LINKSYS Wusb54gsc Wireless-G LINKSYS by Cisco

7/28/2019 LINKSYS Wusb54gsc Wireless-G LINKSYS by Cisco

1/38

USER GUIDE

Compact Wireless-G

USB Network Adapter

with SpeedBooster

Model:WUSB54GSC


2/38

About This Guide

iCompact Wireless-G USB Network Adapter with SpeedBooster

About This Guide

Icon Descriptions

While reading through the User Guide you may see

various icons that call attention to speciic items. Below isa description o these icons:

NOTE: This check mark indicates that there isa note o interest and is something that youshould pay special attention to while using theproduct.

WARNING: This exclamation point indicatesthat there is a caution or warning and it issomething that could damage your property orproduct.

WEB: This globe icon indicates a noteworthywebsite address or e-mail address.

Online Resources

Website addresses in this document are listed withouthttp:// in ront o the address because most current webbrowsers do not require it. I you use an older web browser,you may have to add http:// in ront o the web address.

Resource Website

Linksys www.linksys.com

Linksys International www.linksys.com/international

Glossary www.linksys.com/glossary

Network Security www.linksys.com/security

Copyright and Trademarks

Linksys, Cisco and the Cisco Logo areregistered trademarks or trademarkso Cisco Systems, Inc. and/or itsailiates in the U.S. and certain othercountries. Copyright 2008 CiscoSystems, Inc. All rights reserved.Other brands and product names aretrademarks or registered trademarkso their respective holders.


3/38

Table of Contents

iiCompact Wireless-G USB Network Adapter with SpeedBooster

Chapter 1: Product Overview 1

LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Chapter 2: Wireless Security Checklist 2

General Network Security Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Additional Security Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Chapter 3: Advanced Confguration 3

How to Access the Wireless Network Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

How to Use the Wireless Network Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Link Inormation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Profles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Appendix A: Troubleshooting 14

Appendix B: Windows Vista Zero Confguration 15

Windows Vista Confguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

New Wireless Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Appendix C: Windows XP Wireless Zero Confguration 18

Windows XP Wireless Zero Confguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Appendix D: Specifcations 20

Appendix E: Warranty Inormation 21

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Exclusions and Limitations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Obtaining Warranty Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Appendix F: Regulatory Inormation 23

FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Saety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Avis dIndustrie Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Wireless Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Avis de non-responsabilit concernant les appareils sans fl . . . . . . . . . . . . . . . . . .24

User Inormation or Consumer Products Covered by EU Directive 2002/96/EC on WasteElectric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Appendix G: Sotware License Agreement 29

Sotware in Linksys Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Sotware Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29


4/38

Chapter 1 Product Overview

1Compact Wireless-G USB Network Adapter with SpeedBooster

Chapter 1:Product Overview

Thank you or choosing the Compact Wireless-G USBNetwork Adapter with SpeedBooster. With this Adapter,

your wireless networking experience will be aster andeasier than ever.

Using the latest wireless networking technology, theAdapter adds or upgrades wireless connectivity onyour notebook computer. To help protect your data andprivacy, you can use industrial-strength WPA2 encryptionto protect your wireless connection. The included SetupWizard will walk you through coniguring the Adapter toyour networks settings, step by step.

LED

Link (Green) The LED lashes when there iswireless network activity.


5/38

Chapter 2 Wireless Security Checklist


Chapter 2:Wireless Security Checklist

Wireless networks are convenient and easy to install, sohomes with high-speed Internet access are adopting them

at a rapid pace. Because wireless networking operates bysending inormation over radio waves, it can be morevulnerable to intruders than a traditional wired network.Like signals rom your cellular or cordless phones, signalsrom your wireless network can also be intercepted. Sinceyou cannot physically prevent someone rom connectingto your wireless network, you need to take some additionalsteps to keep your network secure.

1. Change the default wirelessnetwork name or SSID

Wireless devices have a deault wireless network nameor Service Set Identiier (SSID) set by the actory. Thisis the name o your wireless network, and can be upto 32 characters in length. Linksys wireless productsuse linksys as the deault wireless network name. Youshould change the wireless network name to somethingunique to distinguish your wireless network rom otherwireless networks that may exist around you, but do notuse personal inormation (such as your Social Securitynumber) because this inormation may be available oranyone to see when browsing or wireless networks.

2. Change the default password

For wireless products such as access points and routers,you will be asked or a password when you want to changetheir settings. These devices have a deault password setby the actory. The Linksys deault password is admin.Hackers know these deaults and may try to use themto access your wireless device and change your networksettings. To thwart any unauthorized changes, customizethe devices password so it will be hard to guess.

3. Enable MAC address filtering

Linksys routers give you the ability to enable Media AccessControl (MAC) address iltering. The MAC address is aunique series o numbers and letters assigned to everynetworking device. With MAC address iltering enabled,wireless network access is provided solely or wirelessdevices with speciic MAC addresses. For example, you canspeciy the MAC address o each computer in your homeso that only those computers can access your wirelessnetwork.

4. Enable encryption

Encryption protects data transmitted over a wirelessnetwork. Wi-Fi Protected Access (WPA/WPA2) and WiredEquivalency Privacy (WEP) oer dierent levels o security

or wireless communication.A network encrypted with WPA/WPA2 is more securethan a network encrypted with WEP, because WPA/WPA2uses dynamic key encryption. To protect the inormationas it passes over the airwaves, you should enable thehighest level o encryption supported by your networkequipment.

WEP is an older encryption standard and may be theonly option available on some older devices that do notsupport WPA.

General Network Security GuidelinesWireless network security is useless i the underlyingnetwork is not secure.

Password protect all computers on the network andindividually password protect sensitive iles.

Change passwords on a regular basis.

Install anti-virus sotware and personal irewallsotware.

Disable ile sharing (peer-to-peer). Some applicationsmay open ile sharing without your consent and/or

knowledge.

Additional Security Tips

Keep wireless routers, access points, or gateways awayrom exterior walls and windows.

Turn wireless routers, access points, or gatewayso when they are not being used (at night, duringvacations).

Use strong passphrases that are at least eight charactersin length. Combine letters and numbers to avoid usingstandard words that can be ound in the dictionary.

WEB: For more inormation on wirelesssecurity, visit www.linksys.com/security


6/38

Chapter 3 Configuration


Chapter 3:Advanced Configuration

For Windows 2000 and Windows XP users, advancedconiguration is perormed through the Wireless Network

Monitor (the Monitor). Windows Vista users should reer toAppendix B: Windows Vista Wireless Zero Configuration.

Use the Advanced Coniguration eature to check the linkinormation, search or available wireless networks, orcreate proiles that hold dierent coniguration settings.

Diagnostics are perormed through the Diagnostic utility.Use it to detect the Adapter, test the driver and Monitor,and troubleshoot i needed.

How to Access the Wireless Network

Monitor

Ater installing the Adapter, the Monitor icon appears inthe system tray o your computer. I the Monitor is enabled,the icon is green. I the Monitor is disabled or the Adapteris not inserted, the icon is gray.

Wireless Network Monitor Icon

Double-click the icon to open the Monitor.

How to Use the Wireless Network MonitorThe opening screen o the Monitor is the Link Informationscreen. From this screen, you can ind out how strong thecurrent wireless signal is and how good the connectionsquality is. Click More Information to view additionalstatus inormation about the current connection. To searchor available wireless networks, click the Connect tab.To perorm coniguration changes or create connectionproiles, click the Profiles tab.

Link Inormation

The Link Information screen displays network mode, signalstrength, and link quality inormation about the currentconnection. ClickMore Information or additional statusinormation.

Link Inormation

Ad-Hoc Mode or Infrastructure Mode The screenindicates whether the Adapter is currently working in ad-hoc or inrastructure mode.

Signal Strength The Signal Strength bar indicates signalstrength.

Link Quality The Link Quality bar indicates the quality othe wireless network connection.

Click More Information to view additional inormationabout the wireless network connection on the WirelessNetwork Status screen.

Wireless Network Status

The Wireless Network Status screen provides inormationon your current network settings.

Wireless Network Status


7/38



Status This shows the status o the wireless networkconnection.

SSID This is the unique name (SSID) o the wirelessnetwork.

Wireless Mode This is the mode o the wireless networkcurrently in use.

Transfer Rate This is the data transer rate o the currentconnection.

Channel This is the channel used by your wirelessnetwork.

Security This is the status o the wireless securityeature.

Authentication This is your wireless networksauthentication method.

IP Address This is the IP Address o the Adapter.

Subnet Mask This is the Adapters Subnet Mask.

Default Gateway This is the Deault Gateway address.

DNS This is the DNS address o the Adapter.

DHCP Client This displays the Adapters status as a DHCPclient.

MAC Address This is the MAC address o the wirelessnetworks wireless router or access point.

Signal Strength The Signal Strength bar indicates thesignal strength.


ClickBackto return to the initial Link Information screen.Click Statistics to go to the Wireless Network Statisticsscreen. ClickSave to Profile to save the currently activeconnection settings to a proile.

Wireless Network Statistics

The Wireless Networks Statistics screen provides statisticson your current network settings.

Wireless Network Statistics

Transmit Rate This is the data transmission rate othe current connection. (In Auto mode, the Adapterdynamically shits to the astest data transmission rate atany given time.)

