LIGHT YOUR WAY - cdn-docs.av-iq.com
56
Harris OPTO+ ™ Fiber Optic Solutions Guide LIGHT YOUR WAY
Transcript of LIGHT YOUR WAY - cdn-docs.av-iq.com
Harris OPTO+™ Fiber Optic Solutions Guide
LIGHT YOUR WAY
2 Fiber optic solutionsWith today’s broadcast and communications workflow often extending across multiple locations and high-bandwidth signal transport requirements becoming the norm, fiber optic systems are increasingly relied upon as a more efficient way to manage signal transport. Harris® OPTO+™ fiber optic solutions address the transport of broadcast-quality audio and video signals, as well as a complete set of other signal types — including GPI/O, Serial, Ethernet and RF. The complete portfolio of OPTO+ modules uses time domain and course/dense wave division multiplexing to increase distance and density of transport over fiber optics. Flexible, cost-effective solutions are available for a range of applications, including post production, in satellite and cable facilities, telecommunications, government, municipal and outside/truck-based broadcasting. OPTO+ fiber optic modules — available for Harris DAs, routers and frame synchronizers — offer an efficient, reliable and affordable means of transport for video, audio, data, SD, HD and 3 Gb/s signals across any workflow.
Light Your Way With Harris® OPTO+™ Fiber Optic Solutions
To learn more, visit www.broadcast.harris.com/opto+
Q-SEE™ — MPEG-4 Streaming
OpticalNetwork
X85™
Platinum™
OpticalTest and Measurement
IP
6800+™ — Modular Platform
Mux
6800+™ — MPEG-4 Streaming
Demux
Receiver
Receiver
Transmitter
Transmitter
6800+™ — Modular Platform
Fibe
r op
tic
solu
tion
s
3
inde
xindexproduct description page
3 gb/s over opticsOP+EOT Single-Channel 3G/HD/SD/ASI with Fiber Transmitter 6
OP+OER+S Single-Channel 3G/HD/SD/ASI with Fiber Receiver 7
OP+OER+SF+D Single-Channel 3G/HD/SD/ASI with Fiber Receiver and Transmitter 8
OP+DWDM8 40-Channel Passive DWDM Optical Multiplexer/Demultiplexer 9
OP+DWDM40 40-Channel Passive DWDM Optical Multiplexer/Demultiplexer, Standalone 1RU 10
OP+TDMT+8 8-Channel 1.5 Gb/s HD-SDI (or 4-Channel 3 Gb/s HD-SDI) Input, TDM Fiber Transmitter 11
OP+TDMR+8 8-Channel 1.5 Gb/s HD-SDI (or 4-Channel 3 Gb/s HD-SDI) Output, TDM Fiber Receiver 12
audio and Video over opticsOP+AES Fiber Optic AES Transceiver 13
OP+AVT Analog Video/Audio Fiber Transmitter 14
OP+AVR Analog Video/Audio Fiber Receiver 15
OP+DAS Composite Analog A/V Decoder/Synchronizer/Optical Transmitter 16
OP+HBD HD/SD/ASI, AES, RS-232/RS-422/RS-485, GPIO, Intercom Transmitter 17
OP+OHB HD/SD/ASI, AES, RS-232/RS-422/RS-485, GPIO, Intercom Receiver 18
OP+HMT Single-Channel HD/SD TDM Fiber Transmitter 19
OP+HDR Single-Channel HD/SD TDM Fiber Receiver 20
OP+HMX Auto-Sensing 3G/HD/SD Multiplexer with 8 AES Inputs and Optical Transmitter 21
OP+HDX Auto-Sensing 3G/HD/SD Demultiplexer with 8 AES Outputs and Optical Receiver 22
4
audio and Video over opticsOP+SFS 3G/HD/SD-Capable A/V Frame Synchronizer with Optical Transmitter or Receiver 23
OP+SMT Single-Channel SD TDM Fiber Transmitter 24
OP+SDR Single-Channel SD TDM Fiber Receiver 25
XOS+OP+ 3G/HD-SDI/SDI/DVB-ASI Fiber Transmitter 26
OXS+OP+ 3G/HD-SDI/SDI/DVB-ASI Fiber Receiver 27
XOS+2+OP+ Dual-Channel 3G/HD-SDI/SDI/DVB-ASI Fiber Transmitter 28
OXS+2+OP+ Dual-Channel 3G/HD-SDI/SDI/DVB-ASI Fiber Receiver 29
distribution over opticsDA-DHREO6803+D/DX Dual 1x4 or Single 1x8 ACO, E-to-O, 3G/HD/SD/ASI, Reclocking 30
DA-DHROE6803+D Dual 1x4 or Single 1x8 ACO, O-to-E, 3G/HD/SD/ASI, Reclocking 31
DA-DHROOE6803+D Dual-Channel 1x4 or Single-Channel 1x8 with Built-In ACO, Optical Distribution, O-to-E, 3G/HD/SD/ASI, Reclocking 32
DA-HRO6803+D/DX 1x8, 3G/HD/SD/ASI with Reclocking, Fiber and Coaxial Inputs and Outputs 33
data over opticsOP+DAT Serial Data, GPI Transceiver 34
OP+ETH 10/100/1000 Base-T Ethernet Switch Transceiver 35
rF over opticsOP+LBT L-Band Satellite Optical Transmitter 36
OP+LBR L-Band Satellite Optical Receiver 37
indexin
dex
5
course Wave division Multiplexing (cWdM)HOMS+OP+CXXD, OHDS+OP+CXXD Active Multiplexer/Demultiplexer 38
OMS6800+CXXD, ODS6800+CXXD Passive CWDM Single-Mode Optical Multiplexer/Demultiplexer 39
optical splitters/combiners OBDS6800+CD Passive Full-Spectrum Optical Splitter and Combiner 40
OPSS+OP+D Optical Protection Switch 41
OBS+OP+5050D Optical Power Splitter (50% Split) 42
optical test and Measurement OFI-20 Optical Fiber Identifier 43
OLT-20A Optical Loss Tester 44
OPM-15 Optical Power Meter 45
OTM-20 Optical Test Meter 46
PALMOTDR-S20 Optical Time Domain Reflectometer 47
SLS Stabilized Laser Source 48
VLS-20A Visible Laser Source 49
synchronizers/converters X85™ Multiple-Application Video and Audio Platform 50
X50™ Frame Synchronizer/Converter 51
routers Platinum™ Innovative Large-Scale Routing 52
indexin
dex
63
gb/s
oVe
r op
tics
op+eot Single-Channel 3G/HD/SD/ASI with Fiber Transmitter
OP+EOT modules are available in configurations that support single wave-length single mode fiber, multimode fiber, and 16-channel coarse wavelength division multiplexing (CWDM). This group of modules is geared towards distrib-uting broadcast signals electrically and optically. They are available with a single fiber output (OP+EOT), dual fiber outputs (OP+EOT+2), and four fiber outputs (OP+EOT+4). The base model firmware supports 270 Mb/s transmission. 1.5 Gb/s and 3 Gb/s capabilities are enabled by optional software keys.
All of the OP+EOT modules operate at the following data rates:
•270Mb/sinSD-SDIandDVB-ASI•1483.5,1485,2967,2970Mb/sinHD-SDI•Anyratefrom50Mb/supto3Gb/swithoutreclocking
(requires OP+EOT+SD3G and OP+EOT+HD3G upgrades)
FEATURESn 3 Gb/s HD-SDI capability n AutomaticcableequalizationonBNCinputsn Laser safety shutdown protection against overpowering n Comprehensive operating controls, including automatic/manual
reclocking and rate selection, laser enable, and laser disable n Comprehensive status reporting via CCS-compliant software and control
panels, including module ID, loss of input, signal lock status, input data rate, and laser enabled/disabled status
n CWDMcompliancewithITU-TG.694.2standardsforCWDM wavelengths
n Available SC/PC, ST/PC, and FC/PC connectors (the SC/PC connector is supplied standard)
n Multiple fiber output availability n Hot-swappable installation and removal
OPTICALOUT
SDI IN
SDI OUT
SDI OUT
7
3 gb
/s o
Ver
opti
csop+oer+s Single-Channel 3G/HD/SD/ASI with Fiber Receiver
OP+OER modules are 3 Gb/s HD-SDI optical-to-electrical receivers. This group of modules is geared towards distributing broadcast signals electrically and optically. They are available in single- and double-slot versions (the double-slot version adds a passive splitter and additional reclocked outputs), and in stan-dard-sensitivityPINandhigh-sensitivityAPDversions.Thebasemodelfirmwaresupports 270 Mb/s transmission. 1.5 Gb/s and 3 Gb/s capabilities are enabled by optional software keys.
FEATURESn 3 Gb/s HD-SDI capability n Comprehensive operating controls, including automatic/manual reclock-
ing and rate selection, laser enable, and laser disable n Comprehensive status reporting via CCS-compliant software and control
panels, including module ID, loss of input, signal lock status, input data rate, and input optical power
n Available SC/PC, ST/PC, and FC/PC connectors (the SC/PC connector is supplied standard)
n Hot-swappable installation and removal n 1260 nm to 1620 nm capability
OPTICALIN
-9 d
Bm
Max
(A
PD
)
SDI OUT
SDI OUT
SDI OUT
83
gb/s
oVe
r op
tics
op+oer+sF+d Single-Channel 3G/HD/SD/ASI with Fiber Receiver and Transmitter
OP+OER modules are 3 Gb/s HD-SDI optical-to-electrical receivers. This group of modules is geared towards distributing broadcast signals electrically and optically. They are available in single- and double-slot versions (the double-slot version adds a passive splitter and additional reclocked outputs), and in stan-dard-sensitivityPINandhigh-sensitivityAPDversions.Thebasemodelfirmwaresupports 270 Mb/s transmission. 1.5 Gb/s and 3 Gb/s capabilities are enabled by optional software keys.
FEATURESn 3 Gb/s HD-SDI capability n Comprehensive operating controls, including automatic/manual reclock-
ing and rate selection, laser enable, and laser disable n Comprehensive status reporting via CCS-compliant software and control
panels, including module ID, loss of input, signal lock status, input data rate, and input optical power
n Available SC/PC, ST/PC, and FC/PC connectors (the SC/PC connector is supplied standard)
n Hot-swappable installation and removal n 1260 nm to 1620 nm capability
SDI OUT
SDI OUT
SDI OUT
OPTICAL OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUTSDI OUT
OPTICAL IN
9
3 gb
/s o
Ver
opti
csop+dWdM8 8-Channel Passive DWDM Optical Multiplexer/Demultiplexer
TheOP+DWDM8fiberopticmoduleisaneight-channelmodularproductca-pable of Dense Wavelength Division Multiplexing (DWDM) and demultiplex-ing.Withitsdensesignaltofiberratio,theOP+DWDM8isidealforlong-haultransport of fiber optic signals. Use it to multiplex and transport a large number of signals of various formats — all over a single fiber.
