LINCOLN ELECTRIC CHINA LOW ALLOY GMAW WIRE … · values at -40℃.Designed to be used in...
Transcript of LINCOLN ELECTRIC CHINA LOW ALLOY GMAW WIRE … · values at -40℃.Designed to be used in...
Merit™ JM-80
Merit™ JM-90 (JM-80D2)
Merit™ JM-100
Merit™ JM-110
Merit™ JM-120
Merit™ JM-130
GB/T 8110 ER55-GAWS A5.28 ER80S-G
AWS A5.28 ER80S-D2, ER90S-D2ER80S-G, ER90S-G
AWS A5.28 ER100S-G
AWS A5.28 ER110S-G
AWS A5.28 ER120S-G
EN ISO16834 G89 4 M Mn4Ni2.5CrMo
Use with 5-25% CO2/ Ar mixed shielding gas. For welding of 550 MPa tensile grade high strength low alloy steel. Widely used for steel structure, heavy fabrication and pressure vessel applications.
Use with 5-25% CO2/ Ar mixed shielding gas. For welding of 550 - 620 MPa tensile grade high strength low alloy steel. Good impact values at -30℃. Widely used for heavy fabrication, pressure vessel and power generation applications.
Use with 5-25% CO2/ Ar mixed shielding gas. Capable of producing weld metal with 690MPa tensile strength. Widely used in special vehicles manufacturing, heavy fabrication, and offshore applications.
Use with 5-25% CO2/ Ar mixed shielding gas. Capable of producing welds with 760 MPa tensile strength & high impact values at -40℃.Designed to be used in applications such as crane manufacturing & offshore.
Use with 5-25% CO2/ Ar mixed shielding gas. Capable of producing welds with 830 MPa tensile strength. It’s suitable for applications such as crane manufacturing & offshore.
Recommend to use with 5%CO2/Ar mixed shielding gas. Capable of producing welds with 890 MPa yield strength. Designed to be used in crane manufacturing & offshore applications.
CC9.017.EN 11/12
LINCOLN ELECTRIC CHINA LOW ALLOY GMAW WIRE
PRODUCT FEATURES
·Excellent weldability - Stable arc, low spatter, low clean up, suitable for both short-circuit transfer and high current spray transfer.
·Superb feedability - Unique manufacturing technology results in a clean wire surface, smooth copper coating layer and an even amount of feeding lubricant. These advantages ensure lower friction during wire feeding and better electrical conductivity.
WIRE CONFORMANCE PRODUCT DESCRIPTION
High Strength Low Alloy Family
CC9.017.EN
CHEMICAL COMPOSITION OF SOLID WIRE(Wt-%)
LINCOLN ELECTRIC CHINA LOW ALLOY GMAW WIRE
High Strength Low Alloy Family
%C %S%Mn %Cr%Ni %Mo%P%Si
Merit™ JM-80
Merit™ JM-90(JM-80D2)
Merit™ JM-100
Merit™ JM-110
Merit™ JM-120
Merit™ JM-130
---
0.071
0.07-0.12
0.10
---
0.072
---
0.10
---
0.086
0.13
0.12
---
1.51
1.6-2.1
1.72
---
1.62
---
0.67
---
1.67
1.6-2.1
1.81
---
0.61
0.5-0.8
0.60
---
0.65
---
0.61
---
1.60
0.50-0.80
0.73
---
0.018
0.025 max.
0.010
---
0.013
---
0.017
---
0.018
0.015
0.014
---
0.019
0.025 max.
0.019
---
0.004
---
0.009
---
0.010
0.018
0.005
---
0.010
0.15 max.
0.005
---
0.87
---
1.62
---
1.63
2.3-2.8
2.69
---
0.28
---
0.079
---
0.036
---
0.60
---
0.58
0.2-0.6
0.42
---
---
0.4-0.6
0.43
---
0.43
---
0.29
---
0.37
0.30-0.65
0.33
1G 2G 2F 3G 3G 4G 5G
APPROVALS·ISO 9001 Quality Management System
APPLICATIONS·Petro Chemical Equipment
·Pressure Vessel
·Power Generation Construction
·Heavy Fabrication
DIAMETERS AVAILABLE·0.8mm ·1.0mm ·1.2mm
·1.4mm ·1.6mm
WELDING POSITIONS
STANDARD PACKAGING·Plastic Spool Packages: 15KG, 20KG
·Drum Packages: 150KG, 200KG, 250KG, 300KG, 350KG * Please contact your local Lincoln Electric sales office for
alternative types of packaging.