Receive Rate This is the rate that the Adapter receivesdata.

Packets Received This shows the packets that theAdapter receives, in real time, ater connecting to thewireless network or ater clicking Reresh.

Packets Transmitted This shows the packets that theAdapter transmits, in real time, ater connecting to thewireless network or ater clicking Reresh.

Bytes Received This shows the bytes that the Adapterreceives, in real time, ater connecting to the wirelessnetwork or ater clicking Reresh.

Driver Version This shows the Adapters driver version.

Noise Level This shows the level o background noisethat aects the wireless signal. A lower reading translatesinto a higher quality signal.

Signal Strength This is the intensity o the wireless signal

that the Adapter receives.

Up Time This indicates the length o the most recentconnection to a wireless network.

Total Up Time This indicates the cumulative total o theAdapters connection time.

Signal Strength The Signal Strength bar indicates thesignal strength.



8/38



Click Back to return to the initial Link Informationscreen. ClickStatus to go to the Wireless Network Statusscreen. ClickSave to Profile to save the currently activeconnection settings to a proile. ClickRefresh to reset thestatistics.

Site SurveyThis screen displays a list o available networks in the tableon the let. You may click SSID, CH (Channel), or Signaltosort by that ield.

SSID This is the SSID or unique name o the wirelessnetwork.

CH This is the channel that the network uses.

Signal This is the percentage o signal strength, rom 0to 100%.

Site Survey

Site Inormation

For each network selected, the ollowing settings arelisted:

SSID This is the SSID or unique name o the wirelessnetwork.


Channel This is the channel to which the wireless networkdevices are set.

Security This is the status o the wireless securityeature.

MAC Address This is the MAC address o the wirelessnetworks wireless router or access point.

Refresh Click Refresh to perorm a new search orwireless devices.

Connect To connect to one o the networks on the list,select the wireless network, and click Connect. I thenetworks wireless security is enabled, then you will viewthis screen:

Click Continue

Make sure you have the security settings o your wireless

network, and then clickContinue.Proceed to the instructions or the wireless security screenyou see:

WEP (Wired Equivalent Privacy)

I the network has WEP encryption enabled, then you seethe WEP Key Needed for Connection screen.

WEP Security

WEP Select 64-bit or 128-bit encryption.Passphrase Enter the networks Passphrase, so aWEP key is automatically generated. The passphrase iscase-sensitive and must be 16 or ewer alphanumericcharacters. It must match the passphrase o your otherwireless network devices and is compatible with Linksyswireless products only. (For non-Linksys wireless products,enter the WEP key manually.)


9/38



WEP Key 1 I you do not have the Passphrase, enterthe WEP key, which must match the WEP key o yourwireless network. For 64-bit encryption, enter exactly 10hexadecimal characters (0 to 9 and A to F.) For 128-bitencryption, enter exactly 26 hexadecimal characters.

To connect to the network, clickConnect. To cancel the

connection, clickCancel.

WPA (Wi-Fi Protected Access)

I the network has WPA Personal security enabled, thenyou see the WPA Personal Needed for Connection screen.

WPA-Personal Security

Encryption Select the type o algorithm you want to use,TKIP or AES.

Passphrase Enter the networks Passphrase (Pre-SharedKey) o 8-63 characters.

To connect to the network, clickConnect. To cancel theconnection, clickCancel.

WPA2 (Wi-Fi Protected Access 2)

I the network has WPA2 Personal security enabled, thenyou see the WPA2 Personal Needed for Connection screen.

WPA2-Personal Security

Passphrase Enter the networks Passphrase (Pre-SharedKey) o 8-63 characters.

To connect to the network, clickConnect. To cancel theconnection, clickCancel.

Proiles

The Profiles screen lets you save dierent conigurationproiles or dierent network setups. The table on the letdisplays a list o available proiles with their proile namesand wireless network names.

Proiles

Profile This is the name o the proile.

SSID This is the SSID or unique name o the wireless

network.

Proile Inormation

For each proile selected, the ollowing are listed:


Transfer Rate This is the transer rate setting..

Channel This is the channel used by your wirelessnetwork.

Security This is the status o the wireless security.

Authentication This is the authentication setting or thenetwork.

Connect To connect to a wireless network using a speciicproile, select the proile, and clickConnect.

New Click New to create a new proile. See the nextsection, Create a New Proile, or instructions.

Edit Select the proile you want to change and clickEdit.

Import Click Import to import a proile that is saved inanother location. Select the appropriate ile, and clickOpen.


10/38



Export Select the proile you want to save in a dierentlocation, and click Export. Direct Windows to theappropriate older, and clickSave.

Delete Select the proile you want to delete and clickDelete.

NOTE: I you want to export more than oneproile, you must export them one at a time.

Available Wireless Networks

The next screen is the Available Wireless Networks screen.


The networks available to this Adapter will be listed on

this screen.Refresh Click Refresh to update the Available WirelessNetwork list.

Connect ClickConnect to connect to one o the availablenetworks.

Advanced Setup Select this option to set up the adaptermanually i your network is not listed in the AvailableWireless Network list.

The setup or each option is described, step by step, underthe appropriate heading on the ollowing pages.

ClickExit to close the Setup Wizard, i you wish to set upthe Adapter later.

ClickConnect to Networkto connect to your network.

Create a Proile

The available networks or the Proile are in the table onthe center o the screen by SSID.

Creating a Proile

I you have wireless security enabled on your network,1.continue to step 2. I you do not have wireless securityenabled, continue to step 3.

I the networks wireless security is enabled, Select2.the wireless network you wish to connect to and clickConnect. (I you do not see your network listed, youcan click Refresh to see the list.) Then you will viewthis screen:

Click Continue

Make sure you have the security settings o your wirelessnetwork, and then clickContinue.

Proceed to the instructions or the wireless security screenyou see:


11/38



WEP

I the network has WEP encryption enabled, then you seethe WEP Key Needed for Connection screen.

WEP Security

WEP Select 64-bit or 128-bit encryption.

Passphrase Enter the networks Passphrase, so aWEP key is automatically generated. The passphrase iscase-sensitive and must be 16 or ewer alphanumericcharacters. It must match the passphrase o your otherwireless network devices and is compatible with Linksyswireless products only. (For non-Linksys wireless products,enter the WEP key manually.)

WEP Key 1 I you do not have the Passphrase, enterthe WEP key, which must match the WEP key o your

wireless network. For 64-bit encryption, enter exactly 10hexadecimal characters (0 to 9 and A to F.) For 128-bitencryption, enter exactly 26 hexadecimal characters.

ClickConnect and proceed to step 3.

WPA Personal

I the network has WPA Personal security enabled, thenyou see the WPA Personal Needed for Connection screen.

WPA-Personal Security

Encryption Select the type o algorithm you want to use,TKIP or AES.

Passphrase Enter the networks Passphrase (Pre-sharedKey) o 8-63 characters.


WPA2 Personal

I the network has WPA2 Personal security enabled, thenyou see the WPA2 Personal Needed for Connection screen.

WPA2-Personal Security



Ater the proile installs, the3.Congratulations

screenappears. ClickFinish.

Congratulations

Congratulations! The profile issuccessfully configured.


12/38



Advanced Setup

I your network is not listed with the available networks,use Advanced Setup.


Click1. Advanced Setup on the Available WirelessNetworks screen to set up the Adapter manually.

The2. Network Settings screen appears.

Wireless Network

I your network has a router or other DHCP server, selectObtain network settings automatically (DHCP).

I your network does not have a DHCP server or router,select Specify network settings. Enter an IP Address,Subnet Mask, Deault Gateway, and DNS addressesappropriate or your network. You must speciy theIP Address and Subnet Mask on this screen. I you areunsure about the Deault Gateway and DNS addresses,leave these ields blank.

IP Address This IP Address must be unique toyour network.

Subnet Mask The Adapters Subnet Mask must bethe same as your wired networks Subnet Mask.

Default Gateway Enter the IP address o yournetworks Gateway.

DNS 1 and DNS 2 Enter the DNS address o yourwired Ethernet network.

ClickNext to continue, or clickBackto return to theprevious screen.

The3. Wireless Mode screen shows a choice o twowireless modes.

Wireless Mode

Infrastructure Mode Select this mode i you wantto connect to a wireless router or access point.

Ad-Hoc Mode Select this mode i you want toconnect to another wireless device directly withoutusing a wireless router or access point.

SSID Enter a wireless network name (SSID) thatmust be used or all devices in your wirelessnetwork. It is case-sensitive and should be a uniquename to help prevent others rom entering yournetwork.


I you chose Inrastructure Mode, go to step 5 now.4.I you chose Ad-Hoc Mode, the Ad-Hoc Mode Settingsscreen appears.


13/38



Ad-Hoc Mode Settings

Channel Select the correct channel or yourwireless network. I you are unsure about which

channel to use, keep the deault, Auto.Network Mode Select the network mode inwhich your wireless network will operate. In MixedMode, Wireless-B and Wireless-G devices can bothoperate on the network, though at a slower speed.In G-Only Mode, no Wireless-B devices can operatein the network.


I your wireless network does not have wireless security,5.select Disabled and then click Next to continue.Proceed to step 6.

