IP grade: IP65
¾ Die-casting aluminum crust ¾ High intensity toughened glass cover ¾ High-purity aluminum reflector ¾ Single high powerful LED light source ¾ High efficiency LED driver
¾ Factories ¾ Gymnasiums ¾ Yards ¾ Advertising boards ¾ Buildings ¾ Lawns ¾ Garden designs ¾ Some other outdoor places where need flood lighting and lights decoration.
Item No. Product Specifications
Input Voltage
Output Current Brightness Waterproof
DGL-F200 LED 200W 85-265VAC 3000mA 10000- 18000LM IP65DGL-F140 LED 140W 85-265VAC 3000mA 10000-12000LM IP65
120W Adjustable LED Flood LightFixture
Materials
High Brightness LED Flood Light
Materials
Application
Technology Data
Item: DGL-F120
178 www.liteharbor.com
OUTDOOR LIGHT
¾ Housing is made of die-cast aluminum good heat dissipation ¾ White, black, silver finish are available, other special finish please confirm with factory ¾ Special outdoor powder coating ensure good corrosion resistance ¾ High power and good quality reflector bring you superior lighting conditions ¾ IP65 ¾ Idea for gymnasium, super market, residential housings outdoor projects and so on. It will bring you a colorful and beautiful world
¾ Tempered glass safe to use
¾ Multiple light colors can make a colorful world ¾ Can be used with a RGB controller which can bring you more colorful effects ¾ Energy saving and environment friendly ¾ Easy installation
¾ Epistar LED chips ¾ Length of wire doing according to customers' needs ¾ Input: 120V-277V ¾ Wattage Output: 5W/ 5*3W ¾ Quantity of LEDS: 5pcs ¾ Working temperature:-20-55℃
¾ Aluminum Led Wall Washer ¾ This product is mainly used for decorating and highlighting in building frame, garden, etc. ¾ It can work in independent mode and DMX mode, which can generate various color changing effects
¾ Such as flashing, fading, steady, seven color jumping synchronously etc. ¾ DMX256 class gray degree dimmer, ¾ DMX programmable (thousands of effects available if many lights being connected together)
¾ LED Source: 36PCS 1W Leds; 36PCS 2W LEDs ¾ Input Power Consumption: 55 Watts ¾ Beam Angel: 30 degree ¾ Project Distance: 30m ¾ Size: L343*W152*H214mm ¾ Material of Shell: Aluminum Alloy ¾ Weight: 5.0kgs ¾ Rotary Angle: Vertical (-45 degree centigrade-+ 90 degree centigrade) Horizontal ( -90 degree centigrade -+90 degree centigrade )
¾ Input Voltage: 110V-256V AC Operating Voltage 24V DC ¾ Protection Rating: IP65 ¾ Operating Temperature: -20 degree centigrade~ 40 degree centigrade
¾ Independent Mode ¾ DMX Mode ¾ Master/Slave Mode
¾ Flashing ¾ 9 Level Brightness ¾ Fading ¾ Control Mode: Independent mode: choose the effects that you need by button on the back of lighting;
¾ Master/slave: DMX mode: International standard DMX512 signal control (3XLR or standard 5XLR)
High Lumen LED Spot Light
Features
LEDs
LED Building Wall Wash Lighting
Structure and Specification
Working Mode
Function
Item: L0810
Item: L0228
179www.liteharbor.com
OUTDOOR LIGHT
Single color system
Full color system
Cable less than 100m Note:DMX512 intelligent control
AC85-265V
AC85-265V
AC85-265V
AC85-265V
AC85-265V
¾ Housing is made of die-cast aluminum good heat dissipation ¾ White, black, silver finish are available, other special finish please confirm with factory
¾ Special outdoor powder coating ensure good corrosion resistance ¾ High power and good quality reflector bring you superior lighting conditions ¾ IP65 ¾ Idea for gymnasium, super market, and residential housings outdoor projects and so on. It will bring you a colorful and beautiful world
¾ Angle beam of reflector 15 degree
¾ Multiple light colors can make a colorful world ¾ Can be used with a RGB controller which can bring you more colorful effects ¾ Using OSRAM LED chips ¾ Energy saving and environment friendly ¾ Easy installation
