Linksys E3200 User Guide

7/22/2019 Linksys E3200 User Guide

1/671

E-Series


2/671

i

Table of ContentsLinksys E-Series

i

Product overviewE1200/E1500/E2500/E3200 . . . . . . . . . . . . . . . . . . . . . . . .1

Back view 1

Bottom view 1

E4200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Top view 2

Back view 2

Setting Up Your E-Series RouterWhere to find more help . . . . . . . . . . . . . . . . . . . . . . . . . .3

How to set up your router . . . . . . . . . . . . . . . . . . . . . . . . .3How to start Cisco Connect 3

Use Cisco Connect to manage your router 3

How to manually set up your router. . . . . . . . . . . . . . . . . . .3

Advanced Configuration

How to open the browser-based utility . . . . . . . . . . . . . . . .4Setup > Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Language 5

Internet Setup 5

Wireless > Basic Wireless Settings . . . . . . . . . . . . . . . . . . . .6Wireless Settings 6

Wireless SecurityWireless > Wireless Security . . . . . . . . . . . . . . . . . . . . . . . .8

Personal options 8

Office options 8

Option settings 8

TroubleshootingHow to run Cisco Connect after setup . . . . . . . . . . . . . . . . 11

Your router was not successfully set up . . . . . . . . . . . . . . . 12

Get Windows XP Service Pack 3 message . . . . . . . . . . . . . . . 12

Your Internet cable is not plugged in message . . . . . . . . . . . .13

Cannot access your routermessage . . . . . . . . . . . . . . . . . . 14

Device not foundmessage . . . . . . . . . . . . . . . . . . . . . . . . 15

Specifications

Linksys E1200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 7Linksys E1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8

Linksys E2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 9

Linksys E3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 0

Linksys E4200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1

Table of Contents
http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-


3/671

1

Product overviewLinksys E-Series

1

Product overview

E1200/E1500/E2500/E3200

Back view

Ethernet ports Wi-Fi Protected Setup button

Internet port

Power port

Power indicatorUSB port (E3200 only)

Your routers appearance may var y

USB port (E3200 only)To easily share disk storage with other users onyour network or on the Internet, connect a USB drive to this port.

Ethernet portsConnect Ethernet cables (also called networkcables) to these Fast Ethernet (10/100, for E1200 and E1500) or Gigabit

(10/100/1000, for E2500 and E3200) ports, color coded blue, and to other

wired Ethernet network devices on your network.

Internet portConnect an Ethernet cable (also called a network orInternet cable) to this port, color coded yellow, and to your modem.

Wi-Fi Protected Setup buttonPress this button to easily configurewireless security on Wi-Fi Protected Setup-enabled network devices. For

more information, see Wireless Security on page 8.

Power indicatorStays on steadily while power is connected andfollowing a successful Wi-Fi Protected Setup connection. Flashes slowly

during bootup, during firmware upgrades, and during a Wi-Fi Protected

Setup connection. Flashes quickly when there is a Wi-Fi Protected Setup

error.

PowerConnect the included AC power adapter to this port.

CAUTIONUse only the adapter that came with your router.

Power buttonPress |(on) to turn on the router.

Bottom view


Reset buttonPress and hold this button for 5-10 seconds (until theport lights flash at the same time) to reset the router to its factory defaults.

You can also restore the defaults using the browser-based utility.


4/671

2

Product overviewLinksys E-Series

E4200

Top view

Indicator light

Indicator lightStays on steadily while power is connected andfollowing a successful Wi-Fi Protected Setup connection. Pulses slowly

during bootup, during firmware upgrades, and during a Wi-Fi Protected

Setup connection. Flashes quickly when there is a Wi-Fi Protected Setup

error.

Back view

Ethernet ports

Wi-Fi Protected Setup button

Internet port Power port

Reset button

USB port

Ethernet portsConnect Ethernet cables (also called network cables)to these Gigabit (10/100/1000) ports, color coded blue, and to other

wired Ethernet network devices on your network.

Internet portConnect an Ethernet cable (also called a network orInternet cable) to this port, color coded yellow, and to your modem.

Wi-Fi Protected Setup buttonPress this button to easily configurewireless security on Wi-Fi Protected Setup-enabled network devices. For

more information, see Wireless Security on page 8.

USB portTo easily share disk storage with other users on your networkor on the Internet, connect a USB drive to this port. .

Reset buttonPress and hold this button for 5-10 seconds (until theport lights flash at the same time) to reset the router to its factory defaults.

You can also restore the defaults using the browser-based utility.

PowerConnect the included AC power adapter to this port.

CAUTIONUse only the adapter that came with your router.

Power buttonPress |(on) to turn on the router.


5/671

3

Setting Up Your E-Series RouterLinksys E-Series

3

Where to find more helpIn addition to this User Guide, you can find help at these locations:

Linksys.com/support (documentation, downloads, FAQs, technicalsupport, live chat, forums)

Setup CD (Troubleshooting Guide, legal and regulatory notices)

Cisco Connect help (run Cisco Connect, then click Learn More where

available)

Browser-based utility context-sensitive help (open the utility, then click

Helpin the right-side column.)

How to set up your routerThe easiest and fastest way to set up your router is to run the Cisco Connect

setup software.

How to start Cisco Connect

When you run the setup CD, Cisco Connect (your routers setup software) is

automatically installed onto your computer. You can then use Cisco Connect to

easily manage your router.

NOTE:If you lose your setup CD, you can download the software from

Linksys.com/support.

To start Cisco Connect for the first time:

1. Insert the CD into your CD or DVD drive.

2. Click Set up your Linksys Router.

If you do not see this:

For Windows, click Start, Computer, then double-click the CDdriveand the Setupicon.

For Mac, double-click the CDicon on your desktop, then double-clickthe Setupicon.

3. Follow the on-screen instructions to complete your router setup.

Use Cisco Connect to manage your router

After your router has been set up and Cisco Connect has been installed, you

can use Cisco Connect to easily manage many of your routers settings such as:

Connect devices to your network

Test your Internet connection speed

Configure parental controls

Set up guest access

Change your routers name and password

How to manually set up your routerAfter setting up the router with the setup software (located on the CD), the

router will be ready for use. If you would like to change its advanced settings,

or if the software does not run, use the routers browser-based utility.You can

access the utility with a web browser on a computer connected to the router.

For more information on using the utility, see How to open the browser-based

utility on page 4.

Setting Up Your E-Series Router


6/671

4

Advanced ConfigurationLinksys E-Series

4

How to open the browser-based utilityTo access some advanced settings, you need to open the browser-based utility.

To open the browser-based utility:

1. Run Cisco Connect, click Changeunder Router settings, click Advancedsettings, then click OK.

or

Open a web browser on a computer connected to your network, then go

to 192.168.1.1.

The router prompts you for a user name and password.

2. Enter the user name and password, then click OK. The utilitys main menuopens.

TIPSIf you set up your router without using Cisco Connect, your routers

default password is admin. (You can leave the user name blank.)

If you used Cisco Connect to set up your router, you can see your

routers user name and password by running Cisco Connect, then

clicking Router settings.

Advanced Configuration


7/671

5


Setup > Basic SetupThe first screen that appears is theBasic Setupscreen. This allows you to change

the routers general settings.

Language

Select your language To use a different language, select one from the drop-down menu. The language of the browser-based utility will change five seconds

after you select another language.

Internet Setup

The Internet Setupsection configures the router to your Internet connection.

Most of this information can be obtained through your Internet Service

Provider (ISP).

Internet Connection Type

Select the type of Internet connection your ISP provides from the drop-down

menu. The available types are:

Automatic Configuration - DHCP

Static IP

PPPoE

PPTP

L2TP

Telstra Cable

Automatic Configuration - DHCP

The default Internet Connection Type is Automatic Configuration - DHCP

(Dynamic Host Configuration Protocol). Keep the default only if your ISPsupports DHCP or if you connect using a dynamic IP address. (This option

usually applies to cable connections.)

Static IP

If you are required to use a fixed IP address to connect to the Internet, select

Static IP.

PPPoE

If you have a DSL connection, check whether your ISP uses Point-to-Point

Protocol over Ethernet (PPPoE). If so, select PPPoE.


8/671

6


PPTP

Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to

connections in Europe. If your PPTP connection supports DHCP or a dynamic IP

address, then select Obtain an IP Address Automatically. If you are required

to use a fixed IP address to connect to the Internet, then select Specify an IPAddressand configure the options below.

L2TP

Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to

connections in Israel.

Telstra Cable

Telstra Cable is a service that generally applies to connections in Australia.

Connect on Demand or Keep Alive

The Connect on Demand and Keep Alive options let you choose whether

the router connects to the Internet only as needed (useful if your ISP charges

for connect time), or if the router should always be connected. Select the

appropriate option.

Wireless > Basic Wireless SettingsThe basic settings for wireless networking are set on this screen.

NOTEAfter you set up the wireless network(s), set up the wireless security

settings.

Wireless Settings

Network Mode Select the wireless standards your network will support.

Mixed If you have Wireless-N (2.4 GHz), Wireless-G, and Wireless-B devicesin your network, keep the default, Mixed.

Wireless-B/G Only If you have both Wireless-B and Wireless-G (2.4 GHz)devices in your network, select Wireless-B/G Only.

Wireless-B Only If you have only Wireless-B devices, select Wireless-BOnly.

Wireless-G Only If you have only Wireless-G devices, select Wireless-G

Only. Wireless-N Only If you have only Wireless-N (2.4 GHz) devices, select

Wireless-N Only.

Disabled If you have no Wireless-B, Wireless-G, and Wireless-N (2.4 GHz)devices in your network, select Disabled.