Wireless Security

I your wireless network has wireless security, selectthe method o security used: WEP, WPA Personal,WPA2 Personal, WPA Enterprise, WPA2 Enterprise, orRADIUS. WEP stands or Wired Equivalent Privacy, andWPA stands or Wi-Fi Protected Access. WPA2 standsor Wi-Fi Protected Access 2. WPA is a stronger securitymethod than WEP. WPA2 is a stronger security method

than WPA. RADIUS stands or Remote AuthenticationDial-In User Service. Click Next to continue, or clickBackto return to the previous screen.

Proceed to the section or your security method.

WEP

Make sure the settings you conigure match the settingso your wireless network.

WEP

WEP Select 64-bit or 128-bit encryption.

Passphrase Enter the networks Passphrase, so a WEPkey is automatically generated. It is case-sensitive andshould not be longer than 16 alphanumeric characters.This passphrase must match the passphrase o your other

wireless network devices and is compatible with Linksyswireless products only. (I you have any non-Linksyswireless products, enter the WEP key manually on thoseproducts.)

WEP Key I you do not have the Passphrase, enter theWEP key o your wireless network. For 64-bit encryption,enter exactly 10 hexadecimal characters. For 128-bitencryption, enter exactly 26 hexadecimal characters. Validhexadecimal characters are 0 to 9 and A to F.

Advanced Users

TX Key The deault is 1. I your networks wireless router

or access point uses transmit key number 2, 3, or 4, selectthe appropriate number.

Authentication The deault is Open System. For OpenSystem authentication, the sender and the recipient donot share a WEP key or authentication. For Shared Keyauthentication, both the sender and the recipient share aWEP key or authentication.

Click Next to continue, or click Back to return to theprevious screen.


14/38



WPA Personal

WPA Personal oers two encryption methods, TKIP andAES, with dynamic encryption keys.

WPA Personal

Encryption Select TKIP or AES.



WPA2 Personal

WPA2 Personal uses the encryption method, AES, withdynamic encryption keys.

WPA2 Personal

Passphrase Enter the networks Passphras (Pre-sharedKey) o 8-63 characters.


WPA Enterprise

WPA Enterprise eatures WPA security used in coordinationwith a RADIUS server. (This should only be used when aRADIUS server is connected to the Router.) WPA Enterpriseoers two authentication methods, EAP-TLS and PEAP,as well as two encryption methods, TKIP and AES, withdynamic encryption keys.

Authentication Select the authentication method yournetwork is using, EAP-TLS or PEAP.

EAP-TLS

WPA Enterprise - EAP-TLS

I you selected EAP-TLS, conigure the ollowing:

Login Name Enter the login name o your wirelessnetwork.

Server Name Enter the name o the authentication server(this is optional).

Certificate Select the certiicate you installed toauthenticate you on your wireless network.

Encryption Select the type o encryption, TKIP or AES.



15/38



PEAP

WPA Enterprise - PEAP

I you selected PEAP, conigure the ollowing:Login Name Enter the login name o your wirelessnetwork.

Password Enter the password o your wireless network.


Certificate Select the certiicate you installed toauthenticate you on your wireless network. I you want touse any certiicate, keep the deault, Trust Any.

Inner Authen. Select the authentication method usedinside the PEAP tunnel.

Encryption Select the type o encryption, TKIP or AES.


RADIUS

RADIUS eatures use o a RADIUS server. (This shouldonly be used when a RADIUS server is connected to theRouter.) RADIUS oers two authentication types: EAP-TLSand PEAP.

Authentication Select the authentication method yournetwork is using, EAP-TLS or PEAP.

EAP-TLS

RADIUS - EAP-TLS

I you selected EAP-TLS, conigure the ollowing:

Login Name Enter the login name o your wirelessnetwork.


Certificate Select the certiicate you installed toauthenticate you on your wireless network.



16/38



PEAP

RADIUS - PEAP

I you selected PEAP, conigure the ollowing:Login Name Enter the login name o your wirelessnetwork.

Password Enter the password o your wireless network.


Certificate Select the certiicate you installed toauthenticate you on your wireless network. I you want touse any certiicate, keep the deault, Trust Any.

Inner Authen. Select the authentication method usedinside the PEAP tunnel.


The6. Confirm New Settings screen appears.

Conirm New Settings

To save the new settings, clickSave. To edit the newsettings, clickBack. To exit Advanced Setup throughthe Monitor, clickExit.

The7. Congratulations screen appears. ClickConnect toNetworkto implement the new settings immediatelyand return to the Link Information screen. ClickReturnto Profiles screen to keep the current settings activeand return to the Profiles screen.

Congratulations

Congratulations! The profile issuccessfully configured.


17/38

Appendix A Troubleshooting


Appendix A:Troubleshooting

Your computer does not recognize the Adapter.

Make sure that the Adapter is properly inserted into theUSB slot.

The Adapter does not work properly.

Remove the Adapter, and then reinsert it into thecomputers USB slot.

Your computer cannot communicate with the other

computers linked via Ethernet in the Inrastructure

confguration.

Make sure that the computers are powered on.1.

Make sure that the Adapter is conigured with the2.same Wireless Network Name (SSID) and wirelesssecurity settings as the other wireless computers inthe Inrastructure coniguration.

WEB: I your questions are not addressed here,reer to the Linksys website, www.linksys.com


18/38

Appendix B Windows Vista Zero Configuration


Appendix B:Windows VistaZero Configuration

Windows Vista Coniguration

Ater you have installed the Adapter, the Windows VistaWireless Network Coniguration utility icon appears onyour computers system tray.

Wireless Network Coniguration Utility Icon

When your mouse pointer hovers over the icon, the statusinormation o your wireless connection appears.

Wireless Connection Status

New Wireless Connection

To connect to a dierent wireless network:

Right-click the Wireless Network Coniguration1.utility icon.

Click2. Connect to a network.

Utility Menu

Select your network, and then click3. Connect.

Select Network

I your network has wireless security, go to step 5.4.

I your network has no wireless security, this screenappears. To connect to your unsecured network, clickConnect Anyway and go to step 7.

Unsecured Network


19/38



Enter the security key, WEP key, or passphrase (also5.known as a pre-shared key), depending on your typeo security. ClickConnect.

Secured Network

This screen appears while the Adapter connects to6.your network. Do not cancel, unless you want to endthe installation.

Connecting to Network

This screen appears when you are connected to your7.network. Select Save this network, i you want to saveyour settings. ClickClose.

Connected to Network

The8. Set Network Location screen may appear to helpapply the correct settings or your type o location.Select Home, Work, or Public location.

Select Network Location


20/38



This screen varies according to the selected location.9.ClickClose.

Network Settings Saved

NOTE: For help with the Windows Vista WirelessNetwork Confguration utility, reer to WindowsVista Help and Support, by clicking Vistas Start

button > Help and Support.

Your computer is now connected to yourwireless network.


21/38

Appendix C Windows XP Wireless Zero Configuration


Appendix C:Windows XP Wireless ZeroConfiguration

Windows XP Wireless Zero Coniguration

I your computer is running Windows XP, then this choicewill be available. I you want to use Windows XP WirelessZero Coniguration to control the Adapter, instead ousing the Wireless Network Monitor, then right-click theWireless Network Monitor icon, and select Use WindowsXP Wireless Configuration.

NOTE: I you have WPA2 wireless security, reerto Update or Windows XP (KB893357) on themicrosot.com website to be able to connect

correctly.

Wireless Network Monitor Icon

Use Windows XP Wireless Coniguration

I you want to switch back to the Wireless Network Monitor,right-click the Wireless Network Monitor icon, and selectUse Linksys Wireless Network Monitor.

Use Linksys Wireless Network Monitor

NOTE: For more inormation on Windows XPWireless Zero Coniguration, reer to WindowsHelp.

Ater installing the Adapter, the Windows XP Wireless1.Zero Coniguration icon appears in your computerssystem tray. Double-click the icon.

Windows XP Wireless Zero Coniguration Icon

The screen that appears will show any available2.wireless network. Select the network you want. ClickConnect.

I your network does not have wireless securityenabled, go to step 3.

I your network does have wireless security enabled,go to step 4.

NOTE: Steps 2 and 3 are or Windows XP withService Pack 2 installed.

Available Wireless Network

I your network does not have wireless security enabled,3.clickConnect Anyway to connect the Adapter to yournetwork.

No Wireless Security

I your network uses WEP wireless security, enter the4.WEP Key in the Network Key and Confirm networkkeyields. I your network uses WPA Personal wirelesssecurity, enter the Passphrase in the Network KeyandConfirm networkkeyields. ClickConnect.


22/38

Appendix C Windows XP Wireless Zero Configuration


Wireless Security

NOTE: Windows XP Wireless Zero Conigurationdoes not support the use o a passphrase. Enterthe exact WEP key used by your wireless routeror access point.

Your wireless network will appear as Connected when5.your connection is active.

Wireless Network Connection

For more inormation about wireless networking on aWindows XP computer, click Start > Help > Support.Enter the keyword wireless in the ield provided, andpress the Enter key.

Your computer is now connected to yourwireless network.