¾ Quantity of LED 18pcs 0.5m/ 36pcs 1m
¾ Working temperature:-20-55℃ ¾ Color Temperature: 2700-6500K
¾ Wattage Output:
High Power LED RGB Flood Light 0.5m/ 1m
Features
LEDs
Item: L0336
36W (Item: L0336)72W (Item: L0336A)
180 www.liteharbor.com
OUTDOOR LIGHT
¾ Housing is made of die-cast aluminum good heat dissipation ¾ White, black, silver finish are available, other special finish please confirm with factory
¾ Special outdoor powder coating ensure good corrosion resistance ¾ High power and good quality reflector bring you superior lighting conditions ¾ IP65 ¾ Idea for gymnasium, super market, residential housings outdoor projects and so on. It will bring you a colorful and beautiful world
¾ Angle beam of reflector 15 degree
¾ Multiple light colors can make a colorful world ¾ Can be used with a RGB controller which can bring you more colorful effects ¾ Using OSRAM LED chips ¾ Energy saving and environment friendly ¾ Easy installation
¾ Quantity of LED 18pcs 0.5m/36pcs 1m ¾ Input Volt.: 85-265VAC ¾ Wattage Output:
¾ Working temperature:-20-55℃ ¾ Color Temperature: 2700-6500K
High Power LED Flood Light 0.5m/ 1m
Features
LEDs
Single color system
Full color system
Item: L0340
18W (Item: L0340)36W (Item: L0341)
Cable less than 100m Note:DMX512 intelligent control
AC85-265V
AC85-265V
AC85-265V
AC85-265V
AC85-265V
181www.liteharbor.com
OUTDOOR LIGHT
Single color system
Full color system
¾ Housing is made of die-cast aluminum good heat dissipation ¾ White, black, silver finish are available, other special finish please confirm with factory
¾ Special outdoor powder coating ensure good corrosion resistance ¾ High power and good quality reflector bring you superior lighting conditions ¾ IP65 ¾ Ideal for gymnasium, super market, residential housings outdoor projects and so on. It will bring you a colorful and beautiful world
¾ Glass cover
¾ Multiple light colors can make a colorful world ¾ Can be used with a RGB controller which can bring you more colorful effects ¾ Using Epistar LED chips ¾ Energy saving and environment friendly ¾ Easy installation
¾ Epistar LED chips ¾ Length of wire doing according to customers' needs ¾ Input: 120V-277V ¾ Wattage Output: 3W ¾ Quantity of LEDs: 50pcs ¾ Working temperature:-20-55°C
Mini LED Spot Light
Features
LEDs
Item: L1627
Cable less than 100m Note:DMX512 intelligent control
AC85-265V
AC85-265V
AC85-265V
AC85-265V
AC85-265V
182 www.liteharbor.com
OUTDOOR LIGHT
Single color system
Full color system
Cable less than 100m Note:DMX512 intelligent control
AC85-265V
AC85-265V
AC85-265V
AC85-265V
AC85-265V
¾ SMD RGB 5050 led chip ¾ DMX512 or SD Card digital tube is an RGB tube light suitable for indoor and outdoor decorative
applications. ¾ Can achieve effects of full-color running water, chasing and scanning. Depending on the different
installation methods may compose different dynamic effect of different color's character and design.
¾ The DMX addresses can be set automatically, solving the trouble of setting DMX address manually in a project.
¾ Comes in different lengths up to 210cm ¾ Guarantees light homogeneity and no dark zones between fixtures ¾ PC housing with anodized surface finish, ivory white PC diffuse available ¾ A combination of a aluminum shell and PCB board ¾ 4 spell line with blue, green, yellow, red color, with 48 PCS 5050 RGB LED with 4pcs TM1812 IC ¾ An ideal choice for linear lighting and building decorations. Compatible with universal DMX512
protocol standard, which can be controlled by any DMX devices; each tube can be divided into 1, 2, 6, 8, or 16 pixels as per typical requirements, introducing an eye-catching new element to the designer's toolbox for optical effects.