NOTEIf you have a dual-band router, you can select Mixed, Wireless-A

Only, Wireless-N Only, or Disabled for the 5 GHz band.

If you are not sure which mode to use, keep the default, Mixed.


9/671

7


Network Name (SSID) The Service Set Identifier (SSID) is the network nameshared by all devices in a wireless network. It is case-sensitive and must not

exceed 32 keyboard characters. The default is Ciscofollowed by the last 5 digitsof the routers serial number, which is found on the bottom of the router. If

you used the setup software for installation, then the default Network Name is

changed to an easy-to-remember name.

NOTEIf you restore the routers factory default settings (by pressing

the Reset button or using the Administration> Factory Defaults

screen), the Network Name will return to its default value. Change

the Network Name back to its original name, or you will have to

reconnect all devices on your wireless network to the new network

name.

Channel Width For best performance in a network using Wireless-B,

Wireless-G and Wireless-N (2.4 GHz) devices, select Auto (20 MHz or 40 MHz).For a channel width of 20 MHz, keep the default, 20 MHz only.

Channel Select the channel from the drop-down list for Wireless-B, Wireless-G,and Wireless-N (2.4 GHz) networking. If you are not sure which channel to

select, then keep the default, Auto.

SSID Broadcast When wireless clients survey the local area for wirelessnetworks to associate with, they will detect the SSID broadcast by the router.

To broadcast the routers SSID, keep the default, Enabled. If you do not want tobroadcast the routers SSID, then select Disabled.


10/671

8

Wireless SecurityLinksys E-Series

8

Wireless > Wireless SecurityThe wireless security settings configure the security of your wireless network(s).

The router supports the following wireless security options: WPA2/WPA Mixed

Mode, WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2

Enterprise, WPA Enterprise, WEP, and RADIUS. (WPA stands for Wi-Fi Protected

Access. WEP stands for Wireless Equivalent Privacy. RADIUS stands for Remote

Authentication Dial-In User Service.)

Personal options

Security Option Strength

WPA2 Personal Strongest

WPA2/WPA Mixed ModeWPA2: Strongest

WPA: Strong

WPA Personal Strong

WEP Basic

Office options

The office options are available for networks that use a RADIUS server

for authentication. The office options are stronger than the personaloptions because WPA2 or WPA provides encryption while RADIUS provides

authentication.

Security Option Strength

WPA2 Enterprise Strongest

WPA2/WPA Enterprise Mixed

Mode

WPA2: Strongest

WPA: Strong

WPA Enterprise Strong

RADIUS Basic

Option settings

WPA2/WPA Mixed Mode, WPA2 Personal, WPA Personal

NOTESIf you select WPA2/WPA Mixed Mode as your Security Mode, each

device in your wireless network MUST use WPA2/WPA and the

same passphrase.

If you select WPA2 Personal as your Security Mode, each device

in your wireless network MUST use WPA2 Personal and the same

passphrase.

If you select WPA Personal as your Security Mode, each device

in your wireless network MUST use WPA Personal and the same

passphrase.

Passphrase Enter a passphrase of 8-63 characters. The default is password. Ifyou used the setup software for installation, then the default is changed to a

unique passphrase, which you can find by running Cisco Connect, then clickingRouter settings.

Wireless Security


11/671

9


WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA

Enterprise

These option is used in coordination with a RADIUS server. (These should only

be used when a RADIUS server is connected to the router.)

NOTESIf you select WPA2/WPA Enterprise Mixed Mode as your Security

Mode, each device in your wireless network MUST use WPA2/WPA

Enterprise and the same shared key.

If you select WPA2 Enterprise as your Security Mode, each device

in your wireless network MUST use WPA2 Enterprise and the same

shared key.

If you select WPA Enterprise as your Security Mode, each device

in your wireless network MUST use WPA Enterprise and the same

shared key.

RADIUS Server Enter the IP address of the RADIUS server.

RADIUS Port Enter the port number of the RADIUS server. The default is 1812.

Shared Key Enter the key shared between the router and the server.

WEP

WEP is a basic encryption method, which is not as secure as WPA.

NOTE:

If you select WEP as your Security Mode, each device in yourwireless network MUST use WEP and the same encryption and

shared key.

Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits).

Passphrase Enter a passphrase to automatically generate WEP keys. Thenclick Generate.

Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually.

TX Key Select a default TX (Transmit) Key to use. The default is 1.


12/671

10


RADIUS

This option features WEP used in coordination with a RADIUS server. ( This

should only be used when a RADIUS server is connected to the router.)

NOTE:If you select RADIUS as your Security Mode, each device in your

wireless network MUST use RADIUS and the same encryption and

shared key.

RADIUS Server Enter the IP address of the RADIUS server.

RADIUS Port Enter the port number of the RADIUS server. The default is 1812.

Shared Secret Enter the key shared between the router and the server.

Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits).

Passphrase Enter a passphrase to automatically generate WEP keys. Thenclick Generate.

Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually.

TX Key Select a default TX (Transmit) Key to use. The default is 1.

Disabled

If you choose to disable wireless security, you will be informed that wireless

security is disabled when you first attempt to access the Internet. You will given

the option to enable wireless security, or confirm that you understand the risks

but still wish to proceed without wireless security.


13/671

11

TroubleshootingLinksys E-Series

11

This chapter can help you solve common setup issues and connect to the

Internet. Your routers CD includes Cisco Connect, the router setup software

that makes it easy to connect network devices, change router settings, control

guest access, enable parental controls, and connect to the Internet. Cisco

Connect is also installed onto your computer during setup. If Cisco Connect

is prevented from completing the setup, this chapter will guide you through

finding solutions.

You can find more help from our award-winning customer support at

linksys.com/support.

How to run Cisco Connect after setupWhen you run the setup CD, Cisco Connect is automatically installed onto your

computer. You can then use Cisco Connect to easily manage your network.

To start Cisco Connect on a Windows computer:

1. Click Start, All Programs, then click Cisco Connect.

The Cisco Connect main menu opens.

To start Cisco Connect on a Mac OS X computer:

1. Open Finder and click Applicationsin the left panel.

2. Double-click the Cisco Connecticon.

The Cisco Connect main menu opens.

Troubleshooting


14/671

12


Your router was not successfully set up

If Cisco Connect did not complete the setup, you can try the following:

Press and hold the Reset button on your router with a paperclip or pinfor 10-15 seconds, then run the Setupprogram again on the routers CD.


Temporarily disable your computers firewall (see the security softwares

instructions for help), then run the Setupprogram again on the routersCD.

If you have another computer, use that computer to run the Setup

program again on the routers CD.

Get Windows XP Service Pack 3 messageOn Windows XP computers, Cisco Connect requires Service Pack 3 in order to

work. If you receive a Get Windows Service Pack 3 message when setting up

your router for the first time, follow these troubleshooting steps.

If the currently installed Service Pack is older than version 3, you need to

download and install Service Pack 3.

TIP

To temporarily connect to the Internet and download the requiredService Pack, you can use the included Ethernet cable to connect

your computer directly to your modem.

To install Service Pack 3:

1. Click the link in the Cisco Connect error message or connect to the

Microsoft Update website (update.microsoft.com/windowsupdate).

2. Follow the instructions on the website or contact Microsoft if you need

further help.

3. After downloading and installing Service Pack 3, run the Setupprogramon your routers CD.
http://-/?-http://-/?-


15/671

13


Your Internet cable is not plugged in

messageIf you get a Your Internet cable is not plugged in message when trying to set

up your router, follow these troubleshooting steps.

To fix the problem:

1. Make sure that an Ethernet or Internet cable (or a cable like the one

supplied with your router) is securely connected to the yellow Internetport on the back of the router and to the appropriate port on your

modem. This port on the modem is usually labeled Ethernet, but maybe named Internetor WAN.

Back view of router

Back view of cable modem

Back view of DSL modem

2. Make sure that your modem is connected to power and is turned on. If it

has a power switch, make sure that it is set to the ONor lposition.

3. If your Internet service is cable, verify that the cable modemsCABLE portis connected to the coaxial cable provided by your ISP.

Or, if your Internet service is DSL, make sure that the DSL phone line is

connected to the modems DSL port.

4. If your computer was previously connected to your modem with a USB

cable, disconnect the USB cable.

5. Return to the Cisco Connect window and click Nextto try again. If thewindow has already been closed, run the Setupprogram again on therouters CD.


16/671

14


Cannot access your routermessageIf you cannot access your router because your computer is not connected to

your network, follow these troubleshooting steps.

To access your router, you must be connected to your own network. If you

currently have wireless Internet access, the problem may be that you have

accidentally connected to a different wireless network.

To fix the problem on Windows computers:

1. On your Windows desktop, right-click the wireless icon in the system tray.

2. Click View Available Wireless Networks. A list of available networksappears.

3. Click your own network name, then click Connect. In the examplebelow, the computer was connected to another wireless network named

JimsRouter. The name of the Linksys E-Series network, BronzeEaglein this

example,is shown selected.

4. If you are prompted to enter a network key, type your password (Security

Key) into the Network keyand Confirm network keyfields, then clickConnect.

Your computer connects to the network, and you should now be able to

access the router.


17/671

15


To fix the problem on Mac computers:

1. In the menu bar across the top of the screen, click the AirPort icon. A listof wireless networks appears. Cisco Connect has automatically assigned

your network a name.

In the example below, the computer was connected to another wirelessnetwork named JimsRouter. The name of the Linksys E-Series network,

BronzeEaglein this example,is shown selected.

2. Click the wireless network name of your Linksys E-Series router

(BronzeEaglein the example).

3. Type your wireless network password (Security Key) into the Passwordfield, then click OK.

Device not foundmessageIf you get a Device not found message when trying to connect a network

device (such as an iPhone, iPod, or smartphone), follow these troubleshooting

steps.