FEATURESn Bidirectionalcapabilityn Multiplexer and de-multiplexer capability in one module n Express port for expansion n CompliancewithITU-TG.694.1standardsforDWDMwavelengths
OP+DWDM8+1D
COMCH31 1552.52 nmCH33 1550.92 nmCH35 1549.32 nmCH37 1547.72 nm
EXPCH32 1551.72 nmCH34 1550.12 nmCH36 1548.51 nmCH38 1546.92 nm
OP+DWDM8+2D
COMCH53 1535.04 nmCH55 1533.47 nmCH57 1531.90 nmCH59 1530.33 nm
EXPCH54 1534.25 nmCH56 1532.68 nmCH58 1531.12 nmCH60 1529.55 nm
103
gb/s
oVe
r op
tics
op+dWdM40 40-Channel Passive DWDM Optical Multiplexer/Demultiplexer, Standalone 1RU
The OP+DWDM40 fiber optic module is a 40-channel standalone product in a compact 1RU frame capable of Dense Wavelength Division Multiplex-ing (DWDM) and demultiplexing. With its dense signal to fiber ratio, the OP+DWDM40 is ideal for long-haul transport of fiber optic signals. Use it to multiplex and transport a large number of signals of various formats — all over a single fiber.
FEATURESn 40-channel passive multiplexer and de-multiplexer capability in a 1 RU
frame n CompliancewithITU-TG.694.1standardsforDWDMn Multiplexer and de-multiplexer capability in one frame n Bidirectionalcapability
COMMON
CH21
CH22
CH23
CH24
CH25
CH26
CH27
CH28
CH29
CH30
11
3 gb
/s o
Ver
opti
csop+tdMt+8 8-Channel 1.5 Gb/s HD-SDI (or 4-channel 3 Gb/s HD-SDI) Input, TDM Fiber Transmitter
TheOP+TDMT/R+8productsarecapableof transportingupto four3Gb/s,eight HD-SDI or eight SD/ASI signals, or any combination equal to 12 Gb/s of transport signals, over a single optical fiber. These award-winning modules providethehighest-densitysignaltransportoverfiberinthemarket.Builttoresideinthe6800+™modularcoreprocessingplatform,theOP+TDMT/R+8products transport up to eight streams of 1.5 Gb/s HD-SDI signals by using thetimedivisionmultiplexing(TDM)approach.TheOP+TDMT/R+8productsare ideal for applications handling a high volume of signals for medium- and long-haul transport.
FEATURESn 12 Gb/s payload and 12.44 Gb/s transmission data rate n Transport for up to eight unidirectional HD-SDI video channels n Transparent end-to-end transmission, with unmodified pass-through of
vertical and horizontal ancillary data n Handlingofindependent3Gb/sHD-SDI,SD-SDI,SDTI,andDVB/ASI
signals, as well as general-purpose 1.5 Gb/s and 3 Gb/s data n Independent channels (connection or disconnection of any channel has
no impact on other channels) n Automatic disabling of output port at receiver upon loss of signal at
transmitter input
n Input signal format detection n Input video CRC status detection at transmitter and receiver n Fullhot-swappingcapabilityina6800+framen Thumbnail streaming for monitoring video signals n Automatic equalization, re-clocking and rate reporting n Link status reporting laser status and receiver power monitoring n Dedicated input monitoring port on transmitters n Configurable output/monitoring port on receivers
CH 1
CH 2
CH 3
CH 4
CH 8
CH 7
WAVELENGTH
Tx/Rx
MONITOR OUT(TDMTONLY)
OP+TDMT+8__OP+TDMR+8__
CH 5
123
gb/s
oVe
r op
tics
op+tdMr+8 8-Channel 1.5 Gb/s HD-SDI (or 4-channel 3 Gb/s HD-SDI) Input, TDM Fiber Receiver
TheOP+TDMT/R+8productsarecapableof transportingupto four3Gb/s,eight HD-SDI or eight SD/ASI signals, or any combination equal to 12 Gb/s of transport signals, over a single optical fiber. These award-winning modules providethehighest-densitysignaltransportoverfiberinthemarket.Builttoresideinthe6800+™modularcoreprocessingplatform,theOP+TDMT/R+8products transport up to eight streams of 1.5 Gb/s HD-SDI signals by using thetimedivisionmultiplexing(TDM)approach.TheOP+TDMT/R+8productsare ideal for applications handling a high volume of signals for medium- and long-haul transport.
FEATURESn 12 Gb/s payload and 12.44 Gb/s transmission data rate n Transport for up to eight unidirectional HD-SDI video channels n Transparent end-to-end transmission, with unmodified pass-through of
vertical and horizontal ancillary data n Handlingofindependent3Gb/sHD-SDI,SD-SDI,SDTIandDVB/ASI
signals, as well as general-purpose 1.5 Gb/s and 3 Gb/s data n Independent channels (connection or disconnection of any channel has
no impact on other channels) n Automatic disabling of output port at receiver upon loss of signal at
transmitter input n Input signal format detection
n Input video CRC status detection at transmitter and receiver n Fullhot-swappingcapabilityina6800+framen Thumbnail streaming for monitoring video signals n Automatic equalization, re-clocking and rate reporting n Link status reporting laser status and receiver power monitoring n Dedicated input monitoring port on transmitters n Configurable output/monitoring port on receivers
CH 1
CH 2
CH 3
CH 4
CH 8
CH 7
WAVELENGTH
Tx/Rx
MONITOR OUT(TDMTONLY)
OP+TDMT+8__OP+TDMR+8__
CH 5
13
Vide
o an
d au
dio
oVer
opt
ics
op+aes Fiber Optic AES Transceiver
The OP+AES fiber optic modules offer an excellent solution for the easy and re-liable transport of multiple AES audio channels over fiber, making them ideal for applicationsinoutsidebroadcast(OB)vans,stadiums/arenasandeventfacili-ties. Equipped with user-selectable receive or transmit capability, these modules are available in configurations of eight or 16 AES channels and are capable of operating in bidirectional mode. The OP+AES modules also can be used in a “daisy-chain”orcascadingapplicationtocarry128AESaudiochannelsonasingle wavelength — an ideal fiber optic solution for even the most demanding long haul AES transport.
FEATURESn Up to 16 AES channels input/output per module in bidirectional mode,
andupto128AESunidirectionalchannelsperwavelengthinDaisyChain (cascade) mode
n Support for balanced or unbalanced AES input and output (balanced AES requires an external balun adapter)
n Sampleratesfrom30to96kHzn Optical power monitoring and alarm thresholdsn Full CCS control and monitoringn Front and back hot-swappable capabilityn 8-oroptional16-channelAEScapabilityn User-selectable receive or transmit capabilityn Channel-by-channel selectable balanced/
unbalanced capabilityn Manual gain and mute support for audio
output channelsn Front/back headphone jacks for content
monitoring at card edge and at back module
EXPANSION IN
Rx0 dBm Max (PIN)
-7 dBm Max (APD)
Rx
Tx
EXPANSION OUT
HEADPHONE
__PIN__APD__8CH__16CH
BREA
KOU
T
14Vi
deo
and
audi
o oV
er o
ptic
sop+aVt Analog Video/Audio Fiber Transmitter
TheOP+AVTmodulesprovideprofessionalbroadcastqualitytransportofmul-tiple analog audio and video signals over a single fiber optic interface. These modules are capable of transporting up to eight analog video channels and 64 analog audio channels over this fiber interface, using an innovative daisy-chain design to maximize the fiber optic bandwidth. Occupying two slots within the 6800+™frame,thissolutionallowsforupto20independentanalogvideosignalsand80analogaudiochannelsinasingle2RUframe.
Since the analog video is not decoded, phase information is kept intact, allow-ing applications such as blackburst transport over long distances for genlock purposes.
TheOP+AVTmodulessupportuptoonevideoandfouraudiochannels,whiletheOP+AVT+2modulessupportuptotwovideoandeightaudiochannels.Aswell,anelectricalonlyexpansionversionof theOP+AVT+2(OP+AVT+EXP)can be used along with an initial optical version to create a daisy-chained con-figuration, capable of supporting up to eight video and 64 audio channels on a single optical channel.
Fiber optic transmitters are available in both 1310 nm (FP laser) CWDM and DWDM (DFB laser) wavelengths, allowing for in-building, campus or metrodistance applications.
This module can be controlled manually via card-edge controls or remotely us-ingeitherCCSNavigator™,third-partySNMP-basedcontrolapplications,HTTPwebbrowser(withQXFE-seriesframesonly)orNUCLEUS™ control panels.
FEATURESn One fiber output — either single- or multi-moden Availablein1310nmFPandCWDMDFBwavelengthoptionsn Uptotwocompositevideoinputs(NTSC,PAL-B,PAL-M)n Up to eight balanced analog audio inputs (high impedance or 600 ohms)n Hot-swappablen Occupiestwoslotsinthe2RUFR6802+QXF6800+frameorthestand-
aloneFR6800+MB6800+mixboxn HTTPcontrolviaEthernet-equipped6800+
2RU framesn Standard SC/PC-type fiber optic connectorn Optional FC/PC-type or ST/PC-type fiber optic
connector
EXP OUT
EXP IN
VID A LOOP
1A1B
2A2B
3A3B
4A4B
AUD
IO IN
TX VID B IN
VID BLOOP
VID A IN
OP+
AVT
15
Vide
o an
d au
dio
oVer
opt
ics
op+aVr Analog Video/Audio Fiber Receiver
TheOP+AVRmodulesprovideprofessionalbroadcastqualitytransportofmul-tiple analog audio and video signals over a single fiber optic interface. These modules are capable of transporting up to eight analog video channels and 64 analog audio channels over this fiber interface, using an innovative daisy-chain design to maximize the fiber optic bandwidth. Occupying two slots within the 6800+™frame,thissolutionallowsforupto20independentanalogvideosignalsand80analogaudiochannelsinasingle2RUframe.
Since the analog video is not decoded, phase information is kept intact, allow-ing applications such as blackburst transport over long distances for genlock purposes.
TheOP+AVRmodulessupportuptoonevideoandfouraudiochannels,whiletheOP+AVR+2modulessupportuptotwovideoandeightaudiochannels.Aswell,anelectricalonlyexpansionversionoftheOP+AVR+2(OP+AVR+EXP)can be used along with an initial optical version to create a daisy-chained con-figuration, capable of supporting up to eight video and 64 audio channels on a single optical channel.
FiberopticreceiversareavailableinbothPIN(standard)andAPD(highsensitiv-ity) options, allowing for in-building, campus or metro distance applications.