Description L0386 (1M) L0386A (0.5M)Input voltage 24/12Vdc 24/12Vdc
Wattage 12W 6WLED type 5050RGB 5050RGBLED Q’ty 48pcs 24pcs
Number of segments 4 segments 2 segmentsLife Span 50000h 50000hIP Rated IP67 IP67
Working temperature -30-+50 Celsius -30-+50 CelsiusOperating humidity 10-90% RH 10-90% RH
Dmx Digital LED Tube Light IP67Item: L0386
183www.liteharbor.com
OUTDOOR LIGHT
¾ Robust structure elegant appearance and high durability from high intensity die cast aluminum housing;
¾ Powder coating finish for reliable operation in atrocious weather, suitable for outdoor use;
¾ Optic effective high purity anodized aluminum reflector ensuring high luminous flux output;
¾ Waterproof superior silica gel gasket for optimal ingress protection and heat resistance above 250°;
¾ Clear diffuser in toughened glass for high light transmittance and heat resistance above 200°;
¾ Stainless steel fastens screw for easy installation and maintenance; ¾ IP65 Rated and class 1 electrical.
Round Wall Light
Item: Y0512
Item: Y0513
Item: Y0514
Lamp
Lamp
Lamp
Length (mm)
Length (mm)
Length (mm)
Socket
Socket
Socket
A19/A60
A19/A60
A19/A60
Φ108
Φ114
Φ118
E26/E27
E26/E27
E26/E27
184 www.liteharbor.com
OUTDOOR LIGHT
¾ Small scale wall mounted cylinder designed for illumination on vertical walls or column surface
¾ The 316 stainless steel is of marine grade quality and has superior corrosion resistance ¾ Die-cast aluminum is available is powder-coated white, black or bronze ¾ Customer powder coat finishes are available. Consult factory ¾ Toughened glass cover, IP65 rated
¾ Die cast aluminum housing painted white/ black/ bronze/ silver for durability ¾ Gasket for water tight seal in wet locations provides IP65 rating ¾ Cover plate provided to protect housing interior during rough-in ¾ 1/2” conduit compression fittings provided for wiring ¾ 120 volts AC at 50/60Hz, 13 Watt ¾ Power factor > 0.9 at 120V input ¾ 3000K or 4100K color temperatures available ¾ Driver is thermally protected and has integral overload and short circuit protection ¾ Rated for 50,000 hours at 70% lumen maintenance
¾ Mini LED step light is designed for installation in outdoor or indoor wall mount applications ¾ Die cast aluminum housing painted white/ black/ bronze/ silver for durability ¾ Gasket for water tight seal in wet locations provides IP65 rating ¾ Cover plate provided to protect housing interior during rough-in ¾ 120 volts AC at 50/60Hz, 3 Watt ¾ Power factor > 0.9 at 120V input ¾ 3000K or 4100K color temperatures available ¾ Driver is thermally protected and has integral overload and short circuit protection ¾ Rated for 50,000 hours at 70% lumen maintenance
¾ Architectural grade aluminum with TGIC polyurethane powder coat ¾ (Black, bronze or custom). Consult factory for custom powder coat finishes
¾ LED Chip Seoul/Cree/Epistar/Samsumg/NXP/Bridgelux optional ¾ 500LM @ 5 Watt ¾ 900LM @ 9W is also available ¾ Working temperature: -20-55℃ ¾ Color Temperature: 2700-6500K
¾ Fixture is fully assembled including pre-wired driver for easy installation ¾ Mounts directly to surface using anchors and screws
LED Wall Lamp
Aluminum Construction
LEDs
Mounting
Item: Y0515
Item: Y0606
Item: Y0607
185www.liteharbor.com
OUTDOOR LIGHT
¾ The in-ground series is available in stainless steel or solid brass. ¾ The 316 marine grade stainless steel (solide brass also available) is cold worked and has superior corrosion resistance.