TIPFor a stronger signal during initial setup, move your wireless

devices near your router. Long distances make it harder for the

router to detect the devices.

To fix the problem:

1. Run Cisco Connect.


18/671

16


2. Click Computers and devices. The Computers and other deviceswindowappears.

3. Click Other Wireless devices.

4. Enable your wireless network devices Wi-Fi connection, then search for

your wireless network name. See your device documentation for help.

NOTEYour wireless device must support WPA/WPA2.

5. On the wireless network device, select the network name of your router

and enter the password (Security Key).

6. In Cisco Connect, click Next.

Example: On your Smartphone or other wireless device, locate the Wi-Fi menu and search for available wireless networks. In this example,

using the network information provided by Cisco Connect shown in the

previous screen, click BronzeEagle.

Android iPhone

7. Enter the password (Security Key) provided by Cisco Connect. In this

example, the security key is B6eM9UkCjz.

NOTEThe password is case sensitive. Make sure that you enter letters in

the correct case.

8. When your wireless device is successfully connected to your wireless

network, enter a name for the device in Cisco Connect, then click Finish.


19/671

17

SpecificationsLinksys E1200

17

Linksys E1200Model Name Linksys E1200

Description Wireless-N Router

Model Number E1200

Standards 802.11n, 802.11g, 802.11b,

802.3u

Ports Power, Internet, and Ethernet (1-4)

Buttons Reset, Wi-Fi Protected Setup

LEDs Power/Wi-Fi Protected Setup,

Internet, Ethernet (1-4)

Cabling Type CAT 5e

Transmitted Power 802.11n (20 MHz):

15.0 1.5dBm @ CH6, MCS 0~4, MCS 8~12

13.5 1.5dBm @ CH6, MCS 5~7, MCS 13~15

802.11n (40 MHz):

14.0 1.5dBm @ CH6, MCS 0~4, MCS 8~12

13.5 1.5dBm @ CH6, MCS 5~7, MCS 13~15

802.11g:

14.5 1.5dBm @ CH6, all rates

802.11b:16.5 1.5dBm @ CH6, all rates

Antenna Gain 2.5 dBi, 4.0 dBi (2 antennas)

UPnP Supported

Wireless Security Wi-Fi Protected Access 2 (WPA2),

WEP, wireless MAC filtering

Security Key Bits Up to 128-bit encryption

EnvironmentalDimensions 188.7 151.7 31.2 mm

(7.43 5.97 1.23)

Unit Weight 252.7g (8.91 oz.)

Power 12V, 0.5A

Certifications FCC, UL/cUL, ICES-003, RSS210,

CE, Wi-Fi (IEEE 802.11b/g/n),

WPA2, WMM, Wi-Fi Protected

Setup, Windows 7

Operating Temp. 0 to 40C (32 to 104F)

Storage Temp. -20 to 60C (-4 to 140F)

Operating Humidity 10 to 80% non-condensing

Storage Humidity 5 to 90% non-condensing

NOTESFor regulatory, warranty, and safety information, see the CD that

came with your router or go to Linksys.com/support.

Specifications are subject to change without notice.

Maximum performance derived from IEEE Standard 802.11

specifications. Actual performance can vary, including lower

wireless network capacity, data throughput rate, range and

coverage. Performance depends on many factors, conditions and

variables, including distance from the access point, volume of

network traffic, building materials and construction, operating

system used, mix of wireless products used, interference and other

adverse conditions.

Specifications


20/671

18



Description Wireless-N Router with SpeedBoost

Model Number E1500Standards 802.11n, 802.11g, 802.11b,

802.3u

Ports Power, Internet, and Ethernet (1-4)


LEDs Power/Wi-Fi Protected Setup,

Internet, Ethernet (1-4)

Cabling Type CAT 5e

Transmitted Power 802.11n (20 MHz):

17.0 1.5 dBm @ CH6, MCS 0~4, MCS 8~12

16.0 1.5 dBm @ CH6, MCS 5~7, MCS 13~15 802.11n (40 MHz):

15.5 1.5 dBm @ CH6, MCS 0~4, MCS 8~12

14.0 1.5 dBm @ CH6, MCS 5~7, MCS 13~15

802.11g:

18.0 1.5 dBm @ CH6, 6 Mbps

17.0 1.5 dBm @ CH6, 54 Mbps

802.11b:

18.0 1.5 dBm @ CH6, all rates

Antenna Gain 3.0 dBi, 4.0 dBi, 4.5 dBi

(3 antennas)UPnP Supported

Wireless Security Wi-Fi Protected Access 2 (WPA2),

WEP, wireless MAC filtering


Environmental

Dimensions 188.7 151.7 31.2 mm

(7.43 5.97 1.23)

Unit Weight 254.1g (8.96 oz.)

Power 12V, 0.5A

Certifications FCC, UL/cUL, ICES-003, RSS210,

CE, Wi-Fi (IEEE 802.11b/g/n),

WPA2, WMM, Wi-Fi Protected

Setup, Windows 7



Operating Humidity 10 to 80% non-condensing











system used, mix of wireless products used, interference and otheradverse conditions.


21/671

19



Description Advanced Dual-Band N Router

Model Number E2500Standards 802.11n, 802.11a, 802.11g, 802.11b, 802.3,

802.3u, 802.3ab

# of Antennas 4 total, 2 internal antennas per each

2.4 GHz & 5 GHz radio band

Detachable (y/n) No

Modulation 802.11b: CCK, QPSK, BPSK

802.11g: OFDM

802.11a: OFDM

802.11n: BPSK, QPSK, 16-QAM,

64-QAM

Receive Sensitivity 2.4 GHz

(Typical) 802.11b: -87 dBm @ 11 Mbps

802.11g: -70 dBm @ 54 Mbps

802.11n 20 MHz: -70 dBm @ MCS15

802.11n 40 MHz: -66 dBm @ MCS15

5 GHz

802.11a: -70 dBm @ 54 Mbps

802.11n 20 MHz: -66 dBm @ MCS23

802.11n 40 MHz: -62 dBm @ MCS23

Antenna Gain in dBi 2.4 GHz:

Antenna 1 (right rear): 2.94 dBiAntenna 2 (front right): 3.78 dBi

5 GHz:

Antenna 1 (right front): 5.86 dBi

Antenna 2 (front left): 4.88 dBi

UPnP Supported

Security features WEP, WPA, WPA2

Security key bits Up to 128-bit encryption

Environmental

Dimensions 225 x 35 x 180 mm

(8.86 x 1.38 x 7.09)

Unit Weight 452 g (15.94 oz)

Power 12V, 1A

Certifications FCC, IC, CE, Wi-Fi A/B/G/N



Operating Humidity 10 to 80%, relative humidity,

non-condensing












adverse conditions.


22/671

20



Description High Performance Dual-Band N Router


802.3u, 802.3ab

# of Antennas 6 total, 3 internal antennas per

each 2.4 GHz & 5 GHz radio band

Detachable (y/n) No

Switch Port Speed 10/100/1000 Mbps

Ports Internet, Ethernet (1-4), USB, Power


LEDs Power, Ethernet (1-4)

Modulation 802.11b: CCK, QPSK, BPSK

802.11g: OFDM

802.11a: OFDM

802.11n: BPSK, QPSK, 16-QAM, 64-QAM


802.11b: -87 dBm @ 11 Mbps (Typical)

802.11g: -77 dBm @ 54 Mbps (Typical)

802.11n (20 MHz): -71 dBm @ MCS15 (Typical)

802.11n (40 MHz): -68 dBm @ MCS15 (Typical)

5 GHz

802.11a: -75 dBm @ 54 Mbps (Typical)802.11n 20 MHz: -70 dBm @ MCS15 (Typical)

802.11n 40 MHz: -67 dBm @ MCS15 (Typical)

Antenna Gain 2.4 GHz (Dipole Antennas)

Antenna 1 3 dBi

Antenna 2 4 dBi

Antenna 3 4 dBi

5 GHz (Dipole Antennas)

Antenna 1 4.5 dBi

Antenna 2 4.5 dBi

Antenna 3 4.5 dBi

UPnP Supported

Security features WEP, WPA, WPA2

Security key bits Up to 128-bit encryption

Storage File System Support FAT, and NTFS, and HFS+

Environmental


(6.69 x 0.98 x 7.48)


Power 12V, 2A

Certifications FCC, IC, CE, Wi-Fi A/B/G/N



Operating Humidity 10 to 80% relative humidity,

non-condensing









variables, including distance from the access point, volume ofnetwork traffic, building materials and construction, operating


adverse conditions.


23/671

21



Description Maximum Performance Wireless-N Router


802.3u, 802.3ab

Radio Frequency 2.4 and 5 GHz

Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet)

Ports Power, USB, Internet, Ethernet (1-4)


LEDs Top panel: Power

Back panel: Internet, Ethernet (1-4)

Number of Antennas 6 total, 3 internal antennas per

each 2.4 GHz and 5 GHz radio band

Detachable (y/n) No

Modulations 802.11b: CCK, QPSK, BPSK

802.11g: OFDM

802.11a: OFDM

802.11n: BPSK, QPSK, 16-QAM, 64-QAM


802.11b: -87 dBm @ 11 Mbps (Typical)

802.11g: -77 dBm @ 54 Mbps (Typical)

802.11n: 20 MHz: -71 dBm @ MCS15 (Typical)

802.11n: 40 MHz: -68 dBm @ MCS15 (Typical) 5 GHz

802.11a: -71 dBm @ 54 Mbps (Typical)



Antenna Gain in dBi 2.4 GHz (3 internal PIFA antennas)

PIFA 1 3.6 dBi (Right)

PIFA 2 3.8 dBi (Left)

PIFA 3 3.8 dBi (Front)

5 GHz (3 internal PIFA antennas)

PIFA 1 4.8 dBi (Right)

PIFA 2 5.3 dBi (Left)PIFA 3 5.2 dBi (Front)

Supported File Systems

for Storage Device FAT32, NTFS, and HSF+

UPnP Supported

Security Features WEP, WPA, WPA2


Environmental


(8.86 x 0.98 x 6.30)


Power 12V, 2A

Certifications FCC, IC, CE, Wi-Fi a/b/g/n,

Windows 7



Operating Humidity 10 to 80% relative humidity,

non-condensing






specifications. Actual performance can vary, including lowerwireless network capacity, data throughput rate, range and





adverse conditions.


