Lighting Outdoor RTS - Somfy · PDF file 1. Brief overview of the Lighting Outdoor RTS The...

Click here to load reader

  • date post

    11-Jun-2020
  • Category

    Documents

  • view

    5
  • download

    0

Embed Size (px)

Transcript of Lighting Outdoor RTS - Somfy · PDF file 1. Brief overview of the Lighting Outdoor RTS The...

  • R ef

    . 5 05

    44 78

    A

    Lighting Outdoor RTS

    Operating and installation guide

    www.somfy.fr

  • 1. Brief overview of the Lighting Outdoor RTS 3 2. Safety - Important information 4

    2.1 Installation and commissioning 4 2.2 Operating 4 2.3 Environment 4

    3. Content of the kit and tools required 5 3.1 List of parts 5 3.2 Tools required 5

    4. The Lighting Outdoor RTS in detail 5 4.1 Components 5 4.2 Technical data 6

    5. Mounting the Lighting Outdoor RTS 6 5.1 Before mounting the Lighting Outdoor RTS 6 5.2 Wiring and mounting 7

    6. Programming the control point 9 6.1 Accessing the Lighting Outdoor RTS PROG button 9 6.2 Identifying the control point 9 6.3 One-touch point 10 6.4 Point with Up/STOP/Down buttons 13 6.5 Timer 15 6.6 Situo control point 17 6.7 Telis 1 RTS remote controls 18 6.8 Telis 4 RTS/Telis 4 Soliris RTS remote controls 20 6.9 Keytis 2 RTS remote control 21 6.10 Keytis 4 RTS remote control 23

    7. Replacing a lost or broken control point 24 8. Everyday use of the Lighting Outdoor RTS 25

    8.1 Operating 25 8.2 Maintenance 26

    9. Problems with the Lighting Outdoor RTS? 26

    Contents

    2 Copyright © 2008 Somfy SAS. All rights reserved.

    Lighting Outdoor RTS

  • Somfy’s expertise delivers satisfaction guaranteed. Thank you for choosing a Somfy Lighting Outdoor RTS. Before installing and using the Lighting Outdoor RTS, please read this guide carefully. Somfy solutions animate your windows and entrances to bring your whole house alive. Somfy solutions are designed so that everyone can enjoy the benefits of the products in their home, based on their specific requirements. In this guide, the term ‘product’ can include your awning, blind, curtain, roller shutter. Well thought-out and easy to use, Somfy solutions are one of life’s little daily pleasures, making home life more enjoyable.

    1. Brief overview of the Lighting Outdoor RTS The Lighting Outdoor RTS is used to control one or more incandes- cent or halogen bulbs from a single control point equipped with Radio Technology Somfy (RTS). The Lighting Outdoor RTS is waterproof and can therefore be installed outdoors. It can be used, for example, to control lights on awnings, lights on the terrace, in the garden, in front of the garage or in front of the gate. The Lighting Outdoor RTS cannot be used to control neon lighting, a 24 V bulb supplied by a transformer, or a bulb with a dimmer switch. The maximum power of all the bulbs connected to a Lighting Outdoor RTS is 500 W. The Lighting Outdoor RTS is used as:

    an individual control, with one Lighting Outdoor RTS controlling one • bulb;

    a group control - several Lighting Outdoor RTS are controlled from a • single control point (advanced installation function), or;

    a multiple control - one Lighting Outdoor RTS is controlled by seve-• ral control points (up to a maximum of 12) (advanced installation function).

    3Copyright © 2008 Somfy SAS. All rights reserved.

    Lighting Outdoor RTS

    3

  • 4 Copyright © 2008 Somfy SAS. All rights reserved.

    Lighting Outdoor RTS

    2. Safety - Important information 2.1 Installation and commissioning Read this guide carefully before installing and using the Lighting Outdoor RTS. This guide describes the installation, commissioning and use of the Lighting Outdoor RTS. Before beginning installation, make sure that the Lighting Outdoor RTS is compatible with the associated equipment and accessories. Any incorrect use will invalidate the warranty and Somfy's liability.

    2.2 Operating Always make sure the power supply to the Lighting Outdoor RTS is off before beginning any installation, mounting, disassembly or maintenance operations on the Lighting Outdoor RTS and associated bulbs.

    Do not allow children to play with the fixed control points. Keep remote - controls out of the reach of children. Never immerse or soak the Lighting Outdoor RTS in any liquid. - Only use maintenance products recommended by Somfy. -

    2.3 Environment Damaged electrical or electronic products, such as used batteries, should not be disposed of with household waste. Please take them to a collec- tion point or an approved centre to ensure they are recycled correctly.

  • 5Copyright © 2008 Somfy SAS. All rights reserved.

    Lighting Outdoor RTS

    3. Content of the kit and tools required

    3.1 List of parts Before beginning installation and - commissioning of the Lighting Outdoor RTS, check that all parts listed in the following table are present in the correct quantity (Q):

    No. Components Q. 1 Cover 1 2 Lighting Outdoor RTS 1 3 Screw 2 4 Plugs 2

    Note: If the screws provided are lost, do not use roundhead screws. Only use flathead screws with a diameter of 3 mm.