¾ Fixture is for use with a remote transformer (not included). ¾ Ideal for applications near the coast and other harsh environments. ¾ IP67 Rated
¾ The in-ground series is available in stainless steel or solid brass. ¾ The 316 marine grade stainless steel (solide brass also available) is cold worked and has superior corrosion resistance.
¾ Fixture is for use with a remote transformer (not included). ¾ Ideal for applications near the coast and other harsh environments. ¾ IP67 Rated
¾ 9-15V AC/DC Input ¾ High Brightness LED 8W max. ¾ Color Temperature:2700K-6000K ¾ 12° Narrow Spot, 20° Spot, 30° Narrow Flood and 40° Flood ¾ Heat Sinking: Integral to the fixture ¾ Life Span: 50,000 hours
¾ 9-15V AC/DC Input ¾ High Brightness LED 8W max. ¾ Color Temperature:2700K-6000K ¾ 12° Narrow Spot, 20° Spot, 30° Narrow Flood and 40° Flood ¾ Heat Sinking: Integral to the fixture ¾ Life Span: 50,000 hours
Lamp
HM RG R
Lamp
Item: Y0701
Item: Y0702
186 www.liteharbor.com
OUTDOOR LIGHT
¾ Y0801 is a new energy saving and environment protection luminaries designed from considering food lighting requirements and avoiding traditional lighting defects to protect a uniformity High efficiency lighting output and good uniformity.
¾ Y0801 has many special characters including used high power Cree leds,heat super-conduct material designed and intelligent power control and so on. Which make Y0801 show very excellent performance in road lighting and it mainly designed for low power consuming which will be the best choose for your path, garden etc.
¾ Streamline configuration combining with LED fittings perfectly ¾ Authentic outlook of the light is also special landscape for the city light ¾ The streamline configuration can also help to shed deposit effectively and maintain a safe temperature which guarantees low level high depreciation and longer life span
¾ Pressure die-cast aluminum alloy(ADC12) housing guarantees IP65 with high intensity ¾ Bat-wing photometric system accurately delivers rectangle light spot and insures uniform luminance with 40m interval.
¾ The heat produced by the luminaries when working is effectively taken away by natural wind flow
¾ Independent gear box has an upper cover simply and firmly locked by a rolling bar for easy installation and maintenance.
¾ PC electroplated reflector with 95% efficiency ¾ Horizontal or longitudinal arm installation ¾ Original CREE leds with high lumen efficiency. ¾ High light transmittance and constant color from superior temper glass diffuser. ¾ Reliable diver with short pretection,open-circuit protection and over-heat protection, ensuring 50000 hours life span.
¾ Cooling fins on camber back make surface area double. ¾ Those fans are even designed to be along vehicles driving direction so that wind flow produced by vehicles can takes away the heat effectively and maintains a temperature raising under 23K.
¾ Special gear box an upper cover simply and firmly locked by a rolling bar easy installation and maintenance.