24/671

3425-TBD

Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries.

A listing of Ciscos trademarks can be found at www.cisco.com/go/trademarks. All other trademarks mentioned in this document are the property of their respective owners.

2011 Cisco and/or its affiliates. All rights reserved.

Visit linksys.com/support for award-winning technical support


25/671

E-Series


26/671

i

Linksys E-Series

1 E1200/E1500/E2500/E3200

1 1 2 E4200

2 2

E-Series3 3 3 Cisco Connect 3 Cisco Connect 3

4 5 )( Basic Setup > )( Setup5 ( Language(5 )( Internet Setup6 ( Wireless( Basic Wireless Settings > )(6

8 )( Wireless Security > )( Wireless8 8 8

11 Cisco Connect 12 12 (Windows XP Service Pack 3 ( Get Windows XP Service Pack 3 13 ) ( Your Internet cable is not plugged in 14 ( ( Cannot access your router

17 Linksys E1200

18 Linksys E1500

19 Linksys E2500

20 Linksys E3200

21 Linksys E4200
http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-


27/671

1

Linksys E-Series

1

E1200/E1500/E2500/E3200

Ethernet Wi-Fi )( Internet

) E3200( USB

)E3200) USB

. USB Fast Ethernet ) ( Ethernet Ethernet

)E3200E2500 10/100/1000( )E1500E1200 10/100(Ethernet.

) Ethernet )( Internet . ( Wi-Fi .Wi-Fi

8.

.Wi-Fi

.Wi-Fi .Wi-Fi .

.

. ) ( |

) ) )1015 Reset

. ) .


28/671

2

Linksys E-Series

E4200

.Wi-Fi

.Wi-Fi .Wi-Fi

Ethernet Wi-Fi

)( Internet )( Reset

USB ) ( Ethernet Ethernet

Ethernet. ))10/100/1000 ( ( Ethernet )( Internet

. Wi-Fi

.Wi-Fi 8.

USB. . USB

) ) )1015 Reset. )

. .

.

. ) ( |


29/671

3

E-Series Linksys E-Series

:

( Linksys.com/support)

)( )Cisco Connect ( Cisco Connect )

).

.Cisco Connect Cisco Connect

( Cisco Connect Cisco Connect . )

.:

.Linksys.com/support

Cisco Connect: 1..DVD2..(Lynksys( Set up your Linksys Router

: Windows

.)( Setup Mac

.)( Setup 3..

Cisco Connect Cisco Connect Cisco Connect

:

) ( . . .

4.

E-Series


30/671

4

Linksys E-Series

.

: 1.) ( Router settings) ( ChangeCisco Connect

.)( OK)( Advanced settings

192.168.1.1..

2..)( OK .Cisco Connect

.( ( .admin Cisco Connect Router settingsCisco Connect

.)(


31/671

5

Linksys E-Series

)( Basic Setup > )( Setup .) ( Basic Setup

. )( Language

. ( ( Select your language.

)( Internet Setup. ) ( Internet Setup

. ) ( Internet Connection Type

. :

(DHCP - ( Automatic Configuration - DHCP) IP( Static IPPPPoE

PPTP

L2TP

(Telstra ( Telstra Cable(DHCP- ( Automatic Configuration - DHCP

( )DHCP- ( Automatic Configuration - DHCP .) ( .IP DHCP

.)) IP( Static IP

.) IP( Static IP IP PPPoE

DSL .PPPoE .)PPPoE( Ethernet


32/671

6

Linksys E-SeriesPPTP

))PPTP Obtain an IP Address Automatically IP DHCP PPTP .Specify IP .(IP (

. )IP ( an IP AddressL2TP

))L2TP 2 .

(Telstra ( Telstra Cable . Telstra

) ( Keep Alive ) ( Connect on Demand( ( Keep Alive) ( Connect on Demand (

.. )

Basic Wireless Settings > )( Wireless)(

.

. )(

. ( Network Mode( ( 2.4( N- )( Mixed

.)( Mixed B-G- )B/G- ( Wireless-B/G Only

Wireless-B/G Only 2.4 ( ( G-B-.)B/G- (

B- )B-( Wireless-B Only.)B-( Wireless-B Only

G- )G-( Wireless-G Only.)G- ( Wireless-G Only

N- )N-( Wireless-N Only.)N- ( Wireless-N Only) 2.4 (

G-B- )( Disabled.)( Disabled) 2.4 ( N-

Wireless-A Only )( Mixed Dis- )N-( Wireless-N Only )A(-

)5 . ( abledMixed

.)(


33/671

7

Linksys E-Series)SSID( ))SSID( ( )SSID( Network Name32 . Cisco..

.

( ( Factory Defaults> )( Administration((.

. ) ( Channel Width20 MHz or( Auto) 2.4 ( N-G-B- 20.)) 40 20( ( )40 MHz

.) 20( 20 MHz only B- )( Channel .) 2.4 ( N-G-

.) ( Auto )SSID ( SSID BroadcastSSID . SSID SSID .)( Enabled

.)( Disabled


34/671

8

Linksys E-Series

( Wireless Security > )( Wireless)

.)( WPA2 Personal ) WPA2/WPA ( WPA2/WPA Mixed Mode : WPA2/ ( WPA2/WPA Enterprise Mixed Mode)WPA( WPA Personal)WPA2( WEP ( WPA( WPA Enterprise ( WPA2( WPA2 Enterprise ) WPAWEP .Wi-Fi WPA ( .RADIUS RADIUS .

).

)WPA2( WPA2 Personal

WPA2/ ( WPA2/WPA Mixed Mode)WPA:WPA2:WPA

)WPA( WPA PersonalWEP

. RADIUS

RADIUS. WPA WPA2

WPA2( WPA2 Enterprise(( WPA2/WPA Enterprise Mixed Mode

)WPA2/WPA:WPA2:WPAWPA( WPA Enterprise(

RADIUS

WPA2( WPA2 Personal )WPA2/WPA( WPA2/WPA Mixed Mode

)WPA( WPA Personal )

( Security Mode )WPA2/WPA ( WPA2/WPA Mixed Mode WPA2/WPA )

. ) ( Security Mode ) WPA2( WPA2 Personal ) WPA2( WPA2 Personal

. ) ( Security Mode ) WPA( WPA Personal )WPA( WPA Personal

.

. 8-63 ) ) Passphrase .password.)( Router settingsCisco Connect


35/671


36/671

10

Linksys E-SeriesRADIUS

WEP ( .RADIUS ). RADIUS

:)( Security Mode RADIUS

.RADIUS

.RADIUSIP )RADIUS( RADIUS Server.RADIUS1812. )RADIUS( RADIUS Port

. )( Shared Secret 10( )hex digits 10 bit40/64) WEP )( Encryption 26( )hex digits 26( 104/128-bit ) 40/64hex digits( )1040/64 10bit40/64).) 104/128

.)Generate. WEP ) ) Passphrase

)(.. WEP ) ( )1-4( Key 1-4

.1. )( TX )( TX Key

)( Disabled .

.


37/671

11

Linksys E-Series

. Cisco Connect Cisco Connect . Cisco Connect .

.

.linksys.com/support

Cisco Connect Cisco Connect

Cisco Connect . .:Windows Cisco Connect

1..Cisco Connect

.Cisco Connect:Mac OS X Cisco Connect

1..)( Applications

2..Cisco Connect

.Cisco Connect


38/671

12

Linksys E-Series

: Cisco Connect )( Reset )( Setup 1510

.

( . ) (Setup )

)( Setup .

( Get Windows XP Service Pack 3(Windows XP Service Pack 3

Service Pack 3 Cisco Connect Windows XP )Windows Service Pack 3 ( Get Windows Service Pack 3 .

.

Service Pack 3. 3

. Ethernet:Service Pack 3

1. Cisco Connect .Microsoft )update.microsoft.com/windowsupdate(

2..Microsoft 3.)( Setup Service Pack 3

.


39/671

13

Linksys E-Series

( Your Internet cable is not plugged in )

) ( Your Internet cable is not plugged in .

:) .1 ( Ethernet

. )( Internet )( Internet Ethernet

.WAN

DSL2. .

.l) ( ON3.)( CABLE

. .DSL DSL DSL

4..USBUSB 5. . ( Next) Cisco Connect

. )( Setup


40/671

14

Linksys E-Series

( Cannot access your router (

.

. . :Windows

1.. Windows

2.. .

. .3Linksys E-Series .JimsRouter

. BronzeEagle

4. ) ( .

.


41/671

15

Linksys E-Series:Mac

1.. .AirPort. Cisco Connect

.JimsRouter . BronzeEagleLinksys E-Series

2. BronzeEagle( Linksys E-Series .)

3.. ))

) ( Device not found( ( Device not found)

. ) iPod iPhone

. .

:1..Cisco Connect


42/671

16

Linksys E-Series2.Computers and.) ( Computers and devices

.) ( other devices3..)( Other Wireless devices

4.