23/38

Appendix D Specifications


Appendix D:Specifications

Model WUSB54GSC ver. 2

Standards IEEE 802.11g, IEEE 802.11b, USB 1.1and 2.0

Channels 802.11b / 802.11g

11 Channels (US, Canada)

LEDs Link

Protocols 802.11b: CCK (11 Mbps), DQPSK (2Mbps), DBPSK (1 Mbps); 802.11g:OFDM

Transmitted Power 802.11g: 13 / 1.5 dBm (Typical)802.11b: 16 / 1.5 dBm (Typical)

Receive Sensitivity 11Mbps @ -80dBm (Typical)

54Mbps @ -65dBm (Typical)Security eatures WEP, WPA and WPA2 Encryption

WEP key bits 64 Bit and 128 Bit

Environmental

Dimensions 3.86" x 0.43" x 1.10"(98 x 11 x 28 mm)

Weight 0.5 oz (23 g)

Certifcation FCC, Wi-Fi (802.11b/g)

Operating Temp. 32 to 104F (0 to 40C)

Storage Temp. 14 to 158F (10 to70C)

Operating Humidity 10 to 85% Noncondensing

Storage Humidity 5 to 90% Noncondensing

Specifcations are subject to change without notice.


24/38

Appendix E Warranty Information


Appendix E:Warranty Information

Limited Warranty

Linksys warrants this Linksys hardware product againstdeects in materials and workmanship under normaluse or the Warranty Period, which begins on the date opurchase by the original end-user purchaser and lasts orthe period speciied below:

One (1) year or new product

Ninety (90) days or reurbished product

This limited warranty is non-transerable and extends onlyto the original end-user purchaser. Your exclusive remedyand Linksys entire liability under this limited warrantywill be or Linksys, at its option, to (a) repair the product

with new or reurbished parts, (b) replace the productwith a reasonably available equivalent new or reurbishedLinksys product, or (c) reund the purchase price o theproduct less any rebates. Any repaired or replacementproducts will be warranted or the remainder o theoriginal Warranty Period or thirty (30) days, whichever islonger. All products and parts that are replaced becomethe property o Linksys.

Exclusions and Limitations

This limited warranty does not apply i: (a) the productassembly seal has been removed or damaged, (b) the

product has been altered or modiied, except by Linksys, (c)the product damage was caused by use with non-Linksysproducts, (d) the product has not been installed, operated,repaired, or maintained in accordance with instructionssupplied by Linksys, (e) the product has been subjected toabnormal physical or electrical stress, misuse, negligence,or accident, () the serial number on the Product has beenaltered, deaced, or removed, or (g) the product is suppliedor licensed or beta, evaluation, testing or demonstrationpurposes or which Linksys does not charge a purchaseprice or license ee.

ALL SOFTWARE PROVIDED BY LINKSYS WITH THE

PRODUCT, WHETHER FACTORY LOADED ON THEPRODUCT OR CONTAINED ON MEDIA ACCOMPANYINGTHE PRODUCT, IS PROVIDED AS IS WITHOUT WARRANTYOF ANY KIND. Without limiting the oregoing, Linksys doesnot warrant that the operation o the product or sotwarewill be uninterrupted or error ree. Also, due to thecontinual development o new techniques or intrudingupon and attacking networks, Linksys does not warrantthat the product, sotware or any equipment, system ornetwork on which the product or sotware is used will beree o vulnerability to intrusion or attack. The productmay include or be bundled with third party sotware or

service oerings. This limited warranty shall not apply tosuch third party sotware or service oerings. This limitedwarranty does not guarantee any continued availabilityo a third partys service or which this products use oroperation may require.

TO THE EXTENT NOT PROHIBITED BY LAW, ALL IMPLIED

WARRANTIES AND CONDITIONS OF MERCHANTABILITY,SATISFACTORY QUALITY OR FITNESS FOR A PARTICULARPURPOSE ARE LIMITED TO THE DURATION OF THEWARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIEDCONDITIONS, REPRESENTATIONS AND WARRANTIES,INCLUDING, BUT NOT LIMITED TO, ANY IMPLIEDWARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED.Some jurisdictions do not allow limitations on how longan implied warranty lasts, so the above limitation may notapply to you. This limited warranty gives you speciic legalrights, and you may also have other rights which vary by

jurisdiction.

TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENTWILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUEOR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THETHEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISINGOUT OF OR RELATED TO THE USE OF OR INABILITY TOUSE THE PRODUCT (INCLUDING ANY SOFTWARE), EVENIF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OFSUCH DAMAGES. IN NO EVENT WILL LINKSYS LIABILITYEXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.The oregoing limitations will apply even i any warrantyor remedy provided under this limited warranty ails oits essential purpose. Some jurisdictions do not allow

the exclusion or limitation o incidental or consequentialdamages, so the above limitation or exclusion may notapply to you.

Obtaining Warranty Service

I you have a question about your product or experience aproblem with it, please go to www.linksys.com/supportwhere you will ind a variety o online support tools andinormation to assist you with your product. I the productproves deective during the Warranty Period, contactLinksys Technical Support or instructions on how toobtain warranty service. The telephone number or Linksys

Technical Support in your area can be ound in the productUser Guide and at www.linksys.com. Have your productserial number and proo o purchase on hand when calling.A DATED PROOF OF ORIGINAL PURCHASE IS REQUIREDTO PROCESS WARRANTY CLAIMS. I you are requested toreturn your product, you will be given a Return MaterialsAuthorization (RMA) number. You are responsible orproperly packaging and shipping your product to Linksysat your cost and risk. You must include the RMA numberand a copy o your dated proo o original purchase whenreturning your product. Products received without a RMAnumber and dated proo o original purchase will be
http://www.linksys.com/supporthttp://www.linksys.com/http://www.linksys.com/http://www.linksys.com/support


25/38

Appendix E Warranty Information


rejected. Do not include any other items with the productyou are returning to Linksys. Deective product coveredby this limited warranty will be repaired or replaced andreturned to you without charge. Customers outside othe United States o America and Canada are responsibleor all shipping and handling charges, custom duties,

VAT and other associated taxes and charges. Repairs orreplacements not covered under this limited warranty willbe subject to charge at Linksys then-current rates.

Technical Support

This limited warranty is neither a service nor a supportcontract. Inormation about Linksys current technicalsupport oerings and policies (including any ees orsupport services) can be ound at:www.linksys.com/support.

This limited warranty is governed by the laws o thejurisdiction in which the Product was purchased by you.

Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine,CA 92623.
http://www.linksys.com/supporthttp://www.linksys.com/support


26/38

Appendix F Regulatory Information


Appendix F:Regulatory Information

FCC Statement

This device complies with Part 15 o the FCC Rules.Operation is subject to the ollowing two conditions: (1)This device may not cause harmul intererence, and (2) thisdevice must accept any intererence received, includingintererence that may cause undesired operation.

This product has been tested and complies with thespeciications or a Class B digital device, pursuant to Part15 o the FCC Rules. These limits are designed to providereasonable protection against harmul intererence ina residential installation. This equipment generates,uses, and can radiate radio requency energy and, i notinstalled and used according to the instructions, maycause harmul intererence to radio communications.However, there is no guarantee that intererence will notoccur in a particular installation. I this equipment doescause harmul intererence to radio or television reception,which is ound by turning the equipment o and on, theuser is encouraged to try to correct the intererence byone or more o the ollowing measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment ordevices

Connect the equipment to an outlet other than the

receivers

Consult a dealer or an experienced radio/TV technicianor assistance

FCC Caution: Any changes or modiications not expresslyapproved by the party responsible or compliance couldvoid the users authority to operate this equipment.

SAR compliance has been established in typical laptopcomputer(s) with USB slot, and product could be used intypical laptop computer with USB slot. Other applicationlike handheld PC or similar device has not been veriiedand may not compliance with related RF exposure rule

and such use shall be prohibited.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposurelimits set orth or an uncontrolled environment. Thisequipment should be installed and operated withminimum distance 20cm between the radiator and yourbody.

This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter. IEEE802.11b or 802.11g operation o this product in the USA isirmware-limited to channels 1 through 11.

Saety Notices

Caution: To reduce the risk o ire, use only No.26 AWGor larger telecommunication line cord.

Do not use this product near water, or example, in awet basement or near a swimming pool.

Avoid using this product during an electrical storm.There may be a remote risk o electric shock romlightning.

WARNING: This product contains lead, knownto the State o Caliornia to cause cancer, andbirth deects or other reproductive harm. Wash

hands ater handling.

Industry Canada Statement

This Class B digital apparatus complies with CanadianICES-003 and RSS210.

Operation is subject to the ollowing two conditions:

This device may not cause intererence and1.

This device must accept any intererence, including2.intererence that may cause undesired operation othe device.

Industry Canada Radiation Exposure Statement:

This equipment complies with IC radiation exposure limitsset orth or an uncontrolled environment. End users mustollow the speciic operating instructions or satisyingRF exposure compliance. To maintain compliance withIC RF exposure compliance requirements, please ollowoperation instruction as documented in this manual.

This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.


27/38



Avis dIndustrie Canada

Cet appareil numrique de la classe B est conorme auxnormes NMB-003 et RSS210 du Canada.

