LIFT SYSTEM FOR BOX ENCLOSURE/PUSH FLAPcdn.futureautomation.co.uk/Tech/lsm4-tech.pdf · LIFT SYSTEM...

WWW.FUTUREAUTOMATION.NET

LSM-BE/PF 4

TECHNICAL SHEETISSUE 001

SHEET 1

LIFT SYSTEM FOR BOX ENCLOSURE/PUSH FLAP

UK +44 (0) 1438 833577 US +1 (603) 742 9181

SPECIFICATION MEASUREMENTSMaximum Screen Height 670mm (26.4")

Screen Sizes (approx.) 42" - 55"

Maximum Lifting Capacity 50Kg (110lb)

Maximum Lifting Capacity (Marine) 30Kg (66lb)

Internal Cabinet Height 820mm (32.3")

Decibel Rating 52 dB

Packaging Dimensions 1010 x 850 x 330mm (39.8 x 33.5 x 13")

Shipping Weight 34Kg (75lb)

Movement Type Motorised

Power Supply Required 110V - 240V AC

Power Consumption 250 - 500W

Power Consumption Standby 3W

Mounting Patterns Supported VESA 400, 300, 200 W x 400, 300, 200 H

Control Options IR Remote, RS232, Contact Closure, RF Available

Product Options / Features Specific B&O and Loewe mounts / adapters, Custom RAL paint finishes

Package Contents Mechanism, IR remote control, Push Flap Kit, Box Enclosure Kit

Marine Suitable Yes


LSM-BE/PF 4


SHEET 2


UK +44 (0) 1438 833577 US +1 (603) 742 9181

5.9

150

2.052

8.1207

A

To MainsPower

DETAIL A

POWER CABLE

PP

1.538

Maximum Possible Depth of Conduit

TOP VIEW

CABLE ROUTINGThe LSM has an easily removable Mount Cover that cables from the screen can be routed underneath. Cables then travel through the centre of the Mount Boss and into the beam. Cables must be routed carefully to prevent any interference with the LSM beam as it operates.

Screen and Mechanism cables should be routed to a control box outside of the cabinet via an opening in the back of the cabinet or a conduit leading to the bottom.

SCREEN CABLESMECHANISM CABLES


LSM-BE/PF 4


SHEET 3


UK +44 (0) 1438 833577 US +1 (603) 742 9181

32.3820

InternalCabinetHeight

Internal Cabinet Width =Screen Width + 100 [3.9]

Minimum Width = 850 [33.4]

27.4695

InternalBox Enclosure

Height

0.820

0.820

Box EnclosureInternal Width =

Screen Width+ 40mm [1.6]

0.820

Max Thicknessof Base andCabinet Top

0.820

Minimum ScreenHeight fromCabinet Top

B

B

CC4.2108

Mount to Backof Mechanism

26.4670

MaximumScreenHeight

6.1154

D

SECTION B-B

0.820

Minimum Distancefrom Screen to

inside of Cabinet

0.13

Base Panel toCabinet Aperture

SECTION C-C

Aperture Depth =Screen Depth + 83 [3.25]

(Minimum 121 [4.75])

1.846

DETAIL D

LSM-BE 4 - MECHANISM UP - IN CABINET


LSM-BE/PF 4


SHEET 4


UK +44 (0) 1438 833577 US +1 (603) 742 9181

32.3820




0.820

Box EnclosureInternal Width =

Screen Width+ 40mm [1.6]

0.820


5.6142

Minimum ScreenHeight from Base

of Cabinet

27.4695

InternalBox Enclosure

Height

E

E

19.7500

Minimum width of openingin rear face of box enclosureAperture Depth =

Screen Depth + 83 [3.25](Minimum 121 [4.75])

Aperture Width = Screen Width +80mm [3.1]

G

Shown with tapered Box EnclosureLid in square Cabinet Aperture.

A tapered Cabinet Aperture can beused to improve the fit.

0.410

Minimum thickness ofBox Enclosure Back Cover

DETAIL G

4.2108

Back of Cabinetto Mount

26.4670Max

ScreenHeight

F

SECTION E-E

DETAIL F

LSM-BE 4 - MECHANISM DOWN - IN CABINET


LSM-BE/PF 4


SHEET 5


UK +44 (0) 1438 833577 US +1 (603) 742 9181

Box Enclosure Lid Width = Cabinet Aperture Width -2mm [0.1]

LID - TOP VIEW

Lid Depth =Cabinet Aperture Depth

Depth -2mm [0.1]

0.820

Base Panel Width = Cabinet Aperture Width -6mm [0.2]

80.076.0

3.13.0 THRU

2.5

64.50 BASE PANEL - TOP VIEW

VIEWING SIDE

Base Depth =Cabinet Aperture Depth

-6mm [0.2](Minimum 115mm [4.4])

BOX ENCLOSURE BASE PANEL AND LID DETAILS

NOTE: A tapered Box Enclosure Lid creates a good fitin the Cabinet Aperture and helps the Box Enclosure tolocate within the cabinet.