¾ Input Voltage:AC85-265V ¾ Frequency:47-63Hz ¾ PF>95% ¾ THD<15%
¾ Luminous Efficiency>95lm/w ¾ CRI >80% ¾ Working Temperature:-30℃ -50℃ ¾ Life Time>50000h
LED Street Light
Product Features
Heat Dissipation
Heat dissipation
Special Gear Box
Special gear box
LEDs
Light distribution curve
CREE
Item: Y0801
Wattage Initial Luminous Flux
Constant Luminous Flux
System Consumption
100*1.5 14250lm 12525lm 170W120*1.5 17100lm 16390lm 203W
40*2 6400lm 5760lm 90W60*2 9600lm 8640lm 136W80*2 12800lm 11520lm 181W90*2 14400lm 12960lm 203W
187www.liteharbor.com
OUTDOOR LIGHT
¾ 30W Street LED Light 2400 Lumen output 30W LED power consumption Color Temperature:2700K-6000K 50,000 hours lifespan Color Index(CRI): Ra>80 Wide operating voltage: 86-250 VAC Operating temperature: -35°C to 40°C Made of aluminum and glass IP65 Rated Great for lanes, roads and parking garages
¾ 36W version, uses 30 pcs 1.15w high power LED 110-120 lumen per LED and the initial lumen for the 36W can reach 3300-3600 lumen output( With Bridgelux or CREE LED chips inside )
¾ 48W version, uses 40 pcs 1.15w high power LED 110-120 lumen per LED and the initial lumen for the 48W can reach 4400-4800 lumen output ( With Bridgelux or CREE LED chips inside ) Those two versions just use the same street light casing
¾ 60W Street LED Light 6180 Lumen output. 60W LED power consumption Color Temperature:2700K-6000K 50,000 hours lifespan Color Index(CRI): Ra>80 Wide operating voltage: 86-250 VAC Operating temperature: -35°C to 40°C Made of aluminum and glass IP65 Rated Great for sidewalks, roads and parking garages
¾ Agile & Convenient installation Environment protected, energy saved, no empoison. LED is no empoison for environment protected energy saving lighting Applicability scope: city roads, habitation areas, industrial areas, pedestrian crossing, squares, gardens, schools, villas, yards, etc
LED Street Light
Item: Y0802
189www.liteharbor.com
LED BULB
¾ Unique patented Aluminum heat sinking design ¾ Shockproof, moisture proof, anti-distortion ¾ LED Chip Seoul/Cree/Epistar/Samsumg/NXP/Bridgelux optional ¾ Real Replacement for traditional halogen bulb ¾ Lifetime is 20 times longer than incandescent ¾ Can save energy up to 80% than incandescent ¾ Mercury free, lead free and no UV ¾ Streamline configuration combining with LED fittings ¾ Perfectly and getting high heat dissipation efficiency ¾ Two-year limited warranty ¾ UL Number: E468917
Item No. LED (pcs) Input Volt Watt(W) CCT(K) Lumen(lm) Beam Angle Avg. Life(hours) CRI DimmableDGL-MR16-01 6 12V AC/DC 7 2700-7000 520 36° 30000 >82 YesDGL-GU10-01 6 85-265V AC 7 2700-7000 520 36° 30000 >82 YesDGL-HR16-01 6 85-265V AC 7 2700-7000 520 36° 30000 >82 YesDGL-PA20-01 5 85-265V AC 10 2700-7000 580-630 33° 30000 >82 YesDGL-PA30-01 8 85-265V AC 16 2700-7000 960-1100 30° 30000 >82 YesDGL-PA38-01 10 85-265V AC 24 2700-7000 1320-1450 30° 30000 >82 Yes
Item No. Input Volt Watt(W) CCT(K) Lumen(lm) Beam Angle Avg. Life(hours) CRI DimmableDGL-MR16-02 12V AC/DC 8 2700-7000 520 36° 30000 >82 YesDGL-GU10-02 85-265V AC 8 2700-7000 520 36° 30000 >82 YesDGL-HR16-02 85-265V AC 8 2700-7000 520 36° 30000 >82 YesDGL-PA20-02 85-265V AC 8 2700-7000 580 36° 30000 >82 YesDGL-PA30-02 85-265V AC 14 2700-7000 1000 36° 30000 >82 YesDGL-PA38-02 85-265V AC 22 2700-7000 1400 36° 30000 >82 Yes