AWSrequirements
Typical value
AWSrequirements
Typical value
AWSrequirements
Typical valueAWS
requirementsTypical value
AWSrequirements
Typical value
EN 16834requirements
Typical value
Products
LINCOLN ELECTRIC CHINA LOW ALLOY GMAW WIRE
High Strength Low Alloy Family
1.0mm75%Ar/25%CO2
Short circuit transfer
1.0mm90%Ar/10%CO2Spray transfer
1.2mm75%Ar/25%CO2
Short circuit transfer
1.2mm95%Ar/5%CO2Spray transfer
1.4mm95%Ar/2%CO2Spray transfer
9-12
9-12
12-19
12-19
12-25
2.5
3.8
6.4
9.5
12.7
15.2
3.2
3.8
5.1
8.9
12.1
12.7
5.3
6.0
7.4
18
19
22
23
29
30
19
20
21
27
30
30
25
27
28
80
120
175
195
230
275
145
165
200
285
335
340
325
350
430
0.7
1.1
1.8
2.7
3.6
4.4
1.5
1.8
2.4
4.2
5.7
6.0
4.8
5.4
6.7
RECOMMENDED WELDING PARAMETERS (Current polarity: DCEP)Diameter, Shielding gas
Transfer ModeWire Feed Speedm/min (Inch/min)
Voltage(volts)
Approx. Current(amps)
CTWD(mm)
Melt-off Rate(Kg/hr)
CC9.017.EN
MECHANICAL PROPERTIES OF ALL-WELD-METAL
---
500
---
560
---
645
---
785
---
835
890 min.
955
550 min.
600
620 min.
650
690 min.
725
760 min.
840
830 min.
875
940-1180
985
---
25
---
24
---
23
15 min.
20
---
18
15
16
---
81
---
96
---
115
---
82
---
70
47
49
---
-30
---
-30
---
-20
---
-40
---
-40
-40
-40
CVN Impact value
Merit™ JM-80As-welded80%Ar+20%CO2
Merit™ JM-90(JM-80D2)As-welded80%Ar+20%CO2
Merit™ JM-100As-welded80%Ar+20%CO2
Merit™ JM-110As-welded80%Ar+20%CO2
Merit™ JM-120As-welded80%Ar+20%CO2
Merit™ JM-130As-welded95%Ar+5%CO2
J ℃
AWSrequirements
Typical valueAWS
requirementsTypical valueAWS
requirementsTypical valueAWS
requirementsTypical valueAWS
requirementsTypical value
EN 16834requirements
Typical value
Products Tensile Strength(MPa)
Yield Strength(MPa)
Elongation(%)
CC9.017.EN 11/12
Customer Assistance PolicyThe business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customers particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has not been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to change - This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com.cn for any updated information.
Authorized Distributor:
No.116 Jie Fang West Road, Tai He District, Jinzhou Liaoning Province 121016, ChinaTEL:86-416-7179 785 FAX:86-416-7179 811 www.lincolnelectric.com.cn
Lincoln Electric (Jinzhou) Welding Materials Co., Ltd.
LINCOLN ELECTRIC CHINA LOW ALLOY GMAW WIRE
High Strength Low Alloy Family
Plastic Spool: 15KG, 20KG
15KG/20KG
A
B
F C
D
E
STANDARD PACKAGING
Standard Weight
“A”Outer
Diameter(mm)
“B”Wound Reel Outer Width
(mm)
“C”Arbor
Diameter (mm)
“D”Pin Hole
Distance from Axis (mm)
“E” Pin Hole Diameter
(mm)
“F”Inner
Diameter(mm)
297±2 103±2 5±1 45±1 12±1 204±1
100KG
150KG/200KG/250KG/300KG
350KG
Standard Weight
“A”(mm)
“B”(mm)
“C”(mm)
“D” (mm)
300±5 500±5 450±5 500±5
300±5 500±5 750±5 780±5
435±5 663±5 685±5 735±5
Drum: 100kg, 150KG, 200KG, 250KG, 300KG, 350KG