LSM-BE/PF 4


SHEET 6


UK +44 (0) 1438 833577 US +1 (603) 742 9181

32.3820




0.820


0.820

Minimum ScreenHeight fromCabinet Top

H

H

II4.2108

Mount to Backof Mechanism

26.4670

MaximumScreenHeight

6.1154

J

SECTION H-H

0.820 Minimum distance

from Screen to inside of apertureSECTION I-I


(Minimum 121 [4.75])

DETAIL J

LSM-PF 4 - MECHANISM UP - IN CABINET


LSM-BE/PF 4


SHEET 7


UK +44 (0) 1438 833577 US +1 (603) 742 9181

32.3820




0.820


5.6142

Minimum ScreenHeight from Base

of Cabinet

K

K


(Minimum 121 [4.75])

Aperture Width = Screen Width +80mm [3.1] 4.2108

Back of Cabinetto Mount

26.4670Max

ScreenHeight

SECTION K-K

LSM-PF 4 - MECHANISM DOWN - IN CABINET


LSM-BE/PF 4


SHEET 8


UK +44 (0) 1438 833577 US +1 (603) 742 9181

Base Panel Width = Cabinet Aperture Width - 6mm [0.2]

80.076.0

3.13.0 THRU

1.75

44.50

BASE PANEL - TOP VIEW

VIEWING SIDE

Base Panel Depth =Cabinet Aperture Depth

-29mm [0.25](Minimum 89mm [3.3]

Push Flap Lid = Cabinet Aperture Width - 6mm [0.2]

L

L

Flap Panel Depth =Cabinet Aperture

-6mm [0.25](Minimum 112mm [4.4]

M

SECTION L-L

0.410

0.12

DETAIL M

A step is required on the front ofthe flap to meet a step in thefront edge of the cabinet aperture

PUSH FLAP BASE PANEL AND LID DETAILS

LID - BOTTOM VIEWVIEWING SIDE


LSM-BE/PF 4


SHEET 9


UK +44 (0) 1438 833577 US +1 (603) 742 9181

V400

V300

V200

15.75400

11.8300

7.9200

17.3440

Highest PossibleCentreline of Mount

15

.75

400

9.6245

Lowest PossibleCentreline of Mount

15

.75

400

15.75400

CL

SCREEN MOUNT ADJUSTABILITY

CL

A standard adjustable height VESA 400 mount is included. This is alsocompatible with VESA 300 and 200 mounting patterns

Separate VESA 300 and 200 mounts are available.


LSM-BE/PF 4

TECHNICAL SHEETISSUE 001SHEET 10


UK +44 (0) 1438 833577 US +1 (603) 742 9181

Box Enclosure Top

Box Enclosure Top Support

Box Enclosure Back Section

Box Enclosure Base

The LSM is fixed to the back of thecabinet with wood screws.

Box Enclosure Back Cover

Screen mount must be removedfor installation of Base Panel

The LSM is fixed to the back of thecabinet with wood screws.

Screen mount easilyremoved with concealed bolts

The Flap Panel is attachedto a hinge at the back of thecabinet aperture.

MECHANISM INSTALLATION OVERVIEW


LSM-BE/PF 4



UK +44 (0) 1438 833577 US +1 (603) 742 9181

32.3820

19.7501

22.3568

MECHANISM - UP POSITION

32.2818BackPlate

Height

31.3795

6.5164

OVERALL MECHANISM DIMENSIONS

MECHANISM - DOWN POSITION


LSM-BE/PF 4



UK +44 (0) 1438 833577 US +1 (603) 742 9181

LIFT SYSTEM FOR BOX ENCLOSURE/PUSH FLAPcdn.futureautomation.co.uk/Tech/lsm4-tech.pdf · LIFT SYSTEM...

Documents

Transcript of LIFT SYSTEM FOR BOX ENCLOSURE/PUSH FLAPcdn.futureautomation.co.uk/Tech/lsm4-tech.pdf · LIFT SYSTEM...