This module can be controlled manually via card-edge controls or remotely us-ingeitherCCSNavigator™,third-partySNMP-basedcontrolapplications,HTTPwebbrowser(withQXFE-seriesframesonly)orNUCLEUS™ control panels.
FEATURESn One fiber input — either single- or multi-moden Accepts any wavelength in 1260 - 1620 nm range for single or CWDM
applicationsn AvailablewithPINorhigh-sensitivityAPDreceiveroptionsn Uptotwocompositevideooutputs(NTSC,PAL-B,PAL-M)n Up to eight balanced analog audio outputsn Electrical-only expansion module allows for daisy-chaining of up to eight
receiver modulesn Hot-swappablen Occupiestwoslotsinthe2RUFR6802+QXF
6800+frameorthestandaloneFR6800+MB6800+mixbox
n HTTPcontrolviaEthernet-equipped6800+2RU frames
n Standard SC/PC-type fiber optic connectorn Optional FC/PC-type or ST/PC-type fiber optic
connector
EXP OUT
EXP IN
NOT USED
NOT USED
1A1B
2A2B
3A3B
4A4B
Rx VID B OUT
VID A OUT
OP+
AVR
16Vi
deo
and
audi
o oV
er o
ptic
sop+das Composite Analog A/V Decoder/Synchronizer/Multiplexer/Optical Transmitter
The OP+DAS provides video and audio conversion from analog to digital, synchronizes the audio to the video, embeds the synchronized audio (four channels) into the SD-SDI video stream and transmits the resulting signal over a fiber optic interface. Integrated processing amps provide for full pro-cessing of both video and audio signals. This module is the optical version oftheDAS6801+.
This module can be controlled manually via card-edge controls or remotely usingeitherCCSNavigator™, third-partySNMP-basedcontrolapplications,HTTP web browser (with QXFE-series frames only), or NUCLEUS™ control panels. The module is Q-SEE-compliant, allowing for direct thumbnail moni-toringwheninstalledinanEthernet-equipped6800+™ frame.
FEATURESn 2D video decoder as standard feature, upgradeable to 3D decoding
(available as a software license-key option) n 12-bit, 4x oversampling of input video n Videoframesynchronizationn User-adjustable input video processing for black level, gain, hue and
saturation n Time-base correction n Integrated audio processing
(gain, invert, mute, channel swap, channel sum) n Accepts composite analog video or SD-SDI inputs, with user-selectable
input priority (can be used for simple failover protection of input signal)
n Relay bypass on SDI input for protection against loss of module power n Up to four SDI component digital video outputs n Four analog audio inputs n Two discrete AES audio connections (balanced or unbalanced), indepen-
dently user-configurable as either inputs or outputs n Audio embedding of four channels
(two analog pairs, two AES pairs, or one pair of each) n Integrated video and audio test signal generators n One fiber optic output — either single-mode
or multi-moden Availablein1310nmFPandCWDMDFB
wavelength optionsn Standard SC/PC-type fiber optic connector n Optional FC/PC-type or ST/PC-type fiber optic
connector n Q-SEE™-compliant
ANAL
OG
AU
DIO
IN &
BAL
DAR
S, A
ES 1
, AES
2
DARS/SDI IN CPST IN
TX SDI OUT 1
SDI OUT 2/DATA I/O
SDI OUT 3/AES I/O 1
SDI OUT 4/AES I/O 2
17
Vide
o an
d au
dio
oVer
opt
ics
op+Hbd HD/SD/ASI, AES, RS-232/RS-422/RS-485, GPIO, Intercom Transmitter
The OP+HBD fiber module aggregates different types of signals into andfrom the fiber domain utilizing a single module. Each card is capable of inte-grating audio, video and data applications, and supports intercom, RS-232/RS-422/RS-485andGPIO’sbi-directionaldataflow,aswellasunidirectionaltransport of HD/SD/SDI video and balanced/unbalanced audio signals.
TheOP+HBDmodulesenablebroadcastersandproductionfacilitiestomi-grate all the signal types needed in a studio application onto fiber utilizing one OPTO+™ module. This highly dense solution provides significant space and cost savings, while maximizing quality and reliability through simplifying the fiber handling requirements.
These products are ideal for any application requiring the transfer of audio, video and data information over fiber.
FEATURESn OneunidirectionalSDIchannel—HD-SDI,SD-SDI,SDTIorDVB/ASI
signaln Four unidirectional AES channels, user-selectable balanced or unbalancedn TwobidirectionalRS-232/RS-422/RS-485dataportsn Four GPI interface channels, user-selectable directionn Configurable, two-wire and four-wire bidirectional intercom channel —
compatible with RTS®, Telex® and Clear-Com® matricesn Single fiber output: either single-mode or multimode, available in 1310
nmFP,CWDMandDMWMDFBwavelengthoptions
n Single fiber input: either single-mode or multimoden AvailablewithPINorhigh-sensitivityAPDreceiveroptionsn Standard SC/PC-type fiber optic connector, optional FC/PC-type or ST/
PC-type fiber optic connectorn Hot-swappablen Complete module status monitoring via card-edge LEDsn Occupiestwoslotsinthe2RUFR6802+QXF6800+™ frame or the
standaloneFR6800+MB6800+MixBoxn OptionalCCSNavigator™ applications for remote Ethernet PC-based
status monitoring and controlRx
SDI/TDM In
TDM/SDI Out
AUX I/O
-5dBm Max. (APD)
Tx
18Vi
deo
and
audi
o oV
er o
ptic
sop+oHb HD/SD/ASI, AES, RS-232/RS-422/RS-485, GPIO, Intercom Receiver
The OP+OHB fiber module aggregates different types of signals into andfrom the fiber domain utilizing a single module. Each card is capable of inte-grating audio, video and data applications, and supports intercom, RS-232/RS-422/RS-485andGPIO’sbidirectionaldataflow,aswellasunidirectionaltransport of HD/SD/SDI video and balanced/unbalanced audio signals.
TheOP+OHBmodulesenablebroadcastersandproductionfacilitiestomi-grate all the signal types needed in a studio application onto fiber utilizing one OPTO+™ module. This highly dense solution provides significant space and cost savings, while maximizing quality and reliability through simplifying the fiber handling requirements.
These products are ideal for any applications requiring the transfer of audio, video and data information over fiber.
FEATURESn OneunidirectionalSDIchannel—HD-SDI,SD-SDI,SDIorDVB/ASIsignaln Four unidirectional AES channels, user-selectable balanced or unbalancedn TwobidirectionalRS-232/RS-422/RS-485dataportsn Four GPI interface channels, user-selectable directionn Configurable, two-wire and four-wire bidirectional intercom channel —
compatible with RTS®, Telex® and Clear-Com® matricesn Single fiber output — either single-mode or multi-mode, available in
1310nmFPandCWDMDFBwavelengthoptionsn Single fiber input — either single-mode or multi-mode
n Acceptsanywavelengthin1260-1620nmrange,availablewithPINorhigh-sensitivity APD receiver options
n Standard SC/PC-type fiber optic connector, optional FC/PC-type or ST/PC-type fiber optic connector
n Hot-swappablen Complete module status monitoring via card-edge LEDsn Occupiestwoslotsinthe2RUFR6802+QXF6800+frameorthe
standaloneFR6800+MB6800+mixboxn OptionalCCSNavigator™ applications for remote Ethernet PC-based
status monitoring and controlRx
SDI/TDM In
TDM/SDI Out
AUX I/O
-5dBm Max. (APD)
Tx
19
Vide
o an
d au
dio
oVer
opt
ics
op+HMt Single-Channel HD/SD TDM Fiber Transmitter
The OP+HMT/OP+HDR modules provide high-density transport of digital video signals over fiber using time division multiplexing (TDM) technology. These modules are capable of transporting up to two HD-SDI or eight SD-SDI/DVB-ASIsignalsoverasingleopticalfiber.Occupyingtwoslotswithinthe6800+frame,thissolutionallowsforupto20 independentHD-SDIor80independentSD-SDI/DVB-ASIsignalsinasingle2RUframe.
A pair of OP+HMT/OP+HDR modules can transport:
* Two x HD-SDI*EightxSD-SDI/DVB-ASI * One x HD-SDI plus four x SD-SDI
Fiber optic transmitters are available in both 1310 nm FP and 16 CWDM (Coarse Wavelength Division Multiplexing) DFB wavelengths. Fiber opticreceiversareavailableinbothPIN(standard)andAPD(highsensitivity)op-tions.
FEATURESn One fiber output — either single-mode or multi-moden Availablein1310nmFPandCWDMDFBwavelengthoptionsn EightBNCinputswithautomaticcableequalizationandreclockingn Passing of unmodified vertical and horizontal ancillary datan Videothumbnailstreamingforconfidencemonitoringn Hot-swappablen Complete module status monitoring via card-edge LEDsn Standard SC/PC-type fiber optic connectorn Optional FC/PC-type or ST/PC-type fiber optic
connectorIN 6
TX 1
TX 2
_OP+
SMT+
_13
_C27
_C29
_C31
_C33
_C35
_C37
_C43
_C45
_C47
_C49
_C51
Not
e: C
onne
ctor
IN
5 to
IN 8
and
TX
2 ar
eN
OT
used
in th
is p
rodu
ct.
_C53
_C55
_C57
_C59
_C61
_OP+
SMT+
2_O
P+H
MT+
_OP+
HM
T+2
IN 7
IN 8
IN 1IN 2
IN 3
IN 4
IN 5
20Vi
deo
and
audi
o oV
er o
ptic
sop+Hdr Single-Channel HD/SD TDM Fiber Receiver
The OP+HMT/OP+HDR modules provide high-density transport of digital video signals over fiber using time division multiplexing (TDM) technology. These modules are capable of transporting up to two HD-SDI or eight SD-SDI/DVB-ASIsignalsoverasingleopticalfiber.Occupyingtwoslotswithinthe6800+frame,thissolutionallowsforupto20 independentHD-SDIor80independentSD-SDI/DVB-ASIsignalsinasingle2RUframe.
Fiber optic transmitters are available in both 1310 nm FP and 16 Coarse Wavelength Division Multiplexing (CWDM) DFB wavelengths. Fiber opticreceiversareavailableinbothPIN(standard)andAPD(high-sensitivity)op-tions.
FEATURESn One fiber input — either single-mode or multi-moden Accepts any wavelength in 1260-1620 nm rangen AvailablewithPINorhigh-sensitivityAPDreceiveroptionsn EightBNCoutputswithautomaticcableequalizationandreclockingn Passing of unmodified vertical and horizontal ancillary datan Videothumbnailstreamingforconfidencemonitoringn Hot-swappablen Complete module status monitoring via card-
edge LEDsn Occupiestwoslotsinthe2RUFR6802+QXF
6800+frameorthestandaloneFR6800+MB6800+mixbox
n Standard SC/PC-type fiber optic connectorn Optional FC/PC-type or ST/PC-type fiber optic
connector
OUT 8 OUT 5
OUT 7
RX 2 _PIN _APD-5dBm MAX (APD)
_OP+
SDR
+_O
P+SD
R+2
+
Note: C
onnectors OU
T 5 to OU
T 8 and RX 2 are N
OT used in this product.