Wi-Fi ..

.WPA/WPA2

5..)( 6..)( NextCisco Connect

Wi-Fi : Cisco Connect .

.BronzeEagle

Android iPhone

7.

.Cisco Connect )( .B6eM9UkCjz

. .

8.Cisco Connect )(. Finish


43/671

17

Linksys E1200

Linksys E1200

Linksys E1200 N-

E1200 802.3u 802.11b 802.11g 802.11n

(1-4( Ethernet)( Internet )) Reset )Wi-Fi Protected Setup(Wi-FiWi-Fi /

(1-4( Ethernet CAT 5e

)20 (: 802.11n MCS 8~12 MCS 0~4 CH6@ /1.5 15.0

MCS 13~15 MCS 5~7 CH6@ /1.5 13.5)40 (: 802.11n

MCS 8~12 MCS 0~4 CH6@ /1.5 14.0MCS 13~15 MCS 5~7 CH6@ /1.5 13.5

:802.11gCH@ /1.5 14.5:802.11bCH@ /1.5 16.54.0 2.5

)( UPnP Wi-Fi Wi-Fi Protected Access 2 )WPA2(MAC WEP 128

31.2 151.7 188.7 ( 1.23 5.97 7.43(

)8.91.( 252.7 0.5 12 RSS210 ICES-003 UL/cUL FCC )IEEE 802.11b/g/n( Wi-Fi CE WMM WPA2

Wi-FiWindows 7 )32 040 )104 -4( -2060 )140 80%10 90%5

.Linksys.com/support .

.IEEE 802.11 .

.


44/671

18

Linksys E1500

Linksys E1500

Linksys E1500 SpeedBoost N-

E1500 802.3u 802.11b 802.11g 802.11n

(1-4( Ethernet)( Internet Wi-Fi )) Reset Wi-Fi /

(1-4( Ethernet CAT 5e

)20 (: 802.11n MCS 8~12 MCS 0~4 CH6@ /1.5 17.0

MCS 13~15 MCS 5~7 CH6@ /1.5 16.0)40 (: 802.11n

MCS 8~12 MCS 0~4 CH6@ /1.5 15.5MCS 13~15 MCS 5~7 CH6@ /1.5 14.0

:802.11g 6 CH6@ /1.5 54 18.0 CH6@ /1.5 17.0:802.11bCH6@ /1.5 18.04.0 3.0 4.5

)3( UPnP )WPA2( Wi-Fi2 MAC WEP 128

31.2 151.7 188.7

( 1.23 5.97 7.43()8.96( 254.1

0.5 12 RSS210 ICES-003 UL/cUL FCC )IEEE 802.11b/g/n( Wi-Fi CE Wi-Fi Protected WMM WPA2

Windows 7 Setup32( 040 )104 -4( -2060 )140 80%10

90%5


. .IEEE 802.11 .

.


45/671

19

Linksys E2500

Linksys E2500

Linksys E2500 N E2500

802.3 802.11b 802.11g 802.11a 802.11n 802.3ab 802.3u 4 5 2.4

)/( BPSK QPSK CCK :802.11b

OFDM :802.11g

OFDM :802.11a16-QAM QPSK BPSK :802.11n64-QAM

2.4 11@ /-87 :802.11b ) (@54 /-70 :802.11gMCS15@ /-70: 802.11n 20MCS15@ /-66: 802.11n 5 40 @54 /-70 :802.11aMCS23@ /-66: 802.11n 20MCS23@ /-62: 802.11n 40

2.4 : 2.94 :)( 1 )3.78 :) 2

5 : )5.86 :) 1 )(: 4.88 2 UPnP WPA2 WPA WEP 128

180 35 225

( 7.09 1.38 8.86()15.94( 452

121 FCCICCEWi-Fi A/B/G/N 32( 040

)104 -4( -2060 )140 80%10 90%5


.IEEE 802.11 .

.


46/671

20

Linksys E3200

Linksys E3200

Linksys E3200 N E3200

802.3 802.11b 802.11g 802.11a 802.11n 802.3ab 802.3u3 6 5 2.4

)/( 10/100/1000 USB)1-4( Ethernet)( Internet Wi-Fi )) Reset

(1-4( Ethernet BPSK QPSK CCK :802.11b

OFDM :802.11g

OFDM :802.11a64-QAM 16-QAM QPSK BPSK :802.11n 2.4 11@ /-87 :802.11b

) @54 ) /-77 :802.11g) (

MCS15@ /-71:) 20( 802.11n) (

MCS15@ /-68:) 40( 802.11n) 5 ) @54 /-75:802.11a) (

MCS15@ /-70: 20802.11n) (

MCS15@ /-67: 40802.11n) (

)( 2.4 31 42 43 )( 5 4.5 1 4.5 2 4.5 3

UPnP

WPA2 WPA WEP 128HFS+NTFSFAT

190 25 170

( 7.48 0.98 6.69()7.62( 216 212

Wi-Fi A/B/G/N CE IC FCC 32( 040 )104 -4( -2060 )140

80%10 90%5


. .IEEE 802.11 .

.

Li k E4200


47/671

21

Linksys E4200

Linksys E4200

Linksys E4200 N E4200 802.11n802.11a802.11g802.11b802.3

802.3u802.3ab 52.4 ) Ethernet( 10/100/1000 (1-4( Ethernet)( Internet USB Wi-Fi )) Reset : Ethernet )1-4()( Internet : 3 6 5 2.4 )/(

BPSK QPSK CCK :802.11b OFDM :802.11g

OFDM :802.11a

QAM-64 16-QAM QPSK BPSK :802.11n 2.4 11@ /-87 :802.11b) @54 ) /-77 :802.11g) (

MCS15@ /-71: 20 :802.11n) (MCS15@ /-68: 40 :802.11n) 5 ) @54 /-71 :802.11a) (

MCS23@ /-70: 20 :802.11n) (

MCS23@ /-68: 40 :802.11n) (

PIFA( 3( 2.4 )( 3.6 PIFA 1 )( 3.8 PIFA 2)( 3.8 PIFA 3

PIFA( 3( 5 )( 4.8 PIFA 1)( 5.3 PIFA 2)( 5.2 PIFA 3

HSF+NTFSFAT32 UPnP WPA2 WPA WEP 128

160 25 225

( 6.30 0.98 8.86()12.52( 355 212

Wi-Fi a/b/g/n CE IC FCC Windows 732( 040

)104 -4( -2060 )140 80%10 90%5


.IEEE 802.11 .

.


48/671

3425-TBD

. /Cisco CiscoLinksysCisco . .www.cisco.com/go/trademarks Cisco

.. /Cisco 2011

linksys.com/support


49/671

E-Series

Linksys E Series


50/671

i

Linksys E-Series

E1200/E1500/E2500/E3200 . . . . . . . . . . . . . . . . . . . . . . . . . 1

1

1

E4200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2

2

E-Series

. . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Cisco Connect 3

Cisco Connect 3

. . . . . . . . . . . . . . . . . . . . . 3

- . . . . . . . . . . 4

Setup > Basic Setup ( > ) . . . . . . 5Language () 5

Internet Setup ( ) 5

Wireless > Basic Wireless Settings ( > ) . . . . . . . . . . . . . . . . . . . . 6

6

Wireless > Wireless Security ( >

) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 8

8

8

Cisco Connect . . . . . . . .11

. . . . . . . . . . . . . . . . . .12

Get Windows XP Service Pack 3( Windows XP Service Pack 3) . . . . . . . . . . . . . . . . . 12

Your Internet cable is not plugged in( ) . . . . . . . . . . . . . . . 13

Cannot access your router( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Device not found ( ) . . . . . 15

Linksys E1200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Linksys E1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Linksys E2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Linksys E3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Linksys E4200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Linksys E-Series


51/671

1

Linksys E-Series

1

E1200/E1500/E2500/E3200

Ethernet Wi-Fi Protected Setup

USB ( E3200)

USB ( E3200)- , USB

. Ethernet - Ethernet (

) Fast Ethernet (10/100, E1200 E1500) Gigabit (10/100/1000, E2500 E3200), , Ethernet .

- Ethernet ( ) , , .

Wi-Fi Protected Setup - , Wi-Fi Protected Setup.

. 8.

- , Wi-Fi Protected Setup. , Wi-Fi Protected Setup. , Wi-FiProtected Setup.

- .

, .

- | (.) .

- 5-10 ( ), . , -.

Linksys E-Series


52/671

2

Linksys E Series

E4200

- , Wi-Fi Protected Setup. , Wi-Fi Protected Setup. , Wi-Fi Protected Setup.

Ethernet

Wi-Fi Protected Setup

USB

Ethernet - Ethernet ( ) Gigabit (10/100/1000), , Ethernet .

- Ethernet ( ) , , .

Wi-Fi Protected Setup - , Wi-Fi Protected Setup. . 8.

USB - , USB .

- 5-10 ( ), . , -.

- .

, .

- | (.) .

E-SeriesLinksys E-Series


53/671

3

E SeriesLinksys E Series

:

Linksys.com/support (, , , , , )

( , )

Cisco Connect ( Cisco Connect, " ", )

- - (

, .)

- Cisco Connect.

Cisco Connect

, Cisco Connect (

) . Cisco Connect, .

:

, Linksys.com/support.

Cisco Connect :

1. CD DVD .

2. Set up your Linksys Router( Linksys).

:

Windows, , , CD .

Mac, CD , Setup().

3. , .

Cisco Connect

Cisco Connect, , :

( ) . , -. , .

- . 4.

E-Series

Linksys E-Series


54/671

4

Linksys E Series

- -.

-:

1. Cisco Connect, Change () Router settings( ), Advanced settings( ) OK.

, , 192.168.1.1.