Lutilisation de ce dispositi est autorise seulement auxconditions suivantes :

il ne doit pas produire de brouillage et1.

il doit accepter tout brouillage radiolectrique reu,2.mme si ce brouillage est susceptible de compromettrele onctionnement du dispositi.

Avis dIndustrie Canada concernant lexposition

aux radiorquences :

Ce matriel est conorme aux limites tablies par ICen matire dexposition aux radiorquences dans unenvironnement non contrl. Loprateur doit suivre lesinstructions dutilisation dcrites dans le prsent manuel

ain de maintenir la conormit de linstallation.Lmetteur ne doit pas tre plac prs dune autre antenneou dun autre metteur, ou onctionner avec une autreantenne ou un autre metteur.

Wireless Disclaimer

The maximum perormance or wireless is derived romIEEE Standard 802.11 speciications. Actual perormancecan vary, including lower wireless network capacity,data throughput rate, range and coverage. Perormancedepends on many actors, conditions and variables,including distance rom the access point, volume onetwork traic, building materials and construction,operating system used, mix o wireless products used,intererence and other adverse conditions.

Avis de non-responsabilit concernant les

appareils sans il

Les perormances maximales pour les rseaux sans ilsont tires des spciications de la norme IEEE 802.11.Les perormances relles peuvent varier, notamment

en onction de la capacit du rseau sans il, du dbitde la transmission de donnes, de la porte et de lacouverture. Les perormances dpendent de acteurs,conditions et variables multiples, en particulier de ladistance par rapport au point daccs, du volume du traicrseau, des matriaux utiliss dans le btiment et dutype de construction, du systme dexploitation et de lacombinaison de produits sans il utiliss, des interrenceset de toute autre condition davorable.


28/38



User Inormation or Consumer Products

Covered by EU Directive 2002/96/EC on

Waste Electric and Electronic Equipment

(WEEE)

This document contains important inormation or userswith regards to the proper disposal and recycling oLinksys products. Consumers are required to comply withthis notice or all electronic products bearing the ollowingsymbol:

English - Environmental Information for Customers inthe European Union

European Directive 2002/96/EC requires that the equipmentbearing this symbol on the product and/or its packaging mustnot be disposed o with unsorted municipal waste. The symbolindicates that this product should be disposed o separatelyrom regular household waste streams. It is your responsibility todispose o this and other electric and electronic equipment viadesignated collection acilities appointed by the government orlocal authorities. Correct disposal and recycling will help preventpotential negative consequences to the environment andhuman health. For more detailed inormation about the disposal

o your old equipment, please contact your local authorities,waste disposal service, or the shop where you purchased theproduct.

(Bulgarian) -

2002/96/EC , / , . , .

. . - , , .

Cetina (Czech) - Informace o ochran ivotnhoprosted pro zkaznky v zemch Evropsk unie

Evropsk smrnice 2002/96/ES zakazuje, aby zazen oznaentmto symbolem na produktu anebo na obalu bylo likvidovnos netdnm komunlnm odpadem. Tento symbol udv,e dan produkt mus bt likvidovn oddlen od bnhokomunlnho odpadu. Odpovdte za likvidaci tohoto produktu

a dalch elektrickch a elektronickch zazen prostednictvmurench sbrnch mst stanovench vldou nebo mstnmiady. Sprvn likvidace a recyklace pomh pedchzetpotencilnm negativnm dopadm na ivotn prosted a lidskzdrav. Podrobnj inormace o likvidaci starho vybaven silaskav vydejte od mstnch ad, podniku zabvajcho selikvidac komunlnch odpad nebo obchodu, kde jste produktzakoupili.

Dansk (Danish) - Miljinformation for kunder i EU

EU-direktiv 2002/96/EF krver, at udstyr der brer dette symbolp produktet og/eller emballagen ikke m bortskaes som

usorteret kommunalt aald. Symbolet betyder, at dette produkt

skal bortskaes adskilt ra det almindelige husholdningsaald.Det er dit ansvar at bortskae dette og andet elektrisk ogelektronisk udstyr via bestemte indsamlingssteder udpegeta staten eller de lokale myndigheder. Korrekt bortskaelseog genvinding vil hjlpe med til at undg mulige skader ormiljet og menneskers sundhed. Kontakt venligst de lokalemyndigheder, renovationstjenesten eller den butik, hvor duhar kbt produktet, angende mere detaljeret inormation ombortskaelse a dit gamle udstyr.

Deutsch (German) - Umweltinformation fr Kundeninnerhalb der Europischen Union

Die Europische Richtlinie 2002/96/EC verlangt, dass technische

Ausrstung, die direkt am Gert und/oder an der Verpackung mitdiesem Symbol versehen ist , nicht zusammen mit unsortiertemGemeindeaball entsorgt werden dar. Das Symbol weist darauhin, dass das Produkt von regulrem Haushaltmll getrenntentsorgt werden sollte. Es liegt in Ihrer Verantwortung, diesesGert und andere elektrische und elektronische Gerte berdie dar zustndigen und von der Regierung oder rtlichenBehrden dazu bestimmten Sammelstellen zu entsorgen.Ordnungsgemes Entsorgen und Recyceln trgt dazu bei,potentielle negative Folgen r Umwelt und die menschlicheGesundheit zu vermeiden. Wenn Sie weitere Inormationen zurEntsorgung Ihrer Altgerte bentigen, wenden Sie sich bitte andie rtlichen Behrden oder stdtischen Entsorgungsdiensteoder an den Hndler, bei dem Sie das Produkt erworben haben.


29/38



Eesti (Estonian) - Keskkonnaalane informatsioonEuroopa Liidus asuvatele klientidele

Euroopa Liidu direktiivi 2002/96/E nuete kohaselt onseadmeid, millel on tootel vi pakendil kesolev smbol ,keelatud krvaldada koos sorteerimata olmejtmetega. Seesmbol nitab, et toode tuleks krvaldada eraldi tavalistestolmejtmevoogudest. Olete kohustatud krvaldama kesoleva

ja ka muud elektri- ja elektroonikaseadmed riigi vi kohalikeametiasutuste poolt ette nhtud kogumispunktide kaudu.Seadmete korrektne krvaldamine ja ringlussevtt aitab vltidavimalikke negatiivseid tagajrgi keskkonnale ning inimestetervisele. Vanade seadmete krvaldamise kohta tpsemainormatsiooni saamiseks vtke palun hendust kohalikeametiasutustega, jtmekitlusirmaga vi kauplusega, kust tetoote ostsite.

Espaol (Spanish) - Informacin medioambiental paraclientes de la Unin Europea

La Directiva 2002/96/CE de la UE exige que los equipos quelleven este smbolo en el propio aparato y/o en su embalaje

no deben eliminarse junto con otros residuos urbanos noseleccionados. El smbolo indica que el producto en cuestindebe separarse de los residuos domsticos convencionales convistas a su eliminacin. Es responsabilidad suya desechar este ycualesquiera otros aparatos elctricos y electrnicos a travs delos puntos de recogida que ponen a su disposicin el gobierno ylas autoridades locales. Al desechar y reciclar correctamente estosaparatos estar contribuyendo a evitar posibles consecuenciasnegativas para el medio ambiente y la salud de las personas. Sidesea obtener inormacin ms detallada sobre la eliminacinsegura de su aparato usado, consulte a las autoridades locales,al servicio de recogida y eliminacin de residuos de su zona opregunte en la tienda donde adquiri el producto.

(Greek) -

2002/96/EC / . . .

. , , .

Franais (French) - Informations environnementalespour les clients de lUnion europenne

La directive europenne 2002/96/CE exige que lquipementsur lequel est appos ce symbole sur le produit et/ou sonemballage ne soit pas jet avec les autres ordures mnagres. Cesymbole indique que le produit doit tre limin dans un circuitdistinct de celui pour les dchets des mnages. Il est de votre

responsabilit de jeter ce matriel ainsi que tout autre matriellectrique ou lectronique par les moyens de collecte indiquspar le gouvernement et les pouvoirs publics des collectivitsterritoriales. Llimination et le recyclage en bonne et due ormeont pour but de lutter contre limpact naste potentiel de cetype de produits sur lenvironnement et la sant publique. Pourplus dinormations sur le mode dlimination de votre ancienquipement, veuillez prendre contact avec les pouvoirs publicslocaux, le service de traitement des dchets, ou lendroit o vousavez achet le produit.

Italiano (Italian) - Informazioni relative allambienteper i clienti residenti nellUnione Europea

La direttiva europea 2002/96/EC richiede che le apparecchiaturecontrassegnate con questo simbolo sul prodotto e/osullimballaggio non siano smaltite insieme ai riiuti urbaninon dierenziati. Il simbolo indica che questo prodotto nondeve essere smaltito insieme ai normali riiuti domestici. responsabilit del proprietario smaltire sia questi prodotti siale altre apparecchiature elettriche ed elettroniche mediantele speciiche strutture di raccolta indicate dal governo o daglienti pubblici locali. Il corretto smaltimento ed il riciclaggioaiuteranno a prevenire conseguenze potenzialmente negativeper lambiente e per la salute dellessere umano. Per ricevereinormazioni pi dettagliate circa lo smaltimento delle vecchieapparecchiature in Vostro possesso, Vi invitiamo a contattare glienti pubblici di competenza, il servizio di smaltimento riiuti o il

negozio nel quale avete acquistato il prodotto.