_OP+
HD
R+
_OP+
HD
R+2
+
RX 1
OUT 6
OUT 4
OUT 3
OUT 2OUT 1
21
Vide
o an
d au
dio
oVer
opt
ics
op+HMx Auto-Sensing 3G/HD/SD Multiplexer with 8 AES Inputs and Optical Transmitter
TheOP+HMX6803+D3G/HD/SDembeddermoduleprovidesuptoeightAESinputs with a video processing amplifier. This module allows for control over the picture, has an embedded audio processor for hot-switching embedded audio, provides full audio delay and processing, and can embed metadata fromexternalsources.TheOP+HMX6803+Dcanbeusedinanybroadcastfacility where the embedding of AES on SD or HD signals is required or where the processing of SD or HD video and audio signals is essential.
TheOP+HMX+Dincludesthefibersub-module,whichwillallowtheadditionof an optical transmitter to complement the electrical inputs.
FEATURESn Operatesvideostandards:525and625(SMPTE259M);1080i/p;720p
(SMPTE274M/296M);3Gb/s(SMPTE424M)upgradeablen Auto-detect or user-forced input video standard n 10-bit video processing n Digitalequalization(supportsBelden8281/1694Aandnewer,thin
coaxial cables like Alcatel SD02) n PassesallHANCsamplesn PassesVANCwithuser-selectableoptionforVBI/ANCline-by-linevideo
deleting n Up to eight frames of HD and 50 frames of SD video delay n Videoprocessingamplifierwithcontrolsforluminancegain/offset,
chrominance gain/offset, black/white clip and hue adjustment
n Ability to embed AES on output (fiber or SDI) without video source or genlock
n Ability to embed external metadata n Dolby® header adjustment n Basicaudiolimitingcapabilityn ModulewilldirectlysupporteightAESunbalancedinputsonly;balanced
AES supported via external baluns adapters n Videoandaudiotestgeneratorn AES audio routing/advanced processing n Internal audio processing amplifier with gain,
swap, invert, delay, mix (sum) of de-embed-ded and external audio channels
n Bypassablesamplerateconversionforexter-nal and embedded audio
n Data mode for passing compressed audio — APTX,Dolby® E, AC-3
n 16-, 20- or 24-bit audio processing n C,UandVbittransparencyn Shadowed/restored parameter settings when
switching video standards
HM
X680
3+D SDI IN 1
SDI OUT 1
SDI OUT 2
SDI OUT 3BREAKO
UT
SDI OUT 4
TX
22Vi
deo
and
audi
o oV
er o
ptic
sop+Hdx Auto-Sensing 3G/HD/SD Demultiplexer with 8 AES Outputs and Optical Receiver
TheOP+HDX6803+D3G/HD/SDde-embeddermoduleforthe6800+frameprovides up to eight AES outputs and a video processing amplifier. It allows control over the video while functioning as a de-embedded audio processor for hot-switching de-embedded audio. This new module provides full audio delay, audio processing and the ability to de-embed metadata to external sources.TheOP+HDX6803+Disidealforanybroadcastoperationwherethede-embedding of audio from HD or SD video signals is required or where SD or HD video and (embedded and/or discrete) audio signals are processed.
TheOP+HDX+R+Dversionincludesthefibersub-module,whichwillallowthe addition of an optical receiver to complement the electrical inputs.
FEATURESn Operatesvideostandards:525and625(SMPTE259M);1080i/p;720p
(SMPTE274M/296M);3Gb/s(SMPTE424M)upgradeablen Auto-detect or user-forced input video standard n 10-bit video processing n Digitalequalization(supportsBelden8281/1694Aandnewer,thin
coaxial cables like Alcatel SD02) n PassesallHANCsamplesn PassesVANCwithuser-selectableoptionforVBI/ANCline-by-linevideo
deleting n Up to eight frames of HD and 50 frames of SD video delay n Videoprocessingamplifierwithcontrolsforluminancegain/offset,
chrominance gain/offset, black/white clip and hue adjustment
n Ability to de-embed metadata n Dolby® header adjustment n Seamless Sound™(onLOVaudiode-embeddingfromblackorgreycan
be obtained) n Supportforfiberreceiver(OP+HDX+Rversions)optionviasubmodule
on main module n Basicaudiolimitingcapabilityn Videoandaudiotestgeneratorn AES audio routing/advanced processing n Internal audio processing amplifier with gain,
swap, invert, delay, mix (sum) of de-embed-ded audio channels
n Bypassablesamplerateconversionforexter-nal and embedded audio
n Data mode for passing compressed audio — APTX,Dolby® E, AC-3
n 16-, 20- or 24-bit audio processing n C,UandVbittransparencyn Shadowed/restored parameter settings when
switching video standards
SDI IN 1
SDI OUT 1
SDI OUT 2
SDI OUT 3
SDI OUT 4
BREAKO
UT
Fiber
23
Vide
o an
d au
dio
oVer
opt
ics
op+sFs 3G/HD/SD-Capable A/V Frame Synchronizer with Optical Transmitter or Receiver
The OP+SFS6803+ 3G/HD/SD video frame synchronizer is an auto-timingserial digital frame synchronizer and audio synchronizer processing module forthe6800+frame.Themoduleprovidesvideoframesynchronizationanddelay for 3G/HD/SD signals and can be used in any broadcast, post-produc-tion, cable or mobile facility where processing and synchronization of SD or HD video and audio (embedded and/or discrete) signals are required. The OP+SFS6803+hasthecapabilitytoretimeanI/Osignaltoa localstationclock for the clean processing of all synchronized signals.
FEATURESn Operatesvideostandards:525and625(SMPTE259M);1080i/p;720p
(SMPTE274M/296M);3Gb/s(SMPTE424M)upgradeablen Auto-detect or user-forced input video standard n Digitalequalization(supportsBelden8281/1694Aandnewer,thin
coaxial cables like Alcatel SD02) n PassesallHANCsamplesn PassesVANCwithuser-selectableoptionforVBI/ANCline-by-linevideo
deleting n Cleanly handles hot-switch on input n Up to eight frames of HD and 50 frames of SD video delay n Videoprocessingamplifierwithcontrolsforluminancegain/offset,
chrominance gain/offset, black/white clip and hue adjustment n Ability to embed AES on output (fiber or SDI) without video source or
genlock
n Ability to de-embed metadata and embed external metadata n Dolby® header adjustment n Basicaudiolimitingcapabilityn Module will directly support eight AES unbalanced inputs and outputs
only — balanced AES supported via external balun adapters n Videoandaudiotestgeneratorn AES audio routing/advanced processing n Internal audio processing amplifier with gain, swap, invert, delay, mix
(sum) of de-embedded and external audio channels
n Includes bypass of sample rate conversion for external and embedded audio
n Data mode for passing compressed audio — APTX,Dolby® E, AC-3
n 16, 20 or 24-bit audio processing n Handling of embedded data and audio when
a hot-switch occurs (de-embed, re-sample, buffer, re-embed)
n Provides audio tracking and hot-switching information to other modules
SDI IN 1Rx/Tx
SDI OUT 1
SDI OUT 2
SDI OUT 3
SDI OUT 4
BREAKO
UT
24Vi
deo
and
audi
o oV
er o
ptic
sop+sMt Single-Channel SD TDM Fiber Transmitter
TheOP+SMT/OP+SDRmodulesprovidetransportofSD-SDI/DVB-ASIdigitalvideo signals over fiber using time division multiplexing (TDM) technology. ThesemodulesarecapableoftransportinguptofourSD-SDI/DVB-ASIsignalsoverasingleopticalfiber.Occupyingtwoslotswithinthe6800+frame,thissolutionallowsforupto40independentSD-SDI/DVB-ASIsignalsinasingle2RU frame. Fiber optic transmitters are available in both 1310 nm FP and 16CWDMDFBwavelengths.FiberopticreceiversareavailableinbothPIN(standard) and APD (high-sensitivity) options.
FEATURESn One fiber output — either single-mode or multi-moden Availablein1310nmFPandCWDMDFBwavelengthoptionsn FourBNCinputswithautomaticcableequalizationandreclockingn Passing of unmodified vertical and horizontal ancillary datan Videothumbnailstreamingforconfidencemonitoringn Hot-swappablen Complete module status monitoring via card-edge LEDsn Occupiestwoslotsinthe2RUFR6802+QXF
6800+frameorthestandaloneFR6800+MB6800+mixbox
n Standard SC/PC-type fiber optic connector IN 6
TX 1
TX 2
_OP+
SMT+
_13
_C27
_C29
_C31
_C33
_C35
_C37
_C43
_C45
_C47
_C49
_C51
Not
e: C
onne
ctor
IN
5 to
IN 8
and
TX
2 ar
eN
OT
used
in th
is p
rodu
ct.
_C53
_C55
_C57
_C59
_C61
_OP+
SMT+
2_O
P+H
MT+
_OP+
HM
T+2
IN 7
IN 8
IN 1IN 2
IN 3
IN 4
IN 5
25
Vide
o an
d au
dio
oVer
opt
ics
op+sdr Single-Channel SD TDM Fiber Receiver
TheOP+SMT/OP+SDRmodulesprovidetransportofSD-SDI/DVB-ASIdigitalvideo signals over fiber using time division multiplexing (TDM) technology. ThesemodulesarecapableoftransportinguptofourSD-SDI/DVB-ASIsignalsoverasingleopticalfiber.Occupyingtwoslotswithinthe6800+frame,thissolutionallowsforupto40independentSD-SDI/DVB-ASIsignalsinasingle2RU frame.
Apair ofOP+SMT/OP+SDRmodules can transport four SD-SDI/DVB-ASI.Fiberoptictransmittersareavailableinboth1310nmFPand16CWDMDFBwavelengths.Fiberopticreceiversareavailable inbothPIN(standard)andAPD (high-sensitivity) options.
FEATURESn One fiber input — either single-mode or multi-moden Accepts any wavelength in 1260 - 1620 nm rangen AvailablewithPINorhigh-sensitivityAPDreceiveroptionsn FourBNCoutputswithautomaticcableequalizationandreclockingn Passing of unmodified vertical and horizontal ancillary datan Videothumbnailstreamingforconfidencemonitoringn Hot-swappablen Complete module status monitoring via card-
edge LEDsn Occupiestwoslotsinthe2RUFR6802+QXF
6800+frameorthe standaloneFR6800+MB6800+mixbox
n Standard SC/PC-type fiber optic connector
OUT 8 OUT 5
OUT 7
RX 2 _PIN _APD-5dBm MAX (APD)
_OP+
SDR
+_O
P+SD
R+2
+
Note: C
onnectors OU
T 5 to OU
T 8 and RX 2 are N
OT used in this product.