.

2. -

OK. .

Cisco Connect, admin. ( .)

Cisco Connect, , , Cisco Connect Router settings( ).

Linksys E-Series


55/671

5

Linksys E Series

Setup > Basic Setup ( >

) , Basic Setup (). .

Language ()

Select your language ( ) , . -

.

Internet Setup ( )

Internet Setup ( ) . .

Internet Connection Type ( )

, , . :

Automatic Configuration - DHCP ( - DHCP)

Static IP ( IP)

PPPoE

PPTP

L2TP

Telstra Cable

Automatic Configuration - DHCP (

- DHCP)

Automatic Configuration - DHCP( - DHCP) ( ). DHCP IP. ( .)

Static IP ( IP)

IP , Static IP( IP).

PPPoE

DSL , " " Ethernet (PPPoE). ,

PPPoE.

Linksys E-Series


56/671

6

y

PPTP

(PPTP) , . PPTP DHCP IP , Obtain an IP Address Automatically( IP ). IP

, Specify an IP Address( IP) -.

L2TP

2 (L2TP) , .

Telstra Cable

Telstra Cable , .

Connect on Demand ( ) Keep

Alive ( ) ( , ) . .

Wireless > Basic Wireless Settings

( >

)

.

, .

Network Mode ( ) , .

Mixed () Wireless-N (2,4 GHz),Wireless-G Wireless-B , Mixed().

Wireless-B/G Only ( Wireless-B/G) Wireless-B, Wireless-G (2,4 GHz) , Wireless-B/G

Only( Wireless-B/G).

Wireless-B Only ( Wireless-B) Wireless-B , Wireless-B Only( Wireless-B).

Wireless-G Only ( Wireless-G) Wireless-G , Wireless-G Only( Wireless-G).

Wireless-N Only ( Wireless-N) Wireless-N (2,4 GHz), Wireless-N Only( Wireless-N).

Disabled () Wireless-B, Wireless-G Wireless-N (2,4 GHz) , Disabled().

Linksys E-Series


57/671

7

y

, Mixed (), Wireless-A Only ( Wireless-A), Wireless-N Only( Wireless-N) Disabled () 5 GHz.

, Mixed().

Network Name (SSID) ( ) (SSID) , . 32 . Cisco, 5 , . , .

( Reset () Administration() > Factory Defaults( ), Network Name ( ) . , .

Channel Width ( ) - , Wireless-B, Wireless-G Wireless-N (2,4 GHz) , Auto(20 MHz or 40 MHz)( 20 MHz 40 MHz). 20MHz 20 MHz only( 20 MHz).

Channel () Wireless-B, Wireless-G Wireless-N (2,4 GHz) . , Auto().

SSID Broadcast (SSID ) , , SSID . SSID , Enabled(). SSID , Disabled().

Linksys E-Series


58/671

8

y

Wireless > Wireless Security ( > ) (). : WPA2/WPA Mixed Mode (WPA2/WPA ), WPA2Personal (WPA2 ), WPA Personal (WPA ), WPA2/WPA Enterprise MixedMode (WPA2/WPA - ), WPA2 Enterprise (WPA2 ),WPA Enterprise (WPA ), WEP RADIUS. Wi-Fi (WPA)(WEP , . RADIUS .)

WPA2 -

WPA2/WPA WPA2: -

WPA:

WPA

WEP

, RADIUS , . "-" , WPA2

WPA , RADIUS .

WPA2 -

WPA2/WPA -

WPA2: -

WPA:

WPA

RADIUS

WPA2/WPA Mixed Mode (WPA2/WPA ), WPA2

Personal (WPA2 ), WPA Personal (WPA )

WPA2/WPA , WPA2/WPA .

WPA2 , WPA2 .

WPA , WPA .

Passphrase ( ) 8-63 . password.

, , Cisco Connect Router settings( ).

Linksys E-Series


59/671

9

y

WPA2/WPA Enterprise Mixed Mode (WPA2/WPA

- ), WPA2 Enterprise (WPA2 ), WPA

Enterprise (WPA ).

RADIUS . (

RADIUS , .)

WPA2/WPA - , WPA2/WPA .

WPA2 , WPA2 .

WPA , WPA

.

RADIUS Server (RADIUS ) IP RADIUS .

RADIUS Port (RADIUS ) RADIUS . 1812.

Shared Key ( ) , .

WEP

WEP , , WPA.

:

WEP ,

WEP, .

Encryption () WEP , 40/64-bit (10hex digits) (40/64- (10 )) 104/128-bit (26hex digits) (104/128- (26 )). 40/64-bit (10 hex digits) (40/64- (10 )).

Passphrase ( ) WEP . Generate().

Key 1-4 ( 1-4) , WEP ().

TX Key (TX ) TX (Transmit) , . 1.

Linksys E-Series


60/671

10

RADIUS

WEP RADIUS . ( RADIUS , .)

:

RADIUS , RADIUS, .

RADIUS Server (RADIUS ) IP RADIUS .

RADIUS Port (RADIUS ) RADIUS . 1812.

Shared Secret ( ) , .

Encryption () WEP , 40/64-bit (10hex digits) (40/64- (10 )) 104/128-bit (26hex digits) (104/128- (26 s )). 40/64-bit (10 hex digits) (40/64- (10 )).

Passphrase ( ) WEP . Generate() .

Key 1-4 ( 1-4) , WEP ().

TX Key (TX ) TX (Transmit) , . 1.

Disabled ()

, , . , ,

.

Linksys E-Series


61/671

11

. Cisco Connect - , , , , . Cisco Connect . Cisco Connect , .

, , linksys.com/support.

Cisco Connect

, Cisco Connect . Cisco Connect, .

Cisco Connect Windows:

1. , , CiscoConnect.

Cisco Connect.

Cisco Connect Mac OS X:

1. Finder .

2. Cisco Connect.

Cisco Connect.

Linksys E-Series


62/671

12

.

Cisco Connect ,

:

Reset() 10-15 , Setup() .

( . ), Setup() .

, , Setup () .

Get Windows XP Service Pack 3

( Windows XP Service Pack 3) Windows XP, Cisco Connect Service Pack 3, . Get Windows XP Service Pack 3 ( Windows XPService Pack 3), , .

- 3, Service Pack 3.

, Ethernet .

Service Pack 3:

1. Cisco Microsoft Update (update.microsoft.com/windowsupdate).

2. Microsoft, .

3. Service Pack 3,

Setup () .

Linksys E-Series
http://http//update.microsoft.com/windowsupdatehttp://http//update.microsoft.com/windowsupdate


63/671

13

Your Internet cable is not plugged

in ( ) Your Internet cable is not plugged in ( ), ,

.

:

1. , Ethernet ( ), Internet . Ethernet, Internet WAN.

DSL

2. , . , , ON .

3. , CABLE , .

, DSL, , DSL DSL .

4. USB , USB .

5. Cisco Connect Next(), . , Setup () .

Linksys E-Series


64/671

14

Cannot access your router

( ) , , .

, . , , .

Windows:

1. Windows .

2. . .

3. , Connect( ). - , JimsRouter. LinksysE-Series, BronzeEagle, .

4. , ( ) Network key( ) Confirmnetwork key ( ), Connect ( ).

.

Linksys E-Series


65/671

15

Mac:

1. AirPort. . Cisco Connect .

- ,

JimsRouter. Linksys E-Series, BronzeEagle, .

2. LinksysE-Series (BronzeEagle ).

3. ( ) Password(), OK.

Device not found (

) Device not found ( ) ( iPhone, iPod

), .

- . - .

:

1. Cisco Connect.

Linksys E-Series


66/671

16

2. Computers and devices ( ). Computers and other devices ( ).

3. Other Wireless devices( ).

4. Wi-Fi , . .

WPA/WPA2.

5. ( ).

6. Cisco Connect Next().

: Wi-Fi . , , Cisco Connect , BronzeEagle.

Android iPhone

7. ( ), Cisco Connect. B6eM9UkCjz.

. , .

8. , Cisco Connect,

Finish().

Linksys E1200


67/671

17

Linksys E1200 Linksys E1200 Wireless-N

E1200

802.11n, 802.11g, 802.11b,802.3u

, Ethernet (1-4)

Reset (), Wi-Fi Protected Setup

/Wi-Fi Protected Setup,, Ethernet (1-4)

CAT 5e

802.11n (20 MHz):15,0 1,5 dBm @ CH6, MCS 0~4, MCS 8~1213,5 1,5 dBm @ CH6, MCS 5~7, MCS 13~15


802.11g:14,5 1,5 dBm @ CH6,

802.11b:16,5 1,5 dBm @ CH6,

2,5 dBi, 4,0 dBi (2 )

UPnP

Wi-Fi Protected Access 2 (WPA2),WEP, MAC

- 128-

188,7 151,7 31,2 (7,43 5,97 1,23)

252,7 (8,91 .)

12 V, 0,5 A

FCC, UL/cUL, ICES-003, RSS210,CE, Wi-Fi (IEEE 802.11b/g/n),WPA2, WMM, Wi-Fi ProtectedSetup, Windows 7

0 40C ( 32 104F)

-20 60C ( -4 140F)

10 80%

5 90%

, , , Linksys.com/support.

.

* 802.11 IEEE.

, - , , . , , , , , , , .

