Light sleeper

17
LightSlee per

Transcript of Light sleeper

LightSleeper

About LightSleeper

The biggest innovation in sleep since the pillow.

You’ll find LightSleeper to be the

most natural thing in the world. LightSleeper is a very clever device that projects a soothing light on the ceiling. The light moves in a circular motion above the bed. You follow the light with your eyes for a few minutes, and you begin to drift off.

A light? For sleeping? Isn’t that contradictory?

We have been testing LightSleeper in real world situations for many months now. It has proven itself to be effective, both in getting people to sleep in the first place, as well as helping them get back to sleep when they wake up in the middle of the night. LightSleeper’s ease of use (just tap it to turn it on) makes it ideal for use at any time, at home or while travelling.

Why does this work? Following the light has the effect of relaxing the mind, a necessary prerequisite to entering a deep, refreshing sleep, a product designer with insomnia.

How it works

LightSleeper helps you get to sleep in a completely natural way.

When you turn on the device and turn off the lights in your bedroom LightSleeper projects a light on the ceiling above your bed.

The light moves in a controlled, circular, and soothing manner. Follow the light with your eyes, while lying in bed. Gradually, your mind will relax and you’ll be ready to sleep well and enjoy a longer, better quality sleep.

Following the light with your eyes imitate the action of reading, but without stimulating the mind; hence you’re relaxed and able to fall asleep and stay asleep. LightSleeper shuts itself off after 30 minutes, and it’s easy to turn on again should you happen to wake up for some reason.

How to use it

As easy as-well, falling asleep

1. Correct placement of the LightSleeper

LightSleeper should be placed at your bedside, where it can project onto your ceiling without obstruction. It should be positioned so you can see the light on the ceiling easily, without straining your neck or eyes. Your bedroom should be as dark as possible (consider using lined curtains) and, ideally, the temperature should be between 13 and 24°C (55 and 75°F).

2. Operating LightSleeper

The switch at the back of LightSleeper turns it on. A button on the base allows you to adjust the brightness of the light. The green indicator lights tell you the brightness level; five is the maximum brightness. Each time you push the brightness button the brightness will increase until you’ve reached level five; at that point, pushing the button will decrease brightness.

The optimal level of brightness for most people is when you can just see the spot of light projected on the ceiling. It needn’t be any brighter than that.

3. Changing the ModeLightSleeper has a two modes: constant and pulsing.Press and hold the brightness button for two seconds to toggle between both of these modes. When LightSleeper is in pulsing mode the green indicator lights will gently pulse.

4. Battery Charge

Charging LightSleeper’s rechargeable batteries takes 10-12 hours; this will provide for up to 10 complete 30 minute cycles or 8-10 days in standby mode. Of course, you may also use LightSleeper, while it is plugged into the main’s power.LightSleeperis proudly designed & built in Britain

More than a great idea

LightSleeper is helping real people sleep.

We’ve been researching LightSleeper for over two years now, and the results have been eye-opening (so to speak): 78% of users report a significant improvement in their ability to get to sleep, stay asleep and improve the quality of their sleep as well.

Some example from users.

1. Female 45-54, Teacher

Her problem: Took at least 60 minutes to get to sleep.Tried medication and relaxation tapes but with no success.

With LightSleeper: Got to sleep much faster.If she awoke in the middle of the night, was able to get back to sleep easily.As a result, got an extra hour’s sleep per night.

2. Male, 25-35, IT Consultant

His problem: Got less than 3 hours sleep per night.Got to sleep within 30 minutes. However, woke up in the middle of the night and couldn’t get back to sleep again.

With LightSleeper:

Woke during the night and used the product to get back to sleep.Increased his sleep to 6-8 hours per night.

3. Male 45-54, Bank Manager

His Problem:

Slept only 3-6 hours a night. Woke during the night and struggled to get back to sleep.

With LightSleeper:

Gets an extra two hours’ sleep per night.

In his own words:

“I was amazed by how quickly my sleeping pattern changed for the better. Within four days use I had slept solidly for 7 hours, the first time in years and on the fifth day I slept through to the 6:25 alarm – I can’t remember the last time that this happened.”“The design and operation are both unobtrusive and fitted into the bedroom environment well.”LightSleeperis proudly designed & built in Britain