Item No. Input Volt Watt(W) CCT(K) Lumen(lm) Beam Angle Avg. Life(hours) CRI DimmableDGL-BR20-03 85-265V AC 8 2700-7000 500 120° 30000 >82 YesDGL-BR30-03 85-265V AC 12 2700-7000 900 120° 30000 >82 YesDGL-BR40-03 85-265V AC 18 2700-7000 1250 120° 30000 >82 Yes
Product Description
DGL-MR16-01
DGL-MR16-02
DGL-BR20-03
DGL-GU10-01
DGL-GU10-02
DGL-BR30-03
DGL-HR16-01
DGL-HR16-02
DGL-BR40-03
DGL-PA20-01
DGL-PA20-02
DGL-PA30-01
DGL-PA30-02
DGL-PA38-01
DGL-PA38-02
Die-Casting Series
COB Series
BR Series
190 www.liteharbor.com
LED BULB
¾ Diffuser: Polycarbonate ¾ Base Material: Ceramic ¾ Electric Current Type: AC ¾ Standard H: 105mm Dia: 37mm ¾ Life-span: 30000H ¾ Total Power: 3.1W ¾ Efficiency: ≥ 85% ¾ Color Rendering Index (CRI): ≥ 75% ¾ Input Current: 280-290mA ¾ Operating Temperature: -25° - 60° ¾ Beam angle: 120° 20lm/SMD ¾ White Ceramic ring, Frosted glass cover
¾ LED Chip Seoul/Cree/Epistar/Samsumg/NXP/Bridgelux optional ¾ Can save energy up to 80% than incandescent ¾ Voltage: 10-30V DC/ 110-240V AC ¾ Luminous flux: 300-350lm ¾ Color temperature: 2800-7000K ¾ Base: G9 ¾ Beam Angle: 120° ¾ PF> 0.9 ¾ CRI> 85%
Color Temperature 6000K~6500K 4000K~4500K 2700K~3000KLED Brand Seoul/Cree/Epistar/Samsumg/NXP/Bridgelux optional
Voltage AC220~240V / 110~130VLumen 290lm ± 10%
Lamp Base E27, E26, E14, B22LED Qty 35
LED Source SMDBeam Angle 120°
Replace 45 watts of tungsten lamp
Product Description
Product Description
Model: DGL-E14-C001
Model: DGL-G9
191www.liteharbor.com
LED TUBE
¾ Using integration aluminum pipe structure, good appearance, good heat dissipating capacity ¾ Liteharbor T5 LED Tubes are energy efficient, environmentally friendly ¾ No flicker, start quickly, soft light, protect your eyes ¾ The LED T5 tubes are assembled with SMD 3528, high light efficiency, long life span ¾ Isolated power supply is embedded safely inside the LED tube ¾ Built-in 12VDC/12VAC constant current driver, high efficiency, stability ¾ Linkable connector, easy to install and use ¾ Energy saving up to 80% ¾ Quick response time, the LED response time is nanosecond
¾ Cut off the original line power before installation ¾ Led tube lights can be installed directly with 12- VDC or 12VAC power (Higher DC/AC forbidden) ¾ Non-professionals should not disassemble the LED lamp by themselves, including replace of the PC cover ¾ Damage by corrosion will not be honored as materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents, such as moisture, condensation and other harmful elements.
¾ Pay attention not to exceed the maximum operation temperature 65℃ at Tc point when the modules are used in enclosed environment ¾ Pay attention to standard ESD precautions when installing the module ¾ If there is any unusual problem when using, please contact us. The product couldn't be open optionally, or no warranty for it
Item No. Length Wattage
LH-T5-3-VDC 310mm 3WLH-T5-6-VDC 570mm 6WLH-T5-9-VDC 870.5mm 9WLH-T5-12-VDC 1170.5mm 12WLH-T5-15-VDC 1475mm 15W
Fitting T5 Lumen 235Wattage 3/6/9/12/15W CRI >80%Voltage 8-16VDC/9-15VAC Typical Efficiency 70 lm/wAvg. Life 50000 Hours PF >0.9
Color Temperature2700K-3500K Warm White
3500K-5000K Natural White5000K-6500K Cool White
Diameter 310*28*33.5 mmLEDs 48pcs
Dimmable NoWarranty 2 years
Life Frequency 50-60Hz Beam Angle 120 degreeOperating Temp -20-65 Celsius Degree Certificate RoHS/CE
Description
Relative Spectral Energy Distribution
Safety Instruction
Series Choices
Specification
Mounting Bracket 3-Wire Linkable Connector
192 www.liteharbor.com
LED TUBE