Latvieu valoda (Latvian) - Ekoloiska informcijaklientiem Eiropas Savienbas jurisdikcij

Direktv 2002/96/EK ir prasba, ka aprkojumu, kam pievienotazme uz paa izstrdjuma vai uz t iesaiojuma, nedrkstizmest neirot veid kop ar komunlajiem atkritumiem(tiem, ko rada vietji iedzvotji un uzmumi). zme nozmto, ka ierce ir jizmet atkritumos t, lai t nenonktu kop arparastiem mjsaimniecbas atkritumiem. Jsu pienkums ir oun citas elektriskas un elektroniskas ierces izmest atkritumos,izmantojot paus atkritumu savkanas veidus un ldzekus, konodroina valsts un pavaldbu iestdes. Ja izmeana atkritumos

un prstrde tiek veikta pareizi, tad mazins iespjamaiskaitjums dabai un cilvku veselbai. Skkas zias parnovecojua aprkojuma izmeanu atkritumos js varat saemtvietj pavaldb, atkritumu savkanas dienest, k ar veikal,kur iegdjties o izstrdjumu.


30/38



Lietuvkai (Lithuanian) - Aplinkosaugos informacija,skirta Europos Sjungos vartotojams

Europos direktyva 2002/96/EC numato, kad rangos, kuri irkurios pakuot yra paymta iuo simboliu (veskite simbol),negalima alinti kartu su neriuotomis komunalinmisatliekomis. is simbolis rodo, kad gamin reikia alinti atskirainuo bendro buitini atliek srauto. Js privalote utikrinti, kad

i ir kita elektros ar elektronin ranga bt alinama per tamtikras nacionalins ar vietins valdios nustatytas atliek rinkimosistemas. Tinkamai alinant ir perdirbant atliekas, bus ivengtagalimos alos aplinkai ir moni sveikatai. Daugiau inormacijosapie js senos rangos alinim gali pateikti vietins valdiosinstitucijos, atliek alinimo tarnybos arba parduotuvs, kuriosesigijote t gamin.

Malti (Maltese) - Informazzjoni Ambjentali gal Klijentifl-Unjoni Ewropea

Id-Direttiva Ewropea 2002/96/KE titlob li t-tagmir li jkun ih is-simbolu uq il-prodott u/jew uq l-ippakkjar ma jistax jintremama skart muniipali li ma iex isseparat. Is-simbolu jindika

li dan il-prodott gandu jintrema separatament minn ma l-iskart domestiku regolari. Hija responsabbilt tiegek li tarmidan it-tagmir u kull tagmir ieor ta l-elettriku u elettronikupermezz ta ailitajiet ta bir appuntati apposta mill-gvern jewmill-awtoritajiet lokali. Ir-rimi bmod korrett u r-riikla jginjipprevjeni konsegwenzi negattivi potenzjali gall-ambjent ugas-saa tal-bniedem. Gal aktar inormazzjoni dettaljatadwar ir-rimi tat-tagmir antik tiegek, jekk jogbok ikkuntattjalill-awtoritajiet lokali tiegek, is-servizzi gar-rimi ta l-iskart, jewil-anut minn ejn xtrajt il-prodott.

Magyar (Hungarian) - Krnyezetvdelmi informci azeurpai unis vsrlk szmra

A 2002/96/EC szm eurpai unis irnyelv megkvnja, hogyazokat a termkeket, amelyeken, s/vagy amelyek csomagolsnaz albbi cmke megjelenik, tilos a tbbi szelektlatlan lakossgihulladkkal egytt kidobni. A cmke azt jelli, hogy az adotttermk kidobsakor a szokvnyos hztartsi hulladkelszlltsirendszerektl elklntett eljrst kell alkalmazni. Az nelelssge, hogy ezt, s ms elektromos s elektronikusberendezseit a kormnyzati vagy a helyi hatsgok ltalkijellt gyjtredszereken keresztl szmolja el. A megelelhulladkeldolgozs segt a krnyezetre s az emberi egszsgrepotencilisan rtalmas negatv hatsok megelzsben. Haelavult berendezseinek elszmolshoz tovbbi rszletesinormcira van szksge, krjk, lpjen kapcsolatba a helyihatsgokkal, a hulladkeldolgozsi szolglattal, vagy azzal

zlettel, ahol a termket vsrolta.

Nederlands (Dutch) - Milieu-informatie voor klantenin de Europese Unie

De Europese Richtlijn 2002/96/EC schrijt voor dat apparatuur dieis voorzien van dit symbool op het product o de verpakking,niet mag worden ingezameld met niet-gescheiden huishoudelijkaval. Dit symbool geet aan dat het product apart moet wordeningezameld. U bent zel verantwoordelijk voor de vernietiging

van deze en andere elektrische en elektronische apparatuur via dedaarvoor door de landelijke o plaatselijke overheid aangewezeninzamelingskanalen. De juiste vernietiging en recycling vandeze apparatuur voorkomt mogelijke negatieve gevolgen voorhet milieu en de gezondheid. Voor meer inormatie over hetvernietigen van uw oude apparatuur neemt u contact op metde plaatselijke autoriteiten o avalverwerkingsdienst, o met dewinkel waar u het product hebt aangeschat.

Norsk (Norwegian) - Miljinformasjon for kunder i EU

EU-direktiv 2002/96/EF krever at utstyr med lgende symbolavbildet p produktet og/eller pakningen, ikke m kastes

sammen med usortert avall. Symbolet indikerer at dette

produktet skal hndteres atskilt ra ordinr avallsinnsamlingor husholdningsavall. Det er ditt ansvar kvitte deg meddette produktet og annet elektrisk og elektronisk avall via egneinnsamlingsordninger slik myndighetene eller kommunenebestemmer. Korrekt avallshndtering og gjenvinning vilvre med p orhindre mulige negative konsekvenser ormilj og helse. For nrmere inormasjon om hndtering avdet kasserte utstyret ditt, kan du ta kontakt med kommunen,en innsamlingsstasjon or avall eller butikken der du kjpteproduktet.

Polski (Polish) - Informacja dla klientw w UniiEuropejskiej o przepisach dotyczcych ochrony

rodowiskaDyrektywa Europejska 2002/96/EC wymaga, aby sprztoznaczony symbolem znajdujcym si na produkcie i/lub jegoopakowaniu nie by wyrzucany razem z innymi niesortowanymiodpadami komunalnymi. Symbol ten wskazuje, e produktnie powinien by usuwany razem ze zwykymi odpadami zgospodarstw domowych. Na Pastwu spoczywa obowizekwyrzucania tego i innych urzdze elektrycznych orazelektronicznych w punktach odbioru wyznaczonych przez wadzekrajowe lub lokalne. Pozbywanie si sprztu we waciwy sposbi jego recykling pomog zapobiec potencjalnie negatywnymkonsekwencjom dla rodowiska i zdrowia ludzkiego. W celuuzyskania szczegowych inormacji o usuwaniu starego sprztu,prosimy zwrci si do lokalnych wadz, sub oczyszczania

miasta lub sklepu, w ktrym produkt zosta nabyty.


31/38



Portugus (Portuguese) - Informao ambiental paraclientes da Unio Europeia

A Directiva Europeia 2002/96/CE exige que o equipamentoque exibe este smbolo no produto e/ou na sua embalagemno seja eliminado junto com os resduos municipais noseparados. O smbolo indica que este produto deve sereliminado separadamente dos resduos domsticos regulares.

da sua responsabilidade eliminar este e qualquer outroequipamento elctrico e electrnico atravs das instalaesde recolha designadas pelas autoridades governamentais oulocais. A eliminao e reciclagem correctas ajudaro a preveniras consequncias negativas para o ambiente e para a sadehumana. Para obter inormaes mais detalhadas sobre aorma de eliminar o seu equipamento antigo, contacte asautoridades locais, os servios de eliminao de resduos ou oestabelecimento comercial onde adquiriu o produto.

Romn (Romanian) - Informaii de mediu pentruclienii din Uniunea European

Directiva european 2002/96/CE impune ca echipamentele care

prezint acest simbol pe produs i/sau pe ambalajul acestuia snu ie casate mpreun cu gunoiul menajer municipal. Simbolulindic aptul c acest produs trebuie s ie casat separat degunoiul menajer obinuit. Este responsabilitatea dvs. s casaiacest produs i alte echipamente electrice i electronice prinintermediul unitilor de colectare special desemnate de guvernsau de autoritile locale. Casarea i reciclarea corecte vor ajutala prevenirea potenialelor consecine negative asupra sntiimediului i a oamenilor. Pentru mai multe inormaii detaliatecu privire la casarea acestui echipament vechi, contactaiautoritile locale, serviciul de salubrizare sau magazinul de lacare ai achiziionat produsul.