_OP+
HD
R+
_OP+
HD
R+2
+
RX 1
OUT 6
OUT 4
OUT 3
OUT 2OUT 1
26Vi
deo
and
audi
o oV
er o
ptic
sxos+op+ 3G/HD-SDI/SDI/DVB-ASI Fiber Transmitter
TheXOS+OP+isanindustry-leading3Gb/s-capableelectrical-to-opticalcon-version module able to convert any incoming 3 Gb/s HD-SDI (SMPTE 424M), HD-SDI(SMPTE292M),SDI(SMPTE259M,SMPTE297M)orDVB-ASI(DVB-A010) electrical signal to an optical signal for transmission on single-mode or multi-mode fiber. This module comes standard with 270 Mb/s SD-SDI sup-port, and is upgradeable to 1.5 Gb/s HD-SDI and 3 Gb/s SDI support via optional software keys. Output optical option of 1310 nm FP laser, or CWDM DFBlasermakethesemodulessuitableforawidevarietyofapplications.
TheXOS+OP+moduleacceptsoneelectrical inputandprovidesonefiberoutput along with an equalized and re-clocked electrical output for monitor-inganddistributionpurposes.Thismoduleoccupiesasingleslotina6800+frame, allowing for the high density of up to 20 independent 3 Gb/s signals in a 2RU frame.
FEATURESn Software upgradeable support: SD to HD to 3 Gb/sn Supports single-mode or multi-mode fibern Availablein1310nmFPandDFBCWDMwavelengthoptions1
n User-selectable re-clocking modes to meet exact needsn Automaticdetection:270Mb/s,1.485Gb/sor2.97Gb/sn Manuallyset:270Mb/s,1.485Gb/sor2.97Gb/sn Automatically bypasses the re-clocker when the signal does not lockn Enforced bypass mode
n Complete module status monitoring via card-edge LEDsn Fully hot-swappablen Upto20modulesina2RU6800+frameoruptotwomodulesinthe
standalone6800+mixboxframen Standard SC/PC-type fiber optic connectorn Optional FC/PC-type or ST/PC-type fiber optic connector
1For any DWDM needs, please contact a Harris representative.
SDI 1
OPT
ICAL
2
XOS+
OP+
OPT
ICAL
1
SDI 2
27
Vide
o an
d au
dio
oVer
opt
ics
oxs+op+ 3G/HD-SDI/SDI/DVB-ASI Fiber Receiver
TheOXS+OP+isanindustry-leading3Gb/sfibermodulecapableofreceiv-ing optical inputs from single-mode or multi-mode fiber and converting them backto3Gb/sHD-SDI(SMPTE424M),HD-SDI(SMPTE292M),SDI(SMPTE259M,SMPTE297M)orDVB-ASI (DVB-A010)electrical signals.Thismod-ulecomes standard with 270 Mb/s SD-SDI support and is upgradeable to 1.5 Gb/s HD-SDI and 3 Gb/s HD-SDI support via optional software keys, eliminat-ing equipment replacement costs when upgrading to these standards.
TheOXS+OP+acceptsoneopticalinputandprovidestwoidenticalre-clocked 3G/HD/SDBNCoutputs.ThismoduleisavailablewithstandardPINopticalreceivers or a high-sensitivity APD optical receiver. Occupying a single slot in 6800+frames,thismoduleallowsforupto20independent3Gb/ssignalsin a single 2RU frame.
FEATURESn Software upgradeable support: SD to HD to 3 Gb/sn Accepts any wavelength in 1260-1620 nm rangen Supports single-mode or multi-mode fibern AvailablewithPINorhigh-sensitivityAPDreceiveroptionsn User-selectable re-clocking modes to meet exact needsn Automaticdetection:270Mb/s,1.485Gb/sor2.97Gb/sn Manuallyset:270Mb/s,1.485Gb/sor2.97Gb/sn Automatically bypasses the re-clocker when the signal does not lockn Enforced bypass mode
n Complete module status monitoring via card-edge LEDsn Fully hot-swappablen Upto20modulesin2RU6800+frameoruptotwomodulesinthe
standalone6800+mixboxframen Standard SC-type fiber optic connectorn Optional FC-type or ST-type fiber optic connector
SDI 1
OPTICAL 2
-5dB
m M
ax (A
PD)
OXS
+OP+ SDI 2
28Vi
deo
and
audi
o oV
er o
ptic
sxos+2+op+ Dual-Channel 3G/HD-SDI/SDI/DVB-ASI Fiber Transmitter
TheXOS+2+OP+isanindustry-leading3Gb/s-capableelectrical-to-opticalconversion module able to convert any incoming 3 Gb/s HD-SDI (SMPTE 424M),HD-SDI(SMPTE292M),SDI(SMPTE259M,SMPTE297M)orDVB-ASI (DVB-A010) electrical signal to an optical signal for transmission onsingle-mode or multi-mode fiber. This module comes standard with 270 Mb/s SD-SDI support, and is upgradeable to 1.5 Gb/s HD-SDI and 3 Gb/s SDI support via optional software keys. Output optical option of 1310 nm FPlaser,orCWDMDFBlasermakesthismodulesuitableforawidevarietyof applications.
TheXOS+2+OP+moduleacceptstwoelectricalinputsandprovidestwoop-ticaloutputs.Thismoduleoccupiesasingleslotina6800+frame,allowingfor up to 40 independent 3 Gb/s signals in a 2RU frame.
FEATURESn Software upgradeable support: SD to HD to 3 Gb/sn Supports single-mode or multi-mode fibern Availablein1310nmFPandDFBCWDMwavelengthoptions1
n User-selectable re-clocking modes to meet exact needsn Automaticdetection:270Mb/s,1.485Gb/sor2.97Gb/sn Manuallyset:270Mb/s,1.485Gb/sor2.97Gb/sn Automatically bypasses the re-clocker when the signal does not lockn Enforced bypass moden Complete module status monitoring via card-edge LEDs
n Fully hot-swappablen Upto20modulesina2RU6800+frameoruptotwomodulesinthe
standalone6800+mixboxframen Standard SC/PC-type fiber optic connectorn Optional FC/PC-type or ST/PC-type fiber optic connector
1For any DWDM needs, please contact a Harris representative.
SDI 1
OPT
ICAL
2
XOS+
OP+
OPT
ICAL
1
SDI 2
29
Vide
o an
d au
dio
oVer
opt
ics
oxs+2+op+ Dual-Channel 3G/HD-SDI/SDI/DVB-ASI Fiber Receiver
TheOXS+2+OP+isanindustry-leading3Gb/sfibermodulecapableofre-ceiving optical inputs from single-mode or multi-mode fiber and converting them back to 3 Gb/s HD-SDI (SMPTE 424M), HD-SDI (SMPTE 292M), SDI(SMPTE259M,SMPTE297M)orDVB-ASI(DVB-A010)electricalsignals.Thismodule comes standard with 270 Mb/s SD-SDI support and is upgradeable to 1.5 Gb/s HD-SDI and 3 Gb/s HD-SDI support via optional software keys, elimi-nating equipment replacement costs when upgrading to these standards.
TheOXS+2+OP+moduleacceptstwoindependentfiberinputsandprovidestwoindependentre-clocked3G/HD/SDBNCoutputs.ThismoduleisavailablewithstandardPINopticalreceiversorahigh-sensitivityAPDopticalreceiver.Occupyingasingleslot in6800+frames, thismoduleallows forupto40independent 3 Gb/s signals in a single 2RU frame.
FEATURESn Software upgradeable support: SD to HD to 3 Gb/sn Accepts any wavelength in 1260 - 1620 nm rangen Supports single-mode or multi-mode fibern AvailablewithPINorhigh-sensitivityAPDreceiveroptionsn User-selectable re-clocking modes to meet exact needsn Automaticdetection:270Mb/s,1.485Gb/sor2.97Gb/sn Manuallyset:270Mb/s,1.485Gb/sor2.97Gb/sn Automatically bypasses the re-clocker when the signal does not lockn Enforced bypass mode
n Complete module status monitoring via card-edge LEDsn Fully hot-swappablen Upto20modulesin2RU6800+frameoruptotwomodulesinthe
standalone6800+mixboxframen Standard SC-type fiber optic connectorn Optional FC-type or ST-type fiber optic connector
SDI 1
OPTICAL 2
-5dB
m M
ax (A
PD)
OXS
+OP+ SDI 2
30di
stri
buti
on o
Ver
opti
csda-dHreo6803+d/dx Dual 1x4 or Single 1x8 ACO, E-to-O, 3G/HD/SD/ASI, Reclocking
TheDA-DHREO6803+D/DA-DHREO6803+DXdual-channelDAwithfiberout-put provides two channels of coaxial 3G/HD/SD/ASI signal distribution with cable equalizing and reclocking. This DA uses an SFP LC-type fiber dual trans-mitter with built-in electrical-to-optical (E-to-O) conversion.
TheDA-DHREO6803+Disconfiguredtofunctionasadual-channelDAwithfour outputs for each input (two 1x4). It can also be configured to function asa single-channel1x8DAwithbuilt-inautomatic changeover (ACO).Oneoutputforeachinputisfiber.TheDA-DHREO6803+DcanbeorderedwithouttheSFPtransmitterinstalled(+DX)toallowforexpansionintofiberconnectiv-ity when ready.
The DA-DHREO6803+D/DA-DHREO6803+DX can protect your signal pathwith built-in ACO. The user can select which input is designated as primary and which is designated as secondary.
FEATURESn Dual-channel 1x4 3G/HD/SD/ASI distribution using two coaxial inputs
and six coaxial and two fiber outputsn Cost-effective DA with equalizing and reclockingn Automatic cable equalization on inputsn Automatic or forced rate detectionn Reclocking with automatic or forced bypassn Identical polarity for ASI compatibility on all outputsn Built-inACOprotectionbetweeninputs
n Feedback status reports input signals present and lockedn Card-edge control with LED feedbackn Remote control with status and alarmn 20channelsof1x4or10channelsof1x8distributionina2RU6800+frameInputn TwoBNCcoaxialinputsOutputn Two (1310 nm) SFP LC-type connector transmitters — dual transmitn SixBNCcoaxialoutputs
OUT A
12
3
4
3
1
2
4
OUT B
B IN A
31
dist
ribu
tion
oVe
r op
tics
da-dHroe6803+d Dual 1x4 or Single 1x8 ACO, O-to-E, 3G/HD/SD/ASI, Reclocking
TheDA-DHROE6803+Ddual-channelDAwithfiberinputprovidestwochan-nels of fiber 3G/HD/SD/ASI signal distribution with cable equalizing and re-clocking and coaxial output. This DA uses an SFP LC-type fiber dual receiver with built-in optical-to-electrical (O-to-E) conversion.