Linksys E1500


68/671

18

Linksys E1500 Linksys E1500

Wireless-N SpeedBoost

E1500

802.11n, 802.11g, 802.11b,802.3u

, Ethernet (1-4)

, Wi-Fi Protected Setup

/Wi-Fi Protected Setup,, Ethernet (1-4)

CAT 5e



802.11g:18,0 1.5 dBm @ CH6, 6 Mbps17,0 1.5 dBm @ CH6, 54 Mbps

802.11b:18,0 1,5 dBm @ CH6,

3,0 dBi, 4,0 dBi, 4,5 dBi(3 )

UPnP

Wi-Fi Protected Access 2 (WPA2),WEP, MAC

- 128-

188,7 151,7 31,2 (7,43 5,97 1,23)

254,1 (8,96 )

12 V, 0,5 A

FCC, UL/cUL, ICES-003, RSS210,CE, Wi-Fi (IEEE 802.11b/g/n),WPA2, WMM, Wi-Fi ProtectedSetup, Windows 7

0 40C ( 32 104F)

-20 60C ( -4 140F)

10 80%

5 90%


.

* 802.11 IEEE. , - , , . , , , ,

, , , .

Linksys E2500


69/671

19


N

E2500

802.11n, 802.11a, 802.11g, 802.11b, 802.3,802.3u, 802.3ab

4 , 2 2,4 GHz 5 GHz

(/)

802.11b: CCK, QPSK, BPSK802.11g: OFDM802.11a: OFDM802.11n: BPSK, QPSK, 16-QAM,64-QAM

2.4 GHz() 802.11b: -87 dBm @ 11 Mbps

802.11g: -70 dBm @ 54 Mbps802.11n 20 MHz: -70 dBm @ MCS15802.11n 40 MHz: -66 dBm @ MCS15

5 GHz802.11a: -70 dBm @ 54 Mbps802.11n 20 MHz: -66 dBm @ MCS23802.11n 40 MHz: -62 dBm @ MCS23

dBi 2,4 GHz: 1 ( ): 2,94 DBI 2 ( ): 3,78 dBi

5 GHz 1 ( ): 5.86 dBi 2 ( ): 4,88 dBi

UPnP

WEP, WPA, WPA2

- 128-

225 x 35 x 180 (8,86 x 1,38 x 7,09)

452 (15,94 )

12 V, 1 A

FCC, IC, CE, Wi-Fi A/B/G/N

0 40C ( 32 104F)

-20 60C ( -4 140F)

10 80% ,

5 90%

, , ,

Linksys.com/support. .

* 802.11 IEEE. , - , , . , , , , , , ,

.

Linksys E3200


70/671

20


N

E3200

802.11n, 802.11a, 802.11g, 802.11b, 802.3,802.3u, 802.3ab

6 , 3 2,4 GHz 5 GHz

(/)

10/100/1000 Mbps

, Ethernet (1-4),


, Ethernet (1-4)

802.11b: CCK, QPSK, BPSK802.11g: OFDM802.11a: OFDM802.11n: BPSK, QPSK, 16-QAM, 64-QAM

2.4 GHz802.11b: -87 dBm @ 11 Mbps ()802.11g: -77 dBm @ 54 Mbps ()802.11n (20 MHz): -71 dBm @ MCS15 ()802.11n (40 MHz): -68 dBm @ MCS15 ()

5 GHz802.11a: -75 dBm @ 54 Mbps ()

802.11n 20 MHz: -70 dBm @ MCS15 ()802.11n 40 MHz: -67 dBm @ MCS15 ()

2.4 GHz ( ) 1 3 dBi 2 4 dBi 3 4 dBi

5 GHz ( ) 1 4,5 dBi 2 4,5 dBi 3 4,5 dBi

UPnP

WEP, WPA, WPA2

- 128-

FAT NTFS HFS+

170 x 25 x 190 (6,69 x 0,98 x 7,48)

216 (7,62 ))

12 V, 2A

FCC, IC, CE, Wi-Fi A/B/G/N

0 40C ( 32 104F)

-20 60C ( -4 140F)

10 80% ,

5 90%


.

* 802.11 IEEE. , - , , . , , , , , , , .

Linksys E4200


71/671

21


Wireless-N

E4200 802.11n, 802.11a, 802.11g, 802.11b, 802.3,

802.3u, 802.3ab

2,4 5 GHz

10/100/1000 Mbps (Gigabit Ethernet)

, USB, , Ethernet (1-4)


: : , Ethernet (1-4)

6 , 3

2,4 GHz 5 GHz (/)

802.11b: CCK, QPSK, BPSK802.11g: OFDM802.11a: OFDM802.11n: BPSK, QPSK, 16-QAM, 64-QAM

2.4 GHz802.11b: -87 dBm @ 11 Mbps ()802.11g: -77 dBm @ 54 Mbps ()802.11n 20 MHz: 20 MHz: -71 dBm@ MCS15 ()

802.11n: 40 MHz: -68 dBm @ MCS15 () 5 GHz

802.11a: -71 dBm @ 54 Mbps ()802.11n: 20 MHz: -70 dBm @ MCS23 ()802.11n: 40 MHz: -68 dBm @ MCS23 ()

dBi 2,4 GHz (3 PIFA)PIFA 1 3.6 dBi ()PIFA 2 3.8 dBi ()PIFA 3 3.8 dBi ()5 GHz (3 PIFA)PIFA 1 4.8 dBi ()PIFA 2 5.3 dBi ()PIFA 3 5.2 dBi ()

FAT32, NTFS HSF+

UPnP

WEP, WPA, WPA2

- 128-

225 x 25 x 160 (8,86 x 0,98 x 6,30)

355 (12,52 )

12 V, 2A

FCC, IC, CE, Wi-Fi a/b/g/n,Windows 7

0 40C ( 32 104F)

-20 60C ( -4 140F)

10 80% ,

5 90%


.

* 802.11 IEEE. , - , , . , , , , , , , .


72/671

3425-TBD

Cisco, Cisco Linksys Cisco / .

Cisco www.cisco.com/go/trademarks. , , .

2011 Cisco / . .

linksys.com/support ,


73/671

E-Series

SumrioLinksys E-Series


74/671

ii

Viso geral do produtoE1200/E1500/E2500/E3200 . . . . . . . . . . . . . . . . . . . . . . . .1Vista traseira 1

Vista inferior 1

E4200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Vista superior 2

Vista traseira 2

Como configurar o roteador E-SeriesOnde encontrar mais ajuda . . . . . . . . . . . . . . . . . . . . . . . .3

Como configurar o roteador . . . . . . . . . . . . . . . . . . . . . . .3Como iniciar o Cisco Connect 3

Use o Cisco Connect para gerenciar o roteador 3

Como configurar manualmente o roteador . . . . . . . . . . . . . .3

Configurao avanadaComo abrir o utilitrio baseado em navegador. . . . . . . . . . . .4

Setup (Configurao) > Basic Setup (Configurao bsica) . . . .5Language (Idioma) 5

Internet Setup (Configurao da Internet) 5

Wireless (Sem fio) > Basic Wireless Settings(Configuraes sem fio bsicas) . . . . . . . . . . . . . . . . . . . . .6

Configuraes sem fio 6

Segurana sem fioWireless (Sem fio) > Wireless Security (Segurana sem fio) . . . .8Opes pessoais 8

Opes para empresas 8

Configuraes opcionais 8

Soluo de problemasComo executar o Cisco Connect aps a configurao . . . . . . 11

O roteador no foi configurado com xito. . . . . . . . . . . . . .12

MensagemGet Windows Service Pack 3(Obtenha o Windows Service Pack 3) . . . . . . . . . . . . . . . . . . . 12

Mensagem Your Internet cable is not plugged in(O cabo de Internet no est conectado) . . . . . . . . . . . . . . . . . 13

MensagemCannot access your router(No possvel acessar o roteador) . . . . . . . . . . . . . . . . . . . 14

Mensagem Device not found (Dispositivo no localizado) . . . . 15

EspecificaesLinksys E1200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 7

Linksys E1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8

Linksys E2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 9

Linksys E3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 0

Linksys E4200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1

Sumrio
http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-http://-/?-


75/671

Viso geral do produtoLinksys E-Series


76/671

2

E4200

Vista superior

Luz indicadora

Luz indicadora permanece acesa enquanto a energia estiverconectada e aps a conexo bem-sucedida do Wi-Fi Protected Setup.Pisca devagar durante a inicializao, durante as atualizaes do firmwaree durante a conexo Wi-Fi Protected Setup. Pisca rapidamente quandoh um erro no Wi-Fi Protected Setup.

Vista traseira

Portas Ethernet

Boto de configurao Wi-Fi Protected

Porta de Internet Porta de energia

Boto Reset

Porta USB

Portas Ethernet conecte os cabos Ethernet (conhecidos tambmcomo cabos de rede) a essas portas Gigabit (10/100/1000), identificadaspela cor azul, e a outros dispositivos de rede Ethernet da sua rede.

Porta de Internet conecte um cabo Ethernet (conhecido tambmcomo cabo de rede ou cabo de Internet) a essa porta, identificada pelacor amarela, e ao modem.

Boto Wi-Fi Protected Setup pressione esse boto para configurarfacilmente a segurana da conexo sem fio dos dispositivos de rede comWi-Fi Protected Setup. Para obter mais informaes, consulteSeguranasem fio na pgina 8.

Porta USB para compartilhar facilmente o armazenamento em discocom outros usurios da sua rede ou pela Internet, conecte uma unidadeUSB a essa porta. .

Boto Reset mantenha esse boto pressionado por 5-10 segundos

(at as luzes da porta piscarem ao mesmo tempo) para redefinir oroteador com os padres de fbrica. Voc tambm pode restaurar ospadres usando o utilitrio baseado em navegador.

Energia conecte o adaptador de energia CA que acompanha oproduto a essa porta.

CUIDADOUtilize apenas o adaptador que acompanha o roteador.

Boto liga/desliga pressione o lado | (on) para ligar o roteador.