Slovenina (Slovak) - Informcie o ochrane ivotnhoprostredia pre zkaznkov v Eurpskej nii

Poda eurpskej smernice 2002/96/ES zariadenie s tmtosymbolom na produkte a/alebo jeho balen nesmie bylikvidovan spolu s netriedenm komunlnym odpadom.Symbol znamen, e produkt by sa mal likvidova oddeleneod benho odpadu z domcnost. Je vaou povinnosoulikvidova toto i ostatn elektrick a elektronick zariadeniaprostrednctvom pecializovanch zbernch zariaden urenchvldou alebo miestnymi orgnmi. Sprvna likvidcia a recyklciapome zabrni prpadnm negatvnym dopadom na ivotnprostredie a zdravie ud. Ak mte zujem o podrobnejieinormcie o likvidcii starho zariadenia, obrte sa, prosm, namiestne orgny, organizcie zaoberajce sa likvidciou odpadov

alebo obchod, v ktorom ste si produkt zakpili.

Slovenina (Slovene) - Okoljske informacije za strankev Evropski uniji

Evropska direktiva 2002/96/EC prepoveduje odlaganje opreme,oznaene s tem simbolom na izdelku in/ali na embalai medobiajne, nerazvrene odpadke. Ta simbol opozarja, da je trebaizdelek odvrei loeno od preostalih gospodinjskih odpadkov.Vaa odgovornost je, da to in preostalo elektrino in elektronsko

opremo odnesete na posebna zbiralia, ki jih doloijodravne ustanove ali lokalna uprava. S pravilnim odlaganjemin recikliranjem boste prepreili morebitne kodljive vplive naokolje in zdravje ljudi. e elite izvedeti ve o odlaganju stareopreme, se obrnite na lokalno upravo, odpad ali trgovino, kjerste izdelek kupili.

Suomi (Finnish) - Ymprist koskevia tietoja EU-alueen asiakkaille

EU-direktiivi 2002/96/EY edellytt, ett jos laitteistossa on tmsymboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoaei saa hvitt lajittelemattoman yhdyskuntajtteen mukana.Symboli merkitsee sit, ett tm tuote on hvitettv erilln

tavallisesta kotitalousjtteest. Sinun vastuullasi on hvitttm elektroniikkatuote ja muut vastaavat elektroniikkatuotteetviemll tuote tai tuotteet viranomaisten mrmnkeryspisteeseen. Laitteiston oikea hvittminen estmahdolliset kielteiset vaikutukset ympristn ja ihmistenterveyteen. Listietoja vanhan laitteiston oikeasta hvitystavastasaa paikallisilta viranomaisilta, jtteenhvityspalvelusta tai siitmyymlst, josta ostit tuotteen.

Svenska (Swedish) - Miljinformation fr kunder iEuropeiska unionen

Det europeiska direktivet 2002/96/EC krver att utrustning meddenna symbol p produkten och/eller rpackningen inte r

kastas med osorterat kommunalt avall. Symbolen visar att dennaprodukt br kastas eter att den avskiljts rn vanligt hushllsavall.Det aller p ditt ansvar att kasta denna och annan elektrisk ochelektronisk utrustning p aststllda insamlingsplatser utseddaav regeringen eller lokala myndigheter. Korrekt kassering ochtervinning skyddar mot eventuella negativa konsekvenserr miljn och personhlsa. Fr mer detaljerad inormation omkassering av din gamla utrustning kontaktar du dina lokalamyndigheter, avallshanteringen eller butiken dr du kpteprodukten.

WEB: For additional inormation, please visitwww.linksys.com


32/38

29

Appendix G Software License Agreement

Compact USB Network Adapter with SpeedBooster

Appendix G: SoftwareLicense Agreement

Sotware in Linksys Products

This product rom Cisco-Linksys LLC or rom one o itsailiates Cisco Systems-Linksys (Asia) Pte Ltd. or Cisco-Linksys K.K. (Linksys) contains sotware (includingirmware) originating rom Linksys and its suppliersand may also contain sotware rom the open sourcecommunity. Any sotware originating rom Linksys and itssuppliers is licensed under the Linksys Sotware LicenseAgreement contained at Schedule 1 below. You may alsobe prompted to review and accept that Linksys SotwareLicense Agreement upon installation o the sotware.

Any sotware rom the open source community is licensedunder the speciic license terms applicable to that sotwaremade available by Linksys at www.linksys.com/gpl or asprovided or in Schedules 2 and 3 below.

Where such speciic license terms entitle you to the sourcecode o such sotware, that source code is upon requestavailable at cost rom Linksys or at least three yearsrom the purchase date o this product and may also beavailable or download rom www.linksys.com/gpl. Fordetailed license terms and additional inormation onopen source sotware in Linksys products please look atthe Linksys public web site at: www.linksys.com/gpl/ orSchedule 2 below as applicable.

BY DOWNLOADING OR INSTALLING THE SOFTWARE,OR USING THE PRODUCT CONTAINING THE SOFTWARE,YOU ARE CONSENTING TO BE BOUND BY THE SOFTWARELICENSE AGREEMENTS BELOW. IF YOU DO NOT AGREE TOALL OF THESE TERMS, THEN YOU MAY NOT DOWNLOAD,INSTALL OR USE THE SOFTWARE. YOU MAY RETURNUNUSED SOFTWARE (OR, IF THE SOFTWARE IS SUPPLIEDAS PART OF ANOTHER PRODUCT, THE UNUSED PRODUCT )FOR A FULL REFUND UP TO 30 DAYS AFTER ORIGINALPURCHASE, SUBJECT TO THE RETURN PROCESS ANDPOLICIES OF THE PARTY FROM WHICH YOU PURCHASEDSUCH PRODUCT OR SOFTWARE.

Sotware LicensesThe sotware Licenses applicable to sotware rom Linksysare made available at the Linksys public web site at:www.linksys.com and www.linksys.com/gpl/respectively. For your convenience o reerence, a copyo the Linksys Sotware License Agreement and the mainopen source code licenses used by Linksys in its productsare contained in the Schedules below.

Schedule 1 - Linksys Sotware License Agreement

THIS LICENSE AGREEMENT IS BETWEEN YOU ANDCISCO-LINKSYS LLC OR ONE OF ITS AFFILIATES CISCOSYSTEMS-LINKSYS (ASIA) PTE LTD. OR CISCO-LINKSYSK.K. (LINKSYS) LICENSING THE SOFTWARE INSTEAD OFCISCO-LINKSYS LLC. BY DOWNLOADING OR INSTALLINGTHE SOFTWARE, OR USING THE PRODUCT CONTAININGTHE SOFTWARE, YOU ARE CONSENTING TO BE BOUND BYTHIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THESETERMS, THEN YOU MAY NOT DOWNLOAD, INSTALL OR USETHE SOFTWARE. YOU MAY RETURN UNUSED SOFTWARE(OR, IF THE SOFTWARE IS SUPPLIED AS PART OF ANOTHERPRODUCT, THE UNUSED PRODUCT) FOR A FULL REFUNDUP TO 30 DAYS AFTER ORIGINAL PURCHASE, SUBJECT TOTHE RETURN PROCESS AND POLICIES OF THE PARTY FROMWHICH YOU PURCHASED SUCH PRODUCT OR SOFTWARE.

License. Subject to the terms and conditions o thisAgreement, Linksys grants the original end user purchaser

o the Linksys product containing the Sotware (You)a nonexclusive license to use the Sotware solely asembedded in or (where authorized in the applicabledocumentation) or communication with such product.This license may not be sublicensed, and is not transerableexcept to a person or entity to which you transerownership o the complete Linksys product containingthe Sotware, provided you permanently transer all rightsunder this Agreement and do not retain any ull or partialcopies o the Sotware, and the recipient agrees to theterms o this Agreement.

Sotware includes, and this Agreement will apply to (a)

the sotware o Linksys or its suppliers provided in or withthe applicable Linksys product, and (b) any upgrades,updates, bug ixes or modiied versions (Upgrades) orbackup copies o the Sotware supplied to You by Linksysor an authorized reseller, provided you already hold avalid license to the original sotware and have paid anyapplicable ee or the Upgrade.

Protection o Inormation. The Sotware anddocumentation contain trade secrets and/or copyrightedmaterials o Linksys or its suppliers. You will not copyor modiy the Sotware or decompile, decrypt, reverseengineer or disassemble the Sotware (except to the

extent expressly permitted by law notwithstanding thisprovision), and You will not disclose or make availablesuch trade secrets or copyrighted material in any ormto any third party. Title to and ownership o the Sotwareand documentation and any portion thereo, will remainsolely with Linksys or its suppliers.

Collection and Processing o Inormation. You agree thatLinksys and/or its ailiates may, rom time to time, collectand process inormation about your Linksys productand/or the Sotware and/or your use o either in order(i) to enable Linksys to oer you Upgrades; (ii) to ensurethat your Linksys product and/or the Sotware is being
http://www.linksys.com/gplhttp://www.linksys.com/gplhttp://www.linksys.com/gpl/http://www.linksys.com/http://www.linksys.com/gpl/http://www.linksys.com/gpl/http://www.linksys.com/http://www.linksys.com/gpl/http://www.linksys.com/gplhttp://www.linksys.com/gpl


33/38

30



used in accordance with the terms o this Agreement;(iii) to provide improvements to the way Linksys deliverstechnology to you and to other Linksys customers; (iv) toenable Linksys to comply with the terms o any agreementsit has with any third parties regarding your Linksysproduct and/or Sotware and/or (v) to enable Linksys to

comply with all applicable laws and/or regulations, or therequirements o any regulatory authority or governmentagency. Linksys and/ or its ailiates may collect andprocess this inormation provided that it does not identiyyou personally. Your use o your Linksys product and/orthe Sotware constitutes this consent by you to Linksysand/or its ailiates collection and use o such inormationand, or EEA customers, to the transer o such inormationto a location outside the EEA.