TheDA-DHROE6803+Disconfiguredtofunctionasadual-channelDAwithfour outputs for each input (two 1x4). It can also be configured to function as asingle-channel1x8DAwithbuilt-inautomaticchangeover(ACO).Alloutputsare coaxial.
TheDA-DHROE6803+Dcanprotect your signalpathwithbuilt-inACO.Theuser can select which input is designated as primary and which is designated as secondary. This further leverages your investment and allows a backup to feed directly on this DA!
FEATURESn Dual-channel1x4orsingle-channel1x83G/HD/SD/ASIdistributionusing
two fiber inputs and eight coaxial outputsn Cost-effective DA with equalizing and reclockingn Automatic cable equalization on inputsn Automatic or forced rate detectionn Reclocking with automatic or forced bypassn Identical polarity for ASI compatibility on all outputsn Built-inACOprotectionbetweeninputsn Feedback status reports input signals present and locked
n Card-edge control with LED feedbackn Remote control with status and alarmn 20channelsof1x4or10channelsof1x8distributionina2RU6800+frameInputn Two (1310 nm) SFP LC-type connector receivers — dual receiveOutputn EightBNCcoaxialoutputs
IN
A
B
OUT A
2
4 3
OUT B
2
4
1
3
1
32di
stri
buti
on o
Ver
opti
csda-Hrooe6803+d Dual 1x4 or Single 1x8 with Built-In ACO, Optical Distribution, O-to-E, 3G/HD/SD/ASI, Reclocking
TheDA-DHROOE6803+Disidealfordistributionapplicationsrequiringamix-ture of medium-haul and medium/long-haul signal paths within a multifloor facility or across metro-type distances.
This DA can be configured as a dual-channel unit with four outputs for each input (two1x4)orasa single-channel1x8unitwithbuilt-inACOand fouroutputseachforfiberandcoaxial.TheDA-DHROOE6803+DalsofeaturesanSFP LC-type fiber dual transmitter with built-in optical-to-electrical (O-to-E) conversion.
Built-inautomaticchangeover(ACO)protectsyoursignalpathwhileallowingyou to designate which input is primary and which is secondary. This capabil-ity leverages your investment and allows a backup feed directly on the DA. Capable of broadcast-quality performance that exceeds SMPTE specifications, theDA-DHROOE6803+Dcomes standardwith software configurationofallparameters, alarms and remote indication of signal presence.
FEATURESn Dual-channel 1x4 3G/HD/SD/ASI distribution with one fiber input, two
fiber outputs and two coaxial outputs each n Single-channel1x83G/HD/SD/ASIdistributionwithbackupfiberinput,
four fiber and four coaxial outputs n Built-inACOprotectionwhenconfiguredas1x8withabackupfiberinputn Highly cost-effective distribution amp with reclocked outputs and fiber I/O n High density: dual- or single-channel residing on each card and two-slot
back module
n Automatic or forced rate detection and reclocking (reclocking can be bypassed)
n Identical polarity for ASI compliance on all outputs n Feedback status reports input signals present and locked n Card-edge control with LED feedback n Remote control with status and alarm n Provides 20 channels of 1x4 distribution in a 2RU frame with low power
consumption(foruseintheFR6802+QXFframe)n Inputs — two (1310nm) SFP LC-type
connectors, dual receiver n Outputs — four (1310nm) SFP LC-type
connectors,dualtransmitter+fourBNCcoaxial outputs
A
B
OUT B
4
6
DA-
DH
RO
OE6
803+
2
1
2
1
3
4
3
4
OUT AIN
33
dist
ribu
tion
oVe
r op
tics
da-Hro6803+d/dx 1x8, 3G/HD/SD/ASI with Reclocking, Fiber and Coaxial Inputs and Outputs
The DA-HRO6803+D/DA-HRO6803+DX single-channel DA with fiber inputand output provides one channel of coaxial or fiber 3G/HD/SD/ASI signal dis-tribution with cable equalizing and reclocking. This DA uses an SFP-type fiber transceiver with built–in electrical-to-optical (E-to-O) and optical-to-electrical (O-to-E) conversion.
TheDA-HRO6803+D is configured to functionasa single-channelDAwitheightoutputs(1x8).Oneinputandoneoutputarefiber.TheDA-HRO6803+DcanbeorderedwithouttheSFPtransceiver(+DX)installedtoallowforexpan-sion into fiber connectivity when ready.
FEATURESn Single-channel1x83G/HD/SD/ASIdistributionusingonecoaxialorone
fiber input and seven coaxial and one fiber outputsn Cost-effective DA with equalizing and reclockingn Automatic cable equalization on inputsn Automatic or forced rate detectionn Reclocking with automatic or forced bypassn Identical polarity for ASI compatibility on all outputsn Built-inACOprotectionbetweenallinputs(fiberandcoaxial)n Feedback status reports input signals present and lockedn Card-edge control with LED feedbackn Remote control with status and alarmn 10channelsof1x8distributionina2RU6800+frame
Inputn One (1310 nm) SFP LC-type connector transceiver — receive componentn OneBNCcoaxialinputOutputn One (1310 nm) SFP LC-type connector transceiver — transmit componentn SevenBNCcoaxialoutputs
IN
B
1
OUT
2
4 3
6
8
5
7
A
34da
ta o
Ver
opti
csop+dat Serial Data, GPI Transceiver
Working together, a pair of OP+DAT modules can aggregate multiple proto-col data links, transport them over optical fiber to a distant location, andthen deliver them in their original formats. The supporting data links includeGPI in, GPI out, and serial data interconnections in the EIA-recommendedstandardsofEIA-232,EIA-422andEIA-485.
FEATURESn Protocol and data rate transparencyn Six configurable GPI input/output portsn FourbidirectionalRS-232/RS-422/RS-485serialdatachannelsn Support for digital and optical diagnostics, such as loopback, link health
test, test pattern generation and error check, loss of signal detection, laser, and receiver status monitoring and control
n Built-inbidirectionalcommunicationchannelforremotemodulediag-nostic and automatic configuration (for example, when a local GPI in/out port is configured as input, the remote port is automatically configured as output)
n Supportforupto932kb/sdatarateperportforRS-422/RS-485andupto 460 kb/s per port for RS-232
n One fiber output — either single-mode or multi-moden Availablein1310nmFPandCWDMDFBwavelengthoptionsn One fiber input — either single-mode or multi-moden Accepts any wavelength in 1260-1620 nm range
n AvailablewithPINorhigh-sensitivityAPDreceiveroptionsn Standard SC/PC-type fiber optic connectorn Optional FC/PC-type or ST/PC-type fiber optic connectorn Hot-swappablen Complete module status monitoring via card-edge LEDsn Occupiestwoslotsinthe2RUFR6802+QXF6800+frameorthestand-
aloneFR6800+MB6800+mixbox
OPTIC OUT
OPTIC IN
GPI I/O
DATA PORT 1 DATA PORT 3
DATA PORT 2 DATA PORT 4
35
data
oVe
r op
tics
op+etH 10/100/1000 Base-T Ethernet Switch Transceiver
The OP+ETH is a standalone 10/100/1000 Mb/s triple-speed Ethernet switch with five RJ-45 data ports and a dual-fiber interface. It allows up to a Giga-bit of Ethernet connectivity for single wavelength or coarse wave division multiplexing (CWDM) optical transmission systems, while providing local connectivity among the five copper ports and aggregating all copper-based network traffic for transmission over the fiber optic interface. The Ethernet OPTO+ module represents one interface in the wide range of interfaces avail-able in theOPTO+familyofproducts implementedonthe leading6800+processing platform.
FEATURESn 10/100/1000Base-Tauto-sensingEthernetconnectionn Non-blocking,wire-speedperformancen 8KMACaddressforautomaticaddresslearningandagingn AutoMDI/MDIXsupporttodetectandcorrectcrossovercablesforall
portsn Full duplex and half duplex options supportn One fiber output — either single-mode or multi-moden Availablein1310nmFPandCWDMDFBwavelengthoptionsn One fiber input — either single-mode or multi-moden Accepts any wavelength in 1260-1620 nm rangen AvailablewithPINorhigh-sensitivityAPDreceiveroptionsn Standard SC/PC-type fiber optic connector
n Optional FC/PC-type or ST/PC-type fiber optic connectorn Hot-swappablen Complete module status monitoring via card-edge LEDsn Occupiestwoslotsinthe2RUFR6802+QXF6800+frameorthestand-
aloneFR6800+MB6800+mixbox
TX
RX-5 dBm Max (APD)
CH3
CH4
CH2 CH5
OP+ETH+
__PIN __APD
CH1
36rF
oVe
r op
tics
op+lbt L-Band Satellite Optical Transmitter
TheOP+LBTisafiberoptictransmitterthatconvertssatelliteL-Bandsignalsinto the optical domain for transmission over single-mode or multi-mode fi-ber. 1310 nm and CWDM wavelength options make this module suitable for a wide variety of applications.
TheOP+LBTmoduleacceptsoneelectricalL-Bandinput(250MHzto2.25GHz) and provides one fiber output along with an electrical output for moni-toringanddistributionpurposes.TheOP+LBToccupiestwoslotsina6800+frame, allowing for up to 10 independent L-Band signals in a single 2RUframe.
FEATURESn 75 ohms Type F connector inputn AcceptsL-Bandfrequencyrangefrom250MHzto2.25GHzn WidedynamicrangeRFinputfrom-60dBmto-20dBmn Transmits video, audio and data modulation protocols transparentlyn Additional amplified RF output for monitoring or distributionn ~45dBdynamicrangeAGCandmanualoutputsignallevelsettingsn RemoteLNBpoweringandcontrolwithconfigurable+13Vor+18V
with up to 450 mA current DC power supplyn Fully hot-swappable from front of framen Availablein1310nmFPandDFBCWDMwavelengthoptions1
n Supports single-mode or multi-mode fibern SC/PC, FC/PC or ST/PC fiber optic connectorn Dual-slotformfactorin6800+frames,including2RUFR6802+QXFor
deskmountFR6800+MBn Complete module status monitoring via card-edge LEDs
1For any DWDM needs, please contact a Harris representative.
TX
IN
NOT USED
OUT
NOT USED
OP+LBT+ _13
_C27
_C
29 _
C31
_C
33 _
C35
_C
37 _
C43
_C
45 _
C47
_C
49 _
C51
_C
53 _
C55
_C
57 _
C59
_C
61
37
rF o
Ver
opti
csop+lbr L-Band Satellite Optical Receiver
TheOP+LBRisafiberopticreceiverthatiscapableofreceivinganopticalsignal from either single-mode or multi-mode fiber and converting it back to anelectricalL-Bandsignal.