    3.2 Tools required Appropriate screwdriver for the • screws to be used Insulated flathead electrician's • screwdriver Drill and drill bit• Pencil•

    4. The Lighting Outdoor RTS in detail

    4.1 Components A. PROG button B. Manual On/Off control button C. Indicator light D. Electrical connection terminal E. Rubber grommets

    OK P OR G

    tSsS

    P OR G

    tSsS

    P OR G

    tSsS

    1

    OK P OR G

    tSsS

    P OR G

    tSsS

    P OR G

    tSsS

    2

    OK P OR G

    tSsS

    P OR G

    tSsS

    P OR G

    tSsS

    3 4

    OK P OR G

    tSsS

    P OR G

    tSsS

    P OR G

    tSsS

    GORP

    PROG

    N L N L

    tSsS

    PROG

    N L N L

    GORP

    tSsS

    x

    x <

    PROG

    tSsS

    N L

    tSsS

    C

    GORP

    PROG

    N L N L

    tSsS

    PROG

    N L N L

    GORP

    tSsS

    x

    x <

    PROG

    tSsS

    N L

    tSsS

    A

    B

    D E

  • 6 Copyright © 2008 Somfy SAS. All rights reserved.

    Lighting Outdoor RTS

    5.1.2 Conditions Note: Do not mount the Lighting Outdoor RTS on a metal surface.

    The - Lighting Outdoor RTS is designed to be installed outdoors. Install the Lighting Outdoor RTS with - the cable input downwards to prevent water ingress. Always leave the front panel of the - Lighting Outdoor RTS clearly accessi- ble; never place anything in front. Check the radio range after mounting - the Lighting Outdoor RTS. The radio range is limited by the radio appliance control standards.

    4.2 Technical data Dimensions in mm (H x w x d): 110 x 110 x 40 mm Operating temperature: - 20°C to + 60°C Protection rating: Outdoor use - IP 55 Frequency: 433.42 MHz Range: 20 m through two concrete walls; 200 m in open space Class: II Power supply: 230 V; 50 Hz Power: 500 W max.

    5. Mounting the Lighting Outdoor RTS 5.1 Before mounting the Lighting Outdoor RTS 5.1.1 Distances

    150 cm = Minimu - m distance to be kept between a Lighting Outdoor RTS and the ground.

    30 cm = Minimum distance to be kept between a Lighting Outdoor RTS - and the roof.

    30 cm = Minimum distance to be kept between a Lighting Outdoor RTS - and another RTS component

    20 cm = Minimum distance to be kept between two Lighting Outdoor - RTS.

  • 7Copyright © 2008 Somfy SAS. All rights reserved.

    Lighting Outdoor RTS

    5.2 Wiring and mounting 5.2.1 Preparation of the Lighting

    Outdoor RTS Check that the lights to which the - Lighting Outdoor RTS will be connec- ted work correctly. Cut off the mains power supply. - Remove the cover (1) from the Lighting - Outdoor RTS:

    Gently remove the cover using a - flat, pointed tool (such as a flathead screwdriver) on each of the corners, around the notches. Lever it and lift the cover upwards, - without using force, to detach the mounting lugs from the cover.

    Drill two sealant pads (E) using a thin, - pointed tool such as a screwdriver. This tool must have a diameter which is less than that of the cable.

    Caution! Never remove the sealant pads.

    5.2.2 Wiring Pass the cables through the sealant - pads. Connect the supply cables to the - Lighting Outdoor RTS using the connec- tor box (D) (terminal) according to the diagram opposite:

    (a) / (b) = Output• (L) = Live• (N) = Neutral•

    Note on the wiring for the Lighting Outdoor RTS:

    To connect the wires to the terminal: - Press firmly on the plastic tab above - the terminal using a pointed tool:

    The socket is opened. ►

    1 2

    E

  • 8 Copyright © 2008 Somfy SAS. All rights reserved.

    Lighting Outdoor RTS

    Insert the wire into the socket. - Release the tab. -

    The socket closes again. ► The wire is connected. ►

    Ensure that no pressure is exerted on - the wires from the Lighting Outdoor RTS terminal (D).

    5.2.3 Mounting Drill two holes in the wall, 95 mm apart - and horizontally aligned. Insert the plugs (4) provided. - Mount the Lighting Outdoor RTS (2) to the - wall using the screws (3) provided, posi- tioning the sealant pads (E) downwards.

    Note: If the screws provided are lost, do not use roundhead screws. Only use flathead screws with a diameter of 3 mm.

    Restore the electric power supply. - Check the wiring on the Lighting - Outdoor RTS:

    Press the Lighting Outdoor RTS - manual control button (B).

    If the bulb connected to the ► Lighting Outdoor RTS does not light up, see section 9 "Problems with the Lighting Outdoor RTS?". If the bulb connected to the Lighting ► Outdoor RTS lig