Como configurar o roteador E-SeriesLinksys E-Series


77/671

33

Onde encontrar mais ajudaAlm deste Guia do Usurio, voc pode encontrar ajuda nestes locais: Linksys.com/support (documentao, downloads, Perguntas frequentes,

suporte tcnico, Bate-papo ao vivo, fruns)

CD de configurao (Guia para a soluo de problemas, avisos legais eregulatrios)

Ajuda do Cisco Connect (execute o Cisco Connect e clique em LearnMore [Saiba mais], se disponvel.)

Ajuda contextual do utilitrio para navegador (abra o utilitrio e cliqueem Help(Ajuda) na coluna direita.)

Como configurar o roteadorA maneira mais fcil e rpida de configurar o roteador executar o software deconfigurao Cisco Connect.

Como iniciar o Cisco Connect

Quando voc executar o CD de configurao, o Cisco Connect (o software deconfigurao do roteador) ser instalado automaticamente no seu computador.

possvel usar o Cisco Connect para gerenciar facilmente o roteador.

OBSERVAO:Se voc perdeu o CD de configurao, pode baixar o software emLinksys.com/support.

Para iniciar o Cisco Connect pela primeira vez:

1. Insira o CD na unidade de CD ou DVD.

2. Clique em Set up your Linksys Router(Configurar o roteador Linksys).

Se voc no vir essa opo:

No Windows, clique em Iniciar, Computador, clique duas vezes naunidade de CDe no cone Configurao.

No Mac, clique duas vezes no cone CDna rea de trabalho e cliqueduas vezes no cone em Configurao.

3. Siga as instrues exibidas na tela para concluir a configurao doroteador.

Use o Cisco Connect para gerenciar o roteador

Depois que o roteador estiver configurado e o Cisco Connect instalado, vocpode usar o Cisco Connect para gerenciar facilmente as configuraes doroteador, por exemplo:

Conectar dispositivos sua rede

Testar a velocidade da sua conexo Internet

Configurar controles de contedo inapropriado

Configurar acesso de convidado

Alterar o nome e a senha do roteador

Como configurar manualmente o roteadorDepois de configurar o roteador usando o software de configurao (localizadono CD), ele estar pronto para ser usado. Para fazer alteraes nas configuraesavanadas, ou se o software no funcionar, use o utilitrio baseado emnavegador do roteador. possvel acess-lo usando o navegador de umcomputador que est conectado ao roteador. Para obter mais informaessobre como usar o utilitrio, consulte Como abrir o utilitrio baseado em

navegador na pgina 4.

Como configurar o roteador E-Series

Configurao avanadaLinksys E-Series


78/671

44

Como abrir o utilitrio baseado em

navegadorPara acessar algumas configuraes avanadas, necessrio abrir o utilitriobaseado em navegador.

Para abrir o utilitrio baseado em navegador:

1. Execute o Cisco Connect, clique em Change (Alterar) em Routersettings (Configuraes do roteador), clique em Advanced settings(Configuraes avanadas) e em OK.

ou

Abra um navegador da Web em um computador conectado rede eacesse 192.168.1.1.

O roteador solicita nome de usurio e senha.

2. Digite o nome de usurio e a senha e clique em OK. O menu principal do

utilitrio ser aberto.

DICASSe voc configurar o roteador sem usar o Cisco Connect, a senhapadro do roteador ser admin. (O nome de usurio pode ficar embranco.)

Se voc usou o Cisco Connect para configurar o roteador, paraconsultar o nome de usurio e a senha, execute o Cisco Connect eclique em Router settings(Configuraes do roteador).

Configurao avanada



79/671

5

Setup (Configurao) > Basic Setup

(Configurao bsica)A primeira tela exibida a guia Basic Setup(Configurao bsica). Ela permiteque voc altere as configuraes gerais do roteador.

Language (Idioma)

Select your language (Selecione o idioma) Para usar um idioma diferente,selecione-o no menu suspenso. O idioma do utilitrio para navegador ser

alterado cinco segundos aps a seleo de outro idioma.

Internet Setup (Configurao da Internet)

A seo Internet Setup (Configurao de Internet) configura o roteador para asua conexo com a Internet. A maior parte dessas informaes pode ser obtidacom o seu ISP (Provedor de servios de Internet).

Internet Connection Type (Tipo de conexo com a Internet)

Selecione no menu suspenso o tipo de conexo da Internet fornecida pelo seuprovedor. Os tipos disponveis so:

Automatic Configuration - DHCP (Configurao automtica - DHCP)

Static IP (IP esttico)

PPPoE

PPTP

L2TP

Telstra Cable (Cabo Telstra)

Automatic Configuration - DHCP (Configurao automtica -DHCP)

O campo Internet Connection Type (Tipo de conexo com a Internet) est

definido como Automatic Configuration - DHCP(Configurao automtica -DHCP ou Dynamic Host Configuration Protocol). Mantenha o padro apenas seo seu provedor suportar DHCP ou se voc se conectar usando um endereo IPdinmico. (Essa opo geralmente se aplica s conexes a cabo).



80/671

6

Static IP (IP esttico)

Se voc tiver de usar um endereo IP fixo para se conectar Internet, selecioneStatic IP(IP esttico).

PPPoE

Se voc usa uma linha DSL, verifique com o provedor se ele usa Point-to-PointProtocol over Ethernet (PPPoE). Se sim, selecione PPPoE.

PPTP

O PPTP (Point-to-Point Tunneling Protocol), geralmente, um servio utilizadosomente em conexes na Europa. Se a sua conexo PPTP aceita DHCP ou umendereo IP dinmico, selecione Obtain an IP Address Automatically(Obterum endereo IP automaticamente). Se for necessrio usar um endereo IP fixopara se conectar com a Internet, selecione Specify an IP Address(Especificarum endereo IP) e configure as opes abaixo.

L2TPO Layer 2 Tunneling Protocol (L2TP), geralmente, um servio utilizadosomente em conexes em Israel.

Telstra Cable (Cabo Telstra)

O Cabo Telstra, geralmente, um servio utilizado somente em conexes naAustrlia.

Connect on Demand (Conexo sob demanda) ou Keep Alive(Continuar conectado)

As opes Connect on Demand (Conexo sob demanda) e Keep Alive(Continuar conectado) permitem escolher se o roteador deve se conectar coma Internet somente quando necessrio (til se o provedor cobra por tempo deconexo) ou se deve permanecer conectado o tempo todo. Selecione a opoapropriada.

Wireless (Sem fio) > Basic Wireless

Settings (Configuraes sem fio bsicas)As configuraes bsicas da rede sem fio so definidas nesta tela.

OBSERVAODepois de configurada a rede sem fio, configure os parmetros desegurana da conexo sem fio.

Configuraes sem fio

Network Mode (Modo de rede) Selecione os padres sem fio que a rede aceita.

Mixed (Misto) Se houver dispositivos Wireless-N (2,4 GHz), Wireless-G eWireless-B na rede, mantenha o padro, Mixed(Misto).

Wireless-B/G Only (Apenas Wireless-B/G) Se houver dispositivosWireless-B e Wireless-G (2,4 GHz) na rede, selecione Wireless-B/G Only(Apenas Wireless-B/G).

Wireless-B Only (Apenas Wireless-B) Se s houver dispositivos Wireless-B,selecione Wireless-B Only(Apenas Wireless-B).

Wireless-G Only (Apenas Wireless-G) Se s houver dispositivos Wireless-G,selecione Wireless-G Only(Apenas Wireless-G).

Wireless-N Only (Apenas Wireless-N) Se s houver dispositivos Wireless-N(2,4 GHz), selecione Wireless-N Only(Apenas Wireless-N).

Disabled (Desabilitado) Se no houver dispositivos Wireless-B, Wireless-Ge Wireless-N (2,4 GHz) na rede, selecione Disabled(Desabilitado).



81/671

7

OBSERVAOSe voc possui um roteador de banda dupla, pode selecionar Mixed(Misto), Wireless-A Only (Apenas Wireless-A), Wireless-N Only (ApenasWireless-N) ou Disabled (Desabilitado) para a faixa de 5 GHz.

Se voc no souber ao certo o que selecionar, mantenha o valorpadro, Mixed(Misto).

Network Name (SSID) (Nome da rede (SSID)) O SSID (Service Set Identifier) o nome da rede compartilhada por todos os dispositivos de uma rede sem fio.Ele diferencia maisculas de minsculas e no deve ter mais de 32 caracteres.O padro Ciscoseguido pelos cinco ltimos dgitos do nmero de srie doroteador, encontrado na parte inferior do roteador. Se voc usou o software deconfigurao para fazer a instalao, o nome da rede padro foi alterado paraum nome fcil de lembrar.

OBSERVAO

Se voc restaurar as configuraes padro de fbrica do roteador(pressionando o boto Reset (Redefinir) ou usando a telaAdministration> Factory Defaults[Administrao > Padres defbrica]), o nome da rede voltar a ser o valor padro. Volte o nomeda rede para o nome original ou ser necessrio reconectar todosos dispositivos da sua rede sem fio ao novo nome de rede.

Channel Width (Largura de banda do canal) Para obter um melhordesempenho na rede usando dispositivos Wireless-B, Wireless-G e Wireless-N(2,4 GHz), selecione Auto (20 MHz or 40 MHz) (Automtico [20 MHz ou 40MHz]). Para uma largura de banda do canal de 20 MHz, mantenha o padro,20 MHz only(somente 20 MHz).

Channel (Canal) Selecione o canal na lista suspensa para rede Wireless-B,Wireless-G e Wireless-N (2,4 GHz). Se no tiver certeza de qual canal deve serselecionado, mantenha o padro, Auto(Autom

Linksys E3200 User Guide

Documents

Transcript of Linksys E3200 User Guide