TheOP+LBRmoduleacceptsoneoptical inputandprovidestwoelectricalL-BandTypeFoutputs.TheOP+LBRoccupiestwoslots ina6800+frame,allowingforupto10independentL-Bandsignalsinasingle2RUframe.
FEATURESn 75 ohms Type F connector outputn AcceptsL-Bandfrequencyrangefrom250MHzto2.25GHzn Transmits video, audio and data modulation protocols transparentlyn ~45dBdynamicrangeACGn Fully hot-swappable from front of framen AvailablewithstandardPINopticalreceiverorahigh-sensitivityAPD
optical receivern Supports single-mode or multi-mode fibern SC/PC, FC/PC or ST/PC fiber optical connectorn Dual-slotformfactorin6800+frames,
including2RUFR6802+QXFordeskmountFR6800+MB
n Complete module status monitoring via card-edge LEDs
RX
NOT USED
OUT
NOT USED
OUT
OP+LBR+
38co
urse
WaV
e di
Visi
on M
ulti
plex
ing
HoMs+op+cxxd, oHds+op+cxxd Active Multiplexers and Demultiplexers
The HOMS+OP+ and the OHDS+OP+ products represent active multiplexers and demultiplexers, respectively. Active multiplexers combine the functions of electrical-to-optical transmitters and passive CWDM multiplexers into one dense module. Conversely, active demultiplexers combine the functions of passive CWDM demultiplexers and optical-to-electrical receivers. Multiplex-ers have four or eight HD/SD/ASI inputs that are converted into four or eight optical wavelengths. The optical wavelengths are then optically multiplexed onto one single-mode fiber optic cable. The demultiplexer is the reverse of the multiplexer.
For each type of product (multiplexer, demultiplexer), there are four varia-tions corresponding to the upper eight, lower eight, upper four and lower fourwavelengthsofthestandardITU-TG.694.216wavelengths.Anoptical“express port” allows cascading individual products to completely fill (all 16) CWDM wavelengths, therefore providing the greatest level of multiplexing efficiency.
FEATURESn CWDMsupportaccordingtoITU-TG.694.2overtheentirespectrumof
1270 - 1610 nmn Expandable system in groupings of four or eight wavelengths, allowing
cost-effective system configuration up to the complete 16-wavelength CWDM standard
n Electrical interface support: HD-SDI, SD-SDI, ASI, with automatic and manualreclockingratesetting(143,177,270,360,540,1485Mb/s)forSDI
n Occupiesonlytwo6800+frameslots(outof20)foreithermultiplexerordemultiplexer modules
n Standard SC-type fiber optic connector
HD/SD IN 2 HD/SD IN 1
HD/SD IN 3
HD/SD IN 4
HD/SD IN 5
HD/SD IN 7
OPT EXPRESS IN
FIBER OUT
HD/SD IN 6
HD/SD IN 8
OHDS+OP+CL4D-CU4DHOMS+OP
HD/SD OUT 1A HD/SD OUT 1B
HD/SD OUT 2A
HD/SD OUT 2B
HD/SD OUT 3A
HD/SD OUT 3B
FIBER IN
OPT EXPRESS OUT
HD/SD OUT 4A
HD/SD OUT 4B
OHDS+OP+CL8D-CU8D
HD/SD OUT 2 HD/SD OUT 1
HD/SD OUT 3
HD/SD OUT 4
HD/SD OUT 5
HD/SD OUT 7
FIBER IN
OPT EXPRESS OUT
HD/SD OUT 6
HD/SD OUT 8
39
oMs6800+cxxd, ods6800+cxxd Passive CWDM Single-Mode Optical Multiplexers
TheOMS6800+productsarepassive four-andeight-channelmultiplexersfor the CWDM system.
FEATURESn Passive designn Provide options for connectors including SC, ST, FCn CWDMmodulescomplywithITU-TG.694.2standardsforCWDM
wavelengths.n Do not require low water peak fiber to utilize all 16 wavelengths and
operate over wavelengths between 1271 nm and 1611 nm
TheODS6800+productsarepassivefour-andeight-channeldemultiplexersfor the CWDM system.
FEATURESn Passive designn Provide options for connectors including SC, ST, FCn CWDMmodulescomplywithITU-TG.694.2standardsforCWDM
wavelengthsn Do not require low water peak fiber to utilize all 16 wavelengths and
operate over wavelengths between 1271 nm and 1611 nm
cour
se W
aVe
diVi
sion
Mul
tipl
exin
g
ODS6800+CU4DOMS6800+CU4D
OPT EXPRESS OUTOPT IN
1591 nm OUT 1551 nm OUT
1611 nm OUT 1571 nm OUT
ODS6800+CU8DOMS6800+CU8D
OPT EXPRESS OUTOPT IN
1551 nm OUT 1471 nm OUT
1571 nm OUT 1491 nm OUT
1591 nm OUT 1511 nm OUT
1611 nm OUT 1531 nm OUT
OPT EXPRESS IN OPT OUT
1591 nm IN 1551 nm IN
1611 nm IN 1571 nm IN
OPT EXPRESS IN OPT OUT
1551 nm IN 1471 nm IN
1571 nm IN 1491 nm IN
1591 nm IN 1511 nm IN
1611 nm IN 1531 nm IN
40op
tica
l sp
litt
ers/
coM
bine
rsobs6800+cd Passive Full-Spectrum Optical Splitter and Combiner
The OBS6800+CD is a full spectrum optical splitter and combiner. TheOBS6800+CDdividesorcombineswavelengthsbetween1310nmand1550nm with low insertion loss and high isolation, with bidirectional application on one signal mode fiber.
FEATURESn Passive designn Divides or combines 1310 nm and 1550 nm with low-insertion loss and
high isolationn Bidirectionalapplicationononesingle-modefiber
FULL SPECTRUM IN/OUT
1.3 umIN/OUT
1.55 umIN/OUT
OBS6800+CD
41
opti
cal
spli
tter
s/co
Mbi
ners
opss+op+d Optical Protection Switch
The OPSS+OP+D optical protection switch and 50-50 power splitter repre-sent integral parts of an end-to-end optical fiber network design, and provide path redundancy and network resiliency.
The 50-50 power splitter and protection switch are critical in redundant path optical fiber network design or for optical signal monitoring purposes where the power budget allows for a 50% loss of power.
FEATURESn Intelligent auto-switching and auto-changeovern Programmable switching threshold and changeover hysteresisn Comprehensive signal and card status monitoringn Single-mode fiber supportn Multiple wavelength support (1260 nm to 1610 nm range)n Standard SMPTE SC/PC optical connectorsn Full hot-swapping capability with no fiber disconnection/reconnection
requiredn Capability of supporting single optical
wavelengths at 1310 nm, 1550 nm, or up to 16 CWDM wavelengths (ITU-TG.694.2compliant)
IN-1
IN-2
OUT
OPSS+OP+D
42op
tica
l sp
litt
ers/
coM
bine
rsobs+op+5050d Optical Power Splitter (50% Split)
The optical protection switch and 50-50 power splitter represent integral parts of an end-to-end optical fiber network design, and provide path redun-dancy and network resiliency.
The 50-50 power splitter and protection switch are critical in redundant path optical fiber network design or for optical signal monitoring purposes where the power budget allows for a 50% loss of power.
FEATURESn Intelligent auto-switching and auto-changeovern Programmable switching threshold and changeover hysteresisn Comprehensive signal and card status monitoringn Single-mode fiber supportn Multiple wavelength support (1260 nm to 1610 nm range)n Standard SMPTE SC/PC optical connectorsn Full hot-swapping capability with no fiber disconnection/reconnection
requiredn Capability of supporting single optical
wavelengths at 1310 nm, 1550 nm, or up to 16 CWDM wavelengths (ITU-TG.694.2compliant) IN
OUT-1
OUT-2
SC/PC
OBS+OP+5050D
43
opti
cal
test
and
Mea
sure
Men
toFi-20b Optical Fiber Identifier
The Harris®OFI-20Bisahandheld,easy-to-useopticaltestinstrumentthatidentifies optical fibers without any damage by detecting the optical signals being transmitted through the fibers. Through non-destructive macro-bend detection technology and mechanism damp technology, it avoids opening the fiber at the splice point for identification and interruption of service.
TheOFI-20Bcanaccuratelydetect theoptical signals, signaldirectionandthe presence of modulated tones. It can test all kinds of fiber, including fibers of250µmand900µmandribbonaswellasjacketedfibersof2mmand3 mm.
Withitswidedynamicrange,OFI-20Bcanefficientlyidentifythewide-spec-trumsignals,suchassignalsinCATVsystemsandEDFA.ThereforeitcanbeusedinallthephysicallayertestingofSONET/SDHandDWDMsystems.
FEATURESn Handheld, easy to usen Equipped with corresponding adapter for bare fiber and tail fibern Intensity display of optical signaln Low-battery indicationn Buzzindicationfunctionn Display of transmission direction lightn Identification of various signal frequency: 270 Hz, 1 kHz, 2 kHzn CE, FCC, certificates
44op
tica
l te
st a
nd M
easu
reM
ent
olt-20a Optical Loss Tester
The Harris® OLT-20A is a handheld op-tical loss tester multi-functional testing instrument for optic fiber networks. The useful applications include installation, routine inspection and daily mainte-nanceofMAN,WAN,andCATVsystemsas well as for laboratory testing and re-search work.
The OLT-20A optical test meter integrates a laser source and power meter module in one set, and can perform power test-ing and link loss testing of optic fiber network conveniently. It can test within the shortest time and efficiently avoid the mistakes caused by not matching laser source and power meter. The unit is highly praised for its excellent quality, safety, value and fast testing features.
FEATURESn Pocket-size, large LCD displayn Multi-wavelength measurementsn DirectlossmeasurementunitsindBn Link loss testingn AbsolutepowermeasurementunitsindBmorµWn Modulation in CW and modulated frequenciesn 270 Hz, 1 kHz and 2 kHz modulated frequenciesn Dual-wavelength output in single optic outputn Dual-way powering systemn Low-power indicatorn Auto-off function conserving battery lifen CE, FCC, FDA certificates
45
opti
cal
test
and
Mea
sure
Men
topM-15 Optical Power Meter
The Harris® OPM-15A and OPM-15Boptical power meters are compact, lightweight and easy-to-use testing in-strument for optic fiber networks with unique characteristics of quick testing. This unit is widely favored for its quality, value, reliability, accuracy and safety.
The pocket-size OPM-15 can support accurate testing of single mode and multimode optical fiber systems, with features of large LCD display, damp and shock proof design and dual-way powering system. The internal micro-processor and linear amplifier technol-ogy ensure long-time accuracy.