¾ Light source: super-bright 3528 SMD LED, emitting higher brightness at lower cost, the light looks nicer and safer, superior to traditional tube ¾ Good circuit design to get high power factor, over 0.99 on AC110V ¾ Environmental friendly clear PC cover and aluminum sheet housing gives good heat management ¾ Energy saving up to 70% ¾ Different lengths available: 60cm, 90cm, 120cm, 150cm ¾ Color temperature can be offered as customer demands ¾ Maintain free, no ballast or starter needed ¾ CE, RoHS, UL compliant
¾ Aluminum board to solve heat emission ¾ 3 years warranty ¾ Constant, isolated power supply ¾ UL/TUV/PSE/CE/FCC Certification ¾ Material:1/2 aluminum, 1/2 frost/transparent PC cover ¾ Body size: 26×1214mm ¾ LED quantity: 288pcs ¾ Work voltage: AC100-285V ¾ Power consumption: 16w/18w ¾ Work temperature:-20℃ -40℃ ¾ Color of light source: White ¾ Beam angle: 120° ¾ Color temperature: 5500-7000K ¾ Color rendering: >70/75 ¾ Luminous Flux: Luminous Flux: frost-1390lm/1620lm transparent: 1530lm/1780lm ¾ Lifespan: 50000 hours ¾ High intensity; low heat; no flicking ¾ No UV and IR radiation ¾ OEM available
¾ Supermarket, Hotels, Hospitals ¾ Factories & Offices ¾ Residential / Institution Buildings ¾ Icebox Showcase ¾ Schools, Colleges & Universities
Item DGL-T8Length 4ft
Main Materials PC+ AluminumNormal Input Voltage 110V-277VAC
Color of LED Daylight WhiteLED SMD
LED Q'TY 288 PCSPower Consumption 18W
LED View Angle 120 DegreeWorking Temp -30°C~+50°C
Lifespan 50000 hoursBody Size 26×1214mmMaterial 1/2 Aluminum, 1/2 Frost/Transparent PC CoverDriver Constant, Isolated Power Supply
Description
Specification
Application
193www.liteharbor.com
LED TUBE
¾ T10 1.2m LED tube, the power is 18W which can replace traditional tube's power is 38w-45w. Therefore, the former saves energy above 60%
¾ The light source is the low lighting dissipation and high-bright LED. The dissipation is less than 30% during 18000 hours (12-hour working per day), and less than 50% during 30000 hours
¾ Large-size LED chip and the light transmittance efficiency can reach 92 Lm/w
¾ While working, no ultraviolet light and infrared light radiation And doesn't contain hazardous substance, such as Mercury
¾ The LED lights lifespan can reach above 30000 hours
¾ LED fluorescent tube, adopt constant current power supply, no flashing, no harm for eyes
¾ Anti-vibration, not easy to be broken
ITEM NO. DGT-2210006 DGT-221812LED Power 10W 18WInput Volt 85-265V AC 50-60Hz
Luminous Flux 950LM 1500LMLED Quantity 153 288Power Factor >93% >93%
CRI >80% >80%Color Temperature 2700K-3500K Warm White,3500K-5000K Natural White,5000K-6500K Cool White
Material Aluminum housing &+PC Clear/Frosted diffuserDimension D30*L600mm D308*L1200mm
Operating Temperature -40 celsius degree~ 40 celsius degreePacking 50pcs/carton 65.5*41.5*23CM 25pcs/carton 127*23*23.5cm Weight N.W./G.W. 11.3KG/13.5KG N.W./G.W. 11.3KG/13.5KG
Luminous Intensity(3m) 3m high luminous intensity 96 Lux 3m high luminous intensity 175 LuxLuminous Intensity(2m) 2m high luminous intensity 300 Lux 2m high luminous intensity 315 Lux
Replacement Power for Traditional Tube 18-20W 36-40W
Energy-saving
Lowest dissipation
High-brightness
Environment protection
Long lifespan
Eyes protection
Anti-vibration
Main Technical Parameter
195www.liteharbor.com
PENDANT LIGHT
DE001
DE006
DE011
DE016
DE002
DE007
DE012
DE017
DE003
DE008
DE013
DE004
DE009
DE014
DE005
DE010
DE015