Sotware Upgrades etc. I the Sotware enables you toreceive Upgrades, you may elect at any time to receivethese Upgrades either automatically or manually. I youelect to receive Upgrades manually or you otherwiseelect not to receive or be notiied o any Upgrades, youmay expose your Linksys product and/or the Sotwareto serious security threats and/or some eatures withinyour Linksys product and/or Sotware may becomeinaccessible. There may be circumstances where weapply an Upgrade automatically in order to comply withchanges in legislation, legal or regulatory requirementsor as a result o requirements to comply with the termso any agreements Linksys has with any third partiesregarding your Linksys product and/or the Sotware. Youwill always be notiied o any Upgrades being deliveredto you. The terms o this license will apply to any such

Upgrade unless the Upgrade in question is accompaniedby a separate license, in which event the terms o thatlicense will apply.

Open Source Sotware. The GPL or other open sourcecode incorporated into the Sotware and the open sourcelicense or such source code are available or ree downloadat http://www.linksys.com/gpl. I You would like a copyo the GPL or other open source code in this Sotware on aCD, Linksys will mail to You a CD with such code or $9.99plus the cost o shipping, upon request.

Term and Termination. You may terminate this Licenseat any time by destroying all copies o the Sotware

and documentation. Your rights under this License willterminate immediately without notice rom Linksys i Youail to comply with any provision o this Agreement.

Limited Warranty. The warranty terms and periodspeciied in the applicable Linksys Product User Guideshall also apply to the Sotware.

Disclaimer o Liabilities. IN NO EVENT WILL LINKSYS ORITS SUPPLIERS BE LIABLE FOR ANY LOST DATA, REVENUEOR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OFCAUSE (INCLUDING NEGLIGENCE), ARISING OUT OFOR RELATED TO THE USE OF OR INABILITY TO USE THE

SOFTWARE, EVEN IF LINKSYS HAS BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILLLINKSYS LIABILITY EXCEED THE AMOUNT PAID BY YOUFOR THE PRODUCT. The oregoing limitations will applyeven i any warranty or remedy under this Agreement ailso its essential purpose. Some jurisdictions do not allow

the exclusion or limitation o incidental or consequentialdamages, so the above limitation or exclusion may notapply to You.

Export. Sotware, including technical data, may be subjectto U.S. export control laws and regulations and/or exportor import regulations in other countries. You agree tocomply strictly with all such laws and regulations.

U.S. Government Users. The Sotware and documentationqualiy as commercial items as deined at 48 C.F.R. 2.101and 48 C.F.R. 12.212. All Government users acquire theSotware and documentation with only those rightsherein that apply to non-governmental customers.

General Terms. This Agreement will be governed by andconstrued in accordance with the laws o the State oCaliornia, without reerence to conlict o laws principles.The United Nations Convention on Contracts or theInternational Sale o Goods will not apply. I any portiono this Agreement is ound to be void or unenorceable,the remaining provisions will remain in ull orce andeect. This Agreement constitutes the entire agreementbetween the parties with respect to the Sotware andsupersedes any conlicting or additional terms containedin any purchase order or elsewhere.

END OF SCHEDULE 1

Schedule 2

I this Linksys product contains open source sotwarelicensed under Version 2 o the GNU General PublicLicense then the license terms below in this Schedule 2will apply to that open source sotware. The license termsbelow in this Schedule 2 are rom the public web site athttp://www.gnu.org/copyleft/gpl.html

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright 1989, 1991 Free Sotware Foundation, Inc.51 Franklin Street, Fith Floor, Boston, MA 02110-1301,USA

Everyone is permitted to copy and distribute verbatimcopies o this license document, but changing it is notallowed.

Preamble

The licenses or most sotware are designed to take awayyour reedom to share and change it. By contrast, theGNU General Public License is intended to guarantee your
http://www.linksys.com/gplhttp://www.gnu.org/copyleft/gpl.htmlhttp://www.gnu.org/copyleft/gpl.htmlhttp://www.linksys.com/gpl


34/38

31



reedom to share and change ree sotwareto make surethe sotware is ree or all its users. This General PublicLicense applies to most o the Free Sotware Foundationssotware and to any other program whose authorscommit to using it. (Some other Free Sotware Foundationsotware is covered by the GNU Lesser General Public

License instead.) You can apply it to your programs, too.When we speak o ree sotware, we are reerring toreedom, not price. Our General Public Licenses aredesigned to make sure that you have the reedom todistribute copies o ree sotware (and charge or thisservice i you wish), that you receive source code or canget it i you want it, that you can change the sotware oruse pieces o it in new ree programs; and that you knowyou can do these things.

To protect your rights, we need to make restrictions thatorbid anyone to deny you these rights or to ask you tosurrender the rights. These restrictions translate to certain

responsibilities or you i you distribute copies o thesotware, or i you modiy it.

For example, i you distribute copies o such a program,whether gratis or or a ee, you must give the recipientsall the rights that you have. You must make sure that they,too, receive or can get the source code. And you mustshow them these terms so they know their rights.

We protect your rights with two steps: (1) copyright thesotware, and (2) oer you this license which gives youlegal permission to copy, distribute and/or modiy thesotware.

Also, or each authors protection and ours, we want tomake certain that everyone understands that there is nowarranty or this ree sotware. I the sotware is modiiedby someone else and passed on, we want its recipientsto know that what they have is not the original, so thatany problems introduced by others will not relect on theoriginal authors reputations.

Finally, any ree program is threatened constantly bysotware patents. We wish to avoid the danger thatredistributors o a ree program will individually obtainpatent licenses, in eect making the program proprietary.To prevent this, we have made it clear that any patent mustbe licensed or everyones ree use or not licensed at all.

The precise terms and conditions or copying, distributionand modiication ollow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND

MODIFICATION

This License applies to any program or other work0.which contains a notice placed by the copyrightholder saying it may be distributed under the termso this General Public License. The Program, below,reers to any such program or work, and a workbased on the Program means either the Programor any derivative work under copyright law: that isto say, a work containing the Program or a portiono it, either verbatim or with modiications and/or translated into another language. (Hereinater,translation is included without limitation in the termmodiication.) Each licensee is addressed as you.

Activities other than copying, distribution andmodiication are not covered by this License; theyare outside its scope. The act o running the Program

is not restricted, and the output rom the Program iscovered only i its contents constitute a work based onthe Program (independent o having been made byrunning the Program). Whether that is true dependson what the Program does.

You may copy and distribute verbatim copies o the1.Programs source code as you receive it, in any medium,provided that you conspicuously and appropriatelypublish on each copy an appropriate copyrightnotice and disclaimer o warranty; keep intact all thenotices that reer to this License and to the absenceo any warranty; and give any other recipients o theProgram a copy o this License along with the Program.

You may charge a ee or the physical act o transerringa copy, and you may at your option oer warrantyprotection in exchange or a ee.

You may modiy your copy or copies o the Program2.or any portion o it, thus orming a work based on theProgram, and copy and distribute such modiicationsor work under the terms o Section 1 above, providedthat you also meet all o these conditions:

You must cause the modiied iles to carrya.prominent notices stating that you changed theiles and the date o any change.

You must cause any work that you distribute orb.publish, that in whole or in part contains or isderived rom the Program or any part thereo, to belicensed as a whole at no charge to all third partiesunder the terms o this License.


35/38

32



I the modiied program normally reads commandsc.interactively when run, you must cause it, whenstarted running or such interactive use in the mostordinary way, to print or display an announcementincluding an appropriate copyright notice anda notice that there is no warranty (or else, saying

that you provide a warranty) and that users mayredistribute the program under these conditions,and telling the user how to view a copy othis License. (Exception: i the Program itsel isinteractive but does not normally print such anannouncement, your work based on the Programis not required to print an announcement.)

These requirements apply to the modiied work asa whole. I identiiable sections o that work are notderived rom the Program, and can be reasonablyconsidered independent and separate works inthemselves, then this License, and its terms, do notapply to those sections when you distribute them asseparate works. But when you distribute the samesections as part o a whole which is a work based onthe Program, the distribution o the whole must be onthe terms o this License, whose permissions or otherlicensees extend to the entire whole, and thus to eachand every part regardless o who wrote it.

Thus, it is not the intent o this section to claim rightsor contest your rights to work written entirely by you;rather, the intent is to exercise the right to control thedistribution o derivative or collective works based onthe Program.

In addition, mere aggregation o another work notbased on the Program with the Program (or with awork based on the Program) on a volume o a storageor distribution medium does not bring the other workunder the scope o this License.

You may copy and distribute the Program (or a1.work based on it, under Section 2) in object code orexecutable orm under the terms o Sections 1 and 2above provided that you also do one o the ollowing:

Accompany it with

LINKSYS Wusb54gsc Wireless-G LINKSYS by Cisco

Documents

Transcript of LINKSYS Wusb54gsc Wireless-G LINKSYS by Cisco