Ideal for laboratory and field applications by using concise function keys to implement quick high accuracy testing. In laboratories, LANs,WANs, andCATVsystems,andlong-distanceopticalnetwork,theopticalpowermetertogether with Harris stabilized laser sources, can be used to identify optical fiber, measure optical attenuation, verify continuity and evaluate fiber link transmission quality.
FEATURESn Pocket-size, large easy-to-read LCD display, easy to usen Fast response, no warm upn Measure up to six wavelengths through a single connectorn DirectlossmeasurementunitsindBn AbsolutepowermeasurementunitsindBmn Interchangeable fiber-optic adapters (choice of FC, SC or ST)n Dual-way powering systemn Damp-, dust- and shock-proof design, ideal for field operationn Auto-off function conserves battery lifen CE, FCC certificates
46op
tica
l te
st a
nd M
easu
reM
ent
otM-20 Optical Test Meter
The Harris® OTM-20A and OTM-20C are inte-grated testers for fiber optic networks. These handheld optical test meters feature intelligent design, multi-functionality, fast test, dual-way powering system and a large LCD display.
The OTM-20 models have large memory ca-pacity and can transfer testing data to a PC by associated software for analyzing, report gen-eration and printing. The multi-functional kitbag provides convenience for field and laboratory testing. The OTM-20 series is favored for its strong integrated functions, outstanding qual-ity, value, stability and safety.
The optical test meter combines the functional-ity of the laser source and optical power meter and is ideal for both single-mode and multi-
mode fiber checkouts. The unit provides measurements of absolute and rela-tive power. Additionally, the device is able to activate a self-testing system to measure optical loss of fiber cable and passive devices. This is the ideal piece of test equipment for field installation, routine inspection and mainte-nanceofopticaltelecomandCATVsystemsaswellastestinglaboratoriesand research work.
FEATURESn Support quick test, intelligent operationn Graphicinterface;large,easy-to-readLCDn MeasurementunitsindB,dBmandW(ormW)n Large memory capacity (up to 4000 measurements)n Support auto-test of optic fiber lossn Draw changing curve of power valuen Support the optical power alarm functionn Automatic data storagen Damp-,dust-andshock-proofdesign;idealforfieldoperationn Interchangeable fiber-optic adapters (choice of FC, SC, or ST)n RS-232 data upload port and PC software for data analyzing, graphic
drawing and reportingn Low-battery indicator and auto recharging displayn Dual-way powering systemn Auto-off function conserving battery lifen CE, FCC, FDA certificates
47
opti
cal
test
and
Mea
sure
Men
tpalMotdr-s20 Optical Time Domain Reflectometer
The Harris® palmOTDR-S20 is an optical fault locating and analyzing tool for optical fiber networks. With its excellent performance and higher user value, it offers an innovative test method for telecommunication network.
The palmOTDR-S20 is more economical as a fault locating and analyzing tool than the traditional OTDR. The palmOTDR is handheld, compact, lightweight and easy to use. The unique hot key design makes it faster and more convenient to review and analyze the event. It has powerful functions, such as supporting av-eraging and real-time test mode. The unit can be used for single-mode (1310/1550 nm) fiber applications. With its multi-functional carrying softbag, which is convenient for both field and
laboratory testing, the palmOTDR has become the indispensable and ideal tool for fiber networks construction, daily check ad maintenance in FTTx, WAN,andCATVsystems.
The palmOTDR-S20 can save and transfer the measurement curves data to a PC by the software “TraceManager” for further analyzing, reporting and printing.
FEATURESn Lightweight, portable and ideal for FTTxn Full functions, single-mode fiber applicationsn High-precision measurement, large memory capacity (300 test curves)n Without hard disk design, anti-dust, damp-, and shock-proof for field
testingn RS-232/USBdatauploadportn PC software for measurement data analyzing and reportingn LCD indicators for battery charging and LD lasing statusn NiMHrechargeablebatterysupportsfourhoursofcontinuousoperationn Low-battery annunciatorn CE, FCC, FDA certificatesn Drop test up to one meter
48op
tica
l te
st a
nd M
easu
reM
ent
sls Stabilized Laser Source
The Harris® SLS series is a family of pocket-size, lightweight and easy-to-use stabilized laser source. Based onadvanced technologies of precision laser control, the SLS-21 has been designed to provide high capability of laser source for engineering, R&D, and equipment manufactures, and is favored for its quality, value, reliability and safety.
This stabilized laser source is the ideal tool for optical network installation, trouble shooting and maintenance, with features including damp- and shock-proof design and a dual-way powering system.
The SLS series provides a stabilized optical signal at multi-wavelength and together with any of the Harris optical power meters, can be used to identify optical fiber, measure optical attenuation, verify continuity and evaluate fiber link transmission quality.
FEATURESn Pocket-size, easy to usen Fast response, no warm upn Damp-, dust- and shock-proof designn Modulation in CW and modulated frequenciesn Single/dual/triplex wavelength selectablen Interchangeable fiber-optic adapters (choice of FC, SC or ST)n Highly stabilized output of optical signaln Dual-way powering systemn Auto-off function conserves battery lifen CE, FCC, FDA certificates
49
opti
cal
test
and
Mea
sure
Men
tVls-20a Visible Laser Source
The Harris®VLS-20Aisavisiblered la-ser source for finding breaks and tight bends in optical fibers. The unit gener-ates red laser, and the visible red laser that escapes from optical fibers allows for testingandfindingbreaks in LANs,verifying continuity, checking the valid-ity of patch cables or looking for cracked fiber in splice cases, bad connectors, and tight bends in fiber cable.
The VLS-20A is regarded as a perfectcomplementary tool for the palmOTDR, due to its capability of finding breaks in the blink area of the OTDR
FEATURESn Pocket-size, easy to usen Fast response, no warm upn CW/1 Hz modulationn One meter drop testn CE, FCC, FDA certificates
50sy
ncHr
oniz
er/c
onVe
rter
x85™ Multiple-Application Video and Audio Platform
TheX85™ frame synchronizer and converter features eight AES inputs and outputs with up to 32 channels of internal audio processing — and packs the industry’s most advanced technology into a space-saving 1RU frame. Along withsingle-,dual-andmultiple-pathprocessing,theX85offersoptionsforsoftware-enabled 3 Gb/s upgrade capability and linear frame rate conversion as well as program delay, color correction and logo generation/insertion.
FEATURESn Adds another up-, down- and cross-converter for true dual-path
processingn Two auto-detected inputs for 270 Mb/s, 1.5 Gb/s, 3 Gb/sn Audio, data and metadata embedding/de-embedding for 270 Mb/s,
1.5 Gb/s, 3 Gb/sn Active Format Description (AFD) for 270 Mb/s,1.5 Gb/s, 3 Gb/s
n Moremodesofoperation;sidepanelfillusingvideoinput,e.g.,I-WINGSapplication;framerateconversion;profanitydelay;1080Psf-23.98out-put(single-channelmode);outputfollowinputmode(usingautodetect)
n AVversionofferseightAESinputandoutputwith32channelsn Optional memory module and software keys for frame rate converter or
profanity delayn Fiber inputs and outputs — may be a field retrofitn Video-to-audiotimingmeasurement(V2A)for3Gb/sn Color corrector and legalizer for options .27/1.5/3 Gb/s
51
sync
Hron
izer
/con
Vert
erx50™ Frame Synchronizer/Converter
TheX50™ is a cost-effective frame synchronizer and converter — a best-in-class, single-channel platform that delivers the exceptional quality and func-tionality that have come to define the Harris line of 1RU processors. It enables the processing of analog and digital baseband video and audio via its easy-to-use controls, and supports standard- and high-definition formats, as well asoptional3Gb/s1080pLevelAandLevelBprocessingforhybridtelevisionandproduction systems.TheX50also featureseightanalogand fourAESinputs and outputs with 16 channels of embedded audio processing.
FEATURESn Frame sync/delay, proc amp, noise reduction, clipping, color correction n Advanced motion detection for up-/down-/cross-conversion and aspect
ratio conversion n Two switchable auto-sensing 3D/HD/SD inputs
n TwoaspectratioconverterswithfullcontroloverH/Vsizeandpositionn Audio de-embed/embed, sync, gain, invert, delay with 16 channels (four
groups) processingn Data and metadata processingn Built-invideotestandaudiotonegeneratorsn Control and monitoring
- 100/100 Ethernet connectivity
-Built-inWebserver
- Local control panel -X75/X85controlpanels - Four GPI inputs and outputsn Optional fiber input and output available
52ro
uter
splatinuM™ Innovative Large-Scale Routing
The Platinum™ line of routing switchers combines a highly robust architecture with the flexibility required to future-proof your infrastructure. Designed to support high-quality routing of a large number of signals for 24/7 operation, these routing switchers are well-suited to network, local broadcaster, mobile production, cable, telco, military, gov-ernment and corporate applications. Platinum also combines the best of both high-bandwidth video signal routing and an internal time-division multiplexing (TDM) architecture to pro-vide the world’s only embedded audio infrastructure router housed within a single chassis.
FEATURESn Mixed-signal routingn Upto256x256in15RU(NOTE:upto512x512discretestereo/audio)n Upto512x512in28RU(NOTE:upto1024x1024discretestereo/audio)n Neweight-channelframesyncinputcardforwildfeedingestandaudio
shuffling
n Internal multiplexer/demultiplexer provides discrete audio functionality in a single-frame solution
n Modular I/O in groups of eightn Front-loading, hot-swappable modules for 24/7 operationn Redundant power supplies, controllers and signal pathsn Enhanced control and monitoringn Videoroutingsupportn 1080p(3Gb/s)signalrouting(anysize)n Almost any digital video signal from 3 Mb/s to 3 Gb/s including:
HD-SDI, SD-SDI, ASI, SMPTE 310, SMPTE 305, coaxial or fiber, etc.n Industry-first, environmentally friendly output boardn Audio routing supportn Digital audio signals including balanced and unbalanced AESn Support for up to 16 embedded AES streams per video inputn Optionaldaughtercardtosupportupto128embeddedchannelsn Optional fiber input and output available
53
note
snotes
54no
tes
notes
Harris is a registered trademark of Harris Corporation. Trademarks and tradenames are the property of their respective companies.
Broadcast Communications Division25 Dyas Road | North York, ON Canada M3B 1V7 | Tel: (416) 445 9640
www.broadcast.harris.com
©2010 Harris CorporationGD_FIBER_0610
For more information, please visit www.broadcast.harris.com/opto+.
North America +1 800 231 9673
Caribbean and Latin America +1 786 437 1960
Europe, Middle East and Africa +44 (0) 118 964 8200
Asia, Pacific Rim +852 2776 0628
